| submitted | available | document details (if available) | source link |
|---|---|---|---|
| April 02 2013 | May 02 2013 | Adobe PDF Library 9.0 |
| various | User Manual | Users Manual | 3.42 MiB | April 02 2013 / May 02 2013 |
Version 1.0 | 01/15/2013 User Manual Wireless N H.264 Day/Night Network Camera DCS-933L Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revision Revision 1.00 Date Description January 15, 2013 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2012-2013 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. Table of Contents Table of Contents Manual Overview...............................................................2 Manual Revision ............................................................................ 2 Trademarks ..................................................................................... 2 Product Overview ..............................................................4 Package Contents ......................................................................... 4 System Requirements ................................................................. 4 Introduction ................................................................................... 5 Features ............................................................................................ 6 Hardware Overview ..................................................................... 7 Front View ................................................................................ 7 Rear View ................................................................................. 8 Installation .........................................................................9 Zero Configuration Setup ........................................................10 Camera Installation Wizard .....................................................13 Windows Users ....................................................................13 Mac Users...............................................................................14 Manual Hardware Installation ................................................15 Wireless Installation Considerations ....................................16 WPS - Push Button Setup .........................................................17 mydlink ...........................................................................................18 Configuration ...................................................................19 Using the Web Configuration Interface ..............................19 Live Video ......................................................................................20 Setup ...............................................................................................21 D-Link DCS-933L User Manual Wizard .....................................................................................21 Internet Connection Setup Wizard ........................22 Network Setup ..............................................................24 Wireless Setup ......................................................................25 Repeater Setup ....................................................................26 DDNS ......................................................................................27 Image Setup .........................................................................28 Video .......................................................................................29 Audio .......................................................................................30 Motion Detection ...............................................................31 Sound Detection .................................................................32 Mail ..........................................................................................33 FTP ............................................................................................35 Time and Date ......................................................................37 Day/Night Mode .................................................................38 Maintenance ................................................................................39 Admin .....................................................................................39 System ....................................................................................40 Firmware Upgrade ..............................................................41 Status ..............................................................................................42 Device Info ............................................................................42 Active User ............................................................................43 Troubleshooting ..............................................................44 Technical Specifications ..................................................47 3 Section 1 - Product Overview Product Overview Package Contents DCS-933L Wireless N H.264 Day/Night Network Camera CAT5 Ethernet Cable Power Adapter Manual and Software on CD Quick Install Guide Mounting Kit Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements Computer with Microsoft Windows 8/7/Vista/XP, or Mac with OS X 10.6 or higher PC with 1.3GHz or above and at least 128MB RAM Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and enabled Existing 10/100 Ethernet-based network or 802.11g/n wireless network D-Link DCS-933L User Manual 4 Section 1 - Product Overview Introduction Congratulations on your purchase of the DCS-933L Wireless N H.264 Day/Night Network Camera. The DCS-933L is a versatile and unique solution for your small office or home. Unlike a standard webcam, the DCS-933L is a complete system with a built-
in CPU and web server that transmits high quality video images for security and surveillance. The IR LED provides around the clock surveillance regardless of the lighting conditions. The DCS-933L can be accessed remotely, and controlled from any PC/Notebook over your local network or through the Internet via a web browser. The simple installation and intuitive web-based interface offer easy integration with your Ethernet/
Fast Ethernet or 802.11 b/g/n wireless network, and its Repeater Mode even allows you to increase your wireless networks coverage. The DCS-933L also comes with remote monitoring and motion detection features for a complete and cost-effective home security solution. Your DCS-933L is mydlink-enabled, which means that you can view and manage your camera from anywhere over the Internet through the mydlink website or through the mydlink mobile app for iOS and Android. You can view your live video feed, take snapshots, set a recording schedule, and more!
