42PX3DCVUC PDP Display Users Manual

 

PLASMA TV OWNERS MANUAL MODEL: 42PX3DCV 42PX3DCV-UC Please read this manual carefully and completely before operating your TV. Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below. See the label attached on the back cover and relate this information to your dealer if you require service. Model Number :

Serial Number :

LG Electronics U.S.A., Inc. Warning/Caution WWarning/Caution arning/Caution

/CAUTION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appli-

ance. WARNING/CAUTION:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compli-

ance could void the users authority to operate the equipment. CAUTION:

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized mod-

ification could void the users authority to operate this product. COMPLIANCE:

The responsible party for this products compliance is:

LG Electronics U.S.A., Inc 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 1-800-243-0000 http://www.lgusa.com WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 2 Plasma TV Safety Instructions Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara-

tus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be includ-

ed where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturers option, a picture or drawing that illus-

trates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction :

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-

fiers)that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING Owners Manual 3 Safety Instructions Safety Instructions Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION concerning the Power Cord :

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. 16. Outdoor Use Marking :

WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture. 17. Wet Location Marking :

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 4 Plasma TV Contents Contents Warning/Caution . 2 Safety Instructions . 3~4 Introduction Controls . 7 Connection Options . 8 Remote Control Key Functions . 9~10 Installation Accessories . 11 Installation Instructions . 11~12 Joining the TV assembly to the wall to protect the set tumbling . 11 External Equipment Connections . 13~18 Antenna or Cable Connection . 13~14 VCR Setup . 14 External A/V Source Setup . 15 DVD Setup . 15 CableCARDTM Setup . 16 HDSTB Setup . 16 PC Setup . 17 Monitor Out Setup . 18 Digital Audio Output . 18 HDMI . 19~21 Operation Turning the TV On . 22 On-screen Menus Language Selection . 22 Setup Menu Options EZ Scan (Channel Search) . 23 Manual Scan . 23 Channel Edit . 24 DTV Signal Strength . 24 Channel Label Setup . 25 Input Source . 25 Input Label . 25 Video Menu Options EZ Picture . 26 Manual Picture Control (Custom Option) . 26 Color Temperature Control . 26 Video Reset . 26 Audio Menu Options Audio Language . 27 EZ SoundRite / EZ Sound . 27 Contents Manual Sound Control (Custom Option) . 27 Front Surround . 28 TV Speakers On/Off Setup . 28 BBE . 29 Stereo/SAP Broadcasts Setup . 29 Time Menu Options Auto Clock Setup . 30 Manual Clock Setup . 30 On/Off Timer Setup . 30 Sleep Timer / Auto Off . 31 Option Menu Features Aspect Ratio Control . 32 Cinema 3:2 Mode Setup . 32 Caption . 33 Caption / Text . 33 Caption Option

. 34 ISM Method . 34 Low Power . 35 Lock Menu Options Parental Lock Setup . 37 EPG (Electronic Program Guide) . 38 Brief Info. . 39 EZ Mute . 40 Freeze & Magnify . 40 Screen Setup for PC mode . 41 APM(Adaptive Picture Mode) . 42 External Control Device Setup . 43~48 IR Codes . 49~50 Programming the Remote . 51 Programming Codes . 52~53 Troubleshooting Checklist . 54 Maintenance . 55 Product Specifications . 56 Warranty . 59~60 Setup and Operation Checklist Setup and Operation Checklist Setup and Operation Checklist

(See pages 13~21 for available connection and operational setup options.) 1. Unpack TV and all accessories. 5. Turn video source equipment on. 2. Connect all external video and audio equipment. 6. Select viewing source for TV. see pages 13~18. See pages 25. 3 Install batteries in remote control. 7. Fine-tune source image and sound to your personal prefer-

See page 9. 4. Turn TV on. See page 22. ence or as required by source. See pages 26~ 29. 8. Additional features set up See Contents above. After reading this manual, keep it handy for future reference. Owners Manual 5 Introduction Introduction Introduction What is a Plasma Display Panel (PDP)?

A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps. How does it work?

