| submitted | available | document details (if available) | source link |
|---|---|---|---|
| March 05 2018 | April 05 2018 |
| various | User Manual | Users Manual | 2.59 MiB | March 05 2018 / April 05 2018 |
Version 1.00 Cert| 2018/04/30 User Manual D-Fend AC2600 Wi-Fi Router DIR-2680 DRAFT FOR CERTIFICATION USE ONLY D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Preface Manual Revisions Revision 1.00 Date Description April 30, 2018 Certification Manual Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple, Apple logo, Safari, iPhone, iPad, iPod touch and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome browser, Google Play and Android are trademarks of Google Inc. Internet Explorer, Windows and the Windows logo are trademarks of the Microsoft group of companies. Copyright 2018 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. This device is an Energy Related Product (ErP) designed to be always on. It can be turned off through a power switch to save energy when it is not needed. Switched Off: 0.5 watts Power Usage D-Link DIR-2680 User Manual i DRAFT FOR CERTIFICATION USE ONLY Table of Contents Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 5 Hardware Overview ..................................................................... 6 LED Indicators ........................................................................ 6 Back Panel ............................................................................... 7 Installation .........................................................................8 Before you Begin ........................................................................... 8 Wireless Installation Considerations ...................................... 9 Hardware Setup ..........................................................................10 Completing Setup ......................................................................13 QRS Mobile App ..................................................................14 Setup Wizard ........................................................................19 Configuration ...................................................................23 Home ..............................................................................................24 Internet ...................................................................................24 DIR-2680.................................................................................25 Connected Clients ..............................................................26 USB Device ............................................................................27 Settings ..........................................................................................28 Wizard .....................................................................................28 Internet ...................................................................................28 IPv6 .....................................................................................38 VLAN ...................................................................................58 D-Link DIR-2680 User Manual Wireless ..................................................................................60 Guest Zone .......................................................................63 Network ..................................................................................64 USB Sharing ..........................................................................66 Features ..........................................................................................67 QoS Engine............................................................................67 Firewall ...................................................................................68 IPv4/IPv6 Rules ...............................................................70 Port Forwarding ..................................................................71 Virtual Server ...................................................................72 Website Filter ........................................................................73 Static Routes .........................................................................74 IPv6 .....................................................................................75 Dynamic DNS .......................................................................76 IPv6 Host ...........................................................................77 Quick VPN ..............................................................................78 Management ................................................................................80 Time & Schedule .................................................................80 Time ....................................................................................80 Schedule ...........................................................................81 System Log ............................................................................82 System Admin ......................................................................84 System ...............................................................................85 User & Device .......................................................................86 User .....................................................................................86 Device ................................................................................88 Upgrade .................................................................................89 ii Table of ContentsDRAFT FOR CERTIFICATION USE ONLY Statistics .................................................................................90 Quick VPN .........................................................................91 Important Information .............................................................92 Quick VPN Server Setup Instructions ..................................93 iOS Devices ...................................................................................94 Mac OS X ........................................................................................98 Windows 7 .................................................................................. 101 Windows 8.1/8 .......................................................................... 105 Windows 10 ............................................................................... 111 Android ....................................................................................... 114 Connect a Wireless Client to your Router ....................118 WPS Button ................................................................................ 118 Windows 10 ............................................................................. 119 Windows 8 ................................................................................ 121 WPA/WPA2 ......................................................................... 121 Windows 7 ................................................................................ 123 WPA/WPA2 ......................................................................... 123 WPS ....................................................................................... 126 Windows Vista ......................................................................... 130 WPA/WPA2 ......................................................................... 131 Troubleshooting ............................................................133 Wireless Basics ...............................................................137 What is Wireless? ...................................................................... 138 Tips ................................................................................................ 140 Wireless Modes ......................................................................... 141 Networking Basics .........................................................142 D-Link DIR-2680 User Manual Check your IP address ............................................................ 142 Statically Assign an IP address ............................................ 143 Wireless Security ......................................................... 144 What is WPA? ................................................................ 144 Technical Specifications ................................................145 Regulatory Information ................................................146 iii Table of ContentsDRAFT FOR CERTIFICATION USE ONLY Product Overview Package Contents DIR-2680 Wi-Fi Configuration Note Wi-Fi Configuration Card Ethernet Cable Power Adapter Quick Installation Guide If any of the above items are missing or damaged, please contact your local reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-2680 will cause damage and void the warranty for this product. D-Link DIR-2680 User Manual 1 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY System Requirements Network Requirements An Ethernet-based cable or DSL modem IEEE 802.11ac/n/g/b/a wireless clients 10/100/1000 Ethernet Computer with the following:
Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements:
Internet Explorer 10 or higher Firefox 28 or higher Safari 6 or higher Chrome 28 or higher QRS Mobile Requirements Windows Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. iPhone/iPad/iPod Touch, Android, or Windows smartphone or tablet. (Please refer to the mobile app's store page to check whether your device is compatible) D-Link DIR-2680 User Manual 2 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY Introduction The D-Link DIR-2680 D-Fend AC2600 Wi-Fi Router shares your Internet connection over a blazing-fast Gigabit Wireless AC connection of up to 2600 Mbps (Up to 1723 Mbps 5 GHz Wireless AC and up to 800 Mbps 2.4 GHz Wireless N)1, using advanced AC beamforming technology to significantly outperform 802.11n and other 802.11ac devices. Equipped with one Gigabit WAN/Internet port and four Gigabit LAN ports to provide wired speeds of up to 10 times faster than standard 10/100 ports, the DIR-2680 creates the best networking experience to date. Featuring four antennas and a 4 x 4 Multiple In Multiple Out (MIMO) antenna configuration, the DIR-2680 offers better data rates, fewer dead-spots, more coverage, and higher reliability. Operating exclusively in the 5 GHz band, the DIR-2680's 802.11ac wireless connections avoid the crowded 2.4 GHz band, allowing you faster speeds while still maintaining backwards compatibility with older 802.11n/g/b devices. The DIR-2680 prepares your home to become a Connected Home by bringing Wi-Fi to places your old signal cant reach. A stronger Wi-Fi signal means you can install more wireless surveillance cameras, baby monitors, sensors, and alarms in the places where you need them. The DIR-2680's Smart Connect Technology makes connecting to wireless networks easy by eliminating the confusion of multiple networks. Ever since the introduction of 5 GHz multi-band wireless technology, users have had to guess whether the 5 GHz or 2.4 GHz band network would provide them with better range and speed. Smart Connect simplifies this by only presenting a single wireless network for you to connect to. Behind the scenes, when a connection is initiated, the DIR-2680's advanced algorithms determine the best band for your device to connect to, automatically distributing devices to the optimal band, thereby ensuring a faster, more reliable, and hassle-free experience for all of your users and devices. This router is equipped with D-Link's Quick VPN technology. Using Quick VPN allows you to securely connect your computer or mobile device to places with free, untrusted Wi-Fi hotspots by encrypting and relaying your connection through your home Internet connection. This extra 'hop' reduces the chances of hackers stealing your information, such as logins, passwords, and credit card numbers. When traveling, Quick VPN lets you watch sports and use video streaming services without experiencing blackouts or filtering. You can surf the whole Internet unfiltered and unblocked, just as you would at home. D-Link DIR-2680 User Manual 3 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY Introduction (continued) The DIR-2680 supports the latest wireless security features to help prevent unauthorized access, be it from over a wireless network or the Internet. Support for WPA and WPA2 standards ensure that you will be able to use the best possible encryption regardless of your client devices. In addition, this router is equipped with a dual-active firewall (SPI and NAT) to help prevent potential attacks over the Internet. The DIR-2680 D-Fend AC2600 Wi-Fi Router provides incredible speeds, smart antenna technology, fast ports, cloud features, and advanced security features. It also features an innovative design and easy installation options. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. D-Link DIR-2680 User Manual 4 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY Features Superior Wireless Networking - The DIR-2680 provides Gigabit wireless speeds of up to a combined 2600 Mbps (1732 Mbps 802.11ac 5 GHz, plus 800 Mbps 802.11n 2.4 GHz)1. This capability rivals wired connections, allowing users to participate in real-time activities online, such as HD video communication, online gaming, and use mobile devices from anywhere in your home while still offering full 802.11n/g/b backward compatibility. Extreme Wired LAN and WAN Networking - With four 10/100/1000 Gigabit Ethernet LAN ports, and a 10/100/1000 Gigabit Ethernet WAN port, the DIR-2680 has an enormous amount of bandwidth to take full advantage of the highest speed broadband connections available. IPv6 Support - The DIR-2680 fully supports IPv6 and includes support for a variety of IPv6 connection types including: SLAAC/DHCPv6, 6to4, 6rd, Static IPv6, IPv6 PPPoE, IPv6 in IPv4 tunneling, and local connectivity. Smart Connect - Creates a 'single' wireless network for your devices to connect to. Behind the scenes, the DIR-2680 automatically determines whether to connect a device to the 2.4 or 5 GHz band, thereby providing the best speed and range for each device and optimally distributing devices to each network. Advanced Firewall Features - The web-based user interface displays a number of advanced network management features. Easily apply content filtering based on MAC address, URL, and/or domain name. Schedule these filters to be active on certain days or for a duration of hours or minutes. Encrypted Multiple/Concurrent Sessions - The DIR-2680 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-2680 can access corporate networks through encrypted channels. User-friendly Setup Wizard - Through its easy-to-use web-based user interface or QRS Mobile (Quick Router Setup) App, the DIR-2680 lets you quickly configure and secure your router to your specific settings in minutes. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-2680 User Manual 5 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY Hardware Overview LED Indicators 1 2 3 4 5 6 1 2 Power LED Internet LED A solid light indicates a proper connection to the power supply. The light will be solid orange during boot up. A solid light indicates a connection on the Internet port. If the LED is orange, the router cannot connect to the Internet. 3 Wireless (2.4 GHz LED) A solid light indicates that the 2.4 GHz wireless band is enabled. 