W79M1510S WiFi Module. User Manual

 

PRODUCT SPECIFICATION Version 1.1 IEEE 802.11 b/g/n 1T/1R USB Module Model Number: W79M1510S Custom Approval Section Custom Name Department Approval Date DESIGN 2015-08-10 CHECK APPROVAL HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA 75 TEL07522096932 FAX07522096628 E-mail wangsy@hz-gsd.com PRODUCTS SPECIFICATION W79M1510S Revision Document revision history Date Approved by Remarks Version 1.0 2015-07-20 Draft Version 1.1 2015-08-10 Update Page4:Add Schematic diagram Page5:Add Part List Page10:Add label list &Package Page12:Add Antenna Specifications PAGE 2 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S 1. General Description This document is to specify the product requirements for 802.11 b/g/n USB Module.This Module is based on Media Tek MT7601U chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4G-2.5GHz,and it can be used to provide up to 54Mbps for 802.11g,11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11 b, 802.11 g, 802.11n Access Points through the wireless LAN. 2. Features Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11n standard to provide wireless 150Mbps data rate. Operation at 2.4G-2.5GHz frequency band to meet worldwide regulations Supports WEP ,WPA ,WPA2,TKIP,AES enhanced security Drivers support Windows XP 32/64, 2000, 7,Vista 32/64, Linux OS High speed USB 2.0 interface RoHS compliant PAGE 3 OF 13 Version1.1 PRODUCTS SPECIFICATION 3. Application Diagrams 3.1 Functional Block Diagram W79M1510S 3.2 Schematic diagram PAGE 4 OF 13 Version1.1 W79M1510S Manufacturer MTK GUOCHAN Murata WALSIH ,HK resistor Muralist GUOCHAN GUOCHAN PRODUCTS SPECIFICATION Specification model MT7601U G5728 0201/50V/1pF/0.1pF/COG 0201/16V/100nF/10/X5R 0402/50V/0.5pF/0.1pF/C0G 0402/50V/1.2pF/0.1pF/C0G 0402/50V/4.7pF/0.25pF/C0G 0402/50V/5.6pF/0.25pF/C0G 0402/50V/10pF/0.5pF/C0G 0402/50V/47pF/5%/C0G 0402/50V/100pF/5%/C0G 0402/16V/100nF/10/X7R 0402/10V/1uF/10/X5R 0603/6.3V/10uF/20%/X5R 0201 1/20W 100K 5%

0402 1/16W 0 5%

0402 1/16W 8.2K 1%

0402 1/16W 10K 5%

0402 1/16W 22K 5%

0402 1/16W 24K 1%

0402 1/16W 100K 5%

0402/1.0nH/0.3nH 0402/2.7nH/5%

0402/18nH/5%

0805/4.7uH/20%/700mA 40MHz,CL=15pF10ppmLF SMD/3.2X2.5 1.25mm/WS/5/

/A1253WRA-S5PN6BT1T00R WF7E(

Number 1 1 1 2 1 2 2 2 1 1 1 11 7 2 1 4 1 1 1 1 1 1 2 2 1 1 1 1 4. Part List 4.1 Part List Type IC Capacitance Resistance Inductance Crystal oscillator Connector Shield PAGE 5 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S 5. General Requirements 5.1 IEEE 802.11b Section

#

5.2 IEEE 802.11g Section 5.1.1 5.1.2 5.1.3 5.1.4 5.1.5 5.1.6 5.1.7 5.1.8

#

5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 Feature Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Feature Standard Radio and Modulation Type Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Detailed Description IEEE 802.11b DQPSK , DBPSK , DSSS , and CCK 2400 2497MHz ISM band 11 channels for United States 13 channels for Europe Countries(Default) 14 channels for Japan 11,5.5,2,and 1Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25degree C 17dBm(2dB) at 1,2,5.5,11Mbps Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% at room Temp 25 degree C

-90 dBm at 2Mbps

-81 dBm for 11Mbps Detailed Description IEEE 802.11g QPSK , BPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries(Default) 13 channels for Japan 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain, Data Rate and at roomTemp. 25 degree C 172dB dBm at 6,9Mbps 172dB dBm at 12,18Mbps 172dB dBm at 24,36Mbps 162dB dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate=10% at room Temp 25 degree C

