| submitted | available | document details (if available) | source link |
|---|---|---|---|
| October 25 2013 | November 30 2013 | Microsoft Word - J20H081.00 user manual-20131015a eden Acrobat Distiller 8.1.0 (Windows) |
| various | User Manual | Users Manual | 317.01 KiB | October 25 2013 / November 30 2013 |
Ambit Microsystems (Shanghai) LTD. No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China Tel :86-21-61206688 Ext:22165 FAX:86-21-57749230 User Manual of J20H081 Project Name Approval Sheet Rev. Foxconn Part No. WiFi+BT module 1.2 J20H081.00 Prepared by Clon Liu Reviewed by Eddie Huang Approved by
CONTENTS 5 3.1 4.1 4.2 4.3 5.1 5.2 5.3 5.4 5.5 REVISION HISTORY 1 2 MANUFACTURING INFORMATION 3 PRODUCT OVERVIEW APPLICATION SCOPE 4 MODULE HARDWARE OVERVIEW BLOCK DIAGRAM FEATURES INTERFACE AND CONNECTOR ELECTRICAL SPECIFICATION ABSOLUTE MAXIMUM RATING RECOMMENDED OPERATING RATING DC CHARACTERISTICS ESD INFORMATION ENVIRONMENT STORAGE CONDITION RF SPECIFICATION IEEE802.11B IEEE802.11G 802.11N HT20 802.11A 802.11AN HT20 802.11AN HT40 802.11AC HT80 BLUETOOTH 3.0 ANTENNA ELECTRICAL SPECIFICATION 7 MECHANICAL SPECIFICATIONS SHIELDING COVER DIMENSION PCB ASSEMBLY DIMENSION 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.1 7.2 6
1 Revision History
Date Document revision Change Description 2013/08/31 2013/10/14 2013/10/15
1.0 1.1 1.2 Initial release Add BT specification and modify Wifi specification Modify BT standard from V3.0+HS standard to V3.0 standard Add specification of Aux antenna
2 Manufacturing Information Manufacture Country:
Made in China Manufacturer:
Ambit Microsystems (Shanghai) LTD. Manufacture Address:
No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China
3 Product Overview The J20H081.00 802.11a/b/g/n/ac and BT3.0 module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7650U solution .It fully complies with IEEE 802.11n,IEEE 802.11 a/b/g and ,IEEE 802.11 ac standards,Bluetooth v2.1+EDR, v3.0 standard, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. 3.1 Application scope The wireless LAN is compliant to IEEE 802.11n,IEEE 802.11 a/b/g and IEEE 802.11 ac standards . The data rate of 802.11b is up to 11Mbps and fallback rates of 5.5, 2, 1Mbps. The data rate of 802.11a/g is up to 54Mbps and fallback rates of 48,36,24,18,12,9, 6Mbps. The data rate of 802.11n HT20 is up to 65Mbps and fallback rates of 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps;
The data rate of 802.11n HT40 is up to 130Mbps and fallback rates of 117, 104, 78, 52, 39, 26, 13Mbps;
The data rate of 802.11ac VHT80 is up to 433.3Mbps and fallback rates of 390,325,292.5,260,195,130,97.5,65,32.5Mbps;
The BT Module is compliant to Bluetooth 3.0 and EDR standard:
Carrier Frequency: 2402MHz ~ 2480 MHz Carrier Spacing: 1.0MHz Duplexing: TDD Modulation: FHSS GFSK, pi/4-DQPSK, 8DPSK Symbol Rate: 1Mbps (GFSK), 2Mbps (pi/4-DQPSK), 3Mbps (8DPSK)
4 Module Hardware Overview 4.1 Block Diagram The general HW architecture is shown below Figure:
. Module Block Diagram 4.2 Features IEEE802.11a/b/g/n/ac (1X1) based on MTK MT7650U solution. i i Support BT3.0 i USB 2.0 Interface, High and Full Speeds supported. i Module is powered by the host with a 5.0V +/- 5% supply. i External PCB printed antennas. i 4 layers through hole PCB design with FR4 material 4.3 Interface and Connector i Pin definition:
i Vendor: JST i Vendor P/N: SM05B-GHS-TB
Pin Number Symbol Name Status 1 2 3 4 5 S1 S2 GND DP DM UV+
