| submitted | available | document details (if available) | source link |
|---|---|---|---|
| August 11 2016 | August 11 2016 |
| various | User Manual | Users Manual | 1.65 MiB | August 11 2016 |
CAR MULTIMEDIA SYSTEM USER'S MANUAL Thank you for purchasing this multimedia system. Precaution for safe usage This user's manual explains how to use the Kia Motor multimedia system. Before using the product, read the con-
tents of this user's manual carefully and use this product safely. The screens shown in this manual may differ with the actual screens of the product. The design and specification of this product may change without prior notifi-
cation for product improvement. When transferring the vehicle to another individual, include this user's manual so that the next driver can continue its use. Driving while distracted can result in a loss of vehicle control, that may lead to an accident, severe personal injury, and death. The drivers primary responsibil-
ity is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the drivers eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle. Do not operate the multimedia system while driving. Do not disassemble, assemble, or modify the multimedia system. Do not watch the screen for prolonged periods of time while driving. Set the volume to a level which allows the driver to be aware of external conditions. Do not operate the multimedia system for prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge. Be cautious not to spill water or introduce foreign objects into the device. Do not cause severe shock to the device. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch panel. In case of product malfunction, please contact your place of purchase or service center. When cleaning the touch screen, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-
als, chemical cloths, or solvents (alcohol, ammonia, benzene, thinners, etc.) as such materials may damage the device panel or cause color and quality deterioration. WARNING Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibil-
ity is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the drivers eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle. Read the following safety precautions for your safety Notations used within this User's Manual Before using the product, read the contents of this user's manual carefully and use this product safely. WARNING Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle. The design and speci cations of this product may change without prior noti cation for product and service improvement. The actual features in the vehicle may differ from the illustrations. For more accurate information about the vehicle, please refer to the catalogue. This Audio system contains open source software, including without limitation, software distributed and/or modi ed under the GNU General Public license, Version 2, June 1991, and the GNU lesser General Public License, Version 2.1, February 1999. For additional information and to obtain related materials including without limitation, the previous referred to licenses and software, please contact us at MOBIS_OSSrequest@mobis.co.kr CAUTION Information on matters that could potentially lead to injury or vehicle damage/malfunction Information that could lead to higher user safety i Information Information and tips that provide additional user convenience in using the product NOTICE Information on specific features that facilitate proper product use and functional understanding Information on terminology used within this manual iPod iPod is a registered trademark of Apple Inc. Bluetooth Wireless Technology The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth Wireless Technology enabled cell phone is required to use Bluetooth Wireless Technology. Bluetooth Wireless Technology phone compatibility can be checked by visiting https://www.kia.com part.1 Basic Warnings and Cautions Key Product Features Component Names and Functions Starting the System for the First Time Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked. Basic Safety Warnings Do not stare at the screen while driving. Staring at the screen for prolonged peri-
ods of time could lead to traffic accidents. Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock. Heed caution not to spill water or intro-
duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction. If you use phone related functions while driving, you will find it difficult to concen-
trate on operating the vehicle and the current traffic conditions, so the possibility of an accident may increase. Please use phone related functions only when parked. 1-2 I Basic Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-
function. Continued use in such con-
ditions could lead to accidents (fires, electric shock) or product malfunctions. Do not touch the antenna during thun-
der or lightening as such acts may lead to lightning induced electric shock. Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents. For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen.(The screen will only operate when the parking brake is ON for man-
ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.) Safety Cautions Pay attention to traffic conditions while driving. Operating the device while driving could lead to accidents due to a lack of atten-
tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi-
cle is in motion. The touch screen fea-
ture will be supported once the vehicle has stopped. Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents. Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair-
ment. (Adjust the volume to a suitable levels before turning off the device.) If you want to change the position of device installation, please inquire with your place of purchase or service main-
tenance center. Technical expertise is required to install or disassemble the device. Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge. Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute. Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen. When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-
als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate-
rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center. Prevent caustic solutions such as per-
fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration. 1 0 Warnings and Cautions I 1-3 Key Product Features This device is a Multimedia system equipped with a multifunc-
tional player that supports Radio (FM, AM), USB, iPod, AUX and Bluetooth Audio features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment. Miscellaneous Bluetooth Wireless Technology Convenient use of Bluetooth Handsfree by using buttons within the steering wheel control Digital Screen Control Features Easy control of features through touch screen options Steering Wheel Control Control over audio features, Bluetooth through the steering wheel control for maximum conve-
nience. Display Wide TFT-LCD Display Provides high quality video through a Wide TFT-
LCD Display using an LED Back Light. Touch screen for maximum user convenience. Digital Tuner Feature Digital Tuner using PLL method that supports Radio memory of 40 broadcast stations. Radio broadcast station name Displays broadcast station names. Support for various Media Formats Support for various media formats, including Radio, USB, iPod, AUX and Bluetooth Audio Streaming modes. Multimedia Player 1-4 I Basic Component Names and Functions Head Unit Name RADIO MEDIA SEEK TRACK POWER/
VOL Description Converts to FM/AM mode Each time the key is pressed, the mode is changed in the following order: FM AM FM. Moves to MEDIA mode. If the media is not connected MEDIA mode will not be activated. When the key is pressed shortly (for less than 0.8 seconds), FM/AM mode: Plays the previous/next fre-
quency. MEDIA (USB/iPod) mode: Changes the track, file or title (except for AUX). When the key is pressed and held down (for over 0.8 seconds), FM/AM mode: Continuously changes the fre-
quency until the key is released. MEDIA (USB/iPod) mode: Rewinds or fast forwards the track or file (except for Bluetooth Audio, and AUX). When power is off, press to turn power on. When power is on, press and hold for over 0.8 seconds to turn the power off. When power is on, press shortly for less than 0.8 seconds to turn Audio off. Turn left/right to adjust the volume. Name HOME PHONE Description Displays the HOME screen. Displays the Bluetooth phone mode. SETUP Moves to the Setup screen. TUNE FM/AM mode: Changes the frequency. MEDIA (USB/iPod) mode: Changes the track, file or title (except for Bluetooth Audio, and AUX). RESET Resets the system settings. (Preset radio channels and other data will not be deleted) The actual feature in the vehicle may differ from the illustration. 1 0 Component Names and Functions I 1-5 Steering Wheel Control Name Description MODE VOL +
VOL -
