APEX0100101 Access Point Installation Guide Users Manual

 

AP-270 Series Outdoor Access Point Installation Guide The Aruba AP-274 and AP-275 are environmentally hardened, outdoor rated, dual-radio IEEE 802.11ac wireless access points. These access points use MIMO (Multiple-in, Multiple-out) technology and other high-throughput mode techniques to deliver high-performance, 802.11ac 2.4 GHz and 5 GHz functionality while simultaneously supporting existing 802.11a/b/g/n wireless services. The AP-270 Series access point works only in conjunction with an Aruba Controller. AP-270 Series Operations Wireless transceiver Wireless access point (IEEE 802.11 a/b/g/n/ac) Wireless air monitor (IEEE 802.11 a/b/g/n/ac) Protocol-independent networking functionality Compatibility with IEEE 802.3at PoE Central management configuration and upgrades with an Aruba Controller. Guide Overview AP-270 Series Hardware Overview on page2 provides a detailed hardware overview of the AP-274 and AP-275. Before You Begin on page7 provides key questions to ask and items to consider when deploying an outdoor wireless network. Installing the AP on page8 describes the multi-step process for a successful installation and deployment of the AP-274 and AP-275. Safety and Regulatory Compliance on page14 provides an overview of safety and regulatory compliance information. Package Contents AP-274 or AP-275 Access Point Cable Glands x2 Copper Lug x1 M4x6 Screw x1 USB Console Cable Installation Guide (this document) The weatherproof caps for Ethernet, Console, and power interfaces are connected to the AP, not loose in the package. Mounting kits for use with the AP-270 Series access points are sold separately. Contact your Aruba sales representative for details. 0511511-05 | May 2014 1 Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials. Use these materials to repack and return the unit to the supplier if needed. AP-270 Series Hardware Overview Figure 1 AP-274 Front View (Aesthetic Cover Removed) System LED The antenna connectors of AP-274 are covered by an aesthetic cover in the package. The aesthetic cover can be removed when necessary. Figure 2 AP-275 Front View System LED LED The AP-270 Series is equipped with one LED that indicates the system status of the AP. 2 AP-270 Series Outdoor Access Point |

Installation Guide Table 1 AP-270 Series LED Meanings during Boot Up LED Color/State Meaning System LED Off Red No power to AP Initial power-up Green - Flashing AP booting Green - Steady AP ready and 1000Mbps Ethernet link established. The LED turns off after 1200 seconds Green - Yellow, 6 seconds period AP ready and 10/100Mbps Ethernet link established. The LED turns off after 1200 seconds Table 2 AP-270 Series LED Meanings during Operation LED Color/State System LED Solid Red One blink off every 3 seconds Two quick blink off 0.5 seconds apart cycled every 3 seconds Meaning General fault Radio 0 fault (5 GHz) Radio 1 fault (2.4GHz) Figure 3 AP-274 Rear View Grounding Point USB Console Port and Reset button AC Power Interface LAN Port WAN Port AP-270 Series Outdoor Access Point |

Installation Guide 3 Figure 4 AP-275 Rear View Grounding Point USB Console Port and Reset button AC Power Interface LAN Port WAN Port USB Console Port The USB Micro-B console port allows you to connect the AP to a terminal or a laptop for direct local management. Use the included USB console cable to connect the AP. You can download the necessary driver for USB-UART adapter from support.arubanetworks.com under the Tools & Resources tab. Use the following setting to access the terminal:

Table 3 Console Settings Baud Rate Data Bits Parity Stop Bits Flow Control 9600 8 None 1 None Ethernet Ports AP-270 Series is equipped with two10/100/1000Base-T (RJ-45) Gigabit Ethernet ports (WAN and LAN port) for wired network connectivity. The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE midspan injector. These ports have RJ-45 female connectors with the pin-outs shown in Figure 5. 4 AP-270 Series Outdoor Access Point |

Installation Guide Figure 5 Gigabit Ethernet Port Pin-Out 1000Base-T Gigabit Ethernet Port RJ-45 Female Pin-Out 1 2 3 4 5 6 7 8 Signal Name BI_DA+