4 Wireless (5 GHz LED) 5 6 Super Speed USB LED A solid green light indicates a USB storage device is connected to the USB 3.0 port on the front of the router. A solid green light indicates a USB storage device is connected to the USB 2.0 port on the back of the router. A solid light indicates that the 5 GHz wireless band is enabled. USB LED D-Link DIR-2680 User Manual 6 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY Hardware Overview Back Panel 1 2 3 4 5 6 7 8 USB 2.0 Port Connect a USB storage device to share files over the network. Gigabit LAN Ports (1- 4) Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles. Gigabit WAN Port Using an Ethernet cable, connect your broadband modem to this port. Reset Button WPS Button Wi-Fi Button Power Connector Power Button Insert a paperclip in the hole, wait for 10 seconds, and release to reset the router to default settings. Press to start the WPS process and automatically create an encrypted connection to a WPS client. Press this button turn off or turn on the wireless networks. Connector for the supplied power adapter. Press the power button to power the device on or off. D-Link DIR-2680 User Manual 7 Section 1 - Product OverviewDRAFT FOR CERTIFICATION USE ONLY Installation This section will walk you through the installation of the DIR-2680. Before you Begin Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage. Configure the router with the computer that was last connected directly to your Internet connection. Verify that it is connected to the Internet before connecting additional devices. If your ISP provided you with a modem/router combo, you will need to set it to bridge mode so the router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your Internet Service Provider (ISP) to change connection types (USB to Ethernet). If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy. This information is likely to include your DSL account's Username and Password. Your ISP may also supply you with additional WAN configuration settings which might be necessary to establish a connection. If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take a picture of your existing setup before making any changes. If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-2680 User Manual 8 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use. D-Link DIR-2680 User Manual 9 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Hardware Setup 1. The DIR-2680 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas into a 105 degree angle to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage. 2. Position your DIR-2680 near your Internet-connected modem. Place it in an open area for better wireless coverage. DIR-2680 Modem 3. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it off for up to five minutes. DIR-2680 Modem D-Link DIR-2680 User Manual 10 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY 4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router. DIR-2680 Modem 5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward. DIR-2680 Modem 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid white. DIR-2680 Modem Note: This unit is to be used with power supply model S36B52-120A250-04. D-Link DIR-2680 User Manual 11 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY 7. If you are configuring the DIR-2680 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label attached to the bottom your router. DIR-2680 Modem Wi-Fi Configuration Note If you are configuring the DIR-2680 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer. DIR-2680 Modem 8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Completing Setup on page 13. D-Link DIR-2680 User Manual 12 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY There are several different ways you can configure your router to connect to the Internet and connect to your clients:
Completing Setup QRS Mobile App - Use your Android device, iPhone, iPad, or iPod touch to configure your router. Refer to QRS Mobile App on page 14. D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to Setup Wizard on page 19. Manual Setup - Log in to the router and manually configure your router. Refer to Configuration on page 23. D-Link DIR-2680 User Manual 13 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY QRS Mobile App The QRS Mobile app allows you to install and configure your router from your mobile device. Note: The screenshots may be different depending on your mobile devices OS version. Step 1 Search for the free QRS Mobile App on the App Store or Google Play. Step 2 Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step 3 Once you connect to the router, launch the QRS Mobile app from the Home screen of your device. Note: The following steps show the Android interface of the QRS Mobile app. If you are using an iPhone, iPad, or iPod touch, the appearance may be different to that of the screenshots, but the process is the same. QRS Mobile D-Link DIR-2680 User Manual 14 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY QRS Mobile App (continued) Step 4 You will see the welcome screen. Tap Start to proceed, then enter your device password and tap Log In. Tap Next once the Operation Mode screen appears. Step 5 At this point, please ensure that your router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-2680. Tap Next to automatically detect your Internet connection and proceed to the next step. D-Link DIR-2680 User Manual 15 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY QRS Mobile App (continued) Step 6 You will be asked to configure your 2.4 GHz wireless network. Enter a network name (SSID) of your choice, or leave it unchanged to accept the default SSID. Next, choose a Wi-Fi password of at least 8 characters. Any device trying to connect to the router wirelessly will need to enter this password the first time it connects. Tap Next to configure your 5 GHz wireless network. When satisfied, tap Next to proceed. Step 7 Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. See Configuration on page 23 for details of when this password is used. Tap Next to proceed. D-Link DIR-2680 User Manual 16 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY QRS Mobile App (continued) Step 8 If you wish to receive push notifications whenever a new firmware update is available, check the Notify me when new firmware is available box and tap Next. Otherwise, just tap Next to proceed. Step 9 You will be presented with a summary of your chosen settings. Tap Save to complete the setup. D-Link DIR-2680 User Manual 17 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY QRS Mobile App (continued) Congratulations, your device has been successfully configured! You can share this information by tapping Share By E-mail, or tap Finish to exit the app. D-Link DIR-2680 User Manual 18 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Setup Wizard If this is your first time installing the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.0.1). The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. If the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed. Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue. D-Link DIR-2680 User Manual 19 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Setup Wizard (continued) If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-2680 User Manual 20 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Setup Wizard (continued) Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. Note: The DIR-2680's Smart Connect feature presents a single wireless network. When connecting clients to an extension network, they will be automatically added to the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and individually configure 2.4 GHz and 5 GHz networks, refer to Wireless on page 60. In order to secure the router, please enter a new password. You will be prompted for this password every time you want to use the routers web configuration utility. Click Next to continue. D-Link DIR-2680 User Manual 21 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Setup Wizard (continued) You will be presented with a summary of your settings. Click Next to finalize the settings or Back to make changes. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. Congratulations, your device has been successfully configured!
D-Link DIR-2680 User Manual 22 Section 3 - InstallationDRAFT FOR CERTIFICATION USE ONLY Configuration To access the configuration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local./ or you may also connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar. Enter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed. Note: If you cannot remember your password and cannot log in, press the reset/
wps button on the back of the device for longer than 10 seconds to restore the router to its default settings. The routers home page will open displaying its current connection status. The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-2680 User Manual 23 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Home The Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard, refer to Setup Wizard on page 19 for more information. Internet To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. Click Release IP Address to disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to Internet on page 28. D-Link DIR-2680 User Manual 24 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY DIR-2680 Click on the DIR-2680 icon to view details about the router and its wireless settings. Here you can see the routers current Wi-Fi network name and password, as well as the router's MAC address, IPv4 address, and IPv6 address. To reconfigure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears. Refer to Network on page 64 for more information. To reconfigure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. Refer to Wireless on page 60 for more information. D-Link DIR-2680 User Manual 25 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Connected Clients Click on the Connected Clients icon to view details about the router and its wireless settings. On this page you can see all the clients currently connected to the router, and their IP addresses. To edit each clients settings, click the pencil icon on the client you want to edit. Name: Enter a custom name for this client. Vendor: Displays the vendor of the device. MAC Address: Displays the MAC address of the device. IP Address: Displays the current IP address of this client. Reserve IP: Enable to reserve this IP address for this client. IP Address
(Reserved):
Specify an IP address for the DIR-2680's DHCP server to assign. Parental Control: Allow or Block access to the router. Click Save when you are done. D-Link DIR-2680 User Manual 26 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY USB Device Click on the USB Device icon to view details about the currently connected USB storage device, DLNA media server, Windows File Sharing, and FTP. If you have a USB device connected, you can see its name and how much free space it has. To reconfigure the USB sharing settings, either click Go to settings on the lower right, or click Settings (at the top of the page) and then USB Sharing on the menu that appears. Refer to USB Sharing on page 67 for more information. D-Link DIR-2680 User Manual 27 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Settings Wizard In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to Setup Wizard on page 19 for details. In the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options. Internet My Internet Connection Is:
Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Dynamic IP (DHCP) refer to page 29. For Static IP refer to page 30. For PPPoE refer to page 31. For PPTP refer to page 33. For L2TP refer to page 35. For DS-Lite refer to page 37. To configure an IPv6 connection, click the IPv6 link. Refer to page 38. D-Link DIR-2680 User Manual 28 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Dynamic IP (DHCP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use. Advanced Settings Host Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-2680 User Manual 29 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Gateway: Enter the default gateway address provided by your ISP. Primary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Advanced Settings Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-2680 User Manual 30 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On Demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Service Name: Enter the ISP service name (optional). Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 31 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPPoE (continued) MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Static IP IP Address: Enter the IP address provided by your ISP. Service Name: Enter the ISP service name (optional). Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-2680 User Manual 32 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server IP Address:
Enter the PPTP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 33 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPTP (continued) Static IP PPTP IP Address: Enter the IP address provided by your ISP. PPTP Subnet Mask:
PPTP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
Enter the subnet mask provided by your ISP. Enter the gateway IP address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-2680 User Manual 34 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider
(ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server: Enter the L2TP server IP address provided by your ISP. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 35 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY L2TP (continued) Static IP L2TP IP Address: Enter the IP address provided by your ISP. L2TP Subnet Mask:
L2TP Gateway IP Address:
Primary DNS Server:
Secondary DNS Server:
Enter the subnet mask provided by your ISP. Enter the gateway IP address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-2680 User Manual 36 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY DS-Lite DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
Advanced Settings DS-Lite Configuration:
Select DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. DS-Lite DHCPv6 B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address:
Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:
Once connected, the IPv6 WAN default gateway address will be displayed here. Manual AFTR IPv6 Address:
Enter the AFTR IPv6 address used here. B4 IPv6 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address:
Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway:
Once connected, the IPv6 WAN default gateway address will be displayed here. Click Save when you are done. D-Link DIR-2680 User Manual 37 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Connection Is:
Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Auto Detection refer to page 39. For Static IPv6 refer to page 41. For Auto Configuration (SLAAC/DHCPv6) refer to page 43. For PPPoE refer to page 46. For IPv6 in IPv4 Tunnel refer to page 50. For 6 to 4 refer to page 53. For 6rd refer to page 55. For Local Connectivity Only refer to page 57. D-Link DIR-2680 User Manual 38 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Auto Detection Select Auto Detection to automatically detect the IPv6 connection method used by your Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6 connection type. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:
If you selected Use the following DNS address above, enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable DHCP Prefix Delegation. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-2680 User Manual 39 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Auto Detection (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable the Automatic IPv6 Address Assignment feature. Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Click Save when you are done. D-Link DIR-2680 User Manual 40 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP). Static IPv6 Use Link-Local Address:
Enable or disable link-local address use. Default Gateway: Enter the default gateway for your IPv6 connection. Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. If Use Link-Local Address is disabled these additional parameters are available for configuration:
IPv6 Address: Enter the address supplied by your ISP. Subnet Prefix Length:
Enter the subnet prefix length supplied by your ISP. LAN IPv6 Address Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-2680 User Manual 41 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Static IPv6 (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. Autoconfiguration Type:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Advertisement Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-2680 User Manual 42 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration if your ISP assigns your IPv6 address when your router requests one from the ISPs server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-2680 User Manual 43 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Auto Configuration (SLAAC/DHCPv6) (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. D-Link DIR-2680 User Manual 44 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Auto Configuration (SLAAC/DHCPv6) (continued) If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Advertisement Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-2680 User Manual 45 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session. Address Mode Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. If you selected Static IP as the Address Mode and Share with IPv4 as the PPPoE Session:
IP Address: Enter the IP address provided by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. If you selected Create a new session as the PPPoE Session:
Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Address Mode: Select either Dynamic IP or Static IP. Service Name: Enter the ISP service name (optional). Reconnect Mode Select either Always On or Manual. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link DIR-2680 User Manual 46 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPPoE (continued) If you selected Static IP as the Address Mode and Create a new session as the PPPoE Session:
IP Address Enter the IP address provided by your ISP Service Name Enter the ISP service name (optional). Reconnect Mode Select either Always-on or Manual. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-2680 User Manual 47 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPPoE (continued) If Enable DHCP-PD is disabled these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). D-Link DIR-2680 User Manual 48 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY PPPoE (continued) If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. If DHCP-PD is disabled in LAN IPv6 Address Settings:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Advertisement Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-2680 User Manual 49 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv6 in IPv4 Tunnel The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure. Enter the IPv4 remote address you will use. Enter the IPv6 remote address you will use. Displays the current local IPv4 address. Enter the IPv6 local address you will use. Enter the subnet prefix length supplied by your ISP. Remote IPv4 Address:
Remote IPv6 Address:
Local IPv4 Address:
Local IPv6 Address:
Subnet Prefix Length:
IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected:
Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. D-Link DIR-2680 User Manual 50 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv6 in IPv4 Tunnel (continued) LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature. If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic DHCP-PD in LAN:
Autoconfiguration Type:
Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. D-Link DIR-2680 User Manual 51 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv6 in IPv4 Tunnel (continued) If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Advertisement Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-2680 User Manual 52 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY 6to4 In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet. 6to4 Address: Displays the 6 to 4 address. 6to4 Relay: Enter the 6 to 4 relay supplied by your ISP. Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-2680 User Manual 53 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY 6to4 (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type:
Enable or disable the Automatic IPv6 Address Assignment feature. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Advertisement Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-2680 User Manual 54 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY In this section the user can configure the IPv6 6rd connection settings. 6rd Assign IPv6 Prefix: Currently unsupported. Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server address. Enter the secondary DNS server address. 6rd Manual Configuration Enable Hub and Spoke Mode:
Enable this option if you want to minimize the number of routes to the destination by using a hub and spoke method of networking. 6rd Configuration: Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Configuration to enter the settings yourself. If you selected Manual configuration 6rd IPv6 Prefix: Enter the 6rd IPv6 prefix and mask length supplied by your ISP. WAN IPv4 Address Displays the routers IPv4 address. 6rd Border Relay IPv4 Address:
Enter the 6rd border relay IPv4 address settings supplied by your ISP. LAN IPv6 Address Settings LAN IPv6 Address: Displays the routers LAN IPv6 Address link-local address. LAN IPv6 Link-
Local Address:
Displays the routers LAN link-local address. D-Link DIR-2680 User Manual 55 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY 6rd (continued) Advanced Settings - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type:
Enable or disable the Automatic IPv6 Address Assignment feature. Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Advertisement Lifetime:
Enter the router advertisement lifetime (in minutes). If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Advertisement Lifetime:
Enter the starting IPv6 address for the DHCP servers IPv6 assignment. Enter the ending IPv6 address for the DHCP servers IPv6 assignment. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-2680 User Manual 56 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet. Local Connectivity Only Advanced Settings IPv6 ULA Settings Enable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings. Use Default ULA Prefix:
Enable this option to use the default ULA prefix. If you selected Enable ULA and disabled Default ULA Prefix:
ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Prefix:
Displays the current ULA prefix. LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link DIR-2680 User Manual 57 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY VLAN VLAN allows for services such as Triple-Play to be used, and divides a network into segments that can only be accessed by other devices in the same VLAN. In the Settings menu on the bar on the top of the page, click Internet, then click the VLAN link. Triple-Play Status: Click to enable or disable the Triple-Play VLAN feature. Priority ID: Enable or disable traffic priority ID for the Internet, IPTV, and VoIP VLANs. If Status is enabled:
Internet VLAN ID Enter the VLAN ID for your Internet connection, as provided by your ISP. IPTV VLAN ID Enter the VLAN ID for your IPTV service, as provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your VoIP network, as provided by your ISP. If Priority ID is enabled:
Priority ID: Select a priority ID from the drop-down menu to assign to the corresponding VLAN. Higher priority ID traffic takes precedence over traffic with a low priority ID tag. D-Link DIR-2680 User Manual 58 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY VLAN (continued) Interface Traffic Type Setting LAN 1-4, Wireless, Guest Zone:
From the drop-down menu, you can select the type of connection
(Internet, IPTV, or Voice over IP) coming from the WAN connection to each interface on the DIR-2680. Click Save when you are done. D-Link DIR-2680 User Manual 59 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Wireless From this page you can configure your wireless network settings. Smart Connect Smart Connect: Enable or disable the Smart Connect Feature. When enabled, only a few configuration options are available to simplify configuration. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network. Advanced Settings Security Mode: Choose None or WPA/WPA2-Personal (recommended). Transmission Power:
Select the desired wireless transmission power. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Wi-Fi Protected Setup The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) fuctionality. WPS-PIN Status: Enable or disable WPS-PIN fuctionality. Refer to the next page if you wish to disable Smart Connect or click Save when you are done. D-Link DIR-2680 User Manual 60 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Wireless - Smart Connect Disabled If Smart Connect is disabled the following options are available:
2.4GHz / 5GHz Status: Enable or disable the 2.4 GHz / 5 GHz wireless network. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Advanced Settings Security Mode: Choose None or WPA/WPA2-Personal (recommended). 802.11 Mode
(2.4 GHz):
Select the desired wireless networking standards to use. The available options for the 2.4 GHz wireless network are Mixed 802.11b/g/n, Mixed 802.11g/n, 802.11n only. 802.11 Mode
(5 GHz):
Select the desired wireless networking standards to use. The available options for the 5 GHz wireless network are Mixed 802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n, Mixed 802.11n only, or 802.11a only. Wi-Fi Channel: Select the desired channel. The default is Auto (recommended). Transmission Power:
Select the desired wireless transmission power. Channel Width
(2.4 GHz):
Select Auto 20/40 if you are using both 802.11n and non-802.11n devices, or select 20 MHz if you are not using any 802.11n devices. Channel Width
(5 GHz):
Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a devices, select Auto 20/40 if you are using 802.11n and 802.11a devices, or select 20 MHz if you are only using 802.11a devices. D-Link DIR-2680 User Manual 61 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Enable or disable HT20/40 Coexistence. HT20/40 Coexistence:
(2.4 GHz):
Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Wi-Fi Protected Setup The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) fuctionality. WPS-PIN Status: Enable or disable WPS-PIN fuctionality. Click Save when you are done. D-Link DIR-2680 User Manual 62 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Guest Zone The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. Note: If Smart Connect is enabled, Guest Zone is unavailable. In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. 2.4 GHz / 5 GHz Status: Enable or disable the 2.4 GHz / 5 GHz wireless network. Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Home Network Access Internet Access Only:
Enabling this option will confine connectivity to the Internet, preventing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-2680 User Manual 63 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Network This section will allow you to change the local network settings of the router and to configure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network Settings LAN IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Management Link:
The default address to access the routers configuration is http://dlinkrouter.local/ Here, you can replace dlinkrouter with a name of your choice. Local Domain Name:
Enter the domain name (optional). Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server. D-Link DIR-2680 User Manual 64 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Network (continued) DHCP Server Status: Enable or disable the DHCP server. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time: Enter the length of time for the IP address lease in minutes. Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/
WLAN clients. Advanced Settings WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals. IPv4 Multicast Stream:
Enable to allow IPv4 multicast traffic to pass through the router from the Internet. IPv6 Multicast Stream:
Enable to allow IPv6 multicast traffic to pass through the router from the Internet. Click Save when you are done. D-Link DIR-2680 User Manual 65 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY USB Sharing This page will allow you to set up access to files on an external USB drive plugged into the router. You can access shared files through the local network or from the Internet using a web browser or an app on your mobile device. In the Settings menu on the bar on the top of the page, click USB Sharing. DLNA Media Server Status Enable or disable the DLNA media server function, allowing connected clients access to media files over the network. DLNA Media Server Choose a name for your DLNA media server so that it can be found. Windows File Sharing (SAMBA) Status Enable or disable the Windows file sharing function, allowing connected clients access to shared files over the network. FTP Server Status Enable or disable the FTP server function, allowing connected clients access to media files through FTP. FTP Server - Advanced Settings Enable Remote Sharing If FTP server is enabled, enable or disable remote access to files stored on a USB device plugged into the router through a web browser. FTP Server Port Enter the port number of FTP server. Idle Time Enter the time (in minutes) before connected clients will be considered idle. Click Save when you are done. D-Link DIR-2680 User Manual 66 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Features QoS Engine This Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-
urgent file, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the traffic of the other devices on the network. In the Features menu on the bar on the top of the page, click QoS Engine. Under Connected Clients, you will see device cards representing each connected client. If some are off-screen, you can use the < and > buttons to scroll through the cards. A maximum of one device can be assigned Highest priority. A maximum of two devices can be assigned High priority. A maximum of eight devices can be assigned Medium priority. If no devices are explicitly assigned a priority, they will all be treated with equal priority. If some devices are not assigned a priority and others are, the unassigned devices will be treated with the lowest priority. To assign a priority level to a device, drag the device card from the All Devices list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-2680 User Manual 67 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Firewall The routers firewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall. Click Advanced Settings... to expand the list and see all of the options. Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations. DMZ IP Address:
If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it. Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the traffic passing through the session conforms to the protocol. Enable Anti-Spoof Checking:
Enable this feature to help protect your network from certain kinds of spoofing attacks. IPv6 Simple Security:
IPv6 Ingress Filtering:
Enable or disable IPv6 simple security. Enable or disable IPv6 ingress filtering. D-Link DIR-2680 User Manual 68 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Firewall Settings (continued) Advanced Settings - Application Level Gateway (ALG) Configuration PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. RTSP: Allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet. SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-2680 User Manual 69 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv4/IPv6 Rules The IPv4/IPv6 Rules section is an advanced option that lets you configure what kind of traffic is allowed to pass through the network. To configure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To configure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Advanced. To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn filtering OFF. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Source IP Address Range:
Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Destination IP Address Range:
Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Protocol & Port Range:
Select the protocol of the traffic to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Refer to Schedule on page 81 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 70 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Port Forwarding Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. TCP Port: Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000). UDP Port: Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000). Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 71 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Virtual Server The virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP address and Private LAN port. To configure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Alternatively, select the protocol/Application from the drop-down menu. Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. Protocol: Select the protocol of the traffic to allow or deny (TCP, UDP, Both, or Other). Protocol Number:
If you entered Other above, enter the protocol number. External Port: Enter the public port you want to open. Internal Port: Enter the private port you want to open. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 72 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Website Filter The website filter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). In the Features menu on the bar on the top of the page, click Website Filter. If you want to create a list of sites to block, select DENY client access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW clients access to ONLY these sites from the drop-down menu. All other sites will be blocked. You may specify a maximum of twenty four web sites. To add a new site to the list, click Add Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DIR-2680 User Manual 73 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Static Routes The Static Routes section allows you to define custom routes to control how data traffic is moved around your network. In the Features menu on the bar on the top of the page, click Static Route. To configure IPv6 rules, click IPv6 and refer to IPv6 on page 75. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Route button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Destination Network:
Enter the IP address of packets that will take this route. Mask: Enter the subnet mask of the route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-2680 User Manual 74 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv6 To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the packets that will take this route. Gateway: Enter your next hop gateway to be taken if this route is used. Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-2680 User Manual 75 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Dynamic DNS Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is. In the Features menu on the bar on the top of the page, click Dynamic DNS. Enable Dynamic DNS:
Enable or disable dynamic DNS. Enabling this feature will reveal further configuration options. Status: Displays the current dynamic DNS connection status. Server Address: Enter the address of your dynamic DNS server, or select one from the drop-down menu. Host Name: Enter the host name that you registered with your dynamic DNS service provider. User Name: Enter your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter a time out time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to IPv6 Host on page 77. D-Link DIR-2680 User Manual 76 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY IPv6 Host The IPv6 host settings are found at the bottom of the Dynamic DNS page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Record button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Save when you are done. D-Link DIR-2680 User Manual 77 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Quick VPN This page will help you configure the Quick VPN feature of your router. For more information refer to Quick VPN on page 88. Before proceeding, ensure that your Internet connection is working properly. We recommend configuring Dynamic DNS before proceeding with Quick VPN setup. If your router is assigned an IP address from your ISP using DHCP, it may frequently change, requiring clients credentials to be set up again and a simple DDNS address will be easier than an IP address. In the Features menu on the bar on the top of the page, click Quick VPN. Click User to create, manage, and delete user accounts with user-defined access to certain router services. Refer to User on page 87. Configure the following options:
L2TP over IPsec: Enable or disable the Quick VPN server. If Quick VPN is enabled, the following options are available:
Username: Enter a username between 1 and 20 characters. Password Enter a username between 1 and 20 characters. PSK Enter a passkey between 6 and 64 characters. D-Link DIR-2680 User Manual 78 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Quick VPN (continued) Advanced Settings - Address Autoconfiguration Settings Authentication Protocol:
Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP. MSCHAPv2 is the default. MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128. RC4-128 is the default. Click Save when you are done. D-Link DIR-2680 User Manual 79 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Management Time & Schedule Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time. In the Management menu on the bar on the top of the page, click Time &
Schedule. Time Configuration Time Zone: Select your time zone from the drop-down menu. Time: Displays the current date and time of the router. Enable Daylight Saving:
Enable or disable daylight saving time. Automatic Time Configuration Update Time Using an NTP Server:
Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your router. If you enable this option, select an NTP server from the drop-down menu. To configure the router's time and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to Schedule on page 81. D-Link DIR-2680 User Manual 80 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Schedule Some router functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following screen will appear:
First, enter the name of your schedule in the Name field. Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the starting hour and drag to the ending hour. You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Save when you are done. D-Link DIR-2680 User Manual 81 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY System Log The router keeps a running log of events. This log can be sent to a Syslog server, or sent to your email address. In the Management menu on the bar on the top of the page, click System Log. Log Settings System Log Click the Check System Log button to download a text file containing the system log. SysLog Settings Enable Logging to Syslog Server:
Check this box to send the router logs to a SysLog Server. If Logging to the Syslog Server is Enabled:
Syslog Server IP Address:
Enter the IP address for the Syslog server. If the Syslog server is connected to the extender, select it from the drop-down menu to automatically populate the field. Email Settings Enable E-mail Notification:
Enable this option if you want the logs to be automatically sent to an email address. If E-mail notification is Enabled:
From E-mail Address:
Enter the email address your SysLog messages will be sent from. To E-mail Address: Enter the email address your SysLog messages will be sent to. SMTP Server Address:
Enter your SMTP server address. D-Link DIR-2680 User Manual 82 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY System Log (continued) SMTP Server Port: Enter your SMTP server port. Enable Authentication:
Check this box if your SMTP server requires authentication. Account Name: Enter your SMTP account name. Password: Enter your SMTP account's password E-mail Log When Full or On Schedule Send When Log Full:
Send on Schedule:
If enabled, this option will set the router to send the log when it is full. If enabled, this option will set the router to send according to a set schedule. Schedule:
If you enable Send On Schedule, use the drop-down menu to select a schedule to apply. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 83 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY System Admin This page will allow you to change the administrator (Admin) password and enable remote management. In the Management menu on the bar on the top of the page, click System Admin. To load, save, reset settings, or reboot the router, click System and refer to Schedule on page 81. Admin Password Password: Enter a new password for the administrator account. You will need to enter this password whenever you configure the router using a web browser. Enable Graphical Authentication
(CAPTCHA):
Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Advanced Settings - Administration Enable HTTPS Server:
Check to enable HTTPS to connect to the router securely. Instead of using http://dlinkrouter.local./, you must use https://dlinkrouter.local./ in order to connect to the router. Enable Remote Management:
Remote management allows the DIR-2680 to be configured from the Internet by a web browser. A password is still required to access the web management interface. Remote Admin Port:
The port number used to access the DIR-2680 is used in the URL. Example:
http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-2680 and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access the router remotely and securely, you must enter https:// at the beginning of the address. Click Save when you are done. D-Link DIR-2680 User Manual 84 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY System This page allows you to save the routers current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the router. From the Admin page, click System. To return to the Admin page, click Admin. System Save Settings To Local Hard Drive:
This option will save the current router configuration settings to a file on your computer. Load Settings From Local Hard Drive:
Restore To Factory Default Settings:
This option will load a previously saved router configuration file. This will overwrite the routers current configuration. This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save Settings To Local Hard Drive button above. Auto Reboot Configuration Reboot The Device:
Click to reboot the router immediately. Auto Reboot: You may set the DIR-2680 to automatically reboot at a set time. The options are Never, Daily, Weekly. You may set the hour using a 24 hour format, the minute, and the day you wish to have the DIR-2680 automatically reboot. Click Save when you are done. D-Link DIR-2680 User Manual 85 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY The User section is used to create, manage, and delete user accounts with user-defined access to certain router services. User & Device User In the Management menu on the bar on the top of the page, click User &
Device. To configure user accounts, click on the User tab. If you wish to remove a user account, click on its trash can icon in the Delete column. If you wish to edit a user account, click on its pencil icon in the Edit column. If you wish to create a new user, click the Create User button. Click Save when you are done. If you edit or create a rule, the following options will appear:
User Name: Enter a username for the new user account. Password: Enter a password for the new user account. SAMBA Status: Enable or disable the Windows file sharing function for this user, allowing connected clients access to media files over the network. Permission:
If SAMBA is enabled, choose to assign either Read Only or Read/
Write permission. Folder: Click Browse to select the folder you want to share. D-Link DIR-2680 User Manual 86 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY User (continued) FTP VPN Status: Enable or disable FTP server access for this user. Permission:
If FTP is enabled, choose to assign either Read Only or Read/Write permission. Folder: Click Browse to select the folder you want to share. Status: Enable or disable Virtual Private Network (VPN) functionality for this user. Click Save when you are done. D-Link DIR-2680 User Manual 87 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Device On the Device page, you can manage Parental Control settings for devices added to the list, which will allow or block access to the network for those devices based on the selected schedule. To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. From the User page, click Device. To return to the User page, click User. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Apply when you are done. If you edit or create a rule, the following options will appear:
Name: Enter a name for the rule. Mac Address: Enter the MAC address of the device on your local network that you want to apply the rule to. Alternatively, select the device from the drop-down menu. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 81 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 88 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Upgrade This page will allow you to upgrade the routers firmware or language pack, either automatically or manually. To manually upgrade the firmware or language pack, you must first download the relevant file from http://support. dlink.com. In the Management menu on the bar on the top of the page, click Upgrade. Firmware Information Current Firmware Version/Date :
The current firmware's version and date will be displayed. Check for New Firmware:
Click this button to prompt the router to automatically check for a new firmware version. If a newer version is found, it will prompt you to install it. Upgrade Manually Upgrade Firmware:
If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DIR-2680 User Manual 89 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Statistics On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar on the top of the page, click Statistics. You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-2680 User Manual 90 Section 4 - ConfigurationDRAFT FOR CERTIFICATION USE ONLY Quick VPN This router is equipped with D-Link's Quick VPN technology. Virtual Private Networking (VPN) creates a connection between devices across the Internet. Using Quick VPN allows you to securely connect your computer or mobile device to places with free, untrusted Wi-Fi hotspots in places like coffee shops and hotels by encrypting and relaying it through your home Internet connection. This extra 'hop' reduces the chances of hackers stealing your information, such as logins, passwords, and credit card numbers. When traveling, Quick VPN lets you watch sports and use video streaming services without experiencing blackouts or filtering. You can surf the whole Internet unfiltered and unblocked, just as you would at home. Without Quick VPN Your Laptop Potential Hacker Stealing Data Public Unsecured Wi-Fi Hotspot Internet With Quick VPN Your Laptop Public Unsecured Wi-Fi Hotspot Internet Your Network with Quick VPN Server Unencrypted Data Encrypted Data D-Link DIR-2680 User Manual 91 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Important Information The following instructions explain and help you to configure your D-Link Quick VPN enabled router and devices to create a Virtual Private Network
(VPN). This feature is provided for advanced users who wish to connect remotely and use their router's Internet connection to add a layer of security while using untrusted networks. Configure the Quick VPN Server on your router first and then set up client devices to connect through your router's WAN connection. Quick VPN only provides an added layer of security against specific types of snooping attacks and does not guarantee complete data integrity or protection. Only traffic in the tunnel between your router and device will be encrypted, WAN traffic will leave your D-Link Quick VPN enabled router unencrypted. Keep your Quick VPN Username, Password, and Passkey safe. Keep your Quick VPN Username, Password, and Passkey safe. It is recommended that you change these credentials periodically. A device connected via Quick VPN tunnel may experience lower data throughput and higher latency due to a number of factors including: Internet conditions, local and remote network Wi-Fi and WAN bandwidth limitations, and increased latency. This may negatively impact real time voice and video communication. Quick VPN supports up to five concurrent VPN client sessions using the same login and password are supported. Quick VPN uses L2TP/IPsec with MSCHAPv2, PAP, or CHAP authentication. You device may warn you that your information may be intercepted, since you control the Quick VPN server, you may ignore this. UDP Ports 500, 4500, 1701 and IP Port 50 must be open in order for Quick VPN to work. L2TP/IPsec VPN usage may be restricted in some countries and on some networks. If you have trouble using Quick VPN on some networks, but not others and are not violating network access rules, try contacting your ISP or network administrator. Devices connected via Quick VPN are assigned addresses on a separate subnet (ex. 192.168.1.x). Some network resources may be unavailable when connecting via Quick VPN. If your Internet connection uses DHCP, it is strongly recommended that you first set up Dynamic DNS (DDNS), such as D-Link DDNS, to eliminate the need to reconfigure client devices in the event your ISP assigns you a new WAN IP address. D-Link DIR-2680 User Manual 92 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Quick VPN Server Setup Instructions Configure the following options:
L2TP over IPSec: Enable or disable the Quick VPN server. If you enable Quick VPN, the following options are available:
Username: . Enter a username between 1 and 20 characters Password: Enter a password between 1 and 20 characters. PSK: Enter a passkey between 6 and 64 characters. Authentication Protocol:
Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP. MSCHAPv2 is the default. MPPE: Select the encryption cipher strength: none, RC4-40, or RC4-128. RC4-128 is the default. Click Save when you are done. Click Save and proceed to client setup pages. D-Link DIR-2680 User Manual 93 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY iOS Devices VPN Setup Instructions This section provides Quick VPN setup instructions for iOS devices using the Export Profile function. Refer to Quick VPN Server Setup Instructions on page 93 for more information. Open the e-mail containing your Quick VPN profile. Open the attachment. D-Link DIR-2680 User Manual 94 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) The Install Profile dialog will appear, tap Install in the upper right hand corner of your screen. Enter your device's passcode when prompted. D-Link DIR-2680 User Manual 95 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Acknowledge the disclaimer by tapping Install in the upper right hand corner. Tap the red Install button. Enter the Shared Secret (PSK) from the Quick VPN configuration page. Tap Done. Your iOS device is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 96 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY To connect or disconnect from to your Quick VPN server, open Settings and tap the button next to VPN. Connect or Disconnect The VPN icon will appear in the notification area at the top of your screen indicating that your device is currently connected to the Quick VPN server. D-Link DIR-2680 User Manual 97 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Mac OS X VPN Setup Instructions This section provides Quick VPN setup instructions for OS X using the Export Profile function. Refer to Quick VPN Server Setup Instructions on page 93 for more information. Open the exported profile. The Install Profile dialog will appear; click Continue and Install. Enter your user account password when prompted. Close the Profiles dialog. Go to > System Preferences... > Network and select the Quick VPN connection and click Authentication Settings. D-Link DIR-2680 User Manual 98 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Enter your Passkey in the Shared Secret text box and click OK, Apply, then OK. Your Mac is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 99 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Connect or Disconnect To connect to or disconnect from your Quick VPN server, go to > System Preferences... > Network. Select the Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-2680 User Manual 100 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Windows 7 VPN Setup Instructions Click the Start button and type vpn into the Search programs and files box. Select Set up a virtual private network (VPN) connection. Enter the IP/DDNS address of your Quick VPN server in the Internet address box, create a name for your connection in the Destination Name, check Don't Connect now; just set it up so I can connect later, and click Next. D-Link DIR-2680 User Manual 101 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Enter your Username. If you would like windows to save your password, enter your Password and check Remember this password. Click Create to continue. Do not click Connect Now. Click Close. Click the Start button and type view network connections into the Search programs and files text box. Select View network connections. D-Link DIR-2680 User Manual 102 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Click Advanced settings. Enter your Passkey in the Key text box under Use preshared key for authentication. Click OK to close Advanced Properties and click OK to close Quick VPN Connection Properties. Your Windows 7 system is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 103 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar and from the Dial Up and VPN section click on your Quick VPN connection and click on the Connect or Disconnect button. Connect or Disconnect D-Link DIR-2680 User Manual 104 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Windows 8.1/8 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 8.1/8 Click the Start button and type vpn. Select Manage virtual private networks. From the Network Settings page, click Add a VPN Connection. D-Link DIR-2680 User Manual 105 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Add a VPN Connection 1 Select Microsoft from VPN Provider. 2 Create a name for your VPN connection. 3 Enter your IP/DDNS address of your Quick VPN server. 4 Select User name and password from Type of sign-in info. 5 If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info 6 Choose Save. D-Link DIR-2680 User Manual 106 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Right-click on the Quick VPN Connection you just created and left-click on Properties. Select the Security tab. For the Type of VPN, select Layer2Tunneling with IPsec
(L2TP/IPSec). D-Link DIR-2680 User Manual 107 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Click the Start button and type view network connections. Select View network connections. Right-click your Quick VPN Connection and left-click Properties. Select the Security tab. For the Type of VPN, select Layer 2 Tunneling with IPsec (L2TP/IPSec). D-Link DIR-2680 User Manual 108 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY VPN Setup Instructions (Continued) Click Advanced settings. Enter your Passkey in the Key text box under Use preshared key for authentication. Click OK to close Advanced Properties and click OK to close Quick VPN Properties. Your Windows 8.1/8 system is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 109 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar. Click on your Quick VPN connection and click on the Connect or Disconnect button. Connect or Disconnect D-Link DIR-2680 User Manual 110 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Windows 10 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 10. Click Start > Settings > Network & Internet > NetworkandSharingCenter >
VPN > Add a VPN Connection. D-Link DIR-2680 User Manual 111 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Add a VPN Connection 1 Select Windows (built-in) from the VPN Provider drop down menu. 2 Create a name for your VPN connection. 3 Enter your IP/DDNS address of your Quick VPN server. 4 Select L2TP/IPSec with pre-shared key from VPN type. 5 Enter the Passkey. 6 Select User name and password from Type of sign-in info. If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info 7 Choose Save. Your Windows 10 system is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 112 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar and click on your Quick VPN connection. The Network & Internet Settings page will open. Click on the Connect or Disconnect button. Connect or Disconnect D-Link DIR-2680 User Manual 113 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Android VPN Setup Instructions This section provides Quick VPN setup instructions for Android devices. Your device's screens may vary. Go to Settings > More from the Wireless & networks > VPN > +
D-Link DIR-2680 User Manual 114 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Edit VPN Profile 1 Enter a name for your VPN connection. 2 Select L2TP/IPSec PSK for Type. 3 Enter the IP/DDNS address of your Quick VPN server. 4 Enter your Passkey in IPSec pre-shared key field. 5 Choose Save. Your Android device is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 115 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY To connect to or disconnect from your Quick VPN server, go to Settings > More from the Wireless & networks > VPN and select the Quick VPN connection you created. Connect or Disconnect D-Link DIR-2680 User Manual 116 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Connect or Disconnect (Continued) To connect, enter your Username and Password and select CONNECT. To disconnect, select DISCONNECT. D-Link DIR-2680 User Manual 117 Section 5 - Quick VPNDRAFT FOR CERTIFICATION USE ONLY Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-2680 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-2680 for about 1 second. The LED on the front will start to blink. Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. WPS Button D-Link DIR-2680 User Manual 118 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY Windows 10 When connecting to the DIR-2680 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network SSID and password, or enter the Wi-Fi credentials set during the product configuration. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID. D-Link DIR-2680 User Manual 119 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-2680 User Manual 120 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY Windows 8 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-2680 User Manual 121 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-2680 User Manual 122 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY Windows 7 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-2680 User Manual 123 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-2680 User Manual 124 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-2680 User Manual 125 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY WPS The WPS feature of the DIR-2680 can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:
1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-2680 User Manual 126 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY 3. Double-click the DIR-2680. DIR-2680 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Routers Web UI) and click Next. D-Link DIR-2680 User Manual 127 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-2680 User Manual 128 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY 7. The following window appears while the DIR-2680 is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the DIR-2680 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-2680 User Manual 129 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-2680 User Manual 130 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. WPA/WPA2 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-2680 User Manual 131 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-2680 User Manual 132 Section 6- Connecting a Wireless ClientDRAFT FOR CERTIFICATION USE ONLY Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-2680. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 10 or higher
- Mozilla Firefox 28 or higher
- Google Chrome 28 or higher
- Apple Safari 6 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-2680 User Manual 133 Section 7 - TroubleshootingDRAFT FOR CERTIFICATION USE ONLY Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-2680 User Manual 134 Section 7 - TroubleshootingDRAFT FOR CERTIFICATION USE ONLY 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 D-Link DIR-2680 User Manual 135 Section 7 - TroubleshootingDRAFT FOR CERTIFICATION USE ONLY You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with
(1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:
Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual Configure. To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-2680 User Manual 136 Section 7 - TroubleshootingDRAFT FOR CERTIFICATION USE ONLY Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-2680 User Manual 137 Appendix A - Wireless BasicsDRAFT FOR CERTIFICATION USE ONLY What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networksl: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-2680 User Manual 138 Appendix A - Wireless BasicsDRAFT FOR CERTIFICATION USE ONLY Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space Small Office and Home Office Uses/Benefits D-Link DIR-2680 User Manual 139 Appendix A - Wireless BasicsDRAFT FOR CERTIFICATION USE ONLY Where is wireless used?
Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like:
airports, hotels, coffee shops, libraries, restaurants, and convention centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or access point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-2680 User Manual 140 Appendix A - Wireless BasicsDRAFT FOR CERTIFICATION USE ONLY Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad-hoc Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-2680 wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-2680 User Manual 141 Appendix A - Wireless BasicsDRAFT FOR CERTIFICATION USE ONLY Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-2680 User Manual 142 Appendix B - Networking BasicsDRAFT FOR CERTIFICATION USE ONLY Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows 7 -
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Network Windows XP -
Windows 2000 - From the desktop, right-click My Network Places > Properties. Connections. Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-2680 User Manual 143 Appendix B - Networking BasicsDRAFT FOR CERTIFICATION USE ONLY Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-2680 offers the following types of security:
WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-2680 User Manual 144 Appendix B - Networking BasicsDRAFT FOR CERTIFICATION USE ONLY Technical Specifications Device Interfaces Wireless Interface (2.4 GHz): IEEE 802.11n/g/b Wireless Interface (5 GHz): IEEE 802.11 ac/n/a One 10/100/1000 Mbps WAN port One USB 3.0 port Three 10/100/1000 Mbps LAN ports Antenna Types Four internal antennas Standards IEEE 802.11ac1,2,3 IEEE 802.11n IEEE 802.11g IEEE 802.11b IEEE 802.11a IEEE 802.3 IEEE 802.3u IEEE 802.3ab Power Output: 12 V DC, 3 A Input: 100 to 240 V AC, 50/60 Hz Temperature Operating: 0 to 40 C (32 to 104 F) Storage: -20 to 65 C (-4 to 149 F) Humidity Operating: 10% to 90% maximum, non-condensing Storage: 5% to 95% maximum, non-condensing Certifications FCC IC CE Wi-Fi Protected Setup (WPS) Wi-Fi Multimedia (WMM) IPv6 Security WPATM - Personal/Enterprise WPA2TM - Personal/Enterprise Wi-Fi Protected Setup (WPS) PIN/PBC Dimensions & Weight 850 g (1.87 lbs) L x W x H: 160 x 160 x 160 mm (6.3 x 6.3 x 6.3 in) 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n, and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors,including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on countrys regulation. 3 The DIR-2680 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-2680 User Manual 145 Appendix C - Technical SpecificationsDRAFT FOR CERTIFICATION USE ONLY Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DIR-2680 User Manual 146 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY RF Frequency Requirements This device is for indoor use only when using all channels in the 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz frequency range. High power radars are allocated as primary users of the 5.150 GHz to 5.250 GHz and 5.725 GHz to 5.850 GHz bands. These radar stations can cause interference with and/or damage this device. It is restricted to indoor environments only. IMPORTANT NOTICE:
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 50 cm between the radiator and your body. D-Link DIR-2680 User Manual 147 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY Innovation, Science and Economic Development Canada (ISED) Statement:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Innovation, Science and Economic Development Canada (ISED) Statement:
This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate;
(iii) pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et l'exploitation non point point, selon le cas;
Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 50 cm between the radiator and your body. Dclaration d'exposition aux radiations Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 50 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-2680 User Manual 148 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY NCC
:
:
(UNII) 5.25-5.35 MPE(MPE) 1 mW/cm2 0 mW/cm2 D-Link DIR-2680 User Manual 149 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY Frequency Band(s) Frequenzband Frquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) 5.15 5.25 GHz 5.25 5.35 GHz 5.47 5.725 GHz 2.4 2.4835 GHz 5 G 2.4 G Max. Output Power (EIRP) Max. Output Power Consommation dnergie max. Potencia mxima de Salida Potenza max. Output Max. Output Power 200 mW 200 mW 1 W 100 mW D-Link DIR-2680 User Manual 150 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY esky [Czech]
Dansk [Danish]
Deutsch [German]
Eesti [Estonian]
English Espaol [Spanish]
[Greek]
Franais [French]
Italiano [Italian]
European Community Declaration of Conformity:
Tmto D-Link Corporation prohlauje, e tento produkt, jeho psluenstv a software jsou v souladu se smrnic 2014/53/EU. Cel text ES prohlen o shod vydanho EU a o firmwaru produktu lze sthnout na strnkch k produktu www.dlink.com. D-Link Corporation erklrer herved, at dette produkt, tilbehr og software er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU-overensstemmelseserklringen og produktfirmware kan wnloades fra produktsiden hos www.dlink.com. Hiermit erklrt die D-Link Corporation, dass dieses Produkt, das Zubehr und die Software der Richtlinie 2014/53/
EU entsprechen. Der vollstndige Text der Konformittserklrung der Europischen Gemeinschaft sowie die Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur Verfgung. Kesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on koosklas direktiiviga 2014/53/EL. Euroopa Liidu vastavusdeklaratsiooni tistekst ja toote psivara on allalaadimiseks saadaval tootelehel www.dlink. com. Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive 2014/53/EU. The full text of the EU Declaration of Conformity and product firmware are available for download from the product page at www.dlink.com Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas 2014/53/UE. El texto completo de la declaracin de conformidad de la UE y el firmware del producto estn disponibles y se pueden descargar desde la pgina del producto en www.dlink.com.
, D-Link Corporation , 2014/53/. www.dlink. com. Par les prsentes, D-Link Corporation dclare que ce produit, ces accessoires et ce logiciel sont conformes aux directives 2014/53/UE.Le texte complet de la dclaration de conformit de l'UE et le icroprogramme du produit sont disponibles au tlchargement sur la page des produits www.dlink.com. Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link DIR-2680 User Manual 151 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY Latviski [Latvian]
Lietuvi [Lithuanian]
Nederlands [Dutch]
Malti [Maltese]
Magyar [Hungarian]
Polski [Polish]
Portugus [Portuguese]
Slovensko[Slovenian]
Slovensky [Slovak]
Suomi [Finnish]
Ar o uzmums D-Link Corporation apliecina, ka is produkts, piederumi un programmatra atbilst direktvai 2014/53/ES. ES atbilstbas deklarcijas pilno tekstu un produkta apartprogrammatru var lejupieldt attiecg produkta lap vietn www.dlink.com. iuo dokumentu D-Link Corporation pareikia, kad is gaminys, priedai ir programin ranga atitinka direktyv 2014/53/ES. Vis ES atitikties deklaracijos tekst ir gaminio programin aparatin rang galima atsisisti i gaminio puslapio adresu www.dlink.com. Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/
EU. De volledige tekst van de EU conformiteitsverklaring en productfirmware is beschikbaar voor download van de productpagina op www.dlink.com. Bil-preenti, D-Link Corporation tiddikjara li dan il-prodott, l-aessorji, u s-software huma konformi mad-Direttiva 2014/53/UE. Tista tniel it-test si tad-dikjarazzjoni ta konformit tal-UE u l-firmware tal-prodott mill-pana tal-
prodott fuq www.dlink.com. Ezennel a D-Link Corporation kijelenti, hogy a jelen termk, annak tartozkai s szoftvere megfelelnek a 2014/53/
EU sz. rendeletek rendelkezseinek. Az EU Megfelelsgi nyilatkozat teljes szvege s a termk firmware a termk oldalrl tlthet le a www.dlink.com cmen. D-Link Corporation niniejszym owiadcza, e ten produkt, akcesoria oraz oprogramowanie s zgodne z dyrektywami 2014/53/EU. Peen tekst deklaracji zgodnoci UE oraz oprogramowanie sprztowe do produktu mona pobra na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessrios e o software esto em conformidade com a diretiva 2014/53/UE. O texto completo da declarao de conformidade da UE e do firmware Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za prenos na strani izdelka na www.dlink.com. Spolonos D-Link tmto vyhlasuje, e tento produkt, prsluenstvo a softvr s v slade so smernicou 214/53/
E. pln znenie vyhlsenia E o zhode a firmvri produktu s k dispozcii na prevzatie zo strnky produktu www. dlink.com. D-Link Corporation tten vakuuttaa, ett tm tuote, lisvarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Tydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com. D-Link DIR-2680 User Manual 152 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY Svenska[Swedish]
slenska [Icelandic]
Norsk [Norwegian]
D-Link Corporation frskrar hrmed att denna produkt, tillbehr och programvara verensstmmer med direktiv 2014/53/EU. Hela texten med EU-frskran om verensstmmelse och produkt-firmware kan hmtas frn produktsidan p www.dlink.com. Hr me lsir D-Link Corporation v yfir a essi vara, fylgihlutir og hugbnaur eru samrmi vi tilskipun 2014/53/EB. Skja m ESB-samrmisyfirlsinguna heild sinni og fastbna vrunnar af vefsu vrunnar www. dlink.com. Herved erklrer D-Link Corporation at dette produktet, tilbehret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden p www.dlink.com. Warning Statement:
The power outlet should be near the device and easily accessible. D-Link DIR-2680 User Manual 153 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY):
This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY. Usage Notes:
To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed. This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz band within the EU. Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless. HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPISCHEN GEMEINSCHAFT ( NUR FR EIN DRAHTLOSES PRODUKT ) Der Betrieb dieses Gerts in der Europischen Gemeinschaft bei Nutzung von Kanlen im 5,15-5,35 GHz Frequenzband ist ausschlielich auf Innenrume beschrnkt, um das Interferenzpotential zu reduzieren. Bei diesem Gert handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Lndern - ausgenommen Frankreich. Der Betrieb dieses Gerts ist in den folgenden Lndern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebrauchshinweise:
Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschrnkungen, dem jeweiligen Land, in dem das Gert zum Einsatz kommt, entsprechend, auf die Produkte angewandt. Die Funktionalitt im Ad-hoc-Modus bei Betrieb auf 5 GHz ist fr dieses Gert eingeschrnkt. Bei dem Ad-hoc-Modus handelt es sich um eine Peer-to-Peer-Kommunikation zwischen zwei Client-Gerten ohneeinen Access Point. Access Points untersttzen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gert eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DIR-2680 User Manual 154 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUT EUROPENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) Cet appareil est limit un usage intrieur lorsqu'il est utilis dans la Communaut europenne sur les canaux de la bande de 5,15 5,35 GHz afin de rduire les risques d'interfrences. Cet appareil est un systme de transmission large bande (metteur-rcepteur) de 2,4 GHz, destin tre utilis dans tous les tats-
membres de l'UE et les pays de l'AELE. Cet quipement peut tre utilis dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notes d'utilisation:
Pour rester en conformit avec la rglementation nationale europenne en matire d'utilisation du spectre, des limites de frquence et de canal seront appliques aux produits selon le pays o l'quipement sera dploy. Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication directe pair pair entre deux priphriques clients sans point d'accs. Les points d'accs prendront en charge les fonctionnalits DFS (Dynamic Frequency Selection) et TPC (Transmit Power Control) au besoin lors du fonctionnement dans la bande de 5 GHz au sein de l'UE. Merci de vous rfrer au guide d'utilisation ou de la fiche technique afin de vrifier si votre produit utilise 2.4 GHz et/ou 5 GHz sans fil. AVISO DE USO DE LA LAN DE RADIO INALMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALMBRICO) El uso de este dispositivo est restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35 GHz, para reducir la posibilidad de interferencias. Este dispositivo es un sistema de transmisin (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los pases de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notas de uso:
Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarn limitaciones de frecuencia y canal en los productos en funcin del pas en el que se pondr en funcionamiento el equipo. Este dispositivo tiene restringido el funcionamiento en modo Ad-hoc mientras funcione a 5 Ghz. El modo Ad-hoc es la comunicacin directa de igual a igual entre dos dispositivos cliente sin un punto de acceso. Los puntos de acceso admitirn la funcionalidad DFS (Seleccin de frecuencia dinmica) y TPC (Control de la potencia de transmisin) si es necesario cuando funcionan a 5 Ghz dentro de la UE. Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalmbricas de 2.4 GHz y/o la de 5 GHz. D-Link DIR-2680 User Manual 155 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY AVVISO PER LUSO DI LAN RADIO WIRELESS NELLA COMUNIT EUROPEA (SOLO PER PRODOTTI WIRELESS) Nella Comunit europea, luso di questo dispositivo limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato alluso in tutti gli stati membri dellUnione europea e nei paesi EFTA. Questo dispositivo pu essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Note per luso Al fine di mantenere la conformit alle normative nazionali europee per luso dello spettro di frequenze, saranno applicate limitazioni sulle frequenze e sui canali per il prodotto in conformit alle normative del paese in cui il dispositivo viene utilizzato. Questo dispositivo non pu essere attivato in modalit Ad-hoc durante il funzionamento a 5 Ghz. La modalit Ad-hoc una comunicazione diretta peer-to-peer fra due dispositivi client senza un punto di accesso. I punti di accesso supportano le funzionalit DFS (Dynamic Frequency Selection) e TPC (Transmit Power Control) richieste per operare a 5 Ghz nellUnione europea. Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz e/o 5 GHz. KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR DRAADLOOS PRODUCT) Dit toestel is beperkt tot gebruik binnenshuis wanneer het wordt gebruikt in de Europese Gemeenschap gebruik makend van kanalen in de 5.15-5.35 GHz band om de kans op interferentie te beperken. Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebruiksaanwijzingen:
Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast op de producten volgens het land waar de uitrusting gebruikt zal worden. Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie tussen twee klantenapparaten zonder een toegangspunt. Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DIR-2680 User Manual 156 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application. Keep the product away from radiators and other heat sources. Always unplug the product from mains power before cleaning and use a dry lint free cloth only. SICHERHEITSVORSCHRIFTEN Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewhrleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts. Weitere Details finden Sie in den Benutzeranleitungen zum Produkt. Statische Elektrizitt kann elektronischen Komponenten schaden. Um Schden durch statische Aufladung zu vermeiden, leiten Sie elektrostatische Ladungen von Ihrem Krper ab,
(z. B. durch Berhren eines geerdeten blanken Metallteils), bevor Sie das Produkt berhren. Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Fr einige Produkte mit austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen. Vermeiden Sie, dass Speisen oder Flssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstnde in die Gehuseschlitze oder
-ffnungen Ihres Produkts. Verwenden Sie dieses Produkt nicht in unmittelbarer Nhe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation, es sei denn, es ist speziell zur Nutzung in Auenbereichen vorgesehen und eingestuft. Halten Sie das Produkt von Heizkrpern und anderen Quellen fern, die Wrme erzeugen. Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschlielich ein trockenes fusselfreies Tuch. D-Link DIR-2680 User Manual 157 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY CONSIGNES DE SCURIT Les consignes gnrales de scurit ci-aprs sont fournies afin dassurer votre scurit personnelle et de protger le produit dventuels dommages. Veuillez consulter les consignes dutilisation du produit pour plus de dtails. Llectricit statique peut endommager les composants lectroniques. Dchargez llectricit statique de votre corps (en touchant un objet en mtal reli la terre par exemple) avant de toucher le produit. Nessayez pas dintervenir sur le produit et ne le dmontez jamais. Pour certains produits contenant une batterie remplaable par lutilisateur, veuillez lire et suivre les consignes contenues dans le manuel dutilisation. Ne renversez pas daliments ou de liquide sur le produit et ninsrez jamais dobjets dans les orifices. Nutilisez pas ce produit proximit dun point deau, de zones trs humides ou de condensation sauf si le produit a t spcifiquement conu pour une application extrieure. loignez le produit des radiateurs et autres sources de chaleur. Dbranchez toujours le produit de lalimentation avant de le nettoyer et utilisez uniquement un chiffon sec non pelucheux. INSTRUCCIONES DE SEGURIDAD Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto frente a posibles daos. No olvide consultar las instrucciones del usuario del producto para obtener ms informacin. La electricidad esttica puede resultar nociva para los componentes electrnicos. Descargue la electricidad esttica de su cuerpo (p. ej., tocando algn metal sin revestimiento conectado a tierra) antes de tocar el producto. No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batera reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. No derrame comida o lquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo. No utilice este producto cerca del agua, en zonas con humedad o condensacin elevadas a menos que el producto est clasificado especficamente para aplicacin en exteriores. Mantenga el producto alejado de los radiadores y de otras fuentes de calor. Desenchufe siempre el producto de la alimentacin de red antes de limpiarlo y utilice solo un pao seco sin pelusa. D-Link DIR-2680 User Manual 158 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per lutente del prodotto. Lelettricit statica pu essere pericolosa per i componenti elettronici. Scaricare lelettricit statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto. Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dallutente, leggere e seguire le istruzioni riportate nel manuale dellutente. Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto. Non usare questo prodotto vicino allacqua, in aree con elevato grado di umidit o soggette a condensa a meno che il prodotto non sia specificatamente approvato per uso in ambienti esterni. Tenere il prodotto lontano da caloriferi e altre fonti di calore. Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci filacce. VEILIGHEIDSINFORMATIE De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie. Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het aanraken van geaard bloot metaal) voordat uhet product aanraakt. U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen. Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen. Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product specifiek geclassificeerd is voor gebruik buitenshuis. Houd het product uit de buurt van radiators en andere warmtebronnen. U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-2680 User Manual 159 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY Disposing of and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions. To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com. DEUTSCH DE Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gem bestehender rtlicher Gesetze und Vorschriften nicht ber den normalen Hausmll entsorgt werden sollte, sondern einer Wiederverwertung zuzufhren ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehrde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Fr die Annahme solcher Produkte erheben einige dieser Stellen keine Gebhren. Durch ein auf diese Weise durchgefhrtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche Gesundheit zu schtzen. D-Link und die Umwelt D-Link ist sich den mglichen Auswirkungen seiner Geschftsttigkeiten und seiner Produkte auf die Umwelt bewusst und fhlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel grtmglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung. D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren. Wenn Sie mehr ber unsere umweltgerechten Produkte und Verpackungen wissen mchten, finden Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DIR-2680 User Manual 160 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY FRANAIS FR Ce symbole appos sur le produit ou son emballage signifie que, conformment aux lois et rglementations locales, ce produit ne doit pas tre limin avec les dchets domestiques mais recycl. Veuillez le rapporter un point de collecte prvu cet effet par les autorits locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manire, vous aidez