Cisco Edge 340 User Manual

 

Cisco Edge 340 Series Installation Guide OL-29523-01 About this Guide, page 1

Cisco Edge 340 Series Accessories, page 2

Overview of the Cisco Edge 340 Series, page 2

Installing the Cisco Edge 340 Series, page 7

Powering On the Cisco Edge 340 Series, page 10

Resetting to Factory Mode, page 10

Technical Specifications, page 10

Regulatory Standards Compliance, page 11

EMC Class B Notices, Warnings, and Safety Information, page 12

Declaration of Conformity for RF Exposure, page 16

Obtaining Documentation and Submitting a Service Request, page 18 About this Guide This guide describes how to install the Cisco Edge 340 Series device and describes the LEDs and ports. For configuration information, see the Cisco Edge 340 Series documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and documentation updates, see the release notes on Cisco.com. Cisco Systems, Inc. www.cisco.com Cisco Edge 340 Series Accessories Cisco Edge 340 Series Accessories The following list shows the accessories that you can purchase for the Cisco Edge 340 Series device:

Power adapter

Power cord

Power cord retainer

WiFi external antenna

Console cable with RJ45 and DB9F

RS-232 cable for Digital Media Player (DMP) and Cisco LCD connectivity

Infrared Receiver (IR) remote control IR extender Note All the accessories, except the Cisco Edge 340 Series chassis, should be purchased individually, and are not included by default with the Cisco Edge 340 Series. Note Verify that you have received the items you have purchased. If any item is missing or damaged, contact your Cisco representative or reseller. Overview of the Cisco Edge 340 Series The Cisco Edge 340 Series is available in two variants: wireless SKU and non-wireless SKU. The wireless SKU supports both Wi-Fi and Bluetooth, while the non-wireless SKU supports neither. Table 1 Cisco Edge 340 Series Models Model No. CS-E340W CS-E340 Description Cisco Edge 340 Series (wireless) Cisco Edge 340 Series (non-wireless) Cisco Edge 340 Series Installation Guide 2 OL-29523-01 Overview of the Cisco Edge 340 Series Figure 1 Cisco Edge 340 SeriesFront panel Wireless SKU Cisco Edge 340 Series f 1 2 3 4 5 6 7 8 Non-wireless SKU Cisco Edge 340 Series f 2 4 1 0 9 3 3 4 1 0 9 3 SD card slot 1 2 USB ports 3 4 Factory mode pinhole Power button Bluetooth status Storage status 5 6 7 Wifi status 8 Gigabit Ethernet (uplink) status Figure 2 Cisco Edge 340 SeriesRear Panel HDMI HDMI Audio f IR Extension USB Console RS232 Out In VGA GE 12V=3A 1 2 3 4 5 6 7 8 9 10 11 IR extension 1 2 USB ports 3 4 5 Audio out port 6 Audio in port Console port RS-232 port 7 HDMI port 8 VGA port 9 Gigabit Ethernet port 10 Power switch 11 Power cord retainer hole OL-29523-01 Cisco Edge 340 Series Installation Guide 3 Overview of the Cisco Edge 340 Series Port Descriptions USB Console RS-232 Audio Out Audio In HDMI There are four USB 2.0 Type A ports. Two of them are on the front panel, and two on the rear panel. When the Cisco Edge 340 is powered by external power adapter, all four USB ports are enabled. The port marked with red outline on the rear panel can provide up to 5W power to a connected device. Each of the other three USB ports can provide up to 2.5W power. When the Cisco Edge 340 is powered by PoE or PoE+ switch, only the two USB ports on the front panel are enabled, and each can provide up to 2.5W power. The two USB ports on the rear panel are disabled. You can connect a wired USB keyboard and mouse, a wireless USB receiver for a keyboard and mouse, a USB camera, or a USB thumb drive. The Cisco Edge 340 Series provides one console port. You can order a Cisco console cable to connect the unit and enter the Clish environment. One male DB9 connector (DCE mode) is supported so that the Cisco Edge 340 Series can support access and configuration of monitors (DTE mode) via RS232. You can connect headphones or external speakers that use a 3.5-mm connector. You can connect a microphone that uses a 3.5-mm connector. The HDMI port can support 720p and 1080p HD video output with the maximum resolution of 1920x1200. Note This product incorporates HDMI technology HDMI, the HDMI Logo, and High-Definition Multimedia Interface are or registered trademarks registered trademarks of HDMI Licensing LLC in the United States and other countries. Cisco Edge 340 Series Installation Guide 4 OL-29523-01 Overview of the Cisco Edge 340 Series VGA Gigabit Ethernet The VGA port can support 720p and 1080p HD video output with the maximum resolution of 1920x1200. The Gigabit Ethernet uplink port provides a 10/100/1000 Mb/s connection to other devices. Wireless Features WiFi Bluetooth Supports 802.11a/b/g/n dual-band wireless AP or client. Supports Bluetooth 4.0 and Human Interaction Design Protocol (HIDP) for remote control or input devices. Power Management Wake on LAN The Cisco Edge 340 Series supports Wake on LAN when it is in the sleep mode or the soft off mode. The system can be woken up via an Ethernet message, and changed to the full on mode. PoE PD (IEEE 802.3at) The Power Over Ethernet (PoE) solution for a Powered Device (PD) describes a standardized system that transfers electrical power along with data, on the Ethernet cable. The Cisco Edge 340 Series supports PoE PD so that the device can be powered on from the Power-Sourcing Equipment (PSE) via the Ethernet cable when the external power supply is not connected. Given the power consumption of the Cisco Edge 340 Series, the IEEE 802.3at (the power available at PD is 25.50W) PSE will be supported. The Cisco Edge 340 Series can be powered by an IEEE 802.3af (the power available at PD is 12.95W) PSE. But if you use the USB ports, the total current might be over the maximum power current of the IEEE 802.3af PSE, and the overcurrent event will be triggered. The PSE will shut down the power of the Cisco Edge 340 Series and then perform another round of detection. OL-29523-01 Cisco Edge 340 Series Installation Guide 5 Overview of the Cisco Edge 340 Series LEDs Figure 3 shows the LEDs on the front panel of the Cisco Edge 340 Series. Figure 3 Cisco Edge 340 Series LEDs on the Front Panel Cisco Edge 340 Series f 1 4 1 0 9 3 1 2 3 4 1 2 Bluetooth1 Storage status 1. Only for the CS-E340W Series 3 WiFi1 4 Gigabit Ethernet uplink Table 2 shows the color and meaning of each LED. Table 2 LEDs LED Power