PDP is an array of cells, known as pixels, which are comprised of 3 sub pixels, corresponding to the colors red, green, and blue. Gas in a plasma state is used to react with phosphors in each sub-pixel to produce colored light (red, green, or blue). These phos-

phors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors. You get the rich, dynamic colors that you expect. Each sub-pixel is individually controlled by advanced electronics to produce over 16 million different colors. All of these mean that you get perfect images that are easily viewable in a display that is less than 5 inches thick. 160 - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is clear and visible to viewers anywhere in the room who can see the screen. Wide Screen The screen of the Plasma Display is so wide that your viewing experience is as if you are in a theater. Multimedia Connect your plasma display to a PC and you can use it for conferencing, games, and Internet browsing. Versatile The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs will not fit. The PDP Manufacturing Process: a few minute colored dots may be present on the PDP screen The PDP (Plasma Display Panel), which is the display device of this product, is composed of 0.9 to 2.2 million cells. A few cell defects will normally occur in the PDP manufacturing process. Several tiny, minute colored dots visible on the screen should be acceptable. This also occurs in other PDP manufacturers' products. The tiny dots appearing does not mean that this PDP is defec-

tive. Thus a few cell defects are not sufficient cause for the PDP to be exchanged or returned. Our production technology mini-

mizes these cell defects during the manufacture and operation of this product. 6 Plasma TV Introduction Controls Controls

- This is a simplified representation of front panel. Here shown may be somewhat different from your TV. Front Panel Controls Front Panel Controls TV/VIDEO MENU ENTER VOL PR Remote Control Sensor ENTER Button CHANNEL (E, D) Buttons VOLUME (F,G) Buttons MENU Button TV/VIDEO Button POWER Button Power Standby Indicator

-Without CableCARDTM : Illuminates red in stand-

by mode, Illuminates green when the TV is turned on.

-Inserting the CableCARDTM : Illuminates orange in standby mode, Illuminates green when the TV is turned on. Owners Manual 7 Introduction Connection Options Connection Options Back Connection Panel Back Connection Panel FRONT A/V INPUT S-VIDEO Input A connection available to provide bet-

ter picture quality than the video input. VIDEO Input Connects the video signal from a video device. AUDIO Input Use to connect to hear stereo sound from an external device. O E D V S

I O E D V I O N O M

L I O D U A R RGB/AUDIO INPUT Connect the monitor output connector from a PC to the appropriate input port. Remote Control Port Connect your wired remote control here. RS-232C INPUT (CON-

TROL/SERVICE) PORT Connect to the RS-232C port on a PC. HDMI/DVI connect a DVI(Video) signal to HDMI/DVI. RS-232C INPUT

(CONTROL/SERVICE) S-Video Input Connect S-Video out from an S-VIDEO device to the S-

VIDEO input. Antenna Input Connect over-the-

air signals to this jack. HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT COMPONENT INPUT 1

(MONO) A/V INPUT S-VIDEO REMOTE CONTROL CABLE ANTENNA AC INPUT Audio/Video Input Connect audio/video output from an external device to these jacks. DVD/DTV Input

(Component 1-2) Connect a component video/audio device to these jacks. Monitor Output Connect a sec-

ond TV or Monitor. CABLE Input Connect cable signals to this jack, either directly or through a cable box. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. Digital Audio (DVI: Digital Visual Interface/Component2) Input/

Digital Audio Output Connect digital audio from vari-

ous types of equipment. Note: In standby mode, these ports will not work. 8 Plasma TV Remote Control Key Functions Remote Control Key Functions

- When using the remote control, aim it at the remote control sensor on the TV. Introduction TV INPUT Rotates the input mode between Antenna and Cable. Video, Front Video, Component 1-2, RGB-

DTV (or RGB-PC) and HDMI/DVI input sources, screen returns to the last TV. MODE Selects the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB. Select a mode other than TV, for the remote to operate an external device. MENU Brings up the main menu to the screen. EXIT Clears all on-screen displays and returns to TV viewing from any menu. TIMER Lets you select the amount of time before your TV turns itself off automatically. MUTE Switches the sound on or off.(Refer to p.42) EZ PIC Selects a factory preset picture mode depending on the viewing environment. TV INPUT TV/VIDEO MODE D A Y

DAY +

GUIDE EXIT TIMER CC TV/VIDEO External input modes rotate in regular sequence: Antenna, Cable, Video, Front Video, Component 1-2, RGB-DTV (or RGB-PC) and HDMI/DVI input sources.

