| submitted | available | document details (if available) | source link |
|---|---|---|---|
| March 06 2011 |
| various | Integration Guidelines | Users Manual | 351.39 KiB | March 06 2011 |
Novatel Wireless, Inc. PCI Express Mini-card Installation Guidelines for the E362 into HP laptop/notebook Devices Version 3.0 6/2/2011 1 of 18 Notice: Restricted Proprietary Information Copyright Novatel Wireless, Inc. (2011) The information contained in this document is the exclusive property of Novatel Wireless, Inc. All rights reserved. Unauthorized reproduction of this manual in any form without the expressed written approval of Novatel Wireless, Inc. is strictly prohibited. This manual may not, in whole or in part, be copied, reproduced, translated, or reduced to any electronic or magnetic storage medium without the written consent of a duly authorized officer of Novatel Wireless Inc. The information contained in this document is subject to change without notice and should not be construed as a commitment by Novatel Wireless Inc. unless such commitment is expressly given in a covering document. Novatel Wireless Inc. makes no warranties, either expressed or implied, regarding this document, its merchantability, or its fitness, for any particular purpose. Printed and produced in United States of America. 6/2/2011 2 of 18 Document Revision History Rev. Date 1.0 April 20, 2011 2.0 May 17, 2011 3.0 June 2, 2011 Todd Gallagher Todd Gallagher Brief Description of Change Originator Initial Draft based on Model HSTNN-F05C Computer Changes as outlined by the TCB review and comments. Add KDB reference section as recommended by the FCC. Todd Gallagher Approved by 6/2/2011 3 of 18 Novatel Wireless Inc. Version 3.0 FCC KDB Publication Reference KDB Title Version Date Attachment Number Version Number SAR Evaluation Considerations for Laptop/Notebook and Tablet computers Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies SAR Considerations for LTE Handsets and Data modems KDB 616217 11/13/2009 D03 V01 KDB 447498 11/13/2009 D01 V04 KDB 941225 12/15/2010 D05 V01 6/2/2011 4 of 18 Novatel Wireless Inc. E362 Module Installation and Collocation Guidelines for HP Model HSTNN-F05C Version 3.0 1.0 Introduction This document provides collocation and installation instructions for future HP laptop computers through a FCC Class I or a Class II Permissive Change based on the model HSTNN-F05C SAR data and evaluation. This process is documented in Supplement Note of FCC KDB 616217 and KDB 447498. Other configurations not specifically described in this document may be authorized in a Class I permissive changes through coordination with Novatel Wireless Inc. to verify that all technical requirements defined in Supplement Note of FCC KDB 616217 or other relevant FCC specifications are adequately addressed. The following installation host configurations are addressed in this document. 1) The E362 module can be installed as a standalone transmitter in HP notebooks meeting the following conditions:
a. Mobile notebooks where >20cm separation distance is provided between the WWAN antenna and the end user can be processed as a Class I change. The technical parameters for mobile measurements are defined in Section 2.1.1. b. Portable notebooks where 20cm separation distance is provided between the WWAN transmitting antenna that meet the technical parameters defined in Section 2.1.2. These parameters define the conservative notebook configuration used as the baseline host to evaluate SAR. 2) The E362 will allow collocated transmission through a Class I or Class II permissive change. The collocated transmitters must meet the technical requirements defined in Section 4.0. 3) Allow end-user installation provided module/notebook Two-Way Authentication has been addressed so that modules can only be activated in approved notebooks. 