| submitted | available | document details (if available) | source link |
|---|---|---|---|
| untitled Acrobat Distiller 8.1.0 (Windows) |
| various | User Manual | Users Manual | 2.34 MiB |
Wireless 802.11ac Dual Band USB Adapter Table of Contents Table of Contents Product Overview ..............................................................3 Package Contents ......................................................................... 3 System Requirements ................................................................. 3 Introduction ................................................................................... 4 Features ............................................................................................ 5 Hardware Overview ..................................................................... 6 Installation .........................................................................7 Getting Started .............................................................................. 7 Remove Existing Installations .......................................... 7 Disable Other Wireless Adapters ..................................... 8 Wireless Installation Considerations ....................................10 Adapter Installation ...................................................................11 Configuration ...................................................................17 D-Link Wireless Connection Manager .................................17 Wireless Networks ..............................................................18 Wi-Fi Protected Setup (WPS) .........................................19 My Wireless Networks .......................................................23 Add Profile .......................................................................24 Modify Profile .................................................................25 Support ..................................................................................26 About ......................................................................................27 Connect to a Wireless Network .......................................28 Windows 7 ...................................................................................28 Windows XP ................................................................................29 Wireless Security .............................................................30 What is WPA? ..............................................................................30 Configure WPA/WPA2-Personal .............................................31 Using the D-Link Wireless Connection Manager .....31 Windows 7 ...........................................................................33 Windows XP ........................................................................36 Configure WPA/WPA2-Enterprise .........................................38 Troubleshooting ..............................................................39 Windows 7 Troubleshooting ................................................42 Wireless Basics .................................................................44 Wireless Modes ............................................................................48 Networking Basics ...........................................................49 Check your IP address ...............................................................49 Windows XP Users ............................................................49 Windows 7 Users ...............................................................49 Statically Assign an IP Address ..............................................50 Windows XP Users ............................................................50 Windows 7 Users ...............................................................51 Technical Specifications ..................................................52 Contacting Technical Support ........................................53 Warranty ...........................................................................54 Registration .....................................................................60 D-Link DWA-182 User Manual 2 Section 1 - Product Overview Product Overview Package Contents D-Link DWA-182 Wireless 802.11ac Dual Band USB Adapter Cradle CD with drivers and software System Requirements
D-Link DWA-182 User Manual 3 Section 1 - Product Overview Introduction The Wireless AC1200 Dual Band USB Adapter (DWA-182) delivers powerful wireless AC technology to your desktop or notebook computer. Simply
Interference-Free Bandwidth
Easy WPS Push Button Setup
connect!
Compatible With All Your Wireless Products
What is wireless AC?
with all of your current Wireless N products.
D-Link DWA-182 User Manual 4 Section 1 - Product Overview Features
D-Link DWA-182 User Manual 5 Section 1 - Product Overview Hardware Overview 1 2 1 2 WPS Button Press the WPS button to automatically connect to a WPS-enabled wireless router or access point and establish connectivity. Refer to page 19. USB Connector Used to connect the DWA-182 to your computer. D-Link DWA-182 User Manual 6 Section 2 - Installation Installation
Getting Started
Remove Existing Installations
utilities are not set to load when your computer boots up. Windows 7 and XP users may use the built-in wireless utility for all adapters.
Start > Control Panel > Uninstall Programs. D-Link DWA-182 User Manual 7 Section 2 - Installation Disable Other Wireless Adapters
the wireless adapter (as well as any unused Ethernet adapters).
My Computer icon and select Properties. Click the Hardware tab and then click Device Manager. Scroll down the list and click the
+ sign to the left of Network Adapters. Right-click the adapter you would like to disable and select Disable. D-Link DWA-182 User Manual 8 Section 2 - Installation Click Yes to disable the adapter.