(Video, Front Video, Component 1-2 input sources are linked automatically, only if these are connected ) RATIO Changes the aspect ratio. INFO When you watch the TV, information dis-

plays on top of the screen. Not available in Component 1-2, RGB and HDMI/DVI mode. (Refer to p.41) FLASHBK FREEZE APM FAV Scrolls the Favorite channels. FLASHBK Tunes to the recent channels. FREEZE Freezes the currently-viewed picture. Main picture is frozen. Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.5V AA batteries. Dont mix old or used batteries with new ones. Close cover. Owners Manual 9 Introduction Remote Control Key Functions Remote Control Key Functions POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT TV/VIDEO VCR/DVD BUTTONS Control some video cassette recorders or DVD players. ("RECORD" button is not available for DVD players.) GUIDE Shows program schedule. MODE D A Y

DAY +

GUIDE DAY+/DAY-

Moves the Listings Grid forward or back-

ward in 24 hour increments. THUMBSTICK (Up/Down/Left/Right/ENTER) Allows you to navigate the on-screen menus and adjust the system settings to your pref-

erence. CC Select a closed caption:

Off, CC1~4, Text1~4. EXIT TIMER CC CHANNEL UP/DOWN Selects available channels found with EZ scan. PAGE UP/PAGE DOWN Moves from one full set of screen infor-

mation to the next one. NUMBER buttons FLASHBK FREEZE APM SAP Selects MTS sound: Mono, Stereo, and SAP in Analog mode. Change the audio language in DTV mode. APM(Adaptive Picture Mode) Concurrently, compare with the Daylight, Normal, Night Time.and Custom on the screen. VOLUME UP/DOWN Increases/decreases the sound level. EZ SOUND Selects the sound appropriate for the pro-

gram's character. ADJUST Adjusts screen position, size, and phase in PC mode. LIGHT Illuminates the remote control buttons of selected mode. 10 Plasma TV Installation Installation Accessories Accessories Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. Installation 1.5V 1 . 5 V Owners Manual Batteries Power Cord 75 Round Cable TV INPUT TV/VIDEO MODE D A Y

DAY +

GUIDE EXIT TIMER CC FLASHBK Remote Control 2-Wall brackets 2-eye-bolts D-sub 15 pin Cable Installation Instructions Installation Instructions Joining the TV assembly to the wall to protect the set tumbling

- Secure the TV assembly by joining it to a wall by using the TV/Wall brackets. If the set will be mounted on a desk top, insert the 2 eye-bolts and tighten them securely in the upper holes as shown. Install the wall brackets on the wall with 2 bolts*, (not supplied with the product), as shown. Match the height of the eye-bolts and the wall brack-

ets. Check to be sure the eye-bolts and the brackets are tightened securely. Secure the TV assembly to the wall with strong strings or wire cables, (not supplied with the product), as shown. Owners Manual 11 Installation Installation Instructions Installation Instructions The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker WWall Mount: Horizontal installation all Mount: Horizontal installation Desktop Pedestal Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4 on each side and 2 from the wall. Detailed installation instruc-

tions are available from your dealer, see the optional Wall Mounting Bracket Installation. For proper ventilation, allow a clearance of 4 on each side and the top, 2.36 on the bottom, and 2 from the wall. Detailed installation instructions are included in the optional Desktop Stand Installation. 4 inches 2 inches 4 inches 2 inches 4 inches 4 inches 4 inches 4 inches 4 inches 2.36 inches 12 Plasma TV Installation External Equipment Connections External Equipment Connections Antenna or Cable Connection Antenna or Cable Connection 1. Analog and Digital TV signals provided on antenna

- Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments

(Connect to wall antenna socket) Wall Antenna Socket RF Coaxial Wire (75 ohm) Bronze Wire CABLE ANTENNA AC INPUT VHF Antenna UHF Antenna Turn clockwise to tighten. Outdoor Antenna Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna) Bronze Wire Be careful not to bend the bronze wire when connecting the antenna. 2. Analog and Digital TV signals provided on cable Cable TV Wall Jack Bronze Wire RF Coaxial Wire (75 ohm) Bronze Wire REMOTE CONTROL CABLE ANTENNA O Owners Manual 13 Installation 3. Analog and Digital TV signals provided on cable and antenna Antenna Bronze Wire RF Coaxial Wire (75 ohm) Cable TV Wall Jack Turn clockwise to tighten. RF Coaxial Wire (75 ohm) CABLE ANTENNA AC INPUT Bronze Wire To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-

