| submitted | available | document details (if available) | source link |
|---|---|---|---|
| July 11 2019 | July 11 2019 | G6-300 Installation Guide Invenco Group Ltd pdfTeX-1.40.20 |
| various | User Manual | Users Manual | 3.21 MiB | July 11 2019 |
G6-300 Installation Guide DCV-00477 S2 R03 Nov 04 2019 S2 Security Level Guide No restrictions apply: customer-facing document. Contents 1 Introduction 1.1 Where Can the G6-300 be Installed? . 2 Safety & Compliance Information 2.1 Preliminary Precautions . 3 Safely Accessing a Fuel Pump 3.1 Evacuation and Barricading . 3.2 Total Electrical Shut-Off . 4 Read the Manual 5 Follow the Regulations 6 Replacement Parts 7 Safety Symbols and Warning Words 8 Prevent Explosions and Fires 8.1 No Open Flames . 8.2 No Sparks - No Smoking . 1 1 2 2 3 3 3 4 5 6 7 8 8 8 9 Working Alone 10 9.1 Best Practice . 10 9.2 Safety First!
. 10 10 Safety First: Working with Electricity 11 Hazardous Materials 12 Informing Emergency Personnel 13 Computer Programs and Documentation 11 12 13 14 14 Approvals 15 14.1 European Directives . 15 14.2 FCC . 16 15 Product Features 17 15.1 Location of Features . 17 16 Accessories in the box DCV-00477 S2 R03 19 i 17 Location of Mounting Points 21 18 Installation 22 18.1 Installing a Brand New OPT . 22 19 Tools Required to Mount the G6-300 20 Installing Into a New Pump or Cabinet 21 Upgrading an Existing Invenco Outdoor Payment Terminal 22 Power Supply Considerations 23 Wiring 24 Protective Earth 25 Ethernet LAN 26 DC Power Supply 27 Main Power Supply Wiring 28 Wiring Completion 29 First Power-Up 30 Standard Screens 26 27 29 30 31 32 33 34 35 36 37 38 31 Basic Maintenance 41 31.1 Cleaning . 41 32 How to Load Paper 33 Clearing a Paper Jam 42 44 34 Security Checks 46 34.1 Built in Security . 46 34.2 Extra Security Checks . 46 35 Inspection 47 35.1 Key Pad . 47
. 48 35.2 Card-Reader Slot and Contactless Reader 36 Escalation 53 37 Removal & Reinstallation 54 37.1 How to Uninstall a G6-300 . 54 37.2 How to Reinstall a G6-300 . 55 38 Drawings 56 38.1 Dimensions . 56 39 Mounting New Installation 40 Typical Wiring 41 Release History DCV-00477 S2 R03 59 61 63 ii CHAPTER 1 Introduction The G6-300 combines the latest technology with streamlined user-experience, to provide targeted marketing opportunities that produce both increased revenue and happy customers. We love it and we know you will too!
The G6-300 is designed to be durable and tough, yet simple and secure to use. To get the best use out of your G6-300, make sure that it is installed correctly and properly maintained. This guide will walk you through installation and correct care for your new Outdoor Payment Terminal
(OPT). If you are installing an OPT using an approved retrot kit, the instructions with the kit supercede Note:
the instructions in this guide. 1.1 Where Can the G6-300 be Installed?
The G6-300 is a multi-purpose Outdoor Payment Terminal (OPT) designed for unattended use. It operates in a range of outdoor environments in temperatures from -20C (-4 F) through to +70C (158 F) It has been primarily designed for fuel station forecourts, but can be installed into any physically secure cabinet. This makes it ideal for golf courses, car washes, drive-throughs, sun, sand or snow - anywhere you want people to pay you but you dont want to pay someone to stand there and wait to take payments!
Because its usually used in fuel stations, this guide explains the requirements for mounting it into a fuel pump-head, however the steps are applicable to any cabinet. Specic steps and precautions for pump head installation are highlighted, because we care about you -
our customers - and your safety. Please, always use safety precautions when installing our products. DCV-00477 S2 R03 1 CHAPTER 2 Safety & Compliance Information STOP There are hazards and safety precautions associated with installing, inspecting, maintaining or servicing this product. Important: Before you start, READ! You need to understand the safety information in this manual. Hazards and safety precautions for tasks are always listed. Fire, explosion or electrical shock could occur and cause death or serious injury if these safe service procedures are not followed. 2.1 Preliminary Precautions Fuel stations can be a dangerous place to work - there are ammable fuels, vapours and high voltages. You should only install, inspect, maintain or service this equipment when you are fully trained and authorized to do so. DCV-00477 S2 R03 2 CHAPTER 3 Safely Accessing a Fuel Pump 3.1 Evacuation and Barricading If you need to access a pump/dispenser head, then you must:
Evacuate all unauthorized persons and vehicles. Use safety tape or cones as a barricade to the affected unit(s). 3.2 Total Electrical Shut-Off Before accessing the electrical components or the electronics of a pump/dispenser, you must carry out a total electrical shut-off of that unit. To shut off electricity nd the switch or circuit breaker and turn it to the off position. If you cant turn off the power, STOP. Do not continue until the electricity has been safely turned off by you or someone else. DCV-00477 S2 R03 3 CHAPTER 4 Read the Manual Read, understand and follow this manual and any other labels or related materials supplied with this equipment. If you do not understand a procedure, call an Invenco authorized service contractor. Warning: For your own safety and that of others, you must understand the procedures before beginning work. DCV-00477 S2 R03 4 CHAPTER 5 Follow the Regulations Regulations exist to keep everyone safe. You are expected to follow:
OSH regulations. National regulations and codes. State regulations and codes. Local regulations and codes. Note:
If you do not install, inspect, maintain or service this equipment in accordance with these codes, regulations and standards, it may affect the safe use and operation of the equipment, or lead to legal citations with penalties. DCV-00477 S2 R03 5 CHAPTER 6 Replacement Parts Use only genuine Invenco replacement parts and retrot kits on your installation. Using parts other than genuine Invenco replacement parts could create a safety hazard and violate local regulations. DCV-00477 S2 R03 6 CHAPTER 7 Safety Symbols and Warning Words Throughout this guide you will see warnings and notes in boxes like below. These are used to let you know when you need to take extra caution in order to avoid hazards and/or potential injury to yourself or another person. Always follow these instructions!
Warning: This alerts you to a hazard or unsafe practice that could result in death or serious injury. Note: This designates a hazard or unsafe practice which may result in minor injury or a legal issue. DCV-00477 S2 R03 7 CHAPTER 8 Prevent Explosions and Fires Fuels and their vapours will become explosive if ignited. All fuels cause vapours when they are exposed to air and transferred between containers; spilled or leaking fuels cause even more vapours. When a customers tank is lled, vapours leak into the air around the tank and island, and these vapours can potentially catch re or explode if they are exposed to a spark or ame. This is why every single person on a fuel station forecourt must be aware of the danger of sparks and open ames and take precautions to avoid explosions and res. 8.1 No Open Flames Open ames from matches, lighters, welding torches or other sources can ignite the fuel and vapours present on forecourts. There should never be an open ame on a fuel station forecourt for any reason. 8.2 No Sparks - No Smoking Sparks can also start a re or cause an explosion on a forecourt. Be safety conscious!
Do not:
1. Smoke. 2. Light a match. 3. Use a lighter. 4. Use a mobile phone outside of your car. 5. Start or use power tools. 6. Create a ame of any kind. Also beware of:
1. Static electricity. DCV-00477 S2 R03 8 G6-300 Installation Guide, DCV-00477 S2 R03 Always touch the metal of your vehicle after you get out of it to discharge any electrostatic charge before you approach the dispenser island. Chapter 8. Prevent Explosions and Fires 9 CHAPTER 9 Working Alone 9.1 Best Practice Always work with at least two people if possible; one to actively work and one as an assistant/backup. Ideally if you are working around high voltages, the backup/assistant should be trained in providing Cardiopulmonary Resuscitation (CPR). 9.2 Safety First!
