submitted | available | document details (if available) | source link |
---|---|---|---|
various | User manual 1 of 2 | Users Manual | 3.49 MiB |
LCD TV OWNERS MANUAL PLASMA TV PLASMA TV MODELS 42PG60 50PG60 60PG60 LCD TV MODEL 32LG30 37LG30 42LG30 37LG50 42LG50 47LG50 52LG50 32LG60 37LG60 42LG60 47LG60 52LG60 32LG70 42LG70 47LG70 52LG70 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/NO : SAC30708020 (0801-REV01) www.lgusa.com / www.lg.ca ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-
ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER CAUTION This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product 1 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturers option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. 1 2 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat. When mounting a TV it on the wall, make sure not to install TV by the hanging power and sig-
nal cables on the back of the TV. 4 5 2 6 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 7 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 8 Only use attachments/accessories specified by the manufacturer. 9 Unplug this apparatus when unused for long periods of time. 10 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Never touch this apparatus or antenna during a thunder or lighting storm. 15 11 12 13 14 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam-
age or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Outdoor use marking :
WARNING - To reduce the risk of fire or elec-
tric shock, do not expose this appliance to rain or moisture. 16 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. 17 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker 18 DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. 3 CONTENTS WARNING / CAUTION . 1 Channel Setup SAFETY INSTRUCTIONS . 2 FEATURE OF THIS TV . 6 PREPARATION Accessories . 7 Front Panel Information . 8 Back Panel Information . 10 Stand Installation . 14 Cable Management . 16 Desktop Pedestal Installation . 18 Swivel Stand . 18 Attaching the TV to a Desk . 18 VESA Wall Mounting . 19 Protection Cover . 20 Securing the TV to the wall to prevent falling . 21 Antenna or Cable Connection . 22 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 23 DVD Setup . 29 VCR Setup . 33 Other A/V Source Setup . 36 PC Setup . 37 USB Connection . 46 Audio Out Connection . 47 WATCHING TV / CHANNEL CONTROL Remote Control Functions . 48 Turning On TV . 50 Channel Selection . 50 Volume Adjustment . 50 Quick Menu . 51 Initial Setting . 52 On-Screen Menus Selection . 54
- Auto Scan (Auto Tuning) . 56
- Add / Delete Channel (Manual Tuning) . 57
- Channel Editing . 58 Input List . 59 Input Label . 60 AV Mode . 61 SIMPLINK . 62 USB Entry Modes . 64 Photo List . 65 Music List . 69 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 72 Preset Picture Settings
- Picture Mode - Preset . 74
- Color Tone - Preset . 75 Manual Picture Adjustment
- Picture Mode - User Mode . 76
- Picture Mode - Expert Control . 77 Picture Improvement Technology . 78 Advanced Control - Black (Darkness) Level . 79 Advanced Control - Eye Care . 80 Advanced - Real Cinema/Film Mode . 81 Advanced - TruMotion . 82 TruMotion Demo . 83 Picture Reset . 84 Power Indicator . 85 Image Sticking Minimization (ISM) Method . 86 Power Saving Picture Mode . 87 4 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 118 Maintenance . 120 Product Specifications . 121 Programming the Remote Control . 124 IR Codes . 127 External Control Through RS-232C . 129 Open Source License . 136 Auto Volume Leveler (Auto Volume) . 88 Preset Sound Setting (Sound Mode) . 89 Sound Setting Adjustment - User Mode . 90 Clear Voice . 91 Balance . 92 TV Speakers On/Off Setup . 93 Audio Reset . 94 Stereo/SAP Broadcasts Setup . 95 Audio Language . 96 On-Screen Menus Language Selection . 97 Caption Mode
- Analog Broadcasting System Captions . 98
- Digital Broadcasting System Captions . 99
- Caption Option . 100 TIME SETTING Clock Setting
- Auto Clock Setup . 101
- Manual Clock Setup . 102 Auto On/Off Time Setting . 103 Sleep Timer Setting . 104 Auto Shut-off Setting . 105 PARENTAL CONTROL / RATINGS Set Password & Lock System . 106 Channel Blocking . 109 Movie & TV Rating . 110 Downloadable Rating . 115 External Input Blocking . 116 Key lock . 117 5 FEATURE OF THIS TV is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. FOR LCD TV I If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. I Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. I Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 6 PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. T V S T B Q. M E N U P O W E R D V D V C R IN P U T M E N U E N T E R R E T U R N V O L F A V A V M O D E Copyright 2007 LGE, All Rights Reserved. Owners Manual CD Manual 1 MUTE 4 2 C H P A G E 7 5 3 8 6 0 9 FLASHBK 1.5V 1.5V Remote Control, Batteries Power Cord 75ohm Round Cable
* Wipe spots on the exterior only with the polishing cloth.
* Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration. Polishing Cloth
(This feature is not available for all models.) OOppttiioonn EExxttrraass D-sub 15 pin Cable When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance. FFoorr PPllaassmmaa TTVV mmooddeellss
(Only 42PG60) x 4
(Only 50/60PG60) Cable Holder Bolts for stand assembly
(Refer to P.14) Cable Management Clip Protection Cover
(Refer to P.20) FFoorr LLCCDD TTVV mmooddeellss 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70
(Only 32/37/42LG30, 37/42LG50,
(Only 32LG30/70) 32/42LG70) x 4 x 4 or Bolts for stand assembly Screw for stand fixing
(Refer to P.14)
(Refer to P.18) Protection Cover
(Refer to P.20) 32/37/42/47/52LG60
(Only 32/37LG60)
(Only 42LG60) 32LG60: 3EA 37LG60: 4EA 4EA 2EA
(4x16) 1EA 4EA
(4x20) Protection Cover
(Refer to P.20) Cable Management Clip Bolts for stand assembly
(Refer to P.15) P R E P A R A T O N I 7 PREPARATION FRONT PANEL INFORMATION I Image shown may differ from your TV. I NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). Plasma TV Models P R E P A R A T O N I Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. INPUT MENU ENTER VOL CH INPUT MENU ENTER VOL INPUT MENU INPUT Button ENTER MENU Button VOL ENTER Button CH CH VOLUME
(-, +) Buttons CHANNEL
(EE,DD)Buttons LCD TV Models 32/42/47/52LG70 Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
(Can be adjusted using PPoowweerr IInnddiiccaattoorr in the OPTION menu. GG pp..8855) Remote Control Sensor POWER Button 8 CH CHANNEL (
Buttons
) VOL ENTER MENU INPUT VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button LCD TV Models 32/37/42LG30, 37/42/47/52LG50 Intelligent Sensor (Except 32/37/42LG30) Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
(Can be adjusted using PPoowweerr IInnddiiccaattoorr in the OPTION menu. GG pp..8855) Remote Control Sensor POWER Button 32/37/42/47/52LG60 Intelligent Sensor Adjusts picture according to the surrounding conditions. POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the set is switched on.
(Can be adjusted using PPoowweerr IInnddiiccaattoorr in the OPTION menu. GG pp..8855) CH VOL ENTER MENU INPUT CH VOL ENTER MENU INPUT CHANNEL (
Buttons
) VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button CHANNEL (
Buttons
) VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button P R E P A R A T O N I 9 PREPARATION BACK PANEL INFORMATION I Image shown may differ from your TV. Plasma TV Models 12 10 1 9 N I B S U 4 N I I M D H R R I O D R U A O N O M L
O E D V I AV IN 2 1 3 RGB IN HDMI/DVI IN RGB(PC) 5 4 ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL 6 7 3 2 1 2 1 COMPONENT IN RS-232C IN
(CONTROL & SERVICE) O E D V S
I VIDEO AUDIO 2 AUDIO OUT
( ) AUDIO 8 9 1 N I V A VIDEO
( ) MONO P R E P A R A T O N I 10 LCD TV Models R 32/37/42LG30 1 HDMI/DVI IN 2 1 37/42/47/52LG50 1 HDMI/DVI IN 2 1 2 1 2 1 12 3 RGB IN RGB(PC) 5 4 ANTENNA/
CABLE IN 6 AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL 7 RS-232C IN
(CONTROL & SERVICE) AUDIO OUT R VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO MONO
( ) AUDIO 1 N I V A 8 9
( ) 2 3 RGB IN RGB(PC) 5 4 ANTENNA/
CABLE IN 6 AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT 7 1 N I V A 8 9
( ) VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO MONO
( ) AUDIO 2 R P R E P A R A T O N I B S U Y L N O E C U V R E S 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 N I B S U 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 11 1 9 10 1 9 11 PREPARATION I Image shown may differ from your TV. LCD TV Models P R E P A R A T O N I 12 32/42/47/52LG70 R R 1 HDMI/DVI IN 3 RGB IN RGB(PC) 5 4 ANTENNA/
CABLE IN 6 AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL 7 3 2 1 RS-232C IN
(CONTROL & SERVICE) AUDIO OUT 8 1 N I V A S-VIDEO VIDEO MONO
( ) AUDIO
( ) 9 R 2 1 VIDEO COMPONENT IN AUDIO 2 10 1 9 N I B S U 4 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 N I I V D
I M D H N I B G R 32/37/42/47/52LG60 21 N I T N E N O P M O C O E D V I I O D U A 2 5 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL 3 AUDIO
(RGB/DVI) OPTICAL RGB(PC) ANTENNA/
CABLE IN 7 6 RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN 4 12 12 R 10
( ) 1 9 N I B S U 4 N I I M D H R I O D U A O N O M L