4) The FCC ID must be permanently affixed on the exterior of the notebook so that it cannot be separated from the host device itself. The label used must state: Contains FCC ID: PKRNVWE362-H 5) These installation guidelines are not applicable to non-notebook host devices or tablet PCs. The installation guidelines are applicable for notebook computers where the E362 and collocated antennas are located in the display portion of a notebook computer. SAR evaluation is completed with the display open at a ninety-degree angle as defined in KDB pub 616217 and Section 4 of KDB pub 447498. 6/2/2011 5 of 18 Novatel Wireless Inc. 2.0 Module Installation Guidelines Version 3.0 This section defines host installation limitations for mobile and portable hosts. (See section 3.0 for mobile and Portable definitions). 2.1 Installation Guidelines 2.1.1 Mobile Hosts (WWAN to user separation distance >20cm) The E362 module can be installed for use in any HP authenticated mobile host device as long as the antenna gain of the host antenna does not exceed the gain listed in table 1. (See section 3.0 for the measurement guidelines of separation between the transmitting antenna and the user.) The modem must not be collocated with other antennas or transmitters unless the guidelines are followed within this document. Please section 4 for collocated information. The maximum E362 conducted power and host antenna gain is listed in Table 1. Table 1 Technology Frequency (MHz) Maximum Conducted Power (dBm) Conducted Power (W) Maximum Antenna Gain LTE Band 13 (5MHZ) LTE Band 13 (5MHz) LTE Band 13 (10MHz) GPRS 1 UL CDMA2000 UMTS GPRS 1 UL CDMA2000 UMTS 779.5 784.5 782 824 824 824 1850 1850 1850 24.25 24.25 24.25 33.00 24.50 24.50 30.00 24.50 24.50 0.266 0.266 0.266 1.99 0.282 0.282 1.0 0.282 0.282
(dBi) 6.00 6.00 6.00 6.00*
6.00*
6.00*
3.00 3.00 3.00
*The maximum antenna gain may change if the device is collocated with other transmitters. Please see section 6.0 for details. 2.1.2 Portable Hosts (WWAN to user separation distance 20cm) The E362 module can be installed for use in an HP portable host device as a Class I change if the antenna separation distance is 20cm or >18.5cm. Table 2.0 describes the limitations if there are no collocated transmitters. For collocated restrictions please see section 4.0. Table 2 Portable Host Device Limitations No collocated transmitters Parameter Device type Display size WWAN Antenna locations Exterior Display Material WWAN module location Minimum WWAN to User Distance Maximum WWAN to User Distance
(Portable application) SAR evaluation required Collocated Transmitter Condition Requirement Notebook Any Display
(Non metal) Anywhere 18.5cm 20cm No Restricted. RF Exposure Justification Section 3.0 Section 3.0 Section 4.0 6/2/2011 6 of 18 Novatel Wireless Inc. 2.1.3 Portable Hosts (WWAN to user separation distance 18.5cm) Version 3.0 The E362 module can be installed for use in an HP portable host device as a Class II change if the antenna separation distance from the user is 18.5cm. Table 2.0 describes the limitations if there are no collocated transmitters. Collocated radios must be considered as per KDB 616217 supplemental note and section 3 of KDB 447498. This section does not apply to tablets or non-
notebook devices. Table 3 Portable Host Device Limitations No collocated transmitters Parameter Device type Display size WWAN Antenna locations Exterior Display Material WWAN module location Maximum WWAN to User Distance SAR evaluation required Collocated Transmitter Condition Based on Model HSTNN-F05C platform 2.1.4 End User Installation Requirement Notebook Any Display
(Non metal) Anywhere 18.5cm Yes KDB 616217 (supplemental) KDB 447498 section 3. RF Exposure Justification Section 3.0 Two-way authentication documentation has been submitted as part of a Class II permissive change allowing end-user installation into notebooks that utilize the method of authentication. Authentication occurs in two methods:
Software installed on the modem:
Installation Software including list of pre-approved Notebooks and Modules. 1. 2. PID/VID identification numbers in Module: Factory Installed 3. Module identification numbers in Notebook: Factory Installed Implementation When a Module Upgrade Kit is procured the module is available for End-User installation in approved Notebook computers. The connection manager software is run on the Notebook and the Module ID numbers are checked against a pre-determined list of approved ID numbers in the installation software. Both the Notebook and the Module are checked. If either ID does not match, the installation of the Driver is halted and the Module will not work. Moving the Module to other NON approved notebooks will not allow the module to operate. Since the driver will ONLY operate in pre-approved Notebooks with the proper ID and while a properly ID-checked Module is resident, you can not load the driver for NON-approved Modules or Notebooks. 6/2/2011 7 of 18 Novatel Wireless Inc. 2.1.5 Instructions provided to the user Version 3.0 Instructions provided to the end user must contain information to satisfy FCC RF exposure requirements for Mobile or portable devices. 6/2/2011 8 of 18 Novatel Wireless Inc. Version 3.0 3.0 Individual SAR Evaluation Portable RF exposure evaluation has been completed based on SAR measurements on the HSTNN-F05C notebook computer that provided 18.5 cm of separation distance between the edge of the WWAN antenna and the end user orientated at 90 degrees as illustrated in Figure 1. The measured SAR value was 0.347W/kg. As indicated in KDB 447498 section 2 a), i) when SAR values are <0.4W/kg for a conservative exposure measurement there are no restrictions on host platforms with antenna separations greater than the HSTNN-F05C. Please refer to section 4.0 for collocation guidelines. Figure 1-1 Model HSTNN-F05C Portable Antenna Location 18.5cm Mobile Device Definition A transmitting antenna is located at a distance greater than 20cm from the user. Portable Device Definition - A transmitting antenna is located at a distance 20cm from the user. 6/2/2011 9 of 18 Novatel Wireless Inc. 4.0 Collocated Installation Guidelines 4.1 Collocated transmitter application Version 3.0 Collocated transmitters can be operated simultaneously with the E362 module, provided the technical parameters listed in Table 4 are maintained and the information specified in Section 5.0 is on file as part of a Class I permissive change. A Class II permissive change is required if the host device does not meet the requirements specified in Table 4 and in section 6. Table 4 Host Device Limitations Collocated transmitters Parameter Device type Display size WWAN Antenna locations Exterior Display Material WWAN module location Minimum WWAN to User Distance Maximum WWAN SAR Maximum RF coaxial cable loss Mobile Collocated Transmitter Condition
(Mixed mobile and WWAN portable) Portable Collocated Transmitter Condition Requirement Notebook Any Display
(Non metal) Anywhere 18.5cm 0.347W/kg (1g)*
0.75dBi*
<0.783 W/kg (1g) RF Exposure Justification Section 3.0 Section 3.0 Section 6.5 and 6.6 Section 6.4 or Section 6.6 SAR < 1.253W/kg (1g) TBD based on conducted power and maximum MPE Mobile Collocated antenna gain (mobile WWAN) Mobile Collocated antenna gain (Portable WWAN) Distance to external card slots Based on Model HSTNN-F05C platform
*Based on Model HSTNN-F05C platform Other devices may be approved as collocated transmitters, provided the technical requirements of KDB 616217 are satisfied. Section 6.1 N/A 5 dBi
