| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 10 2016 | Adobe PDF Library 15.0 |
| various | User manual | Users Manual | 1.77 MiB | / December 10 2016 |
Smart Wi-Fi Outlet Questions or Concerns?
Please contact us: (855) 686-3835 support@etekcity.com Thank You. Thank you for purchasing the Smart Wi-Fi Outlet by Etekcity. Use your home Wi-Fi network to remotely control your lights and appliances with a press of a button. Use the VeSync home automation app on your Android or iOS device in order to schedule actions, keep track of power usage, and turn off your lights and television from several rooms away. Modernize your home and take control. Were constantly working at building better living with the products and services we create. Should you ever experience any issues with your new product, feel free to contact our helpful customer service team toll-free at (855) 686-3835 or by e-mail at support@etekcity.com. Scan here to view the latest digital version of this manual. Due to consistent app updates and improvement, the contents of this manual are subject to change without prior notice. Re-configuring a Device Deleting/Sharing a Device, Logging Out Troubleshooting Customer Support Warranty Specifications 27 28 29 30 31 33 Table of Contents Safety Information iOS Setup & Configuration Setup & Configuration APN Mode Turning Devices ON/OFF Action Schedule Triggered Actions Countdown Action Timer Power History, Action Log, Firmware Update Edit Device Android Setup & Configuration Setup & Configuration APN Mode Turning Devices ON/OFF Action Schedule Triggered Actions Countdown Action Timer Power History, Event Logging, Upgrade Firmware Device Editor 4 5 8 10 11 12 13 14 15 15 16 19 21 22 23 24 25 26 26 restrooms, and any other damp environments. When cleaning, use a dry cloth to wipe the outlets surface. The VeSync home automation app is only compatible with Android 4.0 / iOS 7.0 operating systems and above. The app does not support any phone/tablet. The outlet does not support 2G / 3G / 4G networks for configuration. Before configuration, make sure the wireless network is operating normally in order to avoid adverse effects on the product operation. Safety Information IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage to the product. DO NOT exceed the maximum load current of 10A (approximately 1100W). Always check the electrical power before use to avoid potential damage to the device. DO NOT use for or near space heaters or air conditioning units. Keep out of reach of children. The outlet is for indoor use only. Avoid exposure to high-temperature sources, direct sunlight and moisture. The outlet is best used in areas with good air circulation. To avoid short circuiting, keep the outlet out of direct/indirect contact with water and liquids. DO NOT install the outlet in washrooms, 4 Setup iOS Setup & Configuration NOTE: Before configuration and operation, connect your smartphone/tablet to the Wi-Fi network you wish to operate the device with. 1. Download and install the VeSync app to your device by searching Vesync app in the App Store, or by scanning the QR code below. 2. Plug the smart outlet into a powered socket or power strip. A solid blue light will appear. 3. Once downloaded, open the VeSync app. Tap Sign Up to create an account. Enter your User ID and password and tap Sign In. App Store 5 NOTE: If a blue light does not appear, follow the re-
configuration steps on page 27. NOTE: Only one account can be created per device. The outlet configuration can be shared to other accounts connected to the same network once the first account has been created. Configuration 1. To begin configuration for the smart outlet, tap the button on the top right corner of the home screen, then tap Start Config. 2. Input your Wi-Fi network ID and password and tap Complete Configuration 6 3. Once configuration is 4. Connect the desired appliance complete, the outlet will appear on the app home screen. to the smart outlet. Keep your appliance ON in order to control it through the VeSync app. NOTE: If configuration fails, retry connection through APN mode. (see pages 8-9) 7 APN Mode (skip to page 10 if your outlet is already configured) 1. While in the configuration menu, tap Use APN. 2. Press and hold the outlet power button for about 10 seconds and release when the LED light starts to slowly blink blue. 3. Tap Next. 8 4. Tap Join ESP WiFi. 5. When at the list of available networks, connect to ESP XXXXXX. Once you are connected, return to the VeSync app. 6. Tap Success and input your Wi-Fi network ID and password, then tap Complete Configuration. Once configuration is complete, the outlet will appear on the app home screen. 9 Operation Turning Devices ON/OFF Method 1:
Method 2:
While at the VeSync app home screen, tap the slider next to the desired outlet to turn it on or off. Tap on the desired outlet name to access outlet control settings. Tap the power button on the center of the screen to turn the device on or off. The device is OFF. The device is ON. The device is offline. The device is online. The device is OFF. The device is ON. 10 Action Schedule Action Schedule lets you schedule and repeat an action such as turning a device on or off on desired days and times. To add a new scheduled action:
Tap the + button on the top right corner of the screen. Tap to set the hours and minutes of the desired actions. Tap to select which days to repeat the action. Turn device ON. Turn device OFF. Tap to confirm your scheduled action. NOTE: While in the Action Schedule menu, use the activation switches to quickly turn on or off a saved action schedule. 11 Triggered Actions You can set a minimum or maximum power that an outlet can accommodate and trigger specific actions, such as switching off an outlet, receiving an email, or notification on your smartphone, when this power setting is exceeded. To add a new triggered action:
Tap the + button on the top right corner of the screen. To set the maximum or minimum power (units in W) of an outlet, tap on the data field next to Max Power or Min Power and a numpad pops up so you can input your desired power rating. Tap Done when youve inputted your desired power rating and configure them/turn off configuration by tapping on the slider button. To select the triggering actions, tap on the slider button located to the right of each triggering action. 12 2. Scroll on the data fields to set the desired countdown for your outlet. When youre finished setting the countdown, tap OK to schedule it. 3. Your outlet will automatically switch off after the countdown ends. Countdown To conserve energy, you can schedule a countdown for an outlet before it automatically turns off. To schedule a countdown:
1. Tap the button on the main screen and a Countdown Timer dialog box will pop up. 13 Action Timer The Action Timer allows you to switch an outlet on/off on a single scheduled date and time. To add a timed action:
Tap the + button on the top right corner of the screen. Tap to give the timed action a name. Tap to confirm your timed action. Tap to set the date of the desired action. Tap to set the time of the desired action. Turn device ON. Turn device OFF. 14 Power History Edit Device Tap Power History to view a devices power consumption. To edit the device name and information, tap More, then tap Edit Device. To change the device icon, tap the current icon, then select what device you are controlling. Device Icon Action Log To see the usage and action history of a device, tap Action Log. Firmware Update To download the latest firmware updates, tap More, then tap Information. 15 Setup Android Setup & Configuration NOTE: Before configuration and operation, connect your smartphone/tablet to the Wi-Fi network you wish to operate the device with. 1. Download and install the VeSync app to your device by searching Vesync app in the Google Play Store, or by scanning the QR code below. 2. Plug the smart outlet into a powered socket or power strip. A solid blue light will appear. 3. Once downloaded, open the VeSync app. Tap Sign Up to create an account. Enter your User ID and password and tap Sign In. Google Play NOTE: If a blue light does not appear, follow the re-
configuration steps on page 27. NOTE: Only one account can be created per device. The outlet configuration can be shared to other accounts connected to the same network once the first account has been created. 16 Configuration 1. To begin configuration for the smart outlet, tap the button on the top right corner of the home screen, then tap Start Config. 2. Input your Wi-Fi network ID and password and tap OK. 17 3. Once configuration is 4. Connect the desired appliance complete, the outlet will appear on the app home screen. to the smart outlet. Keep your appliance ON in order to control it through the VeSync app. NOTE: If configuration fails, retry connection through APN mode. (see pages 19-20). 18 APN Mode (skip to page 21 if your outlet is already configured) 1. While in the configuration menu, tap Use APN. 2. Press and hold the outlet power button for about 10 seconds and release when the LED light starts to slowly blink blue. 3. Tap Next. 19 4. Tap Join Esp Wifi. 5. When at the list of available networks, connect to ESP XXXXXX. Once you are connected, tap or press your phones back button to return to the VeSync app. 6. Tap Confirm and input your Wi-Fi network ID and password, then tap OK. Once configuration is complete, the outlet will appear on the app home screen. 20 Operation Turning Devices ON/OFF Method 1:
Method 2:
While at the VeSync app home screen, tap the slider next to the desired outlet to turn it on or off. Tap on the desired outlet name to access outlet control settings. Tap the power button on the center of the screen to turn the device on or off. The device is OFF. The device is ON. The device is offline. The device is online. The device is OFF. The device is ON. 21 Action Schedule Action Schedule lets you schedule and repeat an action such as turning a device on or off on desired days and times. Tap to set the hours and minutes of the desired actions. To add a new scheduled action:
Tap the + button on the top right corner of the screen. Select which days to repeat the action. Turn device ON. Turn device OFF. Repeat action everyday from sunrise to sunset
(05:59AM to 08:06PM). Tap to confirm your scheduled action. NOTE: While in the Action Schedule menu, use the activation switches to quickly turn on or off a saved action schedule. 22 To set the maximum or minimum power (units in W) of an outlet, tap on the data field next to Max Power or Min Power and a numpad pops up so you can input your desired power rating. Tap Done when youve inputted your desired power rating and configure them/turn off configuration by tapping on the slider button. To select the triggering actions, tap on the slider button located to the right of each triggering action. Triggered Actions You can set a minimum or maximum power that an outlet can accommodate and trigger specific actions, such as switching off an outlet, receiving an email, or notification on your smartphone, when this power setting is exceeded. To add a new triggered action:
Tap the + button on the top right corner of the screen. 23 2. Tap on the Minute and 3. Your outlet will automatically Second data fields to set the desired countdown for your outlet. When youre finished setting the countdown, tap on Confirm to schedule it. switch off after the countdown ends. Countdown To conserve energy, you can schedule a countdown for an outlet before it automatically turns off. To schedule a countdown:
1. Tap the button on the main screen and a Countdown Setting dialog box will pop up. 24 Action Timer The Action Timer allows you to switch an outlet on/off on a single scheduled date and time. To add a timed action:
Tap the + button on the top right corner of the screen. Tap to give the timed action a name. Tap to set the date of the desired action. Tap to set the time of the desired action. Turn device ON. Turn device OFF. Tap to confirm your timed action. 25 Power History Device Editor Tap Power History to view a devices power consumption. To edit the device name and information, tap More, then tap Device Editor. To change the device icon, tap Icon, then select what device you are controlling. Event Logging To see the usage and action history of a device, tapEvent Logging. Upgrade Firmware To download the latest firmware updates, tap More, then tap Device Info. Icon 26 Re-configuring a Device 1. Press and hold the outlet power button for about 5 seconds and release when the LED light illuminates with a solid blue light. 2. Tap the + button on the top 3. Input your Wi-Fi network ID right corner of the screen. and password, then tap OK to confirm. Once configuration is complete, the outlet will appear on the app home screen. 27 Deleting a Device Logging Out Share a Device iOS iOS To delete a device, swipe the desired device left, then tap Delete. While in the main menu of the app, tap Settings on the bottom right, then tap Logout. Android Android To delete a device, tap and hold the desired device icon for 3 seconds, then tap Delete. While in the main menu of the app, tap the button on the upper left-hand corner of the screen to log out. Alternatively, you may also tap Settings on the bottom right, then tap Logout. Input another account to share your devices controls and settings. iOS While in the main menu of the app, swipe the desired device left, then tap Share and type in the account name of the person you wish to share the device with. Android While in the main menu of the app, tap and hold the device that you wish to share, then tap Share and type in the account name of the person you wish to share the device with. 28 Troubleshooting Q: Why wont my device respond to my app remote commands?
A: Ensure that your Wi-Fi network is working normally and that the outlet is fully and properly plugged in and connected to a device. Q: Why wont the power usage data update in the app even when my outlet is in use?
A: Sometimes it takes some time for the power usage data to update. If youre using a low power consumption appliance, data may take longer to transfer. Q: Why wont the VeSync app allow me to add a device?
