U98H038 Wireless LAN 802.11a/b/g/n Device User manual revised

 

UUUssseeerrrsss MMMaaannnuuuaaalll WWWiiirrreeellleeessssss LLLAAANNN 888000222...111111aaa///bbb///ggg///nnn DDDeeevvviiiccceee Version 1.0 Information in this document is subject to change without notice. Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. PART NUMBER: U98H038 Wireless LAN 802.11a/b/g/n Device Table of Contents 1 INTRODUCTION 2 1.1 1.2 INVENTORY CHECKLIST SUPPORTED SECURITY 2 2 2 ANTENNA ATTACHMENT 3 3 WINDOWS VISTA WLAN AUTOCONFIG 5 3.1 3.2 3.3 LAUNCHING MICROSOFT WINDOWS VISTA WLAN AUTOCONFIG 5 SETTING THE NETWORK KEY AUTOMATICALLY 5 SETTING THE NETWORK KEY MANUALLY 8 3.3.1 Security) 12 No authentication (Open): Setting the Network Key (Network 3.3.2 Shared: Setting the Network Key (Network Security) 14 3.3.3 WPA-Personal Or WPA2-Personal: Setting the Network Key

(Network Security) 17 3.3.4 WPA-Enterprise Or WPA2-Enterprise: Setting the Network Key

(Network Security) 19 3.3.5 802.1X: Setting the Network Key (Network Security) 21 4 APPENDIX A: TROUBLESHOOTING 26 5 APPENDIX B: REGULATORY NOTICES 27 6 APPENDIX C: PRODUCT SPECIFICATIONS 33 Wireless LAN 802.11a/b/g/n Device 1 11 IInnttrroodduuccttiioonn Welcome!

Your PC includes a Wireless LAN 802.11a/b/g/n Device. This device allows you to establish a wireless network using your PC as a Wireless Client (Station Mode) if you already have a wireless network running. If you have already established a wireless network with access to the Internet, you can wirelessly connect this HP PC to your wireless network 11..11 IInnvveennttoorryy CChheecckklliisstt Included with your PC should be the following items for your Wireless LAN 802.11a/b/g/n Device:

Antenna (Screws to the connector on the back of your PC. See Chapter 2)

Printed Quick Install Guide 11..22 SSuuppppoorrtteedd SSeeccuurriittyy In order to secure your network from passive or active intrusion, key features are enabled on Windows Vista WLAN AutoConfig :

WPA/WPA2 personal security

WEP encryption Please see Chapter 3 for information on security settings for your Wireless LAN 802.11a/b/g/n Device . Wireless LAN 802.11a/b/g/n Device 2 22 AAnntteennnnaa AAttttaacchhmmeenntt This chapter contains instructions for antenna installation. IImmppoorrttaanntt It is assumed that there is an existing wireless LAN network with an Internet connection that has been set up on your computer prior to using Wireless LAN 802.11a/b/g/n Device. Please consult your ISP for further information. If you have already attached the antenna to your PC, please skip to Chapter 3. 1. Figure 1 shows the antenna jacks on the back of the PC and the Antenna Connectors. Figure 1: Antenna Jacks on PC Back and Connectors 2. Screw the antenna connectors to the antenna jacks. Wireless LAN 802.11a/b/g/n Device 3 Figure 2 Antenna Connectors Screwed to Jacks 3. Place the PC on a table or place the antenna in an elevated and open area to achieve the best wireless performance. Note: Make sure the middle connector is screwed to the middle antenna jack to allow the best performance. The position to which the right and left connectors are screwed does not affect the performance. Wireless LAN 802.11a/b/g/n Device 4 33 WWiinnddoowwss VViissttaa WWLLAANN AAuuttooCCoonnffiigg Note: It is assumed that there is an existing wireless network with connection to the Internet. If not, please consult your ISP for further information on establishing an Internet connection. It is necessary to complete the steps in Chapter 2 Antenna Attachment prior to using Windows Vista WLAN AutoConfig. If you have already established a wireless network with access to the Internet and you would like to wirelessly connect this PC to your wireless network, use Windows Vista WLAN AutoConfig. 33..11 LLaauunncchhiinngg MMiiccrroossoofftt WWiinnddoowwss VViissttaa WWLLAANN AAuuttooCCoonnffiigg To launch Windows Vista WLAN AutoConfig:

1. In the Systems Tray find the Wireless Networking icon. Note: There may be multiple Network icons in the system tray. Choose the one for Wireless Network Connection as shown. Figure 3: Wireless Network Icon 2. Select Connect to a network and the Wireless Network Connection dialog box will appear. 33..22 SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy AAuuttoommaattiiccaallllyy The PC will begin functioning in Station Mode (as a Client) with your Wireless LAN Network as soon as the Network Key is set-up. Wireless LAN 802.11a/b/g/n Device 5 IImmppoorrttaanntt If you do not have an existing wireless network you will need to set up your Wireless Router or Access Point prior to using your PC in Station Mode. 1. Find the Network Key (WEP Key or WPA/WPA2 Key) for your Wireless Network. 2. Select View Available Wireless Networks from the Wireless Network icon menu. 3. The Wireless Network Connection dialog box will appear. Figure 4: Wireless Network Connection dialog box 4. Select the Wireless Network of your choice by clicking on its name and the entire block will become highlighted. 5. Select Connect in the lower right corner. 6. The Wireless Network Connection dialog box will appear as shown below. Wireless LAN 802.11a/b/g/n Device 6 Figure 5: Wireless Network Connection dialog box 7. Enter the Network Key (WEP Key or WPA/WPA2 Key) for your Wireless Network. Note: If your network is using WEP encryption, a HEX or an ASCEII formats is necessary when entering your Network key.

HEX: Refer to 10 Characters in HEX notation for 40 bit or 26 characters for 128 bit encryption.

ASCII: Refer to 5 characters for 40 bit or 13 characters for 128 bit encryption. If your network is using WPA/WPA2, it is necessary to enter an 8 to 63 character alphanumeric key-phrase. The Network Key will accept any of these as it supports both WEP and WPA/WPA2. 8. Select Connect in Figure 5. 9. The Wireless Network Connection dialog box appears as you are being connected. Wireless LAN 802.11a/b/g/n Device 7 Figure 6: Connecting to Wireless dialog box After connection to the network is established, the Wireless Network Connection dialog box will reappear showing the connection status as shown in Figure 7. Figure 7: Wireless Network Connection dialog box 33..33 SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy MMaannuuaallllyy After launching the application (See Section 3.1, Launching the application), you will need to input the Network name and Network Key. The Network name and Wireless LAN 802.11a/b/g/n Device 8 Network Key must both be set up for your PC to function with your current network in Station Mode. Before manually setting up the Network name and Network Key on your PC, you must identify this information on your current wireless network:

Network name (SSID)

Security WPA-PSK Key OR Security WEP Key The Wireless Network Connection dialog box appears when you have launched Windows Vista WLAN AutoConfig:

Note: Your Network name will appear in the Available wireless networks box. Any other listed available wireless networks represent the wireless networks established within range of your PC. These will vary and do not provide secured access to the Internet. Figure 8: Wireless Network Connection dialog box 1. Choose your Wireless Network in the Available wireless networks selection box. Your network will become highlighted. 2. Click Open Network and Sharing Center in the lower left corner, the Open Network and Sharing Center window appears. Wireless LAN 802.11a/b/g/n Device 9 Figure 9: Network and Sharing Center dialog box 3. Click Manage network connections under Tasks on the left side, the Network Connections window appears. Figure 10: Network Connection dialog box 4. Right click your wireless connection icon and select Properties, click Continue in the User Account Control window (this function is open by default), the Wireless Network Connection Properties dialog box appears. Wireless LAN 802.11a/b/g/n Device 10 Figure 11: Wireless Network Connection Properties dialog box 5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties, the Internet Protocol Version 4 (TCP/IP) Properties dialog box appears. Wireless LAN 802.11a/b/g/n Device 11 Figure 12: Internet Protocol Version 4 (TCP/IPv4) Properties dialog box 6. Verify that the following choices are selected:

Obtain an IP address automatically

Obtain DNS server address automatically 7. Select OK. Note: Obtaining an IP address automatically is recommended. If static IP address settings are preferred, refer to your own wireless network settings. You are returned to the Wireless Network Connection Properties dialog box. For instructions on how to set security, refer to Section 3.3.1 to 3.3.5. 33..33..11 NNoo aauutthheennttiiccaattiioonn ((OOppeenn)):: SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy ((NNeettwwoorrkk SSeeccuurriittyy)) This section gives instruction on how to correctly set up No authentication (Open) security on your PC. In order to set up your Network Key (security feature) you will need to do the following:

Wireless LAN 802.11a/b/g/n Device 12 1. Open the Wireless Network Connection Properties dialog box:

Right click on the Wireless Networks icon in the system tray.

