| submitted | available | document details (if available) | source link |
|---|---|---|---|
| June 09 2019 | June 09 2019 | 打印 Adobe PDF library 10.01 |
| various | User Manual | Users Manual | 4.43 MiB | June 09 2019 |
Appearance Screen Fingerprint Recognion Area 155 mm 28 mm 1 m m 0 4 1 Power Interface Network Interface OK Key Exing Key Direcon Keys ESC OK 1 4GHI 7PQRS 2ABC 5JKL 8TUV 3DEF 6MNO 9WXYZ Numeric Keys/
Leer Keys 0 Eding Key Deleng Key Keypad Keypad Descripons OK Key: Press the key and conrm operaons. Hold the key for 3 s to enter the login interface. Deleting Key: Press the key to delete the entered leer or number. If the device supports connecng lithium baery, long press the key to power o the device. Direction Keys: Press , , and to move the cursor on the screen. Or on the text entering page, press up or down buon to change the input method. Exiting Key: Press the key to exit the menu. Numeric Keys/Letter Keys: Press the key to enter numbers or leers. Key 0 can also represent a space key except you are using the number input method. Editing Key: Press the key to enter the eding status. You can shi among numbers/lowercases, numbers/uppercases and symbols. Notes:
1. The pictures here are for reference only. Some models do not support card presenng funcon. For details, refer to the actual products. 2. If the aendance mode is Manual, the OK key, the direcon key, and the exing key can be the shortcut key of the aendance status. DS-K1A802A Series Fingerprint Time Aendance Terminal Quick Start Guide UD15388B-A Keypad Card Presenng Area Front View Side View USB Interface Debugging Port Back View 2 Installation 152 mm m m 7 2 1 2019 Hangzhou Hikvision Digital Technology Co., Ltd. It includes instrucons on how to use the Product. The soware embodied in the Product is governed by the user license agreement covering that Product. About this Manual This Manual is subject to domesc and internaonal copyright protecon. Hangzhou Hikvision Digital Technology Co., Ltd. (Hikvision) reserves all rights to this manual. This manual cannot be reproduced, changed, translated, or distributed, parally or wholly, by any means, without the prior wrien permission of Hikvision. Trademarks and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applicaons for the same by Hikvision and/or its aliates. Other trademarks menoned in this manual are the properes of their respecve owners. No right of license is given to use such trademarks without express permission. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protecon During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognion features, biometrics data is stored in your device with encrypon method; for ngerprint device, only ngerprint template will be saved, which is impossible to reconstruct a ngerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protecon laws and regulaons, including without limitaon, conducng security controls to safeguard personal data, such as, implemenng reasonable administrave and physical security controls, conduct periodic reviews and assessments of the eecveness of your security controls. Method 1:
Wall Mounting without Mounting Plate Method 2:
Wall Mounting with Mounting Plate 1. Drill 4 holes on the wall or other places according to the mounng template. (Supplied) Note: The length and width will be 2 to 3 mm smaller than the actual devices. 2. Insert the screw sockets of the setscrews in the drilled holes. 3. Fix and fasten the screws in the sockets on the wall or other places. (You should reserve 5.2 mm to 5.5 mm for the hanging the device when x and fasten the screws.) 4. Align the 4 holes on the device plate with the xed screws and hang the device on the wall. 120 mm 68.1 mm 36.5 mm m 66.6 mm m 5 1 5 2
. m m 6 0 3 1
. m m 5 6 3 8
. m m 2 3 5
. 3 2 1 Device Mounting Plate Gang Box Wall 4 4 Steps:
1. Install the gang box on the wall. Note:
Make sure the gang box screw holes match the mounng plates. The gang box here is for reference only. Select an appropriate gang box to install. The gang box is not supplied. 2. Fix the mounng plate on the gang box with 2 supplied screws (SC-PM4X10-IMP). 3. Route the device cable through the cable hole of the mounng plate and insert the cables in the gang box. 4. Align the terminal with the mounng plate, and secure the terminal on the mounng plate with two supplied socket hexagon screws (SC-KM3X10_3-SUS). 3 Basic Operation 1 Activation Activating via Device Power on and wire the network cable aer installaon. You should acvate the device before the rst login. Aer powering on, the interface will be displayed as follows. You can create the device password and conrm the password to acvate. The default values of the terminal are as follows:
The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin Device Acvaon Acvaon Password (8 to 16 Characters) OK Next Input Method
[Number]
Activating via SADP 1. Download SADP Soware Get the SADP soware from the supplied disk. Install and run the soware. 2. Acvate Device Check the inacve device from the device list. Create a password in the right side of the interface and conrm the password. 3. Edit Device IP Address Check the device and manually edit the device IP address, Port No., Subnet Mask, Gateway, etc. STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case leers, lower case leers, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, reseng the password monthly or weekly can beer protect your product. Activating via Client Software 1. Get the client soware from the ocial website. Install and run the client soware. 2. Enter the Device Management page. 3. Click Device tab on the top of the right panel. 4. Click Online Device to show the online device area at the boom of the page. The searched online devices are displayed in the list. 5. Check the device status (shown on Security Level column) and select an inacve device. 