Label information Model:HSC-I01R
1.
Images of the e-label screen are provided below:
RMN:HSC-I001R
FCC ID: B94HCI01RPD
IC ID: 466X-B94HCI01RPD
Contains FCC ID: PD9AX201D2
Contains IC: 1000M-AX201D2
2.
The information that will be displayed on the e-label and information that will remain in the user manual
is shown below:
Information
on E-label
In Manual
FCC ID/IC number
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.”)
Class A / B Digital Device user manual statements1
Yes
No
No
Yes
No
Yes
3. Users are able to access the information in no more than three steps in a device’s menu by following
below steps.
Turn on or restart the computer.
A.
B. Press esc or f10 to enter Computer Setup.
C. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press
D. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items,
enter.
and then press OK.
---------------------------------------------------------------------------------------------------------------------------------------------
NOTE: The list of available electronic label items varies depending on the computer model and
installed devices.
---------------------------------------------------------------------------------------------------------------------------------------------
E.
To exit Computer Setup menus without making any changes:
Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.
- or –
Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter.
No special access codes or permissions are required to go through the above steps beyond entering a user-
defined password to protect against unauthorized access to the device.
The information is stored on the device, no special accessories or supplemental plug-ins
(e.g., a SIM/USIM card) are required to access the information.
No.
5. Users are provided specific instructions on how to access the information.
4.
6.
Yes.
The above information must be programmed by the responsible party and the information must be
secured in such a manner that third-parties cannot modify it.
The e-label information is pre-programmed by the manufacturer. The user cannot modify the e-label
formation.