Follow the re-configuration steps on page 29. If the device network was set up by another user, have the primary user Share the device to you so you may configure it to your own smart device. Make sure your devices firmware is updated to the latest version. 29 Make sure the password and account ID youre inputting are correct. Try configuration using APN mode. Remove the outlet from its power supply; wait a few seconds and plug the outlet back in and re-attempt configuration. Q: After adding a device, why wont the device icon appear on the main screen of the VeSync app?
A: Refresh the main menu screen and the device should then normally appear on the screen. Q: After moving an outlet to another socket, its appearing as offline/the light is slowly blinking blue. Why is this happening?
Check to make sure the device isnt placed too far from the network wireless router. It must be within a 164 ft (50m) visible range from the router. Check to make sure the network hasnt changed and is functioning normally. Reset the outlet by pressing and holding the outlet power button for 20 seconds and releasing when the indicator light begins to flash quickly. Then, re-configure the outlet with the network. Customer Support Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours!
Etekcity Corporation 1202 N Miller Street, Suite A Anaheim, CA 92806 Toll-Free:
Fax:
Local:
Email:
Live Chat:
(855) 686-3835
(657) 202-1693
(657) 500-1872 support@etekcity.com www.etekcity.com SUPPORT HOURS Monday - Friday:
9:00am - 5:00pm PST
*Please have your order ID number ready before contacting customer support. 30 Warranty Information Terms & Policy Etekcity warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year, effective from the date of purchase. Warranty lengths may vary between product categories. For specific warranty terms, please refer to your products listing page or operation manual. Under the limited warranty, Etekcity will replace or refund any product found to be defective due to manufacturer flaws based on eligibility. This warranty extends only to personal use and does not extend to any product that has been used for commercial use, rental use, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product. This warranty is non-transferrable. Etekcity is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by 31 user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual. Etekcity and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed above and in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Continued on page 32 Should your product prove defective within the specified warranty period, please return the defective unit in its original packaging with (1) an original copy of invoice, (2) your order number, (3) and your warranty ID number. Date of Purchase:
____________________ Place of Purchase:
____________________ Warranty ID:
____________________ Exceptions & Exclusions Order ID:
____________________ Damage due to abuse, accident, alteration, misuse, tampering or vandalism. Improper or inadequate maintenance. Damage in return transit. Unsupervised use by children under 18 years of age. To receive a valid warranty ID number, sign into your Etekcity customer account at www. etekcity.com (If you ordered your product through Amazon, Ebay or Walmart, create an account at www.etekcity.com in order to retrieve your warranty ID). At the top of the warranty page, type in your order number located in your order invoice to retrieve your warranty ID number. Your warranty ID number will then be sent to your email for your records. If deemed defective, your product will be replaced or refunded at no charge to you. To register your warranty or to make a claim, please contact our helpful customer support team at (855) 686-3835 or email support@
etekcity.com
*Please have your order ID number ready before contacting customer support. Please keep this page for your records. 32 Specifications Communication Mode IEEE802.11b/g/n (Wi-Fi) Communication Frequency 2400 - 2483.5 MHz Wireless Distance
(Outlet to Router) 98 - 164 feet | 30 - 50 meters
(max visible range) Maximum Switch Current 10A AC Power Supply Range &
Supply Frequency 120V, 50/60Hz Rf PA Power 25 dBm 33 Continued on page 34 Power Consumption 0.7 - 1.2 W Operating Environment 14F ~ 104F | -10C ~ 40C Storage & Transportation Environment
-4F ~ 104F | -20C ~ 60C Size 102mm x 62mm x 30mm Compatible Systems Android 4.0 or higher | iOS 7.0 or higher NOTE: Your outlet Wi-Fi signal range may be shortened or adversely affected by one or more of the following: your Wi-Fi network operation power rate, the Wi-Fi sensitivity of the receiving device, thick building walls and surrounding electrical devices. Package Contents 1 x Wi-Fi Remote Outlet 1 x User Manual 34 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Scan here and join the community!
http://www.etekcity.com
This product uses the FCC Data API but is not endorsed or certified by the FCC