AC610DFGG CAR AUDIO (BLUETOOTH) Users Manual

 

FM radio reception When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best pos-

sible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the dis-

tance from the radio station, closeness of other strong radio stations or the pres-

ence of buildings, bridges or other large obstructions in the area. JBM001 D300800AHM How vehicle audio works AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. Features of your vehicle AM radio reception JBM002 AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can fol-

low the curvature of the earth rather than travelling straight out into the atmos-

phere. In addition, they curve around obstructions so that they can provide bet-

ter signal coverage. 4 1 Features of your vehicle FM radio station JBM003 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstruc-

tions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble:

JBM004 Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station.

Flutter/Static - Weak FM signals or large obstructions between the trans-

mitter and your radio can disturb the signal causing static or fluttering nois-

es to occur. Reducing the treble level may lessen this effect until the distur-

bance clears. JBM005

Station Swapping - As a FM signal weakens, another more powerful sig-

nal near the same frequency may begin to play. This is because your radio is designed to lock onto the clear-

est signal. If this occurs, select another station with a stronger signal.

Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflect-

ed signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed. 24 Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the audio equipment. In such a case, use the cellu-

lar phone at a place as far as possible from the audio equipment. CAUTION When using a communication sys-

tem such a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone,it may interfere with the vehi-

cle's electrical system and adverse-

ly affect safe operation of the vehi-

cle. WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Care of disc

If the temperature inside the car is too high, open the car windows for ventilation before using your car audio.

It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means.

Do not apply volatile agents such as benzene and thinner, normal cleaners and magnetic sprays made for ana-

logue disc onto CDs.

To prevent the disc surface from get-

ting damaged. Hold and carry CDs by the edges or the edges of the center hole only.

Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).

Do not damage the disc surface or attach pieces of sticky tape or paper onto it.

Make sure on undesirable matter other than CDs are inserted into the CD player (Do not insert more than one CD at a time). Features of your vehicle

Keep CDs in their cases after use to protect them from scratches or dirt.

Depending on the type of CD-R/CD-

RW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your car audio system. NOTICE - Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with the international audio CD standards (Red Book), may not play on your car audio. Please note that if you try to play copy protected CDs and the CD player does not perform correctly the CDs maybe defective, not the CD player. 4 3 Features of your vehicle CD Player : AC100DFE/AC110DFE CD Changer : AC600DFE/AC610DFE There will be no logo if the Bluetooth feature is not supported. VF_AC100DFE_EU / VF_AC600DFE_EU 44 SEEK 4.

When the Button SEEK TRACK is pressed, it will automatically tune to the next lower station. SEEK TRACK

When the is pressed, it will automatically tune to the next higher station. 5. Knob

Turns the audio system on/off when Button &

the ignition switch is on ACC or ON.

If the knob is turned clockwise/counter-

clockwise, the volume will increase

/decrease.

Depending on the model if the ignition switch is not on ACC or ON position. the Battery Discharge warning appears on LCD after 10 seconds of power-up, and automatically turns off after 1 hours of operation. VF_EU_RADIO 6. PRESET Buttons

Press 6 1 buttons less than 0.8 seconds to play the station saved in each button.

Features of your vehicle

Press 1 6

buttons more than 0.8 seconds or longer to save the current station to the respective button with a beep. VF_EU_RADIO 1 6

AST Button (AUTO STORE) 7. When the button is pressed, it automati-

cally selects and saves channels with high reception rate to PRESET buttons and plays the channel saved in PRESET1. If no channel is saved after AST, it will play the previous channel.

Saves only to the Preset memory

(1)~(6) of FMA or AMA mode in some models. DARK Button 8. Turn the LCD Display & Backlight ON/OFF when button press. DARK 4 5 Using RADIO, SETUP, VOLUME and AUDIO CONTROL VF_EU_RADIO FM Button 1. Turns to FM mode and toggles FM1 and FM2 when the button is pressed each time. AM Button AM 2. Pressing the button selects the AM band. AM Mode is displayed on the LCD. TA Button 3. TA(Traffic announcement) Channels in FM, CD, AUX mode, turns on/off the reception of TA channels of RDS. Features of your vehicle

SCROLL Select whether long file names are scrolled continuously (On) or just once (Off). VF_EU_RADIO 9. PTY

Moves Button PTY FOLDER button when search-

ing PTY in RDS Broadcasting Program Type selection.

