XO-9566 Bright Bluetooth Speaker Users Manual

Bright Bluetooth Speaker Instruction Manual PowerButton Micro-USB ChargingPort LED Indicator Whatsincluded:

1 x MiniSpeaker 1 x USB to Micro-USB chargingcable 1 x CarryingStrap 1 x Instruction Manual Tech Specifications Input: DC5V/400mA Paring name : Bright. Bluetooth version:4.2+EDR Battery type:Li-Polymer BatteryCapacity:400MAH FCC ID: 2ALCF-XO-9566 Instructions:

1. Charging thespeaker:

a .Using a regulated USB adapter. Connect a USB cable to a USBadapter. Using theMicro-USB connector, connect the other end of the USB cable to the charging port on the speaker. Plug the USB adapter into the outlet to begin charging. The LED will light up in redwhile in charging, turns off when fully charged. b. Using your computer. Connect a USB cable to a USB outlet on your computer. Using the Micro-USB connector, connect the other end of the USB cable to an charging port on the speaker. Make sure the computer is on to begin charging the speaker. Connecting a Media Device:

Press and hold the Power Button to turn speaker ON/OFF. The Blue LED Indicator will flash to indicate pairing mode. Select Bright. on your media device. Power Button Function:

Audio volume and track selection can be made by using the media source device. SAFETY PRECAUTIONS:

WARNINGWhen using this product, basic precautions should always be followed, including the following:

1. Read all the instructions before using the product. 2. Charge the speaker completely before initial use to ensure longevity. 3. If the device does not respond once it is powered on, the battery capacity may be low. 4. Do not over charge the internal battery. 5. Do not immerse in water or expose to moisture or damp weather conditions. 6. Do not drop, knock, or shake. Rough handling can damage the internal precision component and its boards. 7. Do not insert any objects into the speaker/ mic. 8. Keep away from children. Device is not a toy. 9. Keep away from fire or other sources of heat. Exposure to high temperatures may cause it to explode. 10. Do not short-circuit as this may cause damage to the unit. 11. Do not pull the charging cable or over-extend its reach. 12. Unauthorized changes or modifications may void your right to use this product. 13. While using, always comply with any special regulations that may apply to the area you are in and always turn off your mobile device when its use is prohibited. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.