Way Signal Splitter in the connections. If the antenna is not installed properly, contact your deal-

er for assistance. Signal Amplifier ANTENNA VCR Setup VCR Setup

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV

- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. 2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) 3. Select the input source with using the TV/VIDEO button on the remote control. Note that this TV finds the connected input sources automatically for Video, Front Video and Component 1-2. It is presumed that RGB and HDMI/DVI sources are connected. Do not connect to both Video and S-Video at the same time. 14 Plasma TV

) PTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT COMPONENT INPUT 1

(MONO) A/V INPUT S-VIDEO REMOTE CONTROL CABLE ANTENNA AC INPUT 1 2 ANT OUT ANT IN S-VIDEO OUT OUTPUT SWITCH 3 4

(R) AUDIO (L) VIDEO IN VCR Rear External A/V Source Setup A/V Source Setup External How to connect Connect the audio and video cables from the external equip-

ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the TV/VIDEO button on the remote control. Note that this TV finds the connected input sources automatically for Video, Front Video and Component 1-2. It is presumed that RGB and HDMI/DVI sources are connected. 2. Operate the corresponding external equipment. DVD Setup DVD Setup RS-232C INPUT

(CONTROL/SERVICE) Installation RS-232C INPUT

(CONTROL/SERVICE) HDMI 2 HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT S V I D E O R E M O T E C O N T R O L AC INPUT CABLE ANTENNA COMPONENT INPUT 1

(MONO) A/V INPUT Camcorder R AUDIO L VIDEO Video Game Device HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT or VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT COMPONENT INPUT 1

(MONO) A/V INPUT S-VIDEO REMOTE CONTROL CABLE ANTENNA AC INPUT DVD DIGITAL AUDIO OPTICAL

(R) AUDIO (L) B R S-VIDEO

(R) AUDIO (L) or How to connect 1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. Note: If your DVD player does not have component video output, use S-Video. How to use 1. Turn on the DVD player, insert a DVD. 2. Use the TV/VIDEO button on the remote control to select Component 1 or Component 2. (If connected to S-VIDEO, select the Video or Front Video external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the compo-

nent input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PR Pb B-Y Cb PB Pr R-Y Cr PR Notes:

Digital Audio will not work for Component 1 input source. Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time. Owners Manual 15 Installation HDSTB Setup HDSTB Setup

- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i). RS-232C INPUT

(CONTROL/SERVICE) HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT COMPONENT INPUT 1

(MONO) A/V INPUT S-VIDEO REMOTE CONTROL CABLE ANTENNA AC INPUT or or RGB-DTV OUTPUT

(R) AUDIO (L)

(R) AUDIO (L) DIGITAL AUDIO OPTICAL DVI-DTV OUTPUT HDMI-DTV OUTPUT DIGITAL AUDIO OPTICAL

(R) AUDIO (L) B R Digital Set-top Box How to connect Use the TVs COMPONENT (Y, PB, PR) INPUT, RGB or HDMI/DVI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections. How to use 1. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) 2. Use TV/VIDEO on the remote control to select Component 1, Component 2, RGB-DTV, or HDMI/DVI source. Signal 480i 480p 720p 1080i Component 1/2 RGB-DTV , HDMI/DVI Yes Yes Yes Yes No Yes Yes Yes 16 Plasma TV PC Setup PC Setup

- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

- The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic Installation card accordingly.