SDVC (Speed Dependent Volume Control) Select this item to turn the SDVC feature On or Off. If it is turned ON, volume level is adjusted automatically according to the vehicle speed. PTY

Moves FOLDER button when search-

ing PTY in RDS Broadcasting Program Type selection. SETUP SETUP Button 10. Press the button to convert to Setup Mode. In the Setup Mode screen, select the mode you want to set by pressing the knob to enter detailed setup mode. The Setup Mode screens are each different according to the Bluetooth, External Amp option selections. knob. Press 64

MEDIA Select default display of MP3 play infor-

mation. Folder/File or Artist/Title can be selected.

RDS(if available) RDS menu includes News/AF/Region/

TA Vol. menu sequentially.

NEWS(NEWS MENU indication is pos sible with RDS MENU) Turns the automatic NEWS reception fea-

ture ON or OFF.

AF(AF MENU indication is possible with RDS MENU) Select this item to turn the AF(Alternate Frequency) feature ON or OFF.

TA VOL.(TA VOL. MENU indication is possible with RDS MENU) Adjusts the TA (Traffic Announcement) vol-

ume level according to normal audio vol-

ume level.

CLOCK Select this item to enter Clock setup mode.(12/24Hr., Auto, Time)

12/24 Hr. Select 12/24 Hr. button to enter Time Format menu.

REGION(REGION MENU indication is possible with RDS MENU) Selects whether REGION code is used

(ON) or not (OFF) once the radio deter-

mines the AF jump condition. If AUTO is selected, AF jump condition is determined automatically via PI reception status.

Auto Select Auto button to enter Automatic RDS Time menu. Features of your vehicle

Time Select Time button to enter Time setting. Adjust the hour and press the knob to set. Adjust the minute and press the knob to complete and exit from clock adjustment mode. Pressing the button more than 0.8 seconds SETUP while in power off, screen will allow the user to make immediately adjustments to the clock.

PHONE (if equipped) Select this item to enter PHONE setup mode. Refer to BLUETOOTH PHONE OPERATION section for detailed infor-

mation. PHONE menu is not available if the audio does not support Bluetooth features. 4 7 Features of your vehicle VF_EU_RADIO

Knob 11. Within the screen displayed after first pressing the knob, turn the knob to select the mode. The modes will change in order of BASS . MIDDLE TREBLE FADER BAL-

ANCE. BASS and turn the

BASS Control Press knob to adjust the bass setting. In this state, turn the knob clockwise to increase the bass and counter-clockwise to decrease the bass. (Based on bass frequency band, the range of adjustment is max +10/min-10.) BASS -1 BASS 0 BASS +1 84 MIDDLE and turn the

MIDDLE Control Press knob to adjust the middle setting. In this state, turn the knob clockwise to increase the middle and counter-clock-

wise to decrease the middle. (Based on middle frequency band, the range of adjustment is max +10/min-10.) MIDDLE -1 MIDDLE 0 MIDDLE +1 BALANCE and turn the

BALANCE Control Press knob to adjust the left/right volume set-

ting. In this state, turn the knob clockwise to decrease the left speaker volume and counter-clockwise to decrease the right speaker volume.

(The left/right can each be adjusted to L=10/R=10.) TRBLE and turn the

TREBLE Control Press knob to adjust the treble setting. In this state, turn the knob clockwise to increase the treble and counter-clock-

wise to decrease the treble. (Based on treble frequency band, the range of adjustment is max +10/min-10.) TREBLE -1 TREBLE TREBLE FADER and turn the

FADER Control Press knob clockwise and counter-clockwise to adjust the front/rear volume levels. In this state, turn the knob clockwise to increase the front speaker volume and counter-clockwise to increase the rear speaker volume. (The front/rear can each be adjusted to F=10/R=10.) FADER F=1 FADER F=R FADER R=1 Features of your vehicle 2 Button (REPEAT) 4. Press this button for less than 0.8 sec-

onds to activate RPT mode and more than 0.8 seconds to activate FLD.RPT mode.

RPT : Only a track (file) is repeatedly played back.

FLD.RPT (MP3/WMA Only) : Only files in a folder are repeatedly played back. 5 Button (SCAN) 5. Play each song in the CD for 10 seconds. To cancel SCAN Play, press this button again. 6. DISC Button (CD changer :

AC600DFE/AC610DFE)

Preset change button changes disc to the previous disc.

Preset change button changes 3 4 disc to the next disc.

Press SEEK TRACK button for less than 0.8 seconds to play the next song.

Press SEEK TRACK button for 0.8 seconds or longer to initiate forward direction high speed sound search of current song Using CD Player VF_EU_CD CD/AUX Button (CD) 1. If the CD is loaded, turns to CD mode. If no CD, it displays No Media for 3 sec-

onds and returns to the previous mode. VF_AC100DFE_CDP Button VF_AC600DFE_CDC TRACK 2.