D-Link DCS-933L User Manual 5 Section 1 - Product Overview Features Easy to Use and mydlink-Enabled for Easy Access and Management The DCS-933L is a standalone surveillance camera that requires no special hardware or software, and can run independently even without a PC. This camera is also mydlink-enabled, which means you can view and manage your camera through the mydlink website, or through the mydlink mobile app for iOS and Android. IR LEDs for Day and Night functionality The built-in infrared LEDs enable night time viewing of up to 16 feet (5 meters). H.264 Codec for Smooth, Space-Efficient Video This camera supports use of the H.264 video codec, which gives you high-quality video with reduced bandwidth requirements. This means that you can enjoy smoother, more reliable video streaming over the Internet, and less disk space is required to save recordings. Motion and Sound Triggered Notifications and Recordings The DCS-933L can send e-mail notifications with snapshots or video clips whenever motion or sound is detected. You can customize areas of the video to monitor for motion to keep watch over entryways, and you can set volume limits to detect when a loud sound is picked up by the camera. Supports a Variety of Platforms Supporting TCP/IP networking, HTTP, and other Internet related protocols. The DCS-933L can also be integrated easily into other Internet/Intranet applications because of its standards-based features. 802.11b/g/n Wireless or Ethernet/Fast Ethernet Support The DCS-933L offers wireless 802.11b/g/n and Ethernet/Fast Ethernet connectivity, making the DCS-933L easy to integrate into your existing network environment. The DCS-933L works with a 10Mbps Ethernet based network or 100Mbps Fast Ethernet based network for traditional wired environments, and works with 802.11b/g/n routers or access points for added flexibility. The Site Survey feature also allows you to view and connect to any available wireless networks. Repeater Mode Increases the Range of Your Wireless Network You can use the DCS-933Ls Repeater Mode to extend the range of your wireless network, giving your home or office better wireless coverage. Remote Monitoring Utility This camera also includes the D-ViewCam software, which adds enhanced features and functionality that helps you create a full surveillance system for up to 32 cameras. With D-ViewCam, you can view multiple cameras at the same time, record video, and set up scheduled and triggered recordings. D-Link DCS-933L User Manual 6 Section 1 - Product Overview Hardware Overview Front View Light Sensor Camera Lens IR LED Microphone D-Link DCS-933L User Manual 7 Section 1 - Product Overview Rear View Power Connector Ethernet Port Power and Link LED Reset Button WPS LED WPS Button Camera Stand D-Link DCS-933L User Manual 8 Section 2 - Installation There are three ways to set up your camera:
Installation Zero Configuration Setup: If you have a mydlink-enabled router, this is the easiest way to set up your camera. Refer to page 10. Camera Installation Wizard: If you do not have a mydlink-enabled router, use the Camera Installation Wizard to guide you through setup and intial configuration of your camera. Refer to page 13. Manual Hardware Installation: This section shows you how to manually set up your camera, though in order to use the mydlink features of your camera, you will still need to run the Camera Installation Wizard. Refer to page 15. D-Link DCS-933L User Manual 9 Section 2 - Installation Zero Configuration Setup If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router. Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-933L and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access your camera from the www.mydlink.com website to manage and monitor your DCS-933L. Connect the Ethernet Cable Use the included Ethernet cable and plug it into the camera. Plug the other end into an available port on your router. If you wish to use your camera wirelessly, you will be able to remove the cable after Zero Configuration Setup is complete. Attach the External Power Adapter Connect the power adapter to the power connector on your camera, then plug the power adapter into a wall outlet. D-Link DCS-933L User Manual 10 Section 2 - Installation Check Your mydlink Account Open a web browser and login to your mydlink account. The mydlink page will check for new devices and display a New device Found! pop-up notification in the bottom-left corner. Click the notification to continue. A summary and confirmation notification will appear with the automatically configured details. Make a note of the details and click Yes to add the camera to your account. D-Link DCS-933L User Manual 11 Section 2 - Installation Zero Configuration will navigate to the mydlink Live View tab for your camera where you will see a screen similar to the following. If you wish to connect your camera to your router wirelessly, you can simply disconnect the Ethernet cable and move the camera to its intended location;
