IRX108 POWERED SPEAKER W/BLUETOOTH User manual

 

Users Guide IRX 108BT IRX 112BT 2 CONTENTS Safety Instructions ....................................................................................................................... 4 13 SAFETY INSTRUCTIONS Before You Begin - Important Information Before using your IRX speaker system please review the following for important information on safety and protection of your investment in quality loudspeakers. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Service Instruction in Owners Manual: CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. 16. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle. 17. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. 18. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. 19. The mains plug of the power supply cord shall remain readily operable. 4 DECLARATION OF CONFORMITY Safety And EMC Compliance Specifications EN 55103-1:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions EN 55103-1:1997 Magnetic Field Emissions-Annex A@ 10 cm and 20 cm NEED NEW EN 55022:2003 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class A EN 55103-2:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 2: Immunity EN 61000-4-2: A2:2001 Electrostatic Discharge Immunity (Environment E2-criteria B, 4 kV Contact, 8 kV Air discharge) EN 61000-4-3:2003 Radiated, Radio-frequency, Electromagnetic Immunity (Environment E2, criteria A) EN61000-4-4:2005 Electrical Fast Transient/Burst Immunity (criteria B) EN 61000-4-5:2001 Surge Immunity (criteria B) EN 61000-4-6:1996 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (criteria A) EN 61000-4-11:2004 Voltage Dips, Short Interruptions and Voltage Variation UL 6500 2nd Edition 1999 Audio/Video and Musical Instruments Apparatus for Household, Commercial, and Similar General Use IEC 60065_2001 / EN 60065_2002 + A1:2006 + A11:2008 UL Compliance Specifications UL 60065 7th Ed. CAN/CSA 22.2 No.60065_2003 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body IC Warning

- English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

- French:

Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

Cet appareil est conforme FCC et IC lexposition aux rayonnements limites fixes pour un environnement non contrl. Cet appareil doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet transmetteur ne doit pas tre co-situ ou oprant en liaison avec toute autre antenne ou transmetteur. 5 QUICK SETUP GUIDE Congratulations on your purchase of JBL Professional IRX100 Series loudspeakers! We know you are anxious to get up and running as fast as possible, which is why you are reading this section. The following will help you get set up as soon as possible. 6 Packaging Contents Your IRX100 system should include the following:

1 x IRX100 speaker 1 x 10'(3m) IEC Power Cable 1 x Quick Start Guide Unbox it WILL PROVIDE NEW IMAGES 1 2 3 Open the top of the box. Lay box on its side. Turn box upside down, then lift box up to reveal speaker. Configuration Options NEED ART 1 2 3 4 Floor Standing Monitor Position Pole Mounted Subwoofer Mounted EQ Preset Selection Button B Bass Boost C CH1 & CH2 Gain D POWER IT ON EQ Preset NEED NEW CALLOUTS LED Indicators A QUICK SETUP GUIDE F Automatic Feedback Supression G Music Ducking H Power Standby I Bluetooth J Master Volume K XLR Male Loop Thru XLR-1/4 Combo Inputs E 1. Connect the supplied power cord to the power receptacle on the rear of the speaker. 2. Connect the power cord to an available power outlet. 3. Flip on the Power Standby Switch ( H ) and the Power LED on the front of the speaker will illuminate. PLUG IN THE INPUTS 1. Turn Channel Gain Controls ( D ) and Master Volume Control ( J ) all the way to the left before connecting any inputs 2. Connect XLR or TRS cable from audio source to CH1 or CH2 inputs ( D ) 3. The mic/line operates as a detent on the gain switch. Once youve cleared a certain point (12 oclock), it detents and switches to Mic. SET OUTPUT LEVEL 1. Using the EQ Preset ( B ) button, select the appropriate preset to match your application ( Full-

Range Only ). 2. Set the gain level for the input using the Channel Gain ( D ) controls. 7 3. Slowly turn Master Volume ( J ) to the right until the desired volume is reached. 8 NEED NEW CALLOUTS BACK PANEL J. Master Volume Controls the master volume of the unit. By turning the knob counter-

clockwise you will be lowering the overall volume of the speaker. By turning the control clockwise you will be increasing the overall volume of the speaker. K. XLR Male Loop Thru This XLR (male) output connector provides a method of sending audio out to an external source. If signal is present on both inputs, the inputs will be summed and sent out as a 50/50 mix A. EQ Preset Selection Button Use this button to toggle through the four different settings. B. EQ Preset LED Indicators MUSIC:

This is the default setting for the IRX loudspeakers. Use this setting when your IRX loudspeaker is being used either on a tripod or pole and facing towards your audience. VOCAL:

Use this setting when your IRX loudspeaker is being used in conjunction with a separate subwoofer. This preset enables a High Pass Filter (HPF) set at 100Hz. SPEECH:

Use this setting when your IRX loudspeaker is being used for Speech only or Spoken Word only applications and is facing towards the audience. NORMAL:

Use this setting when your IRX loudspeaker is being used as a stage monitor facing towards you. C. Bass Boost Increase the Bass volume. D. CH1 & CH2 Gain Controls the gain of CH1 & CH2 respectively. By turning the signal counter-

clockwise you will be lowering the gain of your source material. By turning the control clockwise you will be increasing the gain. E. XLR-1/4 Combo Inputs These balanced inputs accepts a standard XLR (female) connector and also a 1/4 TRS phone plug. A broad range of signals from microphones, audio mixing consoles and electronic musical instruments may be connected here. The sensitivity of these inputs are controlled by the MIC/

LINE SWITCHES. F. Automatic Feedback Supression Need description G. Music Ducking Need description H. Power Standby This LED (White) lights to indicate that the speaker is plugged in and switched ON. I. Bluetooth Indicator This LED will illuminate blue to indicate that your Bluetooth connection is established. 9 OVERVIEW - IRX SERIES FAMILY IRX 108BT 10" Two-way multipurpose self-powered sound reinforcement IRX 112BT 12" Two-way multipurpose self-powered sound reinforcement NEED SPECS 1000 Watt 1000 Watt 26 lbs. / 11.79 kg 110 H / 60 V Coverage 33 lbs. / 14.96 kg 100 H / 60 V Coverage Thank you for purchasing the new JBL IRX Series!

More than just another great JBL sound system, the new IRX Series is a true step forward in technology developed specifically to deliver the best sound possible regardless of its application. Completely rethinking how truly good an affordable self-

contained, portable PA system can be, JBL engineers purposely designed and built the IRX Series from the ground up featuring JBLs advanced waveguide technology, JBL designed and manufactured transducers. This total redesign of the IRX Series platform leverages the latest technologies in cabinet materials, acoustic science, transducer design and user friendliness that delivers the extraordinary quality of a high-end studio monitor in a fully professional, highly flexible, easy to use, portable system for todays working musicians and sound providers. With proper care your IRX Series speakers should provide you with many years of flawless performance, and are flexible enough to be a part of your sound reinforcement system even as it grows in scope. 10 IRX108/112BT - BLOCK DIAGRAM 1 1 12 IRX108BT SPECIFICATIONS System Specification System Type:

Maximum SPL Output:

Frequency Range (-10 dB):

Frequency Response (3 dB):

EQ:

Self powered 15, two-way, bass-reflex 127 dB 39 Hz - 20 kHz 50 Hz - 20 kHz 3 Parametric EQs, High and Low Shelf (Available via Bluetooth app only) Amplification Amplifier Design:

High Efficiency Class D NEED SPECS System Power Rating:

Input Impedance:

Line Input Gain:

Mic Input Gain:

Connectors:

LED Indicators:

Cooling:

AC Power Input:

AC Power Consumption (120VAC): 1/8th Power 1.14A (Max), 1/4th Power 1.71A (Max), 1/3rd Power 2.03A (Max) 1000W Peak (700 LF + 300HF); 500W Continuous (350W LF + 150W HF) 20K ohms (Balanced) Infinity to +26.8dB (+14dBu max input level) Infinity to +29dB (in addition to line input gain) 2 x Balanced XLR-1/4 combination inputs; 1 x male XLR loop thru out Power, Bluetooth, EQ Preset, EQ +, Signal CH1, Signal CH2, Limit Passively Cooled (No Fan) 100-120VAC 50/60Hz; 230-240VAC 50/60Hz Speaker Specification LF Driver:

HF Driver:

Coverage Pattern:

Crossover Frequency:

1 x JBL 615H 380mm (15) woofer with 2 voice coil 1 x JBL 2414H-1 25.4mm (1) annular polymer diaphragm, neodymium compression driver 90 H x 60 V 1.8kHz Enclosure Material:

Suspension / Mounting:

Handles:

Finish:

Grille:

Dimensions (H x W x D):

Gross Weight:

Polypropylene, multi-purpose main & monitor 36mm pole socket with stabilizing screw, 3 x M10 suspension points One left, one right, one top, one bottom (4 total) Black Granite Powder coated perforated steel with acoustically transparent screen backing 707mm x 439mm x 365mm (27.8 x 17.3 x 14.4) 17.69 kg (39 lbs) 253.32 9 4

. 5 8 4 312.89 Bottom View Front View Left View Rear View IRX112BT SPECIFICATIONS System Specification System Type:

Maximum SPL Output:

Frequency Range (-10 dB):

Frequency Response (3 dB):

Self powered 12, two-way, bass-reflex 126 dB 48 Hz - 20 kHz 57 Hz - 20 kHz NEED SPECS EQ:

3 Parametric EQs, High and Low Shelf (Available via Bluetooth app only) Amplification Amplifier Design:

System Power Rating:

Input Impedance:

Line Input Gain:

Mic Input Gain:

Connectors:

LED Indicators:

Cooling:

AC Power Input:

AC Power Consumption (120VAC): 1/8th Power 1.14A (Max), 1/4th Power 1.71A (Max), 1/3rd Power 2.03A (Max) High Efficiency Class D 1000W Peak (700 LF + 300HF); 500W Continuous (350W LF + 150W HF) 20K ohms (Balanced) Infinity to +26.8dB (+14dBu max input level) Infinity to +29dB (in addition to line input gain) 2 x Balanced XLR-1/4 combination inputs; 1 x male XLR loop thru out Power, Bluetooth, EQ Preset, EQ +, Signal CH1, Signal CH2, Limit Passively Cooled (No Fan) 100-120VAC 50/60Hz; 230-240VAC 50/60Hz Speaker Specification LF Driver:

HF Driver:

Coverage Pattern:

Crossover Frequency:

1 x JBL 612H 380mm (12 in) woofer 1 x JBL 2414H-1 25.4mm (1 in) polymer diaphragm, neodymium compression driver 100 H x 60 V nominal 1.8 kHz Enclosure Material:

Suspension / Mounting:

Handles:

Finish:

Grille:

Dimensions (H x W x D):

Gross Weight:

Polypropylene, multi-purpose main & monitor 36mm pole socket with stabilizing screw, 3 x M10 suspension points One left, one right, one top, one bottom (4 total) Black Granite Powder coated perforated steel with acoustically transparent screen backing 664 mm x 380 mm x 316 mm (26.14 x 14.96 x 12.44) 14.96 kg (33 lbs) 253.32 NEED IRX112BT DIMS 9 4

