BCEA002 Bluetooth Module User Manual

 

Information Sheet PCB Assembly GE Appliances Service Tool WX05X15003 Parts Included:

Appliance Service Tool Ethernet Cable (3 ft.) USB-A to Micro B 2.0 Cable (0.5 ft.) Support information for NewFI Mobile is available at the link below. Users must be logged into the Service Website at ge-tag.custhelp.com before clicking on the support link:

NewFI Support:

ge-tag.custhelp.com/app/answers/detail/a_id/35593/

kw/newfi%20mobile WARNING Although not recommended, if using a 120V adapter or a 12V 2.5mm barrel jack AC converter to power your device, use the recommended parts below. 1. 120V adapter:

SWI12-12-N-P6 from CUI. The datasheet is available here: http://www.mouser.com/ds/2/670/

swi12-n-607261.pdf 2. 12V 2.5mm barrel jack AC converter:

Requirements are as follows:

Output 12VDC Input 100 140 VAC minimum Output Current: 200mA minimum Must be UL rated and FCC Part 15B Class B rated Must have over current protection of at most 3A Operating temperature of 0C 40C minimum REGULATORY INFORMATION FCC/IC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to:

a) Provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. b) Accept any interference received, including interference that may cause undesired operation of the device. NOTE: Any changes or modifications to this wireless communication device that are not expressly approved by the manufacturer could void the users authority to operate the equipment. This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Information Le prsent appareil est conforme aux CNR dIndustrie Canada applicable aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

lappareil ne doit pas produire de brouillage, et lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles les radiolectriques (RF) de la FCC lignes directrices dexposition et dexposition aux frequencies radiolectriques (RF) CNR-102 de lIC. Cet quipement met une nergie RF trs faible qui est considre conforme sans valuation du dbit dabsorption spcifique (DAS). 99-3000067 Rev. 1 02-19 GEA FCC RF Radiation Exposure Statement:

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Regulatory Module Integration Instructions:

This Wi-Fi module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained. The host product with the module installed must be evaluated for simultaneous transmission requirements. The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF exposure guidelines. To comply with FCC / IC regulations limiting both maximum RF output power and human exposure to RF radiation, use this module only with the included onboard antenna. A label must be affixed to the outside of the host product with the following statements:

Product Name : Bluetooth Module (Appliance Service Tool) Contains FCCID: ZKJ-BCEA002 Contains IC: 10229A- BCEA002 The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. NewFI Mobile Quick Start Guide 1. Download and Installation

Play store on Android devices and search for NewFI Mobile.

download and install NewFI Mobile app on your device.

device. 2.

connector or by connecting to the appliance. IPhone/ IPad pairing to diagnostic tool

Module), navigate to Bluetooth settings.

Connected.

and connected to the phone. 3. Registration

a new account.

Language and click onRegistertab.

displayed.

with.

confirming the email address.

4. Access Request

time with the email and password you just used to register.

displayed.

5. Login

Android.