AC210E6GG DIGITAL CAR AUDIO SYSTEM User Manual Part 2

 

H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 61 iPod MODE Using iPod Mode Playing/Pausing iPod Songs Once an iPod is connected, the mode will automatically start and begin playing an iPod song.

<For RDS model>

While playing, press the to pause and press play. button button to NOTICE iPods with unsupported communi-

cation protocols may not properly operate in the audio system. Changing Songs Press the the previous or next song. SEEK TRACK key to move to NOTICE Pressing the SEEK TRACK key after the song has been playing for 2 sec-

onds will start the current song from the beginning. SEEK TRACK key before the song has been playing for 1 sec-

onds will start the previous song. Pressing the Slight time differences may exist depending your iPod product. Rewinding / Fast-forwarding Songs While playing, press and hold the key (over 0.8 seconds) to rewind or fast-forward the current song. SEEK TRACK Searching Categories Turn the search for the desired category. TUNE knob left/right to 4 M u l t i i m e d a S y s t e m

<For RDS model>

4-61 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 62 Multimedia System Once you find the desired category, press the TUNE knob to select and play. NOTICE There are eight categories that can be searched, including Playlists, Artists, Albums, Genres, Songs, Composers, Audiobooks and Podcasts. 1. 2. 3.

: Displays the play screen

(Home): Moves to the iPod root category screen

: Moves to the previous cate-

gory NOTICE If the search mode is accessed while playing a song, the most recently searched category is dis-

played. Search steps upon initial connec-

tion may differ depending on the type of iPod device. Category Menu Within the iPod Category menu,

, you will have access to the

, and features.

<For RDS model>

4-62 iPod Mode Menu Within this mode, you will have access the Random(Shuffle), Repeat and List features. to

<For RDS model>

Random(Shuffle) Press the

) button to

(

play songs in random(Shuffle) order.

Random(Shuffle) All : Plays all Shuffle songs in Random(Shuffle) order. H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 63

(

Repeat Repeat Press the

) button to repeat the current song. Press the button again to turn the repeat fea-

ture off.

Repeat : Repeats the current song List Press the display the Category Menu. List

(

) button to 4 M u l t i i m e d a S y s t e m

<For RDS model>

TUNE knob left/right to Turn the search for the desired category. Once you find the desired category, press the TUNE knob to select and play. 4-63 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 64 Multimedia System AUX MODE Using AUX Mode Press the MEDIA key Select [AUX]

Connecting an External Device External audio players (Camcorders, car VCR, etc.) can be played through a dedicated cable. An external device can be connected to play music. 4-64 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 65 MY MUSIC MODE Using My Music Mode Playing/Pausing My Music Files

<For RDS model>

While playing, press the to pause and press play. button button to NOTICE If there are no files saved within My Music, the button will be disabled. My Music Selecting from the List Turn the search for the desired file. TUNE knob left/right to Changing Files Press the the previous or next file. SEEK TRACK key to move to NOTICE Pressing the SEEK TRACK key after the file has been playing for 2 sec-

onds will start the current file from the beginning. SEEK TRACK key before the file has been playing for 1 sec-

onds will start the previous file. Pressing the

<For RDS model>

Once you find the desired file, press the TUNE knob to start playing. 4-65 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 66 Multimedia System Rewinding / Fast-forwarding Files While playing, press and hold the key to rewind or fast-for-

SEEK TRACK ward the current file. Scan Press the 10 seconds of each file. SCAN key to play the first 4-66 My Music Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat, Delete and List features. NOTICE The title, artist and album info are displayed only when such informa-

tion is recorded within the MP3 file ID3 tag. Random Press the

) button to play files in random order. Press the button again to turn the Random fea-

ture off. Shuffle

(

<For RDS model>

Repeat Press the

) button to repeat the current song. Press the button again to turn the repeat fea-

ture off. Repeat

(

Deleting Files Press the delete the current file.

(

Delete

) button to Info Press the

) button to display details about the current file. Info

(

H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 67 List Press the List file list screen. button to display the List Menu From the List screen, it is possible to delete files you previously saved into My Music. 1) 2) 3) 4)

: Moves to the previous screen

(Selects all) : Selects all files

(Unselect All) : Deselects all selected files

(Delete) : Deletes selected files After selecting the files you want to delete, press the

) button to delete the selected files. Delete

(

4

<For RDS model>

<For RDS model>

NOTICE If there is memory available, up to 6,000 files can be saved. Identical files cannot be copied more than 1,000 times. To check memory information, go

[Memory

[System]

SETUP to Information]

Turn the TUNE knob left/right to search for files. Once the desired file is displayed, press the knob to select and play.

(

) button or Press the individually select the files you want to delete. Once files are selected, the Select All M u l t i i m e d a S y s t e m

(

Delete

(

Unselect All

) button and

) buttons will be enabled. 4-67 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 68 Multimedia System Bluetooth Wireless Technology AUDIO MODE

(for Bluetooth Wireless Technology equipped model) Using Bluetooth Wireless Technology Audio Mode Playing/Pausing Bluetooth Wireless Technology Audio Once a Bluetooth Wireless Technology device is connected, the mode will automatically start. While playing, press the to pause and press play. button button to 4-68 NOTICE If the Bluetooth Wireless Technology audio is not operating properly, check whether the feature is turned off at

[Audio

(Streaming Audio). If the feature is off, turn back on and try again. streaming]

[Phone]

SETUP If music is not yet playing from your Bluetooth mobile device after converting to Wireless Technology Audio mode, pressing the play but-

ton once may start playing the mode. Check to see that music is playing Wireless Technology device after Wireless converting to Bluetooth the Bluetooth from Technology Audio Mode. NOTICE The play/pause feature may operate differently depending on the mobile phone. Changing Files Press the the previous or next file. SEEK TRACK key to move to SETUP to display Setting Connection If a Bluetooth Wireless Technology device has not been connected, key

[Phone] but-

press the the Bluetooth ton Wireless Technology connection screen. It is possible to use the pair phone, connect/disconnect and delete fea-

tures from your Bluetooth Wireless Technology phone. H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 69 BluetoothWireless Technology

(for RDS, Bluetooth Wireless Technology equipped model) Using BluetoothWireless Technology Handsfree

Bluetooth Wireless Technology Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth Wireless Technology mobile phones through the audio system.

Bluetooth Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect vari-

ous devices within a certain dis-

tance.