For more details, refer to Connectivity guide. Each time this key is pressed, mode is changed in the following order: FM AM USB or iPod AUX Bluetooth Audio FM If the media is not connected, the corresponding modes will be disabled Press and hold the key (more than 0.8 seconds) to turn the Audio system on/off When power is off, press the key to turn power back on Controls the volume When keys are pressed quickly. (less than 0.8 sec-
onds) FM/AM mode: searches broadcast frequencies saved to Presets Media (USB/iPod) mode: changes the track, file or title (except for AUX) When keys are pressed and held. (more than 0.8 seconds) FM/AM mode: automatically searches broadcast frequencies Media (USB/iPod) mode: quickly looks up songs
(excluding AUX and Bluetooth audio files) Name Description When pressed quickly. (less than 0.8 seconds) When pressed in the dial screen, makes a call When pressed in the incoming call screen, answers the call When pressed during call waiting, switches to waiting call (Call Waiting) When pressed and held. (more than 0.8 seconds) When pressed in Bluetooth Hands-free, redials the last dialed call When pressed during a Bluetooth Hands-free call, switches call back to mobile phone (Private) When pressed while calling on the mobile phone, switches call back to Bluetooth Hands-free
(operates only when Bluetooth Hands-free is connected) When pressed during a call, ends the phone call When pressed in the incoming call screen, rejects the call The actual feature in the vehicle may differ from the illustration. 1 0 Component Names and Functions I 1-7 Starting the System for the First Time Turning the System On/Off Press the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear. Pressing the power key on the head unit will display the safety guide. To change the system language between English, French, Spanish and Korean press the Language button. NOTICE Cannot operate the system while it is booting up. It may take some time for all of features of the system. Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver. i Information If you turn off the system during a phone call using the Hands-free feature, then the call will automatically switch to your mobile phone. NOTICE Check the volume when turning on the system. Before turning on the system, adjust the volume to a reasonable level. System Reset The System Reset function restores the system when it is not operating correctly. Press and hold the RESET key for a sec-
ond or longer. (It is recommended that you press the RESET key using a tool, such as a pin or a clip.) 1 0 Starting the System for the First Time I 1-9 Battery Warning Message Always use the system while the car engine is running. If you turn on the sys-
tem while the engine is off, a battery warn-
ing message will appear. When the engine starts, the message will disappear. Restrictions on Features for Safety Measures Several features are limited while driving. The restriction screen will disappear when shifting gears into P or putting the parking brake on. NOTICE If you use the system for a long time with the engine off, the battery may become completely discharged. 1-10 I Basic Home Screen Controls Menu Con guration for the Home Screen Tap the icon on any screen to display the Home Screen below. Features Description Radio/
Media Widget Connectivity Widget All Menus My Menu Shows brief information on the radio or media that is now playing. Tap the area to move to the mode that you are listening to. Shows any connected devices such as iPod and Bluetooth. Shows all of the items in the system menu. You can add up to eight menus here. Add your favorite menus to have quick and easy access to them. Apps/Info Moves to the Apps/Info screen. Setup Moves to the Setup screen. Information Display on the Status Bar Displays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of sys-
tem status details and events. Icon Description Displayed when the audio is muted. Displays the remaining battery of the Bluetooth phone. Displayed when connected to Bluetooth for handsfree. Displayed when connected to Bluetooth for streaming audio. Displayed when connected to Bluetooth for streaming audio and handsfree. Displayed when downloading contacts or recent calls from the Bluetooth phone. Displayed while on a call with the Bluetooth phone. Displayed when the microphone of the Bluetooth phone is muted. Displays the signal strength of the Bluetooth phone. 1 0 Starting the System for the First Time I 1-11 On-Screen Touch Controls Learn how to touch the screen to operate the system. Drag & Drop Select a menu or item you want, then drag and drop it to where you want to place it. Select Tap lightly on a menu or an item to select it. NOTICE The system will not recognize your touch if you wear a glove or other non-conductive material. Touch the screen using your nger, an electrostatic touch-screen glove, or a stylus pen. Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from. Adding Your Favorite Menu Items to My Menu From the Home screen, select My Menu and then Edit From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left. To remove the item from My Menu, drag item from the left and drop them on the right. i Information Up to eight items can be added to My Menu. 1-12 I Basic Flick (Quick Scrolling) Drag the frequency bar to the left or right to move to the frequency that you want. From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu. Quickly moves up and down in the list. NOTICE Moving the list when there are many items will display a handler on the right of the display. You can easily move many items at a time with the handler. You can view the previous or next image by flicking left/right on an image on the USB Image screen. Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available. 1 0 Starting the System for the First Time I 1-13 Press and Hold buttons Pressing the in the music player will fast forward/rewind the music. and 1-14 I Basic part.2 Radio/Media FM/AM USB iPod AUX Bluetooth Audio Radio/Media FM/AM Features Description You can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home screen. Preset Frequencies FM/AM Mode Display Controls Frequency Bar Frequency Presets Menu i Information If you press the RADIO key when the power is off, the power will turn on and a radio broadcast will be tuned from the current mode. If you are in radio mode, select the media widget from the Home screen to access the radio player. 2-2 I Radio/Media The stored preset frequencies are displayed for user selection. After selecting frequency, press and hold the preset button for over 0.8 seconds. A beep sound will be heard and the fre-
quency is to be stored in the selected pre-
set button. Flick the preset frequencies up/down to scroll quickly through presets. Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel. Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want. Displays the current frequency. Shows the stored presets for user selection. List Moves to the frequency list. Preset Scan Plays preset frequencies for 10 seconds per item. Sound Settings Moves to the Sound Settings. Features Scan/
Preset Scan Band Info Scan SEEK/TRACK TUNE Description Displays an active mode from Scan and Preset Scan modes. Changes to the desired band from among FM and AM. Turns the Radio text information transmitted from the broadcasting station on and off. Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. Pressing this button briefly (less than 0.8 sec-
onds): Seeks the previous/next frequency. Pressing and holding this button (for more than 0.8 seconds): Moves quickly through all of the frequencies. The moment that you release the button, the system seeks the next available frequency. TUNE knob to manually seek avail-
Turn the able frequencies. FM: Increment/decrement by 200 kHz AM: Increment/decrement by 10 kHz 2 0 FM/AM I 2-3 USB Before Playing a USB MP3 Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on. Files that are not standard format music/image files will not be played. Take caution so that the USB connector does not come in con-
tact with body parts or objects. Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction. Make sure to connect/disconnect external USB devices with the audio power turned off. The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB. The use of USB devices for purposes other than playing music For MP3/WMA/OGG files, only music files with compression and image files is prohibited. rates between 8Kbps ~ 320Kbps can be played. Heed caution to static electricity when connecting/disconnecting external USB devices. Encoded MP3 Players will not be recognized when connected as an external device. When connecting an external USB device, the device may not properly recognize the USB is in some states. Do not use the USB I/F to charge batteries or USB accessories that generate heat. Such acts may lead to worsened perfor-
