| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 02 2009 | Microsoft Word - User_s Manual_H_ok.doc EMC CENTER Acrobat Distiller 7.0.5 (Windows) |
| various | Users Manual | Users Manual | 2.87 MiB | / May 02 2009 |
Order Number Test Report Number
: GETEC-C1-08-161
: GETEC-E3-08-071 FCC Class B Certification APPENDIX H
: USERS MANUAL EUT Type: LCD TV/Monitor FCC ID.: BEJ37LH40UA LCD TV OWNERS MANUAL 32LH40 37LH40 42LH40 47LH40 55LH40 37LH55 42LH55 47LH55 55LH55 32CL40 42CL40 47CL40 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. This product qualifies for ENERGY STAR in the factory default (Home mode) setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to quality for Energy Star rating. P/NO : SAC33601903 (0812-REV00) www.lgusa.com / www.lg.ca WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-
ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER CAUTION This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product 2 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 2 Do not use this apparatus near water. Clean only with dry cloth. 7 Only use attachments/accessories specified by the manufacturer. 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus com-
bination to avoid injury from tip-over. 4 5 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 SAFETY INSTRUCTIONS Never touch this apparatus or antenna during a thunder or lighting storm. 15 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. CAUTION concerning the Power Cord:
It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 11 12 13 14 4 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). 17 18 19 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC out-
let). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. 20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis-
charge unit, connection to grounding elec-
trodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp Antenna Lead in Wire Electric Service Equipment NEC: National Electrical Code Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductor
(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) 21 22 Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. 23 24 25 26 27 Ventilation Install your TV where there is proper ventila-
tion. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight. For LCD TV If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary dis-
tortion effects on the screen. ON DISPOSAL
(Only Hg lamp used LCD TV) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 5 CONTENTS WARNING / CAUTION . 2 Channel Setup
- Auto Scan (Auto Tuning) . 48
- Add / Delete Channel (Manual Tuning) . 49
- Channel Editing . 50 Channel List . 51 Favorite Channel Setup / Favorite Channel List . 52 Brief Information . 53 Input List . 54 Input Label . 55 AV Mode . 56 Simple Manual . 56 Key Lock . 57 Simplink . 58 USB Entry Modes . 60 Photo List . 61 Music List . 65 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 68 Picture Wizard . 70 Preset Picture Settings (Sound Mode) . 72 Manual Picture Adjustment - User Mode . 73 Picture Improvement Technology . 74 Expert Picture Control . 75 Energy Saving . 78 Picture Reset . 79 Power Indicator . 80 Demo Mode . 81 SAFETY INSTRUCTIONS . 3 FEATURE OF THIS TV . 8 PREPARATION Accessories . 9 Front Panel Information . 10 Back Panel Information . 12 Stand Instruction . 14 VESA Wall Mounting . 18 Cable Management . 19 Desktop Pedestal Installation . 21 Swivel Stand . 21 Attaching the TV to a Desk . 22 Kensington Security System . 22 Securing the TV to the wall to prevent falling when the TV is used on a stand . 23 Antenna or Cable Connection . 24 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 25 DVD Setup . 28 VCR Setup . 30 Other A/V Source Setup . 32 PC Setup . 33 USB Connection . 40 Audio out Connection . 41 WATCHING TV / CHANNEL CONTROL Remote Control Functions . 42 Turning On TV . 44 Channel Selection . 44 Volume Adjustment . 44 Initial Setting . 45 On-Screen Menus Selection . 46 Quick Menu . 47 6 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 110 Maintenance . 112 Product Specifications . 113 IR Code . 115 External Control Through RS-232C . 116 Open Source License . 122 Auto Volume Leveler (Auto Volume) . 82 Clear Voice II . 83 Preset Sound Setting (Sound Mode) . 84 Sound Setting Adjustment - User Mode . 85 Balance . 86 TV Speakers On/Off Setup . 87 Audio Reset . 88 Stereo/SAP Broadcasts Setup . 89 Audio Language . 90 On-Screen Menus Language Selection . 91 Caption Mode
- Analog Broadcasting System Captions . 92
- Digital Broadcasting System Captions . 93
- Caption Option . 94 TIME SETTING Clock Setting
- Auto Clock Setup . 95
- Manual Clock Setup . 96 Auto On/Off Time Setting . 97 Sleep Timer Setting . 98 PARENTAL CONTROL / RATINGS Set Password & Lock System . 99 Channel Blocking . 102 Movie & TV Rating . 103 Downloadable Rating . 108 External Input Blocking . 109 7 FEATURE OF THIS TV HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing."
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode. Detailed calibration requires a licensed technician. Please contact your local dealer to inquire about an ISF certified technician. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. IMPORTANT INFORMATION TO PREVENT IMAGE BURN
/ BURN-IN ON YOUR TV SCREEN When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as image burn or burn-in. Image burn is not covered under the manufacturers warranty. In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma). Image burn can also occur on the letterboxed areas of your TV if you use the 4:3 aspect ratio setting for an extended period. 8 PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. T V S T B Q. M E N U P O W E R D V D V C R IN P U T M E N U E N T E R A V M O D E R E T U R N V O L F A V 1 MUTE 4 2 C H P A G E 7 5 3 8 6 0 9 FLASHBK 1.5V 1.5V Copyright 2007 LGE, All Rights Reserved. Owners Manual CD Manual Remote Control, Batteries Power Cord
(Except 47CL70)
(Except 47CL70) or x 4 Protection Cover Bolts for stand assembly
(Refer to P.14, 16) Screw for stand fixing
(Refer to P.22) This item is not included for all models.
* Wipe spots on the exterior only with the polishing cloth.
* Do not wipe roughly when removing stain. Excessive pressure may cause scratch or discoloration. Polishing Cloth Option Extras D-sub 15 pin Cable When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance. P R E P A R A T O N I 9 PREPARATION FRONT PANEL INFORMATION Image shown may differ from your TV. 32/37/42/47LH40, 37/42/47/55LH55 CHANNEL (D,E) Buttons VOLUME (D,E) Buttons ENTER Button MENU Button INPUT Button POWER Button CH VOL ENTER MENU INPUT ON OFF SPEAKER Remote Control Sensor, Intelligent Sensor Adjusts picture accord-
ing to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
(Can be adjusted Power Indicator in the OPTION menu. G p . 8 0) Power Switch
"As long as this TV is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this TV by SWITCH". P R E P A R A T O N I 10 32/42/47CL40 Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
(Can be adjusted using Power Indicator in the OPTION menu. G p.80) Remote Control Sensor POWER Button CH VOL ENTER MENU INPUT CHANNEL (
Buttons
) VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button P R E P A R A T O N I 11 PREPARATION BACK PANEL INFORMATION Image shown may differ from your TV. 9 32/37/42/47LH40, 32/42/47CL40 1 AV IN 1 VIDEO L
MONO
) AUDIO R 2 3 4
/DVI IN RGB IN (PC) 2 1 L R VIDEO COMPONENT IN AUDIO 7 37/42/47/55LH55 1 AV IN 1 VIDEO L
MONO
) AUDIO R 2 1 L R VIDEO COMPONENT IN AUDIO 3 2 1 3 2 1 AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN 6 5 2 3 4
/DVI IN RGB IN (PC) AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN 7 6 5 8 2 1 8 2 1 N I B S U 4 N I R I O D U A O N O M L
O E D V I AV IN 2 N I B S U 4 N I R I O D U A O N O M L
O E D V I AV IN 2 P R E P A R A T O N I 12 6 7 8 8 RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. This port is used for Service or Hotel mode. COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red and white for audio. USB INPUT Used for viewing photos and listening to MP3s. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 1 2 3 4 5 AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). HDMI/DVI IN Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable). AUDIO IN (RGB/DVI) 1/8 headphone jack for analog PC audio input. OPTICAL DIGITAL AUDIO OUT Digital audio output for use with amps and home theater systems. Includes an optical connection. Note: In standby mode, these ports do not work. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. P R E P A R A T O N I 13 PREPARATION STAND INSTRUCTION (For 32/42/47CL40) INSTALLATION (Only 32/42CL40) 1 Carefully place the TV screen side down on a cush-
ioned surface to protect the screen from damage. 2 Assemble the parts of the STAND BODY with COVER BASE of the TV. 3 Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV. NOTE
G When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installa-
tion). Do not over tighten. P R E P A R A T O N I 14 STAND BODY COVER BASE DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. P R E P A R A T O N I 15 PREPARATION STAND INSTRUCTION (For 32/37/42/47LH40, 37/42/47/55LH55) Image shown may differ from your TV. P R E P A R A T O N I INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.
