USB2 Guide Users Manual

Dynastream/011-02209-01 Dynastream Innovations USB2 ANT Stick 011-02209-01 Quick Reference Guide Warning See the owners manual for your ANT wireless device for product warnings and other important information. Requirements USB port (for optimal performance, keep the area free of clutter) Bring your wireless device within range (5 m) of your computer. Internet connection (for software download) Step 1: Download Free Software You must download software so that the necessary USB drivers are installed before connecting the USB ANT stick to your computer. 1. Turn on your computer. 2. Go to www.thisisant.com 3. Follow the on-screen instructions to download the device drivers. Step 2: Connect USB ANT Stick Connect the USB ANT stick to an available USB port on your computer. Step 3: Pair and Transfer Using ANT wireless technology, the USB ANT stick starts searching for your ANT wireless device. Follow the on-screen instructions. After you pair the first time, your USB ANT stick automatically recognizes your ANT wireless device each time it is in range. NOTE: The pairing settings differ for each ANT wireless device model. See your owners manual. Technical Specifications Physical size: W H D 2.4 0.7 0.3 in. (60 18 8.6 mm) Weight: 6 g Transmission range: Approximately 16.4 ft. (5 m) Operating temperature: 14F122F (-10C50C) Dynastream/011-02209-01 Radio frequency/protocol: 2.4 GHz / ANT wireless communications protocol Power source: USB Dynastream/011-02209-01 Warning Important Safety and Product Information Failure to avoid the following potentially hazardous situations could result in death or serious injury. Health Warnings This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This notice is provided in accordance with Californias Proposition 65. See www.garmin.com/prop65 for more information. Declaration of Conformity Hereby, Garmin declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product:

www.garmin.com/declaration-of-conformity. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet that is on a different circuit from the GPS device. Consult the dealer or an experienced radio/TV technician for help. This product does not contain any user-serviceable parts. Repairs should only be made by an authorized service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. Industry Canada Compliance Category I radiocommunication devices comply with Industry Canada Standard RSS-210. Category II radiocommunication devices comply with Industry Canada Standard RSS-310. Dynastream/011-02209-01 Limited Warranty This Dynastream product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Dynastream will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorized service provider of Dynastream; or (v) damage to a product that has been modified or altered without the written permission of Dynastream. In addition, Dynastream reserves the right to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL DYNASTREAM OR GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Dynastream retains the exclusive right to repair or replace (with a new or newly-overhauled replacement product) the device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact Dynastream Product Support for shipping instructions and an RMA tracking number. Securely pack the device and a copy of the original sales receipt, which is required as the proof of purchase for warranty repairs. Write the tracking number clearly on the outside of the package. Send the device, freight charges prepaid, as directed by Dynastream.