Press SEEK TRACK button for less than 0.8 seconds to play from the beginning of current song. SEEK TRACK button for less than 0.8 seconds and press again within 1 second to play the previous song.

Press

Press SEEK TRACK button for 0.8 seconds or longer to initiate reverse direction high speed sound search of current song. 1 Button (RANDOM) 3. Press this button for less than 0.8 sec-

onds to activate RDM mode and more than 0.8 seconds to activate ALL RDM mode.

RDM : Only files/tracks in a folder/disc random in a are played back sequence.

ALL RDM (MP3/WMA Only) : All files in a disc are played back in the random sequence. 4 9 Features of your vehicle Press folder displayed. knob to move to the

Knob 9.

Turn this knob clockwise to browse songs after current song, or counter-

clockwise to browse songs before cur-

rent song. To play the displayed song, press the knob.

Pressing this knob without turning enters to AUDIO CONTROL mode. VF_AC100DFE_CDP VF_AC600DFE_CDC 10. CD Eject Button Push button for less than 0.8 seconds to eject the CD during CD play-

back. This button is enabled when igni-

tion switch is off.

ALL EJECT (CD Changer : AC600DFE/

AC610DFE) Press this button for more than 0.8 sec-

onds to eject all discs inside the deck in respective order. VF_EU_CD INFO Button 7. Displays the information of the current song.

Audio CD : Disc Title/Artist, Track Title

/Artist, Total Track.

MP3 CD : File Name, Title, Artist, Album, Folder, Total Files (Not dis-

played if the information is unavailable on the CD or file.) FOLDER 8.

Press Button PTY FOLDER button to move to child folder of the current folder and display the first song in the folder. Press knob to move to the folder displayed. It will play the first song in the folder. PTY

Press FOLDER button to move to par-

ent folder of the current folder and dis-

play the first song in the folder. 4 10 11. CD Slot Insert a CD label side up and gently push in while ignition switch is on ACC or ON. The audio automatically switches to CD mode and begins to play the CD. If the audio was turned off, audio power will automatically turned on as the CD is inserted.

This audio only recognizes 12cm-size, CD-

DA (Audio CD) or ISO data-CD (MP3 CD).

If UDF data-CD or non-CD (e.g. DVD) is inserted, "Reading Error" message will be displayed and the disc will be ejected. 12. CD Indicator (CD Player : AC100 DFE /AC110DFE) When car ignition switch is ACC or ON and if the CD is loaded, this indicator is lighted. If the CD is ejected the light is turned off. CAUTION Do not insert a CD if CD indicator is lit. NOTE:

Order of playing files (folders) :

1. Song playing order :

to sequen-

tially. 13. VF_AC600DFE_CDC Button (CD Changer :

LOAD AC600DFE/AC610DFC)) LOAD button to load CDs to avail-

Push able CDC deck (from 1~6). Push LOAD button for more than 2 seconds to load into all available decks. The last CD will play. 10 seconds idle status will disable loading process. Features of your vehicle 2. Folder playing order :

If no song file is contained in the folder, that folder is not displayed. 4 11 Features of your vehicle CAUTION IN USING USB DEVICE To use an external USB device, make sure the device is not con-

nected when starting up the vehi-

cle. Connect the device after starting up.

If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.)

If the engine is started up or turned off while the external USB device is connected,the external USB device may not work.

It may not play inauthentic MP3 or WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps~320Kbps. 2) It can only play WMA music files with the compression rate between 8Kbps~320Kbps.

Take precautions for static electrici-

ty when connecting or disconnect-

ing the external USB device.

(Continued) 4 12

(Continued)

An encrypted MP3 PLAYER is not recognizable.

Depending on the condition of the external USB device,the con-

nected external USB device can be unrecognizable.

When the formatted byte/sector setting of External USB device is not either 512BYTE or 2048BYTE, then the device will not be recog-

nized.

Use only a USB device formatted to FAT 12/16/32.

USB devices without USB I/F authentication may not be recog-

nizable.

Make sure the USB connection terminal does not come in contact with the human body or other objects.

If you repeatedly connect or dis-

connect the USB device in a short period of time, it may break the device.

You may hear a strange noise when connecting or disconnect-

ing a USB device.

(Continued)

(Continued)

If you disconnect the external USB device during playback in USB mode,the external USB device can be damaged or may malfunction. Therefore,disconnect the external USB device when the audio is turned off or in another mode.(e.g, Radio or CD)

Depending on the type and capacity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device.

Do not use the USB device for pur-

poses other than playing music files.

Playing videos through the USB is not supported.

Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble.

