Control Unit 258-2 User Manual

Control unit 300 Series mounting + operating 1 Overview This control unit is designated to operate an electrically driven bed with optional comfort functions. Power supply is provided via SMPS so the control box has protection class III. The system is operated with an RF remote. The RF receiver is integrated into the control unit. Bed view from beneath Massage motor 1 2 Actuator 1 Actuator 2 Control unit Massage motor 2 Here for example you can see a control unit with two actuators and two massage motors connected October 31, 2012 Page 2 of 10 Control Unit 258-2 CU258-2 2 Mounting the control unit This mounting bracket is fixed on the flipside of the bed These two bolts fix the position of the control unit between the mounting bracket. The clip snaps in the holding fixtures of the control unit October 31, 2012 Page 3 of 10 October 31, 2012 Page 4 of 10 2/18 min. or 10 %, max, 5 switching cycles per minute 29 V / 6A black RAL 9005 ABS + PC drives: 2 actuators / 2 vibration motors power input 1 / multifunction output 1 Reset + pairing button / Pairing LED for RF Power LED IP20 III 30% - 75%

+50F - +104F external Performance data control unit Duty cycle Output voltage Further features Housing colour Housing material Ports Indicators + buttons Protection type Protection class Relative humidity Ambient temperature Power supply Integrated RF receiver 1 Key Function 1 Pairing enable Performance data RF receiver modulation Frequency Range Transmitted Power Battery Working Current Standby Current Ambient Temperature GFSK 2.403~2.480GHz 0 dBm 30V supply voltage

<60mA

<20mA

-4085 PCB Material & Size FR4 1.6mm 120*120mm October 31, 2012 Page 5 of 10 2.1 Power supply PD12 65444 Connecting cable73178 to control box Power supply cable 3.00.401.151.30 to mains power Performance data Output voltage Components Indicators Colour Further data Protection type Protection class Relative humidity Ambient temperature Power supply Safety 29 V DC constant voltage output LED operating status indication (green) black RAL 9005 IP20 II 30% - 75%

+50F - +104F wide input voltage range 100-240 V AC NTC temperature sensor, primary fuse, overload protection, overcurrent switch-off, short-circuit-proof output October 31, 2012 Page 6 of 10 Remote Control 258B 2.2 RF258B Frontside 1 2 3 4 5 6 7 8 9 10 11 12 Pairing button

& battery box

(flipside) Insert 3x AAA 13 Keys for fixed positions Choose between comfortable positions Manual adjustment keys Move head & foot rest up and down manually Massage keys

With the timer key you program duration and stop the massage function. The LEDs signal the programmed duration, the massage. With the Head & Foot keys you can select the massage zones. the key below starts Start both Massage (Head and Foot) Function Adjust Massage timer Key 1 Massage Head ON 2 3 Massage Foot ON 4 Move bed in TV position 5 6 Move bed in Lounge position 7 8 Move bed in Flat position 9 Relay 3 on 10 Relay 2 on 11 Move bed in Zero G position 12 Relay 4 on Relay 1 on 13 Pairing October 31, 2012 Page 7 of 10 Performance data remote

(RF transmitter) Modulation Frequency Range Battery Working Current Standby Current Ambient Temperature GFSK 2.403~2.480GHz AAA

<40mA

<8uA

-4085 RC Dimension PCB Material & Size Housing Material 145*50*14mm FR4 1.6mm 79*42mm ABS+PC October 31, 2012 Page 8 of 10 3 Board Schematics (remote) 3.1 Remote 3.2 RX module Pls insert diagram _ October 31, 2012 Page 9 of 10 4 Functional Description Take cable 3.00.401.151.30 and connect it to mains supply. The system is delivered paired!

You can test the functions of the system with the RF remote. Pairing instruction (in case of trouble) Pairing the remote with the control box. The distance between remote and control box for pairing should be less than 2 meters!

1. Remove the battery cover on the flipside of the remote. 2. 3. Push the reset button on the control box twice with something spiky. Insert/check existing 3x AAA batteries. The green pairing LED adjoining is lit. Now you have 10 s to pair remote and receiver. 4. On the flipside of the remote is a silicone push button positioned above the batteries

(13). A blue LED starts blinking as the button is pressed. Keep it pressed until the blue LED is lit continuously, then pairing is completed, the blue LED light fades away. This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

RSS-102 Statement: This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Dclaration CNR-102: Cet quipement est conforme l'exposition aux rayonnements Industry Canada limites tablies pour un environnement non contrl. October 31, 2012 Page 10 of 10 FCC Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.