NOTE G When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installa-
tion). Do not over tighten. 16 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. P R E P A R A T O N I 17 PREPARATION VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. AA BB VESA
(A * B) 200 * 100 200 * 200 600 * 400 Standard Screw Quantity M4 M6 M8 4 4 4 Model 32LH40, 32CL40 37LH40, 37LH55 42LH40, 42LH55, 42CL40 47LH40, 47LH55, 47CL40 55LH40, 55LH55
NOTE G Screw length needed depends on the wall mount used. For further information, refer to the instruc-
tions included with the mount. G Standard dimensions for wall mount kits are shown in the table. G When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. G Do not use screws longer then the standard dimen-
sion, as they may cause damage to the inside to the TV. G For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifica-
tions. G Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents. G LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installa-
tion instructions. CAUTION G Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock. P R E P A R A T O N I 18 CABLE MANAGEMENT For 32/42/47CL40 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. P R E P A R A T O N I 19 PREPARATION CABLE MANAGEMENT For 32/42/47/55LH40, 37/42/47/55LH55 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. P R E P A R A T O N I 20 CABLE MANAGEMENT CLIP DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. P R E P A R A T O N I 21 PREPARATION ATTACHING THE TV TO A DESK The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand Desk 1-Screw
(provided as parts of the product) WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. KENSINGTON SECURITY SYSTEM This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
- For the detailed installation and use of the Kensington Security System, refer to the users guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as note-
book PCs and LCD projectors. NOTE: The Kensington Security System is an optional accessory. P R E P A R A T O N I 22 SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE
G Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same. P R E P A R A T O N I 23 PREPARATION To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. P R E P A R A T O N I Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments
(Connect to wall antenna socket) ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the bronze wire when connecting the antenna. ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance. 24 EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-
top box to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L R 2 Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO 1 jacks on the TV. 1 2 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box. operation) Select the Component1 input source on the TV using the INPUT button on the remote control. If connected to COMPONENT IN 2 input, select the Component2 input source on the TV. Supported Resolutions Y, CB/PB, CR/PR AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO Signal 480i 480p 720p 1080i 1080p Component HDMI Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Yes Yes Yes Yes Yes No Yes Yes Yes Yes 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect 1 2 Connect the digital set-top box to HDMI/DVI IN 1, 2, 3, or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 1 L R AUDIO IN
(RGB/DVI) EO OMPONENT IN AUDIO RS-232C IN
(CONTROL&SERVICE) O A C 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control.
NOTE G Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3. 1 HDMI OUTPUT HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.939 60.00 E X T E R N A L E Q U I P M E N T S E T U P 26 DVI to HDMI Connection 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1, 2, 3, or 4 jack on the TV. Connect the digital set-top box audio output to the AUDIO (RGB/DVI) jack on the TV. 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control.
NOTE G A DVI to HDMI cable or adapter is required for this con-
nection. DVI doesn't support audio, so a separate audio connection is necessary. AV IN 1 L
MONO
) AUDIO R
/DVI IN RGB IN (PC) 3 2 1 1 L R AUDIO ENT IN AUDIO IN
(RGB/DVI) OPTICAL DIG AUDIO OU RS-232C IN
(CONTROL&SERVICE) ANTENNA CABLE IN 1 2 DVI OUTPUT L AUDIO R E X T E R N A L E Q U I P M E N T S E T U P 27 EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L R 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1 jacks on the TV. 1 2 2. How to use Turn on the DVD player, insert a DVD. Select the Component1 input source on the TV using the INPUT button on the remote control. If connected to COMPONENT IN 2 input, select the Component2 input source on the TV. Refer to the DVD player's manual for operating instructions. AV IN 1
/DVI VIDEO L
MONO
) AUDIO R 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L E Q U I P M E N T S E T U P 28 Composite (RCA) Connection 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) 2. How to use Turn on the DVD player, insert a DVD. Select the A V 1 or A V 2 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. HDMI Connection 1. How to connect 1 2 Connect the HDMI output of the DVD to the HDMI/DVI IN 1, 2, 3 or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions.
NOTE G Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3. AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO 1 2 VIDEO L R AUDIO AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 1 L R O MPONENT IN AUDIO AUDIO IN
(RGB/DVI) RS-232C IN
(CONTROL&SERVICE) OP A AN C 1 HDMI OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Antenna Connection 1. How to connect 1 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock-
et on the TV. UDIO IN RGB/DVI) RGB IN (PC) OPTICAL DIGITAL AUDIO OUT 1 RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN ANT OUT S-VIDEO VIDEO L R AUDIO 2 Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) ANT IN OUTPUT SWITCH Wall Jack 2 Antenna E X T E R N A L E Q U I P M E N T S E T U P 30 Composite (RCA) Connection 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) 2. How to use Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) Select the A V 1 input source on the TV using the INPUT button on the remote control. If connected to AV IN 2, select AV2 input source on the TV. AV IN 1
/DVI VIDEO L
MONO
) AUDIO R 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO 1 NOTE
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. ANT IN S-VIDEO VIDEO L R AUDIO ANT OUT OUTPUT SWITCH E X T E R N A L E Q U I P M E N T S E T U P 31 Camcorder Video Game Set VIDEO L R N I B S U 4 N I 1 R I O D U A O N O M L
O E D V I AV IN 2 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use Select the A V 2 input source on the TV using the INPUT button on the remote control. If connected to AV IN 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. E X T E R N A L E Q U I P M E N T S E T U P 32 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect 1 2 Connect the VGA output of the PC to the RGB IN
(P C) jack on the TV. Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV. R 3 2 1
/DVI IN RGB IN (PC) AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN 2. How to use 1 2 Turn on the PC and the TV. Select the RGB-PC input source on the TV using the INPUT button on the remote control. AUDIO RGB OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 33 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect 1 2 Connect the DVI output of the PC to the HDMI/DVI IN 1, 2, 3, or 4 jack on the TV. AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV. 3 2 1 L R O MPONENT IN AUDIO AUDIO IN
(RGB/DVI) RS-232C IN
(CONTROL&SERVICE) OP A A C 2. How to use Turn on the PC and the TV. Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control.
