IR862LA1 AC1750 Wi-Fi Router, Wireless AC1600 Dual Band Gigabit Cloud Router User Manual-2

 

Register mydlink Service Wizard: Step 2 When registering a new account, the following page appears. The following parameters will be available for configuration:

E-mail Address (Account Name):

Enter your e-mail address here. This e-mail address will also become your account name. Password: Enter your preferred password choice here. here. Confirm Password: Re-enter your preferred password choice Last Name: Enter your last name here. First Name: Enter your first name here. Accept terms and conditions:

Tick this option to accept the mydlink terms and conditions. Click the Next button to proceed to the next step. Click the Prev button to return to the previous step. Click the Cancel button to discard the changes made and return to the main page. When logging in with an existing account, the following page appears. The following parameters will be available for configuration:

E-mail Address (Account Name):

Enter your e-mail address here. This e-mail address will also be your account name. Password: Enter your preferred password choice here. Click the Login button to login using these account details. Click the Prev button to return to the previous step. Click the Cancel button to discard the changes made and return to the main page. 81 D-Link DIR-862L User Manual At any point during this wizard, we can change the prefered language used. To change the language, select the desired language option from the Language drop-down menu, found on the top right of this page. End of Wizard 82 D-Link DIR-862L User Manual This will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Advanced Virtual Server Name:

Enter a name for the rule or select an application from the drop-down menu. Select an application and click

<< to populate the fields. IP Address:

Private Port/

Public Port:

Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol Type:

Select TCP, UDP, or Both from the drop-down menu. Schedule:

The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools

> Schedules section. Inbound Filter:

Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. 83 D-Link DIR-862L User ManualSection 3 - Configuration Port Forwarding This will allow you to open a single port or a range of ports. Name:

Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address:

Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. TCP/UDP:

Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma. Example: 24,1009,3000-4000 Schedule:

The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools

> Schedules section. Inbound Filter:

Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. 84 D-Link DIR-862L User ManualSection 3 - Configuration Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Application Rules makes some of these applications work with the DIR-862L. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger Port field, select the protocol type as TCP or UDP, then enter the firewall

(public) ports associated with the trigger port to open them for inbound traffic. The DIR-862L provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Name:

Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click <<. Trigger:

This is the port used to trigger the application. It can be either a single port or a range of ports. Traffic Type:

Select the protocol of the trigger port (TCP, UDP, or Both). Firewall:

This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type:

Select the protocol of the firewall port (TCP, UDP, or Both). Schedule:

The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. 85 D-Link DIR-862L User ManualSection 3 - Configuration QoS Engine The QoS Engine option helps improve your network performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classified automatically. The QoS section contains a queuing mechanism, traffic shaping and classification. It supports two kinds of queuing mechanisms. Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ). SPQ will process traffic based on traffic priority. Queue1 has the highest priority and Queue4 has the lowest priority. WFQ will process traffic based on the queue weight. Users can configure each queues weight. The sum of all the queues weight must be 100. When surfing the Internet, the system will do traffic shaping based on the uplink and downlink speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do QoS based on the queues priority or weight. The following parameters will be available for configuration:

Enable QoS Engine:

Automatic Uplink Speed:

This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. The speed at which data can be transferred from the router to your Internet Service Provider (ISP). This is determined by your ISP. ISPs often define speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Check this box to keep your uplink speed optimized. Otherwise, you may set an uplink speed of your own in Manual Uplink Speed. Checkbox:

Name:

Priority:

Protocol:

IP Range:

Port Range:

Check this to enable an individual rule. Create a name for this rule. Set the priority of the rule. 1 is the highest. Select the protocol the network traffic will be transmitted over. Select the IP range for the rule to be applied to. The Local range will apply to devices within your network, and the Remote range will apply to devices on the Internet. Select the ports for this rule to be applied to. Different applications will send traffic over different ports. An online game, email program, and video chat client will all likely use different ports. 86 D-Link DIR-862L User ManualSection 3 - Configuration Network Filter Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure MAC Filtering:

Select Turn MAC Filtering Off, Allow MAC addresses listed below, or Deny MAC addresses listed below from the drop-down menu. MAC Address:

Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client:

Select a DHCP client from the drop-down menu and click << to copy that MAC Address. 87 D-Link DIR-862L User ManualSection 3 - Configuration Access Control The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy:

Click the Add Policy button to start the Access Control Wizard. DIR-862L Click Next to continue with the wizard. Access Control Wizard 88 D-Link DIR-862L User ManualSection 3 - Configuration Enter a name for the policy and then click Next to continue. Select a schedule (e.g. Always) from the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. Address Type - Select IP address, MAC address, or Other Machines. IP Address - Enter the IP address of the computer you want to apply the rule to. Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00). Select the filtering method and then click Next to continue. 89 D-Link DIR-862L User ManualSection 3 - Configuration Enter the rule:

Enable - Check to enable the rule. Name - Enter a name for your rule. Dest IP Start - Enter the starting IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. 90 D-Link DIR-862L User ManualSection 3 - Configuration Website Filters Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network. To use this feature select to Allow or Deny, enter the domain or website and click Save Settings. You must also select Apply Web Filter under the Access Control section. Add Website Filtering Rule:

Select either DENY computers access to ONLY these sites or ALLOW computers access to ONLY these sites. Website URL/

Domain:

Enter the keywords or URLs that you want to allow or block. Click Save Settings. 91 D-Link DIR-862L User ManualSection 3 - Configuration Inbound Filters The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. Name:

Enter a name for the inbound filter rule. Action:

Select Allow or Deny. Enable:

Check to enable rule. Remote IP Start:

Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Remote IP End:

Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range. Add:

Click the Add button to apply your settings. You must click Save Settings at the top to save the settings. Inbound Filter Rules List:

This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. 92 D-Link DIR-862L User ManualSection 3 - Configuration Firewall Settings A firewall protects your network from the outside world. The DIR-862L offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world. Enable SPI:

SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more states per session. It validates that the traffic passing through the session conforms to the protocol. DIR-862L Anti-Spoof Check:

Enable this feature to protect your network from certain kinds of spoofing attacks, where the attackers disguise their origin. DMZ IP Address:

Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network Settings page so that the IP address of the DMZ machine does not change. PPTP:

Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol. IPSEC (VPN):

Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. RTSP:

Allows applications that uses Real Time Streaming Protocol to receive streaming media from the Internet. QuickTime and Real Player are some of the common applications using this protocol. SIP:

Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. 93 D-Link DIR-862L User ManualSection 3 - Configuration The Routing option is an advanced method of customizing specific routes of data through your network. Routing Name:

Enter a name for your route. Destination IP:

Enter the IP address of packets that will take this route. DIR-862L Netmask:

Enter the netmask of the route, please note that the octets must match your destination IP address. Gateway:

Enter your next hop gateway to be taken if this route is used. Metric:

The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface:

Select the interface that the IP packet must use to transit out of the router when this route is used. 94 D-Link DIR-862L User ManualSection 3 - Configuration Advanced Wireless Transmit Power:

Set the transmit power of the antennas. WLAN Partition:

This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it. DIR-862L WMM Enable:

WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. HT20/40 Coexistence:

Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless networks channel over-lapping and causing interference, the router will automatically change to 20MHz. 95 D-Link DIR-862L User ManualSection 3 - Configuration Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the Initial setup as well as the Add New Device processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufactures. The process is just as easy as pressing a button for the Push-Button Method or correctly entering an 8-digit code. Enable:

Enable/dsiable the Wi-Fi Protected Setup feature. Lock WPS-PIN Setup:

PIN Settings:

Tick this option to lock the configured PIN. DIR-862L A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Only the Administrator (admin account) can change or reset the PIN. Current PIN:

Shows the current PIN. Reset PIN to Default:

Generate New PIN:

Restore the default PIN of the router. Create a random number that is a valid PIN. This becomes the routers PIN. You can then copy this PIN to the user interface of the wireless client. This Wizard helps you add wireless devices to the wireless network. Add Wireless Station:

Starts a wizard which will display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router within 120 seconds. The status LED on the router will flash three times if the device has been successfully added to the network. There are several ways to add a wireless device to your network. A registrar controls access to the wireless network. A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Note: You may also press the physical WPS button on the device. 96 D-Link DIR-862L User ManualSection 3 - Configuration Advanced Network Settings Enable UPnP:

To use the Universal Plug and Play (UPnP) feature click on Enabled. UPnP provides compatibility with networking equipment, software and peripherals. DIR-862L WAN Ping:

Checking the box will allow the DIR-862L to respond to pings. Unchecking the box may provide some extra security from hackers. WAN Port Speed:

You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, or Auto (recommended). Enable Multicast Streams:

Check the box to allow multicast traffic to pass through the router from the Internet (IPv4). Enable IPV6 Multicast Streams:

Check the box to allow multicast traffic to pass through the router from the Internet (IPv6). 97 D-Link DIR-862L User ManualSection 3 - Configuration The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. Guest Zone Enable Guest Zone:

Schedule:

Check to enable the Guest Zone feature. The schedule of time when the Guest Zone will be active. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section or click Add New. DIR-862L Wireless Network Name:

Enter a wireless network name (SSID) that is different from your main wireless network. Enable Routing Between Zones:

Check to allow network connectivity between the different zones created. Security Mode:

Select the type of security or encryption you would like to enable for the guest zone. 98 D-Link DIR-862L User ManualSection 3 - Configuration The DIR-862Ls IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The DIR-862Ls IPv6 Firewall functions in a similar way to the IP Filters feature. IPv6 Firewall Enable Checkbox:

Check the box to enable the IPv6 firewall simple security. Configure IPv6 Firewall:

Select an action from the drop-down menu. DIR-862L Name:

Enter a name to identify the IPv6 firewall rule. Schedule:

Use the drop-down menu to select the time schedule that the IPv6 Firewall Rule will be enabled on. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Source:

Use the Source drop-down menu to specify the interface that connects to the source IPv6 addresses of the firewall rule. IP Address Range:

Enter the source IPv6 address range in the adjacent IP Address Range field. Interface:

Use the Interface drop-down menu to specify the interface that connects to the destination IP addresses of the firewall rule. Protocol:

Select the protocol of the firewall port (All, TCP, UDP, or ICMP). Port Range:

Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. 99 D-Link DIR-862L User ManualSection 3 - Configuration This page allows you to specify custom routes that determine how data is moved around your network. IPv6 Routing Route List:

Check the box next to the route you wish to enable. Name:

Enter a specific name to identify this route. Destination IP/

Prefix Length:

This is the IP address of the router used to reach the specified destination or enter the IPv6 address prefix length of the packets that will take this route. DIR-862L Metric:

Enter the metric value for this rule here. Interface:

Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router. Gateway:

Enter the next hop that will be taken if this route is used. 100 D-Link DIR-862L User ManualSection 3 - Configuration Tools Admin This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. Admin Password:

Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. User Password:

Enter the new password for the User login. If you login as the User, you cannot change the settings (you can only view them). DIR-862L Gateway name:

Enter a name for your router. Enable Graphical Authentication:

Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Enable HTTPS Server:

Check to enable HTTPS to connect to the router securely. This means to connect to the router, you must enter https://192.168.0.1 (for example) instead of http://192.168.0.1. Enable Remote Management:

Remote management allows the DIR-862L to be configured from the Internet by a web browser. A username/password is still required to access the Web Management interface. Remote Admin Port:

The port number used to access the DIR-862L is used in the URL. Example:

http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-862L and 8080 is the port used for the Web Management interface. If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely. Remote Admin Inbound Filter:

This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. Details will display the current status. 101 D-Link DIR-862L User ManualSection 3 - Configuration The Time configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time Time:

Displays the current date and time of the router. Time Zone:

Select your Time Zone from the drop-down menu. DIR-862L Enable Daylight Saving:

To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Enable NTP Server:

NTP is short for Network Time Protocol. A NTP server will sync the time and date with your router. This will only connect to a server on the Internet, not a local server. Check the box to enable this feature. NTP Server Used:

Enter the IP address of a NTP server or select one from the drop-down menu. Manual:

To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computers Time Settings to synch the date and time with the computer you are currently on. 102 D-Link DIR-862L User ManualSection 3 - Configuration The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. SysLog Enable Logging to SysLog Server:

Check this box to send the router logs to a SysLog Server. SysLog Server IP Address:

The address of the SysLog server that will be used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). DIR-862L 103 D-Link DIR-862L User ManualSection 3 - Configuration The Email feature can be used to send system log files, router alert messages, and firmware update notifications to your email address. Email Settings Enable Email Notification:

When this option is enabled, router activity logs are emailed to a designated email address. From Email Address:

This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. DIR-862L To Email Address:

Enter the email address where you want the email sent. SMTP Server Address:

Enter the SMTP server address for sending email. SMTP Server Port:

Enter the SMTP port used on the server. Enable Authentication:

Check this box if your SMTP server requires authentication. Account Name:

Enter your account for sending email. Password:

Enter the password associated with the account. Re-type the password associated with the account. On Log Full:

When this option is selected, logs will be sent via email to your account when the log is full. On Schedule:

Selecting this option will send the logs via email according to schedule. Schedule:

This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to Tools > Schedules. 104 D-Link DIR-862L User ManualSection 3 - Configuration This section allows you to manage the routers configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that youve created. System Save Settings to Local Hard Drive:

Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. A file dialog will appear, allowing you to select a location and file name for the settings. DIR-862L Load Settings from Local Hard Drive:

Restore to Factory Default Settings:

Use this option to load previously saved router configuration settings. First, use the Choose File option to find a previously saved file of configuration settings. Then, click the Restore Configuration From File button to transfer those settings to the router. This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device:

Click to reboot the router. 105 D-Link DIR-862L User ManualSection 3 - Configuration Firmware You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer you are using. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site. Browse:

Upload:

After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. Once you have a firmware update on your computer, use this option to browse for the file and then upload the information into the access point. DIR-862L Language Pack You can change the language of the web UI by uploading available language packs. Browse:

After you have downloaded the new language pack, click Browse to locate the language pack file on your hard drive. Click Upload to complete the language pack upgrade. 106 D-Link DIR-862L User ManualSection 3 - Configuration Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc) using a domain name that you have purchased

(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is. Enable Dynamic DNS:

Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS. Server Address:

Select your DDNS provider from the drop-down menu or enter the DDNS server address. DIR-862L Host Name:

Enter the Host Name that you registered with your DDNS service provider. Username or Key:

Enter the Username or key for your DDNS account. Password or Key:

Enter the Password or key for your DDNS account. Timeout:

Enter a timeout time (in hours). Status:

Displays the current connection status. IPv6:

You can also enable DDNS for usage over IPv6 in the same manner as above for IPv4. 107 D-Link DIR-862L User ManualSection 3 - Configuration System Check Ping Test:

The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. DIR-862L IPv6 Ping Test:

Enter the IPv6 address that you wish to Ping and click Ping. Ping Results:

The results of your ping attempts will be displayed here. 108 D-Link DIR-862L User ManualSection 3 - Configuration Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. Schedules Name:

Enter a name for your new schedule. Days:

Select a day, a range of days, or All Week to include every day. DIR-862L Time:

Check All Day - 24hrs or enter a start and end time for your schedule. Save:

You must click Save Settings at the top for your schedules to go into effect. Schedule Rules List:

The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. 109 D-Link DIR-862L User ManualSection 3 - Configuration Status Device Info This page displays the current information for the DIR-862L. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. General:

Displays the routers time and firmware version. DIR-862L WAN:

Displays the MAC address and the public IP settings LAN:

Displays the MAC address and the private (local) IP settings for the router. Wireless LAN1:

Displays the 2.4 GHz wireless MAC address and your wireless settings such as SSID and Channel. Wireless LAN2:

Displays the 5 GHz wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers:

Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). 110 D-Link DIR-862L User ManualSection 3 - Configuration Logs The router automatically logs (records) events of possible interest in its internal memory. If there isnt enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. Log Options:

You can select the types of messages that you want to display from the log. System Activity, Debug Information, Attacks, Dropped Packets, and Notice messages can be selected. Click Apply Log Settings Now to activate your settings. DIR-862L Refresh:

Updates the log details on the screen so it displays any recent activity. First Page:

Click to go to the first page. Last Page:

Click to go to the last page. Previous:

Click to go back one page. Next:

Click to go to the next page. Clear:

Clears all of the log contents. Email Now:

This option will send a copy of the router log to your email address configured in the Tools > Email Settings screen. Save Log:

This option will save the router log to a file on your computer. 111 D-Link DIR-862L User ManualSection 3 - Configuration The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-862L on both the WAN, LAN ports and the wireless segments. The traffic counter will reset if the device is rebooted. Statistics DIR-862L 112 D-Link DIR-862L User ManualSection 3 - Configuration The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. Internet Sessions DIR-862L 113 D-Link DIR-862L User ManualSection 3 - Configuration This page will display your current routing table. Routing DIR-862L 114 D-Link DIR-862L User ManualSection 3 - Configuration The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. Wireless DIR-862L 115 D-Link DIR-862L User ManualSection 3 - Configuration The IPv6 page displays a summary of the Routers IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. IPv6 DIR-862L 116 D-Link DIR-862L User ManualSection 3 - Configuration This page displays the IPV6 routing details configured for your router. IPV6 Routing DIR-862L 117 D-Link DIR-862L User ManualSection 3 - Configuration This page provides help and explanations for different sections of the firmware. Support DIR-862L 118 D-Link DIR-862L User ManualSection 3 - Configuration Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button

(or a software utility with WPS) that you can press to connect to the DIR-862L router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:

Step 1 - Press the WPS button on the DIR-862L for about 1 second. The Internet LED on the front will start to blink. WPS Button Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. 119 D-Link DIR-862L User ManualSection 4 - Security Windows 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon 120 D-Link DIR-862L User ManualSection 4 - Security 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. 121 D-Link DIR-862L User ManualSection 4 - Security 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. 122 D-Link DIR-862L User ManualSection 4 - Security The WPS feature of the DIR-862L can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:

WPS 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. 123 D-Link DIR-862L User ManualSection 4 - Security 3. Double-click the DIR-862L. 4. Input the WPS PIN number (displayed in the WPS window on the Routers LCD screen or in the Setup > Wireless Setup menu in the Routers Web UI) and click Next. 124 D-Link DIR-862L User ManualSection 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. 125 D-Link DIR-862L User ManualSection 4 - Security 7. The following window appears while the Router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. 126 D-Link DIR-862L User ManualSection 4 - Security Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/

IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 127 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. 128 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. 129 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network WPS/WCN 2.0 This router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The following instructions for setting this up depend on whether you are using Windows Vista to configure the router, or third party software. When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vistas built-in support for WCN 2.0, use software provided by a third party, or manually configure. If you are running Windows Vista, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. 130 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/

IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 131 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. 132 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. 133 D-Link DIR-862L User ManualSection 5 - Connecting to a Wireless Network Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-862L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why cant I access the web-based configuration utility?

When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:

- Microsoft Internet Explorer 7 and higher

- Mozilla Firefox 3.5 and higher

- Google Chrome 8 and higher

- Apple Safari 4 and higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. 134 D-Link DIR-862L User ManualSection 6 - Troubleshooting Configure your Internet settings:

Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?

If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. 135 D-Link DIR-862L User ManualSection 6 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?

If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:

ping [url] [-f] [-l] [MTU value]

Example: ping yahoo.com -f -l 1472 136 D-Link DIR-862L User ManualSection 6 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:

Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual Configure. To change the MTU enter the number in the MTU field and click Save Settings to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. 137 D-Link DIR-862L User ManualSection 6 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. 138 D-Link DIR-862L User ManualAppendix A - Wireless Basics What is Wireless?

