SNR73207W 4 Channel Wireless NVR User manual SNR-73207W rev2

 

NETWORK VIDEO RECORDER User Manual SNR-73207W Overview of NVR CONTENTS OVERVIEW OF NVR 2 2 3 4 5 6 7 8 8 Contents Safety Instruction Front Panel Rear Panel Remote Controller Install Hard Drive Connect external equipment Connect NVR NVR BOOT UP 9 NVR MENU 14 SEARCH 34 WISENET CLIENT 38 APPENDIX 52 9 System Initialization 9 Login 9 Startup Wizard 12 Main Interface 14 Popup Menu 15 Main Menu Guide 16 Setup 23 Registering with DDNS 33 SHUTDOWN 33 Menu Lock 33 Switch User 33 Split Mode 33 Record Search 33 Start Sequence 34 Search 38 System Environment Requirements 41 Wisenet Client Login 41 Live Interface 52 Troubleshooting 54 Specifications 56 Dimension 57 Open Source Announcement 2_ Overview of NVR SAFETY INSTRUCTION Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Please use the power supply enclosed or specified by the manufacturer. 2. Never push objects of any kind through openings of NVR so as to avoid electric shock or other accidents. 3. Do not put the equipment in a dusty location. 4. Do not place the equipment under the rain or humid environment like the basement. Never operate the equipment by using unspecified power supply. If the equipment is accidentally in contact with water, please unplug the power cable and immediately contact technical support. Use a soft damp cloth to clean the outer case of the NVR. (Do not use liquid aerosol cleaners.) If there is a strange smell or sound from the NVR, unplug the power cable and contact technical support. 5. Keep the surface of the equipment clean and dry. 6. Do not operate if any problems are found. 7. Do not try to remove the NVR cover to avoid electrical shock. 8. Handle with care. If NVR does not work properly, please contact technical support for repair or replacement. 9. Install and place the equipment in a well ventilated area. The NVR system includes a HDD, which produces large amount of heat during operation. As a result, do not block the ventilation vents (on the top, bottom, sides and the back of the NVR). 10. The power adapter should only be connected to the NVR. Do not connect it to additional equipment or else the NVR may restart repeatedly due to insufficient power. 11. Do not install near any heat sources such as radiator, stove, and other machinery or devices (including speakers) that produce large amount of heat. 12. If the provided plug does not fit your outlet, please technical support for assistance. 13. Protect the power cord from being walked on or pinched particularly at the plug level and each ends of the 14. Only use attachments/accessories specified by the manufacturer. 15. Only use the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the system. 16. Unplug the device during lightning storms or when unused for long periods of time. 17. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is broken, liquid has been spilled or objects have fallen onto the device, exposed to rain or moisture, does not operate normally, or has been dropped. Standards Approvals When a cart is used, use caution when moving the cart and the device to avoid injury from tip-over. cord. J ` Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. M ` This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. English _3 OVERVIEW OF NVR-For This device must not be co-located or operation in conjunction with any other antenna or transmitter except complying with IC multi-transmitter requirements.

-For camera This equipment complies with FCC / IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

-Pour la Ce dispositif ne doit pas etre situe a proximite ou a l'exploitation en conjunction avec une autre antenne ou emetteur, sauf conforme aux exigences IC multi-emetteur.

-Pour la camera Cet quipement est conforme aux limites dexposition aux rayonnements FCC / IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This radio transmitter 21482-SNR73207W has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum allowed gain indicated. Antenna types not included in this list whose gain is greater than the maximum gain listed for all types listed are strictly prohibited for use with this device Le prsent metteur radio 21482-SNR73207W a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. Antenna Information Informations sur l'antenne Antenna name : 2.4G SMA Antenna Nom de l'antenne: 2.4G SMA Antenna Frequency Range : 2400 ~2485 MHz Gamme de frquence: 2400 ~ 2485 MHz Impedance : 50 () Impdance: 50 () Gain(dBi) : 5.50 dBi Gain (dBi): 5.50 dBi Connector Type : SMA Type de connecteur: SMA Polarization : Linear,Vertical Polarisation: linaire, verticale FCC/IndustryStatementExposureCanadaRF FRONT PANEL NVR is short for Network Video Recorder. a b c USB d e Type Status lamp IR port USB port a b c d e Key or indicator REC indicator Network indicator Power indicator USB Identification REC NET PWR USB Functions If the "Red" indicator flashes, the hard drive is being read or written to.

` The red light will illuminate when HDD is installed. Display network connection and data transfer status. If the "Blue" indicator is on, NVR is getting power normally. Receive IR signal from Remote Controller. USB port 4_ Overview of NVR Overview of NVR REAR PANEL SNR-73207W b WAN VGA HDMI CAUTION RISK OF ELECTRI SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE. a c d e f g Physical Interface a Ground connection b Antenna c WAN: (RJ45) Network port d VGA port e HDMI f USB port g Power port Connection A terminal to connect a separate ground cable.

` Make sure to add a ground cable in order to use the equipment safely. Receive signal from wireless camera. Connect with WAN, Ethernet cable. Connect with VGA display devices, such as PC monitor. Connect with HDMI display devices, such as PC monitor. Connect with USB. Connect with the power supply DC12V 2A, included with the device English _5 OVERVIEW OF NVR REMOTE CONTROLLER Operation of remote controller Channel select Numeric key ALL Multiple display mode SEL Select key/Edit key Left/Right key; Decrease/Increase parameter value of control bar. Rewind key Enter into record search menu/Play key Record key M ` There is no function of Mute button.

` SNR-73207W is a 4 channel NVR. Please press 1 to 4 key to select channel. Numeric key MENU Enter into Main menu/Exit SUBMENU Go to Submenu Up arrow key Down arrow key Forward key Stop manual record; stop playing Pause key 6_ Overview of NVR Overview of NVR is operating. INSTALL HARD DRIVE M ` HDD is pre-installed. If you want to replace hard disk drive, please refer to the following instruction. Please do not remove the hard drive when NVR Installation of Hard Drive 1. Using a screwdriver, remove the screws from the side and back panels. 2. Remove the top cover. 3. Connect data and power cables of hard drive to the motherboard. Mount the hard drive by mounting it onto the rack and connecting the power and data cables. 4. Multiple groups of screw mounting holes are provided on the bottom of the NVR. Screw the hard drive in place according to the size of your hard drive. HDMI VGA WAN CAUTION RISK OF ELECTRI SHOCK CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE DO NOT OPEN PARTS INSIDE. REFER SERVICING TO QUALIFIED WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED SERVICE PERSONNEL. FOR OUTDOOR USE TO RAIN OR MOISTURE. 7 WAN HDMI VGA 1 CAUTION RISK OF ELECTRI SHOCK CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE DO NOT OPEN PARTS INSIDE. REFER SERVICING TO QUALIFIED WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED SERVICE PERSONNEL. FOR OUTDOOR USE TO RAIN OR MOISTURE. NET REC PWR USB USB PWR REC NET English _7 OVERVIEW OF NVR CONNECT EXTERNAL EQUIPMENT Connect your monitor to the NVR using the VGA or HDMI video cable. Connect NVR to the power supply adapter provided. After all connections are completed, plug the NVR in to perform function checks.