Whether working alone or with someone else:
1. Advise station personnel where you will be working. 2. Warn station personnel not to turn the power back on while you are working on the equipment. 3. Use the OSH tag out and lock out procedures. If you are not familiar with this requirement, refer to the information in the service manual and the OSH documentation. DCV-00477 S2 R03 10 CHAPTER 10 Safety First: Working with Electricity Always:
1. Use safe and established practices. 2. Follow OSH Lock-Out and Tag-Out requirements before carrying out any service or installation work. 3. Check all devices before use. Is the wiring in good condition?
Is the grounding connection rmly attached?
Are all sealing devices and compounds in tact and in place?
Never:
1. Use devices if they have any damage. 2. Skip over safety procedures for any reason. Faulty wiring or unsafe procedures can cause a re, explosion or electrical shock. Station employees and service contractors must understand and comply with these guidelines completely to ensure safety while the equipment is down. DCV-00477 S2 R03 11 CHAPTER 11 Hazardous Materials Some materials present inside electronic enclosures may present a health hazard if not handled correctly. Always wear gloves if practical to do so. Keep your hands away from your eyes and mouth during installation. Wash your hands as soon as possible. DCV-00477 S2 R03 12 CHAPTER 12 Informing Emergency Personnel Emergency personnel will need the following information:
Location of accident (e.g. address, front/back of building). Nature of accident (e.g. possible heart attack, run over by car, burns). Approximate age of victim (e.g. baby, teenager, middle-age, elderly). Whether or not victim has received rst aid (e.g. stopped bleeding by pressure). Whether or not victim has vomited (e.g. if swallowed or inhaled something). Warning: Oxygen may be needed at scene if gasoline has been ingested or inhaled. Seek medical advice immediately. DCV-00477 S2 R03 13 CHAPTER 13 Computer Programs and Documentation All Invenco Group Ltd. computer programs (including software on discs and within memory chips) and documentation are copyrighted by, and shall remain the property of, Invenco Group Ltd. Such computer programs and documents may contain trade secret information. The duplication, disclosure, modication, or unauthorized use of computer programs or documentation is strictly prohibited unless otherwise licensed by Invenco Group Ltd. DCV-00477 S2 R03 14 CHAPTER 14 Approvals Invenco develops and maintains its hardware and software products using industry-standard quality processes, and is audited by the MasterCard TQM (Terminal Quality Management) scheme. The G6-300 OPT has the following approvals:
TQM (Quality) PCI (Payment Card Industry) EMV standards (Security) EN 55032 (Emissions) EN 55024 (Immunity) EN 300 300 & ETSI 301 489-3 (in conjunction with ETSI 301 489-1) for Radio FCC certication (Part 15.225, 15.207 transmitter) IC certication (RSS-Gen Issue 5 section 8.8 & RSS-210 Issue 9 Section B.6) IEC/EN/UL 62368-1 (Safety Audio/video, information and communication technology equipment) UL 121201 (Hazardous location safety Class I Division 2) 14.1 European Directives The G6-300 complies with the necessary European Directives for the CE mark. DCV-00477 S2 R03 15 G6-300 Installation Guide, DCV-00477 S2 R03 14.2 FCC FCC ID: 2AC7B-G6300OPT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, undesired operation. including interference that may cause Note: The grantee is not responsible for any changes or modications not expressly approved by the party responsible for compliance. Such modications could void the users authority to operate the equipment. interference in a residential Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Chapter 14. Approvals 16 CHAPTER 15 Product Features 15.1 Location of Features Fig. 15.1: G6-300 Front Features DCV-00477 S2 R03 17 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 15.2: G6-300 Rear Features Chapter 15. Product Features 18 CHAPTER 16 Accessories in the box Inside the box is a small plastic bag that contains a spindle and a gasket. Fig. 16.1: Accessories bag DCV-00477 S2 R03 19 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 16.2: Spindle to hold