Supported within PCs, external devices, Bluetooth Wireless Technology phones, PDAs, vari-

ous electronic devices, and auto-

motive environments, Bluetooth Wireless Technology allows data to be transmitted at high speeds with-

out having to use a connector cable. CAUTION

Bluetooth Wireless Technology Handsfree is a feature that enables drivers to practice safe driving. Connecting the car audio system with a Bluetooth Wireless Technology phone allows the user to conveniently make calls, receive calls, and manage the phone book. Before using the Bluetooth Wireless Technology , carefully read the contents of this users manual.

Excessive use or operations while driving may lead to negli-

gent driving practices and be the cause of accidents.

Do not operate the device exces-

sively while driving.

Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driv-

ing, view the screen only for short periods of time. 4-69 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 70 Multimedia System NOTICE - USING UPON CONNECTING Bluetooth Wireless Technology PHONE Before connecting the car audio system with the mobile phone, check to see that the mobile phone supports Bluetooth Wireless Technology features. Even if the phone supports Bluetooth Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth Wireless Technology power is turned off. Disable the hidden state or turn on the Bluetooth Wireless Technology power prior to searching/connecting with the car audio system. If you do not want to automatically connect your Bluetooth Wireless Technology phone, try the following. 1. Turn off the Bluetooth Wireless Technology feature in your mobile phone.

- For more information on Bluetooth Wireless Technology features within your mobile, refer to your mobile phone users manual. 2. Turn off the Bluetooth Wireless Technology feature in your car audio system.

(Continued) 4-70

(Continued)

- To turn off the Bluetooth Wireless Technology feature in your car audio system, go to

[Phone] and

[turn off] the Bluetooth Wireless Technology feature. SETUP Park the vehicle when connecting the car audio system with your mobile phone. Bluetooth Wireless Technology con-

nection may become intermittently disconnected in some mobile phones. Follow these steps to try again. 1. Turn the Bluetooth Wireless Technology function within the mobile phone off/on and try again. 2. Turn the mobile phone power Off/On and try again. 3 Completely remove the mobile phone battery, reboot, and then again. 4. Reboot the audio system and try again. 5. Delete all paired devices, pair and try again. The Handsfree call volume and quali-

ty may differ depending on the mobile phone.

(Continued)

(Continued) Bluetooth Wireless Technology fea-

tures supported within the vehicle are as follows. Some features may not be supported your Bluetooth Wireless Technologydevice.

- Answering and placing Bluetooth Wireless Technology Handsfree calls

- Menu operation during call (Switch to Private, Switch to call waiting, Outgoing volume) depending on

- Download Call History

- Download Mobile Phone book

- Phone book/Call History Auto Download

-Bluetooth Wireless Technology device auto connection - Bluetooth Wireless Technology Audio It is possible to pair up to five Bluetooth Wireless Technology devices to the car system. one Bluetooth Wireless Technology device can be connected at a time. Other devices cannot be paired while a Bluetooth Wireless Technologydevice is already connected. When a Bluetooth Wireless Technology device is being connected, the connec-

tion process cannot be canceled. Only

(Continued) H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 71 Pairing a Bluetooth Wireless Technology wireless technolo-

gy Device What is Bluetooth Wireless Technology Pairing?

Pairing refers to the process of syn-

chronizing your Bluetooth Wireless Technology phone or device with the car audio system for connection. Pairing is necessary to connect and use Wireless Technology feature. the Bluetooth

(Continued) Only Bluetooth Wireless Technology Handsfree and Bluetooth Wireless Technology audio related features will operate within this system. Normal operation is possible only for devices that support Handsfree or audio features, such as a Bluetooth Wireless Technology mobile phone or a Bluetooth Wireless Technology audio device. Only one function can be used at a time the Bluetooth Wireless between Technology Handsfree and Bluetooth Wireless Technology audio. (While playing Bluetooth Wireless Technology audio, streaming will end upon entering the Bluetooth Wireless Technology phone screen.) If a connected Bluetooth Wireless Technology device becomes discon-

nected for various reasons, such as being out of range, turning the device OFF, or a Bluetooth Wireless Technology communication error, Bluetooth Wireless Technology devices are automatically searched and connected. Placing the audio system within an electromagnetic environment may result in noise interference. PHONE Pairing on the Steering Remote Controller Key /

Key When No Devices have been Paired 1. Press the key or the PHONE key on the steering remote con-

troller. The following screen is dis-

played. 2. Press the button to enter the Pair Phone screen. 4 M u l t i i m e d a S y s t e m 4-71 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 72 Multimedia System NOTICE Pairing through [PHONE]

Setup Press

[Phone] Select Select TUNE knob SETUP key the

[Pair Phone]

Select connected, pressing key or the If Bluetooth Wireless Technology devices are paired but none are cur-

rently the PHONE key on the steering remote controller displays the following screen. Press the [Pair] but-

ton to pair a new device or press the

[Connect] to connect a previously pair device. 1. The following steps are the same as the steps described in the When No Devices have been Paired section. 1) Device : Name of device as shown when your Bluetooth Wireless Technology device searching from 2) Passkey : Passkey used to pair the device 3. From your Bluetooth Wireless Technology device (i.e. Mobile Phone), search and select your car audio system. 4. After a few moments, a screen is displayed where the passkey is entered. Here, enter the passkey 0000 to pair your Bluetooth Wireless Technology device with the car audio system. 5. Once pairing is complete, the fol-

lowing screen is displayed. 4-72 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 73 NOTICE The waiting period during phone pair-

ing will last for one minute. The pair-

ing process will fail if the device is not paired within the given time. If the pairing process fails, you must start the process from the beginning. Generally, most Bluetooth Wireless Technology devices will automatically connect once pairing is complete. However, some devices may require a separate verification process to con-

nect. Check to see whether Bluetooth Wireless Technology has been proper-

ly connected within your mobile phone. List of paired Bluetooth Wireless Technology devices can be viewed at SETUP Phone List].

[Paired

[Phone]

Connecting a Device Press key Select

[Phone] Select [Paired Phone List]

SETUP the From the paired phone list, select the device you want to connect and press the button. 4 M u l t i i m e d a S y s t e m 1) Connected Phone : Device that is cur-

rently connected 2) Paired Phone : Device that is paired but not connected 4-73 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 74 Multimedia System Changing Priority What is Priority?