mance or damage to the device. The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle. Only products formatted with byte/sectors under 64Kbyte will be When using mass storage USB devices with separate logical recognized. USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-
tem, are recommended. File systems other than FAT12, FAT16, FAT32, exFAT, and NTFS are not supported. Some USB devices may not be supported due to compatibility issues. 2-4 I Radio/Media drives, only files saved to the root drive can be played. When application programs are installed to specific USBs, files may not properly play. The device may not operate normally if MP3 Players, cellu-
lar phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device. Charging through the USB may not work for some mobile devices. The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory. The device may not support normal operation when using for-
mats such as HDD Type, CF, or SD Memory. Upon playing iPods, please use a dedicated iPod car cable. Normal operations cannot be guaranteed when other cables are being used. The device will not support files locked by DRM. (Digital Rights Management) USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized. Only use Plug type connector products, as shown in the figure below. To play USB MP3, the USB device must be connected to the USB port in the front multibox. The USB port in the center con-
sole storage (if equipped) is for charging only. Plug Type Connector Product Name Manufacturer XTICK BMK SKY-DRV TRANSCEND JetFlash Sandisk Cruzer Micro ZyRUS NEXTIK LG BMK Technology Sky Digital Transcend SanDisk ZyRUS Digiworks i Information Problems that occur through use of USB devices not listed within the above table are not covered by the product warranty. 2 0 USB I 2-5 Supported USB MP3 music speci cations Name MP3 File Specification Recommended Bit Rates and Sampling Frequency ID3 Tag Detailed Specifications Description Specification: MPEG1 AUDIO LAYER 3 Acceptable sampling frequency: 32, 44.1, 48 (kHz) Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps) 96, 128, 192 Kbps fixed bit rate/44.1kHz Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tags Maximum directory layers: 20 layers Maximum length of folder name/file name: 255Bytes Supported characters for folder name/file name:
Alphanumeric characters, Korean standard charac-
ter set 2,350 characters, Simplified Chinese 4888 characters Maximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored onto one USB: 8000 i Information The sound quality of MP3 files that use bitrates exceeding 192 Kbps cannot be guaranteed. When using files without fixed bit rates, some features (FF/REW features) may not properly operate. 2-6 I Radio/Media USB Mode Display Controls Features Description Previous File Play/Pause Next File Repeat If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file from the beginning (Depends on the play time) If play time is less than 3 seconds, moves to previous file If play time is more than 3 seconds, play the current file from the beginning If button is pressed (more than 0.8 seconds): It rewinds the track Plays/pauses the current file If button is pressed (less than 0.8 seconds):
Moves to the next file If button is pressed (more than 0.8 seconds): It fast-forwards the track Repeats the current file If select the song in the file tab on the list screen: Press the Repeat button to switch
, repeating between repeating one song folder If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Press the Repeat button to switch between repeating one song
, and turning repeat off and turning repeat off Shuffle Plays files in random order If select the song in the file tab on the list screen: Press the Shuffle button to switch
, between Shuffle Folder and turning shuffle off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Press the Shuffle button to switch between Shuffle Category and turning shuffle off
, Shuffle All 2 0 USB I 2-7 Features Mode File Index Repeat/
Shuffle/Scan Play Time Song Info Description Displays current operating mode Shows the current file/total files within the USB From Repeat/Shuffle/Scan, displays the current operating function Displays the current play time/total play time Displays the information of the current track When a track in the file tab on the list screen is selected: Displays folder, file, title, artist, album info When a track in the other tabs on the list screen is selected: Displays artist, title, album info List Moves to the list screen Back Button Converts to basic mode screen Features Description Scan Scans the beginning parts of USB files (approx. 10 seconds per file) If select the song in the file tab on the list screen: Press the Scan button to switch
, and between Scan Folder turning scan off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Press the Scan button to switch between Scan cat-
egory and turning scan off
, Scan All Add to Playlist: Add the current track to the Playlist: Playlist is placed on the left tab in the list Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. Turn the If the desired track is displayed, press the knob to play the track. TUNE knob to search a desired track. TUNE TUNE knob is not pressed within If the 5 seconds of searching tracks, the track info for the current track is restored. Menu TUNE 2-8 I Radio/Media Features Folder/
Category Name Current Song Description Displays folder/category name in the list Displays current playing file name Back Button Converts to basic mode screen Upper Folder/
Category Moves to Upper Folder Features Description Add to Playlist: Adds the current track to the Playlist: Playlist is placed on the left tab in the list (Maximum 100 files) Select a desired track and press Add to Playlist to add the track in the playlist. Delete from Playlist: Select a track you want to delete from the playlist and press Delete from Playlist to delete the track in the playlist Now Playing: When moving to a different list screen, moves to the list page where the cur-
rent file is located (Becomes disabled when the current list includes the current file) Search tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album. If access the search menu while playing a track, it moves to the previous search mode. If button is pressed (less than 0.8 seconds):
Plays previous/next track. If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or fast-forward the track. Menu Search Menu SEEK/TRACK TUNE TUNE knob to move the focus to the Turn the previous/next list. If the desired track is displayed, press TUNE knob to play the track. 2 0 USB I 2-9 iPod Using iPod Devices iPod is a registered trademark of Apple Inc. iPod mode will not operate if the con-
nected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not prop-
erly operate with the Multimedia system. For fifth generation iPod Nano devices, the iPod may not be recognized when the battery level is low. Please charge the iPod for use. Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system. If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual) 2-10 I Radio/Media If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in short time, it may cause abnormal operation. The time for recognition of iPod/iPhone may vary depending on device type, firmware version and iOS version. For some iPod Touch and iPhone devices, connecting Bluetooth while the iPod is operating may result in discon-
tinued iPod sound. When such devices with Bluetooth support are connected, this problem occurs as the sound source is changed from the Dock Connector
(USB connector cable) to Bluetooth. To prevent this symptom, Bluetooth Audio function in the Multimedia system is limited if iPod/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth connection. To listen to the iPod sound, reconnect the USB cable or change the audio out-
put settings in iPod/iPhone to Dock. In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/ iPhone products) During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/
iPhone product.) will charge the iPod through the head unit. The use of genuine iPod cables sup-
The use of genuine iPod cables sup-
plied by Apple is recommended. (The plied by Apple is recommended. (The use of other products may result in use of other products may result in noise or abnormal operation.) noise or abnormal operation.) To play iPod music through cable con-
nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only. When connecting with the iPod cable, make sure to fully insert the jack to pre-
vent communication interference. If the iPod is connected to the vehicle while it is playing, a high pitch tone may sound for about 1~2 seconds immediately after connection. If possible, connect the iPod to the vehicle with the iPod stopped/
paused. Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again. When connecting to iPod Nano/Classic, the Kia Motor logo appears on the Apple device. For the iPod Nano 6 genera-