If you use devices such as a USB hub purchased separately, the vehicles audio system may not recognize the USB device.In that case, connect the USB device directly to the multimedia termi-

nal of the vehicle.

(Continued) Features of your vehicle

(Continued)

Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products as shown below.

(Continued)

If the USB device is divided by logical drives,only the music files on the highest-priority drive are recognized by car audio.

Devices such as MP3 Player/

Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable.

Charging through the USB may not be supported in some mobile devices. A car exclusive cable (Provided or sold separately) is required to use the iPod.

Some non-standard USB devices

(METAL COVER TYPE USB) can be unrecognizable.

Some USB flash memory readers

(such as CF,SD,microSD,etc.) or external-HDD type devices can be unrecognizable.

Music files protected by DRM

(DIGITAL RIGHTS MANAGEMENT) are not recognizable.

The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device.

(Continued) 4 13 Features of your vehicle Press the button for 0.8 seconds or longer to play the song in reverse direction in fast speed.

Press the SEEK TRACK button for less than 0.8 seconds to move to the next song. Press the button for 0.8 seconds or longer to play the song in forward direction in fast speed. VF_EU_USB 1 Button (RANDOM) 3.

Press this button for less than 0.8 sec-

onds to play songs randomly in current folder.

Press this button for 0.8 seconds or longer to play songs randomly in entire USB device.

To cancel RANDOM play, press this button again. 2 4.

Press this button for less than 0.8 sec-

Button (REPEAT) onds to repeat current song. Using USB device VF_EU_USB CD/AUX 1. Button (USB or AUX) If the auxiliary device is connected, it switches to USB or AUX mode to play the sound from the auxiliary player. If there is no auxiliary device, then the message No Media will become dis-

played on the LCD for 3 seconds and returns to previous mode. TRACK 2.

Press the Button SEEK TRACK button for less than 0.8 seconds to play from the beginning of the current song. Press the button for less than 0.8 sec onds and press it again within 1 sec-

ond to move to and play the previous song. 4 14

Press this button for 0.8 seconds or longer to repeat all songs in current folder.

To cancel REPEAT, press this button again. 5 Button (SCAN) 5. Plays each song in the USB device for 10 seconds. To cancel SCAN play, press this button again. VF_EU_USB INFO Button 6. Displays the information of the file cur-

rently played in the order of FILE NAME, TITLE, ARTIST, ALBUM, FOLDER, TOTAL FILE, NORMAL DISPLAY

(Displays no information if the file has no song information.) Features of your vehicle

Pressing this knob without turning enters to AUDIO CONTROL mode. VF_EU_USB FOLDER 7.

Press Button PTY FOLDER button to move to child folder of the current folder and display the first song in the folder. Press knob to move to the folder displayed. It will play the first song in the folder. PTY

Press FOLDER button to move to par-

ent folder display the first song in the folder. Press knob to move to the folder displayed.

Knob 8.

Turn this knob clockwise to browse songs after current song, or counter clockwise to browse songs before cur-

rent song. To play the displayed song, press the knob. 4 15 Features of your vehicle NOTICE FOR USING THE iPod DEVICE Some iPod models might not sup-

port the communication protocol and the files will not be played. Supported iPod models:

- iPod Mini

- iPod 4th(Photo) ~ 6th(Classic) generation

- iPod Nano 1st~4th generation

- iPod Touch 1st~2nd generation The order of search or playback of songs in the iPod can be different from the order searched in the audio system. If the iPod disabled due to its own malfunction, reset the iPod. (Reset:

Refer to iPod manual) An iPod may not operate normally on low battery. Some iPod devices, such as the iPhone, can be connected through the Bluetooth interface. The device must have audio Bluetooth capabili-

ty (such as for stereo headphone Bluetooth). The device can play, but it will not be controlled by the audio system. 4 16 CAUTION IN USING THE iPod DEVICE

The HyundaiiPod Power Cable is needed in order to operate iPod with the audio buttons on the audio system.The USB cable pro-

vided by Apple may cause mal-

function and should not be used for Hyundaivehicles. The Hyundai iPod Power Cable may be purchased through your HyundaiDealership.

When connecting iPod with the iPod Power Cable,insert the con-

nector to the multimedia socket completely. If not inserted com-

pletely, communications between iPod and audio may be interrupted.

When adjusting the sound effects of the iPod and the audio system,the sound effects of both devices will overlap and might reduce or distort the quality of the sound.

Deactivate (turn off) the equalizer function of an iPod when adjust-

ing the audio systems volume, and turn off the equalizer of the audio system when using the equalizer of an iPod.