` The appearance of power adaptor differs depending on sales region. CAUTION RISK OF ELECTRI SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE. CONNECT NVR WAN VGA HDMI HDMI VGA WAN CAUTION RISK OF ELECTRI SHOCK CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS. NO USER SERVICEABLE DO NOT OPEN PARTS INSIDE. REFER SERVICING TO QUALIFIED WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED SERVICE PERSONNEL. FOR OUTDOOR USE TO RAIN OR MOISTURE. M ` Images may differ depending on the model.

` Cameras shape can be different depending on AIO Kit you purchased. 8_ Overview of NVR Overview of NVR NVR Boot up SYSTEM INITIALIZATION After connecting the NVR power cable to wall outlet, the NVR system initializing screen will appear. M ` It may take 40 seconds to start up, and the screen may beep 5~6 times. changed your password, enter your new password. LOGIN 1. The login dialog appears. 2. The password setting window appears for the first time. If you have 3. Click the [Apply] button. M ` Please create a user name and password for your device. Password MUST be 8~13 characters long. When password is 8~9 characters long, it should be with at least a combination of letters, digits and special symbols. If it is 10~13 characters long, it should be with at least a combination of two types of characters. 4 or more contiguous or repeated characters or key arrangement are prohibited, for example 1111, 1234, abcd, qwerty. STARTUP WIZARD After the NVR startup is complete, the startup wizard will display. Wizard setting menu includes: Network, Date/Time, Disk, Resolution, Mobile and System summary. English _9 NVR BOOT UP Use Virtual Keyboard

> again to switch to input of special characters. The virtual keyboard is used in the same way as with physical Virtual keyboard window will be displayed for input. Click on the desired characters to apply them. Press <

input of upper-case letters. Press <

keyboard. For input of password, use letters and special characters other than <\> and <">. 1. Network (DHCP): In DHCP mode the router will automatically assign an IP address to NVR. If the NVR fails to obtain an IP address, refer to the NVR Router Guide. If the problem still cannot be resolved, contact technical support.

> to switch to 2. Date/Time: Set the date, time, date format, time, NTP, DST. 3. Disk: Any new disk connected must be formatted before use. Click on "Select" to highlight the hard drive to be formatted. Click on

"Format HDD" and the user login box will appear. Enter the password to log in. Click on "OK" to format the disk when the "Entire Data Will Be Erased. Do You Want To Continue?" dialog box appears. Formatting process is complete when the progress bar is full. 10_ NVR Boot up NVR Boot up 4. Resolution : Select the resolution for the VGA output or HDMI output of your monitor. 5. Mobile : If you scan a QR code using WiseView, the device ID displayed in the NVR will be automatically reflected in the Mobile Viewer ID, and you can use the Mobile Viewer immediately by entering the password of the NVR. 6. Summary : Shows system and network status of NVR. 7. Click on "Finish" to finish setting of startup wizard. M ` You can click on "Don't show this window next time" if you do not wish to have the wizard setting to appear next time. English _11 NVR BOOT UP MAIN INTERFACE In real-time preview mode: right click on any area to access the desired menu. Right click on it to open a context menu, whose menu items may vary depending on the specific condition, such as sign-in, sign-out, split screen mode and various operation conditions. Left click on any channel to access shortcut menu, where operations such as image capture, recording and image zoom-in are available. a b c d e jihgf k f h l m on p qrs The video recording marks are as shown below:

: means common Recording.

: means Motion detection recording.

: means PIR detection. The PIR sensor might not work if there is a window or it rains. Component Name Function a Channel Name b Date & Time c The WiFi signal icon d Video Loss e Manual Recording f Manual Capture g Instant Playback h Zoom i Color Setting Display channel name Display current date and time The level of the signal, strong or weak. Wireless Camera is off-line. Enable or disable manual recording Make a snapshot of current video Make playback of the last 5 minutes of the video Hold and drag mouse cursor to select a frame of current video to zoom in. Set hue, brightness, contrast and saturation of current channel. 12_ NVR Boot up NVR Boot up Component Name j Zoom k Pair l Main Menu m 4-Channel Layout n Auto SEQ o Play p Stream Switch q Connection state Function Hold and drag mouse cursor to select a frame of current video to zoom in. Do the pairing of camera and NVR. If you click the icon of each channel and press the Pair button on the camera within 30 seconds, the camera and NVR are manually paired. Access the main menu Display four channels of video. Press this button to switch the screen mode in sequence. Access video retrieval page. HD or SD optional. Displays the network connection status. connect fail : Not connected WAN. not connect : Not connected physically. connect success : connected WAN. r Manual mode s System Sets manual recording mode. System Information. English _13 NVR BOOT UP NVR Menu POPUP MENU After finishing system initialization, right click the mouse on preview interface or slide the mouse to the bottom of screen to enter into Pop-up Menu. Now you could perform parameter setting and operate on Main Menu, Multi-screen, Record Search, Sequence and Brightness settings. The options in the pop-up menu may vary slightly according to different parameter settings and application environment. The options in the menu will be explained in detail in the following chapters. 14_ NVR Menu MAIN MENU GUIDE Channel Record Alarm Setup Network Device Channel Live Motion Video Cover Record Capture Motion Exception General DDNS Email Disk Cloud Storage General Multi-User System Maintenance IP Camera Maintain Information Wireless Camera Wireless Channel Record Record Schedule Capture Capture Schedule General Port Configuration Email Configuration Email Schedule General Date and Time Output Configuration Log Load Default Upgrade Auto Upgrade Parameter Management Auto Reboot Upgrade Load Default Information Network State English _15 NVR MENU SETUP On LIVE mode, click the mouse left button, or [Menu] button on the remote controller, or click [

the main menu screen. If system interface is locked, refer to page 33 to unlock by entering your password. In Main Menu mode, you can make settings for Parameter, Record Search, Device, System, Advanced and Shutdown.

] icon on the toolbar to enter Channel Wireless Camera Go to "Setup" ; "Channel" ; "Channel" ; "Wireless Camera" to enter into the following menu. Channel : Channel of wireless camera. Pair : Click the channel button to do pairing. White light : Enables the white light illuminator function of the camera. Camera Version : Wireless Camera firmware version. State : Shows the network connection status of the camera. Wireless Channel Go to "Setup" ; "Channel" ; "Channel" ; "Wireless Channel" to enter into the following menu. Region : You can select Region.

