| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 01 2011 | Microsoft Word - G_User_s manual.doc <C7F6C1A4> Acrobat Distiller 9.4.0 (Windows) |
| various | Users Manual | Users Manual | 3.27 MiB | May 01 2011 |
Order Number Test Report Number
: GETEC-C1-10-277
: GETEC-E3-10-158 FCC Part 15 subpart B Page 1 / 1 APPENDIX G
: USERS MANUAL EUT Type: LCD TV/Monitor FCC ID.: BEJ32LK430UA 2 LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX, DivX Certified and associated logos are registered trademarks of DivX, Inc. and are used under license. Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274 E N E G N L G I S H NOTE
y Plasma : Plasma TV LCD : LED LCD TV, LCD TV
y Image shown may differ from your TV.
y Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. OWNERS MANUAL LED LCD TV / LCD TV /
PLASMA TV Please read this manual carefully before operating the set and retain it for future reference. LED LCD TV MODELS 19LV2500 22LV2500 26LV2500 32LV2500 19LV2520 22LV2520 26LV2520 LCD TV MODELS 22LK330 26LK330 32LK330 32LK430 42LK430 32LV3500 37LV3500 42LV3500 47LV3500 55LV3500 32LV3520 42LV3520 32LK450 37LK450 42LK450 47LK450 42LK520 47LK520 55LK520 PLASMA TV MODELS 42PW340 50PW340 42PW350 50PW350 50PZ200 60PZ200 42PW350U 50PW350U 42PW350R 50PW350R P/NO : SAC34134216 (1012-REV03) www.lg.com IMPORTANT SAFETY INSTRUCTIONS 3 4 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
y Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
y CAUTION concerning the Power Cord TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
- TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Read these instructions. Keep these instructions. Heed all warning. Follow all instruction.
y Do not use this apparatus near water.
y Clean only with dry cloth.
y Do not block any ventilation openings. Install in accordance with the manufacturers instructions. E N E G N L G I S H E N E G N L G I S H
y Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
y Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
y Only use attachments/accessories specified by the manufacturer.
y Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
y Unplug this apparatus during lightning storms or when unused for long periods of time.
y Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
y Never touch this apparatus or antenna during a thunder or lightning storm.
y When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
(Can differ by country):
It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owners manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
y Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. IMPORTANT SAFETY INSTRUCTIONS 5 6 IMPORTANT SAFETY INSTRUCTIONS
y Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
y Grounding Ensure that you connect the earth ground wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker
y DISCONNECTING DEVICE FROM THE MAIN POWER The power outlet must remain readily accessed in the event the device needs to be unplugged.
y As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
y Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product.
y ANTENNAS Outdoor antenna grounding
(Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp Electric Service Equipment Ground Clamp NEC: National Electrical Code
y Cleaning Antenna Lead in Wire Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductor
(NEC Section 810-21) Power Service Grounding Electrode System
(NEC Art 250, Part H) When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.
y Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
y Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.
y If you smell smoke or other odors coming from the TV, unplug the power cord contact an authorized service center.
y Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.
y Keep the product away from direct sunlight. E N E G N L G I S H E N E G N L G I S H
y Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while youre viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
y Generated Sound Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-
speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.
y Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.
y Viewing 3D Imaging (For 3D TV)
- When viewing 3D imaging, watch the TV from an effective viewing angle and within the appropriate distance. If you exceed this viewing angle or distance, you may not be able to view the 3D imaging. Furthermore, the 3D imaging may not display if it is viewed while you are lying down.
- If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.
- Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.
- Pregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.
- Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.
- Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development.
- Warning for photosensitization seizure: Some viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV. Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV. Risk of photosensitization seizure can be reduced with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures.
- Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV.
- Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time.
- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving. IMPORTANT SAFETY INSTRUCTIONS 7 8 TABLE OF CONTENTS
y LCD If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TVs performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. TABLE OF CONTENTS 2 LICENSES 3 IMPORTANT SAFETY IN-
STRUCTIONS 8 TABLE OF CONTENTS 10 ASSEMBLING AND PREPARING 10 Unpacking 14 Optional Extras 15 22 22 22 28 30 31 Parts and buttons Lifting and moving the TV Setting up the TV
- Attaching the stand
- Mounting on a table
- Mounting on a wall
- Tidying cables 32 REMOTE CONTROL 36 WATCHING TV E N E G N L G I S H E N E G N L G I S H
- Connecting an antenna or basic cable
- Connecting a cable box 36 Connecting to an antenna or cable 36 36 37 Connecting to the AC/DC adapter 37 Turning the TV on for the first time 38 Watching TV 38 Managing channels 38 39 40 42 Using additional options
- Adjusting aspect ratio 42
- Changing AV modes 43
- Using the input list 43 44
- Locking the buttons on the TV (Child
- Setting up channels
- Using favorite channels
- Checking current program info Lock) 44 Using the quick menu 45 Using the customer support 45
- Testing the Picture / Sound
- Using the product or service informa-
45 tion 46 3D IMAGING (FOR 3D TV) 46 47 47 48 3D Technology
- When using 3D Glasses
- 3D Imaging Viewing Range Viewing 3D Imaging 50 ENTERTAINMENT 50 51 53 56 57 59
- Connecting USB storage devices
- Browsing files
- Viewing Videos
- DivX registration code
- Viewing Photos
- Listening to music 61 CUSTOMIZING TV SETTINGS The Main Menus 61 62 Customizing Settings
- CHANNEL Settings 62
- PICTURE Settings 63
- AUDIO Settings 67 68
- TIME Settings
- LOCK Settings 69 71
- OPTION Settings 73 MAKING CONNECTIONS 74 Connection Overview 75 Connecting to a HD receiver, DVD, or VCR player
- HDMI Connection
- DVI to HDMI Connection 75 75 TABLE OF CONTENTS 9 10 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. ENERGY AV MODE INPUT SAVING 1 4 7 LIST VOL 2 5 8 0 MARK FAV 3D MUTE TV 3 6 9 FLASHBK CH P A G E MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote control and batteries (AAA) Owners manual CD E N E G N L G I S H E N E G N L G I S H Polishing cloth1
(Depending on model) 1 Gently wipe the spots on the cabinet with the polishing cloth.
- Component Connection
- Composite Connection 76 76 77 Connecting to a PC 77
- HDMI Connection
- DVI to HDMI Connection 77 78
- RGB Connection 79 Connecting to an Audio System 79 79 Connecting to a USB 79 Connecting to a Headphone ( LCD ) 80 80
- Digital optical audio connection SIMPLINK Connection
- Activating and Using the SIMPLINK menus 81 MAINTENANCE 81 Cleaning Your TV 81 81 81 81
- Screen and frame
- Cabinet and stand
- Power cord Preventing Image burn or Burn-in on your TV screen 82 TROUBLESHOOTING 84 SPECIFICATIONS 90 IR CODES 92 EXTERNAL CONTROL DEVICE SETUP 100 OPEN SOURCE LICENSE ASSEMBLING AND PREPARING 11 12 ASSEMBLING AND PREPARING PW340, PW350, PW350U, PW350R, PZ200 series
(Other models)
(For 60PZ200) x 4 x 3 x 4 x 3 M4 x 26 M5 x 14.5 M4 x 28 M5 x 24 Screw for assembly Cable holder Power Cord holder 22LK330 Cable holder Protection cover Power Cord Power Cord Protection cover Ferrite core Protection cover tape
(Depending on model) 26/32LK330, LK430, LK450, LK520 series
(Except 47LK450, 47/55LK520) x 8 M4 x 20 Screw for assembly Screw for fixing Protection cover Power Cord 32LV2500, LV3500 series
(32LV2500)
(LV3500 series) x 8 x 8 M4 x 14 M4 x 12
(For 32LV2500, 32/37LV3500) E N E G N L G I S H E N E G N L G I S H CAUTION
y Do not use any unapproved items to ensure the safety and product life span.
y Any damages or injuries by using unapproved items are not covered by the warranty. Screw for assembly Composite gender cable Cable holder Screw for fixing 19/22/26LV2500, LV2520 series x 2 M4 x 16 M4 x 6 Screw for assembly Cable holder Power Cord AC/DC Adapter ASSEMBLING AND PREPARING 13 14 ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV. 3D Glasses D-sub 15 pin signal cable1
(AG-S230, AG-S250, AG-S270) 1 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable with a ferrite core to maintain standards compliance for the product. NOTE
y The items supplied with your product may vary depending on the model.
y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
y ( Plasma ) How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device]
10 mm (+/-5 mm)
[to the TV]
[Figure 1]
[Cross Section of Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
[to a wall plug]
[to the TV]
[Figure 2]
[Cross Section of Ferrite Core]
3 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to a wall plug]
[to the TV]
[Figure 3]
[Cross Section of Ferrite Core]
- If there is one ferrite core, follow as shown in Figure 1.
- If there are two ferrite cores, follow as shown in Figures 1 and 2.
- If there are three ferrite cores, follow as shown in Figures 1 and 3.
y ( LCD ) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. B B A A
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches) E N E G N L G I S H E N E G N L G I S H 20 ASSEMBLING AND PREPARING 22 ASSEMBLING AND PREPARING LK430 series Side Connection panel Screen USB input HDMI input Headphone output AV (Audio and Video) input N I B S U 3 N I R I O D U A O N O M L
O E D V I AV IN 2 E N E G N L G I S H CH VOL ENTER HOME INPUT Buttons2 Speakers Remote control Power indicator OPTICAL DIGITAL AUDIO OUT
(RGB/DVI) AUDIO IN RGB IN (PC) RS-232C IN (CONTROL & SERVICE)
/ DVI IN 2 1 COMPONENT IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I R A U D O I Y P B P R L R 2 1 ANTENNA /
CABLE IN Lifting and moving the TV Setting up the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand CAUTION
y Avoid touching the screen at all times, as this may result in damage to the screen. If you are not mounting the TV to a wall, use the following instructions to attach the stand. PW340, PW350, PW350U, PW350R, PZ200 series
y It is recommended to move the TV in the box or packing material that the TV originally came in.
y Before moving or lifting the TV, disconnect the power cord and all cables.
y When holding the TV, the screen should face away from you to prevent damage.
y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. E N E G N L G I S H 1 Lay the TV with the screen side down on a flat surface. CAUTION
y Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. Model 42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200 60PZ200 Screw for assembly M5 x 14.5 Number of screws 3 M5 x 24 3 Rear Connection panel
(See p.73)
y When transporting a large TV, there should be at least 2 people.
y When transporting the TV by hand, hold the TV as shown in the following illustration. Button2 Description
/ I INPUT HOME ENTER
- VOL +
v CH ^
Turns the power on or off. Changes the input source. Accesses the main menus, or saves your input and exits the menus. Selects the highlighted menu option or confirms an input. Adjusts the volume level. Scrolls through the saved channels. NOTE
y You can set the power indicator light to on or off by selecting OPTION in the main menus.
y When transporting the TV, do not expose the TV to jolts or excessive vibration.
y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. ASSEMBLING AND PREPARING 23 24 ASSEMBLING AND PREPARING 3 Secure the TV and the stand with the 4 screws. Model 42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200 60PZ200 Screw for assembly M4 x 26 Number of screws 4 M4 x 28 4 To detach the stand, 1 Lay the TV with the screen side down on a flat surface. 2 Remove the 4 screws and pull the stand away from the TV. Model 42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200 60PZ200 Screw for assembly M4 x 26 Number of screws 4 M4 x 28 4 32LV2500, LV3500 series 1 Lay the TV with the screen side down on a flat surface. CAUTION
y Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. Model Screw for assembly 32LV2500 M4 x 14 LV3500 series M4 x 12 Number of screws 4 4 To detach the stand, 1 Lay the TV with the screen side down on a flat surface. 2 Remove the 4 screws and pull the stand away from the TV. Model Screw for assembly 32LV2500 M4 x 14 LV3500 series M4 x 12 Number of screws 4 4 CAUTION
y Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. 3 Push the supplied protection cover into the opening at the bottom of the TV until it locks in place. Attach the protection cover tape.
- This will protect the opening from accumulating dust and dirt.
- When installing the wall mounting bracket, use the Protection cover. E N E G N L G I S H E N E G N L G I S H Protection cover tape Protection cover 3 Secure the TV and the stand with the 4 screws. Model Screw for assembly 32LV2500 M4 x 14 LV3500 series M4 x 12 Number of screws 4 4 CAUTION
y Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. ASSEMBLING AND PREPARING 25 26 ASSEMBLING AND PREPARING 22LK330 1 Lay the TV with the screen side down on a flat surface. CAUTION
y Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the TV as shown. To detach the stand, 1 Lay the TV with the screen side down on a flat surface. 2 Remove the screws and pull the stand away from the TV. E N E G N L G I S H E N E G N L G I S H 3 Push the supplied protection cover into the opening at the bottom of the TV until it locks in place. This will protect the opening from accumulating dust and dirt. When installing the wall mounting bracket, use the Protection cover. Protection cover 19/22/26LV2500, LV2520 series 1 Lay the TV with the screen side down on a flat surface. CAUTION
y Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. Screw for assembly M4 x 6 Number of screws 1 To detach the stand, 1 Lay the TV with the screen side down on a flat surface. 2 Remove the 2 screws and pull the stand away from the TV. Screw for assembly M4 x 16 Number of screws 2 3 Secure the TV and the stand with the 2 screws. Screw for assembly M4 x 16 Number of screws 2 CAUTION
y Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. 26/32LK330, LK430, LK450, LK520 series 1 Lay the TV with the screen side down on a flat surface. CAUTION
y Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. Screw for assembly M4 x 20 Number of screws 4 3 Secure the TV and the stand with the 4 screws. Screw for assembly M4 x 20 Number of screws 4 ASSEMBLING AND PREPARING 27 28 ASSEMBLING AND PREPARING To detach the stand, 1 Lay the TV with the screen side down on a flat surface. 2 Remove the 4 screws and pull the stand away from the TV. Screw for assembly M4 x 20 Number of screws 4 Mounting on a table 1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. Securing the TV to a table
(For 26/32LK330, 32/42LK430, 32/37/42LK450, 42LK520, 32LV2500, 32/37LV3500) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. 10 cm 10 cm
(4 inches) 10 cm 10 cm 3 Push the supplied protection cover into the opening at the bottom of the TV until it locks in place. This will protect the opening from accumulating dust and dirt. When installing the wall mounting bracket, use the Protection cover. E N E G N L G I S H E N E G N L G I S H 2 Connect the power cord to a wall outlet. CAUTION
y Do not place the TV near or on sources of heat, as this may result in fire or other damage. WARNING
y To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. NOTE
y Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20 20 CAUTION
y Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. Protection cover Securing the TV to a wall (optional) Using the Kensington security system (optional) Mounting on a wall Model ASSEMBLING AND PREPARING 29 30 ASSEMBLING AND PREPARING The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall. 10 cm
(4 inches) 10 cm 10 cm 10 cm NOTE
y The Kensington security system is optional. You can obtain additional accessories from your local dealer. E N E G N L G I S H E N E G N L G I S H Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Model VESA Standard screw Number of screws 4 Wall mount bracket
(optional) 42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200 400 x 400 M6 PSW400B, PSW400BG, DSW400BG Model 19/22/26LV2500 19/22/26LV2520 22/26LK330 VESA Standard screw Number of screws 4 Wall mount bracket
(optional) 100 x 100 M4 LSW100B, LSW100BG 60PZ200 600 x 400 M8 4 PSW600B 32LV2500 32LV3500 32LK330 32LK430 32LK450 200 x 100 M4 4 LSW100B, LSW100BG 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION
y Make sure that children do not climb on or hang on the TV. NOTE
y Use a platform or cabinet that is strong and large enough to support the TV securely.
y Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer. 37LV3500 42LK430 37/42/47LK450 42/47LK520 200 x 200 M6 LSW200B, LSW200BG 42/47/55LV3500 55LK520 400 x 400 M6 4 LSW400B, LSW400BG, DSW400BG VESA Standard screw Number of screws 4 Wall mount bracket
(optional) CAUTION
y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
y Do not over tighten the screws as this may cause damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE
y Use the screws that are listed on the VESA standard screw specifications.
y The wall mount kit includes an installation manual and necessary parts.
y The wall mount bracket is optional. You can obtain additional accessories from your local dealer.
y The length of screws may differ depending on the wall mount. Make sure to use the proper length.
y For more information, refer to the manual supplied with the wall mount. ASSEMBLING AND PREPARING 31 32 REMOTE CONTROL Tidying cables PW340, PW350, PW350U, PW350R, PZ200 series 22LK330, LV2500, LV2520, LV3500 series 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. 1 Gather and bind the cables with the cable holder. REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. and CAUTION
y Do not mix old and new batteries, as this may damage the remote control. Power cord holder 2 Gather and bind the cables with the cable holder. Cable holder CAUTION
y Do not move the TV by holding the cable holder and power cord holder, as the cable holders may break, and injuries and damage to the TV may occur. Cable holder Make sure to point the remote control toward at the remote control sensor on the TV. 26/32LK330, LK430, LK450, LK520 series 1 Gather and bind the cables with the cable management clip. 2 Fix the cable management clip firmly to the TV. E N E G N L G I S H E N E G N L G I S H Cable management clip
(POWER) Turns the TV on or off. ENERGY SAVING (See p.63) Adjusts the Energy Saving settings. AV MODE (See p.43) Selects an AV mode. INPUT (See p.43) Rotates through inputs. Also switches the TV on from standby. TV Returns to the last TV channel. Number button Enters numbers. LIST (See p.39) Accesses the saved channel list.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2. FLASHBK Alternates between the two last channels selected (pressing repeatedly). ENERGY AV MODE INPUT TV 3 6 9 FLASHBK 2 5 8 0 SAVING 1 4 7 LIST ENERGY AV MODE INPUT TV 3 6 9 FLASHBK 2 5 8 0 SAVING 1 4 7 LIST REMOTE CONTROL 33 34 REMOTE CONTROL VOL MARK FAV 3D MUTE CH P A G E INFO Home Q.MENU ENTER BACK EXIT MARK FAV VOL RATIO CH P A G E MUTE INFO Home Q.MENU ENTER BACK EXIT VOL Adjusts the volume level. MARK Selects a menu or option. FAV (See p.39) Accesses your favorite channel list. 3D (For 3D TV) (See p.46) Used for viewing 3D video. MUTE Mutes all sounds. CH Scrolls through the saved channels. PAGE Moves to the previous or next screen. VOL Adjusts the volume level. MARK Selects a menu or option. FAV (See p.39) Accesses your favorite channel list. RATIO (See p.42) Resizes an image. MUTE Mutes all sounds. CH Scrolls through the saved channels. PAGE Moves to the previous or next screen. INFO Home Q.MENU ENTER BACK EXIT INFO (See p.40) Views the information of the current program and screen. Home Accesses the main menus, or saves your input and exit the menus. Q. MENU (See p.44) Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. BACK Allows the user to move back one step in an interactive application or other user interaction function. SIMPLINK (See p.80) Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu. EXIT Clears all on-screen displays and returns to TV viewing. E N E G N L G I S H E N E G N L G I S H 3D SETTING Colored buttons These access special functions in some menus. 3D SETTING (For 3D TV) ( Plasma ) (See p.48) Used for viewing 3D video. REMOTE CONTROL 35 36 WATCHING TV FREEZE RATIO Control buttons Controls the SIMPLINK compatible devices (USB,SIMPLINK). FREEZE ( Plasma ) Freezes the current frame (Not supported when using USB Mode and Simplink.). RATIO (See p.42) Resizes an image. Connecting a cable box Connect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 ). WATCHING TV Connecting to an antenna or cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Connecting an antenna or basic cable Connect the TV to a wall antenna socket with an RF cable (75 ). E N E G N L G I S H E N E G N L G I S H NOTE
y Use a signal splitter to use more than 2 TVs.
y Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna. CAUTION
y Make sure not to bend the copper wire of the RF cable. Copper wire
y Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. WATCHING TV 37 38 WATCHING TV 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Watching TV 1 In Standby mode, press the power button on the remote control to turn the TV on. 2 Press INPUT and select TV. 3 Control the TV using the following buttons while you are watching TV. Button CH (^, v) LIST1 0 - 9 VOL (+, -) MUTE AV MODE2 Q.MENU FLASHBK RATIO FREEZE Description Scrolls through saved channels. Selects a channel on the saved channel list. Selects a channel by entering numbers. Adjusts the volume level. Mutes all sounds. Selects an AV mode (See p.43). Accesses the quick menus
(See p.44). Alternates between the last two channels selected. Resizes an image (See p.42). Freezes the current frame while you are watching TV ( Plasma ). 1 The Lock icon () appears in front of a channel blocked with parental control. 2 Each AV mode has the optimized image and sound settings. If you select Off, the image and sound settings will be restored to the previously customized settings. 4 To turn the TV off, press the power button on the remote control. The TV switches to Standby mode. E N E G N L G I S H E N E G N L G I S H Selects a language to display. Selects Home Use for the home environment. Sets the standby light.
(For LED LCD TV) Selects the time zone and daylight saving. Scans and saves available channels automatically. Language Mode Setting Power Indicator Time Zone Auto Tuning NOTE
y To display images in the best quality for your home environment, select Home Use.
y Store Demo is suitable for the retail environment.
y If you select Store Demo, any customized settings will switch back to the default settings of Store Demo in 5 minutes.
y Power Indicator feature is disabled in Store Demo mode. 4 When the basic settings are complete, press ENTER. NOTE
y If you do not complete the Initial setting, it will appear whenever the TV turns on.
y Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press the power button on the remote control. Connecting to the AC/DC adapter
(For 19/22/26LV2500, 19/22/26LV2520) AC/DC Adaptor 1 Connect the AC/DC adapter plug to the power input jack on the TV. 2 Connect the power cord to the AC/DC adapter first, then plug the power cord into the wall power outlet. CAUTION
y Please be sure to connect the TV to the AC/
DC power adapter before connecting the TVs power plug to a wall power outlet. Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. The Power indicator turns red and the TV switches to Standby mode. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE
y You can also access Initial Setting by accessing OPTION in the main menu. Managing channels Setting up channels Storing channels To store channels automatically, 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to Auto Tuning and press ENTER. 4 Select Start to start automatic tuning. The TV scans and saves available channels automatically. NOTE
y If the TV scans and saves channels, the previously saved channels will be overwritten. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. To store channels manually, 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to Manual Tuning and press ENTER. 4 Scroll through the channel types, and then add or delete channels. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. NOTE
y If the TV scans a blocked channel, you will be prompted to enter your password to keep the channel scanned.
y You can store up to 1000 channels. The number of channels that you can store differs depending on the broadcasting signal environment.
y The channels are stored in the order of DTV, TV, Cable DTV and Cable TV. Editing your channel list Using favorite channels Checking current program info WATCHING TV 39 40 WATCHING TV Add the channels that you watch frequently to the favorite list. Press ENTER to view the information of the currently program while you are watching. The following information appears at the top of the screen. Setting up your favorite list 1 Select a channel to add to the favorite list. 2 Press FAV. 3 Press the Navigation buttons to select your desired favorite channel group. 4 Press the Yellow button to register or cancel the current channel in favorite channel list. Press the Blue button to move to Channel Edit. 5 Press the Navigation buttons to scroll to Favorite. 6 Press ENTER to add the selected channel to the favorite list. 7 When you are finished, press EXIT. Banner information Program title End time Current time
Start time Progress bar Icon Description Multilingual
The program contains two or more audio language services. You can change the audio language using the quick menu. Dolby Digital The program contains a Dolby Digital audio signal in TV and HDMI input sources. NOTE
y You can also setup Favorite List in the CHANNEL menu - Channel Edit. E N E G N L G I S H E N E G N L G I S H Selecting a channel on the favorite list 1 Press FAV to access the favorite list.
- To move to the previous or next page, press CH (^, v). 2 Select a channel you want and press ENTER. Caption Aspect ratio Resolution Rating
The program contains one or more language caption services. You can change the caption language using the quick menu.
The original aspect ratio of the video is 4:3. The original aspect ratio of the video is 16:9 (wide). The video resolution is 720 x 480i. The video resolution is 720 x 480p. The video resolution is 1280 x 720p. The video resolution is 1920 x 1080i. The video resolution is 1920 x 1080p. The program contains Rating information. See "LOCK Settings" on p.69. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to Channel Edit and press ENTER. 4 Edit channels using the following buttons. Button
^, v, < , >
ENTER CH (^, v) Blue button FAV Q.MENU Yellow button Description Highlights the channel type. Scrolls through channel types or channels. Selects the highlighted channel to view. Moves to the previous or next page. Adds or deletes a channel. The deleted channel displays in blue. Registers or cancels the current channel in favorite channel list. Selects your desired favorite channel group. Blocks or unblocks a channel. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. Selecting a channel on the channel list 1 Press LIST to access the channel list.
- To move to the previous or next page, press CH (^, v).
- To tune to the CHANNEL menu - Channel Edit, press Blue button. 2 Select a channel you want and press ENTER. NOTE
y The Lock icon () appears in front of a channel blocked with parental control.
y If you select the blocked channel, you will be prompted to enter your password. WATCHING TV 41 42 WATCHING TV
Button Description INFO
< or >
^ or v Shows current channel information. Shows previous or next channel information. Changes a channel. E N E G N L G I S H E N E G N L G I S H Using additional options Adjusting aspect ratio Resize an image t at its optimal size by pressing RATIO while you are watching TV. NOTE
y You can also change the image size by pressing Q. MENU or accessing Aspect Ratio in the PICTURE menu.
y The available ratio varies depending on the input source.
- The input sources: HDMI-PC and RGB-PC support 4:3 and 16:9.
- The input sources: HDMI-PC 1920 X 1080 supports all of the aspect ratios.
- 16:9: Resizes images to fit the screen width.
- Set By Program: Displays images in the same aspect ratio as the original image.
(4:3 4:3 ) Set By Program
(16:9 16:9 ) Set By Program
- Zoom: Formats an image to fit the screen width. The top and bottom of the image may not appear.
- Just Scan: Displays video images in the original size without cutting off the edges. NOTE Just Scan If you access, Aspect Ratio in the Quick menus,
y Press < or > to stretch an image vertically.
y Press ^ or v to move the zoom focus up or down. NOTE
y If you select Just Scan, you may see image noises at the edge or edges of the screen.
y The input sources: DTV, Component, HDMI-DTV, and DVI-DTV
(720p/1080i/1080p) support Just Scan.
- Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1.
y To change the ratio of the cinema zoom, press < or > and its range is from 1 to 16.
y To move the zoom focus up or down, press ^ or v.
- 4:3: Resizes images to the previous standard 4:3. NOTE
y If you enlarge or reduce an image, the image may be distorted. WATCHING TV 43 44 WATCHING TV Locking the buttons on the TV
(Child Lock) Lock the buttons on the TV to prevent any unwanted operations or accidents by children. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to LOCK and press ENTER. Input password. 3 4 Press the Navigation buttons to scroll to Key Lock and press ENTER. 5 Select On to activate the Key lock feature.
- To deactivate the Key lock feature, select Off. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. NOTE
y The TV is programmed to remember the last setting after you turn the TV off.
y If you turn the TV off with the Key lock
, INPUT, CH (^, v) or feature activated, Number buttons on the remote control.
y If you press any button on the TV with the Key lock feature activated, appears on the screen. Key Lock E N E G N L G I S H E N E G N L G I S H RGB-PC HDMI Use the TV as a computer monitor. Watches video from a HTS or other high definition devices. The disconnected input sources will be gray.
y To add an input label, press the Blue button. You can easily identify a device connected to each input source.
y If you connect a new external device to the TV, a pop-up window appears. Select Yes on the pop-up window to switch to that input source.
y To access the SIMPLINK, press the Red button. If you select SIMPLINK and On, the pop-up window for the HDMI input will not display. ( LCD ) Adding an Input label Add a label to an input source so that you can easily identify a device connected to each input source.
1 Press INPUT to access the input sources. 2 Press the Navigation buttons to scroll to one of the input sources. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to one of the input labels and press ENTER. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. Changing AV modes Each AV mode has optimized image and sound settings. Press AV MODE repeatedly to select an appropriate mode. Mode Description Off Sport Game Cinema Changes to the previously customized settings. Uses the optimized image and sound settings for a cinematic look. Uses the optimized image and sound settings for dynamic action sports. Uses the optimized image and sound settings for fast gaming. When playing a video game using PlayStation or Xbox. it is recommended to use the Game mode. When in Game mode, functions related to picture quality will be optimized for playing games. Using the input list Selecting an input source 1 Press INPUT to access the input sources.
- The connected device displays on each input source. NOTE
y You can also access the input source list by selecting INPUT in the Home menu. 2 Press the Navigation buttons to scroll to one of the input sources and press ENTER.