(behind power button) Color Off Blinking blue Blinking red Blinking green Solid blue Solid red Solid green Meaning There is no power. System is in Power-on self test (POST) stage. System POST fails. System is in the factory mode. System is operating normally. System is in the soft off mode. System is in the sleep mode. Cisco Edge 340 Series Installation Guide 6 OL-29523-01 Table 2 LEDs (continued) Installing the Cisco Edge 340 Series LED Gigabit Ethernet WiFi (AP and client) Bluetooth Storage Meaning No link. Link up. Activity. WiFi is disabled. WiFi is enabled and functioning. Color Off Blue Blinking blue Off Solid blue Blinking blue WiFi is transmitting data. Off Solid blue Blinking blue Off Blinking blue Bluetooth is disabled. Bluetooth is enabled and functioning. Bluetooth is transmitting data. Storage is not active. Storage is active. Installing the Cisco Edge 340 Series You can install the Cisco Edge 340 Series on a wall or a pillar, a metal pole, or a ceiling T-joint by using the wall-mount kit. You can also install the Cisco Edge 340 Series on almost any Video Electronics Standards Association (VESA)-compliant flat-panel display that is attached to a third-party VESA bracket. Besides, you can mount the Cisco Edge 340 Series on a desk or table vertically by using the desktop-mount bracket. Equipment That You Need

Phillips screwdriver

Scratch awl or other sharp-pointed object (wall-mount)

Electric drill with a 6-mm drill bit (wall-mount)

Crescent wrench or socket wrench

Pencil

Bubble level or laser level Before You Begin Before installing the Cisco Edge 340 Series, verify that these guidelines are met:

Front clearance so that the LEDs can be seen.

AC power cord reaches from the AC power outlet to the rear-panel connector.

Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting. Make sure that the cabling is safely away from other devices that might damage the cables.

Airflow around the Cisco Edge 340 Series is unrestricted.

Temperature around the unit does not exceed 45C. OL-29523-01 Cisco Edge 340 Series Installation Guide 7 Installing the Cisco Edge 340 Series

Humidity around the Cisco Edge 340 does not exceed 85 percent.