BI_DA-

BI_DB+

BI_DC+

BI_DC-

BI_DB-

BI_DD+

BI_DD-

Function Bi-directional pair +A, POE Negative Bi-directional pair -A, POE Negative Bi-directional pair +B, POE Positive Bi-directional pair +C, POE Positive Bi-directional pair -C, POE Positive Bi-directional pair -B, POE Positive Bi-directional pair +D, POE Negative Bi-directional pair -D, POE Negative Reset Button The reset button can be used to return the AP to factory default settings. To reset the AP:

1. Power off the AP. 2. Press and hold the reset button using a small, narrow object, such as a paperclip. 3. Power-on the AP without releasing the reset button. The system LED will flash within 5 seconds. 4. Release the reset button. The system LED will flash again within 15 seconds indicating that the reset is completed. The AP will now continue to boot with the factory default settings. AC Power Interface The AP-270 Series is capable of AC power in the range of 100 - 240 VAC. The power cord or power connector kit is sold separately. Grounding Point Always remember to protect the AP by installing grounding lines. The ground connection must be complete before connecting power to the AP enclosure. Figure 6 AP-274 and AP-275 Top View Mounting Holder Solar Shield At the top of the AP-270 Series, the solar shield with the mounting holder is fixed onto the AP before shipping from the factory. AP-270 Series Outdoor Access Point |

Installation Guide 5 Figure 7 AP-274 bottom View With Aesthetic Cover Aesthetic Cover Removed Figure 8 AP-275 bottom View Air Vent External Antenna Connectors The AP-274 is equipped with six external antenna connectors. The connectors are labeled 2G0, 2G1, 2G2, 5G0, 5G1 and 5G2, and correspond to 2.4/5Ghz radio chains 0,1, and 2. Air Vent The bottom of the AP-270 Series has an air vent to balance the pressure and humidity inside and outside the AP. It also allows air exchange between the AP and the environment in a controlled way that doesnt allow water to get into the AP. 6 AP-270 Series Outdoor Access Point |

Installation Guide Before You Begin

!

CAUTION FCC Statement: Improper termination of access points installed in the United States configured to non-US model controllers will be in violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80). EU Statement:

Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the ArubaOS User Guide for details on restrictions.

!

CAUTION Produit rseau local radio basse puissance operant dans la bande frquence 2.4 GHz et 5 GHz. Merci de vous referrer au ArubaOS User Guide pour les details des restrictions. Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlglich Einschrnkungen finden Sie im ArubaOS User Guide. Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla ArubaOS User Guide per avere informazioni detagliate sulle restrizioni. Pre-Installation Network Requirements After WLAN planning is complete and the appropriate products and their placement have been determined, the Aruba controller(s) must be installed and initial setup performed before the Aruba APs are deployed. For initial setup of the controller, refer to the ArubaOS Quick Start Guide for the software version installed on your controller. Pre-Installation Checklist Before installing your AP-275, be sure that you have the items listed below:

Gigabit Ethernet cable of required length IEEE 802.3at compliant PoE source or AC power source Aruba Mobility Controller configured and installed on the network Layer 2/3 network connectivity to your AP One of the following network services:

Aruba Discovery Protocol (ADP) DNS server with an A record DHCP Server with vendor specific options Aruba Networks, Inc. in compliance with governmental requirements, has designed the AP-270 Series such that only authorized network administrators can change configuration settings. For more information about AP configuration, refer to the ArubaOS Quick Start Guide and ArubaOS User Guide.

!

CAUTION Access points are radio transmission devices and as such are subject to governmental regulation. Network administrators responsible for the configuration and operation of access points must comply with local broadcast regulations. Specifically, access points must use channel assignments appropriate to the location in which the access point will be used. AP-270 Series Outdoor Access Point |

Installation Guide 7 Verifying Pre-Installation Connectivity Before you install APs in a network environment, make sure that the APs will be able to locate and connect to the controller when they are powered on. Specifically, you must verify the following conditions:

When connected to the network, each AP is assigned a valid IP address. APs can locate the controller. Refer to the ArubaOS Quick Start Guide for instructions on locating and connecting to the controller. Identifying Specific Installation Locations You can mount the AP-270 Series access point on a wall or pole. Use the AP placement map generated by Arubas RF Plan software application to determine the proper installation location(s). Each location should be as close as possible to the center of the intended coverage area and should be free from obstructions or obvious sources of interference. These RF absorbers/reflectors/interference sources will impact RF propagation and should have been accounted for during the planning phase and adjusted for in RF plan. Identifying Known RF Absorbers/Reflectors/Interference Sources Identifying known RF absorbers, reflectors, and interference sources while in the field during the installation phase is critical. Make sure that these sources are taken into consideration when you attach an AP to its fixed location. Examples of sources that degrade RF performance include:

Cement and brick Objects that contain water Metal Microwave ovens Wireless phones and headsets Installing the AP Service to all Aruba products should be performed by trained service personnel only. 8 AP-270 Series Outdoor Access Point |

Installation Guide Using the Mounting Kits The AP-270 Series can be installed on a wall or attached to a pole by using mounting kits:

Table 4 Applicable Mounting Kits for AP-270 Series Part Number Description AP-270-MNT-V1 Long mounting kit for wall and vertical pole mounting, 300 mm from vertical mounting asset. AP-270-MNT-V2 Short mounting kit for wall and vertical pole mounting, 75 mm from vertical mounting asset. AP-270-MNT-H1 Mounting kit for hanging from inclined or horizontal structure. The AP-270 Series access point does not ship with any mounting kits. These mounting kits are available as accessories.and must be ordered separately. For installation instructions on AP-270-MNT-V1, AP-270-MNT-V2 and AP-270-MNT-H1, please refer to the AP-

270-MNT-V1 Installation Guide, AP-270-MNT-V2 Installation Guide and AP-270-MNT-H1 Installation Guide respectively. Grounding the AP The grounding must be completed before powering up the AP. The grounding wire should be #8 AWG. 1. Peel the cover of one end of the grounding wire and place the bare grounding wire into the included copper lug, and press firmly with the crimping pliers. 2. Fasten the copper lug to the grounding hole on the AP with the included M4 x6 screw as shown in Figure 9. Figure 9 Grounding the AP Connecting the Ethernet Cable To connect the Ethernet cable to the AP, perform the following steps using the cable glands that ships with your AP. Failure to use the included Ethernet cable glands can lead to connectivity and POE issues. WARNING AP-270 Series Outdoor Access Point |

Installation Guide 9 The cable is not included and must be purchased separately. Purchase a suitable UV-resistant, outdoor rated, CAT 5E or better RJ45 cable for use with the AP. Figure 10 Installing a Cable Gland Sealing Nut Clamping Ring CAT 5E or Better Cable 1. Slide the sealing nut over the cable (without the RJ45 connector attached to the end). 2. Slide the clamping ring over the cable. 3. Using a crimping tool, attach the shielded RJ45 connector to the end of the cable. 4. Remove the weatherproof cap on the Ethernet port. 5. Insert the RJ45 connector to the Ethernet port. 6. Screw the clamping ring onto the Ethernet port. 7. Screw the sealing nut onto the clamping ring. Connecting the Power Cable

!

CAUTION Installation and service of Aruba products should be performed by Professional Installers in a manner that is consistent with the electrical code in force in the jurisdiction of deployment. In many countries this will require a licensed electrician to perform this operation. In Japan, this is a Certified Electrician by Ministry of Economy, Trade, and Industry. The AP-270 Series does not ship with any power cables. These are available as accessories and should be ordered separately. The AP-270 Series product offering offers two ways to connect the unit to AC power. Two power cord variants are offered and a connector kit that allows the customer to assemble their own cable if the standard offering does not meet deployment needs. The applicable SKUs for these options are:

Table 5 SKUs for Powering Options Part Number Description PC-OD-AC-P-NA Weatherproof AC power cable(5m), North America version PC-OD-AC-P-INT Weatherproof AC power cable(5m), International (EU) version CKIT-OD-AC-P Weatherproof connector kit for AC power interface The difference between the NA and INTL part variants is the color coding of the conductors. The North American cable uses Black (Hot), White (Neutral), and Green (Ground). 10 AP-270 Series Outdoor Access Point |

Installation Guide The INTL part follows the international schema of Brown (Hot), Blue (Neutral) and Yellow/Green