People use wireless or Wi-Fi technology as a way of connecting your computer to a network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?

Overall, D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?

Phones that connect wirelessly to a base station work like wireless does, using radio signals to transmit data from point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) Every local area network needs a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. 139 D-Link DIR-862L User ManualAppendix A - Wireless Basics Wireless Personal Area Network (WPAN) Range for Bluetooth (WPAN industry standard) is up to 30 feet away and eliminates the need for many cables. Only WLAN has the speed and wireless operation range suitable for computers transmitting large amounts of data, but WPAN doesnt use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?

Customers and employees, students and teachers, family members; everyone uses wireless. It has become so popular in recent years that almost everyone is using it. Whether its for home or office, D-Link has a wireless solution for it. Home Kids wont trip over cables Email, surf, chat, game, etc... The only way to connect with new devices such as phones and tablets Freedom to move from room to room Instant access for visitors with guest networks Stay on top of everything at home as you would at the office Trim purchasing and maintenance costs associated with cables 32 or even more connections so everyone can get online Small Office and Home Office 140 D-Link DIR-862L User ManualAppendix A - Wireless Basics Where is wireless used?

Wireless technology is expanding everywhere, not just at home or in the office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connections in public places are usually called hotspots. Using a Wi-Fi enabled laptop, you can access a hotspot to connect to the Internet from remote locations like airports, hotels, coffee shops, libraries, restaurants, and convention centers. A wireless network is easy to setup, but if youre installing one for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal and extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This will significantly reduce any interference that the appliances might cause since they operate on same frequency. 141 D-Link DIR-862L User ManualAppendix A - Wireless Basics Security Dont let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Wireless Modes There are basically two modes of networking:

Infrastructure All wireless clients will connect to an access point or wireless router. Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as Wi-Fi enabled laptops. All the adapters must be in Ad-Hoc mode to communicate. 142 D-Link DIR-862L User ManualAppendix A - Wireless Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. 143 D-Link DIR-862L User ManualAppendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1 Windows 7 -

Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows XP -

Windows 2000 - From the desktop, right-click My Network Places > Properties. Connections. Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (e.g. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. 144 D-Link DIR-862L User ManualAppendix B - Networking Basics Technical Specifications LAN Interface: Four 10/100/1000 Gigabit LAN ports Hardware Specifications WAN Interface: 10/100/1000 Gigabit WAN port Wireless Interface (2.4 GHz): IEEE 802.11b/g/n Wireless Interface (5 GHz): IEEE 802.11a/n/ac USB Interface: USB 2.0 Compliant Operating Voltage Output: DC12V, 2A Input: 100~240V (20%), 50~60Hz Temperature Operating: 32 ~ 104oF (0 ~ 40oC) Non-Operating: -4 ~ 149oF (-20 ~ 65oC) Humidity Operating: 10% - 90% non-condensing Non-Operating: 5% - 95% non-condesing Standards IEEE 802.11ac (draft) IEEE 802.11n IEEE 802.11g IEEE 802.11b IEEE 802.11a IEEE 802.3 IEEE 802.3u Wireless Bandwidth Rate IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps IEEE 802.11b: 11, 5.5, 2, and 1 Mbps IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps IEEE 802.11n: 6.5 to 450 Mbps IEEE 802.11ac: 6.5 to 1299.9 Mbps Antenna Type Six Internal Antennas (Three 2.4 GHz Antennas, Three 5 GHz Antennas) Wireless Security 64/128bit WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise, WPS

(PIN & PBC) FCC, IC Wi-Fi / WPS IPv6 Ready WIN 8 FCC, IC cUL Certifications Wi-Fi / WPS IPv6 Ready WIN 8 145 D-Link DIR-862L User ManualAppendix C - Technical Specifications Federal Communication Commission Interference Statement

-

-

-

to which the receiver is connected.

-

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. 146 D-Link DIR-862L User ManualAppendix D - Compliance Statements Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. 147 D-Link DIR-862L User ManualAppendix D - Compliance Statements