- US : The Americas

- EU : Europe

- Others : Other areas Wireless Band Selection : Auto or Manual optional. Auto is recommended. If your video is interrupted and video loss occurs in the Auto mode, change it to the Manual mode, and select a channel with no interference. Wireless Channel Selection : Select the channel in the drop-

down list. 16_ NVR Menu NVR Menu Live Go to "Setup" ; "Channel" ; "Live" to enter into the interface. Covert : Enable/Disable Video hiding. Channel Name : Set the channel name to be displayed on the live screen. Show Name : Showing Channel name Date Format : Select the date format to be displayed on the live screen. Time Format : Select the time format to be displayed on the live screen. Record Time : Enable or disable displaying system time in recording. Signal Strength : Select whether to display the network signal strength on the live screen. RGB : Adjust the chromaticity of video Brightness : Adjust the brightness of video Contrast : Adjust the contrast of video Saturation : Adjust the saturation of video M ` Click [

] to display the detailed setting window. English _17 NVR MENU Motion Go to "Setup" ; "Channel" ; "Motion" to enter into the interface. Channel : Select Channel. Use : Sets the use of motion detection. You can select either Motion only or Motion And PIR. Sensitivity : Support 1-8 level, 8 is the highest level. Motion Zone : Set an area where motion is detected. M ` The PIR sensor might not work if there is a window or it rains.

` Click [

] to display the detailed setting window. Video Cover Go to "Setup" ; "Channel" ; "Video Cover". Privacy Zone is to block certain area(s) in the camera's field of view on live video of selected channel. 1. Click Enable Privacy Zone and select the number of the 2. Adjust the position and zone of the Area(s). You can adjust the range of the privacy zone by clicking and dragging the lower right corner of each area box. 3. Click "Apply" to save the setting. Area(s) to be blocked. 18_ NVR Menu NVR Menu Record Record Go to "Setup" ; "Record" ; "Record" ; "Record" to enter into the interface. Record : Enable/disable record Resolution : Set the desired recording resolution. Video Encode Type : Select the video compression method. Record Schedule Go to "Setup" ; "Record" ; "Record" ; "Record Schedule" to enter recording schedule for the NVR. Schedule interface Select the channel and the date to be set. One week's schedule can be set. The record schedule of the current channel can be copied to any other channel or all channels. After selecting either "Normal" or "Motion", click the boxes you want or drag over multiple boxes of the time you want to fill/unfill the selected boxes with color. The color-filled boxes indicate that the Record Schedule of the selected channel is set. M ` In the Record menu and Record Search menu, when no colors are presented, it means there are no recordings during that time;

` Green stands for normal record and yellow stands for motion record. English _19 NVR MENU Capture Go to "Setup" ; "Record" ; "Capture" ; "Capture". Channel : Select capture channel Enable Capture : Enable/Disable auto capture. Stream Type : Select MainStream or SubStream. lnterval : 4s / 8s / 25s / 1Min / 10Min / 30Min / Hour Manual Capture : Enable/Disable manual capture M ` You can click on the icon [

the image with your mouse.

] in the live window to manually capture Capture Schedule Go to "Setup" ; "Record" ; "Capture" ; "Capture Schedule". Normal : Conventional capture setting Motion : Motion detect capture setting After selecting either "Normal" or "Motion", click the boxes you want or drag over multiple boxes of the time you want to fill/unfill the selected boxes with color. The color-filled boxes indicate that the Capture Schedule of the selected channel is set. 20_ NVR Menu NVR Menu Alarm Motion Go to "Setup" ; "Alarm" ; "Motion" to enter into the interface. Buzzer : When detecting object moving, buzzer makes alarms

(disable, 10 seconds, 20 seconds, 40 seconds and 60 seconds). Record : When object motion is detected, the record channel setting will be activated. Post Recording : After the alarm finishes, the duration time of the alarm recording can be set as 30 seconds, 1 minute, 2 minutes and 5 minutes. Show Message : Messages will be displayed on the screen when moving object is detected and alarms are made. Send Email : When moving object is detected, send Email to the specified Email address. Full Screen : When moving object is detected, messages will be displayed in full screen. Exception Go to "Setup" ; "Alarm" ; "Exception" to enter recording schedule for the NVR. Event Type : Support three abnormal types: No Space on Disk, Disk Error and Video Loss.

- No Space on Disk : Alarm will appear when there is no free space in the HDD of the NVR.

- Disk Error : Alarm will appear when the HDD does not work due to damage, power failure.

- Video Loss : When the NVR fails to receive video signals due to some problems (camera damage,wireless signal is weak, power failure), the alarm will appear. Use : Active alarms for abnormal situations. Buzzer : How long the buzzer will sound (10s, 20s, 40s, 60s). Show Message : You can set show message on the screen when alarm is detected. Send Email : Select to send Email to specified Email address when abnormal events appear. English _21 NVR MENU Network General Go to "Setup" ; "Network" ; "General" ; "General" to enter the interface. Select the network connection option (DHCP, Static) to set the port. User can view and do the recording, playback or backup of the video remotely. Take DHCP as an example. In this mode, the router automatically assigns IP address for the NVR. After restarting the NVR or DHCP server, the IP address obtained by the NVR may be different. As a result, you need to check the IP address and port numbers before remote access to the NVR every time. The operation procedure is as follows:

1. Select DHCP, click Save and restart the NVR. Input Client Port For Static and DHCP, after setting the IP address for the NVR, the extranet port shall be mapped in the router before visiting NVR through public network. M ` Save the setting to apply the changes made. If there are multiple NVRs in and Web Port (the two ports must be different). a LAN, make sure their MAC addresses are different. Port Configuration Go to "Setup" ; "Network" ; "General" ; "Port Configuration" to enter the interface. Web Port : This is the port that you will use to log in remotely to the NVR (e.g. using the Web Client). If the default port 80 is already taken by other applications. Please change it. http://Public network IP: Web port number (such as 80) Client Port : This is the port that the NVR will use to send information through. If the default port 9000 is already taken by other applications, please change it. Quick Connect : If you want to log in remotely (WAN) to the NVR using Web Client, you need to complete the port forwarding. Enable this option if your router supports the Quick Connect. You need to enable Quick Connect both, on NVR and router. In this case, you do not need to configure manually port forwarding on your router. If your router does not support Quick Connect, make sure the port forwarding is completed manually. (Web port and Client port) DDNS Go to "Setup" ; "Network" ; "DDNS" to enter into the menu interface. User may set DDNS in any one of the above 3 network connection types after applying dynamic domain service. User may remotely access the NVR through domain by using browser in the form of http://applied domain: mapped HTTP port number. When using DDNS domain name to access the NVR, user must confirm that the port can be normally connected to current IP on the public network and the settings for server address/host name/user/password/

setting should be consistent with the NVR local setting. 22_ NVR Menu NVR Menu Server : Select dynamic domain name server provider. Available domain name servers (HANWHA-SECURITY, DDNS_3322, DYNDNS, NO_IP, CHANGEIP, DNSEXIT) Domain: dynamic domain name of the host obtained from dynamic domain name service provider upon registration, for example, http://ddns.hanwha-security.com/snb5000 User : The user name registered upon application for dynamic domain name. Password: The password set upon registration. Click on "Test DDNS". If connection succeeds, it will be indicated that "DDNS Test is Successful!"

