Samsung SEW3037W Baby Monitor User Manual

 

http://www.emc2000.co.kr Appendix 6. FCC TEST REPORT Report No.: EMC-FCC-R0074 User manual EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. SafeVIEW User Manual SEW-3037W If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product. English SEW-3037W-ENGLISH.indd 1 2012-08-17 4:34:23 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturers 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. apparatus (including amplifiers) that produce heat. instructions. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lighting storms or when unused for 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. long periods of time. SafeVIEW User Manual Copyright 2012 Samsung Techwin Co., Ltd. All rights reserved. is the registered logo of Samsung Techwin Co., Ltd. Trademark The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the users own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice. SEW-3037W-ENGLISH.indd 2 2012-08-17 4:34:23 SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS interference received, including interference that may cause undesired operation. FCC Caution :

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and (2) this device must accept any Note :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and monitor. Connect the equipment into an outlet on a circuit different from that to which the monitor is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided. Some adult assembly or installation required. This product contains small parts that may cause choking. Keep small parts away from children. This product is NOT intended to replace proper supervision of children. You MUST check your Before using this product, read and follow all instructions contained in this booklet, and read and childs activity regularly, as this product will not alert parents to silent activities of a child. follow all instructions and warnings on the product. basement, etc. NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet This product is intended for indoor use only. This product is not intended for use as a medical monitor and its use should not replace adult supervision. The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, if may not be able to detect sounds from him or her. It is essential that you check the operating range and condition of the transmitter monitor on initial installation, and on a regular basis after that. Check reception regularly. Test monitor before use and after changing camera location. The wireless signal transfer range may be shortened if an obstacle such as a concrete wall is in between the camera and monitor. To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. Use only the AC adapters provided with the product, as other adapters may damage the product. Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters avoiding pinch points otherwise you can damage the adapters. adapters cord. When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC Do not use extension cords with the AC power adapters to avoid entanglement. This product should only be serviced by qualified and authorized Samsung service centers. Images and sounds are transmitted by the product over public airwaves and transmissions may Caution if you use the system to watch a young child, do not place the camera where the child When using the system with only battery power and the charge is low, then the picture and or If this occurs then please connect the AC power adapter. be picked up by other units. can reach. sound may affected. SEW-3037W-ENGLISH.indd 3 2012-08-17 4:34:23 INSTALLATIoN how to Install 13 Wireless Monitor 13 Wireless Camera 13 APPeNdIx Specifications 14 Troubleshooting 15 Contents WhATS INCLuded Package Contents 5 GeTTING STArTed Functional description 6 Powering your monitor 6 Operating the System 6 VIeWING Mode dISPLAy Indicator description 8 How to use the indicator 8 Menu operation 8 How to use the setup buttons 8 How to use the setup icon 9 oVerVIeW Getting to know your Monitoring system 10 Wireless Monitor 10 Wireless Camera 12 SEW-3037W-ENGLISH.indd 4 2012-08-17 4:34:23 Whats Included Package Contents The system comes with the following components:

Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA) Check your package to confirm that you have received the complete system, including all components shown above. 0 1 W h a t s I l n c u d e d SEW-3037W-ENGLISH.indd 5 2012-08-17 4:34:24 English 5 operating the System The basic operation is as follows:

Pairing The units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign. Up to 4 Cameras may be paired. 1. Power on and turn the switch ON. 2. Press the [MeNu] button on the monitor. 3. Select [

] by pressing [_] or [+] button. 4. Select camera number by pressing the [$] or [%] button. Press [

The power LED for the monitor should be ON.