tion, however, the logo image does not appear since it is not supported. Also, all iPhone and iPod Touch products do not support this function. In Apples iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications specifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the playlist may not be displayed and played in the iPod mode. If the Apple Podcasts and iBooks apps are not installed on the Apple device, but the Apple device provides the Podcast and Audiobook lists, you can play files in other categories in iPod mode. The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your con-
nected device. 2 0 iPod I 2-11 Caution While using a connected iPhone/iPod Touch device, it may not operate nor-
mally if the user changed some func-
tions in the device. When calling with an iPhone connec-
tion, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status. If lots of songs have the same informa-
tion, skipping may occur when previous/
next song is executed due to an Apple device feature. Also problems may occur depending on device type or iOS version. If lots of songs have the same informa-
tion, it may occur difference of playing songs between the Multimedia system and Apple device. Reset the device or delete the same songs in the Apple device using iTunes. If you control pause, repeat, shuffle, or seek songs when the play time is when the play time is less than 3s before fin-
ished playing, it may occur difference of playing song between the Multimedia system and Apple device. Access to iPod music from another mode or pause a song and then play a song again in Apple device. Type 1G 2G 3G iPod Mini iPod Shuffle iPod Nano iPod Touch iPad iPad Mini
(iOS 1.1 not supported) We recommend that your Apple device uses the latest firmware since some problems may occur due to an outdated firmware or other software related issues. 5G 4G Not Supported Not Supported 6G 6.5G 7G Not released Not released
(Unable to charge, Not verified, Normal working not guaranteed)
(Unable to charge, Not verified, Normal working not guaranteed) iPod Classic Not Supported
(iPod with Video)
(iPod Classic)
(iPod Classic) Not released 4 4S 5 5C 5S 6 6+
Type 3G 3GS iPhone 2-12 I Radio/Media Not verified, Normal working not guaranteed If connect to the Multimedia system while podcast or iTunes music down-
loading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iPod/iPhone to the Multimedia system when downloading is finished or the file deleted. If connect to the Multimedia system while sync, it may occur some problems. Try to use iPod/iPhone connection after sync complete. (To learn more, refer to your iPod manual) iPhone and iPod Touch devices are guaranteed to work normally on iOS 9.3.2 or below. However, they may not work normally on future iOS versions as their operations have not yet been tested. Caution If the iPhone/iPod Touch supports Bluetooth, it is unable to use Bluetooth Audio if the Apple device that is con-
nected to the Multimedia system through both USB connection and Bluetooth. Disconnect the USB connec-
tion then use Bluetooth Audio. If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it may occur sound will not output in iPod mode. If AUX cable connected to iPod/iPhone but not connect to the Multimedia sys-
tem, it may occur sound will not output in iPod mode due to iPod/iPhones fea-
ture. Especially, if you use AUX cable like pictures, this problem may occur. Disconnect AUX cable from iPod/iPhone first, then connect to the Multimedia system via USB. Or change settings to Dock in iPod/iPhone. 2 0 iPod I 2-13 iPod Mode Display Controls Features Description If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file from the beginning (Depends on the play time) If play time is less than 3 seconds, moves to previous file If play time is more than 3 seconds, play the current file from the beginning If button is pressed (more than 0.8 seconds): It rewinds the track Plays/pauses the current file If button is pressed (less than 0.8 seconds):
Moves to the next file If button is pressed (more than 0.8 seconds):
It fast-forwards the track Previous File Play/Pause Next File Features Mode Song Index Repeat/Shuffle Play Time Song Info List Description Displays current operating mode Shows the current song/total songs From Repeat/Shuffle, displays the current operating function Displays the current play time/total play time Displays the artist/song title/album info Moves to the list screen Repeat Shuffle
, and turning repeat off Repeats the current file Press the Repeat button to switch between repeat-
ing 1 track Plays files in random order When pressing Shuffle button, it changes to deactivate shuffle then shuffle category repeat Shuffle Category: Shuffle song in the current category Back Button Menu Move to home/previous mode screen Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. 2-14 I Radio/Media Features Description TUNE TUNE knob to search a desired Turn the track. If the desired track is displayed, press the TUNE knob to play the track. TUNE knob is not pressed within If the 5 seconds of searching tracks, the track info for the current track is restored. 2 0 iPod I 2-15 Features Description Category Name Displays the category name Category List Back Button Upper Folder Search Menu SEEK/TRACK TUNE 2-16 I Radio/Media Displays the contents of selected category If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly. Converts to basic mode screen Moves to Upper Folder Search tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook. If access the search menu while playing a track, it moves to the previous search mode. If button is pressed (less than 0.8 seconds):
Plays previous/next track. If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or fast-forward the track. TUNE knob to search a desired Turn the track. If the desired track is displayed, press the If you do not anything with the knob for 5 seconds, the TUNE knob search will be terminated. TUNE knob to play the track. NOTICE If only a cable is connected to the AUX without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack. When the external device power is connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use. AUX Connecting an External Device If an external device connector is con-
nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored. AUX mode can be used only when an external audio player has been con-
nected. The AUX volume can also be controlled separately through the connected device. 2 0 AUX I 2-17 Bluetooth Audio Bluetooth Audio Mode Display Controls Features Artist Info Title Description Name of current artist Name of current song If play time is less than 3 seconds, moves to the previous file If play time is over than 3 seconds, plays the current file from the beginning This function may differ depending on the model of mobile phone Previous File Play/Pause Plays/Pauses Bluetooth Audio Next File Repeat Shuffle Menu Moves to the next file Repeats the current file. This function may differ depending on the model of mobile phone. Plays files in random order. This function may differ depending on the model of mobile phone. Connections: Moves to the Bluetooth Settings screen. You can pair a new device or change/
delete paired device(s). Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. SEEK/TRACK TUNE Plays the previous/next file TUNE is not supported. i Information Artist info and Title may not be supported by mobile phone. Features Description Mode Displays the current operating mode Phone Name Displays name of connected phone 2-18 I Radio/Media Bluetooth Connection Settings Settings for pairing, connection and dis-
connection of a Bluetooth device. In Bluetooth Audio play screen, select Menu and then Connections . i Information If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones. 2 0 Bluetooth Audio I 2-19 MEMO part.3 Bluetooth Before Using the Bluetooth Handsfree Bluetooth Connection Bluetooth Phone The Bluetooth Handsfree feature may not be supported in some mobile phones. Precautions for Safe Driving Bluetooth is a feature that enables driv-
ers to practice safe driving. Connecting the head unit with a Bluetooth phone allows the user to conveniently make calls, receive calls, and manage the phonebook. Before using Bluetooth Wireless Technology, carefully read the contents of this users manual. Excessive use or operations while driv-
ing may lead to negligent driving prac-
tices and be the cause of accidents. Do not operate the device excessively while driving. Viewing the screen for prolonged peri-
Viewing the screen for prolonged peri-
ods of time is dangerous and may lead ods of time is dangerous and may lead to accidents. When driving, view the to accidents. When driving, view the screen only for short periods of time. screen only for short periods of time. Bluetooth Before Using the Bluetooth Handsfree What is Bluetooth Wireless Technology?
