Intel Wi-Fi 6E AX211 Users Manual

 

Intel® WiFi Adapter Information Guide

This version of Intel® PROSet/Wireless WiFi Software is compatible with the adapters listed below. Note that newer

features provided in this software are generally not supported on older generations of wireless adapters.

The following adapters are supported in Windows* 10:

Intel® Wi-Fi 6E AX211

Intel® Wi-Fi 6E AX210

Intel® Wi-Fi 6 AX203

Intel® Wi-Fi 6 AX201

Intel® Wi-Fi 6 AX200

Intel® Wi-Fi 6 AX101 I

With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet

connection. All these features can be explored using a WiFi network in your home or office. This WiFi network

solution is designed for both home and business use. Additional users and features can be added as your networking

needs grow and change.

This guide contains basic information about Intel adapters. Intel® wireless adapters enable fast connectivity without

wires for desktop and notebook PCs.

Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g,

802.11n, 802.11ac and 802.11ax wireless standards. Operating at 2.4GHz, 5GHz or 6GHz frequency, you can now

connect your computer to existing high-speed networks that use multiple access points within large or small

environments. Your WiFi adapter maintains automatic data rate control according to the access point location and

signal strength to achieve the fastest possible connection.

Information in this document is subject to change without notice.

Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any

commitment to update the information contained herein.

IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:

Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all

necessary local and governmental regulatory agency requirements for the regions that they are designated and/or

marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars,

satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and

limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove

regional and local compliance to regional and governmental regulations before certification or approval to use the

product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control

parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include,

without limitation, RF power, spectrum usage, channel scanning, and human exposure.

For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format

with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or

code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches,

utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be

solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any

theory of liability for any issues associated with the modified products, including without limitation, claims under the

warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist

in providing support to any third parties for such modified products.

Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

© Intel Corporation.

Regulatory Information

This section provides regulatory information for the following wireless adapters:

Intel® Wi-Fi 6 AX200

Intel® Wi-Fi 6 AX201

Intel® Wi-Fi 6 AX203

Intel® Wi-Fi 6E AX210

Intel® Wi-Fi 6E AX211

The following information is provided:

Information for the User

Regulatory Information

Regulatory ID

Information for OEMs and Host Integrators

NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above.

NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and

similar standards), the information provided herein is subject to change. Intel Corporation assumes no

responsibility for errors or omissions in this document.

INFORMATION FOR THE USER

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps

or in an explosive environment unless the transmitter has been modified to be qualified for such use

Warning: The wireless adapter is not designed for use with high-gain directional antennas.

Use On Aircraft Caution

Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic

devices equipped with radio frequency devices (wireless adapters) because their signals could interfere with

critical aircraft instruments.

Caution: This device is prohibited against use for the control of or communications with unmanned aircraft

systems, including drones

Safety Approval Considerations

This device has been safety approved as a component and is for use only in complete equipment where the

acceptability of the combination is determined by the appropriate safety agencies. When installed, consideration

must be given to the following:

- The use of wireless adapters in hazardous locations is limited by the constraints posed by the

safety directors of such environments.

- The use of wireless adapters on airplanes is governed by the Federal Aviation Administration

(FAA).

- The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.

USA FCC Radio Frequency Exposure

The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF)

electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure

requirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217.

Proper operation of this radio according to the instructions found in this manual will result in exposure substantially

below the FCC’s recommended limits.

The following safety precautions should be observed:

- Do not touch or move antenna while the unit is transmitting or receiving.

- Do not hold any component containing the radio such that the antenna is very close or touching any exposed

parts of the body, especially the face or eyes, while transmitting.

- Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may

cause damage to the radio.

- Use in specific environments:

REGULATORY INFORMATION

USA - Federal Communications Commission (FCC)

This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHz

frequency ranges. No configuration controls are provided for Intel® wireless adapters allowing any change in the

frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC

rules.

- Intel® wireless adapters are intended for installation by OEM integrators only.

- Intel® wireless adapters cannot be co-located with any other transmitter unless without further

- Intel® wireless adapters must be used with the same type of antenna with equal or less maximum

evaluation and acceptance by the FCC.

gains from the original approval.

- No trace antenna designs permitted without additional evaluation and FCC approval.

- Intel® wireless adapters are single modular approvals with no limited module conditions specified.

This wireless adapter complies with Part 15.247 and 15.407 of the FCC Rules. Operation of the device is subject to

the following two conditions:

- This device may not cause harmful interference.

- This device must accept any interference that may cause undesired

operation.

Class B Device Interference Statement

This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless

adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful

interference to radio communications. There is no guarantee, however, that such interference will not occur in a

particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which

can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by

taking one or more of the following measures:

- Reorient or relocate the receiving antenna of the equipment experiencing the interference.

- Increase the distance between the wireless adapter and the equipment experiencing the interference. -

Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the

equipment experiencing the interference is connected.

- onsult the dealer or an experienced radio/TV technician for help.

NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions

as described in the user documentation that comes with the product. Any other installation or use will

violate FCC Part 15 regulations.