(Ground) Best Practice for Outdoor Connection to AC Mains In all circumstances and with any outdoor infrastructure the recommended practice is to connect to AC mains in an order grade weather protected junction box. This needs to be implemented by a qualified resource in a manner that is consistent with the electrical code in force in the jurisdiction of deployment. In many countries this will require a licensed electrician to perform this operation. In Japan, this would is a Certified Electrician by Ministry of Economy, Trade and Industry. The use of plugs with infrastructure equipment is suitable only for temporary installs where nuisance tripping of GFI plugs is considered tolerable. Should it be desired to attach a plug to the cable assemblies then the installer is expected to follow all directions provided with the plug end in a fashion consistent with local electrical code. Use of the CKIT-OD-AC-P Assembly instructions for this part are shipped with the part. All instructions must be followed to ensure proper assembly of the connector onto the cable. The required specifications for third party cable used with the CKIT solution are as follows:

AC power cable specifications (when using AC connector kit and custom cable): minimum voltage/

current rating 250V/1A, diameter 6-12mm, rated for outdoor use and UV exposure AC Power Cable Connector PIN OUT Figure 11 AC power cable connector Neutral Hot Ground Connecting the Power Cable to the AP-275 1. Remove the weatherproof cap on the power interface. 2. Insert the power cable connector into the power interface and hand-fasten the locknut. Verifying Post-Installation Connectivity The integrated LEDs on the AP can be used to verify that the AP is receiving power and initializing successfully (see Figure 4 and Table 2). Refer to the ArubaOS Quick Start Guide for further details on verifying post-installation network connectivity. Configuring the AP AP Provisioning/Reprovisioning Provisioning parameters are unique to each AP. These local AP parameters are initially configured on the controller which are then pushed out to the AP and stored on the AP itself. Aruba recommends that AP-270 Series Outdoor Access Point |

Installation Guide 11 provisioning settings be configured via the ArubaOS Web UI only. Refer to the ArubaOS User Guide for complete details. AP Configuration Configuration parameters are network or controller specific and are configured and stored on the controller. Network configuration settings are pushed out to the AP(s) but remain stored on the controller. Configuration settings can be configured via the ArubaOS Web UI or ArubaOS CLI. Refer to the ArubaOS User Guide for complete details. 12 AP-270 Series Outdoor Access Point |

Installation Guide Product Specifications Mechanical:

Device Dimensions (HxWxD) AP-274 (without aesthetic cover): 5.5 inches x 9 inches x 9.4 inches (14cm x 23cm x 24cm) AP-274 (with aesthetic cover): 7.5 inches x 9 inches x 9.4 inches (19cm x 23cm x 24cm) AP-275: 10.6 inches x 9 inches x 9.4 inches (27cm x 23cm x 24cm) Weight AP-274(without aesthetic cover): 5.3 lbs/2.4 kg AP-274 (with aesthetic cover): 6lbs/2.7kg AP-275: 5.3 lbs/2.4 kg Electrical Ethernet 2 x 10/100/1000Base-T auto-sensing Ethernet RJ-45 Interfaces MDI/MDX Power over Ethernet (IEEE 802.3at compliant), 48VDC/0.6A Power 100-240 VAC 50/60 Hz from external AC power source POE support on WAN port: 802.3at-compliant POE sourcing devices Environmental Operating Temperature: -40C to 60C (-40F to 140F) Humidity: 5% to 95% non-condensing Storage Temperature: -50C to 85C (-58F to 185F) For additional specifications on this product, please refer to the data sheet. The data sheet can be found at www.arubanetworks.com. AP-270 Series Outdoor Access Point |

Installation Guide 13 Safety and Regulatory Compliance Aruba Networks provides a multi-language document that contains country-specific restrictions and additional safety and regulatory information for all Aruba access points. This document can be viewed or downloaded from the following location: www.arubanetworks.com/safety_addendum Regulatory Model Name The following regulatory model names apply to the AP-270 Series:

AP-274: APEX0101 AP-275: APEX0100 FCC This device is electronically labeled. To view the FCC ID:

1. Log into the controller WebUI 2. Navigate to Maintenance > Controller > About.

!

CAUTION

!

CAUTION

!