printer paper Fig. 16.3: Gasket for mounting G6-300 to pump head Chapter 16. Accessories in the box 20 CHAPTER 17 Location of Mounting Points Green highlights show the standard mounting points for a new installation. See the Drawings at the end of this guide for panel cut-out information. Fig. 17.1: Location of mounting points (in green). DCV-00477 S2 R03 21 CHAPTER 18 Installation 18.1 Installing a Brand New OPT In most cases a new installation must be done by the pump manufacturer, not a third party. Each pump has safety certications that can be invalidated if anyone other than the manufacturer modies it. Before a G6-300 can be installed, the pump enclosure must meet the following standards:
1. Fire. The enclosure must be designed to meet the requirements of ISO/EN 60950-1 for re enclosures. 2. ATEX (Explosive Atmospheres). The G6-300 has openings that prevent it being gas-tight. Because of this, it should be installed away from all hazards. Refer to local laws and regulations for hazardous zones to work out the best mounting place for the G6-300. The pump or cabinet that the G6-300 is mounted in should also be designed to prevent a dangerous build-up of explosive gases. 3. Security. The pump or cabinet should offer physical security to protect the public from the hazards within, and to reduce the ability of anyone to tamper with the OPT. 4. Power & Data. a. The pump or cabinet must provide mains power. The requirements are:
i. A permanently-wired connection or a socket to plug it into. ii. A protective earth connection. iii. The outlet may be switched if it is a socket, and must be switched if it is permanently wired. iv. We recommend one Power Supply Unit (PSU) per G6-300. The use of two G6-300s on If using a single PSU may lead to erratic start up behaviour and is not recommended. two G6-300s to one PSU, both must have power applied at the same time to reduce this risk. b. The pump or cabinet must provide an Ethernet data connection. The requirements are:
v. Capable of at least 10Mbps (preferably 100Mbps). DCV-00477 S2 R03 22 G6-300 Installation Guide, DCV-00477 S2 R03 vi. The connection must be either a socket into which a standard Ethernet patch cable can be connected, or a cable that is terminated in a standard RJ45 plug suitable for direct connection into the OPT LAN socket. vii. Minimum cable standard should be Cat5e. c. The enclosure may provide an alternative data connection for terminals that have optional communications modules installed. Please consult with Invenco for what options are available. 5. Accessibility. The enclosure must be designed and mounted so that disabled persons are able to operate the OPT. Height must be compliant with PCI 5.0 standards. The G6-300 has an optional ADA keypad that can be purchased and installed if required in order to meet this compliance. 6. Materials. The enclosure and all its components must be constructed of durable materials suitable for the intended location. 7. Door cut-out. d. Use the wireframe 38 Drawings at the end of this manual to determine the extra space required for the front of the terminal (the terminal is larger than cut-out). e. The edge of the cut-outs should be smooth and free of burrs, and the surface of the door around the cut-out should be clean, and planar within 1mm. 8. Water-Tightness. The G6-300 is rated for IP24 on its external parts. The parts sitting inside the pump/pedestal enclosure are designed to reduce the likelihood of rain splashes entering the electronics but the enclosure must provide good protection from water. The door should have a water seal against the enclosure, and there should be good drainage and/or a system to reduce excessive condensation build-up and dripping. 9. Protection from Weather Extremes. | While the G6-300 is intended for use outdoors, exposure to direct sunlight and/or heavy rain can affect customers experience using the product. | The pump or enclosure should provide a canopy that prevents the OPT from being exposed to direct sunlight and heavy rain. | If the OPT cannot be protected from direct sunlight, a warning sign should be provided close to the OPT advising that the screen may become too hot to touch. 10. Placement. The G6-300 must always be installed in an upright (vertical) position with no horizontal tilt. 11. Hinging. Use the following diagrams as a guide when designing an enclosure and/or door to house the G6-300. This will ensure there is a clearance between the G6-300 housing and the opening. Note:
cables to be pulled out. Invenco Recommends Right-side hinging only. Hinging on the left side may cause Chapter 18. Installation 23 G6-300 Installation Guide, DCV-00477 S2 R03 Hinging Option 1 For models without an internal printer, or for models with a printer where the paper has been mounted with the spindle moving right to left through the paper roll (with the point to the center of the terminal):
Fig. 18.1: G6-300 Side hinging diagram, spindle pointed left or with no printer. Hinging Option 2 For models with an internal printer, where the paper has been mounted with the spindle moving left to right through the paper (with the point ending by the right side of the terminal):
Fig. 18.2: G6-300 Side hinging points diagram, spindle pointed left. Chapter 18. Installation 24 G6-300 Installation Guide, DCV-00477 S2 R03 Hinging Option 3 Top and bottom hinging points, suitable for all models. Fig. 18.3: G6-300 Top-bottom hinging diagram. Chapter 18. Installation 25 CHAPTER 19 Tools Required to Mount the G6-300 12 x M4 screws of the correct length to attach the OPT to your pump/cabinet. A screw driver to t the M4 screws. Philips #1 or Flat 5mm screw driver - for connections on the power supply. Small adjustable spanner - for earth connections inside the cabinet. Cable ties. Side cutters - to trim the cable tie(s). You may require other tools if retrotting into a non-standard enclosure. Warning: Do not use power tools if working on a fuel station forecourt. Any spark could cause a re or explosion. DCV-00477 S2 R03 26 CHAPTER 20 Installing Into a New Pump or Cabinet Fig. 20.1: Installing a New G6-300 DCV-00477 S2 R03 27 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 20.2: How to Attach the Gasket Chapter 20. Installing Into a New Pump or Cabinet 28 CHAPTER 21 Upgrading an Existing Invenco Outdoor Payment Terminal The G6-300 is designed to t into the existing cut-out created for an earlier G6 model to allow for an easy upgrade. It will also t onto legacy upgrade kits for those customers who have upgraded in the past from a G5 to a G6 OPT. DCV-00477 S2 R03 29 CHAPTER 22 Power Supply Considerations The G6-300 has been certied using a one-to-one ratio of G6-300 to power supply unit. All other congurations are not certied. DCV-00477 S2 R03 30 CHAPTER 23 Wiring Three connections need to be made to the G6-300:
1. Protective Earth. 2. Ethernet LAN. 3. DC Power supply. The DC power supply cable also needs to be connected to the power supply. DCV-00477 S2 R03 31 CHAPTER 24 Protective Earth The G6-300 is provided with an Earth Tab and is recommended to be earthed. The tab must be connected to the pump (or cabinet) frame to provide protection from both power faults and static discharges. The earth wire must be minimum 1.5mm and both it and the earth stud must meet local regulations. DCV-00477 S2 R03 32 CHAPTER 25 Ethernet LAN The Ethernet cable is plugged into the correct connector on the rear of the G6-300:
Fig. 25.1: Ethernet connection DCV-00477 S2 R03 33 CHAPTER 26 DC Power Supply The low-voltage DC Cable is plugged into the correct connector on the rear of the G6-300:
Fig. 26.1: Low-voltage DC cable DCV-00477 S2 R03 34 CHAPTER 27 Main Power Supply Wiring The other end of the low-voltage DC Cable is connected into the AC-DC power supply:
Warning: Once all the wiring to the power supply terminals has been completed, install the terminal cover to prevent accidental contact with the live mains connections DCV-00477 S2 R03 35 CHAPTER 28 Wiring Completion When all the cables have been installed, use cable ties to provide strain relief. Ensure that all cables are tidy and cannot become snagged or pinched when the door of the cabinet is opened and closed. Warning: Local regulations may also require that the installation is electrically tested and certied BEFORE switch-on. DCV-00477 S2 R03 36 CHAPTER 29 First Power-Up Once the installation is complete and the wiring is certied (if necessary), the main power can be switched on. The G6-300 takes a couple of minutes to complete its start-up phase. During this, several standard information screens will display. There may be other screens as well, depending on customer conguration. DCV-00477 S2 R03 37 CHAPTER 30 Standard Screens Start up screen:
Fig. 30.1: G6-300 Start up screen. DCV-00477 S2 R03 38 G6-300 Installation Guide, DCV-00477 S2 R03 Connecting to ethernet screen:
Fig. 30.2: Trying to establish ethernet connection. Chapter 30. Standard Screens 39 G6-300 Installation Guide, DCV-00477 S2 R03 When the terminal has successfully connected to the Ethernet LAN it will display the following screen:
Fig. 30.3: Ethernet connection established. If the Ethernet LAN is not operational the terminal will display this screen instead:
Fig. 30.4: Ethernet connection not established. After this the start-up will continue with the screens changing depending on individual customer conguration. Chapter 30. Standard Screens 40 CHAPTER 31 Basic Maintenance 31.1 Cleaning The G6-300 is designed to be low maintenance. Daily cleaning:
Wipe with a soft damp cloth using only water. If dirt or grime builds up:
Use a diluted mild detergent and wipe with a soft cloth. Dry the screen using a lint-free or microber cloth. Things to watch out for:
Always clean off excess detergent. Do not use a high pressure water stream to clean your G6-300. Water pressure may damage the card reader or printer chute. Do not rub the display if it is dry - dust or dirt can scratch the anti-reective coating. Do not use petroleum based solvent cleaners, they will damage the surface and shorten the life of your product. Over time the printer may build up dust and/or debris from the paper cutting function. Please do not clean this yourself - refer cleaning to a qualied service agent. DCV-00477 S2 R03 41 CHAPTER 32 How to Load Paper DCV-00477 S2 R03 42 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 32.1: How to Load Paper. Chapter 32. How to Load Paper 43 CHAPTER 33 Clearing a Paper Jam If you need to clear a paper jam, remember:
Dont use anything sharp - it could damage the printer. Be gentle. If you take the paper roll out, you should be able to see where the paper is jammed and free it with a little bit of patience and a gentle touch. Any damage done to the printer while clearing a paper jam is not covered by warranty. DCV-00477 S2 R03 44 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 33.1: How to clear a paper jam. Chapter 33. Clearing a Paper Jam 45 CHAPTER 34 Security Checks 34.1 Built in Security The G6-300 has built-in tamper detections, but you should also regularly check your G6-300 for signs of tampering or alteration. If it looks different to normal, then there could be a hidden camera or PIN-disclosing bug - you might have a problem that thereatens customer security. 34.2 Extra Security Checks Use this section to carry out extra security checks, and if youre still not sure about your G6-300 then call Customer Support. The following pages include photos and descriptions of what the G6-300 components should look like. If your G6-300 looks different in any way , DO NOT use it. Follow the escalation procedure in 36 Escalation if you have any doubts at all about the integrity of your OPT. DCV-00477 S2 R03 46 CHAPTER 35 Inspection The G6-300 has a smooth nish with an uninterrupted surface. Any breaks or uneven surfaces should be inspected as a potential security concern. 35.1 Key Pad 1. The G6-300 keypad has a matt black surround with matt key tops. The key-tops are back-lit. The numbers must be illuminated when the key-pad is active. If the numbers dont light up when the key-pad is active, then check the key-pad for signs of tampering or an overlay. 2. The matt black surround is a ush mount to the G6-300 front fascia. If it appears not to be ush with the front fascia surface, check to see why. 3. The key-pad privacy shield is a smooth, uninterrupted surface, and should be inspected for uneven surfaces, cracks or holes that could be as a result of a PIN disclosing camera being placed on/into the OPT. DCV-00477 S2 R03 47 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 35.1: Example of keypad and privacy shield. 35.2 Card-Reader Slot and Contactless Reader What to check for:
Are there any wires of any kind coming out of the Card Slot?