GND GND GND I/O I/O P Pin definition Ground USB positive data USB negative data USB +5V power input Ground Ground Ground
5 Electrical Specification Absolute maximum rating Element DC supply voltage Symbol UV+
Min Recommended operating rating Element DC supply voltage Symbol UV+
Min 4.5 DC Characteristics Parameter Symbol UV+
Supply voltage 2.4GHz Tx Current(1M/15dBm) 2.4GHz Tx Current(11M/15dBm) 2.4GHz Tx Current(6M/15dBm) 2.4GHz Tx Current(54M/15dBm) 2.4GHz Tx Current(MCS0/15Bm/HT20) 2.4GHz Tx Current(MCS7/15dBm/HT20) Rx Current 5GHz Tx Current(6M/12dBm) 5GHz Tx Current(54M/12dBm) 5GHz Tx Current(MCS0/12Bm/HT20) 5GHz Tx Current(MCS7/12dBm/HT20) 5GHz Tx Current(MCS0/12Bm/HT40) 5GHz Tx Current(MCS7/12dBm/HT40) 5GHz Tx Current(MCS0/11Bm/VHT80) 5GHz Tx Current(MCS9/11dBm/VHT80) Min 4.5 Typ 5.0 Typ 5.0 Typ. 5.0 200
220 220 220 80
300
Max 6.5 Max 5.5 Max 5.5 Unit
(V) Unit
(V) Unit
(V)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA) ESD Information Mode HBM Level 1000 Unit V Environment Storage Condition 5.1
5.2
5.3
5.4
5.5
Environment condition Temperature
Humidity Operating Temperature: -10 deg.C ~70 deg.C Storage Temperature: -40 deg.C ~85 deg.C Operating Humidity: 20% ~90%
Storage Humidity: 20% ~90%
6.1 Items IEEE802.11b Contents IEEE802.11b DSSS / CCK CH1 to CH11
6 RF Specification Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@1Mbps 2) Target Power@2Mbps 3) Target Power@5.5Mbps 4) Target Power@11Mbps 2. Spectrum Mask @15dBm 1) fc-33MHz f fc-22MHz 2) fc-22MHz f fc-11MHz 3) fc+11MHz f fc+22MHz 4) fc+22MHz f fc+33MHz 3. Frequency Error 4 Modulation Accuracy(EVM)@15dBm 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps RX Characteristics 5 Minimum Input Level Sensitivity 1) 1Mbps (FER8%) 2) 2Mbps (FER8%) 3) 5.5Mbps (FER8%) 4) 11Mbps (FER8%) 6 Maximum Input Level (FER8%)
1, 2, 5.5, 11Mbps Typ. Max. 15 15 15 15
Typ.
-92
-91
-90
-89
-5 16.5 16.5 16.5 16.5
-50
-30
-30
-50
+10
-10
-10
-10
-10 Max.
-91
-89
-87
-85
Unit dBm dBm dBm dBm dBr dBr dBr dBr ppm dB dB dB dB Unit dBm dBm dBm dBm dBm Min. 13.5 13.5 13.5 13.5
-10
Min.
-10
Contents IEEE802.11g OFDM CH1 to CH11 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-10 Min.
-20 Typ. 15 15 15 15 15 15 15 15
-28
Typ.
-92
-91
-90
-87
-85
-80
-77
-75
-11 Max. 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+10 Max.
-83
-81
-79
-77
-75
-73
-71
-69
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm
6.2 IEEE802.11g Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%)
6.3 802.11n HT20 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Contents IEEE802.11n HT20 OFDM CH2 to CH10 MCS0/1/2/3/4/5/6/7 Max. Typ. 15 15 15 15 15 15 15 15
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-10 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+10 Max.
-81
-79
-77
-75
-73
-71
-69
-67
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-10 Min.
-20
Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Contents IEEE802.11n HT20 OFDM CH1, CH11 MCS0/1/2/3/4/5/6/7 Typ. Max. 14 14 14 14 14 14 14 14
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-10 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+10 Max.
-81
-79
-77
-75
-73
-71
-69
-67
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
-10 Min.
-20
Contents IEEE802.11a OFDM CH36 to CH165 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
-10 Min.
-20 Typ. 12 12 12 12 12 12 12 12
-28
Typ.
-92
-91
-90
-87
-85
-80
-77
-75
-11 Max. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+10 Max.