Bluetooth Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz fre-
quency to connect various devices within a certain distance. Supported within PCs, external devices, Bluetooth phones, PDAs, various elec-
tronic devices, and automotive environ-
ments, Bluetooth Wireless Technology to be transmitted at high speeds without having to use a connector cable. Bluetooth Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth mobile phones through the Multimedia system. 3-2 I Bluetooth CAUTIONS upon Connecting Bluetooth Phone Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth fea-
tures. Even if the phone supports Bluetooth Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth power is turned off. Disable the hidden state or turn on the Bluetooth power prior to searching/
connecting with the head unit. If Auto Connection is used, the Bluetooth phone is automatically connected when the ignition is turned on, making it unnec-
essary to have to connect the phone with the head unit every time. If you do not want automatic connection with your Bluetooth device, turn the Bluetooth feature off of the Bluetooth device. Park the vehicle when connecting the head unit with the mobile phone. Bluetooth connection may become inter-
mittently disconnected in some mobile phones. Follow these steps to try again. 1. Turn the Bluetooth function within the mobile phone OFF/ON and try again. Turn the mobile phone power OFF/
ON and try again. Completely remove the mobile phone battery, reboot, and then again. Reboot the Multimedia System and try again. Delete all paired devices from both of Phone and Head Unit sides and then try again 2. 3. 4. 5. The Handsfree call volume and quality may differ depending on the mobile phone. Pairing Bluetooth devices and use of other Bluetooth features are not sup-
ported when the vehicle is in motion. For safety, please first park your vehicle. If you continue having issues with downloading contacts, please check the mobile phone status or inquire of the mobile phone manufacturer. 3 0 Before Using the Bluetooth Handsfree I 3-3 Pairing a New Device Through the Phone Settings SETUP key. Select Bluetooth . Select S e l e c t Bluetooth Connection . S e l e c t Add New . Pair your car after your mobile phone detects the Bluetooth device. Enter the passkey or accept the authoriza-
tion popup. Connect Bluetooth. Connecting Bluetooth Devices Connects the Bluetooth devices that you add. Connecting Devices by Selecting Phone/Call Select PHONE key or key in the steering wheel control. Select the name of the device to connect. Connect Bluetooth. The default passkey is 0000. The vehicle name above is an example. Check the actual information on the product. Bluetooth Connection Pairing a New Device Before you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car. Up to 5 Bluetooth devices can be paired. Only one Bluetooth device can be con-
nected at a time. Pairing a New Device by Selecting Phone/Call Select PHONE key or key in the steering wheel control. Pair your car after your mobile phone detects the Bluetooth device. Enter the passkey or accept the authorization popup. Connect Bluetooth. 3-4 I Bluetooth Connecting Devices Through the Phone Settings SETUP key. Select Bluetooth . Select Select Bluetooth Connection . Select the name of the device to connect. Connect Bluetooth. Disconnecting Bluetooth Devices Disconnects Bluetooth devices that are connected. SETUP key. Select Bluetooth . Select Select Bluetooth Connection . Select the name of the device to disconnect. Deleting Bluetooth Devices Deletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it. SETUP key. Select Bluetooth . Select S e l e c t Bluetooth Connection . S e l e c t Delete Devices . Select the device name to delete. Select Delete . 3 0 Bluetooth Connection I 3-5 i Information The battery level icon and the call signal strength indicator may not be supported in some Bluetooth devices. The battery level may differ from the actual level remaining. Bluetooth Phone Icons Description Phone Status Icons Shows the current phone status in the right top of the display. You can use Bluetooth phones when a Bluetooth Hands-free connection is established. You can use Bluetooth audio features when a Bluetooth audio connection is established. You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established. Call signal strength indicator Battery level of the Bluetooth devices connected Downloading Call History list Downloading Contacts In a Bluetooth phone call Microphone muted 3-6 I Bluetooth Dial Dials a call after the Bluetooth devices are connected. Select PHONE key or key in the steering wheel control. You can also select All Menus Phone . Name Description Accept/Reject Call Use the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone Makes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to auto-
matically dial that num-
ber again. Moves to a screen of Phone Settings. Deletes the numbers that you entered. Keypad Call Settings Delete i Information Some types of mobile phones may not support the Speed Dial function. If there is an incoming call after you made a Bluetooth connection, a popup message will appear. Name Accept Reject Description Answers the call. Ignores the call. i Information In some mobile phones, the caller's number may not be displayed, and the Reject feature may not be supported. 3 0 Bluetooth Phone I 3-7 i Information If the caller's number is listed in Contacts, the caller's name will be displayed. Otherwise, only the number will be displayed. In some mobile phones, the phone number may not be displayed. In some Bluetooth devices, the Use Private feature may not be supported. In some Bluetooth devices, the Switch feature may not be supported. During a phone call on a Bluetooth Hands-
free, you cannot access other modes, such as Radio and Settings. Depending on handset types, the in-call volume the other party hears may differ. If the other party hears your voice too low or too loud, adjust the mic volume. Name Description Use Private End Contacts Outgoing Volume Keypad Switch Switches a voice call from the car Hands-free to the mobile phone. Ends a call. Displays the Contacts list. Displays the Mic Volume settings. You can adjust the in-call volume that the other party hears
(level 1 - 5). Moves to a screen for entering ARS numbers. Switches to a call on hold, if any. You can also switch calls by select-
ing the number in the Information Display. The Switch function switches the current call to a waiting call in order to answer a new incoming call. Using the Menu During a Phone Call When making a call, you can use the fol-
lowing menu items. 3-8 I Bluetooth i Information In some mobile phones, call records may not be added to your Call History. Calls from restricted ID's are not added to your Call History Information. Up to 50 calls can be added in each Dialed Calls/Received Calls/Missed Calls list. The durations of each dialed/received call are not displayed in your car's Call History list. While the call history download is in progress, the status bar displays an icon (
