8406318-24GTX 1/24 R/C Jet Panther User Manual

NO.: 84061 / 84063 / 84064 /

84065 / 84521 / 84522 1:24 SCALE Contents

-RC Vehicle (Vehicle) x 1

-RC Transmitter (Transmitter) x 1

-Instruction Manual x 1 25 RC Transmitter x 1 RC Vehicle x 1 by adult age6 PRO. SYSTEM 3 x AAA For Vehicle

(Not Included) 2 x AAA For Transmitter

(Not Included) Battery Installation For Vehicle (Fig. 1 and Fig. 2) 1. Switch OFF the power 2. Unscrew the screw on the battery cover 3. Open the battery cover 4. as shown inside the battery compartment 5. Close the battery cover 6. Tighten the screw on the battery cover Install 3 new 1.5V AAA batteries with correct polarities (+/-) For Transmitter (Fig. 3 and Fig. 4) 1. Unscrew the screw on the battery cover 2. Open the battery cover 3. as shown inside the battery compartment 4. Close the battery cover 5. Tighten the screw on the battery cover Install 2 new 1.5V AAA batteries with correct polarities (+/-) Vehicle Fig. 2 Transmitter Fig. 4 Direction Adjustment Battery Compartment Fig. 1 ON/OFF Turbe Boost

/ Bind key Steering Wheel Accelerator Trigger Vehicle - Battery Installation Fig. 3 Transmitter - Battery Installation How To Bind 84063 1. Turn on the Vehicle. 2. Hold the Signal Match Button for 4 second then the Transmitter signal light will flash for 6-7 second. When the Transmitter signal light keep on will show the matching. 3. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing. 4. If it cannot complete within 8 seconds, please turn off both Vehicle and Transmitter and re-start the binding process. 5. When the binding process is done, whenever switching the Vehicle and Transmitter on and off, it searches for the code that it memorized, and will only lock on to the Transmitter signal containing that code. 6. Please turn off both Vehicle and Transmitter and re-start all binding process if changing to another 2.4GHz Transmitter for playing. How To Play 1. Switch ON the Vehicle. Vehicle 3. Use the Accelerator Trigger to drive the Vehicle Forward, Stop and Backward Forward Stop Backward 2. Use the Steering Wheel to control the Vehicle turning left or right Turn Left Turn Right 4. If the vehicle does not run in straight line, adjust the Direction Adjustment on the Vehicle chassis (Fig.1) 5. Play on smooth surface to have the optimum performance 6. Remember to switch OFF the power of the Vehicle after playing 7. The optimum control range is up to 25m outdoor Braking Action Keep driving forward rapidly then switch to backward for the braking action. When the trigger of the Transmitter returns to the center position, push it again for the backward action. Performance Tips 1. Do not drive on grass, dirt, sand, dusts, carpet or go through water 2. Do not drive in windy or rainy weather 3. Avoid direct impact the Vehicle with obstacles 4. Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter due to leakage of electrolyte from batteries 5. Remove all batteries from the Vehicle and Transmitter when not in use for long period 6. Keep fingers, hair and loose clothing away from wheels 7. The operating range can be affected by a variety of factors a) Low Voltage of batteries in Transmitter or Vehicle b) Interference from other items that emit radio frequency signals 8. Outdoor usage is recommended in order to get optimum control range 9. Recommend to play the vehicle on a clean and smooth surface 10. Clean the battery compartment to make sure it is free from dust to prevent poor contact of batteries Cautions 1. Do not attempt to disassemble the Vehicle or Transmitter 2. Make sure the batteries are installed with correct polarities (+/-) as shown inside the battery compartment 3. Remove the package and take out all accessories before giving the Vehicle and Transmitter to child to play The packaging and instruction manual contain important information. Please keep them for future reference. Warning! Choking Hazard. Not suitable for children under the age of 3 years due to small parts. We reserve the right to improve/amend specifications and colors without notice. FCC label compliance statement:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

-

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help Increase the separation between the equipment and receiver Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RSS-210 Compliance Statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada,. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Declaration of Conformity The product is in conformity with the requirement of EU Directive 2014/53/EU. Environmental notes:

The whole product also does not belong to household waste at the end of the product life. You can return it at collection points for the recycling of electronic and electronical instruments The symbol on the item, instruction manual, hangtag or packing is showing this clearly. Materials should be recycled according to their respective markings. Recycling of old devices or other re-use of materials contained therein represents an important contribution to environmental protection. Please ask at your local community for the correct collection point. Disposal of batteries Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold. You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:

Pb=Battery contains lead Cd=Battery contains cadmium Hg=Battery contains mercury Frequency band: 2410 - 2475 MHz Maximum radio frequency power transmitted: <0 dBm Conforms to the safety requirements of ASTM F963 KIDZTECH TOYS MANUFACTURING LTD. Room 1201,12/F, Inter-Continental Plaza, 94 Granville Road, TST East, Hong Kong. Tel: (852) 27218868 info@kidztech.net Made in China http://www.kidztech.net