J20H070 Bluetooth Module User Manual

 

COMPANY CONFIDENTIAL HON HAI PRECISION IND. CO., LTD. 5F-1, 5 Hsin -An Rd. Ambit Microsystems(Shanghai) LTD. TEL: 86-21-6120-6688 Fax: 86-21-5774-9230

+886-3-577-5100 User Manual Bluetooth Module Part Name Doc. Rev. Foxconn P/N. Bluetooth Module 0.0 J20H070 Prepared by Fei-shan Feng Reviewed by Opo. Li Approved by COMPANY CONFIDENTIAL Content 1. Introduction ..........................................................................................................................3 1.1 Major Components ................................................................................................ 3 1.2 Features ................................................................................................................... 3 1.3 Application Scope ................................................................................................. 3 2. Hardware Overview.............................................................................................................4 2.1 Block Diagram ........................................................................................................ 4 2.2 Interface and Connector ...................................................................................... 5 3. Product Specification ...........................................................................................................6 3.1 RF Specification ..................................................................................................... 6 3.2 Electrical Specification ........................................................................................ 7 3.2.1 Recommended operating rating .............................................................. 7 3.2.2 DC Characteristics ....................................................................................... 7 3.2.3 ESD Information ........................................................................................... 7 3.3 Mechanical Specification .................................................................................. 13 COMPANY CONFIDENTIAL 1. Introduction Project Name: Bluetooth module Project Number: J20H070 This document provides information for designing and using the Broadcom Bluetooth module with BCM20705 solution. It is a confidential document of Foxconn. The J20H070 Bluetooth module provides Bluetooth 3.0 compliant wireless modem function. This module is based on BCM20705 solution which is integrated 2.4GHz transceiver and manufactured using the industrys most advanced 65nm CMOS low-power process. 1.1 Major Components

Broadcom BCM20705

Serial Flash Memory 1.2 Features Bluetooth 3.0 Compliant UART Interface. Module is powered by the host with a 3.3V +/- 10% supply. One PCB printed antennas. 4 layers through hole PCB design with halogen free FR4 material 1.3 Application Scope The BT Module is compliant to Bluetooth 3.0 standard:

Frequency range: 2400MHz~ 2483.5MHz Carrier Spacing: 1.0MHz Duplexing: TDD Modulation: FHSS , GFSK, pi/4-DQPSK, 8DPSK Symbol Rate: 1Mbps (GFSK), 2Mbps (pi/4-DQPSK), 8DPSK This module is designed with BTB connector and UART Interface, and it is installed as a client device in TV platform. COMPANY CONFIDENTIAL 2. Hardware Overview 2.1 Block Diagram The general HW architecture is shown below Figure:

. Module Block Diagram COMPANY CONFIDENTIAL 2.2 Interface and Connector Pin definition:

Pin Number Symbol Name Status 1 2 3 4 5 6 7 8 9 10 11 12 13 14 S1 S2 GND BT_RST HUSBDP UARTTXD HUSBDM UARTRXD GND BT_DEVICE_WAKE GND BT_HOST_WAKE GND EMT_SYNC BT_CTS_IC VDD_3P3 GND GND P I I/O O I/O I P I P I P I O P P P Pin definition Ground Reset pin USB positive data UART Transmit signal USB negative data UART Receive signal Ground

-

Ground

-

Ground

-

-

+3.3V power input Ground Ground COMPANY CONFIDENTIAL 3. Product Specification Contents Typ. Max. 3.1 RF Specification Bluetooth 3.0 Items

- TX Characteristics -

1. Power Levels BT Output Power (Basic Data Rate) 2. Initial Carrier Frequency Tolerance Average Offset 3. Carrier Drift Drift Rate DH1 DH3 DH5 Average Drift DH1 DH3 DH5 4. Modulation Characteristic F1avg F2max F1/F2 Ratio 5. EDR Relative Transmit Power 2Mbps: P[DQPSK]-P[GFSK]

3Mbps: P[8DPSK]-P[GFSK]

6. EDR Carrier Frequency Stability and Modulation Accuracy 2Mbps: /4 DQPSK Initial Frequency Error: i Frequency Error: 0 Block Frequency Error: i + 0 RMS DEVM Peak DEVM Min.

-6

-75

-20

-20

-20

-25

-40

-40 140 115 0.8

-4

-4

-75

-10

-75

-

-

1.5 6

-4

-4

-5

-1 0 0 150 140 0.96 0.25 0.25

-3

-2

-5 0.05 0.12 99% DEVM (% Symbols <=0.3) 3Mbps: 8DPSK Initial Frequency Error: i Frequency Error: 0 Block Frequency Error: i + 0 RMS DEVM 99%

100%

-75

-10

-75

-

-9

-1.5

-10 0.05 Unit dBm kHz kHz/50us kHz/50us kHz/50us kHz kHz kHz kHz kHz dB dB kHz kHz kHz kHz kHz kHz 5 75 20 20 20 25 40 40 175 1 1 75 10 75 0.2 0.35 75 10 75 0.13 COMPANY CONFIDENTIAL

-

99%

0.13 100%

0.25 BT3.0 Contents 2.4GHz~2.4835GHz 1Mbps, 2Mbps, 3Mbps Min. Typ.

-

-

-

-20

-20

-20

-90

-90

-85 0

-14

-14 Max.

-83

-83

-77 Unit dBm dBm dBm dBm dBm dBm Peak DEVM 99% DEVM (% Symbols <=0.13) Items Specification Frequency range Data rate

- RX Characteristics -

1. Minimum Input Level Sensitivity GFSK (1Mbps)

/4 DQPSK (2Mbps) 8DPSK (3Mbps) 2. Maximum Input Level GFSK (1Mbps)

/4 DQPSK (2Mbps) 8DPSK (3Mbps) 3.2 Electrical Specification 3.2.1 Recommended operating rating Element DC supply voltage Symbol UV+

Min 3.0 Typ 3.3 Max 3.6 Unit

(V) 3.2.2 DC Characteristics Symbol STBY3.3V Parameter Supply voltage Tx Current Rx Current Standby Current 3.2.3 ESD Information Min 3.0

--

--

Typ 3.3 40 26 5 Max 3.6 50 32 7 Unit

(V)

(mA)

(mA)

(mA) Mode HBM MM Level

+/-1500

+/-200 Unit V V COMPANY CONFIDENTIAL Industry Canada statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:

(For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:

COMPANY CONFIDENTIAL In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:

Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 2878D-

J20H070. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D- J20H070". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. COMPANY CONFIDENTIAL Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. COMPANY CONFIDENTIAL As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: MCLJ20H070. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. CE statement:

Declare under our own responsibility that the product J20H066 to which this declaration refers conforms with the relevant standards according to the regulation in Article 3.1.a, 3.1.b and 3.2 of the R&TTE Directive 1999/5/EEC of the European Community Applied Standards:

- ETSI EN 300 328 V1.7.1

- ETSI EN 301 489-1

- ETSI EN 301 489-17 COMPANY CONFIDENTIAL

- ETSI EN 62479

- IEC/EN 60950-1 National Authorities were informed according to Article 6.4 of Frequency Notification. Special Requirements are considered. The product is labeled with CE Marking. Any unauthorized modification of the product voids this declaration. This product can be used in the following countries For Taiwan () Note: 1. 2.

:

XXXyyyLPDzzzz-x (NCC ID) COMPANY CONFIDENTIAL 3.3 Mechanical Specification Dimension (W x L ): 30mmx17mm PCB: 4 layer HF-FR4 design