NOTE G Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3. 1 2 DVI OUTPUT AUDIO
NOTES G To get the the best picture quality, adjust the PC G The synchronization input form for Horizontal and graphics card to 1920x1080. Vertical frequencies is separate. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-
ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. G Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. G Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. G If there are overscan in HDMI-PC 1920x1080, change aspect ratio to Just scan. G The TV provides EDID data to the PC system with a DDC protocol. DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. E X T E R N A L E Q U I P M E N T S E T U P 34 Supported Display Specifications (RGB-PC, HDMI-PC) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 70.09 70.08 59.94 56.25 60.31 60.00 70.06 59.87 60.02 60.015 60.00 31.469 31.469 35.156 37.879 48.363 56.476 47.776 63.981 47.712 75.00 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 59.934 67.5 60.00 E X T E R N A L E Q U I P M E N T S E T U P 35 EXTERNAL EQUIPMENT SETUP USB CONNECTION or 1 Memory Key N I B S U 4 N I I R O D U A O N O M L
O E D V I AV IN 2 1. How to connect 1 Connect the USB device to the USB I N jack on the side of TV. 2. How to use After connecting the USB I N jack, you use the USB func-
tion. (G p.60) E X T E R N A L E Q U I P M E N T S E T U P 40 AUDIO OUT CONNECTION Send the TVs audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1. How to connect 1 2 3 Connect one end of the optical or coaxial cable to the TV port of OPTICAL DIGITAL AUDIO OUT. Connect the other end of the optical cable to the digital audio input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (G p.87). See the external audio equipment instruction manu-
al for operation.
NOTE G When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (G p . 8 7) CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision. G Block the SPDIF out (optical) about the contents with ACP (Audio Copy Protection) function.
/DVI IN RGB IN (PC) AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT 1 ANTENNA/
CABLE IN RS-232C IN
(CONTROL&SERVICE) 2 E X T E R N A L E Q U I P M E N T S E T U P 41 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. RATIO Change the aspect ratio. G p.68 SLEEP Select the amount of time before your TV turns off auto-
matically. G p.98 RATIO POWER SLEEP Q. MENU MENU INPUT ENERGY SAVING POWER Turns your TV on or off. INPUT Rotates through inputs. Also switches the TV on from standby. G p.54 ENTER ENERGY SAVING Adjusts the Energy Saving. G p.78 Q.MENU Opens the list of Quick Menu options. G p.47 RETURN INFO AV MODE MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. G p.58-59 NUMBER button
(DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. LIST Displays the channle table. G p.51 FLASHBK Tunes to the last channel viewed. VCR, USB, SIMPLINK Control buttons Controls video cassette recorders or DVD players. Controls USB menu (PHOTO LIST and MUSIC LIST.) Controls the SIMPLINK compatible devices. MARK FAV MUTE 2 5 8 0 CH P A G E 3 6 9 FLASHBK VOL 1 4 7 LIST W A T C H I N G T V
C H A N N E L C O N T R O L 42 THUMBSTICK
(Up/Down/Left Right/ENTER) Navigates the on-screen menus and adjusts the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. INFO Displays channel information at the top of the screen. G p.53 AV MODE Toggles through preset Video and Audio modes. G p.56 VOLUME UP
/DOWN Increase/decrease the sound level. FAV Scroll through the programmed Favorite channels. G p.52 MARK Select the input to apply the Picture Wizard settings. G p.71 Use to mark or unmark a photo/music G p.62, 66 MUTE Switchs the sound on or off. G p.44 CHANNEL UP/DOWN PAGE UP/DOWN Changes the channel. Moves from one full set of screen information to the next one. Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity. Install two 1.5V AAA batteries. Dont mix old or used bat-
teries with new ones. Close cover. W A T C H I N G T V
C H A N N E L C O N T R O L 43 WATCHING TV / CHANNEL CONTROL TURNING ON THE TV 1 2 3 First, connect power cord correctly and switch the main power on TV front. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the
, INPUT, CH (D E or
) button on the TV or press the POWER, INPUT, TV, CH(
or
), Number (0~9) button on the remote control. Select the viewing source by using the INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
NOTE G If you intend to be away on vacation, disconnect the power plug from the wall power outlet. G If you do not complete the Initial setting, it will appear whenever the TV is switched on until the Initial setting procedure is completed. G If this TV is unplugged once or turn off with the power switch on the TV, reset the Time function. CHANNEL SELECTION 1 Press the CH (
or
) or NUMBER buttons to select a channel number. W A T C H I N G T V
C H A N N E L C O N T R O L VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. Press the VOL (+ or -) button to adjust the volume. If you want to switch the sound off, press the MUTE button. You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button. 1 2 3 44 USB ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the USB IN jacks on the side of TV. N I B S U U S B 2 4 N I Memory Key Select Photo List or Music L i s t. It doesnt support USB HDD This TV supports JPG and MP3 files. When removing the USB device Select the USB Device menu before removing the USB device. 1Q. MENU Select USB Device. Photo List Music List 3 ENTER 2 ENTER Select Eject. Precautions when using the USB device G Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recogni-
tion program may not be recognized. G A USB storage device which uses its own driver may not be recognized. G USB multi-card reader or USB hard drive may not operate smoothly or may not operate at all. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. G Only use a USB storage device which has normal music files or image files. G Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility pro-
gram which is not supported by Windows, it may not be recognized. G Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. G Some USB storage devices may not be supported or operate properly. G Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the man-
ufacturer does not cover data damage. 60 USB Photo Selection and Popup Menu Photo List Drive1 JMJ001 1366x768, 125KB Up Folder Page 2/3 No Marked Up Folder KY101 KY102 JMJ001 JMJ002 JMJ003 JMJ004 06/10/2008 04/03/2008 01/01/2000 06/15/2008 04/03/2008 02/18/2008 USB Device Free Space 150MB KY103 KY104 KY105 JMJ005 JMJ006 JMJ007 JMJ008 03/30/2008 06/19/2008 01/31/2008 05/13/2008 05/26/2008 02/18/2008 02/18/2008 Navigation Popup Menu CH Page Change MARK Mark Exit Photo List Drive1 JMJ001 1366x768, 125KB Up Folder Page 2/3 No Marked Up Folder KY101 KY102 JMJ001 JMJ002 JMJ003 JMJ004 06/10/2008 04/03/2008 01/01/2000 06/15/2008 04/03/2008 02/18/2008 USB Device Free Space 150MB KY103 03/30/2008 1366x768, 125KB 06/19/2008 KY104 View KY105 Mark All JMJ005 Delete JMJ006 Close JMJ007 01/31/2008 05/13/2008 05/26/2008 02/18/2008 JMJ008 02/18/2008 Navigation Popup Menu CH Page Change MARK Mark Exit When you select a file (not folder), this PopUp menu is displayed. G View: Display the selected item. G Mark All: Mark all photos on the screen. G Unmark All: Deselect all marked photos. G Delete: Delete the selected photo item. G Close: Close the pop-up menu. 1 2 3 4 Select the target folder or drive. ENTER Select the desired photos. ENTER Show the Popup menu. ENTER Select the desired Popup menu. Use the C H photo page. button to navigation in the Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all pho-
tos in the folder in a slide show. U S B 62 USB 6 ENTER Select the Sideshow, BGM, Delete, Option, or Hide.