Perform remote access to the NVR by using dynamic domain name, for example, http://ddns.hanwha-security.com/

snb5000:HTTP port number (e.g. 19010) REGISTERING WITH DDNS To register your product with the Wisenet DDNS 1. Visit the Wisenet DDNS web site (http://ddns.hanwha-security.com) and sign in with a registered account. 2. From the top menu bar, select <MY DDNS>. 3. Click the [Register Product] tab. 4. Select DDNS button. 5. Enter the product ID. 6. Select a <Type> and specify the <Model>. 7. Specify the product location with a description if necessary. 8. Click [Product Registration]. The product will be added to the product list that you can check. English _23 NVR MENU Email Email Configuration Go to "Setup" ; "Network" ; "Email" ; "Email Configuration" to enter into the menu interface. Receive or Send NVR alarm Email and set parameters like Email address, SSL, Email Enable, and Interval. Encryption: Disable, SSL, TLS and Auto optional. Auto means it can detect the encryption type automatically. It is recommended to set the encryption type as Auto. SMTP Port: Mail sending port used by SMTP (Simple Mail Transfer Protocol). Server is generally Port 25 or Port 465 when SSL is used by Gmail. SMTP Server: Enter the address of the server for the mailbox in use. User Name: Enter a server to connect to. For example, email

"aaa@gmail.com" should correspond to server "smtp.gmail.com"

Password: Enter the password of the SMTP server user. Sender: Sender's mail address, which must correspond to the server used. For example, mailbox "aaa@gmail.com" should correspond to server "smtp.gmail.com". Receiver 1/2/3: Recipient's mail address, used to receive alarm image and message from NVR side. If system alarms continually and sends email images frequently, save the images to another location or remove them, so as to avoid excessive space occupation and thereby affect your normal use of mailbox. Interval: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short, email server may deem mails as junk mails, so they cannot be transferred normally. Mailbox Setting:

For example, if you are using Gmail, sign in to the GMAIL mailbox. https://mail.google.com 24_ NVR Menu NVR Menu Click on "settings--Forwarding and POP/IMAP"

Click on "Enable IMAP--Save Changes"

E-mail Schedule Go to "Setup" ; "Network" ; "Email" ; "Email Schedule" to make Email schedule. Select the channel and the date to be set. One week's schedule can be set. The record schedule of the current channel can be copied to any other channel or all channels. After selecting either "Motion" or "Exception", click the boxes you want or drag over multiple boxes of the time you want to fill/unfill the selected boxes with color. The color-filled boxes indicate that an email will be sent when motion is detected or an exception occurs on the selected channel. M ` Blue stands for Motion: Email will be sent in case of object motion;

` Green stands for System: Email will be sent in case of System, e.g. No Space on Disk, Disk Error, Video loss, etc. English _25 NVR MENU Device Disk Go to "Setup" ; "Device" ; "Disk" to enter into the interface. When HDD is connected, the system will automatically detect if the HDD is OK or not; if the HDD needs to be formatted, select the HDD and format it. If the system detects the HDD is OK, the HDD status will be shown as "Normal". No. : Number of HDD connected to system. Model : Displays HDD model name. Serial NO. : Displays the HDD serial number. Firmware : Displays the HDD firmware version. State : It shows the current status of the HDD. It will be available only when the HDD is "Normal". Free/Total : Remaining or total space of the HDD. Select : Check this to select the HDD to format. Overwrite : When set to ON and the hard drive is full, the NVR will overwrite the oldest files on the hard drive. When set to OFF and the hard drive is full, the NVR will stop recording. Format HDD : Format HDD for the first use. M ` Recording can only be performed when the HDD is in "Normal" state. Cloud Storage Cloud Storage : It can upload the captured pictures to Dropbox at normal time, or when motion detection happens. 1) To use the cloud backup, you need to register your email first. For the detail, please refer to the page 24. 2) Register an account on https://www.dropbox.com/. 3) Configure network to ensure NVR is under network. 4) Configure Cloud: Enable Cloud and set the channel. Enable Motion Detection to have it capture pictures when motion detection happens. 5) Driver Name refers to the name created in the folder of Dropbox and the name can be defined by the user, e.g. CloudNVR000. The folder is to store captured pictures from the NVR. 6) Click [Activate Cloud] to activate Cloud and Email for the user verification will be sent. Click the link in the email and then log in to your dropbox account, and click permit. NVR cloud storage function will be activated. If you have logged in your dropbox account before Cloud storage activation, then no need to relogin. Just click Permit to complete the activation. Please finish the activation within 3 minutes. After activation is completed, you can use the Cloud storage function. 7) Click the icon at the upper-left of dropbox account interface to view the folder made in the 5th step. 8) Open the Dropbox folder to view the NVR captured pictures. 26_ NVR Menu NVR Menu System General Go to "Setup" ; "System" ; "General" ; "General" to enter into the interface. User may set Device Name, Device ID, Language, Auto Logout, Session Timeout and Show Wizard on this page.

` Live restriction : If you want to use the permission setting of Live View when turning the power on/off, please check.

` Session Timeout : The session is disconnected after a set period of time. Date and Time Go to "Setup" ; "System" ; "General" ; "Date and Time". Date and Time User may set Date, Time, Date Format, Time Format and Time Zone. NTP Settings Enable NTP : Enable/Disable NTP function. Server Address : Select NTP server (time.windows.com, time. nist.gov, pool. ntp.org). M ` When NTP function is set to "Enable", system will calibrate the system time at every 00:07:50 and every start-up. DST Settings Enter into the interface to set DST, Time Offset, Start Time and End Time. English _27 NVR MENU Output Configuration Go to "Setup" ; "System" ; "General" ; "Output Configuration" to enter into the interface. Video Output : Live Output SEQ Dwell Time : Sequence time is set 5 seconds by default. User may set it as required up to 300 seconds VGA/HDMI Resolution : For VGA output or HDMI output, the optional resolution includes 1024768, 12801024, 1440900, 1280720, 19201080 Scale and Offset : Sets the scale and offset. Cursor Hidden Delay : Sets the Cursor Hidden Delay time. Cursor Acceleration : Sets the cursor speed. Transparency : Adjust menu transparency in the range of 0-128. Video Format : Sets the NTSC or PAL.