( LCD ) Input source Description TV USB AV Component Watch TV over the air, cable, and digital cable broadcast. Play media files from a thumb drive. Watch video from a VCR or other external devices. Watch video from a DVD or other external devices, or through a digital set-top box. Using the quick menu Customize frequently used menus. 1 Press Q. MENU to access the quick menus. 2 Press the Navigation buttons to scroll through the following menus.
A
8 7 6 5 1 2 3 4 Menu Description 1 Aspect Ratio Changes the image size (16:9, Just Scan, Set By Program, 4:3, Zoom, Cinema Zoom). 2 Picture Mode Changes the image mode
(Intelligent sensor1, Vivid, Standard, APS1, Cinema, Sport, Game, Expert1, Expert2). 3 Sound Mode Changes the sound mode 4 Multi Audio SAP 5 Sleep Timer 6 Del/Add 7 Caption 8 USB Device
(Standard, Music, Cinema, Sport, Game). Changes the audio language
(Digital signal). Changes the MTS sound (Analog signal). Sets the length of time until the TV to turns off. Edits the channels to add or delete the channel. Activates or deactivate the subtitles. Ejects a USB device when a USB device is connected. 1 Depending on model NOTE
y The available menus and options may differ from the input source that you are using. 3 Press the Navigation buttons to scroll to the option you want. 4 When you are finished, press Q. MENU. Using the customer support Testing the Picture / Sound To execute picture and sound tests. 1 Press Home to access the main menus. 2 Press the Red button to access Customer Support. 3 Press the Navigation buttons to scroll Picture Test or Sound Test and press ENTER. 4 If you have any problem, press the Navigation buttons to scroll to Yes and press ENTER. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. Using the product or service information To check the product or service information 1 Press Home to access the main menus. 2 Press the Red button to access Customer Support and press ENTER. 3 Press the Navigation buttons to scroll Product/
Service Info.. You can check the various product/Service infomation based on your model. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. WATCHING TV 45 46 3D IMAGING please consult with your doctor before watching 3D TV. Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.
y Risk of photosensitization seizure can be reduced with the following actions. Take frequent breaks from watching 3D TV. For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures. Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV. Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time. Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV. Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving. E N E G N L G I S H E N E G N L G I S H 3D IMAGING (FOR 3D TV) 3D Technology This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format. WARNING
y When viewing 3D imaging, watch the TV from an effective viewing angle and within the appropriate distance. The appropriate angle and distance are provided in this manual. If you exceed this viewing angle or distance, you may not be able to view the 3D imaging. Furthermore, the 3D imaging may not display if it is viewed while you are lying down (For LED LCD TV).
y If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.
y Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.
y Pregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.
y Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.
y Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development.
y Warning for photosensitization seizure:
Some viewers may experience a seizure or epilepsy when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, 3D IMAGING 47 48 3D IMAGING Viewing 3D Imaging View 2D mode for 3D images NOTE
y To watch the TV in 3D, you must put on your 3D glasses. For best results, you should wear LG Brand 3D glasses. The 3D imaging may not display properly when using another brand of 3D glasses. Please see the 3D glasses manual for instructions on how to use the 3D glasses.
y After powering on the TV, a few seconds may be needed for your TV to calibrate.
y It may take a moment for you to see the 3D imaging if you look away from the TV and then revert your eyes back to the 3D program.
y The TV may flicker slightly if the 3D imaging is displayed under 3 wavelength fluorescent light (50 Hz - 60 Hz) or magnetic fluorescent lamp (50Hz - 60 Hz). In such instances, it is recommended to turn the lights off.
y If there is an obstacle between the TV and the 3D glasses, the 3D imaging may not display properly.
y Do not use the TV in close proximity to other electronic and RF equipments.
y In Analog TV, 3D Imaging does not work.
y When watching 2D images, it is recommended to take off the 3D glasses. If you watch 2D images with the 3D glasses on, you may see distorted images. When using 3D Glasses CAUTION
y 3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions.
y Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.
y Do not store the 3D glasses in hot or cold locations.
y Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.
y Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth. Shake off any dust before using the cloth since the glasses are easily scratched. 3D Imaging Viewing Range TV size, viewing angle & other circumstances may change the viewing distance and the angle of view. Viewing Distance 2 m - 10 m
(6.5 ft - 32.8 ft) Viewing Angle 120 (When the viewing distance is 2 m (6.5 ft)) E N E G N L G I S H E N E G N L G I S H View 3D mode for 3D images 1 Play the 3D video or select 3D channel.
(2D to 3D mode is available with all contents.) 2 Press 3D and select same type in your displayed picture on the screen.
(Select type on "3D Video" tab.) 3D Video 2D Video NOTE
y Turn on the 3D mode automatically for HDMI input playing the 3D blueray titles. 3 Press ENTER on displayed information window. Power on your 3D glasses and put them on. Sit 2 meters from TV to enjoy the best 3D view.
Turn off 3D Mode.
4 To turn off the 3D mode, press 3D and select ENTER.
1 Play the 3D video or select 3D channel. 2 Press 3D and select same type in your displayed picture on the screen.
(Select type on "2D Video" tab.) 3D Video 2D Video 3 To turn off the 2D mode, press 3D and select ENTER. Turn off 2D Mode.
Using 3D quick menu option 1 Press 3D SETTING. 2 Use the following options while viewing 3D imaging.
Button 3D Picture Size 3D Depth 3D Viewpoint 3D Picture Balance 3D Picture Correction Description Cuts off the outer edges of the picture and stretch it to fit the full screen in 3D mode. Adjusts the distance between the object and the background in the picture to enhance the 3D effect in 2D to 3D mode. Brings the picture (including both the object and background images) to the front or back to enhance the 3D effect in 3D mode. Adjusts the color and brightness difference between the right and left sides of the picture in 3D mode. Changes the order of images in the right and left sides of the picture in 3D mode. CAUTION
y Some menus may not work while watching the TV in 3D.
y The 3D imaging mode is disabled automatically when switching DTV channels.
y The screen may not be displayed properly if you view 2D DTV images in 3D imaging mode.
y 3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to the TV.
y For *mpo files (3D camera files), the 3D imaging mode is enabled automatically.
y 3D may not be displayed properly for some PC graphics cards. NOTE
y Energy Saving is disabled while playing in 3D. 3D IMAGING 49 50 ENTERTAINMENT ENTERTAINMENT Connecting USB storage devices Connect USB storage devices such as a USB flash drive or external hard drive to the TV and use multimedia features (See "Browsing files" on p. 51). Connect a USB flash drive or USB memory card reader to the TV as shown in the following illustration. N N I I B B S S U U or E N E G N L G I S H E N E G N L G I S H 3 N I To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files. 1 Press Q.MENU to access the quick menus. 2 Press the Navigation buttons to scroll to USB Device and press ENTER. 3 Disconnect the USB storage device only when the message says that it is safe to remove. CAUTION
y Do not turn the TV off or remove a USB storage device while the USB storage device is connected to the TV, as this could result in loss of files or damage to the USB storage device.
y Back up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty. Tips for using USB storage devices
y The TV recognizes only a USB storage device.
y If you connect a USB storage device to the TV through a USB hub, your TV may not recognize the USB storage device.
y The TV may not recognize a USB storage device that requires a special driver.
y The recognition speed of a USB storage device may differ depending on the device.
y Only use a USB storage device which has normal music or image files.
y Use only USB storage devices that are formatted as a FAT 32 or NTFS file system.
y If you format a USB storage device as a NTFS file system, you cannot delete the saved files.
y You may need to connect a USB storage device to an external power supply with a power adapter.
y If the TV does not recognize a connected USB storage device, replace the cable and try again. Do not use an excessively long cable.
y The TV does not support some USB storage devices properly.
y You can use a multi-partition (up to 4) USB storage device.
y You can use up to 4 USB storage devices at a time by using a USB multi-card reader.
y The file alignment method of a USB storage device is similar to the one of Window XP.
y You cannot create or delete a folder saved in a USB storage device directly on the TV.
y The number of characters for a file name is up to 100 English characters.
y If there are too many folders and files in one folder, it may not operate properly.
y The recommended capacity for a USB external hard disk is 1 TB or less and for a USB storage device is 32 GB or less.
y If a USB external hard disk with the Energy Saving feature does not work, turn the USB external hard disk off and on again to make it work properly. For more information, refer to the user manual of the USB external hard disk.
y USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
y The electrostatic can cause USB devices malfunction. In this case, USB Device has to be plugged again. Browsing files Access the photo, music, or movie lists and browse files. 1 Connect a USB storage device. 2 Press Home to access the main menus. 3 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 4 Press Navigation buttons to scroll to MOVIE LIST, PHOTO LIST, or MUSIC LIST and press ENTER.
5 Select Drive1 to access the connected USB storage device. 6 Press the Navigation buttons toSelect a folder/
file you want. 1 2
1 2
3 4 5 3 4 5 ENTERTAINMENT 51 52 ENTERTAINMENT 1 2
3 4 5 Description No. 1 Moves to the upper level folder. 2 Current page number/total number of pages 3 Current page number/total number of pages 4 Contents under the folder focused on 1 5 Available buttons on the remote control Button Green button Yellow button Blue button Description Moves to Photo List, Music List, or Movie List. Change Numbers: Changes the number or thumbnails displayed at a time. Allows you to mark certain files. Tips for using USB storage devices E N E G N L G I S H E N E G N L G I S H 3D mpo Type Video y MPG, MPEG, DAT, TS, TRP, TP, VOD, MP4, Supported File Formats MOV, MKV, DivX, AVI, Motion JPEG (AVI, MP4, MKV), ASF, WMV, FLV
y Resolution:
y Frame Rate:
under 1920 pixel (width) x 1080 pixel (height) under 30 frame/sec (1920 x 1080), under 60 frame/sec (1280 x 720)
y Max bitrate of playable movie file: 20 Mbps
(Mega bit per second)
y Bit rate of audio format: within 32 kbps to 320 kbps (MP3)
y Supported subtitle format: *.smi, *.srt, *.sub
(MicroDVD, SubViewer 1.0/2.0), *.ass, *ssa,
*txt (TMPlayer), *.psb (PowerDivX) Type Photo y JPG
y Available size Supported File Formats Baseline: 64 pixel (W) x 64 pixel (H) - 15360 pixel (W) x 8640 pixel (H) Progressive: 64 pixel (W) x 64 pixel (H) -
1920 pixel (W) x 1440 pixel (H)
* Do not use the progressive option when saving JPG files on your PC.
y It may take some time to open high-
resolution images in full screen. For 3D TV File Extensions Item Profile 2D jpeg jpg jpe Supproted file format Progressive Photo size y Min: 64 x 64
y SOF0:
baseline
y SOF1: Extend Sequential
y SOF2:
y Max - Normal Type: 15360
(W) x 8640 (H)
y Progressive Type: 1920
(W) x 1440 (H)
y mpo Supproted file format Photo size y 4:3 size: 3,648 x 2,736 2,592 x 1,944 2,048 x 1,536
y 3:2 size: 3,648 x 2,432 Music y MP3
y Bit rate range 32 Kbps - 320 Kbps
y Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz
* A copy-protected file will not play. Viewing Videos Your TV can display video files from a USB storage device. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Movie List and press ENTER. 4 Select Drive1 to access the connected USB storage device. 5 Press the Navigation buttons to scroll to a folder/file you want and press ENTER. 6 Play a movie by using the following menus/
buttons.
Button Navigation button Description Scrolls through the files. MARK ENTER CH (^, v) Plays the highlighted file or enters the mark mode. Moves to the previous or next page. Enters the mark mode. Description Play Marked Plays the selected video. Mark All Unmark All Exit Mark Mode Selects all files. Clears all of your selections. Exit the Mark Mode. Menu ENTERTAINMENT 53 54 ENTERTAINMENT NOTE
: Abnormal files are displayed using this
y graphic.
y
: Non-supported files are displayed using this graphic. 7 Control playback by using the following buttons.
Button Description
Stops the playback. Plays a video. Pauses or resumes the playback. Scans backward in a file. Scans forward in a file.
and Plays videos in slow motion. Skips to specific points in a file during playback. The time of a specific point will appear on the status bar. In some files, this function may not work properly. Increases or deceases the brightness of your screen. Shows the Option menu (See p.54). Selects the desired source. Hides the menu on screen. To see the menu again, press ENTER button to display. Returns to TV viewing.
< or >
ENERGY SAVING Q.MENU AV MODE BACK EXIT Tips for playing video files
y Some user-created subtitles may not work properly.
y Subtitles may not display some special characters or HTML tags.
y Subtitles in the non-supported languages are unavailable.
y The time information in an external subtitle file should be arranged in ascending order to play. E N E G N L G I S H E N E G N L G I S H
y The screen may suffer from temporary interruptions such as image stoppage or faster playback when you change the audio language.
y If you play a damaged video file, the video file may not be played correctly or some player functions may not be unavailable.
y The TV may not properly play the video files produced with certain encoders.
y If the recorded file does not have video or audio, either video or audio is not outputted
y If the TV plays the recorded file without video or audio, either video or audio is not outputted.
y The TV may not smoothly play the video files with a resolution higher than the supported resolution for each frame.
y The TV may not properly play the video files not included on the specified type and format.
y The TV may not play the files encoded with GMC (Global Motion Compensation) or quarter-pel motion estimation.
y The TV supports the only files saved in ASCII code in subtitles.
y The maximum number of characters displayed on each subtitle line is 250
(Korean), 500 (English), and 500 (Numbers).
y The TV supports the only 10,000 sync blocks within the subtitle file.
y The TV supports the H.264 codec up to the profile level 4.1.
y The TV does not support DTS audio codec.
y The TV cannot play a video file whose size is larger than 30 GB.
y If you play a video file through the USB connection that does not support the high speed, the video player may not work properly.
y The TV supports a USB storage device whose version is lower than 2.0. However, the USB storage device may not work properly in the movie list.
y The video file and its subtitle should be in the same folder and the name of the video file and subtitle should be identical.
y You can adjust the image by using ENERGY SAVING and AV MODE. But you cannot customize image options of each mode.
y The TV may not play the video files in the supported file format depending on the encoded condition.
y The TV will not play the video files that has a damaged index or no index. Q.MENU options for movie list 1 Press Q. MENU. A pop-up window will appear. 2 Press the Navigation buttons to scroll to movie list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. Set Video Play. Option Description Picture Size Audio Language Subtitle Language Language Code Page Sync Position Size Repeat Selects your desired picture format for videos.
y Full Mode: Files are played in full screen mode according to the aspect ratio of video.
y Original Mode: Files are played in their native size. Changes the Language Group of the audio for video files. Files with a single audio track cannot be selected. The subtitles can be turned on or off. Activated for SMI subtitles and can select the language within the subtitle. Subtitle font selection. When set to default, contents are displayed in the language set in "Option -
Language - Menu Language."