It is possible to pair up to five Bluetooth Wireless Technology devices with the car audio system. As a result, the Change Priority fea-

ture is used to set the connection pri-

ority of paired phones. However, the most recently connected phone will always be set as the highest priority. From the paired phone list, select the phone you want to change to the highest priority, then press the button from the Menu. The selected device will be changed to the high-

est priority. Press key Select

[Phone] Select [Paired Phone List]

SETUP the Disconnecting a Device Press key Select

[Phone] Select [Paired Phone List]

SETUP the From the paired phone list, select the currently connected device and press the button. 4-74 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 75 Deleting a Device Press key Select SETUP

[Phone] Select [Paired Phone List]

the USING Bluetooth Wireless Technology 1) Dial Number : Displays the dial screen where numbers can be dialed to make calls 2) Call History : Displays the call history Phone Menu Screen list screen Phone Menus With a Bluetooth Wireless Technology device connected, press the key to display the Phone menu screen. PHONE From the paired phone list, select the device you want to delete and press the button. NOTICE When deleting the currently connect-

ed device, the device will automatical-

ly be disconnected to proceed with the deleting process. If a paired Bluetooth Wireless Technology device is deleted, the devices call history and phone book data will also be deleted. To re-use a deleted device, you must pair the device again. 3) Phone book : Displays the Phone book list screen 4) Setup : Displays Phone related set-

tings NOTICE If you press the [Call History] button but there is no call history data, a prompt is displayed which asks whether to download call history data. If you press the [Phone book] button but there is no phone book data, a prompt is displayed which asks whether to download phone book data. This feature may not be supported in some mobile phones. For more infor-

mation on download support, refer to your mobile phone users manual. 4-75 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 76 Multimedia System Calling by Dialing a Number Answering Calls Press the Number]

PHONE key Select [Dial Answering a Call Answering a call with a Bluetooth Wireless Technology device connect-

ed will display the following screen. NOTICE When the incoming call pop-up is dis-

played, most Audio and SETUP mode features will not operate. Only the call volume can be operated. The telephone number may not be properly displayed in some mobile phones. When a call is answered with the mobile phone, the call mode will auto-

matically convert to Private mode. 1) Dial Pad : Used to enter phone num-

ber 2) Call : If a number has been entered, calls the number If no number has been entered, switches to call history screen 3) End : Deletes the entered phone num-

ber 4) Delete : Deletes entered numbers one digit at a time 1) Caller : Displays the other parts name when the incoming caller is saved within your phone book 2) Incoming Number : Displays the incoming number 3) Accept : Accept the incoming call 4) Reject : Reject the incoming call 4-76 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 77 During a Handsfree Call Call History Press the History]

PHONE key Select [Call 1)Caller : Displays the other partys name if the incoming caller is saved within your phone book 2)Incoming Number

: Displays the incoming number 3) Call time : Displays the call time 4) End : Ends call 5) Private : Converts to Private mode 6) Out Vol. : Sets call volume as heard by the other party A list of incoming, outgoing and missed calls is displayed. Press the [Download] button to download the call history. 1) Call History :

- Displays recent calls (call history)

- Connects call upon selection 2) Download : Download Recent Call 7) Mute : Turns Mic Mute On/Off History NOTICE If the mic is muted, the other party will not be able to hear your voice. NOTICE The call history list will display up to 30 outgoing, incoming, and missed calls. Upon downloading call histories, pre-

viously saved histories are deleted. Incoming calls with hidden caller IDs will not be saved in the call history list. Previously saved phone book entries are stored even if a device is discon-

nected and re-connected. The download feature may not be sup-

ported in some mobile phones. Check to see that the Bluetooth Wireless Technology device supports the down-

load feature. 4-77 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 78 NOTICE Up to 1,000 phone book entries can be copied into car phone book. Upon downloading phone book data, previously saved phone book data will be deleted. Downloading is not possible if the phone book download feature is turned off within the Bluetooth Wireless Technology device. Also, some devices may require device authorization upon attempting to download. If downloading cannot be normally conducted, check the Bluetooth Wireless Technology device setting or the screen state. Caller ID information will not be dis-

played for unsaved callers. The download feature may not be sup-

ported in some mobile phones. Check to see that the Bluetooth Wireless Technology device supports the down-

load feature. Multimedia System Phone Book Press the

[Phone book]

PHONE key Select The list of saved phone book entries is displayed. Press the [Download] button to download the call history. 1) Phone book List :

-Displays downloaded phone book entries

-Connects call upon selection 2) Download : Download phone book entries 4-78 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 79 Pairing Key on the Steering Remote Controller Key /

PHONE When No Devices have been Paired 1. Press the key or the PHONE key on the steering remote con-

troller. The following screen is dis-

played. 2. Press the button to enter the Pair Phone screen. Bluetooth Wireless Technology

(for Bluetooth Wireless Technology equipped model) Pairing a Bluetooth Wireless Technology wireless technolo-

gy Device What is Bluetooth Wireless Technology Pairing?

Pairing refers to the process of syn-

chronizing your Bluetooth Wireless Technology phone or device with the car audio system for connection. Pairing is necessary to connect and use Wireless Technology feature. the Bluetooth 1) Device : Name of device as shown when searching from your Bluetooth Wireless Technology device 2) Passkey : Passkey used to pair the device 3. From your Bluetooth Wireless Technology device (i.e. Mobile Phone), search and select your car audio system. 4. After a few moments, a screen is displayed where the passkey is entered. Here, enter the passkey 0000 to pair your Bluetooth Wireless Technology device with the car audio system. 5. Once pairing is complete, the fol-

lowing screen is displayed. 4-79 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 80 Multimedia System NOTICE Pairing through [PHONE]

Setup Press

[Phone] Select Select TUNE knob SETUP key the

[Pair Phone]

Select connected, pressing key or the If Bluetooth Wireless Technology devices are paired but none are cur-

rently the PHONE key on the steering remote controller displays the following screen. Press the [Pair] but-

ton to pair a new device or press the

[Connect] to connect a previously pair device. 1. The following steps are the same as the steps described in the When No Devices have been Paired section. 4-80 NOTICE The waiting period during phone pairing will last for one minute. The pairing process will fail if the device is not paired within the given time. If the pairing process fails, you must start the process from the beginning. Generally, most Bluetooth Wireless Technology devices will automatically connect once pairing is complete. However, some devices may require a separate verification process to con-

nect. Check to see whether Bluetooth Wireless Technology has been prop-

erly connected within your mobile phone. List of paired Bluetooth Wireless Technology devices can be viewed at SETUP Phone List].