O E D V I AV IN 1 3 1 2 3 4 5 6 7 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included) 8 9 COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red and white for audio. P R E P A R A T O N I AUDIO OUT Analog audio output for use with amps and home theater systems. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). S-VIDEO Better quality than standard composition. Supports standard definition video only (480i). 10 USB INPUT Used for viewing photos and listening to MP3s. USB SERVICE ONLY Used for software updates. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. RGB (PC) Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable). AUDIO (RGB/DVI) 1/8 headphone jack for analog PC audio input. 11 12 REMOTE CONTROL PORT For a wired remote control. RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. DIGITAL AUDIO OUT Digital audio output for use with amps and home theater systems. Includes an optical and/or coaxial connection. Note: In standby mode, these ports do not work. 13 PREPARATION STAND INSTALLATION I Image shown may differ from your TV. Only 42PG60 Only 32/37/42LG30, 37/42LG50, 32/42LG70 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 2 Assemble the parts of the SSTTAANNDD BBOODDYY with CCOOVVEERR BBAASSEE of the TV. SSTTAANNDD BBOODDYY CCOOVVEERR BBAASSEE 3 Fix the 4 bolts securely using the holes in the back of the TV. 3 Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV. P R E P A R A T O N I 14 Only 32/37/42LG60 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the SSTTAANNDD BBOODDYY with CCOOVVEERR BBAASSEE of the TV. 32LG60 37LG60 42LG60 SSTTAANNDD BBOODDYY SSTTAANNDD BBOODDYY
(4x16) SSTTAANNDD BBOODDYY CCOOVVEERR BBAASSEE CCOOVVEERR BBAASSEE CCOOVVEERR BBAASSEE 3 Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV.
(4x20) P R E P A R A T O N I 15 PREPARATION CABLE MANAGEMENT I Image shown may differ from your TV. Plasma TV Models 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. P R E P A R A T O N I 2 Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. CABLE HOLDER CABLE MANAGEMENT CLIP How to remove the CABLE MANAGEMENT CLIP 42PG60 50/60PG60 GG First, press the cable management. Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP with both hands and pull it upward. GG Hold the CABLE MAN-
AGEMENT CLIP with both hands and pull it backward. GG Separate CCAABBLLEE MMAANN--
AAGGEEMMEENNTT CCLLIIPP from TV by pressing two latches. NOTE
GG Do not hold the CABLE MANAGEMENT CLIP when moving the TV.
- If the TV is dropped, you may be injured or the product may be broken. 16 LCD TV Models 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 32/37/42/47/52LG60 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 1 Align the hole with the tab on the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP. Turn the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP as shown. Note: This cable management can be broken by excessive pressure. 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. 2 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. P R E P A R A T O N I 17 PREPARATION DESKTOP PEDESTAL INSTALLATION I Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION GG Ensure adequate ventilation by following the clearance recommendations. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ATTACHING THE TV TO A DESK (Only 32LG30/70) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Stand Desk 1-Screw
(provided as parts of the product) WARNING GG To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. P R E P A R A T O N I 18 VESA WALL MOUNTING This TV accepts VESA FDMI compliant mounts via the four screw holes on the back of the TV. These mounts are sold by third parties and not available from LG. Refer to the instructions included with the mount for more info. Plasma TV Models 400 mm 400 mm R LCD TV Models 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 32/37/42/47/52LG60 200 mm
(Except 52LG50/70: 800 mm) 200 mm
(Except 52LG60: 800 mm)
( ) R 32LG30/70: 100 mm 37LG30/50: 200 mm 42LG30/50/70: 200 mm 47LG50/70: 200 mm 52LG50/70: 400 mm 32LG60: 100 mm 37/42/47LG60: 200 mm 52LG60: 400 mm R
NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.
( ) P R E P A R A T O N I 19 PREPARATION PROTECTION COVER I Image shown may differ from your TV. You can remove the stand before installing the TV on a wall mount by performing the previous stand instructions in reverse. After removing the stand, install the included pprrootteeccttiioonn ccoovveerr over the hole for the stand. Insert the PPRROOTTEECCTTIIOONN CCOOVVEERR into the TV until clicking sound. Plasma TV Models LCD TV Models After removing the protection paper from the protection cover, adhere it to the TV as shown. P R E P A R A T O N I 20 SECURING THE TV TO THE WALL TO PREVENT FALLING I You should purchase necessary components to prevent TV from falling off of the stand. I Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. P R E P A R A T O N I I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope (not provided as parts of the product, must pur-
chase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE
GG Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. GG To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same. 21 PREPARATION I To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed. P R E P A R A T O N I R R ANTENNA/
CABLE IN Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments
(Connect to wall antenna socket) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the copper wire when connecting the antenna.