(Rotate), Use button to select the previous or next photo. Use button to select and control the menu on the full-sized screen. 1/17 Sideshow BGM Delete Option Hide U S B G Slide Show: Selected photos are displayed during the slide show. If no photo is selected, all photos in the cur-
rent folder are displayed during slide show. Set the time interval of the slide show in Option. G B G M: Listen to music while viewing photos in full size. Set the BGM device and album in Option. G
(Rotate): Rotate photos. Rotates the photo 90, 180, 270, 360 clockwise. G Delete: Delete photos. G Option: Set values for Slide Speed and Music Press F G to set the time interval between slides. Slide Speed Music Album Fast
... Enter Cancel Album. Use Then go to tings. button and ENTER button to set values. and press ENTER to save the set-
You cannot change Music Album while BGM is playing. G Hide : Hide the menu on the full-sized screen. To see the menu again on the full-sized screen, press ENTER button to display. NOTE
G This TV will not be able to decode most JPG images saved using the Progressive option. 64 USB Music Selection and Popup Menu Up to 6 music titles are listed per page. Music List Drive1 Arirang Page 1/1 No Marked Title USB Device Free Space 150MB Duration Arirang Good Bye 04:12 05:30 A 00:00 / 04:16 Up Folder U S B Navigation Popup Menu CH Page Change MARK Mark Exit G Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current fold-
er will be played. If you go to a different folder and press the ENTER button, the current music in playback will stop. G Play Marked: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. G Stop Play (During playback): Stop the play-
ing musics. Music List Drive1 Arirang A 00:00 / 04:16 Up Folder Page 1/1 No Marked USB Device Free Space 150MB Title Duration G Play with Photo: Start playing the selected musics and then move to the Photo List. Up Folder Arirang Good Bye 3945 KB 128 Kbps Play Play with Photo Mark All Delete Cancel G Mark All: Mark all musics in the folder. G Unmark All: Deselect all marked music. G Delete: Delete the selected music. G Close: Close the pop-up menu. Navigation Popup Menu CH Page Change MARK Mark Exit 1 2 3 4 Select the target folder or drive. ENTER Select the desired musics. ENTER Show the Popup menu. ENTER Select the desired Popup menu. 5RETURN Return to TV viewing Use the C H button to navigation in the music page. Use MARK button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play. 66 The play information box (as shown below) will automatically move across the screen when there is no user input to pre-
vent a fixed image remaining on the screen for a extended period of time.
NOTE is displayed in front of the music play time. G When music is playing, G A damaged or corrupted music file that does not play displays 00:00 as the play time. G Music files with copy-protection will not play. G Press ENTER, A , or RETURN button to stop the screen saver. G This TV can not play music files less than 16 Kbytes. U S B 67 16:9 Adjust the picture horizontally, in a linear pro-
portion to fill the entire screen. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. Just Scan operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV
(720p/1080i/1080p) input source. Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. When adjusting in Q.MENU menu, a. F or G button: Adjust enlarge proportion of Zoom. b. D or E button: Move the screen. Set by program Selects the proper picture proportion to match the sources image.
(4:3 4:3)
(16:9 16:9) Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted. F or G button: Adjust enlarge proportion of Cinema Zoom. The adjustment range is 1-16. D or E button: Move the screen. P I C T U R E C O N T R O L 69 PICTURE CONTROL Color Temperature Dynamic Contrast Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. Adjusts the contrast to keep it at the best level according to the brightness of the screen. The resolution of gradation is improved by making bright parts brighter and dark parts darker. This feature refers to dynamic contrast, and enhances the feeling of presence that contrast controls are intended to give by using dimming and other input signals. Dynamic Color Noise Reduction Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Reduces screen noise without compromising video quality. This feature is also used to reduce recursive noise. Gamma Set the gradient curve according to the relationship between input and output of the video signal. Calibrate the linear characteristics of the gradient curve between input signal voltage to output. You can adjust brightness of dark area and middle gray level area of the picture. Low : Make dark and middle gray level area of the picture brighten. Medium: Express original picture gradation. High: Make dark and middle gray level area of the picture darken. Black Level Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter. Auto: Realizing the black level of the screen and set it to High or Low automatically. Makes dark parts on the screen look darker. This feature is disable in DTV and RGB-PC mode. Adjust the brightness of the screen to prevent the screen from being too bright. Eye Care Dims extremely bright pictures. This feature is disable in Picture Mode-Vivid, Cinema. Makes video clips recorded in film look more natural. When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), Real Cinema the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV, Component 480i/1080i, and HDMI 1080i mode. Color Gamut Standard: Mode to realize original color irrelevant from the display characteristics of the color space according to the standard of input signal. Wide: Mode to use and set the rich color area of the display. Maximize the utilization for color area that can be expressed. This feature is disabled in Picture Mode-Vivid, Sport. Edge Enhancer Show clearer and distinctive yet natural corners of the video. Emphasizes the frames of the video without over peaking. P I C T U R E C O N T R O L 76 TruMotion 120Hz/240Hz TruMotion120Hz provides even better quality for movies than 3:2 Pull-Down con-
versions. TruMotion120Hz means the panel supports faster frame rates that normal panels which makes for smoother motion in video. TruMotion LCD models support 120Hz instead of 60Hz. This means twice the information on the screen in the same amount of time and easier film conversions (120 is equally divisible by 24, so no interpretations or double frames are needed). TruMotion120Hz works with all inputs except PC mode. If you enable "TruMotion 100HZ", noise may appear on the screen. If this occurs, set "TruMotion 100HZ" to "Off". Color Standard
(BT-601) and HD video (BT-709) color format. Convert the color of a different video to HD color. This function is set for SD video Color Filter This is the function to filter only the specific color area of the video by adjusting the RGB LUT of the output terminal. You can use the RGB filter to accurately set the color concentration and color xvYCC This is the function to express richer color. Expert Pattern This is the pattern necessary for expert adjustment. White Balance Color Management This is the function to adjust the overall color of the screen to the feeling you want. a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50. b. Method : 10 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue accord-
ing to each setting.
- Luminance: Automatically adjusted depending on IRE value.
- Red/Green/Blue: The adjustment range is -50 - +50. As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas
(Red/Green/Blue/Cyan/Mgt/Yellow). Color difference may not be distinctive even when you make the adjustments for the general video. Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -50 - +50.
- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -50 - +50.