] button to confirm. A pairing icon comes out and search a camera which sets to pairing mode. A count down clock appears at the middle of top icon bar which starts counting from 30 to 0. 5. Press the [PAIr] button on the camera. 6. Within 30 seconds, if the monitor successfully pairs with the camera, the monitor n ` After 30 seconds, if no camera registered, it will show Out of Range icon and user will automatically switch to the camera's current view. needs to switch back to previous camera number through menu operation. GettInG started Functional Description Powering your monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Wireless Monitor You can use the device while charging with connected adapter, and the device is portable if charged. Wireless Camera The Wireless Camera must be plugged in at all times in order to view. n ` Check if the Power LEDs of wireless monitor is turned on. 6 Getting Started SEW-3037W-ENGLISH.indd 6 2012-08-17 4:34:24 SEW-3036W Voice activated (Vox) Select to monitor significant sound with reduced ambient noise. The screen goes off in Vox mode if there is no significant sound louder than a certain level within 1 minute. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In Vox mode, you can set the sensitivity with [

H(High) : Sets to higher sensitivity. L(Low) : Sets to lower sensitivity. Sleep Mode Press the [SLeeP] button to turn off the screen and save battery power. Your monitor will continue to detect sound around the camera. Press any button to turn the screen on again.

] in menu. out of range If the camera and monitor are not paired or if the monitor is outside of transmission range with the paired camera, the out of range message appears with warning beeps at regular intervals. SEW-3036W Two-way talk Press the [TALK] button while talking. TALK Sound level The louder the sound around the camera, the more LEDs turn on. SEW-3036W 0 2 G e t t i n g S t a r t e d DC IN 6V Portable monitoring Slide the belt clip upwards to use the integrated belt clip on the monitor. When not in use, please push the clip back to its original position.

- O N

- V O X F

- O F Night Light Press the [

the wireless monitor to turn on/off night light.

] button on the camera or the [

] button on remote PTZ You can remotely control the camera to pan, tilt and digitally zoom. Use [$/%/_/+] buttons on the monitor to control the camera. Use [

] from the menu to digitally zoom in. SEW-3037W-ENGLISH.indd 7 2012-08-17 4:34:26 English 7 VIeWInG Mode dIsplay Indicator Description how to use the indicator a b c d e gf h i j a Signal Indicator The signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal One or no bars indicate the signal is poor, and 5 bars indicate a strong signal. b Camera Number Indicates which camera is being displayed on the current screen. When scan mode is selected, this icon will flash. c x2 Zoom mode Indicates that current screen is Zoomed in. Use the four directional buttons to pan the camera. Select x1 in the menu to zoom back out. d Night Vision Indicator Indicates camera night vision mode is turned on. The screen will appear in Black/White in this mode. 8 Viewing Mode Display e digital Clock Displays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format. f Night light Indicates the night light is on. g Monitor Speaker Mute Indicates the monitor speaker is muted. Once the monitors speaker is muted, no sound from the camera is produced. h Vox on Indicates the Power / VOX slide switch position is set at Vox mode. i Battery Capacity Level Indicates remaining battery charge. Indicated in 4 levels, and one discharge warning. j Charging Indicates the battery is charging by DC input power. If battery nearly empty, it will flash to alert user to charge up the unit. No Signal Warnings The "out of range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power. Menu Operation how to use the setup buttons Press the [MeNu] button of the monitor to display the menu screen. Use [$/%/_/+] button to traverse the menu, and press [

changes.

] button to apply the SEW-3037W-ENGLISH.indd 8 2012-08-17 4:34:27 SEW-3036W SEW-3036W SEW-3036W Enter menu setting Move to a Adjust level menu Save the change 1. Press [MeNu] button to enter the menu setting or exit the menu setting. 2. Move to other menu by press [_] or [+] button. 3. Adjust option level by [$] or [%] button.