(Continued)

(Continued)

When the iPod cable is connected, the system can be switched to AUX mode even without iPod device and may cause noise.Disconnect the iPod cable when you are not using the iPod device.

When not using iPod with car audio,detach the iPod cable from iPod.Otherwise,iPod may remain in accessory mode, and may not work properly. Detachable USB/AUX All-in-one USB/AUX

When connecting the iPod,use the USB/AUX terminals.

When disconnecting the iPod, disconnect both the USB/AUX ter-

minal.

The iPod exclusive cable must be connected to both the USB/AUX terminals for iPod charging and operations to be supported. SEEK TRACK

Press button for 0.8 seconds or longer to initiate reverse direction high speed sound search of current song.

Press SEEK TRACK button for less than 0.8 seconds to play the next song. SEEK TRACK

Press button for 0.8 sec-

onds or longer to initiate forward direc-

tion high speed sound search of cur-

rent song. Features of your vehicle 6 Button (MENU) 5. Moves to the upper category from cur-

rently played category of the iPod. To move to (play) the category (song) displayed, press You will be able to search through the lower category of the selected category. The standard order of iPods category is SONGS, ALBUMS, ARTISTS, GENRES, iPod. knob. VF_EU_iPod 1 Button (RANDOM) 3.

Press this button for less than 0.8 sec-

onds to shuffle order of all songs in current category. (Song Random)

Press this button for 0.8 seconds or longer to shuffle order of albums in cur-

rent category. (Album Random)

To cancel RANDOM Play, press this button again. 2 4. Repeats the song currently played. Button (REPEAT) VF_EU_iPod INFO Button 6. Displays the information of the file cur-

rently played in the order of TITLE, ARTIST, ALBUM, NORMAL DISPLAY

(Displays no information if the file has no song information.) 4 17 Using iPod iPod is a trademark of Apple Inc. VF_EU_iPod CD/AUX Button (iPod) 1. If iPod is connected, it switches to the iPod mode from the previous mode to play the song files stored in the iPod. If there is no iPod connected, then it dis-

plays the message "No Media" for 3 sec-

onds and returns to the previous mode. TRACK 2.

Press Button SEEK TRACK button for less than 0.8 seconds to play from the beginning of current song. SEEK TRACK button for less than 0.8 seconds and press again within 1 second to play the previous song.

Press Features of your vehicle VF_EU_iPod

Knob 7. When you rotate the knob clockwise, it will display the songs (category) ahead of the song currently played (category in the same level). Also, when you rotate the knob counter-

clockwise, it will display the songs (cate-

gory) before the song currently played

(category in the same level). To listen to the song displayed in the song category, press the button to skip to and play the selected song. Pressing the button changes the BASS, MIDDLE, TREBLE, FADER and BAL-

ANCE TUNE mode. The mode selected is shown on the display. After selecting each mode, rotate the Audio control knob clockwise or counterclockwise. 4 18

(continued)

Do not place the phone near or inside metallic objects,otherwise communications with Bluetooth system or cellular service sta-

tions can be disturbed.

While a phone is connected through Bluetooth your phone may discharge quicker than usual for additional Bluetooth-related operations.

Some cellular phones or other devices may cause interference noise or malfunction to audio system. In this case, store the device in a different location may resolve the situation.

Please save your phone name in English,or your phone name may not be displayed correctly. CAUTION IN USING BLUETOOTH CELLULAR PHONE

Do not use a cellular phone or perform Bluetooth settings (e.g. pairing a phone) while driving.

Some Bluetooth-enabled phones may not be recognized by the system or fully compatible with the system.

Before using Bluetooth related features of the audio system, refer your phones Users Manual for phone-side Bluetooth opera-

tions.

The phone must be paired to the audio system to use Bluetooth related features.

You will not be able to use the hands-free feature when your phone (in the car) is outside of the cellular service area (e.g.in a tunnel, in a underground, in a mountainous area,etc.).

If the cellular phone signal is poor or the vehicles interior noise is too loud,it may be difficult to hear the other persons voice during a call.

(Continued) Features of your vehicle 4 19 NOTICE The phone must be paired to the sys-

tem before using Bluetooth features. Only one selected (linked) cellular phone can be used with the system at a time. Some phones are not fully compatible with this system. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hyundai is under license. A Bluetooth enabled cell phone is required to use Bluetooth wireless technology. Features of your vehicle BLUETOOTH PHONE OPERATION

(if equipped) General Features

This audio system supports Bluetooth hands-free and stereo-headset features.

- HANDS-FREE feature: Making or receiving calls wirelessly through voice recognition.

- STEREO-HEADSET feature: Playing music from cellular phones (that sup-

ports A2DP feature) wirelessly.