] button to enter into the [User Edit] interface to input Multi-User Go to "Setup" ; "System" ; "Multi-User" to enter into the User interface. It supports up to seven users, including one administrator and six users. Click [

user name and password. User Name consists of 8 characters. Password MUST be 8~13 characters long. When password is 8~9 characters long, it should be withat least a combination of letters, digits and special symbols. If it is 10~13 characters long, it should be with at least a combination of two types of characters. 4 or more contiguous or repeated characters or key arrangement are prohibited, for example 1111, 1234, abcd, qwerty. Set user password. Administer is authorized to set user common user"s authority. Log Search : Allow you check all the system logs. Parameter : Allow you set all the parameters. Auto Reboot : Allow you to update firmware, reboot and shutdown the NVR. Manual Record : Allow you manually start/stop record. Remote Login : Allow you remotely login NVR. SEQ Control : Allow you sequence live screens for all the channels. Manual Capture : Allow you to manually take a snapshot Live : Tick-select the ENABLE "" option and select a channel and the user is allowed to view all the live images in the selected channel. Playback / Backup : Tick-select the ENABLE "" option and select channel for playback/backup, the user is allowed to playback/backup the record in the selected channel. 28_ NVR Menu NVR Menu User Edit User may enable or disable the function or set password. Maintenance Log Go to "Setup" ; "System" ; "Maintenance" ; "Log". User may search log information in different period of time. Click

"Backup" to save all the log information. Load Default Go to "Setup" ; "System" ; "Maintenance" ; "Load Default" to enter into the interface. If [Load Default] is selected, you can initialize the system to the ex-

factory default. Click "Load Default" and select items to be restored. You can restore the Channel, Record, Alarm, Network, Device, System of wireless NVR to ex-factory default. English _29 NVR MENU Upgrade Go to "Setup" ; "System" ; "Maintenance" ; "Upgrade" to enter into the interface. Click Upgrade to enter the Device interface and select the updating file in USB to execute. M ` Do not take out the USB memory or cut off the power during upgrading. When the update is done, system will be automatically restarted. After about 5 minutes, the upgrading will be finished. It is recommended to load ex-factory default after upgrading. Auto Upgrade Go to "Setup" ; "System" ; "Maintenance" ; "Auto Upgrade" to enter into the interface. Click Check to check if there is a newer firmware on remote network upgrade server. M ` To use the Auto Upgrade feature, The network of the NVR must be connected online. please refer to the page 22. Parameter Management Go to "Setup" ; "System" ; "Maintenance" ; "Parameter Management" to enter into the interface. Save Settings : Save the set parameters of user's NVR to the removable storage device. Load Settings : Load parameters in the removable storage device to NVR. M ` To save or load Prameters, a USB flash drive or a mobile storage device with a USB interface must be connected to the USB port of the NVR. 30_ NVR Menu NVR Menu Auto Reboot Go to "Setup" ; "System" ; "Maintenance" ; "Auto Reboot" to enter into the interface. Enable the auto maintenance function to reboot system regularly at every day/week/month. When Auto Reboot is enabled, NVR should be in the main interface and no user operation. M ` The auto maintain function can be effective only when NVR returns back to Preview mode with no any operation within the set auto maintain time. IP Camera Maintain Upgrade Go to "Setup" ; "System" ; "IP Camera Maintain" ; "Upgrade" to enter into the interface. Click to do firmware upgrade of Wireless Camera. 1) Select the camera you want to upgrade. 2) Select the updating file in USB to execute. 3) Click "IPC Upgrade" to do firmware upgrade of Wireless Camera. M ` Do not take out the USB memory or cut off the power during upgrading. Load Default Go to "Setup" ; "System" ; "IP Camera Maintain" ; "Load Default" to enter into the interface. You can initialize the system to the ex-factory default. Select channel to be restored and Click "Load Default". You can restore the color settings, motion detection on/off, motion detection sensitivity and motion detection area of wireless camera to ex-factory default. English _31 NVR MENU Information Information Go to "Setup" ; "System" ; "Information" ; "Information" to enter into the interface. Network State Go to "Setup" ; "System" ; "Information" ; "Network State" to enter into the interface. Displays the network connection status. 32_ NVR Menu NVR Menu SHUTDOWN Click [

] icon ; "Shutdown" to enter into the interface. MENU LOCK In consideration of system safety, user may click the icon [

] on the toolbar when he leaves away from NVR and the system interface will be locked. User has to input Device ID, User Name and Password on the login interface to unlock. In case that the password is forgotten, contact the technical personnel. M ` Administrator has all authorization of menu operation and users have limitations for authorization and have to get authorization from administrator. SWITCH USER User may click the icon [

] on the toolbar when change to user for NVR. User has to input Device ID, User name, and Password on the Switch User interface to switch user. M ` The administrator must set up the user in Multi-User option. For the detail, please refer to the page 28. SPLIT MODE There are many display modes in video channel, including single channel display, SEQ display and split mode. RECORD SEARCH Click [

operating method.

] icon on the toolbar to enter into the Record Search interface to search and playback. Refer to former section for specific START SEQUENCE After set channel sequence time, click Start Sequence icon [

] on the toolbar to start sequence. English _33 NVR MENU Search SEARCH Record Search General Go to "Search" ; "General" to enter into the interface. Search Type: Select the type the playback record. There are three options: All, Normal and Motion. Channel: Select the channel you want to search. Playback Channel: Click a date and select corresponding channel in Playback Channel. The selected channels must not be more than 4. Playback interface: You can use the Playback Control bar to operate the Fast Forward (X2, X4 and X8), Rewind (X2, X4 and X8), Slow play (1/2, 1/4 and 1/8 speed), Play, Pause/Frame. When playback ends, NVR will remain in the playback interface. Time Axis setup, file clip and zoom in/out The NVR supports the processing control bar function when playing back record files. Time Axis zoom: Default value is 24hours. Allow user to select 2 hours, 1 hour, 30 minutes or user-defined. 34_ Search Search ] option, that means the Detailed Operation Fixed time axis: If you select [

processing control bar covers two hour of video content. The time range refers to 1 hour before and after the middle point. Clip and backup: When it is playback, the [

] icon will appear in the Play Control bar. Click the icon to start video clip function, click the icon again to end the function and pop up the dialog. Now, you may save the clipped video file. Zoom out: When it is under single channel playback, the [

]

icon will appear in the Play Control bar. Click the icon to zoom in certain area of the playback screen and right click mouse to return the Playback page. Events Go to "Search" ; "Events" to enter into the interface. In this page, user may search details by date, time, channel and record type. The relevant operations are as follows:

Previous page : Click the button to go to previous page when viewing events (except the first page). When viewing the first page, click this button to display the event list in the first page. Next page : Click the button to go to next page when viewing events (except the last page). When viewing the last page, click this button to display the event list in the last page. Jump : If you click on a number, you will move to that number's page. Two types of backup: Quick Backup and Backup If you want to back up a record in the detailed file list, you may check the checkbox at the left of the record (

means it has been selected) and click "Backup" to enter into "Select backup type" (Make sure USB flash drive or other portable storage device are connected). If you want to back up with USB, select USB and click OK to start processing and you will see the backup progress. After backup finishes, message Backup Finishes will appear at down-right corner. M ` Before backup, connect devices for backup (USB flash drive or other mobile storage devices with USB interface) English _35 SEARCH Play Backup Files M ` To play the backup file, please download and install SVideo Player from www.wisenetlife.com. Use of any other player may cause compatibility problem. 1. Copy backup files to the computer. 2. Open SVideo player and click [ + ] or [