- This feature is disable in RGB-PC and HDMI (PC) mode. OPC
*This feature is not available for all models. As the technology to reduce the power consumption while keeping the same bright-
ness, this has the effect of reducing power consumption, improvement in contrast and light source etc. P I C T U R E C O N T R O L 77 PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Ch. Change Navigation CH Page Change Previous Block/Unblock LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU ENTER Select L O C K. 3 6 9 2 5 8 0 Input the password. Select Block Channel. ENTER Select a channel to block or unblock. 2 1 4 7 3 4 5 Block or unblock a channel. 6 MENU RETURN Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 102 TV Rating General - For USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Dialogue Language Sex Violence Close LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select L O C K. Input the password. Select TV Rating-General. Select A g e, Dialogue, Language, S e x or Violence. Select block options. Return to the previous menu. Return to TV viewing. Age (applies to TV-G,TV-PG,TV-14,TV-
MA). Dialogue-sexual dialogue (applies to TV-PG,TV-14). Language-adult language (applies to TV-PG, TV-14, TV-MA). Sex-sexual situations (applies to TV-PG, TV-14, TV-MA). Violence (applies to TV-PG, TV-14, TV-
MA). 1 MENU 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5 ENTER 6RETURN MENU P A R E N T A L C O N T R O L
R A T I N G 105 APPENDIX TROUBLESHOOTING The TV does not turn on. The remote control doesnt work Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Ensure that the correct remote operating mode is set: TV, VCR etc. Install new batteries. Power is suddenly turned off Is the sleep timer set?
Check the power control settings. Power interrupted. The video does not work. No picture &No sound Check whether the product is turned on. Try another channel. The problem may be with the broadcast. Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location. Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. A P P E N D I X No or poor color or poor picture Horizontal/vertical bars or picture shaking Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. Try another channel. The problem may be with the broadcast. Are the video cables installed properly?
Activate any function to restore the brightness of the picture. Check for local interference such as an electrical appliance or power tool. Poor reception on some channels Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. Check for sources of possible interference. Lines or streaks in pictures No picture when connecting HDMI Check antenna (Change the direction of the antenna). Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. 110 The audio does not work. Picture OK & No sound Press the VOL or VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly?
No output from one of the speakers Adjust Balance in menu option. Unusual sound from inside the product A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. No sound when connecting HDMI/USB Check HDMI cable over version 1.3. Check USB cable over version 2.0. Use normal MP3 file.
*This feature is not available for all models. There is a problem in PC mode. (Only PC mode applied) The signal is out of range Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. Vertical bar or stripe on background &
Horizontal Noise &
Incorrect position Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color Check the signal cable. Reinstall the PC video card. A P P E N D I X 111 MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence CAUTION G If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 112 PRODUCT SPECIFICATIONS Dimensions
(Width x Height x Depth) MODELS With stand 32LH40
(32LH40-UA) 37LH40
(37LH40-UA) 42LH40
(42LH40-UA) 31.6 x 23.0 x 8.8 inches 804.4 x 586.3 x 223.8 mm 36.6x 27.8 x 14.8 inches 929 x 706.9x 374.7mm 40.7 x 23.8 x 11.6 inches 1036.0 x 721.3 x 296.2 mm Without stand 31.6 x 20.8 x 3.1 inches 804.4 x 529.2 x 81.0 mm 36.6x 26.1 x 3.9 inches 929 x 665x 98.7mm 40.7 x 25.8 x 3.5 inches 1036.0 x 655.4 x 89.8 mm Weight With stand Without stand 26.8 pounds / 12.2 kg 24.0 pounds / 10.9 kg 46.3 pounds / 21.2 kg 39.9 pounds / 18.1 kg 40.3 pounds / 18.3 kg 36.3 pounds / 16.5 kg Dimensions
(Width x Height x Depth) MODELS With stand 47LH40
(47LH40-UA) 55LH40
(55LH40-UA) 1156.2 x 813.1 x 342.9 mm 45.6 x 32.0 x 13.5 inches 63.4 x 37.1 x 12.5 inches 1612.0 x 944.2 x 320.0 mm Without stand 1156.2 x 739.2 x 103.0 mm 45.6 x 29.1 x 4.1 inches 63.4 x 34.5 x 5.6 inches 1612.0 x 878.0 x 143.0 mm Weight With stand Without stand 64.4 pounds / 29.2 kg 54.3 pounds / 24.6 kg 160.7 pounds / 72.9 kg 130.9 pounds / 59.4 kg Dimensions
(Width x Height x Depth) MODELS With stand 32CL40
(32CL40-UA) 42CL40
(42CL40-UA) 47CL40
(47CL40-UA) 32.0 x 23.5 x 91. inches 813.8 x 598.8 x 231.9 mm 40.7 x 28.9 x 11.5 inches 1034.0 x 735.0 x 294.0 mm 45.5 x 32.0 x 13.5 inches 1156.2 x 813.1 x 342.9 mm Without stand 32.0 x 21.2 x 3.1 inches 813.8 x 540.4 x 78.9 mm 40.7 x 26.1 x 3.5 inches 1034.0 x 663.0 x 91.0 mm 45.5 x 29.1 x 4.0 inches 1156.2 x 739.2 x 103.0 mm Weight With stand Without stand 28.4 pounds / 12.9 kg 25.1 pounds / 11.4 kg 54.0 pounds / 24.5 kg 48.5 pounds / 22.0 kg 64.3 pounds / 29.2 kg 54.2 pounds / 24.6 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 113 APPENDIX Dimensions
(Width x Height x Depth) MODELS With stand 37LH55
(37LH55-UA) 42LH55
(42LH55-UA) 36.6x 27.8 x 14.8 inches 929 x 706.9x 374.7mm 41.5x 28.3 x 11.7 inches 1052.2 x 719.1 x 296.2mm Without stand 36.6x 26.1 x 3.9 inches 929 x 665x 98.7mm 41.5 x 25.9 x 3.6 inches 1052.2 x 657.4 x 90.8mm Weight With stand Without stand 46.3 pound / 21.2 kg 39.9 pound / 18.1 kg 40.4 pound / 18.3 kg 36.4 pound / 16.5 kg Dimensions
(Width x Height x Depth) MODELS With stand 47LH55
(47LH55-UA) 55LH55
(55LH55-UA) 45.6 x 32.0 x 13.5 inches 1156.2 x 813.1 x 342.9 mm 63.4 x 37.1 x 12.5 inches 1612.0 x 944.2 x 320.0 mm Without stand 45.6 x 29.1 x 4.1 inches 1156.2 x 739.2 x 103.0 mm 63.4 x 34.5 x 5.6 inches 1612.0 x 878.0 x 143.0 mm Weight With stand Without stand 64.4 pounds / 29.2 kg 54.3 pounds / 24.6 kg 160.7 pounds / 72.9 kg 130.9 pounds / 59.4 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity 32CL40
(32CL40-UA) AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM 32CL40
(32CL40-UA) VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 114 IR CODES Code
(Hexa) Function Note Code
(Hexa) Function Note 08 45 43 0B POWER Q.MENU MENU INPUT Remote control Button (Power On/Off) D6 TV Discrete IR Code Remote control Button
(TV Input Selection) Remote control Button C4 POWER ON Discrete IR Code Remote control Button
(Only Power On) 10-19 Number Key 0-9 Remote control Button C5 POWER OFF Discrete IR Code 4C 1A 09 02 03 00 01 1E 40 41 07 06 44 28 7E 30 B0 BA B1 BD 8F 8E
- (Dash) FLASHBK MUTE VOL +
VOL -
CH CH FAV ENTER RETURN SIMPLINK AV MODE PLAY PAUSE STOP REC REW FF Remote control Button Remote control Button 5A AV1 Remote control Button
(Only Power Off) Discrete IR Code
(AV1 Input Selection) Remote control Button D0 AV2 Discrete IR Code Remote control Button
(AV2 Input Selection) Remote control Button BF COMPONENT1 Discrete IR Code Remote control Button
(Component1 Input Selection) Remote control Button D4 COMPONENT2 Discrete IR Code Remote control Button
(Component2 Input Selection) Remote control Button D5 RGB-PC Discrete IR Code Remote control Button
(RGB-PC Input Selection) Remote control Button CE HDMI1 Discrete IR Code Remote control Button
(HDMI1 Input Selection) Remote control Button CC HDMI2 Discrete IR Code Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button E9 DA 76 77 AF
(HDMI2 Input Selection) HDMI3 Discrete IR Code
(HDMI3 Input Selection) HDMI4 Discrete IR Code
(HDMI4 Input Selection) Ratio 4:3 Discrete IR Code
(Only 4:3 Mode) Ratio 16:9 Discrete IR Code
(Only 16:9 Mode) Ratio Zoom Discrete IR Code
(Only Zoom1 Mode) A P P E N D I X 115 APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.e) AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 L R VIDEO COMPONENT IN AUDIO AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN PC Type of Connector; D-Sub 9-Pin Male Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable.
