1 Product Introduction 3 Switch on and off 4 Open tripod operation instructions Handheld gimbal Bracket handle remote controller
/
Power button /
Camera button tripod bracket 2 SEAJIC Fix the mobile phone to the mobile phone bracket, press the camera button for 2 seconds long until the green light flash on, Bluetooth pairingmode; Turn on the Bluetooth settings on the mobile phone, search for and connect to the
"SEAJIC" then the green light open; you can press the camera button on selfie stick for taking pictures. Oth-AB202 Handheld gimbal mobile phone bracket Horizontal vertical screen switching retention space Aluminum alloy pull pole Handle sleeve Firstly: hold the Bluetooth remote controller position of the product handle sleeve with the right hand, and lightly take out the tripod bracket from the bottom with the left hand. 6 Horizontal vertical screen switching instructions 7 7 Use the handheld gimbal 9 Notes The product uses the patent of sliding rail for mobile phone bracket to reserve rotating space, it can achieve horizontal vertical screen free switching without moving the mobile phone. 1/4 Align the 1-4-inch standard screw port of the digital product withthe screw port of the product then rotate the digital clockwise to use the product. Micro When battery is low, take out remote controller and charge it through Micro in-
terface. Note: when pulling out the pull pole, the bottom tripod bracket will open automatically at the same time, p-
lease do not open forcibly the bo-
ttom tripod bracket with your hand, avoiding to cause product damage. 2
/
instruction of remote controller separation / charging 2-3cm Secondly: one hand holds the middle position of the selfie stick, the other hand holds the front and back position of the selfie stick mobile phone bracket, and pulls out about 2cm of the mobile phone bracket. 2-3cm 5 Put away the tripod Hold the middle of the selfie pole by one hand, and push the pull pole back into the handle sleeve one by one. Focusing Model Oth-AB202PRO APP Focus as you wish without downloading the App Note: Camera switch button: Short press the front and rear camera for switching (shooting and ph-
otographing switch for some mobile phones) Short press for level 1 zoom in Long press for continuous zoom in Photograph Long press start on/off Short press the front and rear camera for switching Short press for level 1 zoom out Long press for continuous zoom out charging port
:
Take out remote controller take out the remote controller from the bottom of the remote controller
:
Install the remote controller first fix the top of the remote controller, press down into the remote controller Finally: hold the middle of the mobile phone bracket , then pull out all the pull pole. Note: when pushing the pull pole, the tripod will be closed automatically. P-
lease do not put your hand directly on the tripod bracket to prevent clamping injury. Step 6: Use the handheld gimbal 8 Specifications
/Size
/Weight
/Capacity
/Selfie stick size 33x30x214mm 183g 50mAh 214mm
/Selfie stick lever size 720mm(10mm)
/Tripod folding size 214mm
/Tripod unfolding size 800mm(10mm)
/Material
/Aluminum Rod