). If the call history download is turned off on the Bluetooth device, the call history download will fail. Some devices require a device authentication for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal. Some devices do not support call history download. Check if your Bluetooth device supports download feature. Call History Select PHONE key, and then Call History . Name All Dialed Received Missed Call History Download Description Lists the all call history. Lists the calls that you made. Lists the calls that you have received. Lists the calls you missed. Displays all of your call history. Select from the list to dial the number. Downloads the call his-
tory information from your mobile phone. 3 0 Bluetooth Phone I 3-9 Some devices require a device authentication for downloading your contacts. If download fails,check your phone screen and con rm the download if necessary. Some devices do not support contacts download feature. Check if your Bluetooth device supports contacts download. Contacts Select PHONE key, and then Contacts
. Name Description Contacts List Download Search The list of Contacts. Select from the list to dial the number. Downloads contacts from your mobile phone. Searches Contacts. i Information Up to 5000 phone numbers can be downloaded from a single, paired Bluetooth device. You cannot edit or delete downloaded phone numbers from your car. Contacts can be viewed only when the Bluetooth device is connected. Even if the Bluetooth device is disconnected, t h e d o w n l o a d e d d a t a w i l l r e m a i n .
(Note that deleting a paired phone will also delete all downloaded Contacts and Call History data) Downloaded phone numbers may be lost depending on the condition of the head unit. Keep your important data in a safe place. Contacts from both the SIM card and your mobile phone are downloaded at the same time by default. The status bar displays a (
) while downloading contacts. The download will not be available if the contacts download function is turned off on your Bluetooth device. 3-10 I Bluetooth Favorites Select PHONE key, and then Favorites
. Name Description Favorites Add New Delete Items Delete All Lists the phone num-
bers saved as Favorites. Select from the list to dial the number. Adds a new number to Favorites. Deletes numbers that you select from Favorites. Deletes all of the num-
bers from Favorites. 3 0 Bluetooth Phone I 3-11 MEMO part.4 Other Features Siri Eyes Free Camera Other Features Siri Eyes Free How to start Siri If you want to use Siri, you have to con-
nect your iOS device to Multimedia system through Bluetooth.
(Please check whether your iOS device supports Siri and turning Siri On) Then you can use Siri while pressing and key on the steering wheel. holding How to use Siri When you access the Siri screen while key on the pressing and holding steering wheel, you can press Speak but-
ton and then you can speak what you want. Please see the Multimedia system only supports Phone related functions. Other functions will be performed in your iOS device. If you press voice key quickly, Siri would re-start. If you hold down voice key, Siri would be terminated and the screen would go back to the previous screen. Eyes-Free mode would be acti-
vated automatically while you are driving. When shifting gears into P or putting the Parking brake on, Eyes-Free mode would be deactivated automatically. i Information Functions and feedbacks from voice commands via Siri are executed in iOS device. If iOS version changed, functions and feedbacks can be changed according to iOS device. 4-2 I Other Features Camera WARNING
- Backing Up & Using Camera Never rely solely on the rear view camera when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supple-
ment the rear view camera by looking over your shoulders and checking your rear view mirrors. Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you even suspect that a person, and especially a child, might be behind you. i Information A separate chipset is used for the camera screen while booting up, so it may be different after booting up. Steering-linked camera This device is connected to a rear detection camera to see behind the car for safe reversing. The Rear View Camera turns on auto-
matically if you shift the gear to R when the power is on or the engine has started. While the device boots up, shift the gear to "R" to activate the rear detection cam-
eras. Shift the gear to another position to deactivate the rear detection camera. NOTICE A wide-angle lens is installed as the rear detection camera to get a wider view, so there may be some difference between the actual distance and the distance that appears. on-screen. For safety, make sure to view the back, right, and left sides of the car for yourself. The color of the parking guidelines displayed in the picture may differ from the actual screen. When booted up, blinking may occur when you switch to a UI screen. Name Red Line Yellow Line 1 Yellow Line 2 Yellow Line 3 Yellow Line 4 Blue Line Description About 0.5 m from the rear bumper About 1 m from the rear bumper About 3 m from the rear bumper Trajectory of the wheel on the drivers side Trajectory of the wheel on the passenger side Neutral steering trajec-
tory As you reverse your car and monitor the area behind your car, the steering-linked driving trajectory and the neutral driving trajectory are both displayed. 4 0 Camera I 4-3 MEMO part.5 Setup Setup Sound Settings Display Settings Bluetooth Settings Clock Settings Language Settings Keyboard Settings Screen Saver Settings System Info Setup Setup Setup is the screen to control Audio sys-
tem settings. To enter the screen, select the key or the Setup icon in All Menus. SETUP 5-2 I Setup Features Description Features Description Sound Display Bluetooth Connectivity Home Screen Provides the sound con-
trol options for Position, Bass, Mid, Treble, Volume and Advanced settings. Provides the Mode/
Illumination settings. Provides the Bluetooth Connection/Auto Connection Priority/
Bluetooth System Information settings. For more details, refer to Connectivity guide. Provides the function to customize the three menu items at the bot-
tom of the Home Screen. Clock Language Keyboard Screen Saver System Info Display Off Provides the Time and View settings. Provides the Change Language settings. Provides settings to switch keyboard layouts. Provides the Clock/
None settings. Provides software and storage space informa-
tion. Provides the Display Off
(touch activation) func-
tion. Sound Settings Features Description Display Settings Adjusts the sound effects for the whole system. Advanced Default Beep Select additional audio options such as Speed Dependent Volume Control that automatically controls Audio volume according to vehicle speed. Resets the sound to fac-
tory default settings. Select to activate a beep when pressing buttons. Adjusts the level of illumination for the entire system. i Information Advanced sound settings may differ according to selected AMP option. The seat shape may differ according to vehicle model. Features Description Position Tone Select the Up/Down/Left/