]. For example, if you want to choose *.264, *.avi, *.mp4, add backup file and select a file to play. Play: Click to play file Pause: Click to pause. Stop: Click to stop playback. Frame Forward: step forward by frame Slow Play: Click to play at 1/2, 1/4, 1/8, 1/16 speed. Fast forward: Click to play at 16x, 8x, 4x, 2x speed. Open file/Open Directory Expand/pack up the list. Screenshot: Save path: C:\Users\Administrator\SVideoPlayer\picture Cut: Save path: C:\Users\Administrator\SVideoPlayer\video Full screen display Never on top Always on top On top during playing Window Division 1/4/9/16 channels optional. Add folder or file. Playback mode, Single, Order, Repeat one, Repeat ALL are optional Delete all files in the list. Search File Language/Settings Basic Settings: Set on-top mode 36_ Search Search Capture Settings: Set the path to save image Sub-periods Go to "Search" ; "Sub-periods" to enter into the interface. Picture Go to "Search" ; "Picture"

Support search picture for 5000pcs each time. If the picture number greater than this value, please adjust the date (time) of the current search and search again. In this page, user may search details by date, time, channel and record type. The relevant operations are as follows:

Previous page: Click the button to go to previous page when viewing events (except the first page). When viewing the first page, click this button to display the event list in the first page. Next page: Click the button to go to next page when viewing events (except the last page). When viewing the last page, click this button to display the event list in the last page. Jump: If you click on a number, you will move to that number's page. Two types of backup: Quick Backup and Backup English _37 SEARCH Wisenet Client SYSTEM ENVIRONMENT REQUIREMENTS The minimum requirements for hardware and OS required to run Web Application are given below. Recommended Intel i7 or higher 8GB or more 1000GB or more 4GB or more 1920*1080 CPU RAM Hard Drive Display RAM Display Resolution OS DirectX Direct3D Ethernet Adapter Minimum Intel i3 4GB or more 500GB or more 2GB or more 1280*1024

- Windows 7, Windows 8.1, Windows 10

- Mac OS X 10.13.5 or lower

(Safari 11.1.1 or lower) DirectX 11 Acceleration Function 10/100M Ethernet Adapter WirelessPlugin Download and Installation If your computer system is Windows 7, you may need to setup the user authority for remote control, or you may be unable to backup or record. WIN7 38_ Wisenet Client M ` If the plugins is not downloaded successfully, please check if your browser's safety level or firewall setting is set too high. Please open IE browser ; [Menu Bar] Tools ;

Internet options ; Security ; Internet ; Custom level ; Enable the options. Download and installation of WISENET CLIENT for IE 1. Download WISENET CLIENT at Wisenetlife.com. 2. Locate the downloaded WISENET CLIENT program and double click on it. 3. When the program opens, click the [Next >] button. 4. Click on "Install" in the dialog box "WISENET CLIENT Setup". 5. Upon completion, click the [Finish] button. English _39 WISENET CLIENT 6. Run the WISENET CLIENT to bring up the Login screen. Download and installation of WISENET CLIENT for Mac SAFARI 1. Download WISENET CLIENT at Wisenetlife.com. 2. Locate the downloaded "WISENET CLIENT XXX.dmg" and double click on it. 3. Install the plugin by double clicking on "WebPlugin.pkg". 4. Click on "Continue" > "Install". Enter user name and password for login to Apple computer. Click on "Install" > "Shut down" to finish installation. 40_ Wisenet Client Wisenet Client 5. Run the WISENET CLIENT to bring up the Login screen. WISENET CLIENT LOGIN After plugins installation, please input user name, password and input Client port number. There is an option for opening all channel preview, select it to open all live pictures. Press Login to log in client and remotely visit NVR. The default password is blank and administrator is authorized to modify the password. Set password as per introductions of user management in system setting. After successfully log in, it will enter the real-time monitoring interface and connect video automatically. LIVE INTERFACE Log in and enter into the live interface. English _41 WISENET CLIENT Menu Bar Menu Bar: Live, Playback, Remote Setting, Local Setting and Logout. Live Display Video Control Log in the Web Application Manager, system will be defaulted to enter into <Live> interface. You can click [Play] button to Open/

close live images, on-spot record, capture, and many live display modes. Buttons on a single live interface Channel List : Open the channel list for quick camera function. Click [

Click [

Live Video Stream Options:

- Mainstream: View all live videos using high-quality mainstream video settings.

- Substream: View all live videos using middle-quality substream video settings.

] button to display the Channel List.

] button to hide the Channel List.

: Open or close the images on Live window.

: Stream: Mainstream or Substream optional.

: Click to select how many channels appear on screen at a time.

: Open the video on Live window.

: Close all the Live channels

: Shows the playing video at the original proportions.

: Stretch the playing video to fit the full area for each channel on screen.

: Click to maximize the current window to full screen. Right click to popup menu option and select Exit Full Screen.

: Record switch: the remote record switch of client. Record will be automatically saved to a specified position on PC after the function is enabled.

: Capture the selected live image and save it to a specified position on PC. The image is saved as *.bmp format.

: Digital ZOOM. Video Control Hue: Adjust the chromaticity of video Bright: Adjust the brightness of video Contrast: Adjust the contrast of video Saturation: Adjust the saturation of video 42_ Wisenet Client Wisenet Client Playback Click [

records in NVR HDD. It supports 1 to 4 channel record playback.

] to enter into Playback interface to remotely view the Record Search Record playback procedure Firstly, select the date you want to check and tick 1 to 4 channels. Any record files in current channel at current date will be displayed in the status bar of the interface. Secondly, select record type (Normal record, Motion and All) and channels, and then click [

], and time axis panel will display specific time quantum. On the time axis, red part stands for Motion, yellow stands for normal record and original part stands for no record during this period. Before playback, choose to enable playback 4 channels synchronously. If you tick-select [

separately control the channels playback. Thirdly, start playback Click [

displayed on the time axis screen. Click to locate the record.

], that means the selected channel will playback synchronously; otherwise, you could

] to start record playback. When mouse curse is moving on the time axis, the time point of current position will be English _43 WISENET CLIENT Playback Control Playback control bar Detailed brief description is shown as below:

Key Description Play Pause Stop Frame by frame Record Clip Image Snapshot Download Key Slow playing x1/2,1/4, 1/8, Fast Forward Description x1/2/4/8 Open all the playback channels Stop playing all the playback Digital ZOOM Original proportions Stretch Full Screen

] icon to clip the selected file; and click again to stop the clip function. Then playback clip is Record file clip After opening playback, click [

successfully done. Record clip file can be saved as H.264, AVI or MP4. H.264 is set as default. Snapshot function Move the mouse curse to the channel you want to capture, and click [

icon to capture the live images remotely. After capturing the images successfully, a path prompt box will be popped up. The captured file will be saved as .bmp format.