. 5 8 4 312.89 Bottom View Front View Left View Rear View 1 3 PURPOSEFUL PRODUCT DESIGN Portability made easy Enclosure designs have been optimized for ideal acoustic resonance taking advantage of injection molding techniques and mechanical shaping of the enclosures. This results in tremendous increases in cabinet volumes which enable better acoustic performance while maintaining the same footprint. Four intelligently positioned handles make the 600 easy to carry and move around. Integrated hardware mounts, designed into the enclosures, allow each model to be flown when required. And indexed feet molded into the enclosures allow for convenient storage and transport, secure stacking for stage monitor and traditional stand up configurations, and unique acoustic configurations. Pole Mount & Locking Feet Suspension Points Top Handle & Indexed Molding Side Handle Secure Stacking Monitor Position NEED PHOTOS 14 COVERAGE ducking operation and the Automatic feedback suppression info EON600 Family Coverage Patterns Compared to a Typical Speaker TYPICAL EON615 TYPICAL EON612 TYPICAL EON610 The EON600s extraordinary performance results from a breakthrough approach to waveguide design. JBL engineers examined the radiation characteristics of the EONs high and low frequency drivers at 36 different points employing JBLs exclusive, state of the art measurement techniques, then designed individual waveguides for both components that control the sound radiation at the high frequencies, the crossover point and at the low frequencies. Special fluting is designed into the structure that guides the frequencies through the full range of the system. The result is consistent response throughout its 90 degree coverage pattern. The quality and consistency between on axis and off axis response delivers uniform coverage and high intelligibility throughout the coverage area, which means the EON600s smooth, transparent sound is the same for the entire audience. Coverage through Revolutionary Waveguides Image Control Waveguide Increased High Frequency detail. The Image Control Waveguides patent-pending design precisely controls the sound emanating from the EON600 in the vertical and horizontal planes ensuring the representation of your mix is neutral and accurate at the listening position. Low Frequency Waveguide JBLs ground breaking new low frequency waveguide features special fluting that is designed into the structure that guides the frequencies through the full range of the system. 1 5 16 T F E L BLUETOOTH INTEGRATION Visit jblpro.com/IRX100 to register Supports iOS & Android Bluetooth audio NOT supported Speaker Discovery R I G H T Features Bluetooth speaker discovery (up to 4 at one time) Bass and Treble control (Low and High Shelf EQ) PEQ + (3 parametric EQ filters with control over Frequency, Gain and Q) Master Volume control Recall back panel Factory Presets (Main, Monitor, Sub and Speech) Save and Recall User EQ Presets Bluetooth Instructions U N E M S T E S E R P Bass & Treble Controls U N E M S T E S E R P PEQ+ Controls E S O L C Preset Management LOUDSPEAKER PLACEMENT AND SUSPENSION Floor Monitor Floor Standing Tripod Stand Stacking Pole Mount The following guidelines will help you achieve optimum sound wherever you use your EON loudspeakers:

Raise the speakers as high as possible. For best results try to get the high frequency horn at least 2 to 4 feet above the heads of the audience. If the speakers are too low, the people in the back of the audience will not receive the best quality sound. Place the speakers between the microphones and the audience. Feedback occurs when the microphones pick up sound from the speakers and feed the sound back through the sound system. If space is limited, point the speakers away from the microphones to reduce feedback. Locate the speakers away from turntables. Low-frequency feedback occurs when the output of the speaker is picked up by the tone arm of the turntable and is re-

amplified. A heavy, solid turntable base and shock mounting can also reduce this type of feedback in DJ applications. Use more speakers in large or highly reverberant spaces. Spreading speakers throughout these spaces will produce much better sound than trying to compensate with loudness level or equalization. For very long distances, the use of another set of speakers with time delay is recommended. Stand speakers upright for PA - Tilt the speakers back on the side for stage monitoring. Upright stance provides even coverage over a wide area. EON speakers are also designed with two slanted positions for stage monitoring applications. 15 CABLES & CONNECTORS XLR/F to XLR/M Microphone Cable TRS (balanced) 1/4 inch phone jack to XLR/M The standard cable for interconnection of microphone and line level signal in professional audio systems. Microphone to mixer For connecting balanced devices with 1/4 inch phone and maybe used interchangeably. TRS (unbalanced) 1/4 inch phone jack to XLR/M For connections of instruments with unbalanced outputs to balanced XLR inputs. TS (unbalanced) 1/4 inch phone jack to XLR/M This cable is electrically identical to "TRS" (unbalanced) 1/4 inch phone and may be used interchangeably. XLR/M to RCA (phono) cable Connects consumer audio products and some DJ mixer outputs to professional audio equipment inputs TRS 1/4 inch Phone jack to dual 1/4 inch Phone jack Splits a stereo output into separate left/right signals. TRS 1/4 inch Phone jack to dual 1/4 inch Phone jack Change to a TRS mini-phone jack to connect to the output of a portable. MP3/CD player and computer sound cards to a mixer. XLR/F to XLR/M audio ground lift Only with balanced in - and outputs XLT/F to XLR/M Audio Groud Lift

(no connection) 17 18 APPLICATION EXAMPLES SMALL PA USING BOTH INPUTS AND THRU FUNCTION CH1 input set to Mic CH2 input set to Line EQ Preset: Main APPLICATION EXAMPLES SMALL PA USING TWO SYSTEMS AS MONITORS CH1 input set to Mic CH2 input set to Line EQ Preset: Monitor 19 TROUBLE SHOOTING Symptom Likely Cause What to do Speaker not connected to active AC power Power not switched on Speaker in bypass mode Verify that speaker is connected and that the circuit is on Switch on power and verify that power LED is on Twist any knob or press the bypass button to wake the speaker. Speaker power cable is faulty or improperly connected. Re-seat the power cable at both ends. Substitute a known-good power cable Signal source

