EM234GYY Microwave Oven User manual

 

Microwave Oven INSTRUCTION MANUAL Model:EM234GTQ-S Read these instructions carefully before using your microwave oven, and keep it carefully. If you follow the instructions, your oven will provide you with many years of good service. SAVE THESE INSTRUCTIONS CAREFULLY Guangdong Midea Microwave and Electrical Appliances Manufacturing Co.,Ltd. MD Microwave Oven Manufacturing Yongan 6 Road, Beijiao, Shunde, Guandong P.R.C PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

(a) Do not attempt to operate this oven with the door open since this can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.

(c) Do not operate the oven if it is damaged. It is particularly important that the oven door closes properly and that there is no damage to the:

(1) DOOR (bent)

(2) HINGES AND LA TCHES (broken or loosened)

(3) DOOR SEALS AND SEALING SURF ACE

(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. Specifications Model:

Rated Voltage:

Rated Input Power(Microwave):

Rated Output Power(Microwave):

Oven Capacity:

External Dimensions:

Net Weight:

0V~60Hz EM134GTQ-S 12 2000W 12 00W 34L 575 527 368mm

. Approx 25. kg 2 IMPORTANT SAFETY INSTRUCTIONS WARNING When using electrical appliances basic safety precautions should be followed,including the following:

WARNING-To reduce the risk of burns,electric shock, fire,injury to persons,or exposure to excessive microwave energy

::

:

1. Read all instructions before using the appliance. 2. Read and follow the specific: "PRECAU-

TIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY"

found on page 2. 3. As with most cooking appliances, close supervision is necessary to reduce the risk of a fire in the oven cavity. 4.To reduce the risk of fire in the oven cavity:

i). Do not overcook food. Carefully attend the appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. ii).Remove wire twist-ties and metal handles from paper or plastic containers/bags before placing them in the oven. iii). If materials inside the oven ignite, keep the oven door closed. Turn the oven off, and unplug the appliance. Disconnect the power cord, shut off power at the fuse or circuit breaker panel. iv). Do not use the oven cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. 5. This oven must be grounded. Connect only to properly grounded outlet. See

"GROUNDING INSTRUCTIONS" found on page 4. 6. Install or locate this oven only in accordance with the installation instructions provided. 7. Some products such as whole eggs and sealed containers-for example, closed glass jars-are able to explode and should not be heated in the oven. 8. Use this appliance only for its intended uses as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This oven is specifically designed to heat or cook or dry food. It is not designed for industrial or laboratory use. 9. As with any appliance, close supervision is necessary when used by children. 10. Do not operate this oven if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. 11. This appliance should be serviced only by qualified service technicians. Contact the nearest authorized service facility for examination, repair or adjustment. 12. Do not cover or block any openings on the oven. 13. Do not store or use this appliance outdoors. 14. Do not use this oven near water, for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations. 15. Do not immerse cord or plug in water. 16. Keep cord away from heated surfaces. 17. Do not let cord hang over edge of table or counter. 18. When cleaning surfaces of door and oven that comes together on closing the door, use only mild, nonabrasive soaps or detergents applied with a sponge or soft cloth. 3 19. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUIDS SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A SPOON OR OTHER UTENSIL IS INSERTED INTO THE LIQUID. i) Do not overheat the liquid. ii) Stir the liquid both before and halfway through heating it. iii) Do not use straight-sided containers with narrow necks. iv) After heating, allow the container to stand in the microwave oven for a short time before removing the container. v) Use extreme care when inserting a spoon or other utensil into the container. SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS DANGER Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance. WARNING Electric Shock Hazard Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded. This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-pronged grounding plug, and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance. 4 1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. 2. Longer cord sets or extension cords are available and may be used if cared is exercised in their use. 3. If a long cord sets or extension cord is used:

1) The marked electrical rating of the cord set or extension marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. 2) The extension cord must be a grounding-type 3-wire cord; and 3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. Radio Interference 1. Operation of the microwave oven may cause interference to your radio, TV or similar equipment. 2. When there is interference, it may be reduced or eliminated by taking the following measures:

1) Clean door and sealing surface of the oven 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver. 5) Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits. UTENSILS CAUTION Personal Injury Hazard Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches should be pierced before cooking. See the instructions on "Materials you can use in microwave oven or to be avoided in microwave oven."

