WF02D Wi-Fi Control Box Users Manual

WF02D User Manual 1. Connect the WiFi box cable to the control box Multifunction interface. Connect the control box to the 220V through the power supply. 2. Double click reset key, the LED will be on. Long press the back button of the remote, the LED will be flash. When two LEDs are off, the connection of the remote and the control box is completed. 3. APP download APP name: Ergo WiFi iOS:

https://itunes.apple.com/us/app/ergowifi/id1234525549?l=zh&ls=1&mt=8 android:

https://play.google.com/store/apps/details?id=com.keeson.smartbed&hl=en 4. User register(via email) Remember the email and password, will be used for logging APP and Alexa voice control. 5. Press two buttons of foot-up and foot-down on the remote about 5 seconds. The blue LED will flash, and the buzzer will make a sound of Bee every 3 seconds. 6. Open the WiFi settings interface on the phone. Select the WiFi with the name of KeesonAp-xxxxxxxx. Wait for the WiFi connection to complete. Chhina Mobile Set Insecure networks 7. Open the Ergo WiFi APP

. Push the menu button

. Select All the beds option. China Mobile China Mobile 8. On the All the beds interface, push the Connect new bed button to enter the Connect bed interface. China Mobile 9. On the Connect bed interface, select the WiFi name that the WiFi box will connect to. Input WiFi Password, push the Done button to enter the New bed interface. Wait for the WiFi box connect to the WiFi signal. When the WiFi box makes sound of Bee-Bee, it completes the connection. China Mobile China Mobile 10. Open the WiFi settings interface on the phone. Select the WiFi name that the WiFi box has connected. China Mobile Set 11. Return to the APP, on the New bed interface, wait for a moment, the WiFi box will be found, the ID will be displayed. Click the ID number, then click the Ok on the Bind notice to complete the connection operation. China Mobile China Mobile 12. Return to the APP main interface to control the bed. FAQ Now WiFi dongle only support 2.4G WiFi network. FCCStatement Any Changes or modifications not expressly approved by the party responsible for compliance could void the usersauthoritytooperatetheequipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This devicemaynotcauseharmfulinterference,and

(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. ISEDRSSWarning:

ThisdevicecomplieswithInnovation,ScienceandEconomicDevelopmentCanadalicenceexemptRSSstandard(s). Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevice mustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitationestautoriseauxdeuxconditionssuivantes: (1) l'appareilnedoitpasproduiredebrouillage,et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptibled'encompromettrelefonctionnement. ISED RF exposure statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte ISED fixaient un environnement non contrls.Installation et mise en uvre de ce matriel devrait avec changeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres.