submitted | available | document details (if available) | source link |
---|---|---|---|
August 19 2016 | August 19 2016 | Adobe Acrobat 11.0.17 Image Conversion Plug-in |
various | Users Manual | Users Manual | 973.39 KiB | August 19 2016 |
LIFEJACKET 3 RUGGED BLUETOOTH SPEAKER 1.Make sure the following items are included in your package. fi 4.Pairing a Single speaker with Bluetooth Device Pairing your first device sat When you turn LifeJacket 3 on for the first time, it automatically goes into pairing mode and flash its Bluetooth LED while searching for a Bluetooth source device to pair with. Pairing additional devices Press and - "Buttons at same time. LifeJacket3 will enter pairing mode, and flash its Bluetooth LED while searching for another device. Once the device is paired with, LifeJacket 3 sound to confirm pairing and the Bluetooth LED will remain solid Blue. 6.Stereo Plus Pairing Stereo Plus Pairing allows you to connect two LifeJacket 3's together for bigger sound, You can use Stereo Plus Pairing to pair two LifeJacket 3's without the app: With two LifeJacket 3's turned on and one already paired to your device and playing music, press the + and - buttons on the speaker that is playing music. Then quickly press the + and - buttons on the speaker that you want to add. The connected two speakers will play the same music from the same device. NOTE: You can use Stereo Plus Pairing to pair the LifeJacket 3 with any other Altec Lansing Bluetooth speaker that also has the Stereo Plus Pairing feature. af i 2.For a l9ok at the various buttons on your speaker, view the graph below POWOl ORL OTf noes Sesesescescasacescinn spesaaiie Play/Pause........-cccccceerere ee, $
Volume Up/Down............00...08 eas iaee Pre or-
Pairing mode/Disconnect device..,....Presis and -
Answer/End call.. Piscean ese Press Stereo Plus Pairing... Pres + and -
Factory Reset....... Hold # and - for 5 seconds Voice Control .............. Moc Rect a Mer eM Pres 2 times 5.Pair the Speaker Using NFC With Near Field Communication(NFC), you can easily pair and connect your speaker to your compatible device.Just hold your NFC enabled device directly against the wireless check in spot on your speaker. Quick Start Guide Item #IMW578 | i ALTEL i LANSING 3.Connect the included USB Cable to the included AC adapter to
' : ; . charge your speaker's internal battery. A full charge takes as approximately 4 hours. Charging: When charging, an red LED light will illuminate. The red light will turn off when your unit is fully charged, Indicator A Power on your speaker.Go to the Bluetooth Manager of your Bluetooth device.Search Bluetooth devices and select Lifejacket 3 to start connecting 7.You can also use the included 3.5mm Auxiliary Cable to connect audio devices through AUX In port on your speaker. Technical Support For technical support issues please visit our website at www.alteclansing.com. You can find manuals, software and FAQ's al the website, Can't find what you are looking for? Call 1-855-292-4087 to access our technical support information on the phone. LIFEJACKET 3. RUGGED BLUETOOTH SPEAKER 8e IP67 See et 30 HOURS OF BATTERY WATERPRO SANREROSE WITH BUILT IN EVERYTHING PROOF SMARTPHONE CHARGER aYr
oO) 2 es TRUE WIRELESS HANDS STEREO PLUS PAIRING FREE SPEAKERPHONE NOTE: &
a4 If product is exposed to salt water we recommend that you rinse it off with tap water to maintain proper long term performance of your product :
Using the Mount: The included mounting bracket allows you to attach your speaker to cylinder shaped surfaces such as the handle bars of a bicycle or ATV, or the rails on a yacht. This bracket comes unassembled. To use it, first attach the pieces as shown below. Next connect your speaker by screwing it into your speaker's tripod mount, and then attach the bracket to a suitable surface. Use the included wrench to help you loosen or tighten when necessary. Technical Support For technical support issues please visit our website at www.alteclansing.com. You can find manuals, software and FAQ's at the website. Can't find what you are looking for? Call 1-855-292-4087 to access our technical support information on the phone.
Quick Start Guide Item # IMW578 ALTEC BESSA Altec Lansing One Year Warrarity Card This warranty covers the original consumer ag and is not transferable.
erly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or This warranty covers products that fail to function PM ne year. replaced at no charge for parts or labor for a period o 4 m4 What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in, nlaterial or workmanship and damages or malfunctions front other than normal use, including but limited to, repair by unauthorized partids, tampering, modification or aqpident. To Obtain Warranty Service and Troubleghooting information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com. i To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product, Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANT-
ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTORS SOLE DISCRETION -ARE THE EXCLU-
SIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMERS RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies, This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes er modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful interference to radio or -television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
__ Reaorient or relocate the receiving antenna. ... Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/ TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This product uses the FCC Data API but is not endorsed or certified by the FCC