There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below. Utensil T est:

1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the utensil in question. 2. Cook on maximum power for 1 minute. 3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking. 4. Do not exceed 1 minute cooking time. 5 Remarks Dinnerware Browning dish ceramic board the ceramic board. Incorrect usage may Materials you can use in microwave oven Utensils Aluminum foil Shielding only. Small smooth pieces can be used to cover thin parts of meat or poultry to prevent overcooking. Arcing can occur if foil is too close to oven walls. The foil should be at least 2.5cm away from oven walls. Follow manufacturers instructions. The bottom of browning dish must be placed smoothly on cause the Microwave-safe only. Follow manufacturer's instructions. Do not use cracked or chipped dishes. Always remove lid. Use only to heat food until just warm. Most glass jars are not heat resistant and may break. Heat-resistant oven glassware only. Make sure there is no metalic trim. Do not use cracked or chipped dishes. Follow manufacturers instructions. Do not close with metal tie. Make slits to allow steam to escape. Use for shortterm cooking/warming only. Do not leave oven unattended while cooking. Use to cover food for reheating and absorbing fat. Use with supervision for a short-term cooking only. Use as a cover to prevent splattering or a wrap for steaming. Oven cooking bags Paper plates and cups Paper towels Glassware Glass jars to break. Parchment paper Plastic Plastic wrap Microwave-safe only. Follow the manufacturers instructions. Should be labeled "Microwave Safe". Some plastic containers soften, as the food inside gets hot. "Boiling bags" and tightly closed plastic bags should be slit, pierced or vented as directed by package. Microwave-safe only. Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. Thermometers Microwave-safe only (meat and candy thermometers). Wax paper Use as a cover to prevent splattering and retain moisture. Remarks May cause arcing. Transfer food into microwave-safe dish. May cause arcing. Transfer food into microwave-safe dish. Materials to be avoided in microwave oven Utensils Aluminum tray Food carton with metal handle Metal or metal-

trimmed utensils Metal twist ties Paper bags Plastic foam Metal shields the food from microwave energy. Metal trim may cause arcing. May cause arcing and could cause a fire in the oven. May cause a fire in the oven. Plastic foam may melt or contaminate the liquid inside when exposed to high temperature. Wood will dry out when used in the microwave oven and may split or crack. Wood 6 SETTING UP YOUR OVEN Names of Oven Parts and Accessories Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following Instruction Manual 1 accessories:

part and G s A C F B E D A) Control panel B) Observation window C) Door assembly D) Safety interlock system E) Ceramic board Back plate F)

) G Front plate Note: 1) Don't press the ceramic board forcibly. 2) Take and put the utensils gently during the operation in order to avoid damage the to 3) After using, don't touch the ceramic board by hand in order to avoid high temperature

. ceramic board scald

. 7 Countertop Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Installation 1. Select a level surface that provide enough open space for the intake and/or outlet vents

(

Fig 1 1ure Fig

)

. inch(

12

) 30cm 4.0 inch(10cm) 4.0 inch(10cm) OPEN Cabinet: Remove any protective film found on the microwave oven cabinet surface. Fig 2 A B eft The l side must be open. A 10-cm spacing should be kept between the appliance and right and back walls, and a 30-cm spacing kept on the top.Never dismantle the applicance's feet ,nor block the air intake and exhaust opening. 1) Blocking the intake and/or outlet openings can damage the oven.

) Place the oven as far away from 2 radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception. 3 Plug your oven into a standard household

) outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label. 4Warning: T he plug socket,electric a of degree overlap appliances or the appliance which are liable effected by heat and moisture should be kept away from any vents on the oven. 2.The applicance can be installed with The maximum overlap height is loosening screw

,Taking off installation board

(A then replacing screw in its place tightly.

) taking off four screws as shown in the pictur

(B

) putting

(

C then fixing screw just taking off tightly installation following board Figure2 layers.

)

. two the to

(

e. location C 8) Cleaning Instructions Always keep the oven clean 1. Cleaning the glass viewing window, the inner door panel and oven front face. For best performance and to maintain the high degree of safety, the inner door panel and oven front face should be free of food or grease build-up. Wipe these parts with a mild detergent, rinse and wipe dry. Never use abrasive powders or pads. 2. Cleaning the control panel and plastic parts. Do not apply a detergent or an alkaline liquid spray to the control panel and plastic parts, as this may cause damage to these parts. Use a dry cloth (not a soaked cloth) to clean these parts. 3. Cleaning the oven interior After use be sure to clean up spilled liquids, spattered oil and food debris as quickly as possible. If the oven is used when dirty, efficiency drops and the dirt gets stuck on the oven surface and may cause bad odours. Clean the interior with a cloth soaked in luke-warm water with a mild detergent dissolved in it, then rinse the soap off with a damp cloth. 4. Cleaning the oil blockage regularly, keep the oil blockage clear .Otherwise,the stain on the oil blockage will drop on the food. 5. Cleaning the filter regularly, keep it clear .The appliance will over heat when the filter is blocked. 6.When the appliance is operated,oil blockage and filter location must correct vioding to

(

.