[Paired

[Phone]

H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 81 Connecting a Device Press key Select

[Phone] Select [Paired Phone List]

SETUP the From the paired phone list, select the device you want to connect and press the Connect button. Changing Priority What is Priority?

It is possible to pair up to five Bluetooth Wireless Technology devices with the car audio system. As a result, the Change Priority fea-

ture is used to set the connection pri-

ority of paired phones. However, the most recently connected phone will always be set as the highest priority. 4 1) Connected Phone : Device that is cur-

rently connected 2) Paired Phone : Device that is paired but not connected Press the SETUP key Select [Phone]

Select [Paired Phone List]

4-81 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 82 Disconnecting a Device Deleting a Device Press key Select

[Phone] Select [Paired Phone List]

SETUP the Press key Select

[Phone] Select [Paired Phone List]

SETUP the From the paired phone list, select the currently connected device and press the Disconnect button. From the paired phone list, select the device you want to delete and press the Delete button. Multimedia System From the paired phone list, select the phone you want to change to the highest priority, then press the button from the Menu. Change priority The selected device will be changed to the highest priority. 4-82 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 83 NOTICE When deleting the currently connect-

ed device, the device will automatical-

ly be disconnected to proceed with the deleting process. If a paired Bluetooth Wireless Technology device is deleted, the devices call history and contacts data will also be deleted. To re-use a deleted device, you must pair the device again. USING Bluetooth Wireless Technology Phone Menu Screen Phone Menus With a Bluetooth Wireless Technology device connected, press the key to display the Phone menu screen. PHONE 4) Setup : Displays Phone related set-

tings NOTICE If you press the [Call History] button but there is no call history data, a prompt is displayed which asks whether to download call history data. If you press the [contacts] button but there is no contacs data, a prompt is displayed which asks whether to download contacts data. This feature may not be supported in some mobile phones. For more infor-

mation on download support, refer to your mobile phone users manual. 1) Dial Number : Displays the dial screen where numbers can be dialed to make calls 2) Call History : Displays the call history list screen 3) Contacts : Displays the Contacts list screen 4-83 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 84 Multimedia System Calling by Dialing a Number Answering Calls Press the Number]

PHONE key Select [Dial Answering a Call Answering a call with a Bluetooth Wireless Technology device connect-

ed will display the following screen. NOTICE When the incoming call pop-up is dis-

played, most Audio and SETUP mode features will not operate. Only the call volume can be operated. The telephone number may not be properly displayed in some mobile phones. When a call is answered with the mobile phone, the call mode will auto-

matically convert to Private mode. 1) Dial Pad : Used to enter phone num-

ber 2) Call : If a number has been entered, calls the number If no number has been entered, switches to call history screen 3) End : Deletes the entered phone num-

ber 4) Delete : Deletes entered numbers one digit at a time 1) Caller : Displays the other parts name when the incoming caller is saved within your contacts 2) Incoming Number : Displays the incoming number 3) Accept : Accept the incoming call 4) Reject : Reject the incoming call 4-84 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 85 During a Handsfree Call Call History Press the History]

PHONE key Select [Call Contacts Press

[Contacts]

the PHONE key Select 4 1) Caller : Displays the other partys name if the incoming caller is saved within your contacts 2) Incoming Number : Displays the incoming number 3) Call time : Displays the call time 4) End : Ends call 5) Private : Converts to Private mode 6) Out Vol. : Sets call volume as heard by the other party A list of incoming, outgoing and missed calls is displayed. Press the the call history. button to download Download 1) Call History :

- Displays recent calls (call history)

- Connects call upon selection 2) Download : Download Recent Call 7) Mute : Turns Mic Mute On/Off History NOTICE If the mic is muted, the other party will not be able to hear your voice. The list of saved phone book entries is displayed. Press the button to download the call history. Download 1) Contacts List :

- Displays downloaded contacts entries

- Connects call upon selection 2) Download : Download contacts entries 4-85 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:43 AM Page 86 Multimedia System NOTICE Up to 1,000 contacts entries can be copied into car contacts. Upon downloading contacts data, pre-

viously saved contacts data will be deleted. Downloading is not possible if the con-

tacts download feature is turned off within the Bluetooth Wireless Technology device. Also, some devices may require device authorization upon attempting to download. If downloading cannot be normally con-

ducted, check the Bluetooth Wireless Technology device setting or the screen state. Caller ID information will not be dis-

played for unsaved callers. The download feature may not be sup-

ported in some mobile phones. Check to see that the Bluetooth Wireless Technology device supports the down-

load feature. 4-86 NOTICE - USING THE Voice Recognition When using the voice recognition fea-

ture, only commands listed within the user's manual are supported. Be aware that during the operation of the voice recognition system, pressing any key other than the key or touching the screen will terminate voice recognition mode. For superior voice recognition per-

formance, position the microphone used for voice recognition above the head of the drivers seat and maintain a proper position when saying com-

mands. Within the following situations, voice recognition may not function properly due to external sound.

- When the windows and sunroof are open

- When the wind of the cooling / heat-

ing device is strong

- When entering and passing through tunnels

- When driving on rugged and uneven roads

- During severe rain (heavy rains, windstorms) Phone related voice commands can be used only when a Bluetooth Wireless Technology device is connected. When making calls by stating a name, the corresponding contact must be downloaded and stored within the audio system. After downloading the Bluetooth Wireless Technology phone book, it takes some times to convert the phone book data into voice information. During this time, voice recognition may not properly operate. Pronounce the voice commands natu-

rally and clearly as if in a normal con-

versation. H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 87 VOICE RECOGNITION

(if equipped) Using Voice Recognition Starting Voice Recognition Shortly press the key on the steering remote controller .Say a command If voice recognition is in [Normal Mode], then the system will say Please say a command. Beep~

If voice recognition is in [Expert Mode], then the system will only say a Beep~

To change the Normal Mode/Expert Mode setting, go

[System]

[Prompt Feedback]. to SETUP Re-starting Voice Recognition While system waits for a command Shortly press the key on the steering remote controller (under 0.8 seconds) The command wait state is immediately ended and the beep ton will sound. After the beep, say the voice command. 4 NOTICE For proper recognition, say the com-

mand after the voice instruction and beep tone. Skipping Prompt Messages While prompt message is being stat-

ed Shortly press the key on the steering remote controller (under 0.8 seconds) The prompt message is immediately ended and the beep tone will sound. After the beep, say the voice command.