Disabling the adapter will not remove the drivers. If you would like to use the
Enable. D-Link DWA-182 User Manual 9 Section 2 - Installation Wireless Installation Considerations The D-Link wireless adapter lets you access your network using a wireless connection from virtually anywhere within the operating range of your
1. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a minimum - each wall or ceiling
almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DWA-182 User Manual 10 Section 2 - Installation Adapter Installation Warning: Do NOT install the DWA-182 adapter into your computer before installing the driver software from the D-Link CD. Turn on the computer and Insert the D-Link DWA-182 Driver CD in the CD-ROM drive.
Start > Run. In the run box type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive).
Install. Select the language you want to use and click Next to continue. D-Link DWA-182 User Manual 11 Section 2 - Installation The welcome window will appear. Click Next to continue.
C:\Program Files\D-Link\DWA-182
click Browse Next. Select the Program Files folder location and click Next. D-Link DWA-182 User Manual 12 Section 2 - Installation
Install this driver software anyway to continue. Insert the adapter into an available USB port on your computer. Click Next to continue. If the Found New Hardware WizardCancel. The drivers and software will now install. Please allow 1-2 minutes for this process to finish.
following instructions will connect you to a wireless network using Wi-Fi Protected Setup (WPS). Click Next to continue. D-Link DWA-182 User Manual 13 Section 2 - Installation Push Button Configuration (PBC)
click the virtual button as shown in the screenshot. Note: You may also connect to your network by pressing the WPS button on the adapter and holding for two seconds until the wizard screen comes up. Then, press the WPS button on the router/access point to continue. Press the WPS button on your access point or wireless router within 2 minutes to establish connectivity. Note: Some d evices may require you to launch WPS from software or a web interface. Please refer to your router or access points user manual for more information.
network. Click Next to complete your setup. D-Link DWA-182 User Manual 14 Section 2 - Installation
Manually type your Network Name (SSID) and then click Next.
will automatically be brought to the site survey page. Click Scan to display the site survey page. Click the Scan button to display a list of wireless networks (site survey). Click on the network name (SSID) and click Next. D-Link DWA-182 User Manual 15 Section 2 - Installation
network. Click Next to complete your setup. Click Finish Yes, I want to restart my computer now. D-Link DWA-182 User Manual 16 Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless adapter using the D-Link Utility as well as Windows wireless utility. D-Link Wireless Connection Manager The D-Link DWA-182 uses the Wireless Connection Manager as the management software. The manager provides the user an easy interface to change any settings related to the wireless adapter. Clicking on the Wireless Connection Manager icon on the desktop will start the Configuration.
Double-click the Wireless Connection Manager icon on your desktop. D-Link DWA-182 User Manual 17 Section 3 - Configuration Wireless Networks
the wireless network (SSID) and click Connect. SSID:
The SSID (Service Set Identifier) is the name of the wireless network. MAC:
Displays the MAC address of the wireless device. Signal:
Displays the Link Quality of the wireless connection. Security:
network is secure. You must know the encryption key/security settings to connect. Channel:
Displays the channel of the wireless network. WPS Button:
Connect to a wireless network using Wi-Fi Protected Setup. Refer to the next page. Refresh Button:
Rescans for available wireless networks in your area. Connect Button:
Highlight a wireless network and click the Connect
will appear. Enter the security information to connect (refer to the Wireless Security section for more information). Activate Button:
Select a wireless network profile from the drop-down menu and click Activate to connect. Allow up to 30 seconds to connect. D-Link DWA-182 User Manual 18 Section 3 - Configuration Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) System is designed for easy setup of security-enabled Wi-Fi networks. It is recommended to have the access point or wireless router nearby during setup.
www.wi-fi.org. Push Button Configuration (PBC) is a virtual button in the utility that connects you to other WPS-enabled devices. A connection can be
button on the access point or wireless router within 120 seconds. Refer to page 14. Note: You may also use the physical button on the DWA-182 instead of using the D-Link software. Refer to the next page. Personal Identification Number (PIN) is a unique number generated
utility of the WPS-enabled wireless router or access point connects you with the intended wireless network. Refer to page 22 for more information. D-Link DWA-182 User Manual 19 Section 3 - Configuration Push Button
2. Press the WPS button located on your access point or router to continue. This screen will appear once you have successfully established connection with your network. D-Link DWA-182 User Manual 20 Section 3 - Configuration Personal Identification Number (PIN)
Next. Make sure your access point or wireless router is close by. Write down the number on the screen. Enter this number in your access point or wireless router. Please
Once you click Next point or wireless router. D-Link DWA-182 User Manual 21 Section 3 - Configuration The adapter will try to establish connectivity to your access point or wireless router.