<When the PC supports DVI>

How to connect 1. Connect the PC to HDMI/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product). 2. If the PC(or the sound card of the PC) has a fiber optic digital audio output connector, connect the PC's audio output to DIGI-

TAL AUDIO(OPTICAL) port for DVI INPUT. 3. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Select HDMI/DVI input source in input source option of SETUP menu.(Refer to P.25) TV/VIDEO button is also available for this purpose. 3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

<When the PC supports RGB>

How to connect 1. Connect the PC to RGB INPUT port of this TV with a RGB cable(not supplied with this product). 2. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60 Hz. 2. Select RGB-PC input source in input source option of SETUP menu.(Refer to P.25) Once you select RGB-PC in main input option of SETUP menu, TV/VIDEO button is also available for this purpose. 3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. Monitor Display Specifications (RGB-PC ) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x400 640x480 31.469 37.927 31.469 37.861 37.500 43.269 70.08 85.03 59.94 72.80 75.00 85.00 800x600 1024x768 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 56.25 60.31 72.18 75.00 85.06 60.00 70.06 75.02 Owners Manual 17 Installation Monitor Display Specifications (HDMI/DVI Mode) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 1024x768 48.363 56.476 60.023 60.00 70.06 75.02 640x480 800x600 31.469 37.861 37.500 35.156 37.879 48.077 46.875 59.94 72.80 75.00 56.25 60.31 72.18 75.00 Monitor Out Setup Monitor Out Setup RGB INPUT AUDIO INPUT DVD

/DTV INPUT VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT COMPONENT INPUT 1

(MONO) A/V INPUT S-VIDEO AC INPUT REMOTE CONTROL CABLE ANTENNA Connect the second TV or monitor to the TVs MONITOR OUTPUT. See the Operating Manual of the second TV or monitor for further details regarding that devices input settings. The TV has a special signal output capability which allows you to hook up a second TV or monitor. Notes:

Component, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sources cannot be used for Monitor out. When connecting with external audio equipments, such as amplif-

ers or speakers, please turn the TV speakers off.(Refer to p.28) We recommend to use the video and audio output jacks for VCR recording. S-VIDEO IN VIDEO

(L) AUDIO (R) Digital Audio Output Audio Output Digital Send the TVs audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio

(Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (opti-

cal) input on the audio equipment. See the external audio equipment instruction manual for operation. Note: When connecting with external audio equipments, such as amplifers or speakers, please turn the TV speakers off.(Refer to p.28) Caution: Do not look into the optical output port. Looking at the laser beam may damage your vision. 18 Plasma TV RS-232C INPUT

(CONTROL/SERVICE) HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT VIDEO COMPONENT INP COMPONENT INP HDMI HDMI Installation

- HDMITM, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing."

- This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI).

- This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolu-

tion.

- When you connect this TV with a source device(DVD player, Set Top Box or PC) supporting Auto HDMI/DVI function, the output resolution of the source device will be automatically set to 1280x720p.

- If the source device does not support Auto HDMI/DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the DVD Player or Set Top Box's output resolution to 1280x720p, and the PC graphics card's output resolution to 1024x768, 60Hz.

- If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connection includes both video and audio.

- If the source device has a DVI output and no HDMI output, a separated audio connection is necessary.

<When the source device(DVD player or Set Top Box) supports HDMI>

How To Connect 1. Connect the source device to HDMI/DVI port of this TV with an HDMI cable(not supplied with this product). 2. No separated audio connection is necessary. How To Use

- If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

- If the source device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280x720p.

- Select HDMI/DVI input source in input source option of SETUP menu.(Refer to P.25) TV/VIDEO button is also available for this purpose.

<When the source device(DVD player or Set Top Box) supports DVI>

How To Connect 1. Connect the source device to HDMI/DVI port of this TV with a HDMI-to-DVI cable(not supplied with this product). 2. A separated audio connection is necessary. 3. If the source device has a fiber optic digital audio output, connect the audio output to DIGITAL AUDIO(OPTICAL) port for DVI INPUT. 4. If the source device has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use

- If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p.

- If the source device does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280x720p.

- Select HDMI/DVI input source in input source option of SETUP menu.(Refer to P.25) TV/VIDEO button is also available for this purpose. Owners Manual 19 Installation Reference Reference Cable sample 20 Plasma TV HDMI Cable

(not supplied with the product) HDMI to DVI Cable

(not supplied with the product) Fiber Optic Digital Audio Cable

(not supplied with the product) Analog Audio Cable(RCA type)

(not supplied with the product) Analog Audio Cable(Stereo to RCA type)

(not supplied with the product) Installation How to use 1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET. 2. Turn on the display by pressing the POWER button on the TV SET and HDMI/DVI Source Devices remote control. 3. Select HDMI/DVI Input source in input source option of SETUP menu.(Refer to P.25) 4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card can not changed, change the PC graphics card or consult the manufacturer of the PC graphics card. Notes:

- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.