<For RDS model>

4-87 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 88 Multimedia System ENDING VOICE RECOGNITION Press and hold the While Voice Recognition is operating key on the steering remote controller (over 0.8 seconds) NOTICE While using voice command, pressing a steering wheel remote control or a different key will end voice command. In a state where the system is waiting for a voice command, say cancel or end to end voice command. In a state where the system is waiting for a voice command, press and hold the key on the steering remote controller to end voice command. 4-88 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 89 Illustration on using voice commands

End voice command.

Starting voice command. Shortly pressing the key (under 0.8 seconds):

Please say a command Ding~

Shortly pressing the key (under 0.8 seconds):

Please say a command Ding~

More Help More Help. You can say Radio, FM, AM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Phone book. Please say a command. Phone book Phone book. Please say the name of the phone book you want to call. 4 Ding~

Cancel M u l t i i m e d a S y s t e m

Skipping Voice Recognition Please say a... Shortly pressing the 0.8 seconds):

key (under Di-Ding~(Cancel Sound) Shortly pressing the

(under 0.8 seconds) key Ding~

More Help More Help. You can say Radio, FM, AM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Phone book. Please say a command. 4-89 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 90 Multimedia System Voice Command List

Common Commands: These are commands that can be used in all situations. (However, some commands may not be support-

ed in special circumstances.) Command More Help Help Call<Name>

Phone Call History Phone book Dial Number Redial Radio 4-90 Function Provides guidance on commands that can be used anywhere in the system. Provides guidance on commands that can be used within the current mode. Calls <Name> saved in phone book Ex) Call John Provides guidance on Phone related com-

mands. After saying this command, say Call History, Phone book, Dial Number to exe-

cute corresponding functions. Displays the Call History screen. Displays the phone book screen. After saying this command, say the name of a phone book saved in the phone book to automatically con-

nect the call. Display the Dial number screen. After saying this command, you can say the number what you want to call. Connects the most recently called number.

When listening to the radio, displays the next radio screen. (FM1 FM2 FMA AM AMA)

When listening to a different mode, displays the most recently played radio screen. Command FM FM1(FM One) FM2(FM Two) FMA AM AMA FM Preset 1~6 AM Preset 1~6 FM 87.5~107.9 AM 530~1710 TA on TA off News on News off Function

When currently listening to the FM radio, maintains the current state.

When listening to a different mode, displays the most recently played FM screen. Displays the FM1 screen. Displays the FM2 screen. Displays the FMA screen. Displays the AM screen. Displays the AMA screen. Plays the most recently played broadcast saved in FM Preset 1~6. Plays the broadcast saved in AM Preset 1~6. Plays the FM broadcast of the corresponding frequency. Plays the AM broadcast of the corresponding frequency. Enable Traffic Announcement Disable Traffic Announcement Enable RDS News feature Disable RDS News feature H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 91 Function Moves to the most recently played media screen. If a music CD has been inserted, plays the corresponding track. Plays the music saved in the CD. Moves to the CD track or file selection screen.

For audio CDs, move to the screen and say the track number to play the corresponding track.

Moves to MP3 CD file selection screen. After manually operate the device to select and play music. Command AUX (Auxiliary) Bluetooth Audio Mute Pardon?

Cancel (Exit) Command Media Play Track 1~30 CD Search CD USB Search USB iPod Search iPod Plays USB music. Moves to USB file selection screen. After manually operate the device to select and play music. Plays iPod music. Moves to the iPod file selection screen. After, manually operate the device to select and play music. Plays the music saved in My Music. My Music Search My Music Moves to My Music file selection screen. After manually operate the device to select and play music. Function the music saved Plays the connected external device. Plays Bluetooth Wireless Technology device. Mutes the radio or music volume. Repeats the most recent comment. Ends voice command. in connected 4 M u l t i i m e d a S y s t e m 4-91 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 92 Multimedia System

FM/AM radio commands: Commands that can be used while

Audio CD commands: Commands that can be used while listening to FM, AM radio. listening to Audio CD. Command Preset 1~6 Auto Store Function Plays the broadcast saved in Preset 1~6. Automatically selects radio broadcast fre-

quencies with superior reception and saves in Presets 1~6. Preset Save 1~6 Saves the current broadcast frequency to Preset 1~6. Plays the next receivable broadcast. Plays the previous receivable broadcast. Selects the preset number next to the most recently selected preset. (Example: When cur-

rently listening to preset no. 3, then preset no. 4 will be selected.) Selects the preset number previous to the most recently selected preset. (Example:

When currently listening to preset no. 3, then preset no. 2 will be selected.) Scans receivable frequencies from the current broadcast and plays for 10 seconds each. Moves to the next preset from the current present and plays for 10 seconds each. Enable Alternative Frequency feature Disable Alternative Frequency feature Enable Region feature Seek up Seek down Next Preset Previous Preset Scan Preset Scan AF on AF off Region 4-92 Command Region off Program Type Random Random Off Repeat Repeat Off Next Track Previous Track Scan Track 1~30 Search Track Information Function Disable Region feature Moves to the RDS Program type selection screen. After, manually operate the device to select a desired program type. Randomly plays the tracks within the CD. Cancels random play to play tracks in sequen-

tial order. Repeats the current track. Cancels repeat play to play tracks in sequen-

tial order. Plays the next track. Plays the previous track. Scans the tracks from the next track for 10 seconds each. Plays the desired track number. Moves to the track selection screen. After, say the track name to play the corresponding track. Displays the information screen of the current track. H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 93

MP3 CD / USB commands: Commands that can be used

iPod Commands: Commands that can be used while playing while listening to music files saved in CD and USB. iPod. Command Random All Random Random Off Repeat Folder Repeat Repeat Off Next File Previous File Scan Search File Search Folder Information Copy Function Randomly plays the files within the current folder. Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Repeats all files in the current folder. Cancels repeat play to play files in sequential order. Plays the next file. Plays the previous file. Scans the files from the next files for 10 sec-

onds each. Moves to the file selection screen. Moves to the folder selection screen. Displays the information screen of the current file. Copies the current file into My Music. Command All Random Random Random Off Repeat Repeat Off Next Song Previous Song Search Song Information Function Randomly plays all saved songs. Randomly plays the songs within the current category. Cancels random play to play songs in sequen-

tial order. Repeats the current song. Cancels repeat play to play songs in sequen-

tial order. Plays the next song. Plays the previous song. Moves to the song selection screen. Displays the information screen of the current song. 4-93 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 94 Multimedia System