Chapter 35. Inspection 48 G6-300 Installation Guide, DCV-00477 S2 R03 There should be no visible wires at all on or around the Card Slot. Is the OPT nish uninterrupted and consistent across the Card Slot?
There should be no cracks, holes or bumps of any kind. Does the card slot acceptor light:
Flash green when it is ready and waiting to accept a card?
Turn red when a card is inserted and a transaction is processing?
Turn blue only when the card can be safely removed?
Does the Contactless Reader:
Show one steady green light when ready to accept a payment?
Note: Remember, if your G6-300 does not look or act like it should, do not use it. Contact Invenco immediately for further assistance. Fig. 35.2: Front of card slot. Chapter 35. Inspection 49 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 35.3: Card slot insertion light. Chapter 35. Inspection 50 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 35.4: Left hand close-up of card slot. Chapter 35. Inspection 51 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 35.5: Right hand close-up of card slot. Chapter 35. Inspection 52 CHAPTER 36 Escalation If you think that your G6-300 has been tampered with:
Contact the vendors security person or support desk immediately. If neither of those contacts are available, contact Invencos security ofcer at the Auckland address detailed at the end of this document. Notify local law-enforcement immediately. DCV-00477 S2 R03 53 CHAPTER 37 Removal & Reinstallation 37.1 How to Uninstall a G6-300 Fig. 37.1: Instructions for Uninstalling a G6-300. DCV-00477 S2 R03 54 G6-300 Installation Guide, DCV-00477 S2 R03 37.2 How to Reinstall a G6-300 Fig. 37.2: Instructions for Reinstalling a G6-300. Chapter 37. Removal & Reinstallation 55 CHAPTER 38 Drawings 38.1 Dimensions Fig. 38.1: G6-300 Front Dimensions. DCV-00477 S2 R03 56 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 38.2: G6-300 Side Dimensions. Chapter 38. Drawings 57 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 38.3: G6-300 Rear Dimensions & Mounting Points. Chapter 38. Drawings 58 CHAPTER 39 Mounting New Installation Fig. 39.1: Mounting guide - NOT TO SCALE. Do not use as a template. DCV-00477 S2 R03 59 G6-300 Installation Guide, DCV-00477 S2 R03 Fig. 39.2: Exploded view, mounting to panel. Chapter 39. Mounting New Installation 60 CHAPTER 40 Typical Wiring The next page shows the standard and typical wiring for the G6-300. We recommend that you use this wiring for safety and correct performance. DCV-00477 S2 R03 61 G6-300 Installation Guide, DCV-00477 S2 R03 Chapter 40. Typical Wiring 62 Fig. 40.1: Typical G6-300 wiring. CHAPTER 41 Release History Version Prepared by 1.0 2.0 3.0 Kristy Clarkson Kristy Clarkson Kristy Clarkson Date 20190904 20191025 20191105 Change description Created document. Revision of images Addition approvals of further DCV-00477 S2 R03 63 NEW ZEALAND Level 2, 7-11 Kawana St Northcote Auckland 0627 New Zealand Ph: +64 9 905 5600 ASIA Level 3, Wisma Ali Bawal 1 Jalan Tandang 46050 Petaling Jaya Selangor, Malaysia Ph: +60 3 7781 0298 NORTH AMERICA Building 100, Windward Chase 1235 Old Alpharetta Rd, Suite 130 Alpharetta Georgia 30005, USA Ph: +1 470 253 7568 EUROPE 6th Floor, White Building 1 - 4 Cumberland Place Southampton SO15 2NP United Kingdom Ph: +44 23 8022 7645 2019, Invenco Group Ltd. All rights reserved. No part of this document may be copied or reproduced in any form without the prior written consent of Invenco Group Ltd. The information in this document is subject to change without notice and should not be construed as a commitment by Invenco Group Ltd. Invenco Group Ltd has made all reasonable efforts to verify the accuracy of this document but assumes no responsibility for any technical inaccuracies or typographical errors.
This product uses the FCC Data API but is not endorsed or certified by the FCC