( ) ANTENNA/
CABLE IN R RF Coaxial Wire (75 ohm) I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance.
( ) Antenna UHF VHF Signal Amplifier ANTENNA/
CABLE IN
NOTE GG The TV will let you know when the analog, cable, and digital channel scans are complete.
( ) 22 EXTERNAL EQUIPMENT SETUP I To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. I Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-
top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11 jacks on the TV. 2. How to use I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box. operation) I Select the CCoommppoonneenntt 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN22 input, select the CCoommppoonneenntt 22 input source on the TV. Supported Resolutions Signal 480i 480p 720p 1080i 1080p Component HDMI Yes Yes Yes Yes Yes No Yes Yes Yes Yes Y, CB/PB, CR/PR Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 E X T E R N A L E Q U I P M E N T S E T U P 23 EXTERNAL EQUIPMENT SETUP Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 Y PB PR L R E X T E R N A L E Q U I P M E N T S E T U P 24 1 2 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGI OPT RS-232
(CONTROL &
2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO S-VIDEO 32/37/42/47/52LG60 21 N I T N E N O P M O C O E D V I I O D U A 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL N I I V D
I I B G R M D 3 H AUDIO N
(RGB/DVI) OPTICAL RGB(PC) ANTENNA/
CABLE IN RS-232C IN TROL & SERVICE) REMOTE ONTROL IN 1 2 L R Y PB PR HDMI Connection 1. How to connect 1 2 Connect the digital set-top box to HHDDMMII//DDVVII IINN11, 22, 33, or 44 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) I Select the HHDDMMII11, HHDDMMII22, HHDDMMII33, or HHDDMMII44 input source on the TV using the IINNPPUUTT button on the remote control. HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.939 60.00 E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP 32/37/42LG30, 37/42/47/52LG50 Plasma TV, 32/42/47/52LG70 RGB IN RGB(PC) A
(RG 2 1 Y PB PR VIDEO COMPONENT HDMI/DVI IN 2 1 HDMI/DVI IN RGB IN RGB(PC) 3 2 1 Y PB PR VIDEO COMPON 1 1 HDMI-DTV OUTPUT HDMI-DTV OUTPUT 32/37/42/47/52LG60 1 HDMI-DTV OUTPUT N I T N E N O P M O C 21 O E D V I I O D U A 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL 3 AUDIO
(RGB/DVI) OPTICAL RGB(PC) N I I V D
I M D H N I B G R ANTENNA/
CABLE IN RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN E X T E R N A L E Q U I P M E N T S E T U P 26 DVI to HDMI Connection
NOTE GG A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary. 32/37/42LG30, 37/42/47/52LG50 Plasma TV, 32/42/47/52LG70 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN HDMI/DVI IN R
(CONT Y PB PR L R VIDEO COMPONENT IN AUDIO S 3 2 1 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOT CONTROL Y PB PR 2 1 L R VIDEO COMPONENT IN AUDIO
1 N I V A 2 1 2 HDMI/DVI IN 2 1 2 1 1 DVI-DTV OUTPUT L R DVI-DTV OUTPUT L R 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11, 22, or 33 jack on the TV. Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) I Select the HHDDMMII11, HHDDMMII22, or HHDDMMII33 input source on the TV using the IINNPPUUTT button on the remote con-
trol.