Supported Subtitle Language Group Language Latin1 English, Spanish, French English, Korean Korean If the video is not synchronized with the captions, it can be adjusted by 0.5 second. Move the location of the subtitles. Changes the subtitle font size. Turn on/off repeat function of movie playback. When turned on, the file within the folder will be played back repeatedly. When turned off, if the next file name is similar to the previous file, it can be played sequentially. NOTE
y When replaying a video file after stopping, select Yes to restart where it previously stopped.
y If continuous series files exist within the folder, the next file will automatically be played. But, this excludes cases when the Repeat function of Movie List Option is turned On (See p.54) or when set as Play Marked. Set Video. Allows you to change Video presets. (Refer to
"PICTURE Settings" on p.63). Set Audio. Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67). ENTERTAINMENT 55 56 ENTERTAINMENT DivX registration code Deactivating the DivX feature You can deactivate all of the devices through the web server and block devices from activating. Delete the existing authentication information to receive a new DivX user authentication for the TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to DivX Deregistration and press ENTER. 5 Select Yes to confirm.
6 When you are finished, press EXIT. When you return to the previous menu, press BACK. Registering the DivX code The DivX registration code allows you to rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the files registration code should be same as your TVs DivX registration code. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to DivX VOD Registration and press ENTER. 5 View the registration code of your TV.
6 When you are finished, press ENTER. NOTE
y While you are checking the registration code, some buttons may not work.
y If you use the DivX registration code of another device, you cannot play the rented or purchased DivX file. Make sure to use the DivX registration code assigned to your TV.
y The video or audio files that are not converted by the standard DivX codec may be corrupted or not be played.
y The DivX VOD code allows you to activate up to 6 devices under one account. E N E G N L G I S H E N E G N L G I S H ENTERTAINMENT 57 58 ENTERTAINMENT Viewing Photos You can view image files saved on a USB storage device. The displays on the screen may differ based on the model. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Photo List and press ENTER. 4 Select Drive1 to access the connected USB storage device. 5 Press the Navigation buttons to scroll to a folder/file you want and press ENTER. 6 View photos by using the following menus/
NOTE
: Abnormal files are displayed using this
y graphic.
y
: Non-supported files are displayed using this graphic. 7 The following options are available while viewing photos.
Option Description buttons.
Slideshow
BGM
(Background Music)
(Rotate)
y Starts or stops a slideshow with selected photos.
y If there are no selected photos, all photos saved in the current folder display during a slideshow.
y To set a slideshow speed, select Option.
y Turns the background music on or off. To set the background music folder, select Option. NOTE
y You can't change or set-up the BGM while viewing the
*.mpo files (3D camera file). Rotates photos clockwise (90, 180, 270, 360). NOTE
y The supported photo size is limited. You cannot rotate a photo if the resolution of the rotated width is larger than the supported resolution size. Button Navigation button ENTER CH (^, v) MARK Menu Description Scrolls the file. Views the highlighted file or enters the mark mode. Moves to the previous or next page. Enters the mark mode. Description View Marked Views the selected photo. Mark All Unmark All Exit Mark Mode Selects all files Clears all of your selections. Exits the Mark Mode.
(Zoom In)
(ENERGY SAVING) Option Hide Exit Views the photo by zoom in 2, 4 times by using Blue button. Increases or decreases the brightness of your screen. Shows the Option menu (See p.58). Hides the option window. To display the options, press ENTER. Moves to the previous menu screen. NOTE
y Option values changed in Photo List do not affect Movie List and Music List.
y Option values changed in Photo List or Music List are changed likewise in Photo List and Music List, but not Movie List. Q.MENU options for photo list 1 Press Q. MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to photo list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. Set Photo View. Option Slide Speed BGM Description Selects a slideshow speed (Fast, Medium, Slow). Selects a music folder for the background music.
y Repeat
y Random NOTE
y You cannot change the music folder while the background music is playing. Set Video. Allows you to change Video presets. (Refer to
"PICTURE Settings" on p.63). Set Audio. Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67). E N E G N L G I S H E N E G N L G I S H ENTERTAINMENT 59 60 ENTERTAINMENT NOTE
: Abnormal files are displayed using this
y graphic.
y
: Non-supported files are displayed using this graphic. 7 Control playback by using the following buttons. Button
Description Stops playback. Plays a music file. Pauses or resumes playback. Skips to the previous file. Skips to the next file. Play with Photo
(ENERGY SAVING) Option Hide Exit Displays photos during playback. Increases or deceases the brightness of your screen. Shows the Option menu (See p.60). Hides the option window. To display the options, press ENTER. Moves to the previous menu screen. E N E G N L G I S H E N E G N L G I S H Q.MENU options for music list 1 Press Q. MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to music list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. NOTE
y Option values changed in Movie List does not affect the Photo List and Music List.
y Option value changed in Photo List and Music List are changed likewise in Photo List and Music List. Set Audio Play. Select Repeat or Random option. Set Audio. Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67). NOTE
y The TV will not play copy protected files.
y If the TV is not in use for some time during playback, the information box as a screensaver will appear to prevent image burn. To return to the Music list screen, press ENTER or BACK. File name
Time elapsed /Duration Listening to music 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Music List and press ENTER. 4 Select Drive1 to access the connected USB storage device. 5 Press the Navigation buttons to scroll to a folder/file you want and press ENTER. 6 Play music by using the following menus/
buttons.
Button Navigation button ENTER CH (^, v) MARK Menu Description Scrolls through the files. Plays the highlighted file or enters the mark mode. Moves to the previous or next page. Enters the mark mode. Description Play Marked Plays the selected music file. Mark All Selects all files. Unmark All Exit Mark Mode Clears all of your selections. Exits the Mark Mode. CUSTOMIZING SETTINGS 61 62 CUSTOMIZING SETTINGS CUSTOMIZING TV SETTINGS The Main Menus 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. 4 When you are finished, press EXIT. CHANNEL (See p.62) Sets up and edit channels. LOCK (See p.69) Locks or unlocks channels and programs. PICTURE (See p.63) Adjusts the image size, quality, or effect. AUDIO (See p.67) Adjusts the sound quality, effect, or volume level.
TIME (See p.68) Sets the time, date, or Timer feature. MY MEDIA (See p.50)
OPTION (See p.71) Customizes the general settings. INPUT (See p.43) Views the input sources with their labels. E N E G N L G I S H E N E G N L G I S H Customizing Settings CHANNEL Settings 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you
want and press ENTER.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available channel settings are described in the following. Setting Auto Tuning Manual Tuning Channel Edit Description Tunes and stores all available channels through antennas or cable inputs (See p.38). Tunes and stores the channels you want manually (See p.38). Adds or deletes channels on the channel (See p.39). CUSTOMIZING SETTINGS 63 64 CUSTOMIZING SETTINGS PICTURE Settings 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT.
The available picture settings are described in the following. Setting Description Aspect Ratio Changes the image size to view images at its optimal size (See p.42). Picture Wizard Adjusts the image quality and calibrates the screen. The customized options will be saved as Expert1 in the Picture Mode. NOTE
y If you use Picture Wizard, the Energy saving feature will turn off automatically.
y To reset changes made by Picture Wizard, operate Picture Reset when Picture Mode is on Expert1. Energy Saving Reduces the power consumption by adjusting the screen brightness. NOTE
y When selecting Auto or Maximum, Backlight will not work. Option Auto ( LCD ) The backlight is adjusted automatically corresponding to the surroundings when selecting Auto using the Intelligent sensor feature. Intelligent sensor
( Plasma ) The most suitable picture is automatically adjusted according to the surrounding conditions. Off Select if this feature is not necessary. Minimum/
Medium/Maximum Screen off Selects the brightness level. The screen turns off in 3 seconds. Pressing any button of the remote control will turn on the screen again. Setting Picture Mode Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the TV. Description Mode Intelligent Sensor
( LCD ) Vivid Standard APS ( Plasma ) Cinema Sport Game Expert NOTE Sets the TV to adjust the image settings, such as contrast, brightness, sharpness, color, or tint, automatically corresponding to the surrounding environments. Adjusts the video image for the retail environment by enhancing the contrast, brightness, color, and sharpness. Adjusts the image for the normal environment. Maximizes video images reducing power consumption without hurting picture quality. Optimizes the video image for a cinematic look to enjoy movies as if you are in a movie theater. Optimizes video images for high and dynamic actions by emphasizing primary colors such as white, grass, or sky blue. Optimizes the video image for a fast gaming screen such as PCs or games. Adjusts the detailed video image settings for video experts as well as general viewers. E N E G N L G I S H E N E G N L G I S H
y If you select Intelligent Senesor, the option of the Energy saving feature will switch to Auto automatically ( LCD ). TruMotion
(Depending on model) Advance video technology that provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture. TruMotion works with all inputs except PC mode. If you enable TruMotion, noise may appear on the screen. If this occurs, set TruMotion to Off. If you select "Picture Mode-Game", set "TruMotion" to "Off". Option High Low Off User Provides smoother picture movement. Provides smooth picture movement. Use this setting for standard use. Turn off TruMotion operation. De-Judder Adjusts noise of the screen. De-Blur Adjusts after-image of the screen. SCREEN (RGB-
PC) Customizes the PC display options. Option Resolution Selects a proper resolution when your PC uses 1024 X 768, 1280 X 768, or 1360 X 768 resolution. Auto Configure Sets the TV to optimize the options automatically for the TV display. Position Size Phase Reset Locates the image at the proper position. Adjusts the image size. Eliminates horizontal streaking. Restores the options to the default setting. CUSTOMIZING SETTINGS 65 66 CUSTOMIZING SETTINGS Basic Image Options Setting Backlight ( LCD ) Description Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. NOTE
y If you use the Energy saving - Off, Minimum, Medium, Backlight will be available. Contrast Brightness Sharpness Color Tint Color Temp. Increases or decreases the amplitude of the video signal. You may use Contrast when the bright part of the picture is saturated. Adjusts the base level of the signal in the picture. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts intensity of all colors. Adjusts the balance between red and green levels. Sets to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors such as blue. Advanced Control Customizes the advanced options. Picture Reset Restores the options of each mode to the factory default. Advanced Image Options (Depending on model) Setting Dynamic Contrast Dynamic Color Description Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue and green white look more vivid. Skin Color It detects the skin area of video and adjusts it to express a natural skin color. Noise Reduction Reduces screen noise without compromising video quality. Digital Noise Reduction Removes noise caused by compressing video. Gamma Black Level Clear White Eye Care Real Cinema or Film Mode You can adjust brightness of dark area and middle gray level area of the picture.
Low: Make the dark and middle gray level areas brighter.
Medium: Express the original picture level.
High: Make the dark and middle gray level area darker. Sets black level of the screen to proper level.
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter. Makes the white area of screen brighter and more white. Adjusts the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures. This feature is enabled in Picture Mode-Standard, Sport, Game. Makes video clips recorded in film look more natural by eliminating judder effect. DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect. This function can also work when TruMotion is off. Setting Color Gamut Edge Enhancer xvYCC Color Filter Expert Pattern Description Advanced Control Maximizess the utilization of color to increase color quality.
Standard: Displays standard set of colors.
Wide: Increase number of colors used. Expert Control Displays color domain of the signal.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
EBU: Mode to display EBU standard color area. ( LCD )
SMPTE: Mode to display SMPTE standard color area. ( LCD )
BT709: Mode to display BT709 standard color area. ( LCD ) Shows clearer and distinctive yet natural edges of the video. This function works well over Sharpness UI 60 value. This is produces richer colors. This feature represents rich colors as much as a conventional video signal. This function is enabled in Picture mode - Cinema, Expert when xvYCC signal is inputted through HDMI. This is the function to filter the specific colors of the video. You can use the RGB filter to set color saturation and hue accurately. This is the pattern used for expert adjustment. This function is enabled in Picture Mode - Expert when you watch DTV. Color Temperature Adjusts the overall color of the screen by changing the white baseline. E N E G N L G I S H E N E G N L G I S H Plasma LCD a. Gamma : Select Low, Medium, High b. Method : 2 Points
y Pattern: Inner, Outer
y Red/Green/
Blue Contrast, Red/Green/Blue Brightness d. Apply to all inputs c. Method : 20 Point IRE
y IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 0, 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue according to each setting.
y Red/Green/Blue: The adjustment range is
-50 - +50. c. Method : 10 Point IRE
y Pattern: Inner, Outer
y IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 0, 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting.
y Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
y Red/Green/Blue: The adjustment range is
-50 - +50. Color Management System As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/
Blue/Cyan/Magenta/Yellow). Color difference may not be distinctive even when you make the adjustments for the general video. Adjusts Red/Green/Blue/Yellow/Cyan/Magenta. Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30. Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30. This feature is disable in RGB-PC and HDMI-PC mode. CUSTOMIZING SETTINGS 67 68 CUSTOMIZING SETTINGS AUDIO Settings 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT.
TIME Settings 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to TIME and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT.
The available audio settings are described in the following. The available time settings are described in the following Setting Clock Sets the time, date, time zone, and daylight-saving time feature. The time will be set automatically according to a digital channel signal which includes time information provided by the broadcasting station. If not, set the time and date manually. Description Off Time/On Time Sets the time to turn on or off the TV automatically. To use this function, you should set the current time and date in advance. NOTE E N E G N L G I S H E N E G N L G I S H Sleep Timer
y If you do not press any button within 2 hours after the TV turns on by the On Time feature, the TV enters the Standby mode automatically.
y If you set both Off time and On time features to the same time, the Off time feature overrides the On time feature. Sets the length of time until the TV to turns off. When you turn the TV off and turn it on again, the Sleep timer faature will be set to off. Setting Auto Volume Activates the Auto Volume feature to keep the volume level consistent whenever you change channels. The volume level may not be consistent due to different signal conditions of broadcasting stations. Description Clear Voice II Sets whether to enhance human voice clarity. You can adjust the level of clarity when you set this feature on. Balance Adjusts balance between the left and right speakers according to your room environment. Sound Mode Selects one of the preset sound modes or customizes options in each mode. Mode Standard Music Cinema Sport Game NOTE Select when you want standard-quality sound. Select when you listen to music. Select when you watch movies. Select when you watch sports events. Select when you play games.
y If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amplifier to cope with different user environments.
y If the Clear Voice II feature is on, Infinite Surround will not be activated. Option Infinite Surround Treble Bass Reset Infinite Surround is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound with just two front speakers. Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. Controls the softer sounds in the output. When you turn up the bass, it will increase the output to the lower frequency range. Resets the sound mode to the default setting. TV Speaker Turns on the internal speaker of the TV when using an external Hi-Fi system. You can use the TV speaker as an audio output device even if there is no video input. CUSTOMIZING SETTINGS 69 70 CUSTOMIZING SETTINGS LOCK Settings 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to LOCK and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available lock settings are described in the following. Setting Description Lock System Activates or deactivates the lock system.