My Music Commands: Commands that can be used while

Bluetooth Wireless Technology Audio Commands:

playing My Music. Commands that can be used while playing Phone Music. Command Function Play Pause Plays the currently paused song. Pauses the current song. Command Random Random Off Repeat Repeat Off Next File Previous File Scan Search File Information Delete Delete All Function Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Cancels repeat play to play files in sequential order. Plays the next file. Plays the previous file. Scans the files from the next files for 10 sec-

onds each. Moves to the file selection screen. Displays the information screen of the current file. Deletes the current file. You will bypass an additional confirmation process. Deletes all files saved in My Music. You will bypass an additional confirmation process. 4-94 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 95 SETUP

(FOR RDS, BLUETOOTH WIRELESS TECHNOLOGY EQUIPPED MODEL) Starting Mode Press the SETUP Setup screen. key to display the You can select and control options related to

[Phone] and

[System].

[Display],

[Sound], Display Settings Adjusting the Brightness Press

[Display] Select [Brightness]

SETUP the key Select Pop-up Mode Press

[Display] Select [Pop-up Mode]

SETUP the key Select 4 M u l t i i m e d a S y s t e m

, buttons to adjust the Use the screen brightness or set the Brightness on Automatic, Day, or Night mode. Press the button to reset. Default This feature is used to display the Pop-up Mode screen when entering radio and media modes. When this feature is turned on, pressing the key will display the Pop-up Mode screen. MEDIA RADIO or 1) Automatic : Adjusts the brightness automatically 2) Day : Always maintains the bright-

ness on high 3) Night: Always maintains brightness on low the NOTICE The media Pop-up Mode screen can be displayed only when two or more media modes have been connected. 4-95 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 96 Multimedia System Scroll Text Press the

[Display] Select [Scroll text]

SETUP key Select MP3 Information Display Press

[Display] Select [Song Info]

SETUP the key Select Sound Settings Audio Settings Press

[Sound] Select [Audio Setting]

SETUP the key Select This feature is used to scroll text dis-

played on the screen when it is too long to be displayed at once. When turned on, the text is repeat-

edly scrolled. When turned off, the text is scrolled just once. This feature is used to change the information displayed within USB and MP3 CD modes. 1) Folder File : Displays file name and folder name 2) Album Artist Song : Displays album name/artist name/song 4-96 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 97

,

,

, buttons to Use the adjust the Fader/Balance settings. Use the Bass/Middle/Treble settings. Press the button to reset. buttons to adjust the Default

, SDVC (Speed Dependent Volume Control) Press key Select

[Sound] Select [Speed Dependent Vol.]

SETUP the Touch Screen Beep Press SETUP

[Sound] Select Beep]

the key Select

[Touch Screen 4 M u l t i i m e d a S y s t e m The volume level is controlled auto-

matically according to the vehicle speed. SDVC can be set by selecting from On / Off. This feature is used to turn the touch screen beep on/off. 4-97 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 98 Multimedia System Bluetooth Wireless Technology Setting Viewing Paired Phone List Press key Select

[Phone] Select [Paired Phone List]

SETUP the Pairing a New Device Press

[Phone] Select [Pair Phone]

SETUP the key Select Bluetooth Wireless Technology devices can be paired with the audio system. For more information, refer to the Pairing through Phone Setup sec-

tion within Bluetooth Wireless Technology. This feature is used to view mobile phones that have been paired with the audio system. Upon selecting a paired phone, the setup menu is dis-

played. For more information, refer to the Setting Bluetooth Wireless Technology Connection section within Bluetooth Wireless Technology. 4-98 1) 2) 3) 4)

: Moves to the previous screen

: Connect/ disconnects cur-

rently selected phone

: Deletes the currently selected phone

: Sets currently selected phone to highest connection priority NOTICE BEFORE DOWN-

LOADING PHONE BOOKS Only phone books within connected phones can be downloaded. Also check to see that your mobile phone supports the download feature. To learn more about whether your mobile phone supports phone book downloads, refer to your mobile phone users manual. The Phone book for only the con-

nected phone can be downloaded. Before downloading, check to see whether your phone supports the download feature. H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 99 Downloading Phone books Press

[Phone] Select Download]

[Phone SETUP the key Select book Auto Download (Phone Book) Press

[Phone] Select [Auto Download]

SETUP the key Select Audio Streaming Press

[Phone] Select [Audio Streaming]

SETUP key Select the 4 The Phone book is downloaded from the mobile phone and the download progress is displayed. NOTICE Up to 1,000 phone book entries can be copied into car phone book. Up to 1,000 phone book entries can be saved for each paired device. Upon downloading phone book data, previously saved phone book data will be deleted. However, Phone book entries saved to other paired phones are not deleted. This feature is used to automatically download mobile phone book entries once a Bluetooth Wireless Technology phone is connected. When Audio Streaming is turned on, you can play music files saved in your Bluetooth Wireless Technology device from the car. NOTICE The Auto Download feature will download mobile phone book entries every time the phone is con-

nected. The download time may dif-

fer depending on the number of saved phone book entries and the communication state. When downloading a phone book, first check to see that your mobile phone supports the phone book download feature. 4-99 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 100 Multimedia System Outgoing Volume Press

[Phone] Select [Outgoing Volume]

key Select SETUP the turn Bluetooth NOTICE To Technology back on, go to

[Phone] and press Yes. Wireless SETUP the SETUP Turning BluetoothSystem Off Press key Select

[Phone] Select [Bluetooth System Off]

Once Bluetooth Wireless Technology is turned off, Bluetooth Wireless Technology related features will not be supported within the audio system. Use the the outgoing volume level.