( ) E X T E R N A L E Q U I P M E N T S E T U P
( ) 27 EXTERNAL EQUIPMENT SETUP 32/37/42/47/52LG60 21 N I I V D
I M D H N I B G R N I T N E N O P M O C O E D V I I O D U A 2 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL 3 AUDIO
(RGB/DVI) OPTICAL RGB(PC) ANTENNA/
CABLE IN 1 RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN DVI-DTV OUTPUT L R 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11 jack on the TV. Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11 input source on the TV using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 28 DVD SETUP Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO11 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO11 jacks on the TV. 2. How to use I Turn on the DVD player, insert a DVD. I Select the CCoommppoonneenntt 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN 22 input, select the CCoommppoonneenntt 22 input source on the TV. I Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 Y PB PR L R E X T E R N A L E Q U I P M E N T S E T U P 30 1 2 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITA OPTICA RS-232C I
(CONTROL & SER 2 1 Y PB PR L R VIDEO COMPONENT IN AUDIO S-VIDEO V 32/37/42/47/52LG60 21 N I T N E N O P M O C O E D V I I O D U A 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL N I I V D
I I B G R M D 3 H AUDIO N
(RGB/DVI) OPTICAL RGB(PC) ANTENNA/
CABLE IN S-232C IN ROL & SERVICE) EMOTE NTROL IN 1 2 L R Y PB PR S-Video Connection (Except 32/37/42/47/52LG60) 1. How to connect 1 2 Connect the S-VIDEO output of the DVD to the SS --VVIIDDEEOO input on the TV. Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the TV. 2. How to use I Turn on the DVD player, insert a DVD. I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. S-VIDEO AUDIO L R ANTENNA/
CABLE IN UDIO B/DVI) REMOTE CONTROL IN 2 1 DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT L R AUDIO N S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A E X T E R N A L E Q U I P M E N T S E T U P 31 EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect 1 2 Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11, 22, 33 or 44 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use I Select the HHDDMMII11, HHDDMMII22, HHDDMMII33, or HHDDMMII44 input source on the TV using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. 32/37/42LG30, 37/42/47/52LG50 RGB(PC) AUDIO
(RGB/D 2 1 Y PB PR L VIDEO COMPONENT IN A HDMI/DVI IN 2 1 1 HDMI-DVD OUTPUT Plasma TV, 32/42/47/52LG70 32/37/42/47/52LG60 HDMI/DVI IN RGB IN RGB(PC) 3 2 1 Y PB PR
(R 2 1 VIDEO COMPONENT 1 HDMI-DVD OUTPUT 21 O E D V I I O D U A 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL 3 AUDIO
(RGB/DVI) N I I V D
I M D H N I B G R N I T N E N O P M O C
( ) OPTICAL RGB(PC) ANTENNA/
CABLE IN RS-232C IN
(CONTROL & SERVICE) 1 REMOTE CONTROL IN HDMI-DVD OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 32 VCR SETUP I To avoid picture noise (interference), leave an adequate distance between the VCR and TV. I Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time (Plasma TV models only). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. Antenna Connection 1. How to connect Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 1 2 Connect the RF antenna out socket of the VCR to the AANNTTEENNNNAA//CCAABBLLEE IINN sock-
et on the TV. ANTENNA/
CABLE IN UDIO OUT COAXIAL 1 Connect the antenna cable to the RF antenna in socket of the VCR. AUDIO OUT E) 2. How to use I Set VCR output switch to 3 or 4 and then EO L
(MONO) AUDIO R tune TV to the same channel number. I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) 1 N I V A 32/37/42/47/52LG60 S-VIDEO VIDEO L R ANT OUT OUTPUT SWITCH ANT IN 2 Wall Jack Antenna ANT OUT S-VIDEO VIDEO L R ANT IN OUTPUT SWITCH Wall Jack 2 Antenna COAX OPTIC ANTENNA/
CABLE IN P M O C I O D U A 1 RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN E X T E R N A L E Q U I P M E N T S E T U P 33 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 ANT IN S-VIDEO VIDEO L R 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN22, select AAVV22 input source on the TV. NOTE
GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the TV. ANT OUT OUTPUT SWITCH 1 ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT L R AUDIO NT IN S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A N I B S U 4 N I I M D H R I O D U A O N O M L
O E D V I AV IN 32/37/42/47/52LG60 1 ANT IN S-VIDEO VIDEO L R ANT OUT OUTPUT SWITCH E X T E R N A L E Q U I P M E N T S E T U P 34 S-Video Connection (Except 32/37/42/47/52LG60) 1. How to connect 1 2 Connect the S-VIDEO output of the VCR to the SS --VVIIDDEEOO input on the TV. ANT IN S-VIDEO VIDEO L R Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the TV. ANT OUT OUTPUT SWITCH ANTENNA/
CABLE IN AUDIO
(RGB/DVI) REMOTE CONTROL IN 2 1 DIGITAL AUDIO OUT OPTICAL COAXIAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT L R AUDIO NT IN S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control.
NOTE GG S-Video provides better quality than composite. Use it when available. CAUTION GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. E X T E R N A L E Q U I P M E N T S E T U P 35 Camcorder Video Game Set VIDEO L R 1 N I B S U 3 N I I M D H R I O D U A O N O M L
O E D V I EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use I Select the AA VV 22 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN11 input, select the AA VV 11 input source on the TV. I Operate the corresponding external equipment. E X T E R N A L E Q U I P M E N T S E T U P 36 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 32/37/42/47/52LG60 N 2 1 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN
(CO Y PB PR L R VIDEO COMPONENT IN AUDIO 1 2 N I T N E N O P M O C O E D V I I O D U A 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL D
I M D 3 H AUDIO N I B G R
(RGB/DVI) OPTICAL RGB(PC) ANTENNA/
CABLE IN 2 1 RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN RGB OUTPUT AUDIO RGB OUTPUT AUDIO 1. How to connect 1 2 Connect the VGA output of the PC to the RR GG BB ((PP CC)) jack on the TV. Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the PC and the TV. I Select the RRGGBB--PPCC input source on the TV using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 37 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 32/37/42LG30, 37/42/47/52LG50 Plasma TV, 32/42/47/52LG70 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN HDMI/DVI IN R
(CONT Y PB PR L R VIDEO COMPONENT IN AUDIO S 3 2 1 RGB IN RGB(PC) AUDIO
(RGB/DVI) REMOTE CONTROL IN
(CO Y PB PR 2 1 L R VIDEO COMPONENT IN AUDIO 1 N I V A 2 1 2 HDMI/DVI IN 2 1 2 1 1 DVI-PC OUTPUT AUDIO DVI-PC OUTPUT AUDIO 1. How to connect 1 2 Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN 11,, 22, or 33 jack on the TV. Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the PC and the TV. I Select the HHDDMMII11, HHDDMMII22, or HHDDMMII33 input source on the TV using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 38 N I I V D
I M D H N I B G R 1. How to connect 32/37/42/47/52LG60 21 1 2 Connect the DVI output of the PC to the HHDDMMII//DDVVII II NN 11 jack on the TV. Connect the PC audio output to the AA UU DD II OO
((RRGGBB//DDVVII)) jack on the TV. 1 2. How to use N I T N E N O P M O C O E D V I I O D U A 1 (DVI) 2 DIGITAL AUDIO OUT COAXIAL 3 AUDIO
(RGB/DVI) OPTICAL RGB(PC) ANTENNA/
CABLE IN I Turn on the PC and the TV. I Select the HHDDMMII11 input source on the TV using the IINNPPUUTT button on the remote control. RS-232C IN 2
(CONTROL & SERVICE) REMOTE CONTROL IN DVI-PC OUTPUT AUDIO
NOTES GG 32/37/42LG30: To get the the best picture qual-
ity, adjust the PC graphics card to 1360x768. GG 37/42/47/52LG50, 32/42/47/52LG70: To get the the best picture quality, adjust the PC graphics card to 1920x1080. GG For Plasma TVs: To get the the best picture quali-
ty, adjust the PC graphics card to 1360x768. GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-
ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen. GG The synchronization input form for Horizontal and Vertical frequencies is separate. E X T E R N A L E Q U I P M E N T S E T U P 39 EXTERNAL EQUIPMENT SETUP Supported Display Specifications (RGB-PC, HDMI-PC)
NOTE GG Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. For 32/37/42LG30 For 37/42/47/52LG50 Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 640x350 31.469 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768 31.469 31.469 37.879 48.363 47.776 47.720 47.130 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65
* Only RGB-PC mode 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 59.934 67.5 60.00
* Only RGB-PC mode E X T E R N A L E Q U I P M E N T S E T U P 40 For 50/60PG60 For 32/37/42/47/52LG60, 32/42/47/52LG70 Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 640x350 31.468 720x400 640x480 800x600 1024x768 1280x768 1280x1024 1360x768 1600x1200 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 1920x1080 66.587 59.934 1920x1080 67.5 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 60.00
* Only RGB-PC mode
* Only RGB-PC mode E X T E R N A L E Q U I P M E N T S E T U P 41 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The PPoossiittiioonn, PPhhaassee, and SSiizzee can also be adjusted. PICTURE Move Enter SCREEN Move MENU Prev. E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Resolution G Auto config. Position Size Phase Reset Only for LCD TV Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select RReessoolluuttiioonn. Select the desired resolution. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 42 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. PICTURE Move Enter SCREEN Move MENU Prev. E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo Resolution Auto config. G Position Size Phase Reset To Set Yes No 1 MENU Select PPIICCTTUURREE. 2 3 4 5 ENTER ENTER Select SSccrreeeenn ((RRGGBB--PPCC)). Select AAuuttoo ccoonnffiigg... ENTER Select YY ee ss. ENTER Start Auto Configuration. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the PP oo ss ii tt ii oo nn, SS ii zz ee or PPhhaassee. E X T E R N A L E Q U I P M E N T S E T U P 43 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto config. Position G Size Phase Reset F D E G 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select PPoossiittiioonn, SS ii zz ee, or PPhhaassee. Make appropriate adjustments. I PPoossiittiioonn: This function is to adjust pic-
ture to left/right and up/down as you prefer. I SS ii zz ee: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. I PP hh aa ss ee: This function allows you to remove any horizontal noise and clear or sharpen the image of characters. E X T E R N A L E Q U I P M E N T S E T U P 44 Screen Reset (Reset to original factory values) Returns PPoossiittiioonn, SS ii zz ee, and PPhhaassee to the default factory settings. This feature operates only in RGB-PC mode. PICTURE Move Enter E 50 60 60 0 Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) TruMotion Demo SCREEN Move MENU Prev. Resolution Auto config. Position Size Phase Reset G To Set Yes No Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select RReesseett. Select YY ee ss. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 45 EXTERNAL EQUIPMENT SETUP USB CONNECTION (Except 32/37/42LG30) or 1 N I B S U 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 1. How to connect 1 Connect the USB device to the UUSSBB II NN jack on the side of TV. 2. How to use I After connecting the UUSSBB II NN jack, you use the USB func-
tion. (GG pp..6644) E X T E R N A L E Q U I P M E N T S E T U P 46 AUDIO OUT CONNECTION Send the TVs audio to external audio equipment via the Audio Output port. Analog (Except 32/37/42/47/52LG60) 1. How to connect 1 2 Connect audio outputs to the TVs AAUUDDIIOO OOUUTT jacks. Set the TV Speaker option - Off in the AUDIO menu.