] button to save and complete. 4. Press [

n ` If no action more than 20sec, it will be time out back to monitor mode with save. how to use the setup icon a b c d e f g h a Brightness Adjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera. b Camera Vox Sensitivity If not in Vox mode, oFF is displayed and not to be selected. In VOX mode, you can select h (High) or L (Low). If set to h, monitor can be triggered by lower audio level than L setting. c Pairing You can register a wireless camera with the monitor using the registration menu where you can view the video of the selected wireless camera. d Zoom Zoom in on the current image (2x). If you are using multiple cameras, you can set the zoom for each camera. e Select Camera to View and Scan Mode Set which camera is being currently viewed. Each time a different camera is selected, the Brightness, VOX Sensitivity Level, Camera Speaker Volume, and Zoom settings will be saved to that specific camera. If SCAN mode is selected, each of the registered cameras will be viewed in ascending order at 10 second intervals. If one or more cameras are turned off or out of range, the monitor will show the out of range indicator for the 10 seconds for that particular camera. f Set Camera Speaker Volume Adjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest. If MuTe is selected, no audio will be transmitted to the speaker when the [TALK] button is pressed. g Time Setting Set the time shown on the monitor. Use the [_] or [+] button to select a field. Use the [$] or [%] button to change the numbers in the selected field. h reset Choose <yeS> to reset the monitor to factory defaults. All settings including time and paring information will be set to the factory defaults. 0 3 i i V e w n g M o d e d s p a y i l SEW-3037W-ENGLISH.indd 9 2012-08-17 4:34:29 English 9 SEW-3036W oVerVIeW Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls Monitor Antenna Receives and sends signals from or to the camera. 3.5 LCd Screen Displays video from the camera. Sound Level Leds Flashes when sound is detected. Power Led Indicator turns green when powered. When battery is charging, this LED will in green color. MeNu Button Press to access from video monitor mode to menu mode operation. In menu mode, press this button will go back to monitor mode with save from selection. SLeeP Button Used to turn on / off the screen by press this button. User can turn on the video again by pressing any buttons. Microphone Transmits audio to the camera when [TALK] button is pressed down and held like a walkie talkie. Navigation Controls / oK/Night light Button Use the controls to move and select while in Viewing Mode, Menu Mode. You can control PTZ operation. Button Navigation Controls /

Viewing Mode: The following controls are used while watching live video from the camera:

Press the [$] or [%] button to adjust cameras framing upwards or downwards. Press the [_] or [+] button to adjust cameras framing to the left or right. Press [

While in zooming, use [$/%/_/+] button to move the screen around.

] button to turn on/off the night light. Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode.

] button to confirm the menu selection. Press the [

10 Overview SEW-3037W-ENGLISH.indd 10 2012-08-17 4:34:30 Back Controls TALK Button Press down and hold the button to talk back to the camera currently being displayed on the LCD screen. Speaker Produces the sound transmitted from the camera(s).

- O N

- V O X F

- O F Kick Stand Use to hold the monitor onto a table. DC IN 6V n ` You must have more than one camera configured on the system when using the functions that requires more than one camera. Side Controls 0 4 o v e r v e w i Power and Vox oN / oFF Slide Switch Set this switch to ON or OFF to turn on/off the wireless monitor, and set to VOX to turn on the VOX mode. dC 6V Power Input Connect the included AC power adapter to power and/or charge the monitor battery.

(when the monitor is not placed in the optional Charge cradle). English 11 Wireless Camera Front & Back Controls Ir Leds Infrared LEDs provide viewing in no / low light conditions. Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. Speaker Produces the sound transmitted from the monitor. n ` Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor. Side & Bottom Controls Power Slide Switch Turns the camera ON or OFF. Night vision sensor Detects light levels where the camera is placed. 12 Overview Night Light Button Turns Night Light ON or OFF. When the camera is powered on, Night Light would be automatically turned on. Camera Antenna Sends & receives signals to or from the monitor. dC 6V Power Input Connect the adapter to the camera. PAIr Button Press this button to pair with a monitor. SEW-3037W-ENGLISH.indd 12 2012-08-17 4:34:31 1. Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. 2. Mount the camera to the wall. Mark the position of the screw hole on the wall, and drill hole and insert 1 screw, then firmly attach the camera to the wall by placing the stand over the installed screw and pushing the base downwards. anchor to fix. n ` To install on a concrete wall, drill a hole and use plastic