your router's wireless settings have been automatically transferred to the camera, and no further configuration is required. Your camera is now set up, and you can skip to mydlink on page 18 to learn more about the mydlink features of this camera, or to Configuration on page 19 for advanced configuration of your camera. D-Link DCS-933L User Manual 12 Section 2 - Installation Camera Installation Wizard Windows Users Insert the Installation CD-ROM into your computers optical drive to start the autorun program. Simply click Set up your Cloud Camera to go through the Setup Wizard, which will guide you step-by-step through the installation process from connecting your hardware to configuring your camera and registering it with your mydlink account. Note: If the autorun program does not open, go to My Computer, browse to your CD drive, and double-click on the setup.exe file. D-Link DCS-933L User Manual 13 Section 2 - Installation Insert the Installation CD-ROM into your computers optical drive. On the desktop, open your CD drive and double-click on the SetupWizard file. Mac Users After about 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to configuring your camera and registering it with your mydlink account. D-Link DCS-933L User Manual 14 Section 2 - Installation Manual Hardware Installation If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps. Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero Configuration Setup. Connect the Ethernet Cable Use the included Ethernet cable and plug it into the camera. Plug the other end into an available port on your router. Attach the External Power Adapter Connect the power adapter to the power connector on your camera, then plug the power adapter into a wall outlet. Configure Your Camera Refer to Configuration on page 19 for information on how to configure your camera. Optional: Use WPS to Connect Wirelessly You can use WPS to connect your camera to your network wirelessly. For more information, refer to WPS - Push Button Setup on page 17. If your router does not support WPS, you will still be able to set up your cameras wireless settings in the cameras web interface. D-Link DCS-933L User Manual 15 Section 2 - Installation Wireless Installation Considerations The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your Network Camera) - each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters). 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DCS-933L User Manual 16 Section 2 - Installation WPS - Push Button Setup Alternatively, you may create a secure wireless connection using the WPS Button on the back of the camera. To create a WPS connection:
Step 1 Make sure the camera is plugged in, then press and hold the WPS button for three seconds. The blue WPS status LED will start blinking. Step 2 Press the WPS button on your router within 60 seconds. The WPS button is usually on the front or side of your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your routers User Manual. The DCS-933L will automatically create a secure wireless connection to your router. While connecting, the green LED will flash and your camera will reboot. WPS Button D-Link DCS-933L User Manual 17 Section 2 - Installation mydlink After registering your DCS-933L camera with a mydlink account in the Camera Installation Wizard, you will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following:
For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to find the latest instruction guide for your camera's mydlink features. D-Link DCS-933L User Manual 18 Section 3 - Configuration Configuration Using the Web Configuration Interface After completing the Camera Installation Wizard, you are ready to use your camera. The cameras built-in Web configuration interface is designed to allow you to easily access and configure your DCS-933L. At the end of the wizard, enter the IP address of your camera into a web browser, such as Internet Explorer. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK. Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20. D-Link DCS-933L User Manual 19 19 Section 3 - Configuration Live Video The Live Video screen shows you the live video feed from your camera.For information on how to configure your Live Video streams, refer to Video on page 29. Video Compression Format:
Click the H.264 or MJPEG radio button to choose which stream to view. Zoom:
Click on these buttons to zoom in and out of the video. Audio:
Click on these buttons to turn audio playback on and off. D-Link DCS-933L User Manual 20 20 Section 3 - Configuration Setup Wizard You may choose to configure your network by using the Internet Connection Setup Wizard that includes step-by-step instructions. Otherwise, you may manually configure your connection using the Manual Internet Connection Setup. Note: To register your camera with mydlink and enable its mydlink-related features, you will need to use the Camera Installation Wizard. Please refer to Camera Installation Wizard on page 13 for more details. D-Link DCS-933L User Manual 21 21 Section 3 - Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Click Next to continue. Select what kind of Internet connection your camera should use:
DHCP Connection (Default): If you are connected to a router, or are not sure which connection to use, select DHCP Connection. Static IP Address: This will allow you to manually enter your network settings for the camera. If you are not sure what settings to enter, check with your Internet Service Provider or network administrator. PPPoE Connection: If your camera is directly connected to a DSL modem, you may need to use PPPoE. Enter the username and password provided to you by your Internet Service Provider. Click Next to continue. D-Link DCS-933L User Manual 22 22 Section 3 - Configuration If you have a Dynamic DNS account and would like the camera to update your IP address automatically, select Enable and enter your host information. Otherwise, simply select Disable. Click Next to continue. Enter a name for your camera. Click Next to continue. Configure the correct time to ensure that all events are triggered, captured, and scheduled at the right time. Click Next to continue. This page displays your configured settings. Click Apply to save and activate your changes, or click Back to change your settings. D-Link DCS-933L User Manual 23 23 Section 3 - Configuration Network Setup This section allows you to configure your network settings. DHCP:
Select this connection if you have a DHCP server running on your network and would like a dynamic IP address to be updated to your camera automatically. Static IP Client:
You may obtain a static or fixed IP address and other network information from your network administrator for your camera. A static IP address will ease you for accessing your camera in the future. IP Address: The fixed IP address Subnet Mask: The default value is 255.255.255.0. Used to determine if the destination is the same subnet. Default Gateway: The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: Primary domain name server that translates names to IP addresses. Secondary DNS: Secondary domain name server to backup the Primary DNS. PPPoE Settings:
If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account. You can get this information from your Internet service provider (ISP). Port Settings:
You may configure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be set to a number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to 1010, users must type http://192.168.0.100:1010 instead of only http://192.168.0.100. UPnP Settings:
Enable this setting to configure your camera as a UPnP device in the network. D-Link DCS-933L User Manual 24 24 Section 3 - Configuration Wireless Setup This section allows you to set up and configure the wireless settings on your camera. Enable Wireless:
SSID:
Check this box to allow your camera to connect to your network wirelessly. Enter the network name(SSID) of the wireless network you want to connect to. You can also click the Site Survey button below to choose an available network and fill in settings automatically. Channel:
If you are using Ad-Hoc as your connection mode, select the same channel that is being used by yourwireless network. Connection Mode:
Select the connection mode used by your wireless network. In most cases, you should select Infrastructure. Ad-Hoc is only used if your camera is directly connecting to another PC or device. Site Survey:
Clicking this button will allow you to select an available wireless network to connect to, and will fill in the necessary settings for you. Wireless Security Mode:
Select the wireless security mode used by your wireless network. If you select WEP or WPA-PSK/WPA2-PSK, enter the password for your wireless network in the text box that appears. D-Link DCS-933L User Manual 25 25 Section 3 - Configuration Repeater Setup This section allows you to setup and configure the wireless network extending feature of your camera. Repeater Mode allows your camera to extend the range of your existing wireless network. You can choose to use the same network name and settings as your existing wireless network, or you can create a new one. Check this box to enable Repeater Mode. Enable Repeater Mode:
Host Wireless Network Name:
This shows the name of the Host wireless network that the camera is connected to and will extend. Extended Wireless Network Name
(SSID):
Maximum Clients Allowed to Connect:
Security Mode:
Select an option:
Same as Host Wireless Network Name: Your extended network will use the same name and settings as your Host network. Your devices can use the same wireless information to connect to both the Host and Extended networks. Create a New Wireless Network Name: This allows you to manually set the name and security used for the extended network. You will need to add this information for each wireless device that connects to this Extended network. Set the maximum number of clients that are allowed to connect to the extended network. If you choose to Create a New Wireless Network Name, you can set your wireless security options here. D-Link DCS-933L User Manual 26 26 Section 3 - Configuration DDNS This section allows you to configure the DDNS setting for your camera. DDNS will allow all users to access your camera using a domain name instead of an IP address. Enable:
Click to enable the DDNS function. Server Address:
Select your Dynamic DNS Server from the pull down menu. Host Name:
Enter the host name of the DDNS server. User Name:
Enter your username or e-mail used to connect to the DDNS. Password:
Enter your password used to connect to the DDNS server. D-Link DCS-933L User Manual 27 27 Section 3 - Configuration Image Setup This section allows you to configure the image settings for your camera. Enable Antiflicker:
If you have lights flickering in your camera video, try enabling antiflicker. Otherwise, you should leave this disabled. Flip Image:
Select this box to vertically flip the video. Mirror:
Horizontally flip the video. Note: If the camera is installed upside down, Flip Image and Mirror should both be checked Brightness Control:
Contrast Control:
Saturation Control:
Allows you to adjust the brightness level. Allows you to adjust the contrast level. Allows you to adjust the saturation level. D-Link DCS-933L User Manual 28 28 Section 3 - Configuration Video This section allows you to configure the video settings for your camera. Video Profile:
This section allows you to change the Resolution, FPS, and Quality. Encode Type:
Your camera has separate settings for the H.264 and MJPEG video streams. Resolution:
Select the desired video resolution from three formats: 640x480, 320x240, and 160x112. Higher settings offer better quality, but will require more bandwidth to stream. FPS:
Select the frame rate(FPS) to use for the video stream. Higher settings offer better quality, but will require more bandwidth to stream. JPEG Quality:
Select one of five levels of image quality: Highest, High, Medium, Low, and Lowest. View Mode:
Select the default encoding to use when viewing your video on the Live Video page. Light Frequency:
Select the frequency used by your lighting and power to help reduce image flicker. D-Link DCS-933L User Manual 29 29 Section 3 - Configuration Audio This section allows you to adjust the audio settings for your camera. Note: Please wait a few seconds for the camera to adjust the audio after making changes. Audio Settings:
Volume Settings:
You may Enable or Disable the camera audio feed. Select the desired volume percentage level. D-Link DCS-933L User Manual 30 30 Section 3 - Configuration Motion Detection Motion detection allows you to mark areas of your cameras video to monitor for motion, which can be used to trigger snapshots or recordings. Refer to Mail on page 33 and FTP on page 35 for more details. Motion Detection:
Select whether you want to enable or disable the motion detection feature of your camera. Time:
Specify whether you want to Always have motion detection enabled, or according to a Schedule that you define. Sensitivity:
Specify the amount of difference required to determine whether there was motion. Detection Areas:
Use your mouse to click on the areas of the video that you would like to monitor for motion. D-Link DCS-933L User Manual 31 31 Section 3 - Configuration Sound Detection Sound detection allows you to detect when there is a loud sound in the area, which can be used to trigger snapshots or recordings. Refer to Mail on page 33 and FTP on page 35 for more details. Sound Detection:
Select whether you want to enable or disable the sound detection feature of your camera. Time:
Specify whether you want to Always have motion detection enabled, or according to a Schedule that you define. Detection Level:
Specify the volume level that a sound must exceed in order to be detected. D-Link DCS-933L User Manual 32 32 Section 3 - Configuration Mail This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use, check with your e-mail service provider. SMTP Server Address:
Sender e-mail Address:
Receiver e-mail Address:
This is the domain name or IP address of your external e-mail server. This is the e-mail address listed as the sender for your notification e-mails. This is the e-mail address that your notification e-mails will be sent to. User Name:
If the SMTP server uses authentication, enter your user name. Password:
If the SMTP server uses authentication, enter your password. For example, if you want to use Gmail with SSL-TLS for e-mail notifications, you can follow the setup procedure as below:
Step 1 - Enter smtp.gmail.com in SMTP Server Address. Step 2 - Change the SMTP server port number from 25 to 465. Step 3 - Enter your gmail e-mail address in Sender E-mail Address. Step 4 - Enter the destination e-mail address in Receiver E-mail Address. Step 5 - Enter the user name required to access the SMTP server. Step 6 - Enter the password required to access the SMTP server. Step 7 - Select SSL-TLS and then click Save Settings. Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail account listed above. Note: You can also use STARTTLS, which will use SMTP server port number 587. Note: If you want to use a Yahoo SMTP server, the SMTP server address will be different between each registered region, and only SMTP port 465 is supported for SSL-TLS. D-Link DCS-933L User Manual 33 33 Section 3 - Configuration Enable the e-mailing of images to an e-mail account:
Enabling this will allow snapshots to be e-mailed to you in different ways:
Choosing Always will e-mail snapshots continuously based on the E-mail Interval specified. Choosing Schedule will allow you to schedule when to start and stop the e-mailing of snapshots. Select Motion/Sound Detection if you would like the camera to e-mail images only when motion or sound is detected. You can choose whether to e-mail a snapshot immediately, or e-mail 6 snapshots together, with 3 frames before and after motion/sound was detected. You can also set the Frame interval time to specify how far apart the snapshots should be. E-mail Interval:
This sets the limit for how frequently e-mail notifcations will be sent. This can be set from 1 to 65535 seconds. Enable the e-mailing of video clips to an e-mail account:
Enabling this will allow video clips to be e-mailed to you in different ways. This is the same as e-mailing images, as specified above, but will take video clips according to the Video Limit settings you specify. Test E-mail Account:
This will send a test e-mail according to the e-mail settings you have specified above. D-Link DCS-933L User Manual 34 34 Section 3 - Configuration FTP This section allows you to configure your camera to send snapshots and video clips to an FTP server. Host Name:
Enter the IP address of the FTP server that you will be connecting to. Port:
Enter the port of the FTP server that you will be connecting to. User Name:
Enter the user name of your FTP server account. Password:
Enter the password of your FTP server account. Path:
Enter the destination path/folder to save files to on the FTP server. Passive Mode:
Enable the uploading of images to an FTP server:
Enabling passive mode may help you reach your FTP server if your camera is behind a router protected by a firewall. Enabling this will allow snapshots to be uploaded in different ways:
Choosing Always will upload snapshots continuously based on the Image Frequency specified. Choosing Schedule will allow you to schedule when to start and stop the uploading of snapshots. Select Motion/Sound Detection if you would like the camera to upload images only when motion or sound is detected. Image Frequency:
Set how frequently you want images to be taken and uploaded. You can choose to upload by frames per second, or by seconds per frame. Base File Name:
Set what you want the base file name to be for your snapshots. D-Link DCS-933L User Manual 35 35 Section 3 - Configuration File:
Select how you want uploading of snapshots to be handled:
Overwrite will replace the old snapshot with the new one. This means you will only have one snapshot that is updated every time a new one is taken. Date/Time Suffix will add the date and time to the end of the snapshot file name. You can also choose to make subfolders based on a period of time you specify to help you organize your snapshots. Sequence Number Suffix will add a number to the end of the snapshot file name up to the number you specify, after which the oldest files will be overwritten. Test FTP Server:
Clicking on the Test button will send a test JPEG snapshot to the FTP server specified above to make sure that your settings are correct. This will send a test e-mail according to the e-mail settings you have specified above. D-Link DCS-933L User Manual 36 36 Section 3 - Configuration Time and Date This section allows you to configure the settings of the internal system clocks for your camera. Time Zone:
Select the time zone for your region from the drop down menu. Synchronize NTP Server:
Enabling this will allow the camera to update its clock automatically from an NTP server. Select the NTP server closest to you, and select whether you want to apply daylight saving corrections. Set the Date and Time Manually:
If Synchronize NTP Server is disabled, you can set the date and time manually. You can also click on the Copy Your Computers Time Settings to automatically set the date and time based on your computers settings. D-Link DCS-933L User Manual 37 37 Section 3 - Configuration Day/Night Mode This section allows you to configure when Day and Night modes are used. Day mode uses the infrared cut filter to provide a corrected color image for times where there is available lighting. Night mode moves the filter out of the way to use all available light, and turns on the IR LED illuminators to allow for clear black and white video in dark areas with little to no light. Auto:
This mode will automatically switch between Day and Night mode based on the amount of available lighting. Manual:
Always Day Mode:
Always Night Mode:
This mode allows you to manually switch between modes through the Live Video page. This sets the camera to always use Day mode. This sets the camera to always use Night mode. Day Mode Schedule:
This sets the camera to use Day mode during the times you specify, and will switch to Night mode outside the times you specify. D-Link DCS-933L User Manual 38 38 Section 3 - Configuration Maintenance Admin This section allows you to change the administrators password and configure the server settings for your camera. You can also manage the user account(s) that are allowed to access to your camera. Admin Password:
To change the admin password used to log into the web interface, enter the old password, then enter the new password and retype it in the next text box, then click Apply. Camera Name:
Specify a name for your camera LED Control:
Select Normal to enable the LED on the front of the device, or select Off to disable the LED. Turning this off may be useful if you do not want the camera to be noticable. User Access Control:
Select Enable to enable user access control or Disable to allow only the administrator account to access the camera. Snapshot URL Authentication:
Select Enable to allow access to the current camera snapshot via the web address indicated. OSD Time:
Select Enable to allow the current time to be added to the camera video, and select a color to use for the text. Add User Account:
You can create new users to provide viewing access for your cameras video. User accounts will only be able to access the Live Video section of the web configuration interface, but cannot access any other parts or change any settings. To create a new user, enter a user name, password, and retype the password, then click Add. A maximum of 8 user accounts can be created. User List:
Displays the account names of authorized users. You can modify or delete an account by clicking on its modify or delete icon. D-Link DCS-933L User Manual 39 39 Section 3 - Configuration System This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera. Save To Local Hard Drive:
Click the Save Configuration button to save the current camera configuration to your local PC. Load From Local Hard Drive:
To load a previously saved configuration, click the Browse... button, select your saved configuration file, then click the Restore Configuration From File button. Restore To Factory Default:
Click the Restore Factory Defaults button to reset all settings back to the factory defaults. Please note that this will erase any changes you have made to the settings of the camera. Rebbot The Device:
Click the Reboot the Device button to reboot the camera. D-Link DCS-933L User Manual 40 40 Section 3 - Configuration Firmware Upgrade Your current firmware version and date will be displayed on your screen. You may go to the D-Link Support Page to check for the latest firmware versions available. To upgrade the firmware on your DCS-933L, download the latest firmware from the D-Link Support Page to your local hard drive. Click the Browse... button and select the firmware file, then click the Upload button to start the firmware upgrade. Warning: The firmware upgrade process must not be interrupted or the camera may be damaged. When upgrading firmware, do not unplug the camera or your PC or close your web browser until the process is complete. It is also highly recommended that you use a wired connection for your camera and PC when upgrading firmware. D-Link DCS-933L User Manual 41 41 Section 3 - Configuration This section displays all the detailed information about your device and network settings. Status Device Info D-Link DCS-933L User Manual 42 42 Section 3 - Configuration Active User This page lists all the active users information including the User Name, IP address, and the time that camera access began. D-Link DCS-933L User Manual 43 43 Section 4 - Troubleshooting Troubleshooting 1. What is Remote Access? How do I enable it?
Remote Access allows you to access your camera from any PC connected to the Internet through a web browser. This lets you view your camera feed and manage your cameras settings when youre away from home. To enable Remote Access, simply go through the Camera Installation Wizard included on the Installation CD that came in your package. You can also download the wizard from the following websites:
DCS-933L: http://DCS-933L.mydlink.com After going through the wizard, you should see Remote Status: Enabled on the summary page. If you see Remote Status: Disabled, make sure that:
...the front LED on your camera is lit solid green
...your Internet connection is working
...your routers LAN & WAN connections are working properly
...your router has UPnP enabled (if your router does not support UPnP, please refer to Appendix A)
...your router can get a public IP
...your router is upgraded to the latest firmware
...you have tried rebooting your router by unplugging it, then plugging it back in After checking the above items, you can click the Retry button to refresh the summary screen to see if Remote Access has been enabled. 2. What can I do if I forget my password?
If you forget your password, you will need to perform a hard reset of your camera. This process will change all your settings back to the factory defaults. To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 3 seconds while your camera is plugged in. D-Link DCS-933L User Manual 44 Section 4 - Troubleshooting 3. Why does the LED not light up?
The power supply might be faulty. Confirm that you are using the provided DC 5V power supply for this network camera. Verify that the power supply is correctly connected. If the camera is functioning normally, the LED may have been disabled. See Admin on page 39 for information about how to enable the LED. 4. Why is the cameras network connection unreliable?
There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (bytes = 32 time = 2 ms). Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not functioning properly. Please confirm the power for the devices are well connected and functioning properly. 5. Why does the Network Camera work locally but not remotely?