Voice recognition engine of the Bluetooth system supports 10 types of languages:

FRENCH GERMAN UK ENGLISH SPANISH DUTCH ITALIAN DANISH RUSSIAN POLISH SWEDISH 1. 2. 3. 4. VOLUME speaker volume. button : Raises or lowers button : Activates voice recognition. button : Places or transfers a call. button : Rejects or ends a call. What is Bluetooth?

Bluetooth is a wireless technology that allows multiple devices to be connected in a short range, low-powered devices like hands-free, stereo headset, steering remote control, etc. For more informa-

tion, visit the Bluetooth website at www.Bluetooth.com 4 20 Bluetooth Language Setting The system language can be changed by the following steps:

1. Power on the audio system with the volume set to an audible level. 2. Press and hold button on the steering wheel until the audio displays Please Wait.

- The Bluetooth system will reply in currently selected language that it is changing to the next language.

- System language cycles between FRENCH/GERMAN/UK ENGLISH SPANISH/DUTCH/ITALIAN/DANISH/

RUSSIAN/POLISH/SWEDISH. 3. When completed, the audio display returns to normal. 4. Repeat steps 2 and 3 for the next lan-

guage selection. NOTE:

The phone needs to be paired again after changing system language.

- Avoid resting your thumb or finger button as the language on the could unintentionally change. Voice Recognition Activation

The voice recognition engine contained in the Bluetooth System can be acti-

vated in the following conditions:

- Button Activation The voice recognition system will be active when the button is pressed and after the sound of a Beep.

- Active Listening The voice recognition system will be active for a period of time when the Voice Recognition system has asked for a customer response.

The system can recognize single digits from zero to nine while number greater than ten will not be recognized.

If the command is not recognized, the system will announce "Pardon" or No input voice signal from microphone. (No response)

The system shall cancel voice recogni-

tion mode in following cases : When pressing the button and saying cancel following the beep. When not making a call and pressing the button. When voice recognition has failed 3 consecutive times. Features of your vehicle

At any time if you say help, the system will announce what commands are available. Menu tree The menu tree identifies available voice recognition Bluetooth functions. Setup Pair phone Select phone Delete phone Change priority Bluetooth off Phonebook Add entry By voice By Phone Change Delete name Call By name By number 4 21 Features of your vehicle Voice Operation Tip To get the best performance out of the Voice Recognition System, observe the followings:

- Keep the interior of the vehicle as quiet as possible. Close the window to elim-

inate surrounding noise (traffic noise, vibration sounds, etc), which may dis-

turb recognizing the voice command correctly.

- Speak a command after a beep sound within 5 seconds. Otherwise the com-

mand will not be received properly.

- Speak in a natural voice without paus-

ing between words. Phone Setup All Bluetooth-related operations can be performed by voice command or by man-

ual operation.

- By Voice Command:

1. Press button. 2. Say Set up.

- The system replies with available commands. 1) Pair phone 2) Select phone 3) Delete phone 4) Change priority 4 22 5) Bluetooth off

- To skip the information message, Press again and then a beep is heard.

- By Manual Operation:

1. Push the SETUP SETUP mode. button to enter

Pairing phone Before using Bluetooth features, the phone must be paired (registered) to the audio system. Up to 5 phones can be paired with the system. NOTE:

The pairing procedure of the phone varies according to each phone model. Before attempting to pair phone, please see your phones Users Guide for instructions. 2. Rotate the cursor between knob to move the items push the knob to select Phone. NOTE:

Once pairing with the phone is com-

pleted, there is no need to pair with that phone again unless the phone is deleted manually from the audio sys-

tem (refer Deleting Phone section) or is removed from the phone. the vehicles information 3. Rotate the knob to move the cursor between items and push the knob to select a desired item.

- By Voice Command:

1. Press button. 2. Say Set Up.

- The system replies with available commands.

- To skip the information message, again and then a beep is press heard. 3. Say Pair Phone 4. Proceed at next step. 5. Say the name of your phone when prompted.

- Use any name to uniquely describe your phone.

- Use Full name to voice tag.

- Not use to short name or similar to voice command. 6. Bluetooth system will repeat the name you stated. 7. Say Yes to confirm. 8. The audio displays searching ----

passkey: 0000 and asks you to initiate pairing procedure from the phone. 9. Search the Bluetooth system on your phone .Your phone should display your

[vehicle model name] on the Bluetooth device list. Then attempt pairing on your phone 10. After Pairing is completed, your phone will start to transfer phone/con-

tact list to the audio system.

