VTA240B Music Center with Bluetooth User Manual

 

Instruction Manual MODEL: VTA-240B CAUTION They tevin arate | GALTION: TO PREVENT | Ti extanaon car wn anor ergo Pho nent "Paw edt ome tapos?

princes sorte | RISK OF ELECTRIC SHOCK. | gictentsaty wu cates ety Soe en | OO eC On ee a sdkcanmapiesetactane ate ceane | Moen samees pa a wee secon aetna CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. Important Safety Instructions 1, Read these instructions All the safety and operating instructions should be read before this product is operated 2. Keep these instructionsThe safety and operating instructions should be retained for future reference. 3. Heed all warnings~All warnings on the appliance and in the operating instructions should be adhered to 4. Follow alll instructions All operating and use instructions should be followed. 5. Do not use this apparatus near water - The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Donot block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Dono install near any heat sources such as radiations, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat. 9. Donot defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with cone wider than the other. A grounding plug has two blades and a third grounding prong, The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 40. Protect the power cord from being walked on or pinched particulary atthe plugs, convenience receptacies, and at the point where they exit from the apparatus. 41. Only use attachments/accessories specified by the manufacturer 42. Use only withthe cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the carVapparatus combination to avoid injury trom tip-over. 43. Unplug the apparatus during lightning storms or when unused for long periods of time. 44. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped CAUTION DO NOT OPEN AVERTISSEMENT:

RISQUE DE CHOC ELECTRIQUENE PAS OUVAT

-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within and equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. 16. oO This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth, 47. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 48. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 49. The use of the equipment in moderate ciimate. 20. The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, tablecloths, curtains, etc. 21. No naked flame sources, such as lighted candles, should be placed on the apparatus. 22. The symbol with ~ Indication AC voltage. 23. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so. Leeds edad lad Front View 4. POWER /VOLUME: Rotate clockwise to turn the unit ON. Rotate counter-clockwise to turn the unit OFF. When unit is ON, rotate to adjust the volume. 2. LED DISPLAY: When unit is ON the display is backlit, 3. FM, BT, AUX, PHONO SELECTION KNOB: Rotate to select desired function 4. 3.5mm AUX-IN JACK: Connect your external source to the AUX-IN jack. 5. BLUETOOTH INDICATOR: Indicator will illuminate in BT mode. 6 RADIO TUNER KNOB: In FM mode, turn knob to tune to desired station. Rear View DE 0 _ *

7. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. 8. AC Power Cord Connect the AC plug into a wall outlet. Itis strongly recommended that this product be operated only from the type of power source indicated on the marking label. 9. FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. Parts of the Turntable A. Turntable fo B. Safety Screw (for transport) @

Before using the unit, turn the screw clockwise using a coin or screwdriver. Important: When you transport the unit, tur the screw counterclockwise to secure the turntable Speed Selector Tone Arm holder Tone Arm - Before use, completely loosen the twist tie on the tone arm to lft tone arm. Stylus 45 RPM adaptor Cue-lever - Use this lever to lift the tone arm zonmoo si AX 1. Remove white protective needle cover by gently pulling towards front of unit LA 2. Remove any packaging materials from the unit <

3. Connect the AC power cord to a wall outlet Ty gy wD Note:

-It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label.

-To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Rotate the POWER/VOLUME knob clockwise to turn the unit on. The LED display will illuminate 2. Select the source by rotating the selection knob (FM/BT/AUX/PHONO). 3. Rotate the POWER/VOLUME knob to adjust to the desired sound level istening through RCA LINE OUT For amplifier device listening, first reduce the volume level to minimum. Insert the white and red plugs of the RCA cable into the corresponding colors on the unit. Then insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. CONDENSATION WARNING:

When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is the danger that water vapor in the air may condense on the unit, preventing proper operation. In such cases, leave the unit for 1-2 hours after plugging it into an AC outlet to allow it to stabilize at the temperature of its surroundings. St kkur doa 1. Rotate function knob to select "FM function. 2 Tune to the desired station by using the Radio Tuner Knob. Petersen ek Gu) In BT (Bluetooth) mode, this unit can play music from an extemal device with the Bluetooth feature. GETTING CONNECTED USING BLUETOOTH 1. Rotate to select "BT" function 2. The Bluetooth indicator will flash. 3. Set the Bluetooth function of your external device when the apparatus is on. 4, Set to search Bluetooth device on your external device. NOTE: The effective distance between your external device and this apparatus is 10 meters. 4, When VTA-240B" appears on the paired devices list on your external device, press "VTA-240B'

to connect If @ password is required, use 0000 then press OK on your external device. 5. When your Bluetooth connection is successful, Bluetooth LED indicator will remain lit NOTE: The Fast Forward/Rewind function is only available on your external device. Device (AUX Mode) TE Rerun ue Rotate Function Knob to select the "AUX' function. In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable CD Player, etc.) There is a AUX-IN jack on the front side of the unit. When connecting a device that has a headphone Jack, use the cable with 3.5mm plugs on either end with the front AUX-IN jack. 1. Plug one end of the AUX-IN cable (not included) into the AUX-IN jack. 2. Plug the other end of the cable into the headphone jack of the external audio source. NOTE: All operations are only available on your extemal device. Cn ker a eee 1. Rotate the Function Knob to select the "PHONO" function. 2. Gently open the top cover. Note: Be careful not to pinch your finger when opening/closing the top cover. 3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor. 4, Select the appropriate speed (4). 5) 5. Remove the tone arm-rest holder to release the tone arm, 6. Move the tone arm gently to the edge of the record (or the starting point of a track), The turntable will begin to turn. 7. When the record reaches the end, the tone arm will stop at the center of the record. Lift and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm. Important:

- Closing the top cover will help prevent dust from settling on the turntable.