This might be caused by the firewall protection. Check the Internet firewall with your system administrator. The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN. For more information, please refer to the section about installing your camera behind a router. Make sure that the Network Camera isnt conflicting with any Web server you may have running on your network. The default router setting might be a possible reason. Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN. 6. Why does a series of broad vertical white lines appear through out the image?
It could be that the image sensor has become overloaded when it has been exposed to bright light such as direct exposure to sunlight or halogen lights. Reposition the camera into a more shaded area immediately, as prolonged exposure to bright lights will damage the sensor. 7. The camera is producing noisy images. How can I solve the problem?
The video images might be noisy if the camera is used in a very low light environment. D-Link DCS-933L User Manual 45 Section 4 - Troubleshooting 8. The images are poor quality, how can I improve the image quality?
Make sure that your computers display properties are set to at least 6-bit color. Using 16 or 256 colors on your computer will produce dithering artifacts in the image, making the image look as if it is of poor quality. You may also need to check your image settings to make sure the brightness, contrast, and other settings are set properly. For more, refer toImage Setup on page 28. 9. Why are no images available through the Web browser?
ActiveX might be disabled. If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the Internet Options menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer with a version number lower than 6, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Network Camera. D-Link DCS-933L User Manual 46 Technical Specifications Technical Specifications SYSTEM REQUIREMENTS Microsoft Windows 8/7/Vista/XP, or Mac with OS X 10.6 or higher PC with 1.3 GHz or above and at least 128 MB RAM Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and enabled NETWORKING PROTOCOL IPV4, ARP, TCP, UDP, ICMP DHCP Client NTP Client (D-Link) DNS Client DDNS Client (Dyndns and D-Link) SMTP Client FTP Client HTTP Server PPPoE UPnP Port Forwarding BUILT-IN PROTOCOL 10/100BASE-TX Fast Ethernet 802.11b/g/n WLAN WIRELESS CONNECTIVITY 802.11b/g/n Wireless with WEP/WPA/WPA2 security WPS WIRELESS TRANSMIT OUTPUT POWER 18.7 dbm for 802.11b, 23.7 dbm for 802.11g, 23.6 dbm for 802.11n (HT20), 22.4 dbm for 802.11n (HT40) SDRAM 64 MB D-Link DCS-933L User Manual FLASH MEMORY 8 MB RESET BUTTON Reset to factory default VIDEO CODECS H.264 MJPEG JPEG for still images VIDEO FEATURES Adjustable image size and quality Time stamp and text overlay Flip and Mirror RESOLUTION 640 x 480 at up to 30 fps 320 x 240 at up to 30 fps 160 x 112 at up to 30 fps LENS Focal length: 3.15 mm, F2.8 SENSOR VGA 1/5 inch CMOS sensor IR LED 5 meter illumination distance with 4 LEDs and light sensor MINIMUM ILLUMINATION Color: 1 lux @ F2.8 (Day) B/W: 0 lux @ F2.8 (Night) 47 Technical Specifications VIEWING ANGLE Horizontal: 45.3 Vertical: 34.5 Diagonal: 54.9 DIGITAL ZOOM Up to 4x 3A CONTROL AGC (Auto Gain Control) AWB (Auto White Balance) AES (Auto Electronic Shutter) POWER Input: 100-240 V AC, 50/60 Hz Output: 5 V DC, 1 A External AC-to-DC switching power adapter STORAGE TEMPERATURE
-20 C to 70 C (-4 F to 158 F) HUMIDITY 20-80% RH non-condensing EMISSION (EMI), SAFETY & OTHER CERTIFICATIONS FCC Class B IC C-Tick CE DIMENSIONS (W x D x H) Including the bracket and stand:
65.8 x 65 x 126 mm Camera only:
27.2 x 60 x 96 mm WEIGHT 96.2 g (without bracket and stand) MAx POWER CONSUMPTION 4 W OPERATION TEMPERATURE 0 C to 40 C (32 F to 104 F) D-Link DCS-933L User Manual 48
,, FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance."
This product uses the FCC Data API but is not endorsed or certified by the FCC