) the installation in page 18 and 19 damage other parts

,a CAUTION: Do Not wipe plastic and painted sections of the oven with bleach, thinners or other cleaning agents, as this may cause these parts to dissolve or change sharp. Radio Interference 1. Operation of the microwave oven may cause interference to your radio, TV or similar equipment. 2. When there is interference, it may be reduced or eliminated by taking the following measures:

1) Clean door and sealing surface of the oven 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver. 5) Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits. 9 OPERATION Control Panel and Features

(1)

(2)

(3)

(4)

(5)

(6)

(1) Power Buttons

(2) Time Entry Button

(3) Double Quantity Button

(4) Stop/Reset Button

(5) Start Button

(6) Number Keyboard 10 OPERATION INSTRUCTION Appendix. A User Options Items bolded below are the default values. Option 1 EOC Tone 2 Beeper Volume 3 Beeper On/Off 4 Keyboard Window 5 On the Fly 6 Door Reset 7 Max time 8 Manual Programming 9 Double Digit Setting OP:10 OP:11 OP:12 OP:20 OP:21 OP:22 OP:23 OP:30 OP:31 OP:40 OP:41 OP:42 OP:43 OP:50 OP:51 OP:60 OP:61 OP:70 OP:71 OP:80 OP:81 OP:90 OP:91 Discription 3 seconds beep Continuous beep 5 quick beeps,Repeating Beeper Off Low Medium High Keybeep Off Keybeep On 15 seconds 30 seconds 60 seconds 120 seconds On-the-Fly Disable On-the-Fly Enable Door reset Disable Door Reset Enable 60 Minute Maximum Cook Time 10 Minute Maximum Cook Time Manual Programming Disable Manual Programming Enable Single Digit Mode-10 programs Doule Digit Mode-100 programs 11 Appendix. B Default Cook Times The oven shall ship with the following Preset Cook Times unless otherwise noted in the product Specification. Button Display (Time) 1 2 3 4 5 6 7 8 9 0 0:10 0:20 0:30 0:45 1:00 1:30 2:00 2:30 3:00 3 3

: 0 Power 100%

100%

100%

100%

100%

100%

100%

100%

100%

100%

Cook Factors 80%

80%

80%

80%

80%

80%

80%

80%

80%

80%

12 1. Power Up _ _ _ _ _ _ _

" " displays when the oven is electrified for the first time. If " " button pressed, the oven will change to idle mode. For some model:

"

230V TOUCH 1 208V TOUCH 2 Press number buttons "1" or "2" to choose,the screen will alternate display

"230V" or "208V", rolling display "TOUCH START",press " " button, the oven will change to idle mode. Note: Under idle mode, no button can be pressed. displays

"

when the oven is electrified for the first time. 2. Idle Mode 1) Entry.The oven shall enter idle mode after a set of seconds have expired in Ready Mode without a keyboard press or a door open and close. The number of seconds is determined by the keyboard Timeout Window, set by User Option 4. 2) During idle mode, 3) Opening and then closing the oven door, the oven will exit the idle mode and into ready mode. is blank.And there shall be no oven activity. the screen 3. Ready Mode 1) In this mode, the oven is ready to either begin a manual or preset cook cycle. 2) Opening and closing the door while the oven is in Idle Mode will put the oven into Ready Mode. 2) During Ready Mode, "READY" displays. 3) From the Ready Mode, the oven can go to almost all of the other modes. the screen 4. Door Open Mode 1) While the door of the oven is open, the oven shall be in Door Open Mode. 2) During this mode, 3) When the door is closed, if User Option OP:60 is selected and the oven was running a manual or preset cook cycle, the oven shall enter Pause Mode. In all other cases, the oven shall return to set,opening and closing the door will clear out any information about a Manual or Preset Program which was running. is blank. And the fan and oven lamp work. Door open Mode with User Option OP:61 13 5. Pause Mode 1) This mode allow the users to temporarily stop the cooking cycle to inspect or stir the food item. 2) While in Manual Cook Mode, or Preset Program Cook Mode, if the door is open or closed, or if the " " pad is pressed, the oven will enter Pause Mode. 3) While paused, 4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode, dependent on User Option 4. Additionally,if the " " button is pressed, the oven shall immediately enter Ready Mode.OR if press " " button, the oven will go into working mode. will display the remaining cooking time. the screen 6. Manual Cook Entry Mode 1) The user may manuallly enter a cook time and power level while in this mode. 2) While the oven is in the Ready Mode,pressing the "Time Entry" pad on the keyboard will put the oven into Manual Cook Entry Mode. 3) During this mode, "00:00" displays 4) If you press "Hold 0% "," Defrost 20%","Medium 50%" or "Med-Hi 70%" button to select power level, the screen will display the related power. If the same button pressed twice,

