EV-7010MWHD 2.4GHz Digital Wireless System User Manual

3.Connection Introduction Pairing Switch GND DC:12-24V GND DC:12-24V 1. Camera pairing switch 2. Camera power supply: DC12-24V input 3. Monitor power supply: DC12-24V input 4.Accessories for camera for monitor 2.4G antenna with 3 meters extension cable 2.4G antenna 2.4G wireless backup camera 4 EV-7010MWHD 105*140mm 2019.03.11 WITE/04/05-445 PAC-20701000-025 Attention......................................................................... 1 Function And Parameter Introduction.............................. 1-2 Product Introduction....................................................... 2-3 Connection Introduction................................................. 4 Accessories.................................................................... 4 Attention For your safety, Do not watch video or set monitor while driving. Non-professional please do not disassemble the product at will, please consult the after-sales service organization when the product malfunctions, or send it to the local maintenance department for inspection and repair. Warning When installing this product, please install it in the position permitted by laws and regulations, and we shall not be responsible for the liability caused by the illegal installation of the product. Tips In cold weather, the product may appear dark screen phenomenon when startup. Which will heat up slowly and return to normal with the increase of temperature. 1.Function And Parameter Introduction Monitor 1. LCD: 7 inch high definition IPS panel 2. Screen ratio: 16: 9 3. Resolution: 1024*RGB*600 4. Panel Button: 7 mechanical keys 5. Wireless video input: 1CH 6. Using digital wireless encryption technology to code connection, strong anti-interference ability 7. 2.4G Wireless transmission distance up to 150m in open area 8. Power supply: DC12V~24V 9. Power consumption: 3W 10.Working temperature: -20~75 11.Storage temperature: -30~80 12.Size: 180* 121* 24mm Camera 1. CMOS: 1/3" sensor 2. Resolution: 1280*720,1 million pixels 3. Viewing angle: 100 degrees 4. Night vision distance: about 6 meters 5. Waterproof rating: IP69 6. 2.4G Wireless transmission distance up to 150m in open area 7. Power supply: DC12V24V 8. Power consumption: 3W 9. Working temperature: -20~60 9. Storage temperature: -10~70 10.Size: 86.5* 74.5* 77mm Menu Setting Press the MENU key on the panel, can open the option of the contrast, saturation and brightness in menu, press or to set the contrast, saturation and brightness of the camera, pictures below:

2.Product Introduction Monitor Introduction 1. 2.4G antenna 2. LCD screen 3. LOGO 4. Brightness Decrease: Reduce the brightness value of the display screen 5. MENU: open or exit the menu 6. Brightness increase: Increase the brightness value of the display screen 7. Power key 8. Flip set: Turn Up/Down/Left /Right 9. Parking guide line 10.Pairing button Flip Setting Press , set UP Down Left and Right quickly Parking Guide Line Press


, set it ON/OFF, picture below:

1 2 3 4 5 6 7 8 9 10 Camera Pairing Camera Introduction 1. 2.4G antenna 2. Night vision infrared light 3. Night vision sensor 4. U-shaped bracket and sun shade 1 2 3 4 Press and hold
on monitor and the camera pairing button to pair the wireless rear view system. It will show a text Successfully Pairing in about 2-5 seconds, or will show Pair fail means failure to pair, needs pair again, picture below:

FCCCaution Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment. Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference toradiocommunications.However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures:

-Reorientorrelocatethereceivingantenna.

-Increasetheseparationbetweentheequipmentandreceiver.

-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected.

-Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith minimumdistance20cmbetweentheradiator&yourbody.