submitted | available | document details (if available) | source link |
---|---|---|---|
August 20 2019 | August 20 2019 | MCD139BT-en(190221) Adobe PDF library 15.00 |
various | UM | Users Manual | 2.60 MiB | August 20 2019 |
Installation Before You Start Consult a qualified technician for instructions. Dual always recommends professional installation. Disconnect negative battery terminal. Remove trim ring from unit (if installed). Remove 2 transit screws located on top of the unit (if applicable). Insert the removal keys, and remove the mounting sleeve from the head unit. XDM290BT Quick Start Guide CD Receiver f o re you e p r i n t hink b t To download the complete, model-specic manual, please visit www.dualav.com/support/manuals.php or call 1-866-382-5476, 9AM-5PM EST (Monday-Friday). Note: Most vehicles require an installation kit, wiring harness and/or antenna adapter (all sold separately) to properly install the head unit in the vehicle. Installation Process 1. Carefully remove the existing head unit. 2. Connect wiring harness. Consult a qualified technician if you are unsure. 3. Mount the head unit using the mounting sleeve or ISO brackets (depending on your vehicles dashboard). 4. Connect wiring harness and antenna. Test the head unit for correct operation. 5. Slide into mounting sleeve to secure, or mount the ISO brackets to the vehicle. 6. Snap trim ring into place. Wiring Connections The chart below the connection for each wire in the wiring harness. Color Red Yellow Black Blue White White/Black Gray Gray/Black Green Green/Black Violet Violet/Black Connection 12V Ignition / Accessory 12V Battery / Memory Ground Power Antenna / Amp Turn-on Left Front (+) Left Front (-) Right Front (+) Right Front (-) Left Rear (+) Left Rear (-) Right Rear (+) Right Rear (-) Tip:
When a suitable ground wire is not present in the vehicle wiring harness, connect the black ground wire to the vehicle chassis. Fuse:
When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. Installation Single DIN Dashboard or Installation Kit Single DIN Dashboard or Installation Kit Mounting Sleeve Mounting Sleeve Mounting Tabs Single DIN Dashboard or Installation Kit Head Unit Mounting Sleeve Single DIN Metal Bracket(Not supplied) Decorative Bezel Existing Brackets New Radio Mounting the Head Unit:
Typical DIN mounting Step 1:
Insert the mounting sleeve into the installation kit or dashboard. Step 2:
Bend multiple mounting tabs around the mounting sleeve until the mounting sleeve is secure. Step 3:
Connect all wiring harnesses and slide the head unit into the mounting sleeve until it clicks into place. Mounting the Head Unit:
ISO mounting Using the existing brackets or the brackets supplied with the installation kit, mount the brackets to the sides of the head unit with the screws supplied with the head unit. Power On/Off Changing Modes General Operation Press the turn unit off. button to turn the unit on. Press again to Seek Tuning Press MODE to select between AM/FM, CD Player, AUX, and USB. Modes of operation are shown in the display. Manual Tuning AM/FM Tuner Operation Press TUNE nn or TUNE ll for more than one second to seek to the next strong station. Press TUNE nn or TUNE ll momentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly. Volume Adjust volume using volume knob. Mute Press listening at the previously selected volume. to silence the audio. Press again to resume Auxiliary Inputs Insert a 3.5mm cable in the units front AUX port. Reset Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. Reset button is located under the volume knob of the front panel. Setting the Clock With the unit on, press and hold DISP until the clock begins to flash. Press TUNE<< to adjust the hours, and TUNE >> to adjust the minutes. Release DISP to save the selected time. Display Press DISP to toggle display between various displayed information. Band Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Up to six presets can be programmed for each band, enabling up to 18 FM stations and 12 AM stations to be stored in memory. Storing Presets Up to 18 FM and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display. Recalling Presets Preset stations can be recalled any time by pressing the corresponding preset button. Automatically Store MENU
,then press DISP SONG song. Audio / Menu Press or press and hold Volume Knob to access to select between the audio functions or menu functions. Press the volume knob to select functions and rotate it left/right to adjust or activate the desired function. Touch PS to recall each preset station that has been stored in memory for each band.
(Available with the Dual Smart Remote App only) To download the complete Owners Manual for your radio, please visit www.dualav.com/support/manuals.php. To download the complete Owners Manual for your radio, please visit www.axxeraaudio.com/support/manuals.php. To download the complete Owners Manual for your radio, please visit www.dualav.com/support/manuals.php. Playing MP3 Files Track Select Fast Forward and Reverse Pause Repeat MP3 Operation To play MP3, insert a data CD/USB, containing MP3. Preparation Pairing a New Device Press TUNE ll to skip to the beginning of the next song. Press TUNE nn to return to the beginning of the current song. Pressing TUNE nn again skips to the beginning of the previous song. Press and hold TUNE ll or TUNE nn to fast forward or reverse a track. Press l/ II to temporarily stop playback. Press l/ II again to resume playback. Press RPT to enter the Repeat menu, then turn the volume knob to select one of the following options:
ALL - Plays all tracks on disc or device. SONG - Continuously repeats selected song. FOLDER - Continuously repeats all files in folder. Bluetooth Operation Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process. The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owners manual for your device for more details. The device name is Dual BT The Bluetooth passcode is "1234 ote If passcode "1234" does not pair your device to the receiver, use passcode "0000". Note: The head unit can be in any mode of operation when pairing is performed. APP Operation The Dual Smart App is the ultimate wireless remote control for your XDM290BT receiver. You can download Dual Smart app from Apple App Store or Google Play Store and install it on your smartphone or tablet. Please scan the following QR code to download Dual iPlug P2 App to your smart phone. Random Press RDM to enter the Random menu, then turn the volume knob to select one of the following options:
OFF - Cancels RDM function. ALL - Plays all tracks in random order. FOLDER - Plays all tracks in folder in random order. Intro Press INT to enter the Intro menu, then turn the volume knob to select one of the following options:
OFF - Cancels the INT function. ALL - Plays first 10 seconds of each track. FOLDER - Plays first 10 seconds of each track in the selected folder. Voice Activation Operation Voice Activation Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button , and the receiver will switch into Bluetooth mode, This will activate Siri or Google AssistantTM on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated. To download the complete Owners Manual for your radio, please visit www.dualav.com/support/manuals.php. To download the complete Owners Manual for your radio, please visit www.dualav.com/support/manuals.php. Limited One-Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. (Note that select marine products carry a 2-year warranty. Please visit www.dualav.com for details.) Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased and used in the U.S.A. What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. What to do?
1. Before you call for service, check the troubleshooting guide in your owners manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us toll-free at 1-866-382-5476 or by email at cs@dualav.com. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Dual Electronics Corp. Toll Free: 1-866-382-5476 Monday-Friday, 9AM-5PM www.dualav.com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the companys negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages. 2019 Dual Electronics Corp. All rights reserved. NSA0719-V01
This product uses the FCC Data API but is not endorsed or certified by the FCC