Set Password Block Channel Changes the 4-digit password. The default PIN is 0 0 0 0. If you forget your password, press 0-3-2-5 on the remote control. Blocks the channels that contain inappropriate contents for children by pressing the Yellow button. The Lock icon appears in front of the blocked channels. The channels can be selected but the screen blank and the audio is muted. To watch a locked channel, enter the password. Movie Rating Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating. Rating G PG PG-13 R NC-17 X General audiences All ages admitted Parental guidance suggested Some material may not be suitable for children Patents strongly cautioned Some material may be inappropriate for children under 13 Restricted Under 17 requires accompanying parent or adult guardian No one 17 and under admitted Adults only TV Rating-
Children
(Depending on model) Blocking Off Permits all programs Blocks the childrens TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature. Rating Age TV-Y (All children, including children from ages 2-6) TV-Y7 (Directed to older children, suitable for children age 6 and above) Fantasy Violence TY-Y7 (Directed to older children Fantasy violence, suitable for children age 6 and above, containing more intense or combative fantasy violence) Setting TV Rating-
General
(Depending on model) Description Blocks the TV programs that you want based on the ratings by using the Parental Control Function
(V-Chip). NOTE
y The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children. Rating Age TV-G (General audience, suitable for all ages) TV-PG (Parental guidance suggested, containing material that are unsuitable for younger children) TV-14 (Parents strongly cautioned, containing material that are unsuitable for children age 14 and under) TV-MA (Mature audience only, unsuitable for children age under 17) TV Rating-
English
(Depending on model) E N E G N L G I S H E N E G N L G I S H Dialog
(suggestive dialogue) Language
(coarse language) Sex
(sexual situation) TV-PG or TV-14 TV-PG, TV-14, or TV-MA TV-PG, TV-14, or TV-MA Violence TV-PG, TV-14, or TV-MA Selecting Canadian English rating system. Rating E C C8+
G PG 14+
18+
Exempt Children Children eight years and older General programming, suitable for all audiences Parental Guidance Viewers 14 years and older Adult programming TV Rating-
French
(Depending on model) Blocking Off Permits all programs Selecting Canadian French rating system. Rating E G 8ans+
13ans+
16ans+
18ans+
Exempt General General-Not convenient for little children Not convenient for children of 13 years and younger Not convenient for children of 16 years and younger This programs is only for adults Blocking Off Permits all programs Downloadable Rating This function operates only when TV has received Region5 Rating data. The name of the rating option may differ. NOTE
y This feature is available only for digital channels. Input Block Key Lock Blocks the input sources. Locks or unlocks the buttons on the TV. CUSTOMIZING SETTINGS 71 72 CUSTOMIZING SETTINGS OPTION Settings 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT.
The available general settings are described in the following. Setting Description Language Selects a desired language. Option Menu Language Audio Language Selects a language for the display text. Selects an audio language for your program. This feature operates only in the DTV or CADTV mode. Caption Sets whether to display captions and customize your option in each mode. Mode CC 1-4 (Closed Captioning) Text 1-4 Service 1-6 Option (For DTV, CADTV) Size Font Text Color Text Opacity Bg Color Bg Opacity Edge Type Edge Color Displays the audio portion of a TV program as text on the TV screen. CC1 is the most common mode in use.
- Field 1 data channels: two Captions (CC1, CC2) and two Text (T1, T2).
- Field 2 data channels: two Captions (CC3, CC4) and two Text (T1, T2). This is only available for the digital broadcasting system. E N E G N L G I S H E N E G N L G I S H Selects the word size. Selects a typeface for the text. Selects a color for the text. Adjusts the opacity for the text color. Selects a background color. Adjusts the opacity for the background color. Selects an edge type. Selects a color for the edges. Power Indicator
(LED LCD TV) Sets to turn on or off the indicator light on the TV. Option Standby Light Power Light Sets to turn on or off the indicator light in Standby mode. Sets to turn on or off the indicator light when you turn on the power. Setting Description ISM Method
( Plasma ) Prevents image sticking or removes a ghost image. A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. Mode Normal Orbiter Color Wash White Wash Sets it if image sticking is never a problem. Avoids a ghost image on the screen. The image will move every 2 minutes to help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. Removes a ghost image on the screen. The color block with the screen moved a little and the white pattern are alternately displayed. It is difficult to see the after image on all colors. Once it has been corrected it will not be visible in any color. Removes a ghost image on the screen. Use sparingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own. NOTE
y An excessive ghosted image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button. Initial Setting Resets the TV to factory default and erases all stored channels. Customizes the TV settings to suit your preference. The initial setup screen will appear when you turn on the TV for the first time. NOTE
y When selecting Lock System - Onin the LOCK menu, the message to enter the password appears.
y If you forget your password, press 0-3-2-5 on the remote control. Setting Language Mode Setting Selects a desired language. Selects Home Use for the home environment. Selects Store Demo for the retail environment. Selects Demo Mode to set to show special features of the TV. You can cancel the demo mode by pressing any buttons except the Volume and Mute buttons. NOTE
y When selecting Store Demo, Demo Mode will be activated. Power Indicator
(LED LCD TV) Time Zone Auto Tuning Turns the power indicator light on or off. Sets the time zone and daylight saving. Scans and saves available channels automatically. Set ID Adds an ID to the connected devices. Mode Setting Default selection is Home Use. We recommend setting the TV to Home Use mode for the best picture in your home environment. Option Home Use Store Demo Demo Mode Selects it for the home environment. Selects it for the retail environment. Sets to show special features of the TV. You can cancel the demo mode by pressing any buttons except the Volume and Mute buttons. MAKING CONNECTIONS Connection Overview MAKING CONNECTIONS 73 74 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information of external devices connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE
y If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.
y The external device connection may differ from the model.
y Connect external devices to the TV regardless of the order of the TV port. Connect external devices to the TV by referring to the following table. Connection type HDMI (highly recommended) DVI Component Composite RGB Optical audio Video Audio Digital Analog Digital Analog O O
O O O
O
O
O O O O
Connect various external devices to the ports on the TV back panel. 1 Find an external device you want to connect to your TV as shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver DVD VCR Speaker E N E G N L G I S H E N E G N L G I S H USB PC Gaming device HDMI See p.75 DVI See p.75 Component See p.76 Composite See p.76 Digital See p.79 RGB See p.78 Memory storage See p.79 Memory card reader See p.79 NOTE
y If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y Refer to the external equipments manual for operating instructions. MAKING CONNECTIONS 75 76 MAKING CONNECTIONS DVI to HDMI Connection Component Connection Composite Connection
y This part of MAKING CONNECTIONS mainly uses picture for PW350, LV3500 series. Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE
y Use the latest High Speed HDMI Cable with CEC (Customer Electronics Control) function.
y High Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher. PW350 series Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. PW350 series N I T N E N O P M O C
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) AUDIO IN AUDIO IN
(RGB/DVI)
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 LV3500 series ANTENNA
/CABLE IN AUDIO OUT DVI OUT N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) AUDIO IN
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 N I T N E N O P M O C LV3500 series OPTICAL DIGITAL AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE)
/ DVI IN 2 1 COMPONENT IN
(RGB/DVI) AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I RR A U D O I Y P B P R L R 2 1 PTICAL DIGIT OPTICAL DIGITAL TICAL DIGIT AUDIO OUT ANTENNA/
ANTENNA ANTENNA CABLE IN ANTENNA /
CABLE IN LAN ANTENNA
/CABLE IN HDMI OPTICAL DIGITAL AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE) COMPONENT IN
(RGB/DVI)
(RGB/DVI) AUDIO IN AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I RR A U D O I Y P B P R L R ANTENNA /
CABLE IN
/ DVI IN 2 1 2 1 LAN OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT AUDIO OUT AUDIO OUT DVI OUT N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. PW350 series
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) AUDIO IN
(RGB/DVI) 2 1 REMOTE CONTROL IN Y Y PB PB PR PR L L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R R 2 1 L R VIDEO AUDIO LV3500 series N I T N E N O P M O C E N E G N L G I S H E N E G N L G I S H OPTICAL DIGITAL AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE)
/ DVI IN 2 1 COMPONENT IN
(RGB/DVI) AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I R A U D O I Y Y P P B B P P R R L L R R 2 1 OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT AUDIO OUT ANTENNA/
ANTENNA ANTENNA CABLE IN ANTENNA /
CABLE IN LAN L R VIDEO AUDIO NOTE NOTE
y If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. ANTENNA
/CABLE IN PW350 series
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO VIDEO AV IN 1 AV IN 1 L/MONOOO L/MONO AUDIO AUDIO RRR R RGB IN (PC) AUDIO IN
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 N I T N E N O P M O C ANTENNA
/CABLE IN N I B S U LV3500 series 3 N I
P H 2 N I V A I O D U A
O E D V I VIDEO L
MONO
) AUDIO R COMPONENT IN OPTICAL DIGITAL AUDIO OUT
(RGB/DVI) AUDIO IN AV IN 1 AV IN 1 I V D E O RGB IN(PC) RS-232C IN(CONTROL & SERVICE) I I V V D D E E O O L L
M M O O N N O O
) A A U U D D O O I I RR R
/ DVI IN 2 1 LAN A U D O LAN I Y P B P R L R ANTENNA /
CABLE IN 2 1 OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT AUDIO OUT ANTENNA/
ANTENNA ANTENNA CABLE IN R AUDIO L
( ) MONO VIDEO N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I
y If cables are installed incorrectly, it could case the image to display in black and white or with distorted color. Check to ensure the cable are matched with the corresponding color connection.
(For only 32LV2500, LV3500 series) OPTICAL DIGITAL AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE) COMPONENT IN
(RGB/DVI) AUDIO IN AV IN 1 I V D E O I V D E O L L L L L
M M M M M O O O O O N N N N N O O O O O
) A U D O I RR A U D O I Y P B P R L R ANTENNA /
CABLE IN
/ DVI IN 2 1 2 1 N I B S U 3 N I
P H 2 2 N N I I V V A A I I O O D D U U A A
O O E E D D V V I I HDMI VIDEO L (MONO) AUDIO R Connecting to a PC DVI to HDMI Connection RGB Connection MAKING CONNECTIONS 77 78 MAKING CONNECTIONS Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the DVI-
HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin signal cable as shown in the following illustrations. To transmit an audio signal, connect an optional audio cable. PW350 series PW350 series
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) AUDIO IN AUDIO IN
(RGB/DVI)
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 N I T N E N O P M O C ANTENNA
/CABLE IN AUDIO OUT DVI OUT
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) RGB IN (PC) AUDIO IN AUDIO IN
(RGB/DVI)
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 N I T N E N O P M O C ANTENNA
/CABLE IN RGB OUT (PC) AUDIO OUT LV3500 series N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I E N E G N L G I S H E N E G N L G I S H OPTICAL DIGITAL AUDIO OUT RGB IN (PC) RGB IN(PC) RS-232C IN(CONTROL & SERVICE)
/ DVI IN 2 1 COMPONENT IN
(RGB/DVI)
(RGB/DVI) AUDIO IN AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I RR A U D O I Y P B P R L R 2 1 OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT AUDIO OUT ANTENNA/
ANTENNA ANTENNA CABLE IN ANTENNA /
CABLE IN RGB OUT (PC) AUDIO OUT N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I NOTE
y To get the the best picture quality, adjust the PC graphics card to LCD Model 22LV2500, 22LV2520, LV3500, LK430, LK450, LK520 series Other models Resolution 1920x1080 1360x768 Plasma Model PZ200 series Other models Resolution 1920x1080 1024x768
y Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
y If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
y Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen.
y The synchronization input form for Horizontal and Vertical frequencies is separate.
y Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
y When selecting HDMI-PC, set the Input Label - PC in the INPUT menu. This TV supports the Plug & Play. A PC will automatically recognize the TV and requires no driver to be installed. Connect the TV according to your PC by referring to the following table. HDMI
(highly recommended) RGB Video O (Digital) Audio O (Digital) NOTE O (Analog) X
y It is recommended to use the TV set with the HDMI connection for the best image quality. HDMI Connection Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustration. LV3500 series PW350 series
/DVI IN OPTICAL DIGITAL AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) AUDIO IN
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 LV3500 series N I T N E N O P M O C OPTICAL DIGITAL AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE)
/ DVI IN 2 1 COMPONENT IN
(RGB/DVI) AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I RR A U D O I Y P B P R L R 2 1 OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT AUDIO OUT ANTENNA/
ANTENNA ANTENNA CABLE IN ANTENNA /
CABLE IN LAN OPTICAL DIGITAL AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE) COMPONENT IN
(RGB/DVI)
(RGB/DVI) AUDIO IN AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I RR A U D O I Y P B P R L R ANTENNA /
CABLE IN
/ DVI IN 2 1 2 1 LAN OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT AUDIO OUT AUDIO OUT DVI OUT ANTENNA
/CABLE IN HDMI N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I HDMI MAKING CONNECTIONS 79 80 MAKING CONNECTIONS Connecting to a USB SIMPLINK Connection Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files. See "Connecting USB storage devices" on p.50 and
"Browsing files" on p. 51. Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. but only devices with the logo are fully supported. 3 N I
P P H H E N E G N L G I S H E N E G N L G I S H Activating and Using the SIMPLINK menus Connecting to an Audio System Use an optional external audio system instead of the built-in speaker. NOTE
y If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off (See p.67). Digital optical audio connection Transmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. PW350 series N N I I B B S S U U or 3 N I Connecting to a Headphone
( LCD ) Listen to the sound through a headphone.
