Scanning and Imaging Imager Data Capture LINEAR BARCODE 2D MATRIX SYMBOL Relative Size and Location of Aiming System Pattern You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on a computer. The Memor 10 may get warm during charging. This is normal and does not mean a malfunction. For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to the Quick Start Guide included in the dock's box. Use only the Datalogic power supply 94ACC0196 to power the Memor 10. Charge with the Dock Insert the device into the dock with the screen facing front and the head facing up. 4. Replace the battery (see Battery Installation). Use only the Datalogic power supply 94ACC0197 to power any of the docks. 4. Replace the battery (see Battery Installation).