>5cm Section 6.5 6/2/2011 10 of 18 Novatel Wireless Inc. 5.0 Class I Permissive Change Documentation Requirements Version 3.0 The following documentation from KDB pub 616217 must be kept on file to account for simultaneous transmission as part of a Class I permissive change. A Class II permissive change is required if the technical requirements cannot be met. 1. List of all collocated transmitters with FCC and IC IDs 2. Verification that all WWAN and WLAN antennas are >5cm from external USB, PCMCIA or other notebook I/O ports that support an external plug-in transmitter. 3. Drawings showing antenna locations and separation distances 4. Antenna types with respective dimensions and far field antenna gains 5. Specific module to antenna RF coaxial cable losses 6. RF exposure analyses demonstrating compliance with Section 4 of KDB 616217 as shown below 6/2/2011 11 of 18 Novatel Wireless Inc. 6.0 Simultaneous RF Exposure Evaluation Guidelines For Collocated Transmitters Allowable through a Class I Version 3.0 Permissive change 6.1 Mobile Simultaneous Transmission guidelines Collocated transmitters can be operated simultaneously with the E362 module in mobile configurations, provided the technical parameters listed in KDB pub 447498 section 8 are met. These procedures apply to antennas in the display screen for laptop devices. These parameters are:
a) Transmitters and modules certified for mobile or portable exposure conditions and categorically excluded by 2.1091(c) can be incorporated in mobile host devices without further testing or certification when:
i. The closest separation among all simultaneous (radiating) transmitting antennas is 20cm, or ii. The antenna separation distance and MPE compliance boundary requirements that enable all simultaneous transmitting antennas incorporated within the host to comply with MPE limits are specified in the application filing of at least one of the certified transmitters incorporated in the host device. In addition, when transmitters certified for portable use are incorporated in a mobile host device the antenna(s) must be 5 cm from all other simultaneous transmitting antennas. b) All transmitters in the final product must be at least 20cm from users and nearby persons. For antenna distance instructions please see section 4.0. 6.2 Mobile Hosts calculations through power density calculations The power density calculations for standalone transmitters at an exposure separation distance of 20 cm are shown in table 5 with the declared transmit power and antenna gain values. The calculations are based on a cable loss of 0 dBi. The collocated transmitter values represent worst-case transmit power and antenna gains allowable for use with the E362 WWAN module. For frequency dependent limits, the lowest transmitter frequency was used to represent the lowest MPE limit (e.g. 779.5MHz = 0.519 mW/cm2). The WLAN power levels listed represent the worst-case values for the corresponding frequency ranges. Per OET 65, when RF sources have different frequencies, the fraction of the FCC power density limit shall be determined and the sum of all fractional components shall be less than 1. The fractional MPE calculation is also addressed in Supplement Note 1 of FCC KDB 616217
(Simultaneous Transmission Considerations). 6/2/2011 12 of 18 Novatel Wireless Inc. Table 5 WWAN and WLAN Standalone MPE Calculations Version 3.0 Technology Frequency
(MHz) Maximum Conducted Maximum Antenna Conducted Power (W) Duty Cycle Average EIRP
(dBm) Average EIRP
(W) Power Density @
20cm
(mW/cm^2) FCC MPE Limit
(mW/cm^2) Power
(dBm) 24.25 24.50 33.00 24.50 24.50 30.00 24.50 29.00 29.00 29.00 29.00 29.00 29.00 780 824 824 824 1850 1850 1850 2400 5150 5250 5500 5800 2600 LTE CDMA GPRS UMTS CDMA GPRS UMTS WLAN WLAN WLAN WLAN WLAN WIMAX 0.211 0.141 0.249 0.141 0.112 0.099 0.112 0.500 0.500 0.500 0.500 0.500 0.500
