| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 09 2016 | December 09 2016 | Adobe PDF Library 15.0 |
| various | User Manual | Users Manual | 1.52 MiB | December 09 2016 |
Professional Weather Station FORECAST OUTDOOR HI LO WIND MPH SPEED TOP SPEED LO HI HUMIDITY LEVEL LO INDOOR HI RAIN 1 HR N FEELS LIKE W E in S 1 0.5 0 For online video support:
http://bit.ly/LaxTechTalk Instructional Manual Model: S85807 DC:090616 Protected under U.S. Patents: 5,978,738 | 6,076,044 | RE43903 Table of Contents Setup Preparation .................... Setup ..................................... Display Icons .......................... Wind Readings ........................ Wind History ........................... Rain Readings | History ............ Temperature/ Humidity HI | LO . Weather Alerts ........................ Set Weather Alerts ................... Weather Forecast Icons ............ Seasonal Trees ........................ Sensor Search ......................... Mounting Instructions ............... Replace Wind Cups .................. Replace Directional Vane ........... Factory Restart ........................ Follow Us on Social Media ......... WIFI Icon ............................... Specifications .......................... Care and Maintenance .............. Warranty and Support .............. FCC Statement ........................ Canada Statement ................... 2 2 5 5 6 6 8 9 10 11 11 12 13 14 15 15 16 17 18 18 19 19 19 Page | 1 www.lacrossetechnology.com/S85807 S85807 Setup Preparation Here are some items needed to setup your station (not included):
1. Phillips head screwdriver for assembly. 2. Fresh Batteries: 5 (five) AA alkaline or lithium batteries for the sensors. 3 (three) AAA alkaline batteries for the station (optional). For best results:
Remove weather station and sensors from the package and place together on a table or bench, within easy reach. Place batteries and screwdriver within reach of setup location. Keep sensors and weather station 5-10 feet apart for the first 15 minutes after installing batteries. Setup Power up. Observe correct polarity. Thermo-hygro sensor- 2-AA batteries Multi-sensor- 3-AA batteries Weather Station- 5.0 Volt AC adapter and 3-AAA batteries (optional) TX 1 2 3 C/F
-
+
A A A A
-+
Power Cable
+
-
+
AA AA AA
-
+
-
Note: Batteries are not included Software version will show for 2 seconds. Lower left corner. Optional
+
-
+
AAA AAA AAA
-
+
-
Place sensors outdoors at least 6 feet above objects below them
(ground, roof, etc.) Thermo-hygro sensor-Place in a shaded location to protect from sun. Multi-sensor- Place in an open area. No obstructions for 50 feet in all directions. Enjoy your backyard weather!
S85807 www.lacrossetechnology.com/S85807 Page | 2 Configure basic settings. Hold the SET button to enter settings. Press and release the +/-
buttons to make adjustments and the SET button to confirm. Settings order:
BEEP ON/OFF Time zone (-12 to +12) Auto DST ON/OFF (Daylight Saving Time) Hour Minutes 12h/24h hour format Year Month Date Temperature (C/F) Wind degree or direction (letters) select Wind speed select (mph/kmh) Rainfall unit select (in/mm) North America Time Zones Atlantic Eastern Central Mountain Pacific Alaska Hawaii
-4h
-5h
-6h
-7h
-8h
-9h
-10h Page | 3 www.lacrossetechnology.com/S85807 S85807 1. BEEP ON | OFF2. Time Zone (-12 to + 12)3. Auto DST ON | OFF4. Hours5. Minutes6. 12 | 24 Hour Format Press the LIGHT button at any time to exit. After 30 seconds with no button press, the station will default back to normal time display. S85807 www.lacrossetechnology.com/S85807 Page | 4 7. Year8. Month9. Date10. Fahrenheit | Celsius11. Wind Direction (degrees | letters)12. Wind Speed (MPH | KMH)13. Rain (INCH | MM) Display icons WIFI Strength Trend Arrows Sensor Strength HI | LO Alert Fahrenheit | Celsius Forecast Icon Temperature Percent Humidity Humidity Wind Direction Wind Speed Seasonal Trees Rainfall Graph Wind Readings Current Speed: Highest speed past 30 seconds Top Speed: Highest speed in the past hour Feels Like: Temperature | Humidity | Wind Speed Wind Direction: In letters or degrees History: Press and release the WIND button to view:
1 Hour (default) | 24 Hour | 7 Days | Month | Year Page | 5 www.lacrossetechnology.com/S85807 S85807 Wind History Press and release the WIND button to view the maximum wind history values. One Hour: past 60 minute period (default Top Speed record, already shown) 24-hour: Past 24 hour period, from last record 7 Days: Past 7-day period, from last record Month: Defined by Calendar Month i.e. January 1 - January 31 Year: Defined by Calendar Year i.e. January 1 - December 31 Reset Wind Speed History:
Press the WIND button to view individual wind speed readings. Hold the MINUS button for five seconds to reset the individual value. Wind speed reading will reset to current wind speed. Rain Readings | History Press and release the RAIN button to view:
One Hour: past 60 minute periods, from last record Day: 24 hr period from 12:00am - 11:59pm. With current date 24-hour: Past 24 hour period, from last record. 7 Days: Past 7-day period, from last record Month: Defined by Calendar Month i.e. January 1 - January 31. Year: Defined by Calendar Year i.e. January 1 - December 31. Total: running total since station was powered up (no time stamp) S85807 www.lacrossetechnology.com/S85807 Page | 6 24 Hours7 DaysMonthYear Select your rain history and the station will keep your selection. After viewing a history record for 5 seconds, the station will return to the normal view. Reset Rainfall Readings (each resets individually):
Press the RAIN button to view individual rain readings. Hold the MINUS button for five seconds to reset the individual value. Rainfall reading will reset to 0.00 Page | 7 www.lacrossetechnology.com/S85807 S85807 One Hour24 HoursDay (12:00am - 11:59pm)7 DayMonthYearTotal Temperature/Humidity HI | LO Readings Press and release to view HI/LO temperature and humidity readings with time/date stamp. Outdoor temperature HIGH Outdoor temperature LOW Outdoor humidity HIGH Outdoor humidity LOW Indoor temperature HIGH Indoor temperature LOW Indoor humidity HIGH Indoor humidity LOW Feels like HIGH Feels like LOW Outdoor dew point Note: Feels Like and Dew Point is not time/date stamped. S85807 www.lacrossetechnology.com/S85807 Page | 8 Outdoor Temp HIOutdoor Temp LOOutdoor Humidity HIOutdoor Humidity LOIndoor Temp HIIndoor Temp LO Types of Weather Alerts There are 20 weather alerts available on this weather station. Outdoor LOW Temperature ON/OFF Outdoor LOW Temperature Value -40F-140F (-40C-60C) Outdoor HIGH Temperature ON/OFF Outdoor HIGH Temperature Value -40F-140F (-40C-60C) Outdoor LOW Humidity ON/OFF Outdoor LOW Humidity Value 10%RH-99%RH Outdoor HIGH Humidity ON/OFF Outdoor HIGH Humidity Value 10%RH-99%RH Indoor LOW Temperature ON/OFF Indoor LOW Temperature Value 32F-122F (0C-50C) Indoor HIGH Temperature ON/OFF Indoor HIGH Temperature Value 32F-122F (0C-50C) Page | 9 www.lacrossetechnology.com/S85807 S85807 Indoor Humidity HIIndoor Humidity LOFeels Like HIFeels Like LODew Point Indoor LOW Humidity ON/OFF Indoor LOW Humidity Value 10%RH-99%RH Indoor HIGH Humidity ON/OFF Indoor HIGH Humidity Value 10%RH-99%RH 24-hour Rainfall ON/OFF 24-hour Rainfall Value 0-393 inches (0-99.9mm) High Wind Speed ON/OFF (CURRENT wind) High Wind Speed Value 0-111.8 (0-180kph) (CURRENT wind) Set Weather Alerts Hold the ALERTS button 2 seconds to enter alert set mode. Outdoor Low Temperature alert OFF will show. ALERT ON:
1. Press the +/- buttons to arm the alert. 2. Press the ALERTS button and the alert value will flash 3. Press the +/- buttons to set the alert value (Hold to set quickly). 4. Press ALERTS button to move to next alert. ALERT OFF:
1. Alerts are OFF unless armed. If you do not wish to set an alert, simply press the ALERTS button again to move to the next alert. Active Alert:
When armed alert value is reached, station will beep 5 times each minute, until out of alert range. The flashing alert icon will indicate if is a LOW or HI alert. Press any button to stop the alert sound. The alert icon will flash while value is in alert range. S85807 www.lacrossetechnology.com/S85807 Page | 10 Alert OFF use +/- to armAlert ON use +/- to set value Weather Forecast Icons The forecast icons are determine by the barometric pressure sensor. The tendency arrow show the changes on the barometric pressure is rising or falling. When Outdoor temperature is below 32 F and the forecast is RAIN or T-STORM, the LCD will display SNOW. SUNNY PARTLY CLOUDY CLOUDS RAIN T-STORM SNOW Seasonal Trees The trees and foliage color will change seasonally. The dates are programmed into the weather station for the scene to change automatically. Page | 11 www.lacrossetechnology.com/S85807 S85807 Spring: March 20th Jun 20thSummer: Jun 21st Sep 20thAutumn: Sep 21st Dec 20thWinter: Dec 21st Mar 19th Sensor Search Each sensor has a unique ID and will be parked to the correct sensor location on the display until manually deleted. If sensor loses connection to the weather station for any reason, the weather station will show dashes after 30 minutes. The weather station will search for 5 minutes every hour to reconnect with sensor. 1. In normal mode press and release the SENSOR button to view individual sensor IDs for up to 15 seconds. 2. Press and release the + button to search for the sensor, whos ID is shown. 3. The strength signal icon will animate until the sensor signal is received, or for 3 minutes if no signal available. Delete Sensor:
1. Press the SENSOR button to view individual sensor ID. 2. Hold the - button for 5 seconds to delete the sensor and ID. Add Sensor:
1. Install batteries in sensor. 2. Press and release the SENSOR button to view sensor area
(dashes). 3. Press the + button to search. 4. Press the TX button on sensor. 5. When sensor connects, ID and readings show. S85807 www.lacrossetechnology.com/S85807 Page | 12 TH Sensor IDMulti-sensor IDTH Sensor Deleted Mounting Instructions TX232TH-LCD Temperature/Humidity Sensor Option 1:
Install one mounting screw into a wall leaving some extended. Place the transmitter onto the screw, gently pull the transmitter down to lock the screw into place. Option 2:
Insert the mounting screw through the front of the transmitter and into the wall. Tighten the screw to snug (do not over tighten). Mount the temperature/humidity sensor on a north-facing wall or in any well shaded location. Sun will make it read high. Under an eave or deck rail is preferred. Be sure the outdoor sensor is mounted vertically to drain moisture. Avoid mounting under a metal roof and use stainless steel screws for best WWVB reception and RF transmission. The maximum wireless transmission range to the weather station is over 330 feet (100 meters) in open air, not including walls or floors. TX231RW Multi-sensor For most accurate wind speed and rainfall readings, mount the Multi-sensor in an open area clear for 50 feet in all directions. Mount with the solar panel facing south so the wind direction is correct. See N, S, E W, embossed on the top of the sensor. Use the bubble level on the top of the sensor to ensure it is level, for accurate rainfall readings. Bubble Level Page | 13 www.lacrossetechnology.com/S85807 S85807 The maximum wireless transmission range to the station is over 330 feet (100 meters) in open air, not including walls or trees. Mount sensor vertically. Cups should be on the top of the sensor. Attach to mounting surface with screws through the mounting bracket. The sensor can be mounted from the bottom or from the side. Alternatively:
Insert your own mounting pole sensor. Tighten screws Mounting bracket would not be used. Replace Wind Cups 1. Loosen the screw on side of cups 2. Remove cups 3. Install new cups 4. Tighten screw S85807 www.lacrossetechnology.com/S85807 Page | 14 Replace Directional Vane 1. Loosen the screw on side of vane 2. Remove direction vane 3. Install new vane 4. Tighten screw Factory Restart The factory reset will return the weather station to its default settings. This will clear all previous recorded history, so you may want to write down data before taking this step. 1. Hold the LIGHT and ALERTS buttons together for 5 seconds to reset the weather station, clear all records, and return all settings to default. 2. The weather station will fully populate, then return to a normal display and search for outdoor sensors. 3. While searching for the outdoor sensors the Wind Speed, Outdoor Temperature/Humidity and Rainfall totals will show dashes. 4. Once connected to the outdoor sensors (allow 3 minutes) the Wind Speed, Outdoor Temperature/Humidity, and Rainfall will show current readings. Page | 15 www.lacrossetechnology.com/S85807 S85807 Follow Us on Social Media S85807 www.lacrossetechnology.com/S85807 Page | 16 WIFI Icon The connected icon will flash while station is searching for WIFI connection. It will flash up to 1 hour. The station must operate on AC power for the WIFI to work. Slow Flash - no WIFI network connection-check connection Fast Flash - configure Weather Connect APP Solid - Connected Not displayed -No WIFI router-check router Note: Hold the PLUS and MINUS buttons together for 3 seconds to reconnect, if WIFI signal is lost. Get Connected: Connect your new weather station to the Weather Underground with our Weather connect APP. Weather Connect Note: The Weather Connect App is only for connecting your weather station to Weather Underground When connected:
Time and date will come from the Internet (set your own time zone) View you backyard weather on your phone. WI-FI icon will animate according to signal strength. Page | 17 www.lacrossetechnology.com/S85807 S85807 Specifications Indoor Temperature Range: 32F to 122F (0C to 50C) Humidity Range: 10% to 99% RH Update interval: About every 60 seconds TH Sensor Temperature Range: -40F to 140F (-40C to 60C) Humidity Range: 10% to 99% RH Update interval: About every 58 seconds Transmission Range: 330 ft (100 m) RF 915MHz open air Multi-sensor Wind Speed Range: 0-111.8 mph (0-180 kMh) Wind Direction: 0-359 degrees Rainfall: 0-393.7 inches (0-9999 mm) Update interval: About every 30 seconds Transmission Range: 330 ft (100 m) RF 915MHz open air Power Weather Station: 5.0 Volt 500mA adapter included (Primary) AC6: HX06-0500500-AU Optional Battery: 3-AAA, IEC, LR3 batteries (not included) TX233RW: 3-AA, IEC, LR6 batteries (not included) TX233TH: 2-AA, IEC, LR6 batteries (not included) Battery Life Weather Station: 60 to 48 months when using adapter. Multi-sensor/TH sensor: over 24 month with reputable batteries Dimensions Weather Station: 8.05 W x 5.70 H x 1.36 D in
(204.47 W x 144.78 H x 34.54 D mm) TX233RW Multi-sensor: 13.61 W x 8.55 H x 5.14 D
(345.69 W x 217.17 H x 130.55 D mm) TX233TH Sensor: 1.67 W x 6.14 H x 0.83 D
(42.42 W x 155.96 H x 21.08 D mm) Care and Maintenance Do not mix old and new batteries Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries Always purchase the correct size and grade of battery most suitable for the intended use. Replace all batteries of a set at the same time. Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed correctly with regard to polarity
(+ and -). Remove batteries from equipment which is not to be used for an extended period of time. Promptly remove expired batteries promptly. S85807 www.lacrossetechnology.com/S85807 Page | 18 Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please visit the product web page for more information or contact our friendly customer support:
Online product web page: www.lacrossetechnology.com/S85807 Phone:1-608-785-7921 View full warranty online at: http://www.lacrossetechnology.com/warranty_info_lt/
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment. All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter Canada Statement This device complies with Industry Canadas licence-exempt RSSs Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre lexemption des limites courantes dvaluation dans la section 2.5 de RSS 102 et la conformit lexposition de RSS-102 rf, utilisateurs peut obtenir linformation canadienne sur lexposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps quaucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. Page | 19 www.lacrossetechnology.com/S85807 S85807
This product uses the FCC Data API but is not endorsed or certified by the FCC