Right button to control sound positioning. Press Center to concen-
trate the sound on the center of vehicle. Drag the slide bar to control bass/mid/treble settings. Press Center to initialize the settings. Features Description Mode Illumination Default Display Off Select any of LCD illumi-
nation change modes:
Automatic (changes the level automatically), Daylight, and Night. Set the levels of illumina-
tion for day and night. Press Default to initialize the settings. Resets the display to fac-
tory default settings Provides the Display Off
(touch activation) function. 5 0 Setup I 5-3 Bluetooth Settings Changes Bluetooth phone settings. Bluetooth Settings Select the SETUP key Select Bluetooth . Bluetooth Connection Settings Select the SETUP key Select Bluetooth Select Bluetooth Connection . Features Description Paired Device List Bluetooth Audio Connection Status Bluetooth Hands-Free Connection Status Add New Delete Devices Help Displays the paired Bluetooth device list. When selecting from the list, the device is connected or discon-
nected. An icon appears when you make a Bluetooth Audio con-
nection. An icon appears when you make a Bluetooth Hands-free connection. Register a new Bluetooth device. Select and delete a paired device. Switches to the Bluetooth Connection Help screen. 5-4 I Setup i Information Up to 5 Bluetooth devices can be paired. Only one Bluetooth device can be connected at a time. During a Bluetooth device connection, another device cannot be paired. When you delete a paired device, the Call History and Contacts stored in the head unit are also deleted. Bluetooth Hands-free and Bluetooth Audio functions are supported. Hands-free and audio-supported devices, such as a Bluetooth smartphone or audio, will function normally. When a Bluetooth device is connected, if the Bluetooth connection is unexpectedly disconnected, due to being out of communication range, the device powering off, or a Bluetooth communication error, the Bluetooth device automatically searches for and connects to nearby Bluetooth devices. If the system is not stable, due to a vehicle-
Bluetooth device communication error, restore the Default Factory Settings. For Default Factory Settings, the bluetooth settings are reset to factory settings. Select the SETUP key Select Bluetooth Select Default Factory Settings . Auto Connection Priority Select the SETUP key Select Bluetooth Select Auto Connection Priority . Bluetooth System Information Select the SETUP key Select Bluetooth Select Bluetooth System Info . When the engine is running, the selected Bluetooth device is automatically con-
nected. If you fail to connect the selected device, the previously-connected device is automatically connected, and if it also fails, then it tries to connect all paired devices sequentially. Depending on auto connection priority, connection to a device may take time. Features Vehicle Name Passkey Description You can change the Bluetooth device name of the vehicle. You can change the pass-
key used for Bluetooth device authentication. the initial passkey is 0000. i Information The vehicle name above is an example. Check the actual information on the product. 5 0 Setup I 5-5 Default Factory Settings You can delete all paired devices and restore the Default Bluetooth Settings. For Default Factory Settings, all paired devices are deleted, and the system is reset to factory settings. Home Screen Settings Clock Settings You can customize the three menu items at the bottom right of the Home Screen into the ones you want. On the Home Screen Settings screen, drag the menu items on the right to the area marked in blue in the screen below. Configure the settings for time and date. Using the arrow buttons, you can change the values. Clock settings do not automat-
ically change when crossing into different time zones. The time must be changed manually on this screen. i Information You can press the Default button to reset to the factory default settings. Features Daylight Saving Time 24 Hours Direct entry Description The daylight saving time
(DST) is applied. The time display is set in 24-hour format. If you tap any value, you can directly enter the number in the following screen. 5-6 I Setup Language Settings Keyboard Settings Screen Saver Settings You can configure the displayed system language. You can configure the keyboard layout for each language. You can select any of the following screen formats to be displayed when the screen or power is turned off (Press and hold the Power button). Digital clock and date Analog clock and date None When the language is changed, the sys-
tem language is automatically changed. Unique data including MP3 file name is not changed. You can configure ABCD or QWERTY keyboards for the system. i Information Configured keyboard layouts are applied to all input modes. 5 0 Setup I 5-7 System Info At the System Info screen, software ver-
sion information, updates, and storage status details are available. System Update At the System Info screen, insert the USB memory with the latest file downloaded, and then select the Update button to begin updating. The system will then reboot automatically. i Information This product needs supplemented software updates and additional functions, which collectively may take some time to complete, depending on the amount of data. Features Description CAUTION SW Info System version informa-
tion and update details are available. Select the Update button to update the system. After update is complete, the system will reboot auto-
matically. If the power is disconnected or the USB is removed during an update, the data might be damaged. Please do not turn off the vehicle while an update is in progress. 5-8 I Setup part.6 Appendix Product Specification Troubleshooting FAQ Appendix Product Specification TFT-LCD Screen Size Resolution Operating Method 7 inch(152.4 X 91.44 mm) 384000 pixels (Resolution: 800 x 480) TFT(Thin Film Transistor) Active Matrix Viewing Angle Left/Right, Top/Bottom: ALL 89 Common Name Car TFT LCD Display Audio Unit Power Supply DC 14.4 V Current Consumption 2.5 A Operating Power Sleep Current DC 9 V ~ DC 16 V 1 mA
(Head Unit Only) Operating Temperature
-20 ~ +70 C
(-4 ~ +158 F) Storage Temperature
-30 ~ +80 C
(-22 ~ +176 F) Internal Lighting LED Dimensions 178 X 139.2 X 89 mm (Main BOX) Weight 1.8 kg Radio Channels FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz) AM: 530 kHz ~ 1710 kHz(Step: 10 kHz) Sensitivity FM: Under 10 dBu/AM: Under 35 dBu Distortion Factor Within 2 %
6-2 I Appendix Bluetooth Wireless Technology Frequency Range Supported Profile Output Number of Channels 2402 ~ 2480 MHz Supported Bluetooth Specification 4.1 Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0) 79 channels CAUTION The producer and installer cannot provide services related to life safety as the concerned radio equipment is liable to radio interference. 6 0 Appendix I 6-3 Problem Possible Cause Sound does not work in AUX mode The external device is not working Are the audio connector jacks fully inserted into the AUX terminal?