*The maximum antenna gain has been reduced to compensate for the collocated transmitters. 1.060 0.708 1.252 0.708 0.563 0.499 0.563 2.51 2.51 2.51 2.51 2.51 2.51 0.266 0.282 1.995 0.282 0.282 1.00 0.282 0.794 0.794 0.794 0.794 0.794 0.794 30.3 28.5 31.00 28.5 27.5 20.0 20.5 34.00 34.00 34.00 34.00 34.00 34.00 1.00 1.00 0.25 1.00 1.00 0.25 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Table 6 WWAN 700 MHz Collocation Power Density Gain
(dBi) 6.00 4.00*
4.00*
4.00*
3.00 3.00 3.00 5.00 5.00 5.00 5.00 5.00 5.00 0.519 0.519 0.519 0.519 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 WLAN Band WLAN Pd
(mW/cm^2) FCC MPE Limit
(mW/cm^2) 0.500 0.500 0.500 0.500 0.500 0.500 1.000 1.000 1.000 1.000 1.000 1.000 2.4 GHz 5.1 GHz 5.2 GHz 5.5 GHz 5.8 GHz 2.6 GHz
(WLAN Pd) /
(MPE Limit) 0.500 0.500 0.500 0.500 0.500 0.500 700 MHz WWAN Pd
(mW/cm^2) FCC MPE Limit
(mW/cm^2) 0.211 0.211 0.211 0.211 0.211 0.211 0.519 0.519 0.519 0.519 0.519 0.519
(WWAN 700 MHz) /
MPE Limit) 0.407 0.407 0.407 0.407 0.407 0.407
(700 MHz WWAN fraction)
(WLAN fraction) 0.907 0.907 0.907 0.907 0.907 0.907 Table 7 WWAN 850 MHz Collocation Power Density WLAN Band WLAN Pd
(mW/cm^2) FCC MPE Limit
(mW/cm^2) 2.4 GHz 5.1 GHz 5.2 GHz 5.5 GHz 5.8 GHz 2.6 GHz 0.500 0.500 0.500 0.500 0.500 0.500 1.000 1.000 1.000 1.000 1.000 1.000
(WLAN Pd) /
(MPE Limit) 0.500 0.500 0.500 0.500 0.500 0.500 850 MHz WWAN Pd
(mW/cm^2) 0.249 0.249 0.249 0.249 0.249 0.249 FCC MPE Limit
(mW/cm^2) 0.519 0.519 0.519 0.519 0.519 0.519
(WWAN 850 MHz) /
MPE Limit) 0.480 0.480 0.480 0.480 0.480 0.480
(850 MHz WWAN fraction)
(WLAN fraction) 0.980 0.980 0.980 0.980 0.980 0.980 Limit Pass/Fail 1 1 1 1 1 1 Pass Pass Pass Pass Pass Pass Limit Pass/Fail 1 1 1 1 1 1 Pass Pass Pass Pass Pass Pass 6/2/2011 13 of 18 Novatel Wireless Inc. Table 8 WWAN 1900 MHz Collocation Power Density Band WLAN Pd
(mW/cm^2) FCC MPE Limit
(mW/cm^2) 2.4 GHz 5.1 GHz 5.2 GHz 5.5 GHz 5.8 GHz 2.6 GHz 0.500 0.500 0.500 0.500 0.500 0.500 1.000 1.000 1.000 1.000 1.000 1.000
(WLAN Pd) /
(MPE Limit) 0.500 0.500 0.500 0.500 0.500 0.500 1900 MHz Pd FCC MPE Limit
(mW/cm^2)
(mW/cm^2) 0.112 0.112 0.112 0.112 0.112 0.112 1.000 1.000 1.000 1.000 1.000 1.000
(WWAN 1900 MHz) /
MPE Limit) 0.112 0.112 0.112 0.112 0.112 0.112
(1900 MHz WWAN fraction)
(WLAN fraction) 0.612 0.612 0.612 0.612 0.612 0.612 Version 3.0 Limit Pass/Fail 1 1 1 1 1 1 Pass Pass Pass Pass Pass Pass 6.3 Portable Simultaneous Transmission guidelines Collocated transmitters can be operated simultaneously with the E362 module in portable configurations, provided the technical parameters listed in KDB pub 447498 section 3 are met. These procedures apply to antennas in the display screen for laptop devices. These parameters are:
Transmitters and modules for use in portable exposure conditions that allow simultaneous transmission:
a) Except during network hand-offs where the maximum hand-off duration is less than 30 seconds, simultaneous transmission applies when there is overlapping transmission. SAR is evaluated for simultaneous transmission using volume scan measurements. b) SAR is not required for the following simultaneous transmission conditions i) When excluded by the procedures in KDB 616217 or KDB 648474. ii) When specific requirements for simultaneous transmission SAR evaluation have not been established for the host platform or device configuration:
(1) for the antennas that are located < 5 cm from persons, where
(a) The closest antenna separation distance is 5 cm for all simultaneous transmitting antennas within the host or device; and
(b) The sum of the 1-g SAR is < 1.6 W/kg for all simultaneous transmitting antennas that require stand-alone SAR evaluation or the SAR to peak location separation ratios are < 0.3 for all simultaneous transmitting antenna pairs; and
(c) The output power is 60/f(GHz) mW for any simultaneous transmitting antenna(s) for which stand-alone SAR evaluation is not required.