` Use the drilling template to drill holes on the wall for

` The camera can also be placed on a flat surface, such as a table or shelf, and no camera installation. (Page 17) mounting hardware is required. 3. Adjust the viewing angle of the camera. Use the Pan, tilt control from the monitor to adjust the viewing angle of the camera. n ` Adjusting the camera with excessive force may damage the unit. 0 5 I n s t a l l a t i o n InstallatIon How to Install CAUTION: If you use the system to watch a young child, do not place the camera in the child's reach. Wireless Monitor 1. Place the monitor in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` Do not pull up the stand lever with an excessive force. Wireless Camera Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting permanent installation, verify its performance by observing the image on the monitor when camera is positioned in the same location/position where it will be permanently installed and the monitor is placed in the location where it will be used most of the time. Installation Warnings Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided. SEW-3037W-ENGLISH.indd 13 2012-08-17 4:34:32 English 13 appendIx Specifications Item Operating Frequency Range Transmitting Power Monitor Sensitivity Type of Spread Spectrum TX Type of Modulation Data Rate Transmission range Weight Image Sensor Type Effective Pixel White Balance Lens Viewing Angle (Diagonal) IR LED Type/ Night Vision Loud Speaker Output Power Requirement Power Consumption VOX level detection Operating Temperature Range 14 Appendix Details System General 2400 MHz~2483.5 MHz 17dBm Max

-88dBm FHSS GFSK 3Mbps Outdoor 300 m (Eye of Sight) Gross weight: 930g Wireless Camera 1/5 Color CMOS Image Sensor H: 640, V: 480 Auto EFL=3.6mm, F=2.8 56 degree 8pcs IR LED 940nm / 5m 80dBA DC 6V 10%

480mA Condition Night vision mode, motor in motion and talk back High: 50dBA / Low: 60dBA 0C~+40C Item Operating Humidity Range Environment Rating Pan Angle Tilt Angle Regulation Compliance RoHS Compliance Other Special Feature Weight Display Type/Size Resolution (Pixel) Viewing Angle Number of Camera Support Power Requirement Loud Speaker Output Power Consumption Operating Temperature Range Operating Humidity Range Environment Rating Regulation Compliance RoHS Compliance Other Special Feature Weight Details Wireless Camera 85% RH Indoor use only 300 110 FCC/CE Yes for CE version only Built in Microphone/ Speaker 214g Wireless Monitor Color TFT 3.5 320X240 (RGB) H: 80 degree, V: 100 degree Up to 4 cameras Adapter : DC 6V 10%, Battery : 3.7V Li Ion battery 80dBA 480mA maximum Condition Charging + Speaker with voice at volume 5 0C~+40C 85% RH Indoor use only FCC/CE Yes for CE version only Volume control, Pairing 167g SEW-3037W-ENGLISH.indd 14 2012-08-17 4:34:32 Troubleshooting Problem No picture from a camera The picture is or has become choppy No sounds (even with both units turned on) Solution 1. Check all connections to the camera. Make sure the adapter is plugged in. 2. Make sure that the cameras and monitor are both ON. 3. Make sure that the camera is in range of the monitor. 4. Make sure the camera and monitor are paired. 5. Adjust the monitor antenna to vertical position. The picture may become choppy when experiencing a lower frame rate

(i.e. 10 frames per second vs. a higher 20 frames per second). 1. Try moving the camera closer to the monitor. 2. Remove obstructions between the monitor and camera. 3. Adjust the monitor antenna to vertical position. 1. Make sure that the power adapter is connected to the camera. 2. The battery on the monitor may be dead, be sure to charge it using the 3. The monitor may be out of range of the camera; be sure to check if the adapter included. Range LED in on continuously. This sound is normal feedback which occurs if the monitor and camera are too close together. Move them further apart. Your SafeView is emitting an high pitched noise/

feedback. n ` Low batteries will cause the supply current to become unstable and will affect the quality of the video/audio. Please charge the battery fully for use for superior video. 0 6 A p p e n d x i English 15 SEW-3037W-ENGLISH.indd 15 2012-08-17 4:34:32 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwins devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. SEW-3037W-ENGLISH.indd 16 2012-08-17 4:34:32 TEMPLATE This template is used to install the camera on the wall. Screw holes for the Camera installation CAMERA FRONT SEW-3037W-ENGLISH.indd 17 2012-08-17 4:34:32 SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 SEW-3037W-ENGLISH.indd 18 2012-08-17 4:34:32