(GG pp..9933). See the external audio equipment instruction manual for operation. Digital 1. How to connect RS-232C IN
(CONTROL & SERVICE) AUDIO OUT R AUDIO S-VIDEO VIDEO L
(MONO) AUDIO R 1 L R AUDIO 1 N I V A 1 2 3 Connect one end of the optical or coaxial cable to the TVs OOPPTTIICCAALL or CCOOAAXXIIAALL (Except 32/37/42LG30) port of DDIIGGIITTAALL AAUUDDIIOO OOUUTT. Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment. ANTENNA/
CABLE IN UDIO B/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL COAXIAL Set the TV Speaker option - Off in the AUDIO menu. (GG pp..9933). See the external audio equipment instruction manu-
al for operation. RS-232C IN 1
(CONTROL & SERVICE) AUDIO OUT L R AUDIO N S-VIDEO VIDEO L
(MONO) AUDIO R 1 N I V A 2
NOTE GG When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (GG pp .. 99 33) CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision. GG Block the SPDIF out (optical/coaxial) about the contents with ACP(Audio Copy Protection) function. E X T E R N A L E Q U I P M E N T S E T U P 47 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. GG pp..5511 TV POWER DVD STB Q. MENU MENU VCR INPUT MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. ENTER INPUT External input modes rotate in regular sequence. VOLUME UP
/DOWN Increase/decrease the sound level. FAV Scroll through the programmed Favorite channels. GG pp..5511 MUTE Switch the sound on or off. GG pp..5500 CHANNEL UP/DOWN PAGE UP/DOWN NUMBER button
(DASH) Select available channels. Move from one full set of screen information to the next one. Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed. RETURN AV MODE VOL 1 4 7 FAV MUTE 2 5 8 0 CH P A G E 3 6 9 FLASHBK VCR/DVD, USB, SIMPLINK Control buttons Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices. W A T C H I N G T V
C H A N N E L C O N T R O L 48 THUMBSTICK
(Up/Down/Left Right/ENTER) Navigate the on-screen menus and adjust the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. GG pp..6622--6633 AV MODE It helps you select and set images and sounds when connecting AV devices. GG pp..6611 Installing Batteries I Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). I Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. I Close cover. W A T C H I N G T V
C H A N N E L C O N T R O L 49 WATCHING TV / CHANNEL CONTROL TURNING ON TV 1 2 3 First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the
, IINNPPUUTT, CCHH ((
button on the TV or press the PPOOWWEERR, IINNPPUUTT, CCHH((
((00~99)) button on the remote control. or or
)), NNuummbbeerr Select the viewing source by using the IINNPPUUTT button on the remote control. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the PPOOWWEERR button on the remote control. The TV reverts to standby mode.