, buttons to adjust 4-100 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 101 System Setting Memory Information Press key Select SETUP

[System] Select [Memory Information]

the Language Press the

[System] Select [Language]

SETUP key Select CAUTION

Bluetooth Wireless Technology audio streaming may not be sup-

ported in some Bluetooth Wireless Technology phones. 4 This feature is used to change the system and voice recognition lan-

guage. If the language is changed, the sys-

tem will restart and apply the select-

ed language. This feature displays information related to system memory. 1) Using : Displays capacity currently in use 2) Capacity : Displays total capacity 4-101 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 102 Multimedia System SETUP

(for Bluetooth Wireless Technology equipped model) Starting Mode Press the SETUP Setup screen. key to display the You can select and control options related to [Display], [Sound], [Phone]

and [System]. 4-102 Display Settings Adjusting the Brightness Press

[Display] Select [Brightness]

SETUP the key Select Mode Pop up Press

[Display] Select [Mode Pop up]

SETUP the key Select This feature is used to display the Mode Pop up screen when entering radio and media modes. When this feature is turned on, pressing the key will display the Mode Pop up screen. RADIO MEDIA or NOTICE The media Mode Pop up screen can be displayed only when two or more media modes have been connected.

, Use the buttons to adjust the screen brightness or set the Brightness on Automatic, Daylight, or Night mode. Press the button to reset. Default 1) Automatic : Adjusts the brightness automatically 2 Day : Always maintains the bright-

ness on high 3) Night: Always maintains brightness on low the H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 103 Text Scroll Press the

[Display] Select [Text Scroll]

SETUP key Select MP3 Information Display Press

[Display] Select [Media Display]

SETUP the key Select Sound Settings Sound Settings Press

[Sound] Select [Sound Setting]

SETUP the key Select 4 This feature is used to scroll text dis-

played on the screen when it is too long to be displayed at once. When turned on, the text is repeat-

edly scrolled. When turned off, the text is scrolled just once. This feature is used to change the information displayed within USB and MP3 CD modes. 1) Folder File : Displays file name and folder name 2) Album Artist Song : Displays album name/artist name/song 4-103 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 104 Multimedia System

,

,

, buttons to Use the adjust the Fader/Balance settings. Use the Bass/Middle/Treble settings. Press the button to reset. buttons to adjust the Default

, SDVC (Speed Dependent Volume Control) Press key Select

[Sound] Select [Speed Dependent Vol.]

SETUP the Touch Screen Beep Press SETUP

[Sound] Select Beep]

the key Select

[Touch Screen The volume level is controlled auto-

matically according to the vehicle speed. SDVC can be set by selecting from On/Off. 4-104 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 105 Bluetooth Wireless Technology Setting Viewing Paired Phone List Press key Select

[Phone] Select [Paired Phone List]

SETUP the Pairing a New Device Press

[Phone] Select [Pair Phone]

SETUP the key Select Bluetooth Wireless Technology devices can be paired with the audio system. For more information, refer to the Pairing through Phone Setup sec-

tion within Bluetooth Wireless Technology. This feature is used to view mobile phones that have been paired with the audio system. Upon selecting a paired phone, the setup menu is dis-

played. For more information, refer to the Setting Bluetooth Wireless Technology Connection section within Bluetooth Wireless Technology. 1) screen

: Moves to the previous 2) Connect/Disconnect Phone

:

Connect/ disconnects currently selected phone 3) Delete : Deletes the currently selected phone 4) Change Priority : Sets currently selected phone to highest connec-

tion priority NOTICE BEFORE DOWN-

LOADING CONTACTS Only contacts within connected phones can be downloaded. Also check to see that your mobile phone supports the download feature. To learn more about whether your mobile phone supports contacts downloads, refer to your mobile phone users manual. The contacts for only the connected phone can be downloaded. Before downloading, check to see whether your phone supports the download feature. 4-105 4 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 106 Multimedia System Downloading Contacts Press key Select

[Phone] Select [Contacts Download]

SETUP the Auto Download (Contacts) Press

[Phone] Select [Auto Download]

SETUP the key Select Streaming Audio Press

[Phone] Select [Streaming Audio]

SETUP key Select the The contacts is downloaded from the mobile phone and the download progress is displayed. NOTICE Up to 1,000 contacts entries can be copied into car contacts. Up to 1,000 contacts entries can be saved for each paired device. Upon downloading contacts data, previously saved contacts data will be deleted. However, contacts entries saved to other paired phones are not deleted. 4-106 This feature is used to automatically download mobile contacts entries once a Bluetooth Wireless Technology phone is connected. When Streaming Audio is turned on, you can play music files saved in your Bluetooth Wireless Technology device from the car. NOTICE The Auto Download feature will download mobile contacts entries every time the phone is connected. The download time may differ depending on the number of saved contacts entries and the communi-

cation state. When downloading a contacts, first check to see that your mobile phone supports the contacts download fea-

ture. H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 107 Outgoing Volume Press

[Phone] Select [Outgoing Volume]

key Select SETUP the System Setting Memory Information Press key Select SETUP

[System] Select [Memory Information]

the 4 Use the outgoing volume level.

, buttons to adjust the the SETUP Turning BluetoothSystem Off Press key Select

[Phone] Select [Bluetooth System Off]

Wireless Once Bluetooth Technology is turned off, Bluetooth Wireless Technology related features will not be supported within the audio system. turn Bluetooth NOTICE To Technology back on, go to

[Phone] and press Yes. Wireless SETUP This feature displays information related to system memory. 1) Using : Displays capacity currently in use 2) Capacity : Displays total capacity 4-107 M u l t i i m e d a S y s t e m H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 108 Multimedia System REAR VIEW CAMERA

(if equipped)

The system has been equipped with a rear view camera for user safety by allowing a wider rear range of vision.

The rear view camera will automat-

ically operate when the ignition key is turned ON and the transmission lever is set to R.