/DVI IN OPTICAL OPTICAL DIGITAL DIGITAL AUDIO OUT AUDIO OUT VIDEO AV IN 1 L/MONOOO AUDIO RRR RGB IN (PC) AUDIO IN
(RGB/DVI) 2 1 REMOTE CONTROL IN Y PB PR L RS-232C IN
(CONTROL & SERVICE) VIDEO AUDIO R 2 1 N I T N E N O P M O C ANTENNA
/CABLE IN NT IN ANTENNA /
CABLE IN 1 2 N I V A I O D U A
O E D V I OPTICAL AUDIO IN LV3500 series OPTICAL OPTICAL DIGITAL DIGITAL AUDIO OUT AUDIO OUT RGB IN(PC) RS-232C IN(CONTROL & SERVICE) COMPONENT IN
(RGB/DVI) AUDIO IN AV IN 1 I V D E O I V D E O
L M O N O A U D O I RR A U D O I Y P B P R L R ANTENNA /
CABLE IN
/ DVI IN 2 1 2 1 OPTICAL AUDIO IN N I B S U 3 N I
P H 2 N I V A I O D U A
O E D V I NOTE
y AUDIO menu options are disabled when connecting a headphone.
y When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
y Optical Digital Audio Out is not available when connecting a headphone.
y Headphone impedance: 16 :
y Max audio output: 10 mW to 15 mW
y Headphone jack size: 0.32 cm (1/8 inch) Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. 5 NOTE
y If the connected device does not support HDMI-CEC, the SIMPLINK feature is unavailable.
y To operate SIMPLINK, you should use an High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
y SIMPLINK may not work properly if you a third-party device that has an HDMI-CEC function. 1 Press SIMPLINK to access the SIMPLINK menus. 2 Press the Navigation buttons to select to On. 3 Press the Navigation buttons to scroll to one of the devices and press ENTER.
1 2 3 4 5 No. 1 Displays the previously viewed TV channel. Description 2 Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen. 3 Controls the connected VCR. 4 HDD recordings playback: Controls the recording stored in HDD. Audio out to home theater speaker or Audio out to TV: Changes the audio output between Home theater speaker and TV speaker.
- A check mark appears in front of the selected device.
- Available devices display in a bright color.
- Unavailable devices display in grey. 4 Control the selected AV device.
- Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
- Select AV device: Enables you to select one of the AV devices connected to the TV.
- Disc playback: Control connected AV devices by pressing the Navigation buttons, ENTER,
, , , and .
- Power off all devices: When you power off the TV, all connected devices are turned off.
- Switch audio-out: Offers an easy way to switch audio-out.
- Sync Power on: When the equipment with SIMPLINK function connected HDMI terminal starts to play, The TV will automatically turn on. NOTE
y If you change the input source by pressing INPUT, the progressing function of the SIMPLINK device will stop.
y If you select a device that has the home theater feature, the sound output automatically switches to the home theater speaker and the TV speaker turns off.
y If a connected SIMPLINK home theater system does not play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the rear of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an optical cable. MAINTENANCE 81 82 TROUBLESHOOTING CAUTION
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
y Do not use any chemicals as this may deteriorate the surface. Power cord Remove the accumulated dust or dirt on the power cord regularly. Preventing Image burn or Burn-in on your TV screen TROUBLESHOOTING General Problem Cannot control the TV with the remote control. Resolution
y Check the remote control sensor on the product and try again.
y Check if there is any obstacle between the product and the remote control.
y Check if the batteries are still working and properly installed (
to
y Check if the appropriate input mode such as TV or VCR is set for using the to
, remote control.
). No image display and no sound is produced. Image appears slowly when the TV turns on.
y Check if the product is turned on.
y Check if the power cord is connected to a wall outlet.
y Check if there is a problem in the wall outlet by connecting other products.
y The image is muted during the product startup process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If the image still does not appear, contact the authorized service center in your local area. Cannot connect external devices. The TV turns off suddenly.
y Refer to the "Connection Overview" and connect an external device.
y Check the power control settings. The power supply may be interrupted.
y Check if the Auto sleep feature is activated in the Time settings.
y If there is no signal while the TV is on, the TV will turn off automatically after Refer to the "Sleep Timer". 15 minutes of inactivity.
y If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.
y If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
y Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn. E N E G N L G I S H E N E G N L G I S H Audio Problem No sound is produced while images are displaying. Resolution
y Press VOL + or - button.
y Check if the sound is muted by pressing MUTE.
y Scroll to other channels. There may a problem with the broadcast.
y Check if the TV Speaker feature is activated in the menu option. No output from one of the speakers y Adjust Balance in the menu option. Unusual sound from inside the TV is produced.
y A change in ambient humidity or temperature may result in an unusual noise when the product turns on or off. There is no problem with your product. MAINTENANCE Update and clean your TV regularly to keep the best performance and to extend the product lifespan. Cleaning Your TV CAUTION
y Make sure to turn the power off and disconnect the power cord and all other cables first.
y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION
y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.
y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may as these may damage the screens finish and cause discoloration. Cabinet and stand To remove dust or light dirt, wipe the cabinet with a dry, clean, and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. Then wipe immediately with a dry cloth. TROUBLESHOOTING 83 84 SPECIFICATIONS Video Problem An image displays in black and white or the color quality is poor. Resolution
y Adjust the color setting in the menu option.
y Keep a sufficient distance between this product and other electronic products.
y Scroll to other channels. There may a problem with the broadcast.
y Check if there are local interferences such as an electrical appliance or power Horizontal or vertical bars appears or images blur Lines or streaks appear on images y Check the antenna or aim the antenna to the proper direction. tool. Afterimages (ghosts) appear when the product turns off
y Pixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen. The power is on but the screen appears extremely dark. No Signal appears on the screen. y Check if the signal cable is connected between the TV and products properly.
y Adjust the brightness and contrast in the menu option. Black spots appear on the screen. The display offset is wrong.
y Check the selected input source by pressing INPUT.
y Several pixels in red, green, white, or black may appear on the screen that can attribute to the characteristics of the LCD panel.
y This is normal.
y Adjust the position setting in the Picture menu.
y Check if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution using the display settings on the external device. Thin lines appear in the background of the screen.
y Check the video cable connections. Horizontal noises appear or characters blur.
y Adjust the Phase setting in the menu option. Refer to the SCREEN (RGB-PC). The reception on some channels is poor
y Scroll to other channels. There may a problem with the broadcast.
y The station signal may be weak. Aim the antenna to the proper direction.
y Check if there is local interferences such as an electrical appliance or power tool. SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 0 - 40 C Operating Humidity Less than 80 %
Storage Temperature
-20 - 60 C Storage Humidity Less than 85 %
E N E G N L G I S H E N E G N L G I S H MODELS 42PW340
(42PW340-UB) 42PW350
(42PW350-UE) 42PW350U
(42PW350U-UC) 42PW350R
(42PW350R-UA) 50PW340
(50PW340-UB) 50PW350
(50PW350-UE) 50PW350U
(50PW350U-UC) 50PW350R
(50PW350R-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 991.8 mm x 667.0 mm x 230.5 mm
(39.0 inch x 26.2 inch x 9.0 inch) 1176.1 mm x 774.7 mm x 289.8 mm
(46.3inch x 30.5 inch x 11.4 inch) 991.8 mm x 613.8 mm x 52.5 mm
(39.0 inch x 24.1 inch x 2.0 inch) 1176.1 mm x 716.5 mm x 52.5 mm
(46.3 inch x 28.2 inch x 2.0 inch) 21.5 kg (47.3 lbs) 20.0 kg (44.0 lbs) 2.3 A / 230 W 29.6 kg (65.2 lbs) 27.3 kg (60.1 lbs) 3.0 A / 300 W AC100 - 240 V ~ 50/60 Hz MODELS 50PZ200
(50PZ200-UA) 60PZ200
(60PZ200-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 1171.9 mm x 770.9 mm x 289.8 mm
(46.1 inch x 30.3 inch x 11.4 inch) 1390.8 mm x 905.2 mm x 334.7 mm
(54.7 inch x 35.6 inch x 13.1 inch) 1171.9 mm x 712.2 mm x 52.5 mm
(46.1 inch x 28.0 inch x 2.0 inch) 1390.8 mm x 835.5 mm x 52.5 mm
(54.7 inch x 32.8 inch x 2.0 inch) 29.8 kg (65.6 lbs) 27.5 kg (60.6 lbs) 42.6 kg (93.9 lbs) 38.5 kg (84.8 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz SPECIFICATIONS 85 86 SPECIFICATIONS MODELS With stand Without stand With stand Without stand Dimensions
(W x H x D) Weight Power requirement Adapter (DC Power) Dimensions
(W x H x D) Weight MODELS With stand Without stand With stand Without stand Power requirement MODELS Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 19LV2520
(19LV2520-UA) 19LV2500
(19LV2500-UA) 22LV2520
(22LV2520-UA) 22LV2500
(22LV2500-UA) 26LV2520
(26LV2520-UA) 26LV2500
(26LV2500-UA) 455.2 mm x 355.0 mm x 145.0 mm
(17.9 inch x 13.9 inch x 5.7 inch) 471.2 mm x 365.9 mm x 155.4 mm
(18.5 inch x 14.4 inch x 6.1 inch) 635.6 mm x 475.0 mm x 169.0 mm
(25.0 inch x 18.7 inch x 6.6 inch) 455.2 mm x 313.1 mm x 40.9 mm
(17.9 inch x 12.3 inch x 1.6 inch) 471.2 mm x 315.5 mm x 40.9 mm
(18.5 inch x 12.4 inch x 1.6 inch) 635.6 mm x 413.5 mm x 40.9 mm
(25.0 inch x 16.2 inch x 1.6 inch) 2.7 kg (5.9 lbs) 2.5 kg (5.5 lbs) 24 V
, 1.4 A 3.4 kg (7.4 lbs) 3.2 kg (7.0 lbs) 24 V
, 1.7 A 5.4 kg (11.9 lbs) 5.0 kg (11.0 lbs) 24 V
, 1.8 A In: AC 100-240 V ~ 50/60 Hz Out: DC 24 V, 2.5 A 32LV2500
(32LV2500-UA) 777.0 mm x 552.0 mm x 234.0 mm
(30.5 inch x 21.7 inch x 9.2 inch) 777.4 mm x 501.0 mm x 35.4 mm
(30.5 inch x 19.7 inch x 1.3 inch) 11.4 kga (25.1 lbs) 9.6 kg (21.1 lbs) AC100 - 240 V ~ 50/60 Hz 32LV3500
(32LV3500-UA) 37LV3500
(37LV3500-UA) 764.0 mm x 545.0 mm x 240.0 mm
(30.0 inch x 21.4 inch x 9.4 inch) 888.0 mm x 614.0 mm x 240.0 mm
(34.9 inch x 24.1 inch x 9.4 inch) 764.0 mm x 484.0 mm x 35.4 mm
(30.0 inch x 19.0 inch x 1.3 inch) 888.0 mm x 533.0 mm x 35.4 mm
(34.9 inch x 20.9 inch x 1.3 inch) 11.4 kg (25.1 lbs) 9.6 kg (21.1 lbs) 13.1 kg (28.8 lbs) 11.3 kg (24.9 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz MODELS 42LV3500
(42LV3500-UA) 47LV3500
(47LV3500-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 998.0 mm x 684.0 mm x 256.0 mm
(39.2 inch x 26.9 inch x 10.0 inch) 1107.0 mm x 745.5 mm x 256.3 mm
(43.5 inch x 29.3 inch x 10.0 inch) 998.0 mm x 615.0 mm x 30.4 mm
(39.2 inch x 24.2 inch x 1.1 inch) 1107.0 mm x 676.5 mm x 40.1 mm
(43.5 inch x 26.6 inch x 1.5 inch) 15.5 kg (34.1 lbs) 13.3 kg (29.3 lbs) 20.9 kg (46.0 lbs) 18.7 kg (41.2 lbs) Power requirement MODELS Dimensions
(W x H x D) Weight Power requirement With stand Without stand With stand Without stand AC100 - 240 V ~ 50/60 Hz 55LV3500
(55LV3500-UA) 1286.0 mm x 847.0 mm x 338.0 mm
(50.6 inch x 33.3 inch x 13.3 inch) 1286.0 mm x 847.0 mm x 30.4 mm
(50.6 inch x 33.3 inch x 1.1 inch) 25.5 kg (56.2 lbs) 21.4 kg (47.1 lbs) AC100 - 240 V ~ 50/60 Hz MODELS 22LK330
(22LK330-UA) 26LK330
(26LK330-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 526.0 mm x 377.0 mm x 164.9 mm
(20.7 inch x 14.8 inch x 6.4 inch) 663.0 mm x 484.0 mm x 206.8 mm
(26.1 inch x 19.0 inch x 8.1 inch) 526.0 mm x 331.0 mm x 65.0 mm
(20.7 inch x 13.0 inch x 2.5 inch) 663.0 mm x 423.0 mm x 79.9 mm
(26.1 inch x 16.6 inch x 3.1 inch) 4.3 kg (9.4 lbs) 4.0 kg (8.8 lbs) 7.3 kg (16.0 lbs) 6.2 kg (13.6 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz Dimensions
(W x H x D) Weight MODELS With stand Without stand With stand Without stand Power requirement 32LK330
(32LK330-UA) 805.0 mm x 583.0 mm x 224.0 mm
(31.6 inch x 22.9 inch x 8.8 inch) 805.0 mm x 528.0 mm x 79.9 mm
(31.6 inch x 20.7 inch x 3.1 inch) 10.8 kg (23.8 lbs) 9.7 kg (21.3 lbs) AC100 - 240 V ~ 50/60 Hz E N E G N L G I S H E N E G N L G I S H MODELS 32LK430
(32LK430-UA) 42LK430
(42LK430-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 799.0 mm x 555.0 mm x 207.0 mm
(31.4 inch x 21.8 inch x 8.1 inch) 1023.0 mm x 685.0 mm x 261.0 mm
(40.2 inch x 26.9 inch x 10.2 inch) 799.0 mm x 506.0 mm x 73.5 mm
(31.4 inch x 19.9 inch x 2.8 inch) 1023.0 mm x 635.0 mm x 76.6 mm
(40.2 inch x 25.0 inch x 3.0 inch) 9.1 kg (20.0 lbs) 8.1 kg (17.8 lbs) 15.1 kg (33.2 lbs) 13.5 kg (29.7 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz MODELS 32LK450
(32LK450-UB) 37LK450
(37LK450-UB) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 795.0 mm x 568.0 mm x 207.0 mm
(31.2 inch x 22.3 inch x 8.1 inch) 913.0 mm x 639.0 mm x 265.0 mm
(35.9 inch x 25.1 inch x 10.4 inch) 795.0 mm x 504.0 mm x 73.5 mm
(31.2 inch x 19.8 inch x 2.8 inch) 913.0 mm x 571.0 mm x 77.4 mm
(35.9 inch x 22.4 inch x 3.0 inch) 9.2 kg (20.2 lbs) 8.1 kg (17.8 lbs) 12.8 kg (28.2 lbs) 11.1 kg (24.4 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz MODELS 42LK450
(42LK450-UB) 47LK450
(47LK450-UB) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 1019.0 mm x 698.0 mm x 265.0 mm
(40.1 inch x 27.4 inch x 10.4 inch) 1132.0 mm x 762.0 mm x 265.0 mm
(44.5 inch x 30.0 inch x 10.4 inch) 1019.0 mm x 631.0 mm x 76.5 mm
(40.1 inch x 24.8 inch x 3.0 inch) 1132.0 mm x 695.0 mm x 76.5 mm
(44.5 inch x 27.3 inch x 3.0 inch) 15.1 kg (33.2 lbs) 13.4 kg (29.5 lbs) 19.0 kg (41.8 lbs) 17.3 kg (38.1 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz SPECIFICATIONS 87 88 SPECIFICATIONS RGB (PC), HDMI (PC) supported mode ( Plasma ) Component port connecting information Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Component ports on the TV Y Y Y Y Y PB PR PB B-Y Cb Pb PR R-Y Cr Pr Video output ports on DVD player Component supported mode ( Plasma LCD ) Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 MODELS 42LK520
(42LK520-UA) 47LK520
(47LK520-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 1019.0 mm x 698.0 mm x 265.0 mm
(40.1 inch x 27.4 inch x 10.4 inch) 1137.0 mm x 758.0 x 270.0 mm
(44.7 inch x 29.8 inch x 10.6 inch) 1019.0 mm x 631.0 mm x 76.5 mm
(40.1 inch x 24.8 inch x 3.0 inch) 1137.0 mm x 685.0 mm x 76.8 mm
(44.7 inch x 26.9 inch x 3.0 inch) 15.1 kg (33.2 lbs) 13.4 kg (29.5 lbs) 20.3 kg (44.7 lbs) 18.3 kg (40.3 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz Dimensions
(W x H x D) Weight MODELS With stand Without stand With stand Without stand Power requirement 55LK520
(55LK520-UA) 1329.0 mm x 872.0 mm x 330.0 mm
(52.3 inch x 34.3 inch x 12.9 inch) 1329.0 mm x 796.0 mm x 96.5 mm
(52.3 inch x 31.3 inch x 3.7 inch) 33.0 kg (72.7 lbs) 28.8 kg (63.4 lbs) AC100 - 240 V ~ 50/60 Hz MODELS 32LV3520
(32LV3520-UA) 42LV3520
(42LV3520-UA) Dimensions
(W x H x D) Weight With stand Without stand With stand Without stand 764.0 mm x 545.0 mm x 240.0 mm
(30.0 inch x 21.4 inch x 9.4 inch) 998.0 mm x 684.0 mm x 256.0 mm
(39.2 inch x 26.9 inch x 10.0 inch) 764.0 mm x 484.0 mm x 35.4 mm
(30.0 inch x 19.0 inch x 1.3 inch) 998.0 mm x 615.0 mm x 30.4 mm
(39.2 inch x 24.2 inch x 1.1 inch) 11.4 kg (25.1 lbs) 9.6 kg (21.1 lbs) 15.5 kg (34.1 lbs) 13.3 kg (29.3 lbs) Power requirement AC100 - 240 V ~ 50/60 Hz E N E G N L G I S H E N E G N L G I S H RF module (BM-LDS201) specification (For PW340, PW350, PW350U, PW350R, PZ200 series) For TV By using a 2.4 GHz bandwidth radio frequency(RF).