NOTE G This product has command echo back in the RS-232C Command. No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 A P P E N D I X 116 RS-232C Configurations Either cable below can be used. 7-Wire Configuration
(Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations
(Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping. OPTION Move Enter OPTION Move Enter Menu Language Audio Language Input Label SIMPLINK Key Lock Simple Manual Caption Set ID
: English
: English
: On
: Off
: Off
: 1 E Select OPTION. Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 ENTER ENTER 4RETURN MENU Menu Language Audio Language Input Label SIMPLINK Key Lock Simple Manual Caption Set ID E
: English
: English
: On
: Off
: Off
: 1 F 1 G Close Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 A P P E N D I X 117 01. Power (Command: k a) 06. Volume Control (Command: k f) To control Power On/Off of the TV. To adjust volume. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Input Select (Command: x b) To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV/AV1 Data 21: AV2 Data 40: Component/ Component1 Data 41: Component 2 Data 60: RGB-PC Data 91: HDMI2 Data 90: HDMI/HDMI1 Data 92: HDMI3 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
* Data21, 41, 91, 92 : Except 22LH20DC You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
03. Aspect Ratio (Command: k c) To adjust the screen format. 09. Color (Command: k i) To adjust screen color. Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 06: Set by program 02: 16:9 04: Zoom 1 05: Zoom 2 08: Full (Only 22LH2DC) 09: Just scan Reserved Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on) Data 01: Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j) To adjust screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 119 18. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
19. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data 01 & 02: Major Channel Number Data 01: High byte Data 02: Low byte Two bytes are available for the Major and Minor, nor-
mally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. APPENDIX 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 14. Treble (Command: k r) To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping as shown. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s) To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping as shown. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping as shown. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command: k u) To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 120 Data5:
7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved
... Reserved 20. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
21. Key (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]
See page 115. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
22. Backlight (Command: m g) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
The table above lists the binary code which must be converted to Hexadecimal before sending. For example:
The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.
* 7th bit : For which source do you want to change the channel.
* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.
* 5th bit: Use 0 with NTSC since it can only use the phys-
ical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]
[Data02][Data03][Data04][x][a][ ][Set ID]
[ ][NG][Data00][x]
A P P E N D I X 121 APPENDIX OPEN SOURCE LICENSE - This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other free software foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the soft-
ware, and (2) offer you this license which gives you legal permis-
sion to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make cer-
tain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license applies to any program or other work which con-
tains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a
"work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work con-
taining the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running the Program is not restricted, and the out-
put from the program is covered only if its contents constitute a work based on the program (independent of having been made by running the program). Whether that is true depends on what the program does. 1. You may copy and distribute verbatim copies of the program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and give any other recipients of the program a copy of this license along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. A P P E N D I X 122 b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license. c) If the modified program normally reads commands interac-
tively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this license.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the dis-
tribution of the whole must be on the terms of this license, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con-
test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the program. In addition, mere aggregation of another work not based on the program with the Program (or with a work based on the program) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. 3. You may copy and distribute the program (or a work based on it, under section 2) in object code or executable form under the terms of sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alter-
native is allowed only for noncommercial distribution and only if you received the program in object code or exe-
cutable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all mod-
ules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offer-
ing access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licens-
es terminated so long as such parties remain in full compli-
ance. 5. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the program
(or any work based on the program), you indicate your accep-
tance of this license to do so, and all its terms and conditions for copying, distributing or modifying the program or works based on it. 6. Each time you redistribute the program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforc-
ing compliance by third parties to this license. A P P E N D I X 123 APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this license, they do not excuse you from the con-
ditions of this license. If you cannot distribute so as to satis-
fy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the program at all. For example, if a patent license would not permit royalty-free redistribution of the program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution sys-
tem, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 8. If the distribution and/or use of the program is restricted in certain countries either by patents or by copyrighted inter-
faces, the original copyright holder who places the program under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present ver-
sion, but may differ in detail to address new problems or con-
cerns. Each version is given a distinguishing version number. If the program specifies a version number of this license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of A P P E N D I X 124 any later version published by the Free Software Foundation. If the program does not specify a version number of this license, you may choose any version ever published by the Free Software Foundation. 10.If you wish to incorporate parts of the program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copy-
righted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of pro-
moting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRO-
GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the great-
est possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effective-
ly convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and a brief idea of what it does. Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the license, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details. The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w and show c; they could even be mouse-clicks or menu items-whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the pro-
gram, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the pro-
gram Gnomovision (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subrou-
tine library, you may consider it more useful to permit linking pro-
prietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this license. A P P E N D I X 125 APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, ver-
sion 2, hence the version number 2.1.]