-87 dBm at 6Mbps

-86 dBm at 9Mbps

-84 dBm at 12Mbps

-82 dBm at 18Mbps

-80 dBm at 24Mbps

-76 dBm at 36Mbps

-72 dBm at 48Mbps PAGE 6 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S 5.3 IEEE 802.11n Section

#

5.3.1 5.3.2 5.3.3 Feature Standard Radio and Modulation Type Operating Frequency 5.3.4 Data Rate(Mbps) 5.3.5 Media Access Protocol 5.3.6 Transmitter Output Power at Antenna Connector 5.3.7 Receiver Sensitivity at Antenna Connector

-71 dBm at 54Mbps Detailed Description IEEE 802.11n BPSK , QPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz MCS GI=800ns 20MHz 6.5 13 19.5 26 39 52 58.5 65 0 1 2 3 4 5 6 7 CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain,Data 40MHz 15 30 45 60 90 120 135 150 40MH 13.5 27 40.5 54 81 108 121.5 135 GI=400ns 20MHz 7.2 14.4 21.7 28.9 43.3 57.8 65.0 72.2 Rate and at roomTemp. 25degree C HT-20 162dBm at MCS0~7 HT-40 162dBm at MCS0~7 Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=10% at roomTemp. 25degree C HT-20

-87dBm at MCS0/8

-84dBm at MCS1/9

-82dBm at MCS2/10

-79dBm at MCS3/11

-76dBm at MCS4/12

-72dBm at MCS5/13

-70dBm at MCS6/14

-69dBm at MCS7/15 HT-40

-84dBm at MCS0/8

-81dBm at MCS1/9

-80dBm at MCS2/10

-76dBm at MCS3/11

-73dBm at MCS4/12

-69dBm at MCS5/13

-68dBm at MCS6/14

-66dBm at MCS7/15 PAGE 7 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S 6. Electrical and Thermal Characteristics 6.1 Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature Minimum Maximum

-40 0 0

+80

+60

+125 Units 6.2 General Section Feature

#

6.2.1 Antenna Type 6.2.2 Operating Voltage 6.2.3 Current Consumption 350mA at continuous transmit mode 6.2.4 Form Factor Detailed Description PIFA antenna 5.0V10%

220mA at receive mode w/o receiving packet High Speed USB2.0 Interface and 1.25-5 pin connector (see appendix) Windows XP 32/64, 2000, 7,Vista 32/64, Linux OS WEP ,WPA ,WPA2,TKIP,AES 6.4 Mechanical Requirements Interface 6.2.5 Connector 6.3 Software Driver Security

#

Feature 6.4.1 Length 6.4.2 Width 6.4.3 Height Detailed Description 38mm(PCB) MAX38.9mm 26mm 1.0mm(PCB) MAX5.2mm 6.5 Mechanical Dimensions PAGE 8 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S 1*0.3mm. 6.6 Pin Description 1.25-5 Pin connector Pin Definition Power_EN 1 2 GND 3 D+

4 D-

5 VCC(5V) PAGE 9 OF 13 Version1.1 PRODUCTS SPECIFICATION 7. label list &Package 7.1 Module label W79M1510S 7.2 box label PAGE 10 OF 13 Version1.1 PRODUCTS SPECIFICATION 7.3 Package W79M1510S 50PCS2000PCS PAGE 11 OF 13 Version1.1 PRODUCTS SPECIFICATION appendix 1: 1.25mm*5PIN SMT connector W79M1510S appendix 2: Antenna Specifications 2.1 Antenna shape chart PAGE 12 OF 13 Version1.1 PRODUCTS SPECIFICATION 2.2 Smith chart W79M1510S 2.3 Direction chart PAGE 13 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S appendix 3:Statement FCC Important Notes:

(1) FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

(2) Co-location Warning:

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

(3) OEM integration instructions:

This device is intended only for OEM integrators under the following conditions:

The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).

(4) Validity of using the module certification:

In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

(5) End product labeling:

The final end product must be labeled in a visible area with the following:

Contains Transmitter Module FCC ID: 2AC23-W79M1510S.

(6) Information that must be placed in the end user manual:

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. PAGE 14 OF 13 Version1.1 PRODUCTS SPECIFICATION W79M1510S FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. IC Statement

- English: "

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device."

The final end product must be labeled in a visible area with the following:

Contains Transmitter Module IC ID: 12290A-W79M1510S.

- French:"

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

PAGE 15 OF 13 Version1.1