]

Record file download

] on the control bar to display all the matched record Click download icon [

file according to the search conditions of channels. Tick-select the record file you want to download and click [Start download]. System will download the record file in sequence and save to local PC. The downloading file will be displayed in percentage form. After downloading finishes, "Complete" will be displayed on the status bar. 44_ Wisenet Client Wisenet Client Remote Setting Click Remote Setting to enter into the interface shown, including Display, Record, Alarm, Network, Device and System. Display When you click the <Display> option, sub-options of Display Settings and Schedule are displayed. Channel You can set the IP Channel of the camera. Live Displays the currently playing live screen. Motion You can set the Motion area. PIR Detection You can set the PIR Sensor. English _45 WISENET CLIENT Privacy Zone You can set the Privacy Zone. Record Click <Record> option to unfold its sub-options: Record parameter and Schedule. Camera setup This menu allows you to configure the recording video or network transmission picture quality. Record Record Parameters The parameters should be consistent with NVR local setting. Record Schedule The parameters should be consistent with NVR local setting. Green stands for Normal record; Yellow stands for Motion detection. 46_ Wisenet Client Wisenet Client Capture Capture Channel: Select channel. Stream Type : Select MainStream or SubStream. lnterval : 4s / 8s / 25s / 1Min / 10Min / 30Min / 1Hour Auto Capture: Enable/Disable auto capture. Manual Capture: Enable/Disable manual capture. Capture Schedule Channel: Select channel. Normal: Conventional capture setting. Motion: Motion detect capture setting. Alarm Alarm setting includes Motion Detection Parameters. Motion Configure Sensitivity, Alarm out, Alarm Record and Alarm Capture, etc. Detailed setting should be consistent with NVR local setting. Exception User may configure Event Type, Buzzer, Send Email, Show Message and other parameters. Detailed setting should be consistent with NVR local setting. English _47 WISENET CLIENT PIR Configure Buzzer, Post recording , Send Email, Show Message and other parameters. Detailed setting should be consistent with NVR local setting. Network Unfold <Network> to show its sub-options: Network, DDNS, and Email configuration. General NVR supports Static/DHCP/PPPoE modes. System default network type is <DHCP>. User can set parameters as required. If you change Network type to PPPoE, NVR will automatically restart to make the setting effective. DDNS DDNS: After user applies for DDNS service, you could enable

<DDNS> function under any one network type mode (Static, DHCP and PPPoE). And you may remotely visit the NVR through domain name (http://domain name: HTTP port No.). When visiting NVR by using DDNS, user should make sure port and current IP can be normally connected in public network. Details settings, including server address, host, user, and password, should be consistent with NVR local setting. Click on "Test DDNS". If connection succeeds, it will be indicated that "DDNS Test is Successful!

48_ Wisenet Client Wisenet Client Email Email: Set NVR alarm Email configuration parameters, including Email address, Encryption, Email Enable, and Interval etc. Detailed parameters should be consistent with NVR local setting. HTTPS Enable : Enable/Disable Certificate Type : Default/Custom Device Click <Device> to unfold its sub-options: HDD HDD User may check HDD status of NVR and overwritten time. Detail setting should be consistent with NVR local setting. Cloud Storage User may set the relevant parameters of Cloud Storage. Detail setting should be consistent with NVR local setting. English _49 WISENET CLIENT System Click <System> option to unfold its sub-options: General, Users and Info. General User may check NVR language and video system and date format, menu display time, DST and NTP parameters. Detailed setting should be consistent with NVR local setting. Users User may configure user name and password and detailed setting should be consistent with NVR local setting. Maintenance Load Default User may remotely restore default parameters of NVR, with same setting method as that of NVR. Firmware Update User may remotely update NVR system. 50_ Wisenet Client Wisenet Client Auto Reboot Allow you remotely set auto maintain time for NVR. Detailed setting should be consistent with NVR local setting. Info Info User may search device name, device number, device type, MAC address, software version, IE version and hardware version of NVR. Channel Info Displays all channels camera relevant information. Local Setting User may set Record Path (save Live record and Playback clip file), Download Path for remote file, Snapshot Path for captured pictures, Interval for switching record files (Packaging time), and File type (RF, AVI and MP4). Logout Click [

] to log out and return to the login interface. English _51 WISENET CLIENT Appendix TROUBLESHOOTING Symptom Countermeasures What can I do if the system does not detect the HDD?

Check if the power supply system is properly connected and data cord and power cables are securely connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported by referring to the specifications or descriptions. I have changed the password but forget the new password, how can I access the system?

We see abnormal video signal or even no video signal by connecting the NVR and camera together. Power supply for both devices is OK. What is wrong?

How to prevent NVR from being influenced by heat?

The remote controller of NVR doesn't work while the monitor screen is OK and panel keys are functional. Why?

I want to take out HDD from my PC and install it in NVR. Can it work?

Can I playback while recording?

Can I clear some records on HDD of NVR?

If you forget system password, please consult with our technical personnel. We strongly suggest user to set password easily to be remembered and relatively safe. Check network cable on NVR side to see if the cable is firmly connected and if it is worn out and needs to be replaced, or to check if NTSC or PAL is selected consistently. The NVR needs to dissipate heat while it is running. Please place the NVR in a place with good air circulation and away from heat sources to ensure stability and life of the NVR. Operate again by aiming the remote controller at the IR receiver on front panel. If it still doesn't work, please check if the batteries in the remote controller are dying. If not, check if the remote controller is broken. All HDDs supported by the system can be used. But remember, once NVR runs, the data on your HDD will be lost. Yes. The system supports the function of playing while recording. In consideration of the file security, you may not clear part of records. If you want to remove all the records, you can format HDD. Please check if the network connection settings are correct and check if your account and password are correctly input. Why can't I log in NVR client?

Why can't I find any records during playback? Please check if the data line connection for HDD is OK and system time is properly adjusted. Try a few times and restart. If it still doesn't work, check if the HDD is broken. Please check if the motion detection sensitivity level set is too low and motion detection area setting is correct. Please check the alarm setting, check if motion detection function is enabled and object motion is detected all the time. Besides, refer to corresponding HDD alarm setting. Why doesn't dynamic detection work?

Why does buzzer keep alarming?

52_ Appendix Appendix Usage Maintenance 1. To shut down NVR, please firstly shut down the system and then turn off the power. Do not turn off the power directly or HDD data will be lost or damaged. 2. Please keep NVR away from heat sources or places. 3. Clean the internal dust regularly. Make sure the good ventilation of NVR so as to ensure the good heat dissipation. 4. Please do not hot plugging video cable, otherwise the ports will be damaged. 5. Please check the HDD cable and data cable regularly to see if they are ageing. 6. Please prevent video signals of NVR from being intervened by other electronic devices, and prevent the HDD from being damaged by static electricity and induced voltage. If the network cable is frequently plugged, it is suggested to replace connecting line regularly, or the input signal may be unstable. 7. This is A class product. it maybe bring wireless interference in life. Under this situation, it need user to make measures. English _53 APPENDIX SPECIFICATIONS SNR-73207W Item Description Video Resolution Inputs Resolution Frame rate Multi Screen display Live Performance Operating System Installation wizard Compression Recording bandwidth Frame rate Recording Event type Cloud recording channel Cloud recording profile Motion Zone Overwrite modes HDD full event Pre-event Post-event Search mode Search &