-83
-81
-79
-77
-75
-73
-71
-69
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm
6.4 802.11a Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%)
Contents IEEE802.11an HT20 OFDM CH36 to CH165 MCS0/1/2/3/4/5/6/7 Typ. Max. 12 12 12 12 12 12 12 12
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-10 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+10 Max.
-81
-79
-77
-75
-73
-71
-69
-67
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
-10 Min.
-20
6.5 802.11an HT20 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%)
802.11an HT40 6.6
Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Contents IEEE802.11an HT20 OFDM CH38 to CH159 MCS0/1/2/3/4/5/6/7 Max. Typ. 12 12 12 12 12 12 12 12
Typ.
-88
-86
-84
-81
-77
-72
-71
-69
-10 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+10 Max.
-78
-76
-74
-72
-70
-68
-66
-64
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
-10 Min.
-20
Contents IEEE802.11ac HT80 OFDM CH42 to CH155 MCS0/1/2/3/4/5/6/7/8/9 Typ. Max. 11 11 11 11 11 11 11 11
Typ.
-80
-78
-76
-74
-72
-70
-68
-66
-63
-59
-10 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+10 Max.
-75
-73
-71
-69
-67
-65
-63
-61
-58
-54
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-10 Min.
-20
6.7 802.11ac HT80 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS7 (PER < 10%) 10) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%)
6.8 Bluetooth 3.0 Items
- TX Characteristics -
1. Power Levels BT Output Power (Basic Data Rate) 2. Initial Carrier Frequency Tolerance Average Offset 3. Carrier Drift Drift Rate DH1 DH3 DH5 Average Drift DH1 DH3 DH5 4. Modulation Characteristic F1avg F2max F1/F2 Ratio 5. EDR Carrier Frequency Stability and Modulation Accuracy 2Mbps:/4 DQPSK Initial Frequency Error: Frequency Error: Block Frequency Error: RMS DEVM Peak DEVM 99% DEVM (% Symbols <=0.3) 3Mbps:8DPSK Initial Frequency Error: Frequency Error: Block Frequency Error: RMS DEVM Peak DEVM 99% DEVM (% Symbols <=0.13)
- RX Characteristics -
1. Minimum Input Level Sensitivity GFSK (1Mbps)
/4 DQPSK (2Mbps) 8DPSK (3Mbps)
Min.
-3
-75
-20
-20
-20
-25
-40
-40 140 115 0.8
-75
-10
-75
99%
-75
-10
-75
99%
Unit dBm kHz kHz/50us kHz/50us kHz/50us kHz kHz kHz kHz kHz kHz kHz kHz kHz kHz kHz Contents Max. Typ. 0 0 0 0 0 0 0 0 150 140 0.96 0 0 0 0.05 0.12 100%
0 0 0 0.05 0.13 100%
2 75 20 20 20 25 40 40 175 75 10 75 0.2 0.35 75 10 75 0.13 0.25 Min.
Typ.
-88
-88
-84 Max.
-79
-79
-76 Unit
dBm dBm dBm
Antenna Electrical Specification 6.9
Parameter Operating frequency range Antenna gain (max) Antenna gain (max) Value 2.4 ~ 2.4835 5.15~5.85
-0.4 1.12 0.28 0.9 Units GHz dBi (Main Antenna) dBi (Aux Antenna)
7 Mechanical Specifications Shielding Cover Dimension 7.1 Dimension (LxWxH): 25.19mm x 18.56mm x 2.0mm Thickness: 0.2mm
PCB Assembly Dimension 7.2 Dimension (W x Lx H ): 63.8mmx20mmx1.0mm PCB: 4 layer HF-FR4 design Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:
(For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC:
2878D-J20H081. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D- J20H081". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer la limite de p.i.r.e.;
(iii) le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: MCLJ20H081. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. For Taiwan ()
Note: 1. 2.
: XXXyyyLPDzzzz-x (NCC ID)
Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 609501: 2006+A11:2009+A1:2010+A12:2011 Safety of Information Technology Equipment EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz300 GHz)
(IEC 62311:2007 (Modified)) EN 300 328 V1.8.1 (2012);
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 893 V1.7.1: (2012) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2 (2011) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1 (2012) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment National Authorities were informed according to Article 6.4 of Frequency Notification. Special Requirements are considered. The product is labeled with CE Marking.
This product uses the FCC Data API but is not endorsed or certified by the FCC