Altitude at the installation site is below 2000m. Warning Statements Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Warning In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332 Warning This product relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

20A Statement 1005 Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019 Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Warning For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection:

10/100/1000 Ethernet Statement 1044 Cisco Edge 340 Series Installation Guide 8 OL-29523-01 Installing the Cisco Edge 340 Series Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of:

113F (45C) Statement 1047 Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least:

3 inches (7.6 cm) Statement 1076 Caution Be aware of the size and weight of the Cisco Edge 340 Series when mounting. Ensure that the mounting location has a stable flat surface and can safely support the weight of the Cisco Edge 340 Series. Installing the Cisco Edge 340 Series on a Wall, Pole, or Ceiling Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378 You can use the wall-mount kit to mount the Cisco Edge 340 Series to:

A wall or pillar (concrete, plaster, or drywall)

A suspended grid ceiling T-joint

A metal pole For more information and detailed installation procedures, see Mounting the Kit Assembly (Wall, Pole, and Ceiling Mount) for Cisco Edge 340 Series. Install the Cisco Edge 340 Series on a Flat-Panel Display You can use your display-mounting kit to install a Cisco Edge 340 to almost any VESA-compliant flat-panel display that is attached to a third-party VESA bracket. You can mount your Cisco Edge 340 Series above or below the flat-panel display, whether the display is oriented in landscape mode

(horizontal) or portrait mode (vertical). Note See the manufacturer documentation pertaining to your display to learn if its casing is VESA compliant and, if it is, where you can obtain a compatible VESA bracket for it. Cisco does not sell VESA brackets or kits. The LCD-mount plates for this product might not be long enough to mount your mounting kit to an extremely large flat-panel display even if that display is VESA compliant. For more information and detailed installation procedures, see Mounting the Kit Assembly (Display Mount) for Cisco Edge 340 Series. OL-29523-01 Cisco Edge 340 Series Installation Guide 9 Powering On the Cisco Edge 340 Series Installing the Cisco Edge 340 Series on a Desk or Table You can use your desktop-mounting kit to install a Cisco Edge 340 on a desk or table vertically by using the desktop-mount bracket. For more information and detailed installation procedures, see Mounting the Kit Assembly (Desktop Mount) for Cisco Edge 340 Series. Powering On the Cisco Edge 340 Series Connect the power cord to an electrical outlet. Press the Power button to power on the Cisco Edge 340 Series. See Table 2 for a description of the LED colors and their meanings. Resetting to Factory Mode To reboot the Cisco Edge 340 to factory mode and force an image upgrade, press and hold the Factory mode pinhole for more than 5 seconds when you press the Power button to power on. Technical Specifications Table 3 Cisco Edge 340 Series Environmental and Physical Specifications Environmental Ranges Operating temperature Storage temperature Relative humidity Operating altitude Storage altitude Physical Specifications Weight (without bracket) Dimensions (H x W x D) 0 to 45C 0 to 50C Without power supply and powered by PoE With power supply 13 to 158F (25 to 70C) Operating and storage: 10 to 90% (noncondensing) Without power supply and powered by PoE With power supply Up to 4573 m 0 to 3000 m 0 to 2000 m 0.912 kg (2.01 bl) 244 mm x 186 mm x 35 mm (9.6 in. x 7.3 in. x 1.4 in.) (without mount) Cisco Edge 340 Series Installation Guide 10 OL-29523-01 Regulatory Standards Compliance This section includes all the regulatory, safety, and EMC standards. Table 4 Regulatory Standards Compliance for the Cisco Edge 340 Series Regulatory Standards Compliance Specification Safety EMC Bluetooth WIFI Wireless Radio Description UL 60950-1 Second Edition CAN/CSA-C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1:2005 (Second Edition), Am 1:2009 AS/NZS 60950-1 GB4943.1- 2011 CCC (China compulsory certification) FCC Part 15 (CFR 47) ICES-003 AS/NZS CISPR22 EN55022:2010 CISPR22:2008 EN61000-3-2:2006/A2:2009 EN61000-3-3:2008 VCCI KN22 CNS13438 KN24 EN55024:2010 CISPR24:2010 BQB 802.11a/b/g/n Mark SRRC FCC Part 15.247 (CFR 47) FCC Part 15.407 RSS-210 EN 300328 V1.7.1 EN 301-489-1 EN 301-489-17 EN 301-893 DGT LP0002 NOM-121 AS/NZS 4268 IDA HKTA 1039 ARIB STD - T66 ARIB STD - T71 Anatel EN 50385 Canada RSS-102 Issue 4 OET 65C/2.1091/ all applicable KDBs including multiple transmitter requirements OL-29523-01 Cisco Edge 340 Series Installation Guide 11 EMC Class B Notices, Warnings, and Safety Information EMC Class B Notices, Warnings, and Safety Information This section includes the EMC Class B warnings for the Cisco Edge 340 Series. Statement 2018Class B Notice for FCC Modifying the equipment without Ciscos authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio or TV technician for help. Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco antennas, could void the users authority to operate this device. Caution The band from 5600 to 5650 MHz will be disabled by the software during the manufacturing and cannot be changed by the end user. Caution Within the 5.15 to 5.25 GHz band, this device is restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Statement 2022Class B Notice for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Cisco Edge 340 Series Installation Guide 12 OL-29523-01 Canadian Compliance for the Cisco Edge 340 Series EMC Class B Notices, Warnings, and Safety Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. This radio transmitter MODEL has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio MODEL a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Statement 295Class B Warning for Korea Warning This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas. OL-29523-01 Cisco Edge 340 Series Installation Guide 13 EMC Class B Notices, Warnings, and Safety Information Korea Application Statement This equipment generates radio frequency that may cause harmful interference. This equipment must not be co-located in the environment of human safety exposure. Statement 157VCCI Compliance for Class B Equipment Warning This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. VCCI-B Cisco Edge 340 Series Installation Guide 14 OL-29523-01 Compliance Statement for Taiwan EMC Class B Notices, Warnings, and Safety Information Compliance Statement for Device Working at 2.4 G and 5G in Brazil This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from stations of the same kind, and may not cause harmful interference to systems operating on a primary basis Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. OL-29523-01 Cisco Edge 340 Series Installation Guide 15 Declaration of Conformity for RF Exposure Declaration of Conformity for RF Exposure This section contains information on compliance with guidelines related to RF exposure. This Device Meets International Guidelines for Exposure to Radio Waves The Cisco Edge 340 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization

(ICNIRP) and include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines that are designed to reduce the overall exposure of the user or operator. Separation Distance MPE 0.107 mW/cm2 Distance 20.00 cm (7.87 inches) 1.00 mW/cm2 Limit The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of wireless devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing the antennas at a greater separation distance then recommended. This Device Meets FCC Guidelines for Exposure to Radio Waves The Cisco Edge 340 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in FCC Part 1.1310. The guidelines are based on IEEE ANSI C 95.1 (92) and include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines that are designed to reduce the overall exposure of the user or operator. The device has been tested and found compliant with the applicable regulations as part of the radio certification process. Separation Distance MPE 0.107 mW/cm2 Distance 20.00 cm (7.87 inches) 1.00 mW/cm2 Limit Cisco Edge 340 Series Installation Guide 16 OL-29523-01 Declaration of Conformity for RF Exposure The US Food and Drug Administration has stated that present scientific information does not indicate the need for any special precautions for the use of wireless devices. The FCC recommends that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing the antennas at a greater separation distance than recommended or lowering the transmitter power output. This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves The Cisco Edge 340 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in Health Canada Safety Code 6. The guidelines include a substantial safety margin designed into the limit to ensure the safety of all persons, regardless of age and health. The systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines that are designed to reduce the overall exposure of the user or operator. Separation Distance MPE 0.107 mW/cm2 Distance 20.00 cm (7.87 inches) 1.00 mW/cm2 Limit Health Canada states that present scientific information does not indicate the need for any special precautions for the use of wireless devices. They recommend that if you are interested in further reducing your exposure you can easily do so by reorienting antennas away from the user, placing the antennas at a greater separation distance than recommended, or lowering the transmitter power output. For More Information These documents provide complete information about the Cisco Edge 340 and are available at:

www.cisco.com/go/cisco_edge_340

Cisco Edge 340 Series Software Configuration Guide

Release Notes for the Cisco Edge 340 Series Note Before installing, configuring, or upgrading the Cisco Edge 340 Series, refer to the Release Notes for the latest information. OL-29523-01 Cisco Edge 340 Series Installation Guide 17 Obtaining Documentation and Submitting a Service Request Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see Whats New in Cisco Product Documentation at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html. Subscribe to Whats New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. 2013 Cisco Systems, Inc. All rights reserved. Cisco Edge 340 Series Installation Guide 18 OL-29523-01