Select Network and Sharing Center from the Wireless Networks I con menu.

The Network and Sharing Center dialog box appears.

Click Connect to a network on the left side of the dialog box.

The Disconnect or connect to another network dialog box appears.

Select the wireless connection that you want to set the network security key. Right click the network connection and select Properties, Wireless Network Properties dialog box appears shown as below. Make sure Security tab is selected. Figure 13: Wireless Network Properties Dialog Box 2. Select None and you dont need to set security code. Click OK. 3. Select WEP in the Encryption type selection box then Network security key box will appear. Wireless LAN 802.11a/b/g/n Device 13 Figure 14: Wireless Network Properties dialog box 4. Verify that the Data Encryption is set to WEP. 5. Input the Network security key then click OK. Note: Either a HEX or ASCII format is necessary when using the WEP interface. Your WEP enabled device should already have either HEX or ASCII format pass-phrase associated.

HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.

ASCII: 5 characters for 40 bit, 13 characters for 128 bit. You are returned to the Wireless Network Connection Properties dialog box and are able to verify your connection. 33..33..22 SShhaarreedd:: SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy ((NNeettwwoorrkk SSeeccuurriittyy)) This section gives instruction on how to correctly set up Shared security on your PC. In order to set up your Network Key (Shared security feature) you will need to do the following:

Wireless LAN 802.11a/b/g/n Device 14 1. Open the Wireless Network Connection Properties dialog box:

Right click on the Wireless Networks icon in the system tray.

Select Network and Sharing Center from the Wireless Networks icon menu.

The Network and Sharing Center dialog box appears.

Click Connect to a network on the left side of the dialog box.

The Disconnect or connect to another network dialog box appears.

Select the wireless connection that you want to set the network security key. Right click the network connection and select Properties, Wireless Network Properties dialog box appears shown as below. Make sure Security tab is selected. Figure 15: Wireless Network Properties Dialog Box 2. Select Shared in the Encryption type selection box then Network security key box will appear. Wireless LAN 802.11a/b/g/n Device 15 Figure 16: Wireless Network Properties dialog box 3. Input the Network security key then click OK. Note: Either a HEX or ASCII format is necessary when using the WEP interface. Your WEP enabled device should already have either HEX or ASCII format pass-phrase associated.

HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.

ASCII: 5 characters for 40 bit or 13 characters for 128 bit. You are returned to the Wireless Network Connection Properties dialog box and are able to verify your connection. Wireless LAN 802.11a/b/g/n Device 16 33..33..33 WWPPAA--PPeerrssoonnaall OOrr WWPPAA22--PPeerrssoonnaall:: SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy

((NNeettwwoorrkk SSeeccuurriittyy)) This section gives instruction on how to correctly set up WPA2-Personal or WPA-Personal security on your PC. In order to set up your Network Key (WPA2-Personal or WPA-Personal security feature) you will need to do the following:

1. Open the Wireless Network Connection Properties dialog box:

Right click on the Wireless Networks icon in the system tray.

Select Network and Sharing Center from the Wireless Networks I con menu.

The Network and Sharing Center dialog box appears.

Click Connect to a network on the left side of the dialog box.

The Disconnect or connect to another network dialog box appears.

Select the wireless connection that you want to set the network security key. Right click the network connection and select Properties, Wireless Network Properties dialog box appears shown as below. Make sure Security tab is selected. Figure 17: Wireless Network Properties Dialog Box Wireless LAN 802.11a/b/g/n Device 17 2. Select WPA-Personal or WPA2-Personal in the Security type selection box then Wireless Network properties dialog box appears. Figure 18: Wireless Network Properties dialog box 3. Verify that the Encryption type is set to TKIP or AES. 4. Input the Network security key then click OK. Note: An 8-to-63 character alphanumeric key-phrase is necessary when using the WPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII notation common with WEP keys. Your WPA/WPA2 enabled device should already have an 8 to 63 character alphanumeric key-phrase.

HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.

ASCII: 5 characters for 40 bit, 13 characters for 128 bit. You are returned to the Wireless Network Connection Properties dialog box and are able to verify your connection. Wireless LAN 802.11a/b/g/n Device 18 33..33..44 WWPPAA--EEnntteerrpprriissee OOrr WWPPAA22--EEnntteerrpprriissee:: SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy

((NNeettwwoorrkk SSeeccuurriittyy)) This section gives instruction on how to correctly set up WPA-Enterprise OR WPA2-Enterprise security on your PC. In order to set up your Network Key (WPA-Enterprise Or WPA2-Enterprise security feature) you will need to do the following:

1. Open the Wireless Network Connection Properties dialog box:

Right click on the Wireless Networks icon in the system tray.

Select Network and Sharing Center from the Wireless Networks I con menu.

The Network and Sharing Center dialog box appears.

Click Connect to a network on the left side of the dialog box.

The Disconnect or connect to another network dialog box appears.

Select the wireless connection that you want to set the network security key. Right click the network connection and select Properties, Wireless Network Properties dialog box appears shown as below. Make sure Security tab is selected. Figure 19: Wireless Network Properties Dialog Box Wireless LAN 802.11a/b/g/n Device 19 2. Select WPA-Enterprise or WPA2-Enterprise in the Security type selection box then Wireless Network properties dialog box appears. Figure 20: Wireless Network Properties dialog box 3. Verify that the Network Authentication method is set to Protected EAP (PEAP) or Smart Card or other certificate. 4. Verify that the Encryption type is set to TKIP or AES. 5. Input the Network security key then click OK. Note: An 8-to-63 character alphanumeric key-phrase is necessary when using the WPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII notation common with WEP keys. Your WPA/WPA2 enabled device should already have an 8 to 63 character alphanumeric key-phrase.

HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.

ASCII: 5 characters for 40 bit, 13 characters for 128 bit. You are returned to the Wireless Network Connection Properties dialog box and are able to verify your connection. Wireless LAN 802.11a/b/g/n Device 20 33..33..55 880022..11XX:: SSeettttiinngg tthhee NNeettwwoorrkk KKeeyy ((NNeettwwoorrkk SSeeccuurriittyy)) This section gives instruction on how to correctly set up 802.1X security on your PC. In order to set up your Network Key (802.1X security feature) you will need to do the following:

1. Open the Wireless Network Connection Properties dialog box:

Right click on the Wireless Networks icon in the system tray.

Select Network and Sharing Center from the Wireless Networks I con menu.

The Network and Sharing Center dialog box appears.

Click Connect to a network on the left side of the dialog box.

The Disconnect or connect to another network dialog box appears.

Select the wireless connection that you want to set the network security key. Right click the network connection and select Properties, Wireless Network Properties dialog box appears shown as below. Make sure Security tab is selected. Figure 21: Wireless Network Properties Dialog Box Wireless LAN 802.11a/b/g/n Device 21 2. Select 802.1X in the Security type selection box then Wireless Network properties dialog box appears. Figure 22: Wireless Network Properties dialog box 3. Verify that the Network Authentication method is set to Protected EAP (PEAP) or Smart Card or other certificate. 4. Verify that the Encryption type is set to TKIP or AES. 5. Input the Network security key then click OK. Note: An 8-to-63 character alphanumeric key-phrase is necessary when using the WPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII notation common with WEP keys. Your WPA/WPA2 enabled device should already have an 8 to 63 character alphanumeric key-phrase.

HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.

