| submitted | available | document details (if available) | source link |
|---|---|---|---|
| Leica_CS10_CS15_UserManual_V2_review.fm zik Acrobat Distiller 7.0.5 (Windows) |
| various | UserMan | Users Manual | 2.01 MiB |
Leica CS10/CS15 User Manual Version 1.0 English CS10/CS15, Introduction Introduction Purchase Congratulations on the purchase of a Leica CS10/CS15. 2 This manual contains important safety directions as well as instructions for setting up the product and operating it. Refer to "5 Safety Directions" for further informa-
tion. Read carefully through the User Manual before you switch on the product. Product identifica-
tion The type and serial number of your product are indicated on the type plate. Enter the type and serial number in your manual and always refer to this information when you need to contact your agency or Leica Geosystems authorised service work-
shop. Type:
_______________ Serial No.:
_______________ Symbols The symbols used in this manual have the following meanings:
Type Danger Warning Caution
Description Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation or an unintended use which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor or moderate injury and/or appreciable material, financial and environmental damage. Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. CS10/CS15, Introduction 3 CS10/CS15, Introduction 4 Trademarks Windows is a registered trademark of Microsoft Corporation in the United States and other countries CompactFlash and CF are trademarks of SanDisk Corporation Bluetooth is a registered trademark of Bluetooth SIG, Inc. SD is a trademark of the SD Card Association All other trademarks are the property of their respective owners. Validity of this manual This manual applies to the CS10 and CS15 field controllers. Differences between the various models are marked and described. Available documentation Name Description/Format CS10/CS15 User Manual All instructions required in order to operate the product to a basic level are contained in the User Manual. Provides an overview of the product together with tech-
nical data and safety directions.
Name Description/Format Viva GNSS Getting Started Guide Describes the general working of the product in standard use. Intended as a quick reference field guide.
Name Description/Format Viva TPS Getting Started Guide Viva Series Technical Reference Manual Describes the general working of the product in standard use. Intended as a quick reference field guide.
Overall comprehensive guide to the product and appli-
cation functions. Included are detailed descriptions of special software/hardware settings and software/hard-
ware functions intended for technical specialists.
Refer to the following resources for all CS10/CS15 documentation/software:
the CS field controller CD-ROM https://myworld.leica-geosystems.com myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers a wide range of services, information and training material. With direct access to myWorld, you are able to access all relevant services whenever it is convenient for you, 24 hours a day, 7 days per week. This increases your effi-
ciency and keeps you and your equipment instantly updated with the latest informa-
tion from Leica Geosystems. CS10/CS15, Introduction 5 CS10/CS15, Introduction 6 Service myProducts myService mySupport myTraining Description Simply add all Leica Geosystems products that you and your company own. View detailed information on your products, buy additional options or Customer Care Packages (CCPs), update your products with the latest software and keep up-to-date with the latest documentation. View the service history of your products in Leica Geosystems Service Centers and detailed information on the services performed on your products. For your products that are currently in Leica Geosystems Service Centers view the current service status and the expected end date of service. Create new support requests for your products that will be answered by your local Leica Geosystems Support Team. View the complete history of your Support and view detailed information on each request in case you want to refer to previous support requests. Enhance your product knowledge with the Leica Geosystems Campus - Information, Knowledge, Training. Study the latest online training material or download training material on your products. Keep up-to-date with the latest News on your products and register for Seminars or Courses in your country. CS10/CS15, Introduction 7 CS10/CS15, Table of Contents Table of Contents Chapter In this manual 1 Description of the System 1.1 Overview 1.2 Terminology 1.3 System Concept 1.3.1 1.3.2 1.3.3 Software Concept Power Concept Data Storage Concept 1.4 CS Components CS10 CS15 1.4.1 1.4.2 1.5 Docking Station Components 2 User Interface 2.1 Keyboard 2.2 Operating Principles 3 Operation 3.1 Equipment Setup 8 Page 11 11 12 14 14 16 17 19 19 21 23 24 24 28 29 29 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 3.1.6 Fixing the Display Foil to the CS Fixing a Hand Strap to the CS Fixing the Slot Cover to the CS Setting up as Handheld GNSS Setting up the Docking Station Connecting to a Personal Computer 3.2 Power Functions 3.3 Batteries 3.3.1 3.3.2 3.3.3 Operating Principles Changing the Battery Charging the Battery 3.4 Working with the Memory Device 3.5 LED Indicators on CS10/CS15 3.6 Using the Digital Camera 4 Care and Transport 4.1 Transport 4.2 Storage 4.3 Cleaning and Drying 5 Safety Directions 5.1 General Introduction CS10/CS15, Table of Contents 29 31 33 34 36 37 42 44 44 45 47 49 53 56 58 58 59 60 61 61 9 CS10/CS15, Table of Contents 5.2 Intended Use 5.3 Limits of Use 5.4 Responsibilities 5.5 Hazards of Use 5.6 Electromagnetic Compatibility EMC 5.7 FCC Statement, Applicable in U.S. 6 Technical Data 6.1 CS10/CS15 Technical Data 6.2 GS05/GS06 Technical Data 6.2.1 6.2.2 6.2.3 Tracking Characteristics Accuracy Technical Data 6.3 Antennas Technical Data 6.4 Conformity to National Regulations 6.4.1 6.4.2 CS10 CS15 7 International Limited Warranty, Software Licence Agreement Appendix A Pin Assignments and Sockets Index 10 62 64 65 67 73 76 79 79 84 84 86 87 90 93 93 96 98 100 103 1 1.1 Description of the System Overview System compo-
nents GS06 GS05 CS_028 CS10 CS15 CS10/CS15, Description of the System 11 CS10/CS15, Description of the System 1.2 Terminology 12 CS general descrip-
tion CS is a collective term describing the various models (CS10/CS15) of the multi-
purpose field controller which is used with GNSS and TPS instruments. CS available models l e d o M CS10 CS15 1
m e d o m o d a r l a n r e t n i I
n e e r c s h c u o T
y a l p s i d r u o o C l
2
y r e t t a b l a n r e t n I
d r a c D S
d r a c h s a l F t c a p m o C
h t o o t e u B l
1
g
b 1 1
. 2 0 8 E E E I N A L s s e e r i l W
E C s w o d n W i
Use the supplied stylus on the screens of the touch screen.
*1 optional
*2 removable CS available radios Radios for remote control (RCS) are available for the following devices:
Radio Modem Description CS10 CS15 Field controller with an integrated radio modem. This field controller has a colour display. Field controller with an integrated radio modem. This field controller has a colour display.
All devices contain the same spread spectrum transceiver radio modem. CS10/CS15, Description of the System 13 CS10/CS15, Description of the System 1.3 1.3.1 System Concept Software Concept 14 Software for all CS models Software type CS firmware
(CS_xx.fw) Description This software includes:
- The language-specific version of Windows CE.
- The basic functionality of the CS. Software upload Uploading CS firmware can take some time. Ensure that the battery is at least 75% full before beginning the upload, and do not remove the battery during the upload process. Software for All CS models Description The software is stored in the flash RAM of the CS field controller. The software can be uploaded onto an Leica SD card, Leica CompactFlash card or a USB stick. Software for Description CS firmware update instructions Download the most recent CS firmware file from https://myworld.leica-geosystems.com. Refer to "Intro-
duction". Connect the CS field controller to your PC. Refer to
"3.1.6 Connecting to a Personal Computer". Copy CS firmware file onto a folder on the Leica SD card, Leica CompactFlash card or USB stick. Tap the Loader icon from the desktop, to run the Loader application. Browse to the directory into which you copied CS firmware file, select it and start the upload. A message will appear when the upload is complete.
Ensure that a Leica SD card or a Leica CF card is inserted into the CS field controller before starting the upload. CS10/CS15, Description of the System 15 CS10/CS15, Description of the System 1.3.2 Power Concept 16 General Power options Use the Leica Geosystems batteries, chargers and accessories or accessories recom-
mended by Leica Geosystems to ensure the correct functionality of the instrument. Model all CS models Power supply Internally via GEB211/GEB212 battery, or Externally via docking station, or Externally via GEV235 cable, or Externally via GDC221 car adapter If an external power supply is connected and the internal battery is inserted, then the external power is used. 1.3.3 Data Storage Concept Description Data is stored on a memory device. The memory device can be an SD card, Compact-
Flash card, USB stick or internal memory. Memory device SD card:
CompactFlash card:
USB stick:
Internal memory:
All CS field controllers have an SD card slot fitted as standard. An SD card can be inserted and removed. Avail-
able capacity: 256 MB, 1 GB. All CS field controllers have a CF card slot fitted as standard. A CompactFlash card can be inserted and removed. Available capacity: 256 MB, 1 GB. All CS field controllers have a USB port fitted as standard. All CS field controllers have an internal memory fitted as standard. Available capacity: 1 GB.
While other SD cards or CompactFlash cards can be used, Leica Geosystems recommends to only use Leica SD cards or Leica CompactFlash cards and is not responsible for data loss or any other error that can occur while using a non-Leica card. Removing the SD card, CompactFlash card or USB stick while the CS field controller is turned on can cause loss of data. Only remove the SD card, CompactFlash card or USB stick or unplug connecting cables when the CS field controller is switched off.
CS10/CS15, Description of the System 17 CS10/CS15, Description of the System 18 Transfer data Data can be transferred in various ways. Refer to "3.1.6 Connecting to a Personal Computer".
CompactFlash cards and SD cards can directly be used in an OMNI drive as supplied by Leica Geosystems. Other PC card drives can require an adaptor. 1.4 1.4.1 CS Components CS10 Upside of CS10 CS_001 a b c d e f g h i j a) Slot Cover b) Screen c) Keyboard d) Port cover e) Power socket f) USB A Host port g) Docking station contacts h) LEMO port (USB and serial) i) USB Mini port j) DSUB9 port CS10/CS15, Description of the System 19 CS10/CS15, Description of the System Underside of CS10 20 a b c d e f g h i j k C F S D CS_008 a) Hand strap bottom clips b) Hand strap c) Battery compartment d) Digital camera e) Hand strap top clips f) g) Slot cover h) Stylus i) GS05 contacts j) k) SD card slot CompactFlash card slot Slots
A Bluetooth port is included inside to facilitate connectivity to a digital cellular phone. 1.4.2 CS15 Upside of CS15 CS_002 a b c d e f g h i j a) Slot cover b) Screen c) Keyboard d) Port cover e) Power socket f) USB A Host port g) Docking station contacts h) LEMO port (USB and serial) i) USB Mini port j) DSUB9 port CS10/CS15, Description of the System 21 CS10/CS15, Description of the System Underside of CS15 22 a b c d e f g h i j k C F S D CS_007 a) Hand strap bottom clips b) Hand strap c) Battery compartment d) Digital camera e) Hand strap top clips f) g) Slot cover h) Stylus i) GS06 contacts j) k) SD card slot CompactFlash card slot Slots
A Bluetooth port is included inside to facilitate connectivity to a digital cellular phone. 1.5 Docking Station Components Docking station a b c d e a) Power socket b) USB port c) Docking station bracket d) Docking station contacts e) GEV223 data cable CS_020 CS10/CS15, Description of the System 23 CS10/CS15, User Interface 2 2.1 User Interface Keyboard Keyboard display CS10 24 a b c d e f CS_005 Fn OK 2 ABC 5 JKL 8 TUV 0
. 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ g h i j k l a) Home b) ON/OFF c) Arrow keys, OK d) Fn e) key f) Brightness g) Favourites h) ESC i) j) k) Volume l) Numeric keys Enter Backspace Keyboard display CS15 F1 F2 F3 F4 F5 F6 OK 2 5 8 3 6 9 Fn 1 4 7 F7 0
. F12 F8 F11 F9 F10 Q W E R T Y U I O P A S D F G H J K L Z X C V B N M a b c d e f g h i CS_006 j k l m n o p q r a) Home b) Arrow keys, OK c) ON/OFF d) Fn e) key f) Numeric keys g) Brightness h) Function keys F7 - F12 i) j) k) Favourites l) m) ENTER n) Backspace o) Volume p) Alpha keys q) ENTER r) SPACE CAPS Lock Function keys F1 - F6 ESC Keys Key Function keys F1-F6 Function Correspond to six softkeys that appear on the bottom of the screen when the screen is activated. F1 CS10/CS15, User Interface 25 CS10/CS15, User Interface 26 Key Function keys F7-F12 Alpha keys Numeric keys Caps Lock Backspace Esc Fn Space Enter F7 X 1 Fn Function User definable keys to execute chosen commands or access chosen screens. To type letters. To type numbers. Switches between upper case and lower case letters. Clears all entry at the beginning of user input. Clears the last character during user input. Leaves the current screen without storing any changes. Switches between the first and second level of func-
tion keys. Enters a blank. Selects the highlighted line and leads to the next logical menu / dialog. Key ON/OFF Favourites Home Arrow keys OK Function Starts the edit mode for editable fields. Opens a selectable list. If CS10/CS15 already off: Turns on CS10/CS15 when held for 2 s. If CS10/CS15 already on: Turns to Power Options menu when held for 2 s. Goes to a website by simply clicking its name. Switches to the Windows CE Start Menu. Move the focus on the screen. Selects the highlighted line and leads to the next logical menu / dialog. Starts the edit mode for editable fields. Opens a selectable list. OK OK CS10/CS15, User Interface 27 CS10/CS15, User Interface 2.2 Operating Principles 28 Keyboard and touch screen The user interface is operated either by the keyboard or by the touch screen with supplied stylus. The workflow is the same for keyboard and touch screen entry, the only difference lies in the way information is selected and entered. Operation by keyboard Information is selected and entered using the keys. Refer to "2.1 Keyboard" for a detailed description of the keys on the keyboard and their function. Operation by touch screen Information is selected and entered on the screen using the supplied stylus. Description Tap on the item. Operation To select an item To start the edit mode in editable fields Tap on the editable field. To highlight an item or parts of it for editing To accept data entered into an editable field and exit the edit mode To open a context-sensitive menu Drag the supplied stylus from the left to the right. Tap on the screen outside of the editable field. Tap on the item and hold for 2 s. 3 3.1 3.1.1 Operation Equipment Setup Fixing the Display Foil to the CS Fixing the display foil to the CS step-
by-step 2 1 CS_029 Description 3 4
Ensure that the display of the CS is free of dust and grease.
The non-reflecting display foil has a silver-coloured sticker to peel away the carrier foil from the actual display foil. Touch the silver-coloured sticker with two fingers and pull it slowly upwards. The carrier foil is peeling away. 1.
Do not peel the carrier foil more than 2 cm - 3 cm away. CS10/CS15, Operation 29 CS10/CS15, Operation 30 2. 3. 4. Description Fix the laid open adhesive underside of the display foil at the display border.
Pay attention that the display foil is not fixed between display and display frame. Peel away the carrier foil bit by bit and smooth it out slowly onto the display. Potential air bubbles between display and display foil have to be smoothed out using the included microfibre cloth.
Do not use sharp objects!
3.1.2 Fixing a Hand Strap to the CS Fixing the CS to a hand strap step-
by-step 4 1 2 3 CS_009 Description
Turn the CS field controller over. 1. 2. 3. Take the end of the hand strap and clip it to the base of CS field controller. Compress the clips of the main hook. Lower the main hook onto the pivot knob of the CS field controller. A click can be felt when the clip is secure. CS10/CS15, Operation 31 CS10/CS15, Operation 32 Description Adjust the length of the hand strap. 4. 3.1.3 Fixing the Slot Cover to the CS Fixing the slot cover to the CS step-by-step 2 1 CS_016 1. 2. Description Press the screwdriver end of the supplied stylus on the quarter-turn screws and loosen them. Remove the slot cover.
Reattach the slot cover with the stylus, making sure the quarter-turn screws are seated. CS10/CS15, Operation 33 CS10/CS15, Operation 3.1.4
Setting up as Handheld GNSS 34 The setup GS05/CS10 is identical to the setup GS06/CS15. For simplicity, the setup GS05/CS10 is used in the following. Attaching the GS05 to the CS10 step-
by-step 2 1 3 CS_011 Description 4
Detach the slot cover from the CS10. Refer to "3.1.3 Fixing the Slot Cover to the CS". Check the position of the contacts in the inner surface of the GS05. 1. 2. 3. 4. Description Attach the GS05 to the CS10. Press the screwdriver end of the supplied stylus on the quarter-turn screws and tighten them. To achieve the optimal satellite tracking performance, mount the AS05
(external GNSS antenna) on the GS05. CS10/CS15, Operation 35 CS10/CS15, Operation 3.1.5 Setting up the Docking Station 36 Mounting compo-
nents of the docking station step-by-step 2 1 1 CS_027 1. 2. Description Hold the docking station bracket as shown in the illustration in relation to the docking station rack. Slightly press the holder into the docking station rack. A click can be felt when the holder is secure. 3.1.6
Connect USB cable to PC for the first time step-by-step Connecting to a Personal Computer Microsoft ActiveSync (for PCs with Windows XP operating system) or Windows Mobile Device Center (for PCs with Windows Vista operating system) is the synchronisation software for Windows mobile-based pocket PCs. Microsoft ActiveSync or Windows Mobile Device Center enables a PC and a Windows mobile-based pocket PC to communicate. 3 2 D V D 10 5 CS_025 1. Description Start the PC. CS10/CS15, Operation 37 CS10/CS15, Operation 2. Description Plug the GEV234 cable into CS field controller.
For CS field controllers with DSUB9 connector, the GEV223 cable has to be used. 38 Turn the CS field controller on. 3. 4. Wait until the Windows CE desktop is visible. 5. Plug the GEV234 cable into the USB port of the PC.
The new hardware wizard starts up automatically. Select No, not at this time. Select Install from a list or specific location (Advanced). 6. 7. Next>. 8. 9. Next>. 10. 11. Select Search removable media (floppy, CD-ROM...). 12. Next>. 13. Confirm Hardware Installation window with Continue Anyway. 14. Finish. Insert the CS field controller CD-ROM. Description For PCs with Windows XP operating system:
15. Run the ActiveSync installation program if not already installed. 16. Allow USB connections inside the Connection Settings window of ActiveSync. For PCs with Windows Vista operating system:
17. Run the Windows Mobile Device Center installation if not already installed. Connect to PC via USB cable step-by-
step 5 CS_026 1. Description Start the PC. 3 2 CS10/CS15, Operation 39 CS10/CS15, Operation 40 2. 3. 4. 5. 6. Description Plug the GEV234 cable into CS field controller.
For CS field controllers with DSUB9 connector, the GEV223 cable has to be used. Turn the CS field controller on. Plug the GEV234 cable into the USB port of the PC. For PCs with Windows XP operating system:
ActiveSync starts up automatically. If does not start automatically, start ActiveSync. If not already installed, run the ActiveSync installation program. Allow USB connections inside the Connection Settings window of ActiveSync. Click Explore in ActiveySync.
The folders on the CS field controller are displayed under Mobile Devices. The folders of the data storage device can be found in Stor-
ageCard. For PCs with Windows Vista operating system:
Windows Mobile Device Center starts up automatically. If does not start automatically, start Windows Mobile Device Center. If not already installed, run the Windows Mobile Device Center installation program. CS10/CS15, Operation 41 CS10/CS15, Operation 3.2 Power Functions 42 Turning CS field controller on Power Options menu Press and hold power key (
) for 2 s.
CS field controller must have a power supply.
CS field controller must be on. Press and hold power key (
) for 2 s to open Power Options menu. Option Turn off Sleep Description Turn CS field controller off. Put CS field controller into sleep mode.
In sleep mode, CS field controller shuts down and reduces power consumption. Rebooting from sleep mode is quicker than a cold start after turning off. Lock keyboard Turn off touch screen Lock the keyboard. Option turns to Unlock keyboard. Disable touch screen. Option turns to Turn on touch screen. Option Reset Description Perform one of the following options:
Restart (restart Windows CE) Reset registry (reset Windows CE registry) Reset application (reset all application settings) Reset application and registry (reset all appli-
cations settings and Windows CE registry) CS10/CS15, Operation 43 CS10/CS15, Operation 3.3 3.3.1 Batteries Operating Principles 44 Charging / first-
time use Operation /
Discharging The battery must be charged prior to using it for the first time because it is deliv-
ered with an energy content as low as possible. The permissible temperature range for charging is between 0C to +40C/ +32F to +104F. For optimal charging, we recommend charging the batteries at a low ambient temperature of +10C to +20C/+50F to +68F if possible. It is normal for the battery to become warm during charging. Using the chargers recommended by Leica Geosystems, it is not possible to charge the battery if the temperature is too high. For new batteries or batteries that have been stored for a long time (> three months), it is effectual to make only one charge/discharge cycle. For Li-Ion batteries, a single discharging and charging cycle is sufficient. We recommend carrying out the process when the battery capacity indicated on the charger or on a Leica Geosystems product deviates significantly from the actual battery capacity available. The batteries can be operated from -20C to +55C/-4F to +131F. Low operating temperatures reduce the capacity that can be drawn; high oper-
ating temperatures reduce the service life of the battery. 3.3.2 Changing the Battery Insert and remove the battery step-
by-step 2 3 1 4 CS_010 Description 1.
Turn CS field controller over to gain access to the battery compartment. Push the slide fastener in the direction of the arrow with the open-lock symbol. Open the battery compartment. Pull the battery from the battery compartment. Place the battery into the battery compartment with the Leica logo facing to the top. 2. 3. 4. CS10/CS15, Operation 45 CS10/CS15, Operation 46 5. Description Close the battery compartment by pushing the slide fastener in the direction of the arrow with the close-lock symbol. 3.3.3 Charging the Battery Charge battery step-by-step A B CS_024 1. 2. Description Connect the GEV235 power adapter or GDC221 car adapter with the CS field controller (A) or the docking station (B) and an A/C plug. The power LED on the CS field controller switches on. When CS field controllers battery is fully charged the LED switches off again.
Refer to "LED indicators" for information about the power LED. CS10/CS15, Operation 47 CS10/CS15, Operation 48
Warning
Caution The following advice is only valid for battery charger, power adapter and car adapter. Touching live components Using the product after incorrect attempts were made to carry out repairs If you open the product, either of the following actions may cause you to receive an electric shock. Precautions:
Do not open the product. Only Leica Geosystems authorised service workshops are entitled to repair these products. The following advice is only valid for batteries, power adapter or docking station. The product is not designed for use under wet and severe conditions. If unit becomes wet it may cause you to receive an electric shock. Precautions:
Use the product only in dry environments, for example in buildings or vehicles. Protect the product against humidity. If the product becomes humid, it must not be used!
Working with the Memory Device Keep the card dry. Use it only within the specified temperature range. Do not bend the card. Protect the card from direct impacts. Failure to follow these instructions could result in data loss and/or permanent damage to the card. 3.4
Insert and remove a CompactFlash card step-by-step 2 3 4 C F S D 1 CS_017 CS10/CS15, Operation 49 CS10/CS15, Operation 50 Description 1.
The CompactFlash card is inserted into a slot inside the top of the CS10/CS15. Refer to "Fixing the slot cover to the CS step-by-step". Loosen the screws inside the slot cover on top of the CS10/CS15 using the screwdriver end of the stylus. Detach the slot cover from the CS10/CS15. Slide the card firmly into the slot until it clicks into position.
Do not force the card into the slot. The card must be held with the contacts facing the slot. Attach the slot cover and tighten the screws. To remove the card, detach the slot cover of the CS10/CS15. Press the eject button next to the card slot twice. Remove the CompactFlash card and attach the slot cover. 2. 3. 4. 5. 6. 7. 8. Insert and remove an SD card step-by-
step 3 4 C F S D 2 1 CS_018 Description 1.
The SD card is inserted into a slot inside the top of the CS10/CS15. Refer to "Fixing the slot cover to the CS step-by-step". Loosen the screws inside the slot cover on top of the CS10/CS15 using the screwdriver end of the stylus. Detach the slot cover from the CS10/CS15. Slide the card firmly into the slot until it clicks into position.
Do not force the card into the slot. The card must be held with the contacts facing the slot. 2. 3. 4. CS10/CS15, Operation 51 CS10/CS15, Operation 52 Description Attach the slot cover and tighten the screws. To remove the card, detach the slot cover of the CS10/CS15. Gently press the top of the card to release it from the slot. Remove the SD card and attach the slot cover. 5. 6. 7. 8. 3.5 LED Indicators on CS10/CS15 LED indicators Description The CS field controller has Light Emitting Diode indicators. They indicate the basic field controller status. Diagram OK Fn a CS_023 b a) Bluetooth LED b) Power LED CS10/CS15, Operation 53 CS10/CS15, Operation 54 Description of the LEDs IF the Bluetooth LED is green Power LED purple blue flashing blue off green flashing green yellow THEN Bluetooth is in data mode and ready for connecting. Bluetooth is connecting. Bluetooth has connected. data is being transferred power is off. power is okay. power is okay. The battery is being charged. power is low. The remaining time for which enough power is available depends on the use of wireless modules, the temperature and the age of the battery. flashing yellow power is low. The remaining time for which enough power is available depends on the use of wireless modules, the temperature and the age of the battery. The battery is being charged. power is very low. The battery should be changed. red IF the is flashing red THEN power is very low. The battery is being charged. CS10/CS15, Operation 55 CS10/CS15, Operation 3.6 Using the Digital Camera 56 Overview Taking a picture step-by-step Both CS field controllers are equipped with a digital camera located at the underside
(refer to "1.4 CS Components"). If a hand strap or pole holder plate is mounted, the camera view is not limited. The camera application can be started from the desktop icon Camera or from the Start menu Start - Programs - Camera. Description Aim the camera to the desired target. Check the view at the display. Press OK or click Capture to take the picture.
Capture changes to Save. Press OK again or click Save to open the Save As dialog. Click Discard to reject the picture. 1. 2. 3. 4. 5. Storing a picture step-by-step Description
The Save As dialog is Windows CE standard and allows to name the picture, choose the location or to create a folder. 1. 2. 3. 4. Description Browse to the desired folder or create a new one. Name the picture. Press OK to save it and return to the camera view. Press Cancel to reject the picture and to return to the camera view without saving the picture. CS10/CS15, Operation 57 CS10/CS15, Care and Transport 4 4.1 Care and Transport Transport 58 Transport in a road vehicle Never carry the product loose in a road vehicle, as it can be affected by shock and vibration. Always carry the product in its transport container and secure it. Shipping When transporting the product by rail, air or sea, always use the complete original Leica Geosystems packaging, transport container and cardboard box, or its equiva-
lent, to protect against shock and vibration. Shipping, transport of batteries When transporting or shipping batteries, the person in charge of the product must ensure that the applicable national and international rules and regulations are observed. Before transportation or shipping, contact your local passenger or freight transport company. 4.2 Product Li-Ion batteries Storage Respect the temperature limits when storing the equipment, particularly in summer if the equipment is inside a vehicle. Refer to "6 Technical Data" for information about temperature limits. Refer to "6 Technical Data" for information about storage temperature range. At the recommended storage temperature range, batteries containing a 10% to 50% charge can be stored for up to one year. After this storage period the batteries must be recharged. Remove batteries from the product and the charger before storing. After storage recharge batteries before using. Protect batteries from damp and wetness. Wet or damp batteries must be dried before storing or use. A storage temperature range of -20C to +30C/-4F to 86F in a dry environ-
ment is recommended to minimise self-discharging of the battery. CS10/CS15, Care and Transport 59 CS10/CS15, Care and Transport 4.3 Cleaning and Drying 60 Product and acces-
sories Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth with water or pure alcohol. Do not use other liquids; these may attack the polymer components. Damp products Dry the product, the transport container, the foam inserts and the accessories at a temperature not greater than 40C/104F and clean them. Do not repack until every-
thing is dry. Always close the transport container when using in the field. Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables. Connectors with dust caps Wet connectors must be dry before attaching the dust cap. 5 5.1 Description Safety Directions General Introduction The following directions enable the person responsible for the product, and the person who actually uses the equipment, to anticipate and avoid operational hazards. The person responsible for the product must ensure that all users understand these directions and adhere to them. CS10/CS15, Safety Directions 61 CS10/CS15, Safety Directions 5.2 Intended Use 62 Permitted use Adverse use Remote control of product. Data communication with external appliances. Use of the product without instruction. Use outside of the intended limits. Disabling safety systems. Removal of hazard notices. Opening the product using tools, for example screwdriver, unless this is permitted for certain functions. Modification or conversion of the product. Use after misappropriation. Use of products with recognisable damages or defects. Use with accessories from other manufacturers without the prior explicit approval of Leica Geosystems. Inadequate safeguards at the working site, for example when measuring on roads. Controlling of machines, moving objects or similar monitoring application without additional control- and safety installations. Warning Adverse use can lead to injury, malfunction and damage. It is the task of the person responsible for the equipment to inform the user about hazards and how to counteract them. The product is not to be operated until the user has been instructed on how to work with it. CS10/CS15, Safety Directions 63 CS10/CS15, Safety Directions 5.3 Limits of Use 64 Environment Danger
Environment Suitable for use in an atmosphere appropriate for permanent human habitation: not suitable for use in aggressive or explosive environments. Local safety authorities and safety experts must be contacted before working in hazardous areas, or close to electrical installations or similar situations by the person in charge of the product. The following advice is only valid for battery charger, power adapter and car adapter. Suitable for use in dry environments only and not under adverse conditions. 5.4 Responsibilities Manufacturer of the product Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica Geosys-
tems, is responsible for supplying the product, including the user manual and original accessories, in a safe condition. Manufacturers of non Leica Geosys-
tems accessories The manufacturers of non Leica Geosystems accessories for the product are respon-
sible for developing, implementing and communicating safety concepts for their products, and are also responsible for the effectiveness of those safety concepts in combination with the Leica Geosystems product. Person in charge of the product The person in charge of the product has the following duties:
To understand the safety instructions on the product and the instructions in the user manual. To be familiar with local regulations relating to safety and accident prevention. To inform Leica Geosystems immediately if the product and the application becomes unsafe. To ensure that the national laws, regulations and conditions for the operation of radio transmitters are respected. CS10/CS15, Safety Directions 65 CS10/CS15, Safety Directions Warning The person responsible for the product must ensure that it is used in accordance with the instructions. This person is also accountable for the training and the deployment of personnel who use the product and for the safety of the equipment in use. 66 5.5 Warning Danger Hazards of Use The absence of instruction, or the inadequate imparting of instruction, can lead to incorrect or adverse use, and can cause accidents with far-reaching human, material, financial and environmental consequences. Precautions:
All users must follow the safety directions given by the manufacturer and the direc-
tions of the person responsible for the product. Because of the risk of electrocution, it is dangerous to use poles and extensions in the vicinity of electrical installations such as power cables or electrical railways. Precautions:
Keep at a safe distance from electrical installations. If it is essential to work in this environment, first contact the safety authorities responsible for the electrical instal-
lations and follow their instructions. CS10/CS15, Safety Directions 67 CS10/CS15, Safety Directions Warning 68 During dynamic applications, for example stakeout procedures there is a danger of accidents occurring if the user does not pay attention to the environmental condi-
tions around, for example obstacles, excavations or traffic. Precautions:
The person responsible for the product must make all users fully aware of the existing dangers. Inadequate securing of the working site can lead to dangerous situations, for example in traffic, on building sites, and at industrial installations. Precautions:
Always ensure that the working site is adequately secured. Adhere to the regulations governing safety and accident prevention and road traffic. If computers intended for use indoors are used in the field there is a danger of elec-
tric shock. Precautions:
Adhere to the instructions given by the computer manufacturer regarding field use with Leica Geosystems products. If the accessories used with the product are not properly secured and the product is subjected to mechanical shock, for example blows or falling, the product may be damaged or people can sustain injury. Warning Warning Caution Warning Warning Caution Precautions:
When setting-up the product, make sure that the accessories are correctly adapted, fitted, secured, and locked in position. Avoid subjecting the product to mechanical stress. If the product is used with accessories, for example masts, staffs, poles, you may increase the risk of being struck by lightning. Precautions:
Do not use the product in a thunderstorm. Using a battery charger not recommended by Leica Geosystems can destroy the batteries. This can cause fire or explosions. Precautions:
Only use chargers recommended by Leica Geosystems to charge the batteries. During the transport, shipping or disposal of batteries it is possible for inappropriate mechanical influences to constitute a fire hazard. Precautions:
Before shipping the product or disposing of it, discharge the batteries by running the product until they are flat. When transporting or shipping batteries, the person in charge of the product must ensure that the applicable national and international rules and regulations are CS10/CS15, Safety Directions 69 CS10/CS15, Safety Directions 70 Warning Warning
Warning observed. Before transportation or shipping contact your local passenger or freight transport company. High mechanical stress, high ambient temperatures or immersion into fluids can cause leakage, fire or explosions of the batteries. Precautions:
Protect the batteries from mechanical influences and high ambient temperatures. Do not drop or immerse batteries into fluids. If battery terminals come in contact with jewellery, keys, metallised paper or other metals, short circuited battery terminals can overheat and cause injury or fire, for example by storing or transporting in pockets. Precautions:
Make sure that the battery terminals do not come into contact with metallic objects. The following advice is only valid for battery charger, power adapter and car adapter. If you open the product, either of the following actions may cause you to receive an electric shock. Touching live components Using the product after incorrect attempts were made to carry out repairs
Caution Warning Precautions:
Do not open the product. Only Leica Geosystems authorised service workshops are entitled to repair these products. The following advice is only valid for batteries, power adapter or docking station. The product is not designed for use under wet and severe conditions. If unit becomes wet it may cause you to receive an electric shock. Precautions:
Use the product only in dry environments, for example in buildings or vehicles. Protect the product against humidity. If the product becomes humid, it must not be used!
If the product is improperly disposed of, the following can happen:
If polymer parts are burnt, poisonous gases are produced which may impair health. If batteries are damaged or are heated strongly, they can explode and cause poisoning, burning, corrosion or environmental contamination. By disposing of the product irresponsibly you can enable unauthorised persons to use it in contravention of the regulations, exposing themselves and third CS10/CS15, Safety Directions 71 CS10/CS15, Safety Directions 72 parties to the risk of severe injury and rendering the environment liable to contamination. Precautions:
The product must not be disposed with household waste. Dispose of the product appropriately in accordance with the national regulations in force in your country. Always prevent access to the product by unauthorised personnel. Warning Product-specific treatment and waste management information can be downloaded from the Leica Geosystems home page at http://www.leica-
geosystems.com/treatment or received from your Leica Geosystems dealer. Only Leica Geosystems authorised service workshops are entitled to repair these products. 5.6 Electromagnetic Compatibility EMC Description Warning The term Electromagnetic Compatibility is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radiation and elec-
trostatic discharges are present, and without causing electromagnetic disturbances to other equipment. Electromagnetic radiation can cause disturbances in other equipment. Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment may be disturbed. The product is a class A product when operated with the internal batteries. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures (remove internal batteries and power the product directly with a power cable). There is a risk that disturbances may be caused in other equipment if the product is used with accessories from other manufacturers, for example field computers, personal computers, two-way radios, non-standard cables or external batteries. Caution CS10/CS15, Safety Directions 73 CS10/CS15, Safety Directions 74 Caution Warning Precautions:
Use only the equipment and accessories recommended by Leica Geosystems. When combined with the product, they meet the strict requirements stipulated by the guidelines and standards. When using computers and two-way radios, pay attention to the information about electromagnetic compatibility provided by the manufac-
turer. Disturbances caused by electromagnetic radiation can result in erroneous measure-
ments. Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that the product may be disturbed by intense electromagnetic radiation, for example, near radio transmitters, two-way radios or diesel generators. Precautions:
Check the plausibility of results obtained under these conditions. If the product is operated with connecting cables attached at only one of their two ends, for example external supply cables, interface cables, the permitted level of electromagnetic radiation may be exceeded and the correct functioning of other products may be impaired. Precautions:
While the product is in use, connecting cables, for example product to external battery, product to computer, must be connected at both ends. Radios or digital cellular phones Warning Use of product with radio or digital cellular phone devices:
Electromagnetic fields can cause disturbances in other equipment, in installations, in medical devices, for example pacemakers or hearing aids and in aircraft. It can also affect humans and animals. Precautions:
Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment can be disturbed or that humans or animals can be affected. Do not operate the product with radio or digital cellular phone devices in the vicinity of filling stations or chemical installations, or in other areas where an explosion hazard exists. Do not operate the product with radio or digital cellular phone devices near to medical equipment. Do not operate the product with radio or digital cellular phone devices in aircraft. CS10/CS15, Safety Directions 75 CS10/CS15, Safety Directions 5.7
Warning FCC Statement, Applicable in U.S. 76 The greyed paragraph below is only applicable for products without radio. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, can cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the instrument. Connect the equipment into an outlet on a circuit different from that to which the instrument is connected. Consult the dealer or an experienced radio/TV technician for help. Warning Labelling CS10 Labelling CS15 Changes or modifications not expressly approved by Leica Geosystems for compli-
ance could void the user's authority to operate the equipment. CS_014 CS_015 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC-ID: . - . Bluetooth QPL: . 25 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC-ID: . - . Bluetooth QPL: . 25 CS10/CS15, Safety Directions 77 CS10/CS15, Safety Directions Labelling GS05, GS06 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. 78 Labelling internal battery GEB211, GEB212 CS_012 GEB_001 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ... ................. ..................... ............................... ................................................................................ .............. ...................... ......... ................... ..................... 6 6.1 Technical Data CS10/CS15 Technical Data Design Glass reinforced polymer housing with optional integrated battery and radio modem. Control unit CS10 Display:
Keyboard:
Touch screen:
Sound:
Digital camera:
CS15 Display:
Keyboard:
Touch screen:
Sound:
VGA (480 x 640 pixels), graphics capable LCD, illumination, touch screen, colour 26 keys, illumination Toughened film on glass Integrated sealed speaker and microphone Resolution: 1600 x 1200 pixels, fixed focus lens, image capture: JPEG VGA (640 x 480 pixels), graphics capable LCD, illumination, touch screen, colour 65 keys including 12 function keys, illumination Toughened film on glass Integrated sealed speaker and microphone CS10/CS15, Technical Data 79 CS10/CS15, Technical Data 80 Digital camera:
Resolution: 1600 x 1200 pixels, fixed focus lens, image capture: JPEG Dimensions Weight Recording Power Type CS10 CS15 Length [m]
0.200 0.245 Width [m]
0.102 0.125 Thickness [m]
0.045 0.045 Type CS10, with GEB211 or GEB212 CS15, with GEB211 or GEB212 Weight [kg]/[lbs]
0.720/1.587 0.870/1.918 Data can be recorded on the SD card, CompactFlash card, USB stick or in the internal memory. Type CS10/CS15 2.0 Consumption [W]
External supply voltage Nominal voltage 12 V DC (
Voltage range 10.5 V-28 V
) Internal battery Type Battery Voltage Capacity CS10/CS15 Li-Ion 7.4 V GEB212: 2.6 Ah Operating time, typical*
10 h
* Operating time depends on use of wireless communication devices. Environmental specifications Temperature Type CS10/CS15 -30 to +60 Operating temperature [C]
Colour display: -10 to +60
-20 to +55 Storage temperature [C]
-40 to +80
-40 to +70 Internal battery Protection against water, dust and sand Type CS10/CS15 IP67 (IEC60529) Protection Dust tight Waterproof to 1 m temporary immersion CS10/CS15, Technical Data 81 CS10/CS15, Technical Data Humidity 82 Protection Type CS10/CS15 Up to 100 %
The effects of condensation are to be effectively counteracted by periodically drying out CS10/CS15. Interfaces Type CS10/CS15 LEMO port or RS232 DSUB9 USB Host LEMO port or USB A USB OTG LEMO port, USB Mini-AB or docking station contacts Bluetooth WLAN Class 2 IEEE 802.11b/g Data format for RS232 The default values are:
Baud rate:
Parity:
Terminator:
Data bits:
Stop bits:
115200 None CR/LF 8 1 Ports Type 8 pin LEMO-1 DSUB9 USB A Host CS10/CS15 For power and/or communication For communication USB Mini Docking station contacts For power and/or commu-
nication CS10/CS15, Technical Data 83 CS10/CS15, Technical Data 6.2 6.2.1 GS05/GS06 Technical Data Tracking Characteristics 84 Instrument tech-
nology SmartTrack+
Satellite reception Single frequency Instrument chan-
nels GS05/GS06:
Up to 14 channels continuous tracking on L1 (GPS); up to 14 channels continuous tracking on L1 (GLONASS); one channel tracking SBAS.
Depending on the satellite systems and signals configured, a maximum number of 14 channels is allocated. Supported codes and phases GPS Type GS05/GS06 L1 Carrier phase, C/A-code GLONASS Type GS05/GS06 L1 Carrier phase, C/A-code
Carrier phase and code measurements on L1 (GPS) are fully independent with AS on or off. Satellites tracked GS05/GS06:
Up to 14 simultaneously on L1 (GPS) + up to 14 simultaneously on L1 (GLONASS) + up to one SBAS CS10/CS15, Technical Data 85 86 CS10/CS15, Technical Data 6.2.2
Accuracy Accuracy is dependent upon various factors including the number of satellites tracked, constellation geometry, observation time, ephemeris accuracy, ionospheric disturbance, multipath and resolved ambiguities. The following accuracies, given as root mean square, are based on measurements processed using LGO and on real-time measurements. The use of multiple GNSS systems can increase accuracy by up to 30% relative to GPS only. Differential code The baseline precision of a differential code solution for static and kinematic surveys is 40 cm. Differential phase in post-processing Static 10 mm + 2 ppm Kinematic 20 mm + 2 ppm 6.2.3 Technical Data Description and use Dimensions The table gives a description and the intended use of the GS05/GS06. Type GS05 GS06 Type GS05 with CS10 GS06 with CS15 Description L1 GPS, GLONASS SmartTrack+
antenna. L1 GPS, GLONASS SmartTrack+
antenna. Use With CS10 field controller. With CS15 field controller. Length [m]
0.290 Width [m]
0.102 Thickness [m]
0.045 0.290 0.125 0.045 Connector 5 pin interface port CS10/CS15, Technical Data 87 CS10/CS15, Technical Data 88 Weight Type GS05 with CS10 and GEB211/GEB212 GS06 with CS15 and GEB211/GEB212 Weight [kg]/[lbs]
0.900/1.984 1.045/2.304 Power Power consumption:
External supply voltage:
0.5 W typically, 45 mA Nominal 12 V DC (
), voltage range 5 V-28 V DC Electrical data Type Voltage Current Frequency Gain Noise Figure GS05/GS06
GPS L1 1575.42 MHz GLONASS L1 1602.5625 MHz-1611.5 MHz Typically 27 dBi Typically < 2 dBi Environmental specifications Temperature Operating temperature [C]
-30 to +60 Storage temperature [C]
-40 to +80 Protection against water, dust and sand Protection IP67 (IEC 60529) Dust tight Protected against water jets Waterproof to 1 m temporary immersion Humidity Protection Up to 100 %
The effects of condensation are to be effectively counteracted by periodically drying out the antenna. CS10/CS15, Technical Data 89 CS10/CS15, Technical Data 6.3 Antennas Technical Data 90 Description and use The table gives a description and the intended use of the antenna. Type AS05 Description L1 GPS, GLONASS SmartTrack+
antenna with built-in ground plane. Use With CS10/GS05, CS15/GS06. Dimensions Connector Mounting Weight Type Height Diameter AS05 6.2 cm 17.0 cm AS05:
AS05:
AS05:
TNC female 5/8" Whitworth 0.4 kg Electrical data Type Voltage Current Frequency Gain (typically) Noise Figure (typically) AS05 4.5 V to 18 V DC 35 mA typical GPS L1 1575.42 MHz GLONASS L1 1602.5625 MHz-1611.5 MHz 27 dBi
< 2 dBi Environmental specifications Temperature Type AS05 Operating temperature [C] Storage temperature [C]
-40 to +70
-55 to +85 Protection against water, dust and sand Type AS05 Protection IP67 (IEC 60529) Dust tight Protected against water jets CS10/CS15, Technical Data 91 CS10/CS15, Technical Data 92 Type Humidity Type AS05 Protection Waterproof to 1 m temporary immersion Protection Up to 100 %
The effects of condensation are to be effectively counter-
acted by periodically drying out the antenna. Cable length Separation distance from instrument ... GS05/GS06 to antenna Supplied cable lengths [m]
AS05 1.2 6.4 6.4.1 Conformity to National Regulations CS10 Conformity to national regula-
tions FCC Part 15 (applicable in US) Hereby, Leica Geosystems AG, declares that the product CS10 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity can be consulted at http://www.leica-
geosystems.com/ce. Class 2 equipment according European Directive 1999/5/EC
(R&TTE) for which following EEA Member States apply restrictions on the placing on the market or on the putting into service or require authorisation for use:
France Italy Norway (if used in the geographical area within a radius of 20km from the centre of Ny-lesund) The conformity for countries with other national regulations not covered by the FCC part 15 or European directive 1999/5/EC has to be approved prior to use and operation. CS10/CS15, Technical Data 93 CS10/CS15, Technical Data Frequency band Output power Type CS10, Bluetooth CS10, WLAN Type CS10, Bluetooth CS10, WLAN (802.11b) CS10, WLAN (802.11g) 6 Mbit/s-36 Mbit/s CS10, WLAN (802.11b) 48 Mbit/s-56 Mbit/s 94 Frequency band [MHz]
2402 - 2480 2400 - 2484 Output power [mW]
2.5 50 50 31.6 Antenna Type Antenna Gain [dBi]
Connector CS10, Bluetooth CS10, WLAN Integrated antenna Integrated antenna
Frequency band [MHz]
Type GS05 Antenna Gain [dBi]
Connector
Internal GNSS antenna element (receive only)
Frequency band [MHz]
CS10/CS15, Technical Data 95 CS10/CS15, Technical Data 6.4.2 CS15 96 Conformity to national regula-
tions FCC Part 15 (applicable in US) Hereby, Leica Geosystems AG, declares that the product CS15 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity can be consulted at http://www.leica-
geosystems.com/ce. Class 2 equipment according European Directive 1999/5/EC
(R&TTE) for which following EEA Member States apply restrictions on the placing on the market or on the putting into service or require authorisation for use:
France Italy Norway (if used in the geographical area within a radius of 20km from the centre of Ny-lesund) The conformity for countries with other national regulations not covered by the FCC part 15 or European directive 1999/5/EC has to be approved prior to use and operation. Frequency band Type CS15, Bluetooth CS15, WLAN Frequency band [MHz]
2402 - 2480 2400 - 2484 Output power Type CS15, Bluetooth CS15, WLAN (802.11b) CS15, WLAN (802.11g) 6 Mbit/s-36 Mbit/s CS15, WLAN (802.11b) 48 Mbit/s-56 Mbit/s Output power [mW]
2.5 50 50 31.6 Antenna Type Antenna Gain [dBi]
Connector CS15, Bluetooth CS15, WLAN GS06
Integrated antenna Integrated antenna Internal GNSS antenna element (receive only)
Frequency band [MHz]
CS10/CS15, Technical Data 97 CS10/CS15, International Limited Warranty, Software Licence Agreement 7 International Limited Warranty, Software Li-
cence Agreement 98 International Limited Warranty Software Licence Agreement This product is subject to the terms and conditions set out in the International Limited Warranty which you can download from the Leica Geosystems home page at http://www.leica-geosystems.com/internationalwarranty or collect from your Leica Geosystems distributor. The foregoing warranty is exclusive and is in lieu of all other warranties, terms or conditions, express or implied, either in fact or by operation of law, statutory or otherwise, including warranties, terms or conditions of merchanta-
bility, fitness for a particular purpose, satisfactory quality and non-infringement, all which are expressly disclaimed. This product contains software that is preinstalled on the product, or that is supplied to you on a data carrier medium, or that can be downloaded by you online according to prior authorisation from Leica Geosystems. Such software is protected by copy-
right and other laws and its use is defined and regulated by the Leica Geosystems Software Licence Agreement, which covers aspects such as, but not limited to, Scope of the Licence, Warranty, Intellectual Property Rights, Limitation of Liability, Exclusion of other Assurances, Governing Law and Place of Jurisdiction. Please make sure, that at any time you fully comply with the terms and conditions of the Leica Geosystems Software Licence Agreement. Such agreement is provided together with all products and can also be referred to and downloaded at the Leica Geosystems home page at http://www.leica-
geosystems.com/swlicense or collected from your Leica Geosystems distributor. You must not install or use the software unless you have read and accepted the terms and conditions of the Leica Geosystems Software Licence Agreement. Installa-
tion or use of the software or any part thereof, is deemed to be an acceptance of all the terms and conditions of such Licence Agreement. If you do not agree to all or some of the terms of such Licence Agreement, you must not download, install or use the software and you must return the unused software together with its accompa-
nying documentation and the purchase receipt to the distributor from whom you purchased the product within ten (10) days of purchase to obtain a full refund of the purchase price. CS10/CS15, International Limited Warranty, Software Licence Agreement 99 CS10/CS15, Pin Assignments and Sockets Appendix A Pin Assignments and Sockets 100 Description Some applications require knowledge of the pin assignments for the CS10/CS15 ports. In this chapter, the pin assignments and sockets for the ports of the CS10/CS15 are explained. Ports at the instru-
ment bottom panel
- DSUB9 connector Ports at the instru-
ment bottom panel
- Lemo connector CS_022 a b c a) DSUB9 port b) USB Mini port c) USB A Host port CS_021 a b a) Lemo port (USB and serial) b) USB A Host port Pin assignments for RS232 serial port 1 2 3 4 5 6 7 8 9 PIN_002 Pin assignments for 8 pin LEMO-1 1 8 7 6 2 3 4 5 PIN_001 Pin 1 2 3 4 5 6 7 8 9 Pin 1 2 3 4 5 Signal Name NC RxD TxD NC GND NC RTS CTS NC Signal Name USB_D+
USB_D-
GND RxD TxD Function Not connected RS232, receive data RS232, transmit data Not connected Signal Ground Not connected RS232, request to send RS232, clear to send Not connected Function USB data line USB data line Signal ground RS232, receive data RS232, transmit data Direction
In Out
Out In
Direction In or out In or out
In Out CS10/CS15, Pin Assignments and Sockets 101 CS10/CS15, Pin Assignments and Sockets Pin 6 7 8 Signal Name ID PWR TRM_ON/USB_ID Function Identification pin Power input, 10.5 V-28 V RS232, general purpose signal 102 Direction In or out In In or out Sockets 9 pin RS232:
8 pin LEMO-1:
RS232, 9 pin, DE9 LEMO-1, 8 pin, LEMO EGI.1B.308.CLN Index A ActiveSync .......................................................... 37 Antennas Operating Temperature .................................. 91 Storing Temperature ...................................... 91 Type .............................................................. 90 B Batteries Battery Bluetooth Charge in CS10/CS15 ..................................... 47 Charging, first-time use ................................. 44 Operation, Discharging .................................. 44 Change in CS10/CS15 ..................................... 45 Charge in CS10/CS15 ..................................... 47 Storage temperature ..................................... 81 LED on CS10 .................................................. 53 LED on CS15 .................................................. 53 CS10 C CompactFlash card CS10/CS15, Index Insert .............................................................49 Memory device ...............................................17 Remove ..........................................................49 Connector GS05 ..............................................................87 GS06 ..............................................................87 Connector, antennas ...........................................90 CS Available models ............................................12 Display foil .....................................................29 Docking Station ........................................23, 36 Firmware for all CS models .............................14 Lock keyboard ................................................42 Operating principles .......................................28 Power Options menu ......................................42 System components .......................................11 Unlock keyboard .............................................42 Operating temperature ...................................81 Status ............................................................53 Storage temperature ......................................81 103 CS10/CS15, Index 104 CS15 Underside ...................................................... 20 Upside ........................................................... 19 Operating temperature .................................. 81 Status ............................................................ 53 Storage temperature ..................................... 81 Underside ...................................................... 22 Upside ........................................................... 21 D Data transfer ...................................................... 18 Description of the system ................................... 11 Digital Camera .................................................... 56 Dimensions Antennas ....................................................... 90 SmartAntenna ................................................ 87 Display foil .......................................................... 29 Docking Station Components .................................................. 23 Mounting ....................................................... 36 Documentation ..................................................... 4 Drive PC card, on office computer ........................... 18 E Electrical Data GS05 ..............................................................88 GS06 ..............................................................88 Electrical data, antennas .....................................91 Environmental specifications Antenna .........................................................91 GS05 ..............................................................89 GS06 ..............................................................89 F FCC Statement ....................................................76 G GEB211 (internal battery) GEB212 (internal battery) Operating temperature ...................................81 GS05 GS06 Operating temperature ...................................81 Operating Temperature ..................................89 Storage Temperature .....................................89 Operating Temperature ..................................89 Storage Temperature .....................................89 H Hand strap .......................................................... 31 Handheld GNSS ................................................... 34 I Indicators, LED Insert CS10 .............................................................. 53 CS15 .............................................................. 53 CompactFlash card ......................................... 49 SD card .......................................................... 51 Intended Use ...................................................... 62 Internal memory Memory device ......................................... 17, 17 International Limited Warranty ............................ 98 Caps Lock .......................................................26 Description of ................................................25 ENTER key ......................................................26 ESC key ..........................................................26 Favourites ......................................................27 Fn key ............................................................26 Function keys .................................................25 Home .............................................................27 Hot keys ........................................................26 Numeric keys .................................................26 OK .................................................................27 ON/OFF ..........................................................27 SPACE key ......................................................26 L Labelling K Keyboard Keys CS10 Graphical overview ................................ 24 CS15 Graphical overview ................................ 25 Operating principles ....................................... 28 LED Alpha keys ..................................................... 26 Arrow keys .................................................... 27 Backspace key ............................................... 26 CS10 ..............................................................77 CS15 ..............................................................77 GS05 ..............................................................78 GS06 ..............................................................78 CS10, description ...........................................44 CS15, description ...........................................54 Light Emitting Diode CS10/CS15, Index 105 CS10/CS15, Index 106 CS10 .............................................................. 53 CS15 .............................................................. 53 GS05 ..............................................................88 GS06 ..............................................................88 Li-Ion battery Storage .......................................................... 59 M Memory device Available ........................................................ 17 Microsoft ActiveSync ........................................... 37 Mount, antennas ................................................ 90 O Operating Temperature Antennas ....................................................... 91 CS10 .............................................................. 81 CS15 .............................................................. 81 GEB211 (internal battery) .............................. 81 GEB212 (internal battery) .............................. 81 GS05 ............................................................. 89 GS06 ............................................................. 89 P PC card drive on office computer ........................ 18 Pin Assginment ................................................. 100 Power Power LED CS10 ..............................................................53 CS15 ..............................................................53 Power supply .......................................................16 R Radio Modem Available radios ..............................................13 Recording ............................................................80 Remove CompactFlash card .........................................49 SD card ..........................................................51 Reset Options ..........................................................43 Responsibilities ...................................................65 S Safety Directions .................................................61 SD card Insert .............................................................51 Memory device ...............................................17 Remove ..........................................................51 Slot Cover ...........................................................33 Socket .............................................................. 100 Software Upload ........................................................... 14 Software Licence Agreement .............................. 98 Specifications, environmental Antennas ....................................................... 91 GS05 ............................................................. 89 GS06 ............................................................. 89 Status, CS10 ....................................................... 53 Status, CS15 ....................................................... 53 Storage Temperature CS10 .............................................................. 81 CS15 .............................................................. 81 For internal battery GEB211 ........................... 81 For internal battery GEB212 ........................... 81 GS05 ............................................................. 89 GS06 ............................................................. 89 Storing Temperature Antennas ....................................................... 91 GS05 .............................................................84 GS06 .............................................................84 Dimensions ....................................................80 Display and keyboard .....................................79 Environmental specifications ..........................81 Interface ........................................................82 Internal battery GEB211 .................................81 Internal battery GEB212 .................................81 Ports ..............................................................83 Power supply ..................................................80 Weight ...........................................................80 Temperature range Product, drying ...............................................60 Temperature, charging internal battery ...............44 Touch screen Turn off ........................................................42 Turn on .........................................................42 Touch Screen, operating principles ......................28 Transfer data ......................................................18 T Technical Data CS10 ............................................................. 79 CS15 ............................................................. 79 U Upload software ..................................................14 USB stick Memory device ...............................................17 CS10/CS15, Index 107 CS10/CS15, Index User Interface ..................................................... 24 User Manual Validity of ........................................................ 4 108 W Weight Antennas ....................................................... 90 GS05 ............................................................. 88 GS06 ............................................................. 88 Windows CE Reset registry ................................................ 43 Restart .......................................................... 43 Windows Mobile Device Center ........................... 37 WLAN ................................................................. 12 CS10/CS15, Index 109 Total Quality Management: Our commitment to total customer satisfaction. Leica Geosystems AG, Heerbrugg, Switzerland, has been certified as being equipped with a quality system which meets the Internation Standards of Quality Management and Quality Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001). Ask your local Leica Geosystems dealer for more information about our TQM program. Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 www.leica-geosystems.com t x e t l a n g i r O i d n a l r e z t i w S n i d e t n i r P d n a l r e z t i w S
, g g u r b r e e H
, G A s m e t s y s o e G a c i e L 9 0 0 2
This product uses the FCC Data API but is not endorsed or certified by the FCC