Modular Regulatory Certification Country Markings

Due to the very small size of the AX200D2WL, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

Intel® Wi-Fi 6 AX200 (AX200NGW)

USA: Model AX200NGW, FCC ID: PD9AX200NG

Canada: Model AX200NGW, IC: 1000M-AX200NG

Intel® Wi-Fi 6 AX200 (AX200D2WL)

USA: Model AX200D2WL, FCC ID: PD9AX200D2L

Canada: Model AX200D2WL, IC: 1000M-AX200D2L

Intel® Wi-Fi 6 AX201 (AX201NGW)

USA: Model AX201NGW FCC ID: PD9AX201NG

Canada: Model AX201NGW, IC: 1000M-AX201NG

Intel® Wi-Fi 6 AX201 (AX201D2W)

USA: Model AX210D2W FCC ID: PD9AX210D2

Canada: Model AX210D2W IC: 1000M-AX210D2

Intel® Wi-Fi 6 AX201 (AX201D2WL)

USA: Model AX201D2WL, FCC ID: PD9AX201D2L

Canada: Model AX201D2WL, IC: 1000M-AX201D2L

Intel® Wi-Fi 6 AX203 (AX203NGW)

USA: Model AX203NGW, FCC ID: PD9AX203NG

Canada: Model AX203NG, IC: 1000M-AX203NG

Intel® Wi-Fi 6 AX203 (AX203D2W)

USA: Model AX203D2W, FCC ID: PD9AX203ND2

Canada: Model AX203D2W, IC: 1000M-AX203D2

Due to the very small size of the AX201D2W, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

Due to the very small size of the AX201D2WL, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

Due to the very small size of the AX203NGW, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

Due to the very small size of the AX203D2W, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

Intel® Wi-Fi 6E AX210 (AX210NGW)

FCC ID: PD9AX210NG

IC: 1000M-AX210NG

Intel® Wi-Fi 6E AX210 (AX210D2W)

Intel® Wi-Fi 6E AX211 (AX211NGW)

FCC ID: PD9AX211NG

IC: 1000M-AX211NG

Intel® Wi-Fi 6E AX211 (AX211D2W)

Due to the very small size of the AX210D2W, the marking has been placed in this user manual because the

product label on the device is considered too small to be readable.

USA: Model AX210D2W, FCC ID: PD9AX210D2

Canada: Model AX210D2W, IC: 1000M-AX210D2

Due to the very small size of the AX211D2W, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

USA: Model AX211D2W, FCC ID: PD9AX211D2

Canada: Model AX211D2W, IC: 1000M-AX211D2

Intel® Wi-Fi 6E AX211 (AX211D2WL)

Due to the very small size of the AX211D2WL, the marking has been placed in this user manual because the product

label on the device is considered too small to be readable.

FCC ID: PD9AX211D2L

IC: 1000M-AX211D2L

INFORMATION FOR OEMs and HOST INTEGRATORS

The guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters in

notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of

compliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described herein

are fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with no

further restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM or

integrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible to

determine the required host regulatory testing and/or obtaining the required host approvals for compliance.

- Intel® wireless adapters are intended for installation by OEMs and host integrators only.

- The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.

-The Intel® wireless adapters must be operated with an access point that has been approved for the country

of operation.

-Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is not

permitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties

will void authorization to operate the adapter.

Antenna Type and Gains

Only antennas of the same type and with equal or less gains as shown in the tables below shall be used with the

Intel® wireless adapters. Other types of antennas and/or higher gain antennas may require additional

authorization for operation. For testing purposes the following dual band antenna that approximates closely the

above limits was used:

Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated or

Plug-In Transmitters

Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices

installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary

application and test requirements. OEM integrators must identify all possible combinations of simultaneous

transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters

installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from

user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment

to determine if any additional requirements for testing or FCC approval is necessary.a

Antenna Placement Within the Host Platform

To ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed in

notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating

modes and orientations of the host platform, with strict adherence to the table below. The antenna separation

distance applies to both horizontal and vertical orientation of the antenna when installed in the host system.

Any separation distances less than those shown will require additional evaluation and FCC authorization.

For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmitting

antennas be provided within the host system to maintain an adequate separation ratio for simultaneous WiFi and

Bluetooth transmission. For less than 5 cm separation the separation ratio must be verified according to FCC

publication KDB 447498 for the specific adapter.

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps

or in an explosive environment unless the transmitter has been modified to be qualified for such use.

Antenna Warnings: The wireless adapter is not designed for use with high-gain directional antennas.

Use On Aircraft Caution

Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic

devices equipped with radio-frequency wireless devices (wireless adapters) because their signals could interfere with

critical aircraft instruments.

Caution: This device is prohibited against use for the control of or communications with unmanned

aircraft systems, including drones

Information To Be Supplied to the End User by the OEM or Integrator

The following regulatory and safety notices must be published in documentation supplied to the end user of the

product or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must

be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.

The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as

described in the user documentation that comes with the product. Intel Corporation is not responsible for any radio

or television interference caused by unauthorized modification of the devices included with the wireless adapter kit

or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation.

The correction of interference caused by such unauthorized modification, substitution or attachment is the

responsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage or

violation of government regulations that may arise from the user failing to comply with these guidelines.

Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage

The following statement on local restrictions must be published as part of the compliance documentation for all

802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products.

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad wireless

LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are

designed for use only in specific countries, and are not allowed to be operated in countries other than those of

designated use. As a user of these products, you are responsible for ensuring that the products are used only in the

countries for which they were intended and for verifying that they are configured with the correct selection of

frequency and channel for the country of use. Any deviation from permissible settings and restrictions in the

country of use could be an infringement of national law and may be punished as such.