y Output: 1 dBm or lower
y Maximum Communication Distance: 10 m (30 ft) in an open space
y Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)
y Transfer Rate: 250 kbps
y FCC ID of RF module inside TV FCC ID: BEJLDS201 720x400 640x480 800x600 1024x768 1360x768 1280x1024 1920x1080 RGB-PC 1920x1080 HDMI-PC 31.469 31.469 37.879 48.363 47.712 63.981 66.587 67.5 For 50/60PZ200 70.08 59.94 60.31 60.00 60.015 60.02 59.934 60.00 RGB (PC), HDMI (PC) supported mode ( LCD ) Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720x400 640x480 800x600 1024x768 1360x768 1280x768 RGB-PC 31.469 31.469 37.879 48.363 47.712 47.776 1280x1024 63.981 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 67.5 70.08 59.94 60.31 60.00 60.015 59.870 60.02 59.934 60.00 22LV2500, 22LV2520, 32/37/42/47/55LV3500, 32/42LK430, 32/37/42/47LK450, 42/47/55LK520 HDMI (DTV) supported mode ( Plasma LCD ) Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 SPECIFICATIONS 89 90 IR CODES Video Supported Formats File Extension name mpg, mpeg dat ts, trp, tp vob mp4, mov divx, avi Motion JPEG
(avi, mp4, mkv) asf, wmv flv Video Decoder Audio Codec Max Resolution MPEG1, MPEG2 MPEG1 MPEG2, H.264, AVS, VC1 MPEG1, 2 MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 MPEG2, MPEG4, DivX 3.11, DivX 4, DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 MP2, MP3, Dolby Digital, LPCM MP2 MP2, MP3, Dolby Digital, AAC, HE-AAC MP2, MP3, Dolby Digital, LPCM AAC, HE-AAC, MP3 MP2, MP3, Dolby Digital, AAC HE-AAC, LPCM MP2, MP3, Dolby Digital, LPCM, ADPCM, AAC, HE-AAC 1920 x 1080 @ 30p
(Only Motion JPEG 640x480@30p) JPEG VC1 Sorenson H.263, H264 LPCM, ADPCM WMA MP3, AAC mkv H.264, MPEG-1,2,4 3D Supported Formats Signal Resolution 1280x720 720p 1080i 1080p HDMI Input E N E G N L G I S H E N E G N L G I S H Horizontal Frequency
(kHz) 44.96 / 45.00 89.90 / 90.00 33.72 / 33.75 67.432 / 67.50 Vertical Frequency
(Hz) 59.94 / 60.00 Playable 3D video format Top & Bottom, Side by Side HDMI 3D Frame Packing Top & Bottom, Side by Side Top & Bottom, Side by Side, Checker Board Single Frame Sequential 1920x1080 27.00 24.00 Top & Bottom, Side by Side, Checker Board 53.95 / 54.00 23.98 / 24.00 HDMI 3D Frame Packing 33.75 1080p 1920x1080 33.75 30.00 30.00 USB Input Resolution Other Resolution Top & Bottom, Side by Side Checker Board Top & Bottom, Side by Side Checker Board, MPO (Photo) Playable 3D video format Top & Bottom, Side by Side PC Input
(PZ200 series) 1920x1080 Component
(For Plasma TV) 1080i 720p Signal DTV 720p, 1080i 66.587 59.93 Top & Bottom, Side by Side 1280x720 44.96 / 45.00 59.94 / 60.00 1920x1080 33.72 / 33.75 59.94 / 60.00 Top & Bottom, Side by Side Playable 3D video format Top & Bottom, Side by Side IR CODES
(Depending on model) How to Connect Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Output waveform Single pulse, modulated with 37.917kHz signal at 455kHz Tc T1 Frame configuration 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame Lead code Repeat code Tf 9 ms 4.5 ms Repeat code 0.55 ms 9 ms 2.25 ms Bit description Bit 0 0.56 ms 1.12 ms Frame interval: Tf Bit 1 0.56 ms 2.24 ms The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz Code
(Hexa) 08 45 43 0B Function Note POWER Q.MENU Home INPUT Remote control Button
(Power On/Off) Remote control Button Remote control Button Remote control Button Code
(Hexa) 0F DC 5B D6 TV 3D EXIT TV 10 - 19 Number Key 0-9 Remote control Button C4 POWER ON 4C 1A 9 2 3 0 1 1E 40 41 7 6 44 28 79
- (Dash)/LIST Remote control Button FLASHBK Remote control Button C5 POWER OFF MUTE/DELETE Remote control Button VOL +
VOL -
CH ^
CH v FAV/MARK
v
ENTER BACK RATIO Remote control Button 5A AV1 Remote control Button Remote control Button D0 AV2 Remote control Button Remote control Button BF COMPONENT1 Remote control Button Remote control Button D4 COMPONENT2 Remote control Button Remote control Button D5 RGB-PC Remote control Button Remote control Button CE HDMI1 Remote control Button BA ( Plasma ) FREEZE Remote control Button CC HDMI2 95 7E AA 30 72 71 63 61 B1 B0 BA 8E 8F ENERGY SAVING Remote control Button SIMPLINK Remote control Button E9 HDMI3 INFO Remote control Button AV MODE Remote control Button DA HDMI4 RED GREEN Remote control Button Remote control Button 76 Ratio 4:3 YELLOW Remote control Button BLUE Q X
XX WW Remote control Button 77 Ratio 16:9 Remote control Button Remote control Button AF Ratio Zoom Remote control Button Remote control Button Remote control Button IR CODES 91 92 EXTERNAL CONTROL DEVICE SETUP Function Note EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the products functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Type of connector;
D-Sub 9-Pin Male 1 5 RS-232C IN
(CONTROL & SERVICE) E N E G N L G I S H E N E G N L G I S H NOTE
y RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C connection cables are not supplied with the product. 6 9 RS-232C IN
(CONTROL & SERVICE) No. Pin name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection Remote control Button Remote control Button Remote control Button Discrete IR Code
(TV Input Selection) Discrete IR Code
(Only Power On) Discrete IR Code
(Only Power Off) Discrete IR Code
(AV1 Input Selection) Discrete IR Code
(AV2 Input Selection) Discrete IR Code
(Component1 Input Selection) Discrete IR Code
(Component2 Input Selection) Discrete IR Code
(RGB-PC Input Selection) Discrete IR Code
(HDMI1 Input Selection) Discrete IR Code
(HDMI2 Input Selection) Discrete IR Code
(HDMI3 Input Selection) Discrete IR Code
(HDMI4 Input Selection) Discrete IR Code
(Only 4:3 Mode) Discrete IR Code
(Only 16:9 Mode) Discrete IR Code
(Only Zoom Mode) EXTERNAL CONTROL DEVICE SETUP 93 94 EXTERNAL CONTROL DEVICE SETUP RS-232C configurations 7-Wire Configuration
(Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 D-Sub 9 D-Sub 9 3-Wire Configurations(Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 D-Sub 9 D-Sub 9 3 2 5 6 4 8 7 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS TXD RXD GND DSR DTR CTS RTS Set ID Set ID number.
1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press ENTER. 3 Press the Navigation buttons to scroll to Set ID and press ENTER. 4 Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99. 5 When you are finished, press EXIT.
*Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 E N E G N L G I S H E N E G N L G I S H Communication Parameters
y Baud rate: 9600 bps (UART)
y Data length: 8 bits
y Parity : None
y Stop bit: 1 bit
y Communication code: ASCII code
y Use a crossed (reverse) cable. Command reference list COMMAND1 COMMAND2 DATA
(Hexadecimal) COMMAND1 COMMAND2 DATA
(Hexadecimal) 01. Power k 02. Input Select x 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness k k k k k k k k k 12. OSD Select k a b c d e f g h i j k l 00 - 01 14. Treble
(See p.96) 15. Bass
(See p.96) 16. Balance 00 - 01 17. 3D 00 - 01 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 01 18. Color Temperature 19. Extended 3D 20. ISM Method ( Plasma ) 21. Energy Saving 22. Auto Configuration 24. Channel Add/Del 25. Key 26. Backlight
( LCD ) k k k x x x j j j m m m r s t t u v p q u b c g 00 - 64 00 - 64 00 - 64
(See p.97) 00 - 64
(See p.97)
(See p.98)
(See p.98)
(See p.98) 00 - 01
(See p.98) 00 - 64 13. Remote Control Lock Mode k m 00 - 01 COMMAND1 COMMAND2 DATA00
(Hexadecimal) DATA01
(Hexadecimal) DATA02
(Hexadecimal) DATA03
(Hexadecimal) DATA04
(Hexadecimal) DATA05
(Hexadecimal) 23. Channel Tuning m a physical program high major program low major low minor high minor low attribute EXTERNAL CONTROL DEVICE SETUP 95 96 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the set is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data. Transmit the FF data to read status of command.
[Cr] : Carriage Return ASCII code 0x0D
[ ] : ASCII code space (0x20)
* In this model, set will not send the status during the standby mode. OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[OK] : Use the large character. E N E G N L G I S H E N E G N L G I S H Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-
viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[NG] : Use the large character 01. Power (Command: k a) 06. Volume Control (Command: k f) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
Data 01: Power On
* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, set will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Input Select (Command: x b) To select input source for set. Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV or AV1 Data 21: AV2 Data 40: Component or Component1 Data 41: Component2 Data 60: RGB-PC Data 91: HDMI2 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Data 90: HDMI1 Data 92: HDMI3
* Use the feature depending on your model. 03. Aspect Ratio (Command: k c) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 Data 02: 16:9 Data 04: Zoom Data 06: Set by program Data 1F: Cinema Zoom16 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Data: 09: Just scan Data: 10: Cinema Zoom 1 04. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on), Video-out Mute off Data 01: Screen mute on (Picture off) Data 10: Video-out Mute on Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD). 05. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i) To adjust screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j) To adjust screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP 97 98 EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
Data 01: OSD on 13. Remote Control Lock Mode (Command: k m) Data 01: Lock on To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If youre not using the remote control and front panel controls on the Monitor set, use this mode. When main power is on/off, remote control lock is released. If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV. 14. Treble (Command: k r) To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s) To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. 3D (Command: x t) (For 3D TV) To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][Cr]
Data1 00: 3D 01: 2D 02: 3D to 2D 03: 2D to 3D Data2 00: Top and Bottom 01: Side by Side 02: Check Board 03: Frame Sequential Data3 00: Right to Left 01: Left to Right Data4 3D Depth: Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
* If TV doesnt support 2D to 3D covert this value has no meaning. Acknowledgement [t][ ][OK][Data01][Data02]
[Data03][Data04][x][t][ ][NG][Data01][x]
18. Color Temperature (Command: x u) To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
19. Extended 3D (Command: x v) (For 3D TV) To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr]
Data1: 3D option 00: 3D Picture Correction 01: 3D Depth (2D to 3D Only) 02: 3D Viewpoint 03: 3D Picture Size 04: 3D Picture Balance 05: 3D Optimization Data2: It has own range for each 3D option determined by Data1. 1) When Data1 is 00 00: Right to Left 01: Left to Right 2) When Data1 is 01, 02 Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code) 3) When Data1 is 03 00: Just Scan 01: 16:9 4) When Data1 is 04 00: Off 01: On 5) When Data1 is 05 Data Min: 00 ~ Max: 02 (*transmit by Hexadecimal code) Acknowledgement [v][ ][OK][Data1][Data2][x]
[v][ ][NG][Data1][x]
* Use the feature depending on your model. E N E G N L G I S H E N E G N L G I S H 20. ISM Method (Command: j p) ( Plasma ) To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter 04: White Wash 08: Normal 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.