6. Click Acvate to open the Acvaon dialog. 7. Create a password in the password eld, and conrm the password. 8. Click OK to acvate the device. 9. Select an acvated device in Online Device area, click on the Operaon column to open the Modify Network Parameter window. Change the device IP address to the same subnet with your computer if you need to add the device to the client. Parameters Configuration 2 Congure the shi schedule by department or by individual. Schedule Shift by Department Flow: Add User (Select department when adding new user.) - Department Management - Shi Management - Add Holiday - Shi Schedule Management (Schedule Shi by Department) Schedule Shift by Individual Flow: Add User - Shi Management - Add Holiday - Shi Schedule Management (Schedule Shi by Individual) Attendance Status: Set aendance status as check in, check out, break out, break in, overme in, or overme out. Add User: Edit the ID No. and the user name. Press the OK key to conrm. Enter the card No., register the ngerprint, set the password, select the department, select the user role and select the authencaon mode. Save the parameters to conrm adding. The employee ID should be unique, should be between 1 and 99999999, and should not start with 0. Edit Department: Select the department in the department list and select Edit. Edit the department name, the shi type and the shi name. Save the parameters to conrm eding. Shift Management:
Normal ShiEnter the Normal (Normal Shi) interface under the Shi Management menu. Congure the shi rule and the normal shi. Save the parameters to conrm eding. Man-Hour Shi: Enter the Man-Hour (Man-Hour Shi) interface under the Shi Management menu. Congure the man-hour parameters and save the parameters. Add Holiday: Enter the New Add New Holiday interface under the Holiday menu. Enter the holiday No., the holiday name, the holiday start date and the holiday end date. Save the parameters to conrm conguraon. Shift Schedule Management:
Schedule Shi by Department: Select a department to congure in the By Dept. (Schedule by Department) interface. Congure the shi, the start date, the end date and the holiday. Save the parameters to conrm conguraon. Schedule Shi by Individual: Select New Individual Shi in the By Indiv. (Schedule by Individual) interface. Select a person to schedule in the New Individual Shi interface. Congure the shi, the schedule start date and the end date. Save the parameters to conrm eding. Attendance Report: Plug the USB ash drive in the device. In the Report interface, select a table type to export. Press the OK key to export the aendance report to the USB ash drive. The available USB ash drive format is FAT32. The device will automacally check the USB ash drive memory. If there is no enough space for exporng, a prompt will be displayed. You are able to congure the record over threshold prompt and record delete funcon in the System interface. Record over Threshold Pop up Prompt (%): If the aendance record memory reaches the congured value, the system will pop up a prompt to remind you. If congure the threshold to 99%, the system will pop up a prompt to remind you to delete the aendance data when the capacity reaches the threshold. The available value: 1 to 99. Record Delete: When the funcon is enabled, the terminal will delete the rst 3000 aendance records when the memory is full, in order to save the new aendance records. By default, the funcon is enabled. See Secon 5.2 Aendance Record Delete Rule in the User Manual of Fingerprint Time Aendance Terminal. View License: You can view the device License via the website: hp://opensource.hikvision.com/Home/List?id=46 Regulatory Information FCC Information Please take aenon that changes or modicaon not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separaon between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operaon. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU. 2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collecon points. For more informaon see: www.recyclethis.info 2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentaon for specic baery informaon. The baery is marked with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated collecon point. For more informaon see: www.recyclethis.info Use only power supplies listed in the user instrucons:
Model Manufacturer Standard DSA-12PFT-12FUK 120100 Dee Van Enterprise Co., Ltd. DSA-12PFT-12FAU 120100 Dee Van Enterprise Co., Ltd. DSA-12PFT-12FIN 120100 Dee Van Enterprise Co., Ltd. DSA-12PFT-12FUS 120100 Dee Van Enterprise Co., Ltd. DSA-12PFT-12 FBZ 120100 Dee Van Enterprise Co., Ltd. BS AS IS IEC NBR Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to the following two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operaon of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitaon est autorise aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepble d'en compromere le fonconnement. Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce potenal radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communicaon. Conformment la rglementaon d'Industrie Canada, le prsent meeur radio peut fonconner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'meeur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intenon des autres ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communicaon sasfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et ulis une distance minimale de 20 cm entre le radiateur et votre corps. Scan the QR code to get the user manual for detailed informaon. Note that mobile data charges may apply if Wi-Fi is unavailable.
This product uses the FCC Data API but is not endorsed or certified by the FCC