WWAN 3G module Users Manual

Datalogic S.r.l. Via S. Vitalino, 13 40012 Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147205 2016-2017 Datalogic S.p.A. and/or its affiliates An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic S.r.l. or its subsidiaries or affiliates. Owners of Datalogic prod-

ucts are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website

(www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic"

page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. DL-Axist is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. See www.patents.datalogic.com for patent list. Patents Reference Documentation For further information regarding DL-Axist refer to the SDK Help on-

line, to the DL-Axist Quick Reference Guide and to the DL-Axist Users Manual, downloadable from our website www.datalogic.com. Service and Support Datalogic provides several services as well as technical support through its website. Please check our website at www.datalogic.com. under Support & Services, then Automatic Data Capture, and click on the links indicated for further information including:

Downloads Manuals for the latest versions of user manuals and product guides. Software & Utilities for the latest firmware release for your product. You can also click on the following link for direct access to this section: www.datalogic.com/products_up-

dates. Service Program for warranty extensions and maintenance agreements. Repair Centers for a list of authorized repair centers. Technical Support Automatic Data Capture email form to contact our technical support. Warranty Terms and Conditions The warranty period is 1 year for the device and 90 days for consum-

ables (e.g. battery, power supply, cable etc.) from date of purchase at our company. Out of the Box Back View Speaker Battery Latch Battery Door The DL-Axist package contains:

DL-Axist (device) Rechargeable battery USB charge/communication cable Battery Box (for spare battery) Quick Start Guide Safety & Regulatory Addendum EULA sheet Remove all the components from their packaging; check their integrity and compare them with all the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION General View Front View Logo

(Notifications/

Good Read Indicator) Charging LED Touch Panel Display Side View Right Trigger Function Key Power Button Back Button Menu Button Home Button Scan Key Top View Bottom View LED Flash Color Camera Battery Latch Memory Card Socket SIM Card Socket Left Trigger Volume Control Buttons Micro USB Port Personal Digital Assistant (PDA) For WiFi and WWAN Versions Quick Start Guide 822001882 (Rev. A) Jan. 2017 See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information. 2016-2017 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trade-

marks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. www.datalogic.com Audio Jack Dock Contacts Data Capture Window Battery Installation To install the battery pack, follow the steps below:

1. Rotate the latches to the open position. Grab the battery cover by the sides and lift it out of the way:

Charging Instructions The battery pack is not initially fully charged. After installing the bat-

tery, charge it with the USB cable or with the single dock. Charge the battery for a minumum of 4 hours for the standard battery and 8 hours for the extended battery. NOTE Charge with USB You can use the provided USB charge/communication cable in conjunction with the power supply adapter (p/n 94ACC0135) to charge the terminal from a power outlet. SD Card / SIM Card Installation 1. Turn off the DL-Axist or put it in swap battery mode (refer to the User's Manual for more details). 2. Remove the battery cover (see Battery Installation, step 1) 3. Remove the battery pack by pulling the tab on the bottom of the battery. Lift the retaining door:

2. Remove the battery pack from the battery box1. Insert the battery pack into the slot, top (contacts) side first, and press it into place:

4. Slide the microSD card/SIM card holder to the left to unlock it. 3. Insert the battery cover, bottom first, and press it into place. Rotate the latches to the lock position to lock the cover:

NOTE Use only a Datalogic approved power supply. MicroSd Card SIM Card 5. Lift the holder:

Charge with the Dock MicroSD Card SIM Card 4. Press and release the power button to turn the DL-Axist on. 6. Insert the microSD card/SIM card into the holder. Make sure the contacts side is face down. 1. Always use the battery box to carry the battery pack. Do not put the battery pack in your pocket. MicroSD Card SIM Card 7. Close the holder and shift it to the right to lock it:

MicroSD Card SIM Card 8. Close the retaining door. 9. 10. Insert the battery cover (see Battery Installation, step 3). Insert the battery pack into the slot. Scanning and Imaging Imager Data Capture To scan a barcode symbol:

1. Point the scan window at the barcode. 2. Tap Scan on the screen or press one of the scan buttons on the DL-Axist. The imager projects a laser aiming pattern similar to those used on cameras. The aiming pattern is used to position the barcode or object within the field of view. 3. Center the symbol in any orientation within the aiming pattern. Ensure the entire symbol is within the rectangular area formed by the brackets in the aiming pattern, then either wait for the timeout or release the scan key to capture the image. A red beam illuminates the symbol, which is captured and decoded. Aiming System Pattern Linear Bar Code 2D Matrix Symbol If the scan has been successful:

If enabled, the good read LED glows steadily green for a configurable time. If enabled, the good read beep plays. The barcode type and content data display on the screen.