* 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 24. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
25. Key (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
When TV is in the standby mode, TV will turn on by POWER button of remote control only. 26. Backlight (Command: m g) ( LCD ) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
21. Energy Saving (Command: j q) To control the energy saving function. Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: off 01: Minimum 02: Medium 03: Maximum 04: Auto/Intelligent sensor (depending on model) 05: Screen off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
22. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
23. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data 01 & 02: Major Channel Number Data 01: High byte Two bytes are available for the Major and Minor, normally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. Data 02: Low byte The table above lists the binary code which must be converted to Hexadecimal before sending. For example:
The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.
* 7th bit : For which source do you want to change the channel. EXTERNAL CONTROL DEVICE SETUP 99 100 OPEN SOURCE LICENSE
* Table List (Channel Tuning) 7 Main/Sub Picture 0 1 Main Sub Two/One Part Channel Two One Using Physical Channel Use No Use 5 0 1 6 0 1 4 Reserved 3 2 1 0 Step x x x x x x x x x x 0 0 0 0 0 0 0 0 x 1 0 0 0 0 1 1 1 1 x 1 0 0 1 1 0 0 1 1 x 1 0NTSC Air 1NTSC Cable 0ATSC Air 1ATSC Cable_std 0ATSC Cable_hrc 1ATSC Cable_irc 0ATSC cable_auto 1Reserved x
... 1Reserved OPEN SOURCE LICENSE Open source software notice Please be informed that LG Electronics products may contain open source software listed in the tables below. License OpenSSL license MIT license expat license Freetype license JPEG license Zlib/libpng license Component
- openssl
- libcurl
- ncurses
- expat
- freetype
- libjpeg
- md5 checksum
- libmng
- libpng
- tinyxml
- zlib E N E G N L G I S H E N E G N L G I S H X.net license BSD license RSA data security license
- libicu
- strace
- xySSL
- MD5 LG Electronics products may also contain open source software listed as Components in the table below, and you may download the complete source code thereof free of charge, from LG Electronics website
(http://opensource.lge.com) for a period of three (3) years from our last shipment of this product. Please be informed that the open source software is subject to the terms and conditions of the applicable open source licenses, which are provided to you hereinbelow. License GNU GPL v2.0 Component
- Linux kernel 2.6
- busybox
- e2fsprogs
- gdbserver
- jfsutils
- mtd-utils
- procps
- u-boot
- udhcpc GNU LGPL v2.1 MPL 1.1
- directFB
- gconv
- glibc
- nanox OPEN SOURCE LICENSE 101 102 OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundations software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to sur-
render the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each authors protection and ours, we want to make certain that everyone understands that there is no war-
ranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyones free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term modification.) Each licensee is addressed as you. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents consti-
tute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of war-
ranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) E N E G N L G I S H E N E G N L G I S H These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alterna-
tive is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) OPEN SOURCE LICENSE 103 104 OPEN SOURCE LICENSE The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted inter-
faces, the original copyright holder who places the Program under this License may add an explicit geographical distribu-
tion limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which E N E G N L G I S H E N E G N L G I S H applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS GNU Lesser General Public License Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish);
that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to OPEN SOURCE LICENSE 105 106 OPEN SOURCE LICENSE surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work contain-
ing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term modification.) We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original authors reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax cri-
teria for linking other code with the library. E N E G N L G I S H E N E G N L G I S H We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a work based on the library and a work that uses the library. The former contains code derived from the library, whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copy-
right holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License
(also called this License). Each licensee is addressed as you. Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regard-
less of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the OPEN SOURCE LICENSE 107 108 OPEN SOURCE LICENSE Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium cus-
tomarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a work that uses the Library with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a work that uses the library. The executable is therefore cov-
ered by this License. Section 6 states terms for distribution of such executables. When a work that uses the Library uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially sig-
nificant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customers own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including what-
ever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/
E N E G N L G I S H E N E G N L G I S H or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not neces-
sarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the execut-
able. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will auto-
matically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your accep-
tance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
OPEN SOURCE LICENSE 109 110 OPEN SOURCE LICENSE END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found.
<one line to give the librarys name and an idea of what it does.> Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice Thats all there is to it!
E N E G N L G I S H E N E G N L G I S H ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to sat-
isfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted inter-
faces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of soft-
ware generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. OPEN SOURCE LICENSE 111 112 OPEN SOURCE LICENSE Mozilla Public License 1.1 (MPL 1.1) 1. Definitions. 1.0.1. Commercial Use means distribution or otherwise making the Covered Code available to a third party. 1.1. Contributor means each entity that creates or contributes to the creation of Modifications. 1.2. Contributor Version means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3. Covered Code means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case includ-
ing portions thereof. 1.4. Electronic Distribution Mechanism means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.5. Executable means Covered Code in any form other than Source Code. 1.6. Initial Developer means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A. 1.7. Larger Work means a work which combines Covered Code or portions thereof with code not governed by the terms of this License. E N E G N L G I S H E N E G N L G I S H 1.8. License means this document. 1.8.1. Licensable means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequent-
ly acquired, any and all of the rights conveyed herein. 1.9. Modifications means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is:
(a) Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
(b) Any new file that contains any part of the Original Code or previous Modifications. 1.10. Original Code means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License. 1.10.1. Patent Claims means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and appara-
tus claims, in any patent Licensable by grantor. 1.11. Source Code means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributors choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge. 1.12. You (or Your) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1.For legal entities, You includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, control means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity. 2. Source Code License. 2.1. The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellec-
tual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications, and/or as part of a Larger Work; and
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code;
2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the combination of the Original Code with other software or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-
exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, mod-
ify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combina-
tion of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifica-
tions of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor. OPEN SOURCE LICENSE 113 114 OPEN SOURCE LICENSE 3. Distribution Obligations. 3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5. 3.2. Availability of Source Code. Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party. 3.3. Description of Modifications. You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code. 3.4. Intellectual Property Matters
(a) Third Party Claims. If Contributor has knowledge that a license under a third partys intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled LEGAL which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained.
(b) Contributor APIs. If Contributors Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.
(c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributors Modifications are Contributors original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License. 3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer. E N E G N L G I S H E N E G N L G I S H 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipients rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer. 3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code. 4. Inability to Comply Due to Statute or Regulation. If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohib-
ited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. Versions of the License. 6.1. New Versions. Netscape Communications Corporation (Netscape) may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number. 6.2. Effect of New Versions. Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License. 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases Mozilla, MOZILLAPL, MOZPL, Netscape, MPL, NPL or any confusingly similar phrase do not appear in your license
(except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.) 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE OPEN SOURCE LICENSE 115 116 OPEN SOURCE LICENSE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive. 8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as Participant) alleging that:
(a) such Participants Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participants Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant. 8.3. If You assert a patent infringement claim against Participant alleging that such Participants Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the ini-
tiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resell-
ers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTYS NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The Covered Code is a commercial item, as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of com-
mercial computer software and commercial computer software documentation, as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS. This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial Developer may designate portions of the Covered Code as Multiple-Licensed. Multiple-Licensed means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A. EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License Version 1.1 (the License); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
E N E G N L G I S H E N E G N L G I S H Software distributed under the License is distributed on an AS IS basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. The Initial Developer of the Original Code is ________________________. Portions created by ______________________ are Copyright (C) ______ _______________________.All Rights Reserved. Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the [___] License), in which case the provisions of [______] License are applicable instead of those above.If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] License.
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]
OPEN SOURCE LICENSE 117 118 OPEN SOURCE LICENSE OpenSSL License Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
claimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.opens-
sl.org/) 4. The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment:
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl. org/) THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The fol-
lowing conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. E N E G N L G I S H E N E G N L G I S H 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) The word cryptographic can be left out if the rouines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
This product includes software written by Tim Hudson (tjh@cryptsoft.com) THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
MIT license
- libcurl Copyright (c) 1996 - 2010, Daniel Stenberg, <daniel@haxx.se>. All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
- ncurses Copyright (c) 1998 Free Software Foundation, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen-
tation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR HE USE OR OTHER DEALINGS IN THE SOFTWARE. OPEN SOURCE LICENSE 119 120 OPEN SOURCE LICENSE Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or other-
wise to promote the ale, use or other dealings in this Software without prior written authorization. thus encourage you to use the following text:
Portions of this software are copyright <year> The FreeType Project (www.freetype.org). All rights reserved. Please replace <year> with the value from the FreeType version you actually use. Expat license The source package was downloaded from <URL:http://expat.sourceforge.net>. The original packager is Adam Di Carlo <aph@debian.org>. The current maintainer is Ardo van Rangelrooij <ardo@debian.org>. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documenta-
tion files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. E N E G N L G I S H E N E G N L G I S H The FreeType Project LICENSE Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least. This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are that:
- We dont promise that this software works. However, we will be interested in any kind of bug reports. (`as is distribu-
tion)
- You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free usage)
- You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (`credits) We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial prod-
ucts. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project. Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We Legal Terms 0. Definitions Throughout this license, the terms `package, `FreeType Project and `FreeType archive refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project, be they named as alpha, beta or final release.
`You refers to the licensee, or person using the project, where `using is a generic term including compiling the projects source code as well as linking it to form a `program or `executable. This program is referred to as `a program using the FreeType engine. This license applies to all files distributed in the original FreeType Project, including all source code, binaries and docu-
mentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty THE FREETYPE PROJECT IS PROVIDED `AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT. 2. Redistribution This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, com-
pile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions:
- Redistribution of source code must retain this license file (`FTL.TXT) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, origi-
nal files must be preserved in all copies of source files.
- Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isnt mandatory. These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project,
`FreeType Engine, `FreeType library, or `FreeType Distribution. As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license. 4. Contacts There are two mailing lists related to FreeType:
freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you havent found anything to help you in the documentation. freetype-devel@nongnu.org OPEN SOURCE LICENSE 121 122 OPEN SOURCE LICENSE Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org JPEG license This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that this software is based in part on the work of the Independent JPEG Group.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable conse-
quences; the authors accept NO LIABILITY for damages of any kind. zlib/libpng License This product may contain open source software licensed under zlib/libpng License.
y Libmng : Copyright 2000-2008 Gerard Juyn (gerard@libmng.com)
y Libpng : Copyright (c) 1998-2008 Glenn Randers-Pehrson
(Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
(Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
y Md5 checksum : Copyright (C) 1999, 2000, 2002 Aladdin Enterprises.
y Zlib : Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler This software is provided as-is, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original soft-
ware. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler X.net license Copyright (c) 1995-2001 International Business Machines Corporation and others All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen tation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. BSD license
- strace Copyright (c) 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl>
Copyright (c) 1993 Branko Lankester <branko@hacktic.nl>
Copyright (c) 1993 Ulrich Pegelow <pegelow@moorea.uni-muenster.de>
Copyright (c) 1995, 1996 Michael Elizabeth Chastain <mec@duracef.shout.net>
Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com>
Copyright (C) 1998-2003 Wichert Akkerman <wakkerma@deephackmode.org>
Copyright (c) 2002-2008 Roland McGrath <roland@redhat.com>
Copyright (c) 2003-2008 Dmitry V. Levin <ldv@altlinux.org>
Copyright (c) 2007-2008 Jan Kratochvil <jan.kratochvil@redhat.com>
All rights reserved. E N E G N L G I S H E N E G N L G I S H Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
claimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote prod-
ucts derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- xyssl Copyright (C) 2006-2008 Christophe Devine Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org>
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
OPEN SOURCE LICENSE 123 claimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote prod-
ucts derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. RSA Data Security license Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved. License to copy and use this software is granted provided that it is identified as the RSA Data Security, Inc. MD5 Message-Digest Algorithm in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm in all material mentioning or referencing the derived work. RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided as is without express or implied warranty of any kind. These notices must be retained in any copies of any part of this documentation and/or software. E N E G N L G I S H The model and serial numbers of the TV is located on the back of the TV Record it below should you ever need service. MODEL SERIAL Regulatory Information cont. Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :
EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950-1
; Radio Frequency Interference
; Electromagnetic Immunity
; Power Line Harmonics
; Voltage Fluctuations
; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO'99 (TCO'99 applied model only) Congratulations!
You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 01 Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?
The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:
TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-
eating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict standards for disposal. TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**
Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one 02 Regulatory Information cont. exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________
* Bio-accumulative is defined as substances which accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO03 (TCO03 applied model only) Congratulations!
The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:
Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields 03 Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/about/environment/html/Recycling.jsp Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-
Hndler oder einen Unternehmensvertreter von LG. 04 Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp Franais Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :
http://www.lge.com/about/environment/html/Recycling.jsp Regulatory Information cont. Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/about/environment/html/Recycling.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/about/environment/html/Recycling.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar Regulatory Information cont. especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-
vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian 1994 LGE
' LG ',
. 05 06 Regulatory Information cont. K LGE
. LG.
http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) Regulatory Information cont. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne 2002/96/EC. 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-
ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques ventuels pour l'environnement et la sant humaine. 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce produit. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. 07 08 Regulatory Information cont. Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 2.Kaikki elektroniset laitteet ovat ongelmajtett, 1. joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten
, E O 2002/96/EOK. 2.H
. 3.H
. 4.
. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 09 Portuguese Hungarian Polish 10 Slovak Czech Croatian Regulatory Information cont. Estonian Latvian Lithuanian 11
This product uses the FCC Data API but is not endorsed or certified by the FCC