Playback Playback function Playback frame rate 54_ Appendix Details 1920x1080p (2MP) 4CH (Wireless video transmission) 1920x1080p (2MP) Max 80 fps@2MP Auto fps Max 20 fps@2MP/CH, Bitrate : Auto 1 / 4 / SEQ Linux Support H.264/265 Up to 6Mbps Dual track recording

- Main stream : H.265/264 selectable Max 20 fps@2MP/CH, Bitrate Auto

- Sub stream : H.264 fixed Max 10 fps@1280x720 2 channel Max 10 fps@640x480 Others channel MD(Sensitivity Level 1~8) Video loss HDD (Full, Failure) 2CH Auto fps auto bitrate Select Square ( 40 x 30 ) Off/On Beep, Email, Push notification to Mobile APP MAX 8sec for 2MP Up to 5min (30 sec, 1/2/5min) Date,Time/Event

- Stop, Pause, Play

- Fast forward / backward (2x, 4x, 8x)

- Slow forward (1/2x, 1/4x, 1/8x)

- Step forward / backward

- Single channel view : Max 20 fps@2MP per channel (Auto FPS)

- Multi channel view : 4CH Max 80 fps@2MP/CH (Auto FPS) Appendix Item Max. remote users Network Live stream Details 7 (Admin 1, User 6)

- Main stream : H.265/264 selectable

- Sub stream : H.264 fixed Max 20fps@2MP/CH, Bitrate : Auto Max 10 fps@1280x720 2channel Max 10 fps@640x480 Others channel Protocol support CMS Mobile viewer Web viewer Cloud recording Cloud features Push notification P2P easy connection Dropbox FW upgrade Voice command Internal HDD USB (Back-up) File Format (Back-up) VGA HDMI Simulatneous Output Ethernet USB Application Support TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, DHCP, SMTP, DNS, DDNS Support Support Support Support Support Support Support Support

- Network upgrade via Techwin webserver

- USB upgrade via download Support SATA HDD x 1 (Max 6 TB) 2 Ports for USB memory (not included) RF, AVI, MP4 VGA x 1 (1024x768, 1280x1024, 1280x720, 1440x900, 1920x1080) HDMI x 1 (1024x768, 1280x1024, 1280x720, 1440x900, 1920x1080) EDID (monitor resolution auto detection) Support (HDMI and VGA) 1 RJ45 10/100 Base-T Front: USB 2.0 x 1/ Rear: USB 2.0 x 1 (for mouse and backup/upgrade) Mouse, Remote control Color / Material Dimension (WxHxD) Weight (With hard disks) Input Voltage/Current Power consumption Operating Temperature/

Humidity English, French, Spanish, Portuguse, German Black / Metal 300 x 209 x 48 mm (11.81"x 8.22" x 1.88") 1.43 kg (3.15 lb) DC 12 V / 2 A 16 W (2T HDD) 0C~+40C (32F ~ 104F) / 20% ~ 85%RH Monitoring Etc Storage Interface Monitors Connections General OSD Lauguage Mechanical design Electrical Environmental English _55 APPENDIX DIMENSION Unit: mm (inch)

)

"

1 2 8

(

. m m 7 8 0 2

. 300 mm (11.81") 48 mm (1.88") 56_ Appendix Appendix OPEN SOURCE ANNOUNCEMENT Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program

(independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

The software included in this product contains copyrighted software that is licensed under the GPL, LGPL, Zlib/libpng License, Curl License, Open SSL Combined License. You may obtain the Corresponding Source code from us for a period of three years after our last shipment of this product. If you want to obtain the Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged. LGPL Software: ffmpeg-4.0.4 Zlib/libpng License: zlib v1.2.11 Curl License: curl v7.58.0 OpenSSL Combined License: Openssl v1.1.0j GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundations software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps:

(1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each authors protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyones free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin S 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.

(Hereinafter, translation is included without limitation in the term modification.) Each licensee is addressed as you. a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.

(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-

readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. one line to give the programs name and an idea of what it does. Copyright (C) yyyy name of author This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details. The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w and show c; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program Gnomovision (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright 2007 Free Software Foundation, Inc. <http://fsf.org/>

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it:

responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps:

(1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers and authors protection, the GPL clearly explains that there is no warranty for this free software. For both users and authors sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work. A covered work means either the unmodified Program or a work based on the Program. To propagate a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To convey a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that

(1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The source code for a work means the preferred form of the work for making modifications to it. Object code means any non-source form of a work. A Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The System Libraries of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A Major Component, in this context, means a major essential component

(kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The Corresponding Source for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the works System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the works users, your or third parties legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice;

keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:

a) The work must carry prominent notices stating that you modified it, b) The work must carry prominent notices stating that it is released and giving a relevant date. under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to keep intact all notices. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. d) If the work has interactive user interfaces, each must display A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilations users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:

a) Convey the object code in, or embodied in, a physical product

(including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product

(including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place

(gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A User Product is either (1) a consumer product, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, normally used refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term

(regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it.

(Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:

a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered further restrictions within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An entity transaction is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the partys predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributors contributor version. A contributors essential patent claims are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributors essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a patent license is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. Knowingly relying means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipients use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is discriminatory if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxys public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS The zlib/libpng License Copyright (c) 2011 Lee Thomason Copyright (c) 1995-2012 Jean-loup Gailly and Mark Adler Copyright (c) 1998-2012 Glenn Randers-Pehrson Copyright (c) 2003-2005 Hector Mauricio Rodriguez Segura Copyright (c) 1995-2009 Nullsoft and Contributors Copyright (c) 2002-2008 Davide Pizzolato This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the user of this software.;

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Curl License Copyright (c) 1996-2003, Daniel Stenberg, <daniel@haxx.se>. All right reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGTH HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. OpenSSL license Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called "OpenSSL"

nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment:

"This product includes software developed by the OpenSSL Project for user in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS"

AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

====================================================

This product includes cryptographic software written by Eric Young

(eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original authors reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a work based on the library and a work that uses the library. The former contains code derived from the library, whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this License). Each licensee is addressed as you. A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a work that uses the Library with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a work that uses the library. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a work that uses the Library uses material from a header file that is part of the Library, the object code for the work may be a derivative a) Accompany the work with the complete corresponding work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customers own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:

machinereadable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable work that uses the Library, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. designated place, offer equivalent access to copy the above specified materials from the same place. or that you have already sent this user a copy. e) Verify that the user has already received a copy of these materials For an executable, the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. d) If distribution of the work is made by offering access to copy from a 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. one line to give the librarys name and an idea of what it does. Copyright (C) year name of author This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110- 1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob

(a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice. Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.1588.5772 Fax : +82.31.8018.3740 www.wisenetlife.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Tel +1.844 WISENET (844.947.3638) www.wisenetlife.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel#1 00800.8010.8022 Tel#2 +31.(0)13.5792.790 www.wisenetlife.com