NOTE GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION 1 Press the CCHH ((
or
)) or NNUUMMBBEERR buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 2 3 Press the VVOOLL ((++ or --)) button to adjust the volume. If you want to switch the sound off, press the MMUUTTEE button. You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((++ or --)) button. W A T C H I N G T V
C H A N N E L C O N T R O L 50 QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. I AAssppeecctt RRaattiioo: Selects your desired picture format. I PPoowweerr SSaavviinngg (Plasma TV Only): Adjusts screen brightness to reduce the power consumption of the TV. I BBaacckklliigghhtt (LCD TV Only): Adjust the brightness of LCD panel to control the brightness of the screen. I CClleeaarr VVooiiccee: By differentiating the human sound range from others, it helps make human voices sound better. I PPiiccttuurree MMooddee: Selects the factory preset picture depend on the viewing environment. I SSoouunndd MMooddee: Selects the factory preset sound for type of program. I CCaappttiioonn: Select on or off. I MMuullttii AAuuddiioo: Changes the audio language (Digital signal). SSAAPP: Selects MTS sound (Analog signal). I SSlleeeepp TTiimmeerr: Select the amount of time before your TV turns off automatically. I DDeell//AAdddd//FFaavv: Select channel you want to add/delete or add the channel to the Favorite List. I UUSSBB EEjjeecctt: Select USB Eject in order to eject USB device. Plasma TV Q.Menu LCD TV Q.Menu Aspect Ratio FF 16:9 GG Aspect Ratio FF 16:9 GG Power Saving Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 3 Off Vivid Standard Off English Off Add Eject Backlight Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav USB Eject CH 3 Off Vivid Standard Off English Off Add Eject Close Close Except 32/37/42LG30 1Q. MENU 2 3Q. MENU Display each menu. Make appropriate adjustments. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 51 WATCHING TV /CHANNEL CONTROL INITIAL SETTING - LCD TV Only This Function guides the user to easily set the essential items for viewing the TV for the first time when pur-
chasing the TV. If will be displayed on the screen when turning the TV on for the first time. It can also be acti-
vated from the user menus. I IInn--SSttoorree MMooddee: Picture mode is set to VViivviidd. Customers can adjust the Picture Mode manually while inspecting the TV, but the TV will automatically return to VViivviidd preset after 5 minutes. I HHoommee MMooddee: Picture mode is set to VViivviidd and user can change it to whatever they wish. Step1. Mode setting Step1. Mode Setting
It sets a use environment. Select the set where mode. In Store Home Enter RETURN Exit Step2. Time setting Step2. Time Setting Current Time Setting FF Auto GG Year Month Date Hour Minute Time Zone Daylight Saving 2007 11 15 5 PM 52 Eastern Off Enter RETURN Exit Select HH oo mm ee Mode. Select AAuuttoo or MMaannuuaall. Select desired time option. 1 2 ENTER 1 2 3 ENTER W A T C H I N G T V
C H A N N E L C O N T R O L 52 Step3. Option setting Step3. Option Setting 1. OSD Language Setting FF English GG 2. Audio Language Setting French Enter RETURN Exit Step4. Auto Tuning Step4. Auto Tuning Auto Tuning can change channel map. Do you want to start Auto Tuning?
Enter Enter RETURN Exit Select OOSSDD LLaanngguuaaggee SSeettttiinngg or AAuuddiioo LLaanngguuaaggee SSeettttiinngg. Select your desired language. 1 2 3 ENTER 1 ENTER Start AAuuttoo TTuunniinngg.
NOTE I You can also adjust IInniittiiaall SSeettttiinngg in the OOPPTTIIOONN menu. OPTION E Initial Setting Move Enter 1 MENU 2 3 ENTER ENTER Select OOPPTTIIOONN. Select IInniittiiaall SSeettttiinngg. W A T C H I N G T V
C H A N N E L C O N T R O L 53 WATCHING TV /CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. All models (Except 32/37/42LG30) CHANNEL Move Enter PICTURE Move Enter Auto Tuning Manual Tuning Channel Edit Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G OPTION Move Enter Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID E
: English
: On
: Off
: Off
: Normal
: Level 0
: 1 CHANNEL PICTURE AUDIO TIME OPTION LOCK INPUT USB AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off LOCK Move Enter INPUT Move Enter USB Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI1 E PHOTO LIST MUSIC LIST 1 MENU Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU Return to TV viewing.
NOTE GG IISSMM MMeetthhoodd, PPoowweerr SSaavviinngg: Only PPllaassmmaa TTVV. GG BBaacckklliigghhtt,, PPoowweerr IInnddiiccaattoorr,, TTrruuMMoottiioonn DDeemmoo: Only LLCCDD TTVV.
(But, TT rr uu MM oo tt ii oo nn DD ee mm oo: Only for 3322//3377//4422//4477//5522LLGG6600,, 3322//4422//4477//5522LLGG7700) W A T C H I N G T V
C H A N N E L C O N T R O L 54 Only for 32/37/42LG30 CHANNEL Move Enter PICTURE Move Enter AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G CHANNEL PICTURE AUDIO TIME OPTION LOCK LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Auto Tuning Manual Tuning Channel Edit TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1 1 MENU Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 55
This product uses the FCC Data API but is not endorsed or certified by the FCC