- This process may take from a few minutes to over 10 minutes depend-

ing on the phone model and number of entries in the phone/contact list.

- By Manual Operation:

1. Select Pair in PHONE menu, then proceed from step5. NOTE:

Until the audio displays Transfer Complete, Bluetooth hands-free feature may not be fully operational.

Depending on the phone make and model, the phone book contact list mat not transfer to the audio system. NOTE:

If the phone is paired to two or more vehicles of the same model, i.e. both vehicles are HYUNDAI i40, some phones may not handle Bluetooth devices of that name correctly. In this case, you may need to change the Features of your vehicle name displayed on your phone from i40 to i401 and i402. Refer to your phones Users Guide, or contact your cellular carrier or phone manufacturer for instructions.

Connecting phone When the Bluetooth system is enabled, the phone previously used is automati-

cally selected and re-connected. If you want to select different phone previously paired, the phone can be selected through Select Phone menu. Only a selected phone can be used with the hands-free system at a time.

- By Voice Command:

1. Press button. 2. Say Set Up. 3. Say Select Phone after prompt

- The system lists all the registered phone names. 4. Say the name or number of desired phone from the list. 5. Say Yes to confirm. 4 23

- By Voice Command:

1.Press 2.Say Set Up. 3.Say Delete Phone after prompt. button.

- The system lists all the registered phone names. 4.Say the name or number of desired phone from the list. 5.Say Yes to confirm.

- By Manual Operation:

1. Select Delete in PHONE menu, then select desired phone from the list. Features of your vehicle

- By Manual Operation:

1. Select Select in PHONE menu, then select desired phone from the list. 4. Say the name or number of desired phone from the list. 5. Say Yes to confirm.

- By Manual Operation:

1. Select Priority in PHONE menu, then select desired phone from the list.

Changing Priority When several phones are paired to the audio system, the system attempts to connect the Bluetooth is enabled:

1. Priority checked phone. 2. Previously connected phone 3. Gives up auto connection. following order when

- By Voice Command:

1. Press 2. Say Set Up. 3. Say Change Priority after prompt. button.

- The system lists all the registered phone names. 4 24

Deleting Phone The paired phone can be deleted.

- When the phone is deleted, all the infor-

mation associated with that phone is also deleted (including phonebook).

- If you want to use the deleted phone with the audio system again, pairing procedure must be completed once more.

Changing Language

- By Voice Command:

1. Select Language in PHONE menu, adjust language to desired language by turning knob, then press the knob to cinfirm.

- Supported Languages:

FRENCH/GERMAN/UK ENGLISH SPANISH/DUTCH/ITALIAN/DANISH/RU SSIAN/POLISH/SWEDISH.

Turning Bluetooth ON/OFF Bluetooth system can be enabled (ON) or disabled (OFF) by this menu.

- If Bluetooth is disabled, all the com-

mands related to Bluetooth system prompts whether you wish to turn Bluetooth ON or not.

- By Voice Command:

1. Press button. 2. Say Set Up 3. Say Bluetooth Off after prompt. 4. Say Yes to confirm.

- By Manual Operation:

1. Select BT Off in PHONE menu, then after announcement, say YES to con-

firm. NOTE:

The Phone need to be paired again after changing system language.

Avoid resting your thumb or finger on the talk button as the language could unintentionally change. Features of your vehicle Phone Book (In-Vehicle)

Adding Entry Phone numbers and voice tags can be registered. Entries registered in the phone can also be transferred.

Adding Entry by Voice 1. Press button. 2. Say "Phonebook".

- The system replies with all available commands.

- To skip the information message, again and then a beep is press heard. 3. Say Add Entry. 4. Say By Voice to proceed. 5. Say the name of the entry when prompted. 6. Say Yes to confirm. 7. Say the phone number of that entry when prompted. 8. Say Store if phone number input is finished. 9. Say a phone number type. Home, Work, Mobile, Other or Default is available. 10. Say Yes to complete adding entry. 11. Say Yes to store additional location for this contact, or say Cancel to fin-

ish the process. 4 25 Features of your vehicle NOTICE

- The system can recognize single digits from zero to nine. Numbers that are ten or greater cannot be recognized.

- You can enter each digit individually or group digits together in preferred string lengths.

- To speed up input, it is a good idea to group all digits into a continuous string.

- Recommend to enter the numbers con-

stituted an grouping within all digit numbers to dial 995 / 734 / 0000.