The rear view camera will automat-

ically stop operating when set to a different lever. CAUTION The rear view camera has been equipped with an optical lens to provide a wider range of vision and may appear different from the actual distance. For safety, directly check the rear and left/right sides. 4-108 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 109 APPENDIX Name Monday Tuesday Wednesday Thursday Friday Saturday Sunday Use tune knob Volume Max Min AST (Auto store) No Media No File Empty File Info (Information) Artist Title Album Genres Composers Description Name Monday Tuesday Wednesday Thursday Friday Saturday Sunday Use tune knob Volume Volume maxinmum Volume mininmum Automatically selects and saves channels Empty media file in CD or USB Empty media file in CD or USB Empty media file in MY MUSIC Information of playing files Artist name, MP3/CD file currently being played Song name, MP3/CD file currently being played Album name, MP3/CD file cur-

rently being played

"Genres" is keyword for search-

ing mode of playlists for iPod

"Composers" is filtering keyword for searching mode of playlists for iPod Playlists Songs Audiobooks Podcasts RPT (Repeat) FLD.RPT (Folder Repeat) RDM (Random) FLD.RDM(Folder Random) ALL RDM (All Random) COPY Cancel copy File copied Free Copy failed Search Loading CD Reading CD Reading Error Mechanism Error Features of your vehicle Description

"Playlists" is filtering keyword for searching mode of playlists for iPod

"Songs" is filtering keyword for searching mode of playlists for iPod

"Audiobooks" is filtering key-

word for searching mode of playlists for iPod

"Podcasts" is filtering keyword for searching mode of playlists for iPod Audio play mode of Reapeat Audio play mode of Folder Reapeat Audio play mode of Random Audio play mode of Folder Random Audio play mode of All Random Copy MP3 file to flash memory for MY MUSIC Cancel copy mode Completed File copy Free size of memory Copy failed Search files Loading CD Reading CD Reading Error Mechanism Error 4 109 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 110 Features of your vehicle Name Ejecting CD Audio CD Track Reading Media Not supported Empty iPod Communication Error Delete Del.All Del.Sel Return List Select Files Memory is full, Delete files Over 6000 files. can copied not be copied Over 1000 same files can not be copied System will automati cally switchoff after 1 hour with ignition off Battery discharge Start the engine 4 110 Description Ejecting CD Audio CD Audio CD song order Reading Media Not supported file format Empty iPod, iPod don't have playable data Communication error between audio and iPod or usb Delete the paired phone or files in MY MUSIC Delete all files Select files to delete Return menu List files or paired phones Select Files Memory is full, Delete files Over 6000 files. can not be Over 1000 same files can not be copied System will automatically switchoff after 1 hour with igni-

tion off Battery discharge Start the engine Name Setup Display Mode Pop up Scroll text Song Info Folder/File Album/Artist/Song Sound Audio Settings PowerBass Speed Dependent Vol. Volume Dialogue Bass Middle Description Setup Setup display mode This function is used to select popup menu on or off This function is used to display characters longer than the LCD text displays Setup display information being played Display Folder/file name, file currently being played Display Album/Artist/Song name, file currently being played Setup sound mode Setup Audio settings that consist BASS,Middle,Treble,Fader and Balance This function is used to improve bass sound quality Automatically adjust the volume according to the car speed Adjust volume level of Dialogue Bass is sound of low frequency. It can be adjusted sound by user Middle is sound of middle fre-

quency. It can be adjusted sound by user H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 111 Name Treble Fader Balance Default Clock Clock Settings Day Settings Time Format Clock Disp.(Pwr Off) Automatic RDS Time time automatically. System Memory Information VRS Mode Normal Description Treble is sound of high frequency. It can be adjusted sound by user Fader is sound positon between FRONT and REAR. It can be adjusted sound by user Balance is sound positon between Right and Left. It can be adjusted sound by user This function is used to initialize setting value Setup time Enters time advanced settings Enters day advanced settings Refer to the time display The time can be displayedin 12 hours or 24 hours This function is used to select clock display mode in power off This function is used to set the RDS Setup system or system infor mation Display used memory size Setup Voice command mode Normal mode. This function is used to set default value of voice recognition factor Name Expert Language Deutsch English(UK) Franais Italiano Espaol Nederlands Svenska Dansk Polski The system will be rebooted Please change language when ignition ON Bluetooth not ready Please wait Add a new Bluetooth device from your phone Processing Bluetooth Please try later Features of your vehicle Description Expert mode. This function is used to set exercised value of voice recognition factor This function is used to select user language Deutsch English(UK) French Italian Spanish dutch swedish Danish Russian Polish Turkish The system will be rebooted Please change language when ignition ON You can use BT System for a moment Because BT system is being initialized Add a new Bluetooth Wireless Technology device from your phone You can use BT System for a moment Because BT system is being initialized or processing other command 4 111 H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 112 Features of your vehicle Name Incoming Call Call Ended Call Rejected Unknown Call is not possible MIC Mute Activate Bluetooth System?

Bluetooth System activated No phone paired. Pair a phone?

No connected phone. Connect a phone?

Phone book is empty. Download?

Available only when Listening... Phone book Download vehicle is stationary Auto Download 4 112 Description Receivng phone Call Ended When there is unwanted call, You push the button on the steering remote controller

"Unknown" mean Headunit or phone don't have any informa-

tion about phone number Call is not possible Microphone mute Activate Bluetooth Wireless Technology System Bluetooth Wireless Technology system activated Empty phone paired. Pair a phone?

No connected phone. Connect a phone?

Phone book is empty This is a warning, Do not enter the MENU about BT Setup. When vehicle is moving Listen to instruction of audio Downloading phone book from phone paired to audio After pairing phone, audio system automatically download phone book Name Audio Streaming Outgoing Volume Bluetooth System Off Bluetooth System ON Device :

Passkey Pairing complete Pairing failed Already 5 devices paired. Delete a paired phone?

Connection complete Connection failed. Retry?

Priority changed Overwrite previous phone book?

Description After pairing phone, audio system can support Bluetooth Wireless Technology streaming mode Set outoging volume "0 ~ 5"

Turn off Bluetooth Wireless Technology System Turn on Bluetooth Wireless Technology System Bluetooth Wireless Technology device name Passkey for pairing a phone Pair a Bluetooth Wireless Technology phone to the audio Audio & Phone connection have failed All 5 phones have already been paired. Delete a previously paired phone to pair new phone Audio & Phone connection have succeed Audio & Phone connection have failed Changed priority about the registered phones Overwrite previous phone book information H_LF_A,B_AUDIO:BH hma 4-109~(Audio).qxd 5/19/2014 9:44 AM Page 113 Features of your vehicle Name Phone does not support Phone book download No connected Bluetooth device Phone does not support Bluetooth audio Downloading stopped Description Phone does not support Phone book download There are phone in the connec-

tion list But it was actually not connected BT pairing Downloading stopped 4 113 WARNING & SAFETY INFORMATION Safety Symbols Warning

Caution

Note

FCC Information

FCC notification to users

WARNING & SAFETY INFORMATION 7