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think careful-
ly about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free soft-
ware (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is mod-
ified by someone else and passed on, the recipients should know that what they have is not the original version, so that the origi-
nal author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company can-
not effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to per-
mit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software devel-
opers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license pro-
vides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. A P P E N D I X 126 Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license agreement applies to any software library or other program which contains a notice placed by the copyright hold-
er or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this license). Each license is addressed as "you". A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it con-
tains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running a program using the Library is not restrict-
ed, and output from such a program is covered only if its con-
tents constitute a work based on the library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the library does and what the program that uses the library does. 1. You may copy and distribute verbatim copies of the library's complete source code as you receive it, in any medium, pro-
vided that you conspicuously and appropriately publish on You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this license. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any appli-
cation-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the library, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the library, the dis-
tribution of the whole must be on the terms of this license, whose permissions for other licenses extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con-
test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the library. In addition, mere aggregation of another work not based on the library with the library (or with a work based on the library) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. A P P E N D I X 127 APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the library into a program that is not a library. 4. You may copy and distribute the library (or a portion or deriv-
ative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this license. However, linking a work that uses the library with the Library creates an executable that is a derivative of the Library
(because it contains portions of the library), rather than a work that uses the library. The executable is therefore cov-
ered by this license. Section 6 states terms for distribution of such executable. When a work that uses the library uses material from a head-
er file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if the work can be linked without the library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessories, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legal-
ly a derivative work. (Executable containing this object code plus portions of the library will still fall under Section 6.) Otherwise, if the work is a derivative of the library, you may distribute the object code for the work under the terms of Section 6. Any executable containing that work also fall under Section 6, whether or not they are linked directly with the library itself. 6. As an exception to the sections above, you may also combine or link a "work that uses the library" with the library to pro-
duce a work containing portions of the library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the library is used in it and that the Library and its use are covered by this license. You must supply a copy of this license. If the work during execution displays copyright notices, you must include the copyright notice for the library among them, as well as a reference directing the user to the copy of this license. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/or source code, so that the user can modify the library and then relink to produce a modified executable containing the modified library. (It is understood that the user who changes the contents of definitions files in the library will not necessarily be able to recompile the appli-
cation to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the exe-
cutable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. A P P E N D I X 128 For an executable, the required form of the "work that uses the library" must include any data and utility programs need-
ed for reproducing the executable from it. However, as a spe-
cial exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the exe-
cutable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normal-
ly accompany the operating system. Such a contradiction means you cannot use both them and the library together in an executable that you distribute. 7. You may place library facilities that are a work based on the library side-by-side in a single library together with other library facilities not covered by this license, and distribute such a combined library, provided that the separate distribu-
tion of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the library except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the library is void, and will automatically termi-
nate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to mod-
ify or distribute the library or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the library (or any work based on the library), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distributing or modifying the library or works based on it. 10.Each time you redistribute the library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or mod-
ify the library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this license. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this license, they do not excuse you from the con-
ditions of this license. If you cannot distribute so as to satis-
fy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the library at all. For example, if a patent license would not permit royalty-free redistribution of the library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution sys-
tem which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a license cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 12.If the distribution and/or use of the library is restricted in cer-
tain countries either by patents or by copyrighted interfaces, the original copyright holder who places the library under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the library specifies a version number of this license which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. A P P E N D I X 129 To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. one line to give the library's name and a brief idea of what it does. Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the license, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make excep-
tions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new libraries If you develop a new library, and you want it to be of the great-
est possible use to the public, we recommend making it free soft-
ware that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). A P P E N D I X 130 MOZILLA PUBLIC LICENSE Version 1.1
1.Definitions. 1.0.1. Commercial use means distribution or otherwise making the covered code available to a third party. 1.1. Contributor means each entity that creates or con-
tributes to the creation of modifications. 1.2. 1.3. 1.4. Contributor version means the combination of the orig-
inal code, prior modifications used by a contributor, and the modifications made by that particular contributor. Covered code means the original code or modifications or the combination of the original code and modifications, in each case including portions thereof. Electronic distribution mechanism means a mechanism generally accepted in the software development communi-
ty for the electronic transfer of data. 1.5. Executable means covered code in any form other than source code. 1.6. 1.7. Initial developer means the individual or entity identified as the initial Developer in the Source Code notice required by exhibit A. Larger work means a work which combines covered code or portions thereof with code not governed by the terms of this License. 1.8. License means this document. 1.8.1. Licensable means having the right to grant, to the maxi-
mum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.9. Modifications means any addition to or deletion from the substance or structure of either the original code or any previous modifications. When covered code is released as a series of files, a modification is:
A. Any addition to or deletion from the contents of a file containing original code or previous modifications. B. Any new file that contains any part of the original code or previous modifications. 1.10. Original code means source code of computer software code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.10.1.Patent claims means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent licensable by grantor. 1.11. Source code means the preferred form of the covered code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable, or source code differential comparisons against either the original code or another well known, available covered code of the contributor's choice. The source code can be in a compressed or archival form, pro-
vided the appropriate decompression or de-archiving soft-
ware is widely available for no charge. 1.12. You (or Your) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this license or a future version of this license issued under section 6.1. For legal entities, You includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, control means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) own-
ership of more than fifty percent (50%) of the outstand-
ing shares or beneficial ownership of such entity. 2. Source Code License. 2.1. The initial developer grant. The initial developer hereby grants You a world-wide, roy-
alty-free, non-exclusive license, subject to third party intel-
lectual property claims:
a) under intellectual property rights (other than patent or trademark) licensable by initial developer to use, repro-
duce, modify, display, perform, sublicense and distrib-
ute the original code (or portions thereof) with or with-
out modifications, and/or as part of a larger work; and
(b) under patents claims infringed by the making, using or selling of original code, to make, have made, use, prac-
tice, sell, and offer for sale, and/or otherwise dispose of the original code (or portions there of). A P P E N D I X 131 APPENDIX
(c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license.
(d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each contributor hereby grants You a world-wide, royalty-free, non-exclusive license
(a) under intellectual property rights (other than patent or trademark) licensable by contributor, to use, reproduce, modify, display, perform, sublicense and distribute the modifications created by such contribu-
tor (or portions thereof) either on an unmodified basis, with other modifications, as covered code and/or as part of a larger work; and
(b) under patent claims infringed by the making, using, or selling of modifications made by that contributor either alone and/or in combination with its contributor version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) modifications made by that contributor
(or portions thereof); and 2) the combination of mod-
ifications made by that contributor with its contributor version (or portions of such combination).
(c) the licenses granted in sections 2.2(a) and 2.2(b) are effective on the date contributor first makes commer-
cial use of the covered code.
(d) Notwithstanding section 2.2(b) above, no patent license is granted: 1) for any code that contributor has deleted from the contributor version; 2) separate from the contributor version; 3) for infringements caused by: i) third party modifications of contributor version or ii) the combination of modifications made by that contributor with other software (except as part of the contributor version) or other devices; or 4) under patent claims infringed by covered code in the absence of modifications made by that contributor. 3. Distribution Obligations. 3.1. Application of license. The modifications which You create or to which you con-
tribute are governed by the terms of this license, including without limitation section 2.2. The source code version of covered code may be distributed only under the terms of this license or a future version of this license released under section 6.1, and you must include a copy of this license with every copy of the source code you distribute. You may not offer or impose any terms on any source code version that alters or restricts the applicable version of this license or the recipients' rights hereunder. However, you may include an additional document offering the additional rights described in section 3.5. 3.2. Availability of source code. Any modification which you create or to which you con-
tribute must be made available in source code form under the terms of this license either on the same media as an executable version or via an accepted electronic distribu-
tion mechanism to anyone to whom you made an exe-
cutable version available; and if made available via elec-
tronic distribution mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular modification has been made available to such recipients. You are responsible for ensur-
ing that the source code version remains available even if the electronic distribution mechanism is maintained by a third party. 3.3. Description of modifications. 3.4. You must cause all covered code to which you contribute to contain a file documenting the changes You made to create that covered code and the date of any change. You must include a prominent statement that the modification is derived, directly or indirectly, from original code provided by the initial developer and including the name of the initial developer in (a) the source code, and (b) in any notice in an executable version or related documentation in which you describe the origin or ownership of the covered code. Intellectual property matters
(a) Third party claims. If contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such contributor under sections 2.1 or 2.2, contributor must include a text file with the source code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If contributor obtains such knowledge after the modification is made available as described in section 3.2, contributor shall promptly modi-
fy the LEGAL file in all copies contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calcu-
lated to inform those who received the covered code that new knowledge has been obtained.
