8260D2W
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
5785 5745 5825 5785 5745 5775 5795 5755 5825 5785 5745 5825 5785 5745 5825 5785 5745 5775 5795 5755 5825
-0.06
-3.10
-0.56
-0.09
-2.67
-0.64
-3.97
-1.09
-0.10
-3.98
-1.43
-0.02
-1.46
-4.89
-1.14
-2.47
-0.41
-5.58 20.51 20.43 21.04 20.73 20.33 20.76 21.14 20.95 20.73 20.78 20.66 20.57 20.66 20.69 23.44 20.48 23.50 20.17 16.42 23.27 23.06 19.22 23.62 23.69 20.64 23.78 20.84 17.32 23.51 15.87 22.78 19.01 23.42 19.28 16.09 23.25 21.55 19.59 22.64 22.48 20.77 22.58 18.54 16.45 22.52 22.18 19.67 23.61 23.69 20.64 23.71 21.88 18.44 23.34 21.08 21.15 20.53 20.64 20.71 20.65 25.90 19.17 25.70 14.95 22.41 18.05 23.55 21.04 15.51 23.51 23.22 20.08 23.63 C2PC SISO A Deviation Orgianal Peak Avg Peak 802.11a Peak Avg Avg Avg Peak 802.11n20 Peak Avg Avg Peak Peak 802.11n40 Peak Avg Avg Peak Avg 802.11ac80 Avg Avg Avg Peak 802.11a Avg Peak Avg Avg Peak Peak 802.11n20 Peak Avg Avg Peak Avg SISO B Peak 802.11n40 Peak Avg Avg Peak Avg 802.11ac80 Avg Avg Avg Avg Peak Peak 802.11n20 Avg Peak Avg MIMO Peak Avg Peak 802.11n40 Peak Avg Avg Avg 802.11ac80 Avg Avg Peak Avg Peak 802.11n20 Peak Avg Avg Beamforming Peak Avg Peak Peak 802.11n40 Avg Avg Avg 802.11ac80 Avg Avg Note 1: The purpose of this table is to show there is no power changes from original to C2PC while moving the 5.8 GHz data from 15.247 to UNII rules and using the newer techniques for the UNII data. This table is necessary given the different techniques that have been used/allowed under the 15.247 vs. UNII rules. Note 2: The Peak in the C2PC column is using the 15.247 method originally applied, but is not a current method allowed under UNII. It is shown here only for purposes of proving there is no intentional change to power. The Peak values shown under C2PC should not be used in final data as the method is not specified by the KDB. Note 3: The Average value under the C2PC is using a selected method now required by the UNII test procedures and is the value intended to be placed on the grant. Please highlight the values used in the test report. Show the difference from the test report +/- deviation. Note 4: Highest power as shown on the original grant is highlighted. 23.67 20.85 25.78 25.70 22.17 25.66 25.70 17.52 22.33 25.70 20.09 24.84 17.98 25.70 18.75 23.33 22.27 21.15 21.12 23.55 20.96 25.70 20.26 24.55 25.70 17.61 22.45 25.70 19.79 24.11 17.58 21.33 21.33 21.37 23.63 25.70 20.88 25.40 20.85
-5.57
-2.03
-0.12
-0.04
-3.37
-0.86
-2.37
-6.05
-1.15
-3.25
-1.59
-0.30 5755 5795 5775 5745 5825 5755 5795 5775 5785
--
--
--
--
--
--
--
--
--
--