Is the external device connected with a standard connector cable?
Upon turning power on, the most recent mode screen is not displayed Within modes that play files by reading external sources, such as USB, iPod, or Bluetooth streaming mode, the most recently played mode screen prior to turn-
ing off power may not properly load If the corresponding device is not con-
nected, the mode operated prior to the most recent mode will operate If the previous mode still cannot be properly played, the mode operated prior to that will operate Troubleshooting 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your Kia dealer. Problem Possible Cause There are small red, blue, or green dots on the screen The sound or image is not working The screen is being displayed but sound is not working When the power is turned on, the corners of the screen are dark Sound is working from only one speaker Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixels Has the Switch for the vehicle been turned to [ACC] or [ON]?
Has the SYSTEM been turned OFF?
Has the volume been set to a low level?
Has the volume been muted?
The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction If the screen is very dark, contact your nearest Kia dealer for assistance Are the positions of Fader or Balance sound controls adjusted to only one side?
6-4 I Appendix Problem Possible Cause Countermeasure The fuse is disconnected The power does not turn on Device is not prop-
erly connected The system does not play The vehicle battery is low Replace with a suitable fuse If the fuse is disconnected again, please contact your point of purchase or Kia dealer Check to see that the device has been properly connected Charge the battery If the problem persists, contact your point of purchase or Kia dealer Problem The image color/tone quality is low Possible Cause Countermeasure The brightness, saturation, hue, and contrast levels are not set properly Properly adjust the bright-
ness, saturation, hue, and contrast levels through Display Setup The volume level Adjust the volume level Sound does not work is set to the lowest level The connection is Check to see that the not proper The device is currently fast-for-
warding, rewinding, scanning, or play-
ing in slow mode device has been properly connected The sound will not work when the device is fast-for-
warding, rewinding, scan-
ning, or playing in slow mode Vibration is occur-
The sound may be The sound or image quality is low ring from where the conversion switch has been installed Image color/tone quality is low short-circuited and the image distorted if the device vibrates The device will return to normal once vibrations stop 6 0 Appendix I 6-5 Problem The USB does not work Possible Cause USB memory is damaged USB memory has been contami-
nated A separately pur-
chased USB HUB is being used A USB extension cable is being used A USB which is not a Metal Cover Type USB Memory is being used An HDD type, CF, SD Memory is being used There are no music files which can be played Countermeasure Problem Possible Cause Countermeasure Please use the USB after formatting it. Remove any foreign sub-
stances on the contact sur-
face of the USB memory and multimedia terminal Directly connect the USB memory with the multime-
dia terminal on the vehicle Directly connect the USB memory with the multime-
dia terminal on the vehicle Use standard USB Memory Use standard USB Memory Only MP3, WMA file formats are supported. Please use only the sup-
ported music file formats There are no titles which can be played The iPod firmware version has not been properly updated The iPod device does not recog-
nize downloads Use iTunes to download and save MP3 files into the iPod Use iTunes to update the firmware version and reconnect the iPod with the device Reset the iPod and recon-
nect with the device Bluetooth on your Set it to ON mobile phone is set to OFF The Bluetooth Make the connection connection is not made active The iPod is not recog-
nized even though it has been connected Bluetooth does not work or its limited f u n c t i o n s are available i Information While operating the device, if an abnormality occurs that cannot be corrected with the above described measures, press the RESET key to reset the system. Press and hold the RESET key (over 1 second). The device power will turn off and the system will reset. 6-6 I Appendix FAQ About Pairing Mobile Phones Q I cannot pair my mobile phone. What is the cause?
A Check to see that the mobile phone supports Bluetooth func-
tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone still cant be registered, try again after turning Bluetooth off and on, or delete the device registration on the multimedia system and cell phone and then register the cell phone again. Q What is a Passkey?
A A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered once when pairing the mobile phone for the first time. The initial passkey is 0000. You can change it with Bluetooth Bluetooth System Info Passkey menu options. SETUP Q What is the difference between pairing a mobile phone and con-
necting a mobile phone?
A Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected until the paired mobile phone is deleted from the system. Bluetooth Handsfree features, such as making/
answering calls or managing contacts, are supported only in mobile phones connected with the head unit. 6 0 Appendix I 6-7 About Making/Answering Phone Calls Q How can I answer a call?
A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, press the Accept button on the screen or the key on the steering wheel control. To reject the call, press the Reject the key on the steering wheel control. button on the screen or press About Bluetooth Wireless Technology/
Head Unit Use Environment Q What is the range of my wireless connection?
A The wireless connection can be used within 15 yards. Q How many mobile phones can be paired?
A It is possible to pair up to five mobile phones. Q What should I do if I am talking on the Handsfree but want to switch the call to the mobile phone?
A While on a call, press and hold (over 0.8 seconds) the key on the steering wheel control or press the Use Private but-
ton at the bottom of the Phone screen to switch the call to your mobile phone. Q Why is call quality sometimes poor?
A Check the reception sensitivity of the mobile phone when call quality becomes worsened. The call quality may deteriorate when the signal strength is low. Call quality may also worsen if metal objects, such as beverage cans, are placed near the mobile phone. Check to see if there are metal objects in the vicinity of the mobile phone. The call sound and quality may differ depending on the type of mobile phone. 6-8 I Appendix Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. Volume Setting Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident. Use of Speech Recognition Functions Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech recognition functions included in the system and address any errors. Important Safety Information Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual (Users Guide). Not following precautions found in this Users Guide can lead to an accident or other serious consequences. Keep Users Guide in Vehicle When kept in the vehicle, the Users Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please make certain that before using the system for the first time, all persons have access to the Users Guide and read its instructions and safety information carefully. Warning Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may to distract your attention away from the road and remove your hands from the wheel. 6 0 FCC Warning This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.
This product uses the FCC Data API but is not endorsed or certified by the FCC