ASCII: 5 characters for 40 bit, or 13 characters for 128 bit. You are returned to the Wireless Network Connection Properties dialog box and are able to verify your connection. Wireless LAN 802.11a/b/g/n Device 22 Terms TTeerrmmss Access Point (AP)

(American for ASCII Standard Code Information Interchange) Broadband Router Client DNS Server Encryption Router HEX DDeeffiinniittiioonn A hardware device (possibly a PC) that can act as a communication hub for wireless devices enabling them to connect to a wired LAN (Local Area Network) or to one another. A code used for encryption that represents letters with numbers. A device that lets multiple client devices share a single internet connection (like DSL, Cable modem or T1). Generally Broadband Routers offer rudimentary network address translations and firewall features. A device that acquires networking services from another device like another PC or access point. Domain Name System / Service / Server is a service available on the internet that translates domain names into IP addresses. The most efficient way to achieve data security online. Encryption is a method of coding data. Generally it is necessary to provide a secret key or password in order to receive decoded information when encrypted. A gate or entrance into a network. The ISP connecting a home to the internet is generally the router in a residence. A numbering system used in encryption. HEX is a 16 symbol system consisting of the numbers 0 9 and A F. IP Address An address that identifies devices on a TCP/IP network (eg;

192.168.0.2). ISP (Internet Service Provider) A company that provides access to the internet. Wireless LAN 802.11a/b/g/n Device 23 TTeerrmmss MAC Address DDeeffiinniittiioonn Media Access Control Address. On an 802.11 network the MAC address is used to identify each node of the network. Network Name See SSID. Network Key Network password. SSID Identifier)

(Service Set The unique identifier attached to the header of packets sent over a Wireless Local Area Network (WLAN). The SSID differentiates Wireless LANs from one another. For this reason an SSID must be entered on each wireless device attempting to connect on the WLAN. Station WEP See Client. Wired Equivalency Protocol. WEP is an 802.11 encryption standard that provides security for wireless LANs. Wireless LAN A wireless version of Ethernet, the Wireless Local Area Network enables wireless internet access through your or broadband router. Wireless Network See Wireless LAN. WPA WPA2 Wi-Fi Protected Access. WPA is an addition to the security in the 802.11 standard. It is an enhancement to the original security implementation for 802.11 devices. WPA2 is the next generation of Wi-Fi security. It is the Wi-Fi Alliance's interoperable implementation of the ratified IEEE 802.11i standard. WPA Personal AES

(Advanced Encryption Standard). See WPA/WPA2. WPA Personal TKIP

(Temporal Key Integrity Protocol). See WPA/WPA2. Wireless LAN 802.11a/b/g/n Device 24 Wireless LAN 802.11a/b/g/n Device 25 44 AAppppeennddiixx AA:: TTrroouubblleesshhoooottiinngg PPrroobblleemm RReeccoommmmeennddeedd SSoolluuttiioonn My WPA/WPA2 security settings are not working properly. Verify that your Network Keys are entered correctly. If the problem persists Reconfigure your wireless network setting to WEP security. in I am unable to see my Network name the Available wireless networks section of the Wireless Network Connection dialog box on my PC. Verify your Network name and Security settings. If the problem persists Consult the users manual Wireless Router or Access Point. for your I am having difficulty with my VPN connection. Check your VPN server problems. for related For assistance with Internet gaming issues please internet gaming site. to Microsofts refer Internet Gaming issues Wireless LAN 802.11a/b/g/n Device 26 55 AAppppeennddiixx BB:: RReegguullaattoorryy NNoottiicceess Regulatory Notices

To identify this product refer to the part or model number on the product label Federal Communication Commission Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-

-

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any including interference that may cause undesired operation. interference received, FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Wireless LAN 802.11a/b/g/n Device 27 For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. European Notices EC Conformance Declaration This device complies with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards:

EN 60950-1 - Product Safety EN 300 328 - Technical requirements for 2.4 GHz radio equipment EN 301 893 Technical requirements for 5GHz radio equipment EN 301 489-1 / EN 301 489-17 - EMC requirements for radio equipment Declaration of Conformity in Languages of the European Community English Hereby, Hon Hai Precision Ind. Co., Ltd., declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Wireless LAN 802.11a/b/g/n Device 28 Finnish Valmistaja Hon Hai Precision Ind. Co., Ltd. vakuuttaa tten ett Radio LAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart Hon Hai Precision Ind. Co., Ltd. dat het toestel Radio LAN device in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. French Swedish Danish German Bij deze Hon Hai Precision Ind. Co., Ltd. dat deze Radio LAN device voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Par la prsente Hon Hai Precision Ind. Co., Ltd. dclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Hrmed intygar Hon Hai Precision Ind. Co., Ltd. att denna Radio LAN device str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Undertegnede Hon Hai Precision Ind. Co., Ltd. erklrer herved, at flgende udstyr Radio LAN device overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt Hon Hai Precision Ind. Co., Ltd., dass sich dieser/diese/dieses Managed Accces Point in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklrt Hon Hai Precision Ltd. die bereinstimmung des Gertes RLAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) Ind. Co., Greek Hon Hai Precision Ind. Co., Ltd. RLAN device Wireless LAN 802.11a/b/g/n Device 29 1999/5/

