submitted | available | document details (if available) | source link |
---|---|---|---|
May 05 2005 | May 05 2005 |
various | Users Manual 2 | Users Manual | 2.05 MiB | May 05 2005 |
DWL-G650M Users Manual Networking Basics Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000,/Me/98SE. Go to Start>Control Panel>Network Connections Select Set up a home or small ofce network When this screen appears, click Next. D-Link Systems, Inc. 21 DWL-G650M Users Manual Networking Basics Please follow all the instructions in this window:
Click Next. In the following window, select the best description of your computer. If your computer connects to the Internet through a router, select the second option as shown. Click Next. D-Link Systems, Inc. 22 DWL-G650M Users Manual Networking Basics Enter a Computer description and a Computer name (optional.) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. D-Link Systems, Inc. 23 DWL-G650M Users Manual Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard congures the computer. This may take a few minutes. D-Link Systems, Inc. 24 DWL-G650M Users Manual Networking Basics In the window below, select the option that ts your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. Click Next. D-Link Systems, Inc. 25 DWL-G650M Users Manual Networking Basics Please read the information under Heres how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. Click Next. D-Link Systems, Inc. 26 DWL-G650M Users Manual Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed conguring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. D-Link Systems, Inc. 27 DWL-G650M Users Manual Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed conguring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. D-Link Systems, Inc. 28 DWL-G650M Users Manual Networking Basics Naming your Computer To name your computer using Windows XP, please follow these directions:
Click Start (in the lower left corner of the screen). Right-click on My Computer. Select Properties. Select the Computer Name Tab in the System Properties window. You may enter a Computer Description if you wish; this eld is To rename the computer and join a domain, click Change. D-Link Systems, Inc. 29 DWL-G650M Users Manual Networking Basics Naming Your Computer In this window, enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK. Checking the IP Address in Windows XP All wireless adapter-equipped computers in your network must be in the same IP address range (see Getting Started in this manual for a denition of IP address range.) To check on the IP address of an adapter, please do the following:
Right-click on the Local Area Connection icon in the task bar. Click on Status. D-Link Systems, Inc. 30
This product uses the FCC Data API but is not endorsed or certified by the FCC