- The display corresponding to each operation appears on the screen as fol-

lows:

Input operation example:

1. Say: Nine, nine, five Display: 995 2. And say: Seven, three, four Display: 995734 4 26

Adding Entry by Phone 1. Press button. 2. Say Phonebook. 3. Say Add Entry after prompt. 4. Say By Phone to proceed. 5. Say Yes to confirm. 6. Your phone will start to transfer phone/contact list to the audio system. This process may take over 10 minutes depending on the phone model and number of entries 7. Wait till the audio displays Transfer Complete message.

Changing Name The registered names can be modified. 1.Press button. 2.Say Phonebook. 3.Say Change Name after prompt. 4.Say the name of the entry (voice tag). 5.Say Yes to confirm. 6.Say new desired name.

Deleting Name The registered names can be deleted. 1.Press button. 2.Say Phonebook. 3.Say Delete Name after prompt. 4.Say the name of the entry (voice tag). 5.Say Yes to confirm. Making a Phone Call

Calling by Name A phone call can be made by speaking names registered in the audio system. button. 1. Press 2. Say Call. 3. Say Name when prompted. 4. Say desired name (voice tag). 5. Say desired location (phone number type). Only stored locations can be selected. 6. Say Yes to confirm and make a call. Tip A shortcut to each of the following func-

tions is available:

1. Say Call Name 2. Say Call <john>

3. Say Call <john> at <home>

Dialing by Number A phone call can be made by dialing the spoken numbers. The system can recog-

nize single digits from zero to nine. button. 1.Press 2.Say Call. 3.Say Number when prompted. 4.Say desired phone numbers. 5.Say Dial to complete the number and make a call. Tip A shortcut to each of the following func-

tions is available:

1. Say Dial Number 2. Say Dial <digit>

Features of your vehicle Receiving a Phone Call When receiving a phone call, a ringtone is audible from speakers and the audio system changes into telephone mode. When receiving a phone call, Incoming call message and incoming phone num-

ber (if available) are displayed on the audio. Talking on the Phone When talking on the phone, Active Call message and the other partys phone number (if available) are displayed on the audio.

To Finish a Call

- Press button on the steering wheel. button on the steering wheel.

To Answer a Call:

- Press

To Reject a Call:

- Press

To Adjust Ring Volume:

- Use VOLUME buttons on the steering button on the steering wheel. wheel.

To Transfer a Call to the Phone (Secret Call):

- Press button on the steering wheel until the audio system transfers a call to the phone. NOTICE In the following situations, you or the other party may have difficulty hearing each other:

1. Speaking at the same time, your voice may not reach each other parties. (This is not a malfunction.) Speak alternate-

ly with the other party on the phone. 2. Keep the Bluetooth volume to a low level. High-level volume may result in distortion and echo. 3. When driving on a rough road. 4. When driving at high speeds. 5. When the window is open. 6. When the air conditioning vents are facing the microphone. 7. When the sound of the air condition-

ing fan is loud. 4 27 NOTE:

In addition to streaming MP3 files, all music and sound files your cellu-

lar phone supports can be played by the audio system.

Bluetooth cellular phones must include A2DP and AVRCP capabilities. compatible

Some A2DP and AVRCP compatible Bluetooth cellular phones may not play music through the audio sys-

tem initially. These cellular phones may need to have the Bluetooth streaming enabled, for example;

i.e : MenuFilemanagerMusic OptionPlay via Bluetooth

Please refer to Users Guide for your cellular phone for more information. To cancel Bluetooth cellular phone music streaming, stop music play-

back on the cellular phone or change the audio mode to AM/FM, CD, iPod, ect. Features of your vehicle Bluetooth Audio Music Streaming The audio system supports Bluetooth A2DP (Audio Advanced Distribution Profile) and AVRCP

(Audio Video Remote Control Profile) technologies. Both profiles provide steaming of music via compatible PAIRED Bluetooth Cellular phone. To stream music from the Bluetooth cel-

lular phone, play your music files on your cellular phone according to your cellular phone users manual and press the button on the audio system until CD/AUX MP3 play is displayed on the LCD. The audio system head unit displays MP3 MODE. 4 28 Features of your vehicle Key matrix No. KEY Paired H/P Empty Disconnected Connected Normal mode BT SETUP menu Incoming Call Outgoing Call Active Call 2nd Call Class 1 2 3 SHORT Not Paired Not Connecting LONG

Accept Call

2nd call 2nd Call 1st Call:waiting 2nd Call:active 2nd Call:waiting 1st Call:active Transfer call:secret call SHORT VR VR VR VR MODE Cancel MODE Cancel MODE Cancel MODE Cancel Reject Call End Call End Call End Call LONG

[10sec]

Speaker Adaptation Speaker Adaptation

(Only English)

(Only English) SHORT Active Active Active Active LONG

[10sec]

4 29 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.