Italian Spanish Con la presente Hon Hai Precision Ind. Co., Ltd. dichiara che questo Radio LAN device conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Por medio de la presente Hon Hai Precision Ind. Co., Ltd. declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Portuguese Hon Hai Precision Ind. Co., Ltd. declara que este Radio LAN device est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Malti Estonian Hawnhekk, Hon Hai Precision Ind. Co., Ltd., jiddikjara li dan RLAN device jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC Kesolevaga kinnitab Hon Hai Precision Ind. Co., Ltd. seadme RLAN device vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hungarian Alulrott, Hon Hai Precision Ind. Co., Ltd. nyilatkozom, hogy a RLAN device megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Slovak Czech Hon Hai Precision Ind. Co., Ltd. tmto vyhlasuje, e RLAN device spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Hon Hai Precision Ind. Co., Ltd. tmto prohlauje, e tento RLAN device je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Slovene iuo Hon Hai Precision Ind. Co., Ltd. deklaruoja, kad is RLAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Wireless LAN 802.11a/b/g/n Device 30 Lithuanian iuo Hon Hai Precision Ind. Co., Ltd. deklaruoja, kad is RLAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Latvian Ar o Hon Hai Precision Ind. Co., Ltd. deklar, ka RLAN device atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. IC CAUTION This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 3.72 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication. Caution:

The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Wireless LAN 802.11a/b/g/n Device 31 Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices. IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Wireless LAN 802.11a/b/g/n Device 32 66 AAppppeennddiixx CC:: PPrroodduucctt SSppeecciiffiiccaattiioonnss Specifications Model Number U98H038 Functional Criteria Data Rate Operating Range Radio Signal Modulation Up to 54 Mbps 802.11a/b/g/n: 30m (indoor) Direct Sequency Spread Spectrum (DSSS) Orthogonal Frequency Division Multiplexing

(OFDM) Operating Frequency USA (FCC), Canada (IC):

2412~2462 MHz 5150~5250 MHz & 5725~5850 MHz Europe (CE):

2412~2472 MHz 5150~5250 MHz & 5725~5850 MHz Operating Channel USA, Canada:

11 Channels for 802.11b/g 9 Channels for 5 GHz Europe:

13 Channels for 802.11b/g (7 for France) Wireless LAN 802.11a/b/g/n Device 33 9 Channels for 5 GHz Physical Characteristics Power Consumption TX: 810 mA Max; RX: 260 mA Dimensions Antenna LED Indicator 122 x 81 x 14 mm (4.80 x 3.19 x 0.55 in.) External Antenna Power / Link(Green):

Blink: Radio on and scanning, On: Link established ACT(Green):

Blink: Data transmitting Host Interface PCI specification v.2.3 Standards Conformance Wireless Standard IEEE 802.11a/b/g/n, Wi-Fi, WPA/WPA2 Environmental Temperature Humidity Certification Operating: 0 to 55 C (32 to 131 F) Storage: -20 to 75 C (-4 to 167 F) 5 to 90% (non-condensing) Wireless LAN 802.11a/b/g/n Device 34 Emissions Safety Radio EN 301489-1/-17 FCC Part 15 Subpart B ICES-003 EN60950-1 EN300328, EN301893 FCC Part 15 Subpart C & Subpart E IC RSS-210 Software Drivers NDIS Drivers Windows Vista Antenna Specification Antenna Type Frequency Band Polarization Connector Gain Radiation External Antenna 2.4 ~ 2.5GHz 5.15~5.25GHz & 5.725~5.85GHz Vertical Reverse SMA Connector 802.11a/b/g/n:

Peak gain: 1.5 dBi Omni-directional Wireless LAN 802.11a/b/g/n Device 35 77