- Always relock the tone arm clip before transporting the unit.

- Do not place anything on top of the tumtable cover, especially while playing a record. Maintenance / Proper Handling Handling Vinyl Records

+ Do not touch the record's grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your records quality to deteriorate. To clean a record, use a soft anti-static cloth to gently wipe the record surface. Keep records in their protective sleeves when not in use. Always store records upright on their edges Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a location subject to vibration, excessive dust, heat, cold or moisture. General Care

+ When removing the power plug from the wall outlet, always pull directly on the plug. Never pull the cord To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray Do not attempt to clean the unit with chemical solvents as this might damage the finish. For cleaning, only use a clean, dry cloth In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure fo unplug the unt f you do not intend to use itfor an extended period of time, How to Replace the Turntable Stylus (Replacement Needle # ITNP-LC1) The stylus should last about 50 hours under normal use. However, itis recommenced that the stylus be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may damage the record. The highest speed of 78 RPM records would wear out the stylus more quickly. Removing the old stylu:

4. Set a screwdriver at the tip of the stylus and push downward (A). 2. Remove the stylus by pulling it simultaneously downward and forward. Installing a new stylus:

1, Hold the front tip of the stylus and insert its rear edge (B) first. 2. Push the stylus upwards (C) until the tip locks into place. Caution:

+ Do not bend the stylus.

+ Do not touch the needle to avoid injury your hand. t

+ Tum off the unit's power before you replace the stylus.

+ Keep out of reach of children. GuldePins (inside) GENERAL Power Requirements. AC 120\V~ 60 Hz Power Consumption OW Dimensions (WxHxD). 4.6 in x 65 in x 15.4 in (approx)

'370 x 168 x 392mm (approx) 12.1 Ibs (approx)

'3.8 kg, (approx) Weight AMPLIFIER Output Power Frequency Responsi SPEAKER SYSTEM BLUETOOTH Bluetooth Version. Bluetooth Profiles. Bluetooth Frequency range Operating Distance. 402GH2-2.480GH2 3 feet /10 meters Reker Symptom Possible Cause Solution

~ Unit will not power on. Units unplugged = Connect the unit to the AC power supply.

= No sound output from 7 The volume levels set toolow, | Adust the volume:

_, | speakers. The input selector doesnot _| Select the correct input z match the playback source. source. 2 |. Noise/Distortion in sound | The unitis too close toa TVset | Tum offthe TV or other B | output or another interfering device appliance, and relocate the unit

= Unit falls to respond. <Itmight result from extemal] - Disconnect the power factors such as ESD cord and external audio

(Electro-static discharge) device. Re-plug the power cord after one minute.

> Cannot listen to any ~The station is net tunedin = Properly tune-in the station, or signal appears | property. desired station.

| weak. +A TV setis being used nearby | Tum-off the interfering 2 and is interfering with the radio | TV set, z reception.

= [ine soundis detorted vThe antenna lend onented ]} Re-orlent ihe antenna property, until reception improves.

= Decline in turntable audio | The turntable stylus is worn out. | Replace the stylus. 2 | performance. S g

= No sound output with +The unitis not on AUX mode, | + Ensure the unit is 25 | external audio device switched to AUX mode.

=| plugged into AUX in jack

= No sound +The unitis not switchedto + Ensure the units Bluetooth mode switched to AUXBT

+Your device's and/or the unit's | mode. volume is not turned up. + Move your Bluetooth

+ Your device is too far from the | device closer to unit unit or there is some obstacle | . Turn up the volume on between your device and the | your portable device z unit. and/or the unit 5 + Tum off your Bluetooth 8 device and unit then o power them both back 3 on.

@ [-Soundis carbied Your device's and/or the units | Turn down the volume volume is not adjusted property. | on your device/phone and the unit

+ Unable To pair with @ Your device doesnt have ~ Confirm that your Bluetooth device, Bluetooth connectivity. device is Bluetooth

+ The Bluetooth pairing is not compatible. successful Pair the unit and device again. I ee CL This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected,

- Consult the dealer or an experienced radio/TV technician for help. WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The device must not be co-located or operating in conjunction with any other antenna or transmitter. Tomaintain compliance with the FCC's RF exposure guidelines, place the product at least 20cm from nearby persons. IC Stateme This device complies with RSS247 of Industry Canada. Cet appareil se conforme a RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet a ux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. The device must not be co-located or operating in conjunction with any other antenna or transmitter. apparel ne doit pas tre localize ou fonctionner avec d'autres antennes ou transmetteurs. This device complies with IC radiation exposure limits set forth for an uncontrolled environment. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC tablies pour un incontrl environnement The device should be installed and operated with a minimum distance of 20cm between the radiator and your body. L'appareil doit tre install et utilis avec une distance minimale de 20 cm entre le radiate et votre corps. per eee CRA CU A WARNING: This product can expose you to chemical including lead wich is krown tothe Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Made in China,