Finish to complete your setup. D-Link DWA-182 User Manual 22 Section 3 - Configuration My Wireless Networks
Wireless Networks New Button:
Click New to create a new wireless network profile
(refer to page 24). Modify:
Click Modify to edit a current profile (refer to page 25). Delete:
Click Delete to remove a profile. Activate:
Click Activate to use a profile. Allow up to 30 seconds to connect to the wireless network. Profile Details:
The Profile Details section will display information about the wireless network such as the network name
is secured. D-Link DWA-182 User Manual 23 Section 3 - Configuration You may add a new network by clicking the New button from the My Wireless Networks page. Add Profile Profile Name:
SSID:
Enter the SSID of the wireless network. Network Type:
Select the network type. If you are connecting to a
Infrastructure. Set Security Option:
Select the type of security used. Please refer to the Wireless Security section for more information. OK Button:
Click OK to save your settings. D-Link DWA-182 User Manual 24 Section 3 - Configuration Modify Profile You may edit an existing profile by selecting the profile and clicking the Modify button from the My Wireless Networks page. Profile Name:
SSID:
Displays the SSID of the network. Network Type:
Displays the network type. Set Security Option:
Select the type of security used. Please refer to the Wireless Security section for more information. OK Button:
Click OK to save your settings. D-Link DWA-182 User Manual 25 Section 3 - Configuration Support
Support button. A panel will appear to the right of the utility which will display information about the utility. D-Link DWA-182 User Manual 26 Section 3 - Configuration About
D-Link DWA-182 User Manual 27 Section 3 - Configuration Connect to a Wireless Network Windows 7 If you receive the Wireless Networks Detected the bubble to access the utility. or Left-click the wireless icon in your system tray (lower-right corner next to the time). The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.
settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWA-182 User Manual 28 Section 3 - Configuration Windows XP If you receive the Wireless Networks Detected the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.
for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWA-182 User Manual 29 Section 4 - Wireless Security Wireless Security
What is WPA?
WPA
is based on 802.11i and uses Advanced Encryption Standard instead of TKIP.
WPA/WPA2-Personal uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2-Enterprise incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public
D-Link DWA-182 User Manual 30 Section 4 - Wireless Security Configure WPA/WPA2-Personal Using the D-Link Wireless Connection Manager
1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect.
will appear. 3. Enter the WPA/WPA2-Personal passphrase exactly as it is on your wireless router or access point. Click the Show text in the password field box to see the passphrase. Unchecking it will hide it. 4. Click OK to connect to the network. Allow up to 30 seconds to connect.
to the next page. D-Link DWA-182 User Manual 31 Section 4 - Wireless Security It is recommended to enable WPA/WPA2-Personal on your wireless router or access point before configuring your wireless adapter. Make sure you enter the passphrase exactly the same on all wireless devices. 1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to create a new profile or highlight an existing profile and click Modify. 2. Select WPA/WPA2-Personal under Set Security Option. 3. Select TKIPAES, or Auto. 4. Enter the passphrase exactly as it is on your wireless router or access point. 5. Click OK to connect to the network. Allow up to 30 seconds to connect. D-Link DWA-182 User Manual 32 Section 3 - Configuration Configure WPA/WPA2 Passphrase Windows 7 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If
1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. D-Link DWA-182 User Manual 33 Section 3 - Configuration 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button.
settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DWA-182 User Manual 34 Section 3 - Configuration 5. Enter the same security key or passphrase that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection
must be exactly the same as on the wireless router. D-Link DWA-182 User Manual 35 Section 4 - Wireless Security Windows XP
1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWA-182 User Manual 36 Section 4 - Wireless Security 3. The Wireless Network Connection box will appear. Enter the WPA/WPA2-Personal passphrase and click Connect.
please verify that the WPA/WPA2-Personal settings are correct. The WPA/WPA2-Personal passphrase must be exactly the same as on the wireless router or access point. D-Link DWA-182 User Manual 37 Section 4 - Wireless Security Configure WPA/WPA2-Enterprise Using the D-Link Wireless Connection Manager WPA/WPA2-Enterprise is for advanced users who are familiar with using a RADIUS server and setting up certificates. 1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to create a new profile or highlight an existing profile and click Modify. 2. Select WPA/WPA2-Enterprise under Set Security Option and then select AutoTKIP or AES. 3. Under EAP TypeEAP-TLS or PEAP. Extensible Authentication Protocols allow devices on the network to request authentication from the RADIUS server in the network. All the devices on the network must use the same EAP type when using a RADIUS server for authentication. Some
server requires validation. 4. Click OK to save your settings. D-Link DWA-182 User Manual 38 Section 5 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWA-182. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows computer will look similar to the following examples.) 1. How do I know if my adapter is installed properly?
Go to Start > My Computer > Properties. Select the Hardware Tab, then select Device Manager. D-Link DWA-182 User Manual 39 Section 5 - Troubleshooting Click the + sign next to Network Adapters. Right-click on D-Link DWA-182 Wireless AC Dual Band USB Adapter. Select Properties to check that the drivers are installed properly. D-Link DWA-182 Wireless AC Dual Band USB Adapter Look under Device Status to check that the device is working properly. Click OK to continue. D-Link DWA-182 Xtreme N Dual Band USB Adapter D-Link DWA-182 User Manual 40 Section 5 - Troubleshooting 2. The computer does not recognize the DWA-182 Wireless Adapter.
previously loaded and reinstall the drivers/software. 3. The computer with the DWA-182 installed is unable to connect to the wireless network and/or the Internet.
broadband connection.
are firmly connected.
InfrastructureService Set Identifier (SSID) is specified on the settings for the wireless clients and
SSID factory setting for D-Link products is blank. (Double-click on the WLAN icon in the taskbar. The Link Info screen will display the SSID setting.) Check that the Network Connection for the wireless client is configured properly. Select AP (Infrastructure) when connecting to an access point. Double-click on the WLAN icon in the taskbar > click on Configuration to change the settings for the wireless adapter. If SecurityWLAN icon in the taskbar > click Encryption. Check to see that the key selected is set to the same key as other devices on the network. D-Link DWA-182 User Manual 41 Section 5 - Troubleshooting Windows 7 Troubleshooting Go to Start > right-click Computer > Properties. Select the Device Manager. D-Link DWA-182 User Manual 42 Section 5 - Troubleshooting Click the + sign next to Network Adapters. Right-click on D-Link DWA-182 Wireless Desktop Adapter. Select Properties to check that the drivers are installed properly. Look under Device Status to check that the device is working properly. Click OK to continue. D-Link DWA-182 User Manual 43 Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless
fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DWA-182 User Manual 44 Appendix A - Wireless Basics What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
Why D-Link Wireless?
How does wireless work?
technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able
Personal Area Network (WPAN). Wireless Local Area Network (WLAN)
can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing
Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.
that operate on batteries. D-Link DWA-182 User Manual 45 Appendix A - Wireless Basics Who uses wireless?
Home
Small Office and Home Office
D-Link DWA-182 User Manual 46 Appendix A - Wireless Basics Where is wireless used?
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots.
Tips
Centralize your router or Access Point
Eliminate Interference
point. This can significantly reduce any interference that the appliances might cause since they operate on the same frequency. Security
WPA/WPA2 security features on the router. Refer to the product manual for detailed information on how to set it up. D-Link DWA-182 User Manual 47 Appendix A - Wireless Basics Wireless Modes
Infrastructure
Ad-Hoc computer.
point.