,input the time you need. the power will change to PL10. If no power chosen, "PL 0" is default. 5) During setting process, press " " to enter Manual Cook Mode. Press " " to enter Ready Mode. 1 7. Manual Cook Mode 1) This mode allows cooking of the food items.While in Manual Cook Entry Mode, pressing the " " pad will cause to the oven to begin Manual Cook Mode. 2) During this mode, remaning cooking time displays. The fan and oven lamp will light. 3) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode. 14 8. End of Cook Cycle Mode 1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode, the oven shall go into The End of Cook Cycle Mode. 2) During this mode, "DONE" displays. 3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until the user acknowledges this by either opening and closing the door or pressing the " "

pad. If User Option OP:10 is selected, after the 3 second beep, the oven shall go into Ready Mode. 9. Preset Program Cook Mode 1) This mode allows cooking of food items through a one pad touch operation. While in Ready Mode,pressing one of t the oven to run the Preset Program associated with that key. 2) During this mode, the total remaning cooking time displays not a particular stage cooking time.

) When cooking program finish, the oven will enter End of Cook Cycle Mode. 3 If you press " " button under this mode,the oven will enter Pause Mode. the screen en digit keys on the keyboard will cause displays the remaining cooking time. If it is multi-stage cooking, 10. On the Fly Cooking 1) While the oven is cooking, if User Option OP:51 is selected,press number buttons, the preset cooking program will start automatically. 2) The screen displays the remaining cooking time. 3) When cooking program finish, the oven will enter End of Cook Cycle Mode. 15 11. Programming Mode This mode allows the user to assign cook times and power levels to the once touche button. 1) Open the door and press "1" pad for 5 seconds,the buzzer will sound once and enter to Programming Mode. 2) "PROGRAM" displays. you can input the time you need. 3) Press "

the screen will change to PL10. If no power chosen, "PL 0" is default. Note: et the time first,then choose the power.

) To change the cooking fators: If press "X2", 4 factor is Hold 0% "," Defrost 20%","Medium 50%" or "Med-Hi 70%" to input the power level. will display the related power. If the same button pressed twice, the power

" displays. If you need to change the cooking will display "CF:XX". The default

, just press one of 80%. "CF:

the screen factor 08 S 1 s. the number buttons to set. 5) After setting the time and power, press " ", the cooking program will be saved. When the program saved, "PROGRAM" display 6) If all the cooking time exceeds the MAX.time User Option 7, when press

" " to save the program, the buzzer will sound three times briefly tell you the time is no use. And then The time set before will be no change.

) Close the door, the oven will turn back to Ready Mode. 7 If press " " button during setting process, the oven turn to Door Open Mode. The program that not saved will be lost. If there is program saved as memory procedure, press the related number button, the saved program will start. If no saved program, the buzzer will alarm when pressing number button and it will not work. turn back to display "PROGRAM". the screen to For example: set the program as memory cooking. Power level PL7 and cooking time is 1 minute and 25 seconds. Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays. Step 2: Press number button "3", the screen will display "P:03",After two seconds, the screen will display the related time " :30". 5 70 1:25 Step 3: Press number buttons "1", "2" and "5" to input the cooking time. Step 4: Press "Med-Hi/70% " button,"

" displays. Setting finished. Step : Press " " to save. When use the program next time, just press "3", the related program will start. Note:

1. If the electricity is cut off, the saved program will not lost. 2. If the program need to reset , just repeat the aboved steps. 3. If press " " at the last step, it will turn back to Ready Mode. The setting will be no use. 16 12. Double Quantity cooking 1) Through the use of the X2 pad, the user can easily set the time two of a particalar food item. 2) If the "X2" button is pressed in ready mode, followed by the starting of a Preset Program, or if the "X2" button is pressed in 5 secondes of starting a Preset Program, the oven will start cooking with the quantity preset cooking time. 3) Press "X2", "DOUBLE" displays. When press number buttons, the screen will display the quantity preset time. e preset mode. programm manual cook mode and program ing m de. For example, number button "5" and its preset time is 1 minute. Then press "X2", then time will change to 1:00*(1+0.8)=1:48(1 minute and 48 seconds) 4) When cooking program finish, the oven will enter End of Cook Cycle Mode. Note: This function can be used under 13. Stage Cooking Programming This allows the user to cook food items at m 1) Three stages can be set at most under cooking mode or programming mode. Aftet setting the power and time for the first stage, press "Time Entry " to set the second stage. And the same step to set the third stage. 2) When setting the second, third stage, press " Time Entry", "STAGE 2","STAGE 3"

3) Press " " button to start cooking. Example: In programming mode, The 5 minutes and 40 seconds. The steps are follow. a. b. Press number button "3", the screen will display "P:03",After two seconds, press number buttons " "3 to stages cooking. is 1 minute 25 seconds. The second stage is PL5 and ress number button "1" for 5 seconds,"PROGRAM" displays. first stage is PL7 and Open the door displays. time set t wo

,p o

-

-

the screen will display the related time

"

:30". 1:25 70" displays. Press " Time Entry", "STAGE 2" displays. c.Press "1","2","5" to input the cooking time. "1:25" displays. d. Press "Med-Hi 70% ", "

The first stage is finished. e. f. Press "5", "4","0" button, "5:40" displays. 5:40 g.Press "

The second stage is finished. h. The total time cout s down. i Press " " button to start cooking. Medium 50% ", "

" displays. 50 n

-

17 displays "OP: - -". 14. Use Option Mode This allows the user choose between various ways for the oven to operate. 1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter this mode. 2) The screen 3) Press any number button to enter related mode setting. For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays. If you want to change, keep pressing "2",

"OP:20" .....in cycle. 4) Press " " to save the current setting. After saved, "OP: - -" display again. 5) During setting process, press " " to enter Door Open Mode. Close the door will enter Ready Mode. 6) If " " button not pressed at the last step, the program cannot be saved but stay at previous way. displays "OP:20", "OP:21","OP:22","OP:23", the screen

". RVICE the screen The screen displays "SE 15. Service Mode 1) Open the oven door and press "3" pad for 5 seconds to enter service mode. 2) 3) To check the times of closing or opening the door, just press number button "3", will display the times. 4) If press " 1 " pad for Tube Hours. If press " 2 " pad for Tube Cycles. If press " 3 " pad for Door Cycles.. If press " 4 " pad to Clear service information. Only for some medels:

If press " 5 " pad to run Top Mag. Oven displays amps. If press " 6 " pad to run Bottom Mag. Oven displays amps. 5) Press " " to enter Door Open Mode. Close the door will enter Ready Mode. 16. Factory-default setting In the Ready Mode,pressing " " an " 0 " to factory-default setting. 1) Press " " and " 0 ", the buzzer sounds once,and the screen wil l display "CHECK". I f i t is in the turn to the ready If not in to cancel the display ang back to ready back in the process of display. will display " 11 ",after three seconds, the screen the oven d the screen will display " 00 ", press" " to the factory-default setting, will display " CLEAR ". the buzzer sounds once, after self-testing,the screen will

. Press" "

factory-default setting, mode the factory-default setting, the screen display "

"

"11 or

"00 . 2) If do not press " " when the operation Note:

Be careful in the screen as it will display " 00 ",the setting will cancel. restore all configure to f actort-default setting

. 18 How to remove and install the filter Pull up the plastic nail cap Take off the fil er . t To restall,align the base plate mounting holes, insert the plastic nails,press the plastic nail cap

. 19 How to remove and install the oil blockage Warning:Before remove and install the oil blockage, appliance from the power supply,and avoid high temperature scald. be sure to unplug the thumb pressed here 1 hands with oil blockage ,pressed on the arrow shown,pushed back slamly, then pulling down. 2.status of remove 1.Hands to take the oil three cylinder of the oil the three holes of the back plate. blockage blockage

,after alignment

, inserting thumb pressed here 2.The left hand grasp the microwave, right thumb to press the arrow directions and forced to push back. And same time. put the right of oil blockage of the front plate the buckle left thumb hard pressed upword at the into the

. 3.taking oil blockage from the appliance. 3.From right to left, make the oil hen finish, check to buckle completely go. ensure that blockage loaded. blockage the oil 20W Trouble shooting 21