(mixer, instrument, etc.) is not sending. Check VU meters on the source mixer Verify that the tape or CD is playing. Use headphones to verify that the instrument is actually sending an audio signal Faulty cables and connections Disconnect and re-seat signal cables. Replace suspected cable with a known-good cable Microphone requires phantom power The IRX does not supply phantom power. Switch to a dynamic microphone, use a battery powered microphone (if possible), use an external phantom power supply for condenser type microphones. Excessive input signal, trying to exceed the capabilities of the speakers Reduce the output level of the source. Turn down the level controls on the speaker. Use additional IRX speakers. Mixer or other source is overdriven Review the Owners Manual for your mixer and adjust controls as needed. Input sensitivity (gain) Channel faders Master faders Once this is done, review the instructions in the Quick Start section of this guide. Make sure that the MIC/LINE switch is in the LINE (disengaged) position. Mic/Line switch operation will be a little different. Reduce the level settings at speaker. Review the Owners Manual for Improper gain structure your mixer and adjust controls as needed. No sound No sound, speaker is connected to working AC power but wont come on. No sound. Speaker comes on. No sound with microphone connected directly to the MIC/ LINE input. Signal sounds distorted and very loud, PEAK light is lit most of the time. Signal sounds distorted even at moderate volumes, LIMIT light is not lit. Lots of hiss in the sound, the mixer controls are at very low settings. Noise or hiss heard at output. Noisy source device Hum or Buzz that increases or decreases when the mixer level controls are moved. Improper A/C ground or faulty equipment connected to mixer input Faulty cable between source equipment and mixer Input sensitivity (gain) Channel faders Master faders Disconnect the devices that are connected to your speaker one at a time. If the noise goes away, the problem is with the source or the connecting cable. Disconnect or mute channels one at a time to isolate the problem. Refer to the owners manual of the faulty equipment for troubleshooting help. Substitute a known-good cable for the suspected faulty cable. Hum or Buzz Improper A/C grounding, ground loops Lift the audio ground by using an XLR/F to XLR/M adapter on one end. Re-route audio cables away from AC power and lighting cables. Excessively long unbalanced cable run Use the balanced outputs (if available) of your mixer or source equipment to drive your EON speakers. Use a DI (direct injection) box to convert your unbalanced equipment output to a balanced output. Improper system gain structure Reduce the INPUT level controls and increase the output level of your source devices. 20 WARRANTY INFORMATION The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from thedate of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase. Who Is Protected By This Warranty?

Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warranty service is required. What Does The JBL Warranty Cover?

Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered:

Damage caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual; damage resulting from the performance of repairs by someone not authorized by JBL; claims based upon any misrepresentations by the seller; any JBL product on which the serial number has been defaced, modified or removed. Who Pays For What?

JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be sure to save the original shipping cartons because a charge will be made if replacement cartons are requested. Payment of shipping charges is discussed in the next section of this warranty. How To Obtain Warranty Performance If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818/893-8411). We may direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair. Either way, youll need to present the original bill of sale to establish the date of purchase. Please do not ship your JBL product to the factory without prior authorization. If transportation of your JBL product presents any unusual difficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible for transporting your product for repair or arranging for its transportation and for payment of any initial shipping charges. However, we will pay the return shipping charges if repairs are covered by the warranty. Limitation of Implied Warranties ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. EXCLUSION OF CERTAIN DAMAGES JBLS LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE. JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA 21 CONTACT INFORMATION Mailing Address:

JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address:

JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329

(Do not return product to this address without first obtaining prior authorization from JBL) Customer Service:

Monday through Friday 8:00am -5:00pm Pacific Coast Time in the U.S.A.

(800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web:

www.jblpro.com Professional Contacts, Outside the USA:

Contact the JBL Professional Distributor in your area. A complete list of JBL Professional international distributors is provided at our U.S.A. website: www.jblpro.com 22 23 Part Number: xxxxxxx 08/19 8500 Balboa Boulevard Northridge, CA 91329 USA www.jblpro.com