CAUTION Aruba access points must be installed by a professional installer. The professional installer is responsible for ensuring that grounding is available and it meets applicable local and national electrical codes. RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits. This equipment should be installed and operated with a minimum distance of 13.78 inches (35 cm) between the radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. When operated in the 5.15 to 5.25 GHz frequency range, this device is restricted to indoor use to reduce the potential for harmful interference with co-channel Mobile Satellite Systems. FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instructions, may cause interference harmful to radio communications. If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. 14 AP-270 Series Outdoor Access Point |

Installation Guide EU Regulatory Conformance Aruba Networks, Inc., hereby declares that the APEX0101 and APEX0100 device models are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC -CE(!). The Declaration of Conformity made under Directive 1999/5/EC is available for viewing at www.arubanetworks.com. Proper Disposal of Aruba Equipment For the most current information about Global Environmental Compliance and Aruba products, see our website at www.arubanetworks.com. Waste of Electrical and Electronic Equipment Aruba products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin). The treatment applied at end of life of these products in these countries shall comply with the applicable national laws of countries implementing Directive 2002/96EC on Waste of Electrical and Electronic Equipment

(WEEE). European Union RoHS Aruba products also comply with the EU Restriction of Hazardous Substances Directive 2011/65/EC (RoHS). EU RoHS restricts the use of specific hazardous materials in the manufacture of electrical and electronic equipment. Specifically, restricted materials under the RoHS Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging will be marked with the RoHS label shown at the left indicating conformance to this Directive. China RoHS Aruba products also comply with China environmental declaration requirements and are labeled with the EFUP 10 label shown at the left. 10 AP-270 Series Outdoor Access Point |

Installation Guide 15

Hazardous Materials Declaration

(Parts)

(PCA Boards)

(Mechanical Sub-Assemblies)

(Hazardous Substance)

SJ/T11363-2006 Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.

Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard.

This table shows where these substances may be found in the supply chain of electronic information products, as of the date of sale of the enclosed product.

The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are per the symbol shown here. The Environment- Friendly Use Period is valid only when the product is operated under the conditions defined in the product manual. Canadian Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canadian Caution This radio transmitter (identify the device by certification number, or model number ifCategory II) has been approved by Industry Canada to operate with the antenna typeslisted below with the maximum permissible gain and required antenna impedance foreach antenna type indicated. Antenna types not included in this list, having a gaingreater than the maximum gain indicated for that type, are strictly prohibited for usewith this device. Gain of antenna: 14.0dBi max/10dBi max;

Type of antenna: directional/ommi;

Impedance of antenna: 50ohm Le prsent metteur radio (identifier le dispositif par son numro de certification ouson numro de modle s'il fait partie du matriel de catgorie I) a t approuv parIndustrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous etayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne.Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Gain d'antenne: 14.0dBi maximal/10dBi maximal;

Type d'antenne: 50 ohm, directionnel/ommi. 16 AP-270 Series Outdoor Access Point |

Installation Guide Philippines (AP-274) Type-Approval No. ESD-1408699C Philippines (AP-275) Type-Approval No. ESD-1408698C Hong Kong (AP-274) HK0011400885 Hong Kong (AP-275) HK0011400884 UAE (AP-274) TRA REGISTERED No:

ER01290403/14 DEALER No:

DA0039425/10 UAE (AP-275) TRA REGISTERED No:

ER0129040/14 DEALER No:

DA0039425/10 AP-270 Series Outdoor Access Point |

Installation Guide 17 Singapore (AP-274 and AP-275) DB101525 18 AP-270 Series Outdoor Access Point |

Installation Guide This page is intentionally left blank. AP-270 Series Outdoor Access Point |

Installation Guide 19 Contacting Aruba Networks Web Site Support Main Site Support Site http://www.arubanetworks.com https://support.arubanetworks.com Software Licensing Site https://licensing.arubanetworks.com/login.php Wireless Security Incident Response Team (WSIRT) Support Emails http://www.arubanetworks.com/support/wsirt.php Americas and APAC support@arubanetworks.com EMEA emea.support@arubanetworks.com WSIRT Email Please email details of any security problem found in an Aruba product. wsirt@arubanetworks.com Telephone Support Aruba Corporate FAX Support

+1 (408) 227-4500

+1 (408) 227-4550 United States 800-WI-FI-LAN (800-943-4526) Universal Free Phone Service Number

(UIFN): Australia, Canada, China, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea, Singapore, South Africa, Taiwan, and the UK.

+800-4WIFI-LAN (+800-49434-526) All Other Countries

+1 (408) 754-1200 2014 Aruba Networks, Inc. All rights reserved. 20 AP-270 Series Outdoor Access Point |

Installation Guide www.arubanetworks.com 1344 Crossman Avenue Sunnyvale, California 94089 Phone: 408.227.4500 Fax 408.227.4550