GAN CUBE User Manual

GANROBOT Read carefully before using Thank you for selecting GAN ROBOT GAN ROBOT is the first generation of cube robot which launched by GAN It can disturb the cube according to the specified formula by connecting APP and improve the speed competition level. Specification Model GANROBOT product size 152*152*44.8mm USB adapter 5v 2A connection wireless product weight Device require ment 408.5g IOS 9.0 Android 4.4or above Must knows Connecting to APP Make sure the Cube robot is connected to the power supply and disconnected other devices or APP ,before each connection Pleaseconnect with Cube APP, not pair in the Bluetooth list of mobile devices or other application only Usage Restrictions Please use the product follow to the product instruction manual , Any loss and injury caused by improper operation shall be borne by the user GAN Robot contains electronic component , Do not dismantle the core to damage it Do not crash the product avoid from water or high temperature (>60) Product contains small parts , NOT suitable for children under 36 months Charging Use the adapter and USB cable provided for charging only ,Ensure good condition of them before connecting to power FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.