(b) Contributor APIs. If contributor's modifications include an application programming interface and contributor has knowledge of patent licenses which are reasonably necessary to implement that API, contributor must also include this information in the LEGAL file. A P P E N D I X 132
(c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Larger works. You may create a larger work by combining covered code with other code not governed by the terms of this license and distribute the larger work as a single product. In such a case, you must make sure the requirements of this license are fulfilled for the covered code. 3.5. Required notices. 4. Inability to comply due to statute or regulation. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A. you must also duplicate this license in any documentation for the source code where You describe recipients' rights or ownership rights relating to covered code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of covered code. However, you may do so only on your own behalf, and not on behalf of the Initial developer or any contributor. You must make it absolutely clear than any such warranty, support, indemni-
ty or liability obligation is offered by you alone, and You hereby agree to indemnify the Initial developer and every contributor for any liability incurred by the Initial develop-
er or such contributor as a result of warranty, support, indemnity or liability terms you offer. 3.6. Distribution of executable versions. You may distribute covered code in executable form only if the requirements of section 3.1-3.5 have been met for that covered code, and if you include a notice stating that the source code version of the covered code is available under the terms of this license, including a description of how and where you have fulfilled the obligations of section 3.2. The notice must be conspicuously included in any notice in an executable version, related documentation or collateral in which you describe recipients' rights relating to the covered code. You may distribute the executable version of covered code or ownership rights under a license of your choice, which may contain terms different from this license, provided that you are in compliance with the terms of this license and that the license for the exe-
cutable version does not attempt to limit or alter the recip-
ient's rights in the source code version from the rights set forth in this license. If you distribute the executable ver-
sion under a different license you must make it absolutely clear that any terms which differ from this license are offered by you alone, not by the Initial developer or any contributor. You hereby agree to indemnify the initial developer and every contributor for any liability incurred by the initial developer or such contributor as a result of any such terms You offer. If it is impossible for you to comply with any of the terms of this license with respect to some or all of the covered code due to statute, judicial order, or regulation then you must: (a) comply with the terms of this license to the max-
imum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in section 3.4 and must be included with all distributions of the source code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this license. This license applies to code to which the initial developer has attached the notice in exhibit A and to related covered code. 6. Versions of the license. 6.1. New versions. Netscape communications corporation (Netscape) may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. 6.2. Effect of new versions. Once covered code has been published under a particular version of the license, you may always continue to use it under the terms of that version. You may also choose to use such covered code under the terms of any subsequent version of the license published by netscape. No one other than netscape has the right to modify the terms applicable to covered code created under this license. A P P E N D I X 6.3. Derivative works. If You create or use a modified version of this license
(which you may only do in order to apply it to code which is not already covered code governed by this license), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL",
"NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this license) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public license and netscape Public License. (Filling in the name of the initial developer, original code or con-
tributor in the notice described in exhibit A shall not of themselves be deemed to be modifications of this license.) 133 APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COV-
ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFOR-
MANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This license and the rights granted hereunder will terminate automatically if you fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the covered code which are properly granted shall survive any termination of this license. Provisions which, by their nature, must remain in effect beyond the termination of this license shall survive. 8.2. If you initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against ini-
tial developer or a contributor (the initial developer or contributor against whom you file such action is referred to as Participant) alleging that:
(a) such participant's contributor version directly or indi-
rectly infringes any patent, then any and all rights granted by such participant to you under sections 2.1 and/or 2.2 of this license shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice you either: (i) agree in writing to pay participant a mutually agreeable reasonable royalty for your past and future use of modifications made by such participant, or (ii) withdraw your litigation claim with respect to the contributor version against such participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by partici-
pant to you under sections 2.1 and/or 2.2 automati-
cally terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such par-
ticipant's contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such participant under sections 2.1(b) and 2.2(b) are revoked effective as of the date you first made, used, sold, distributed, or had made, modifications made by that participant. 8.3. If you assert a patent infringement claim against partici-
pant alleging that such participant's contributor version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the rea-
sonable value of the licenses granted by such participant under sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by you or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DIS-
TRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITH-
OUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNC-
TION, OR ANY AND ALL OTHER COMMERCIAL DAM-
AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-
AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULT-
ING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-
AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The covered code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4
(June 1995), all U.S. Government end users acquire cov-
ered code with only those rights set forth herein. A P P E N D I X 134 11. MISCELLANEOUS. EXHIBIT A -Mozilla Public License. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions
(except to the extent applicable law, if any, provides oth-
erwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the united states of america, any litigation relating to this License shall be subject to the jurisdiction of the federal courts of the northern district of california, with venue lying in santa clara county, california, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the united nations convention on contracts for the International sale of goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this license. 12. RESPONSIBILITY FOR CLAIMS. As between initial developer and the contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this license and you agree to work with initial developer and contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial developer may designate portions of the covered code as "Multiple-Licensed". "Multiple-Licensed" means that the initial developer permits you to utilize portions of the covered code under your choice of the NPL or the alternative licenses, if any, specified by the initial developer in the file described in exhibit A. The contents of this file are subject to the Mozilla Public License Version 1.1 (the license); you may not use this file except in compliance with the License. You may obtain a copy of the license at http://www.mozilla.org/MPL/
Software distributed under the license is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the license for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. Initial Developer The is___________________. Portions created by ______________________ are Copyright (C) _______________________. All Rights Reserved. the Original Code of Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] license are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] license and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] license. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] license."
NOTE: The text of this exhibit A may differ slightly from the text of the notices in the source code files of the original code. You should use the text of this exhibit A rather than the text found in the original code/source code for Your modifications. A P P E N D I X 135 Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :
EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950-1
; Radio Frequency Interference
; Electromagnetic Immunity
; Power Line Harmonics
; Voltage Fluctuations
; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO'99 (TCO'99 applied model only) Congratulations!
You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 01 Regulatory Information cont. Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?
The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:
TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-
eating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict standards for disposal. TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**
Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one 02 Regulatory Information cont. exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________
* Bio-accumulative is defined as substances which accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO03 (TCO03 applied model only) Congratulations!
The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:
Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields 03 Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/about/environment/html/Recycling.jsp Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-
Hndler oder einen Unternehmensvertreter von LG. 04 Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp Franais Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :
http://www.lge.com/about/environment/html/Recycling.jsp Regulatory Information cont. Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/about/environment/html/Recycling.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que 05 respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/about/environment/html/Recycling.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar Regulatory Information cont. especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-
vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian 1994 LGE
' LG ',
. 06 Regulatory Information cont. K LGE
. LG.
http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne 2002/96/EC. 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-
ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques ventuels pour l'environnement et la sant humaine. 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce produit. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di 08 un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 2.Kaikki elektroniset laitteet ovat ongelmajtett, 1. joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten
, E O 2002/96/EOK. 2.H
. 3.H
. 4.
. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 09 Regulatory Information cont. Portuguese Hungarian Polish 10 Slovak Czech Croatian Regulatory Information cont. Estonian Latvian Lithuanian 11
This product uses the FCC Data API but is not endorsed or certified by the FCC