(2) for the antennas that are located 5 cm from persons, contact the FCC Laboratory to determine if the simultaneous transmission SAR exclusion procedures for laptop/notebook/netbook computers in KDB 616217 and its supplement may be applied.19 c) The operating and installation requirements, including restrictions, must be provided for OEM integrators and end users to comply with simultaneous transmission SAR requirements. 6/2/2011 14 of 18 Novatel Wireless Inc. Version 3.0 6.4 Portable Hosts: Sum of Total SAR < SAR Limit A portable collocated transmitter can be operated simultaneously with the WWAN transmitter provided the individual SAR results for the portable collocated transmitter are less than the value specified below based on Section 4)a) of the Supp note for KDB 616217. The maximum individual SAR value is based on the worst case SAR recorded on the HSTNN-F05C notebook computer at 18.5cm (0.347 W/kg). SARcollocated SARcollocated
.06.1
.1 253 kgW 347
kgW
6.5 Portable Hosts Sum of WWAN SAR + Collocated MPE <1
(Mobile Collocated transmitter with a portable transmitter) For mobile collocated transmitters operating greater than 1 GHz, mobile collocated transmitter can be operated simultaneously with the portable WWAN transmitter, provided the individual MPE results for the mobile collocated transmitter are less than the value specified below based on Section 4)a) of the Supp note for KDB 616217. The maximum individual SAR value is based on the worst case SAR recorded on the HSTNN-F05C notebook computer at 18.5cm (0.345 W/kg). MPEcollocated 1 SARWWAN 1.6 MPEcollocated kgW
.0 783 6/2/2011 15 of 18 Novatel Wireless Inc. Version 3.0 6.6 Portable Hosts Max Collocated SAR Vs. Distance If the summation of SAR exceeds the FCC limit, collocation is permitted through a Class I permissive change provided the minimum allowable separation distance derived from the equation below is satisfied. An alternate equation provides the maximum collocated SAR based on a specified separation distance. In addition, the sum of the highest MPE must be less than the corresponding MPE limit as defined in section 4. B) ii) of the Supplemental note of KDB 616217. Minimum separation distance for Collocated Transmitters 5 ([SARWWAN + SARcollocated 1.6
]1.5) Ant _ SeparationWWAN toCollocated Maximum collocated SAR vs distance 5 ([SARWWAN + SARcollocated 1.6
]1.5) Ant _ SeparationWWAN toCollocated SARcollocated =1.6 (SeparationWWAN toCollocated 2 3 SARWWAN
) 1.5 6/2/2011 16 of 18 Novatel Wireless Inc. Version 3.0 7.0 Regulatory Statements - Federal Communications Commission Notice (FCCUnited States) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Contact your service provider for help. Notice to Consumers: Changes or modifications made to this equipment not expressly approved by Novatel Wireless may void the FCC authorization to operate this equipment. This device complies with Part 15 of the FCC Rules and with Industry Canada ICES-003. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. The E362 is compliant to the relevant sections of the FCC rules:
FCC CFR47 Part 2 (General Rules and Regulations, RF Exposure Evaluation) FCC CFR47 Part 15 (All Radio Frequency Devices) FCC CFR47 Part 24 (Narrow and wideband PCS modules) FCC CFR47 Part 22 (Cellular Service) FCCCFR47 Part 27 (Wireless Communications Services) 6/2/2011 17 of 18 Novatel Wireless Inc. Version 3.0 8.0 Technical Support Contacts 6/2/2011 WWW: http://www.nvtl.com/support/index.html Email: support@novatelwireless.com 18 of 18
This product uses the FCC Data API but is not endorsed or certified by the FCC