D-Link DWA-182 User Manual 48 Appendix B - Networking Basics Networking Basics Check your IP address
Windows XP Users
Start > Run. In the run box type cmd and click OK.
ipconfig and press Enter.
Windows 7 Users
Start > All Programs > Accessories > Command Prompt. You may need administrative access to run this application.
YesOKContinue.
ipconfig and press Enter.
block a DHCP request on newly installed adapters. D-Link DWA-182 User Manual 49 Appendix B - Networking Basics Statically Assign an IP Address
Windows XP Users
Windows XP - Click on Start > Control Panel
Local Area Connection which represents your D-Link wireless network adapter (or other adapter) which will be connected to your router.
Internet Protocol (TCP/IP) and click Properties.
Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router. Example: X is a number between 2 and 99. Make sure that the number you choose is not in use on the network.
Default Gateway the same as the LAN IP address of your router or gateway.
Primary DNS the same as the LAN IP address of your router or gateway.
Secondary DNS is optional (you may enter a DNS server from your ISP).
OK to save your settings. D-Link DWA-182 User Manual 50 Appendix B - Networking Basics Windows 7 Users
Start > Control PanelNetwork and Sharing Center icon. If you are using
Manage network connections Change adapter settings.
Local Area Connection which represents your D-Link wireless network adapter which will be connected to your network.
Internet Protocol Version 4 (TCP /IPv4) and click Properties.
Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router or network. Example: 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network.
Default Gateway the same as the LAN IP address of your router or gateway.
Primary DNS the same as the LAN IP address of your router or gateway.
Secondary DNS is optional (you may enter a DNS server from your ISP).
OK to save your settings. D-Link DWA-182 User Manual 51 Appendix C - Technical Specifications Standards
Bus Type
Security
Current Consumption (802.11n)
Technical Specifications Dimensions
Weight
Certifications
Warranty
Operating Voltage
Operating Temperature
Operating Humidity
D-Link DWA-182 User Manual 52 Appendix D - Contacting Technical Support Contacting Technical Support
You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. For customers within the United States:
For customers within Canada:
Phone Support:
(877) 453-5465 Internet Support:
Phone Support:
(800) 361-5265 Internet Support:
D-Link DWA-182 User Manual 53 Appendix E - Warranty Warranty
Limited Warranty:
D-Link warrants that the hardware portion of the D-Link product described below (Hardware) will be free from material defects in workmanship
as otherwise stated herein.
reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
shall become the property of D-Link upon replacement or refund. D-Link DWA-182 User Manual 54 Appendix E - Warranty Limited Software Warranty:
specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise
for which a refund is given automatically terminates. Non-Applicability of Warranty:
Submitting A Claim:
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and th
copy of the dated purchase invoice for the product) if the product is not registered.
Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DWA-182 User Manual 55 Appendix E - Warranty
USA residents are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common
we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are
Canadian residents not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link
What Is Not Covered:
or the liquidators expressly disclaim their warranty obligation pertaining to the product.
Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty. D-Link DWA-182 User Manual 56 Appendix E - Warranty Disclaimer of Other Warranties:
PURCHASER OF THE PRODUCT. Limitation of Liability:
OR STATUTORY. Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or
Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state. Trademarks:
respective owners. Copyright Statement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any
D-Link DWA-182 User Manual 57 Appendix E - Warranty Federal Communication Commission Interference Statement:
FCC Caution: operate this equipment.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
IMPORTANT NOTE:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific
antenna or transmitter.
USB slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule an such use shall be prohibited. D-Link DWA-182 User Manual 58 Appendix E - Warranty Industry Canada statement
1) this device may not cause interference and
Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable.
Avertissement: les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
IMPORTANT NOTE:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating
instruction as documented in this manual. Dclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. .Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
5.25 ~ 5.35GHz D-Link DWA-182 User Manual 59 Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Link DWA-182 User Manual 60
This product uses the FCC Data API but is not endorsed or certified by the FCC