submitted | available | document details (if available) | source link |
---|---|---|---|
November 09 2018 | November 03 2019 |
various | Users Manual | Users Manual | 1022.65 KiB | November 09 2018 / November 03 2019 |
Sprint Magic Box Voice Amp Setup Instructions Check that all these components are in the box:
NOTE: You will also need a working electrical outlet Sprint Magic Box Voice Amp NOTE: The Magic Box Gold power supply will be used to power the Voice Amp. Tips The Voice Amp works with the Magic Box Gold only. Call in to Care to activate the Magic Box Gold Ethernet capability before installing the Voice Amp. Use the same window as the Magic Box Gold for the Voice Amp if moving both to a new window do a Factory Data Reset (from the menu) on the Magic Box Gold. Quick Start Guide Install your Sprint Magic Box Voice Amp NOTE: This guide is intended to define how to connect the Sprint Magic Box Voice Amp to the Sprint Magic Box Gold. 1. Unplug the Sprint Magic Box Gold from power. Turn the Sprint Magic Box Voice Amp to expose the back of the unit. Place the Sprint Magic Box Voice Amp along-side the Sprint Magic Box Gold. 2. Connect one end of the Ethernet cable (A) to the Sprint Magic Box Gold Ethernet connection port under the device. 3. Connect the other end of the Ethernet cable (A) to Ethernet connection port of the Sprint Magic Box Voice Amp. 4. Connect the DC to DC cable (C) to the DC Out on back of the Sprint Magic Box Voice Amp (this will be the white connector of the DC cable). 5. Connect the GOLD end of the DC to DC cable (C) to the Sprint Magic Box Gold DC power connection port under the Magic Gold Box device. 6. Connect the External GPS antenna (B) to the GPS connection port on the side of the Sprint Magic Box Voice Amp, under the cap. 7. Place the GPS antenna base on a flat surface next to a closed window. 8. Plug the Sprint Magic Gold Box power supply cable (provided with the Magic Box Gold) into the DC IN port of the Sprint Magic Box Voice Amp. 9. Plug the other end of the Sprint Magic Box Gold power supply cable into an available electrical outlet. (We recommend a surge protected outlet) NOTE: The Sprint Magic Box Gold must be connected to the Sprint network in order for the Sprint Magic Box Voice Amp to work. Sprint Magic Box Voice Amp Setup Instructions (Continued) Begin Self Installation 1. During boot-up the device LEDs will be solid green for a few seconds during initial hardware tests. This takes approximately 8 to 10 seconds. 2. The WAN LED will turn solid green; all other LEDs will be OFF. This takes approximately 2 minutes. 3. The WAN LED will stay solid green; all other LEDs will blink red. NOTE: Steps 1 through 3 are expected behavior. 4. The C-NET LED will turn solid green. This will take approximately 15 minutes. NOTE: If the WAN or C-NET are solid red after 15 minutes, call in to Care to activate the Magic Box Gold Ethernet capability before installing the Voice Amp. Take a Break Your Sprint Magic Box Voice Amp will go through a self-installation process during which it may download new software images and perform automatic synchronization between services. This process may take up to 60 minutes The unit may restart a couple of times during this process. At the end of this process, all LEDs should be solid Green:
C-NET LED: Indicates successful connection to Sprints Core Network WAN LED: Indicates successful connection to Internet GPS LED: Indicates GPS lock achieved CDMA LED Indicates CDMA Voice Services available Quick Start Guide Troubleshooting The Reset button is located on the back to the left side of the Ethernet port. Note: To prevent it being pressed accidentally the Reset button is accessible only by a pin or similar thin object. A short press (less than 9 seconds) will initiate a reset of the unit A long press (more than 10 seconds) will reset the unit to its factory default Note: The Sprint Magic Box Voice Amp will only work with the Sprint Magic Box Gold version. It will not work with other Magic Box versions. The Sprint Magic Box Gold must be connected to the Sprint network for the Voice Amp to be functional. LEDs Behavior LEDs are used to indicate - WAN, C-NET, GPS and CDMA access. Connected Not Connected Loading Need Help and Important Information If you need help with your Sprint Magic Box Voice Amp contact customer care. By using your Magic Box Voice Amp, you are accepting the Magic Box Voice Amp terms and conditions. ONLINE: sprint.com/magicbox Terms and conditions, FAQs, FCC statement, technical documentation and more The Sprint Network Tool App is available for Android users from the Google Play Store. The Sprint Network Tool App can assist customers with determining the best location to place a Magic Box device. PHONE: Sprint Customer Care (844-463-3194) For radiofrequency exposure compliance, this device must be installed and operated to provide a minimum safe distance of at least 20 cm (8 in) from all persons. WARNING 2018 SPRINT and the logo are trademarks of Sprint. Airspan and the logo are trademarks of Airspan. DUG01478 Rev 0.14
This product uses the FCC Data API but is not endorsed or certified by the FCC