prserver lenvironnement et protger la sant de lhomme. D-Link et lenvironnement Chez D-Link, nous sommes conscients de l'impact de nos oprations et produits sur l'environnement et nous engageons le rduire. Pour limiter cet impact, D-Link conoit et fabrique ses produits de manire aussi cologique que possible, en utilisant des matriaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages. D-Link recommande de toujours teindre ou dbrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous raliserez ainsi des conomies dnergie et rduirez vos missions de CO2. Pour en savoir plus sur les produits et emballages respectueux de lenvironnement, veuillez consulter le www.dlinkgreen.com. ESPAOL ES Este smbolo en el producto o el embalaje significa que, de acuerdo con la legislacin y la normativa local, este producto no se debe desechar en la basura domstica sino que se debe reciclar. Llvelo a un punto de recogida designado por las autoridades locales una vez que ha llegado al fin de su vida til; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos. D-Link y el medio ambiente En D-Link, comprendemos y estamos comprometidos con la reduccin del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link disea y fabrica sus productos para que sean lo ms ecolgicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje. D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estn utilizando. Al hacerlo, contribuir a ahorrar energa y a reducir las emisiones de CO2. Para obtener ms informacin acerca de nuestros productos y embalajes ecolgicos, visite el sitio www.dlinkgreen.com. D-Link DIR-2680 User Manual 161 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformit alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorit locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuir a preservare l'ambiente e a salvaguardare la salute umana. D-Link e l'ambiente D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il pi possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicit sia per i prodotti che per gli imballaggi. D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuir a risparmiare energia e a ridurre le emissioni di anidride carbonica. Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com. NEDERLANDS NL Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen. D-Link en het milieu Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. D-Link DIR-2680 User Manual 162 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, e zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzuca jak odpady czy mieci z gospodarstwa domowego, lecz naley go podda procesowi recyklingu. Po zakoczeniu uytkowania produktu, niektre odpowiednie do tego celu podmioty przyjm takie produkty nieodpatnie, dlatego prosimy dostarczy go do punktu zbirki wskazanego przez lokalne wadze. Poprzez proces recyklingu i dziki takiemu postpowaniu z produktem oraz jego opakowaniem, pomog Pastwo chroni rodowisko naturalne i dba o ludzkie zdrowie. D-Link i rodowisko D-Link podchodzimy w sposb wiadomy do ochrony otoczenia oraz jestemy zaangaowani w zmniejszanie wpywu naszych dziaa i produktw na rodowisko naturalne. W celu zminimalizowania takiego wpywu firma D-Link konstruuje i wytwarza swoje produkty w taki sposb, aby byy one jak najbardziej przyjazne rodowisku, stosujc do tych celw materiay nadajce si do powtrnego wykorzystania, charakteryzujce si ma toksycznoci zarwno w przypadku samych produktw jak i opakowa. Firma D-Link zaleca, aby Pastwo zawsze prawidowo wyczali z uytku swoje produkty D-Link, gdy nie s one wykorzystywane. Postpujc w ten sposb pozwalaj Pastwo oszczdza energi i zmniejsza emisje CO2. Aby dowiedzie si wicej na temat produktw i opakowa majcych wpyw na rodowisko prosimy zapozna si ze stron Internetow www. dlinkgreen.com. ESKY CZ Tento symbol na vrobku nebo jeho obalu znamen, e podle mstn platnch pedpis se vrobek nesm vyhazovat do komunlnho odpadu, ale odeslat k recyklaci. A vrobek doslou, odneste jej prosm na sbrn msto uren mstnmi ady k tomuto elu. Nkter sbrn msta pijmaj vrobky zdarma. Recyklac vrobku i obalu pomhte chrnit ivotn prosted i lidsk zdrav. D-Link a ivotn prosted Ve spolenosti D-Link jsme si vdomi vlivu naich provoz a vrobk na ivotn prosted a sname se o minimalizaci tchto vliv. Proto sv vrobky navrhujeme a vyrbme tak, aby byly co nejekologitj, a ve vrobcch i obalech pouvme recyklovateln a nzkotoxick materily. Spolenost D-Link doporuuje, abyste sv vrobky znaky D-Link vypnuli nebo vythli ze zsuvky vdy, kdy je nepouvte. Pomete tak etit energii a snit emise CO2. Vce informac o naich ekologickch vrobcch a obalech najdete na adrese www.dlinkgreen.com. D-Link DIR-2680 User Manual 163 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY MAGYAR HU Ez a szimblum a termken vagy a csomagolson azt jelenti, hogy a helyi trvnyeknek s szablyoknak megfelelen ez a termk nem semmisthet meg a hztartsi hulladkkal egytt, hanem jrahasznostsra kell kldeni. Krjk, hogy a termk lettartamnak elteltt kveten vigye azt a helyi hatsg ltal kijellt gyjthelyre. A termkek egyes helyeken ingyen elhelyezhetk. A termk s a csomagols jrahasznostsval segti vdeni a krnyezetet s az emberek egszsgt. A D-Link s a krnyezet A D-Linknl megrtjk s elktelezettek vagyunk a mveleteink s termkeink krnyezetre gyakorolt hatsainak cskkentsre. Az ezen hats cskkentse rdekben a D-Link a lehet leginkbb krnyezetbart termkeket tervez s gyrt azltal, hogy jrahasznosthat, alacsony krosanyag-
tartalm termkeket gyrt s csomagolsokat alkalmaz. A D-Link azt javasolja, hogy mindig kapcsolja ki vagy hzza ki a D-Link termkeket a tpforrsbl, ha nem hasznlja azokat. Ezzel segt az energia megtakartsban s a szndioxid kibocstsnak cskkentsben. Krnyezetbart termkeinkrl s csomagolsainkrl tovbbi informcikat a www.dlinkgreen.com weboldalon tudhat meg. NORSK NO Dette symbolet p produktet eller forpakningen betyr at dette produktet iflge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter nr det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved p denne mten gjenvinne produktet og forpakningen hjelper du verne miljet og beskytte folks helse. D-Link og miljet Hos D-Link forstr vi oss p og er forpliktet til minske innvirkningen som vr drift og vre produkter kan ha p miljet. For minimalisere denne innvirkningen designer og lager D-Link produkter som er s miljvennlig som mulig, ved bruke resirkulerbare, lav-toksiske materialer bde i produktene og forpakningen. D-Link anbefaler at du alltid slr av eller frakobler D-Link-produkter nr de ikke er i bruk. Ved gjre dette hjelper du spare energi og redusere CO2-utslipp. For mer informasjon angende vre miljansvarlige produkter og forpakninger kan du g til www.dlinkgreen.com. D-Link DIR-2680 User Manual 164 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY DANSK DK Dette symbol p produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke m bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, nr det er net til slutningen af dets levetid. I nogle tilflde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug p denne mde bidrager du til at beskytte miljet og den menneskelige sundhed. D-Link og miljet Hos D-Link forstr vi og bestrber os p at reducere enhver indvirkning, som vores aktiviteter og produkter kan have p miljet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, s de er s miljvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i bde produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, nr de ikke er i brug. Ved at gre det bidrager du til at spare energi og reducere CO2-udledningerne. Du kan finde flere oplysninger om vores miljmssigt ansvarlige produkter og emballage p www.dlinkgreen.com. SUOMI FI Tm symboli tuotteen pakkauksessa tarkoittaa, ett paikallisten lakien ja snnsten mukaisesti tt tuotetta ei pid hvitt yleisen kotitalousjtteen seassa vaan se tulee toimittaa kierrtettvksi. Kun tuote on elinkaarensa pss, toimita se lhimpn viranomaisten hyvksymn kierrtyspisteeseen. Kierrttmll kytetyn tuotteen ja sen pakkauksen autat tukemaan sek ympristn ett ihmisten terveytt ja hyvinvointia. D-Link ja ymprist D-Link ymmrt ympristnsuojelun trkeyden ja on sitoutunut vhentmn tuotteistaan ja niiden valmistuksesta ympristlle mahdollisesti aiheutuvia haittavaikutuksia. Nm negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman ympristystvllisiksi kyttmll kierrtettvi, alhaisia pitoisuuksia haitallisia aineita sisltvi materiaaleja sek tuotteissaan ett niiden pakkauksissa. Suosittelemme, ett irrotat D-Link-tuotteesi virtalhteest tai sammutat ne aina, kun ne eivt ole kytss. Toimimalla nin autat sstmn energiaa ja vhentmn hiilidioksiidipstj. Lue lis ympristystvllisist D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DIR-2680 User Manual 165 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY SVENSKA SE Den hr symbolen p produkten eller frpackningen betyder att produkten enligt lokala lagar och freskrifter inte skall kastas i hushllssoporna utan i stllet tervinnas. Ta den vid slutet av dess livslngd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att p detta stt tervinna produkten och frpackningen hjlper du till att bevara miljn och skydda mnniskors hlsa. D-Link och miljn P D-Link frstr vi och r fast beslutna att minska den pverkan vra verksamheter och produkter kan ha p miljn. Fr att minska denna pverkan utformar och bygger D-Link sina produkter fr att de ska vara s miljvnliga som mjligt, genom att anvnda tervinningsbara material med lg gifthalt i bde produkter och frpackningar. D-Link rekommenderar att du alltid stnger av eller kopplar ur dina D-Link produkter nr du inte anvnder dem. Genom att gra detta hjlper du till att spara energi och minska utslpp av koldioxid. Fr mer information om vra miljansvariga produkter och frpackningar www.dlinkgreen.com. PORTUGUS PT Este smbolo no produto ou embalagem significa que, de acordo com as leis e regulamentaes locais, este produto no dever ser eliminado juntamente com o lixo domstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o fim da sua vida til, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a sade humana. A D-Link e o ambiente Na D-Link compreendemos e comprometemo-nos com a reduo do impacto que as nossas operaes e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constri os seus produtos para que estes sejam o mais inofensivos para o ambiente possvel, utilizando meteriais reciclveis e no txicos tanto nos produtos como nas embalagens. A D-Link recomenda que desligue os seus produtos D-Link quando estes no se encontrarem em utilizao. Com esta aco ajudar a poupar energia e reduzir as emisses de CO2. Para saber mais sobre os nossos produtos e embalagens responsveis a nvel ambiental visite www.dlinkgreen.com. D-Link DIR-2680 User Manual 166 Appendix D - Regulatory InformationDRAFT FOR CERTIFICATION USE ONLY
This product uses the FCC Data API but is not endorsed or certified by the FCC