- Avoid keeping a fixed image on the TV SET screen for a long period of time. The fixed image may become permanently imprint-

ed on the screen. Use the Orbiter screen saver when possible.

- When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to Screen. As shown the lower picture, press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center.

- When Source Devices connected HDMI/DVI Input output TV SET Resolution(480p, 720p, 1080i), TV SET Display fit EIA/CEA-

861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center.

- In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMI/DVI Input. And In case of, Video Resolution not supported TV SET output in HDMI/DVI Source Devices, "INVALID FORMAT" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact your service center. POSITION G SIZE PHASE RESET Adjust Close F D E G PC mode In This Mode, the Supported TV SET Resolution Specification

- 1920 x 1080 I @ 59.94Hz / 60Hz, 16:9

- 1280 x 720 P @ 59.94Hz / 60Hz, 16:9(preferred format)

- 720 x 480 P @ 59.94Hz / 60Hz, 16:9

- 720 x 480 P @ 59.94Hz / 60Hz, 4:3 In This Mode, the Supported PC Resolution Specification

- 640 x 480 @ 60Hz

- 640 x 480 @ 72Hz

- 640 x 480 @ 75Hz

- 800 x 600 @ 56Hz

- 800 x 600 @ 60Hz

- 800 x 600 @ 72Hz

- 800 x 600 @ 75Hz

- 1024 x 768 @ 60Hz(preferred format)

- 1024 x 768 @ 70Hz

- 1024 x 768 @ 75Hz Owners Manual 21 Operation Operation Operation TTurning the TV On urning the TV On

* In this manual, the OSD (On Screen Display) may be different from your TVs because it is just an example to help you with the TV operation. 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the TV INPUT, TV/VIDEO, CH (D / E), Number (0 ~ 9) button on the remote control.

, TV/VIDEO , CH (D / E) button on the TV or press the POWER, 2. Select the viewing source by using TV/VIDEO button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. 3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. Notes:

If you intend to be away on vacation, disconnect the power plug from the wall power outlet. Without CableCARDTM : Illuminates red in standby mode, Illuminates green when the TV is turned on. Inserting the CableCARDTM : Illuminates orange in standby mode, Illuminates green when the TV is turned on. TV Setup TV Setup On-screen Menus Language Selection On-screen Menus Language Selection

- The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Language. 3. Press the G button and then use D / E button to select your desired language. From this point on, the on-screen menus will be shown in the selected lan-

guage. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 22 Plasma TV Operation Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search)

- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

- Run EZ Scan again after any Antenna/Cable connection changes.

- A password is required to gain access to EZ Scan menu if the Lock System is turned on. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select EZ Scan. 3. Press the ENTER button to begin the channel search. Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE. Manual Scan Manual Scan

- A password is required to gain access to Manual Scan menu if the Lock System is turned on. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Manual Scan. 3. Press the G button and then use D / E button to select TV, DTV, CATV, and CADTV. 4. Press the G button and then use D / E button to select channel number you want to add or delete. 5. Press the ENTER button to add or delete for the channel number. 6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Notes:

This channel number is a physical channel number, which is different from the normal channel number shown in Channel Edit. When inserting the CableCARDTM, CATV, CADTV is not working in Manual Scan. TV: analog antenna(over-the-air) TV signal DTV: digital antenna(over-the-air) TV signal CATV: analog cable TV signal CADTV: digital cable TV signal Owners Manual 23 Operation Setup Menu Options Setup Menu Options Channel Edit Channel Edit

- Create two different types of channel lists in memory: Custom List and Favorite List from the default channel list created from the EZ Scan channel search.

- A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black color, and the channels deleted from the Custom List are displayed in gray color. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen.You can create your own Favorite List. Use the FAV button on the remote control when a channel is highlighted and then you can add or delete the channel to/from the Favorite List. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Channel Edit. 3. Press the G button. You will now see a screen filled with channel numbers and a preview picture. 4. Use D / E / F / G button to select a channel and then use the ENTER button to add or delete it. Press FAV button to add the channel to the Favorite List. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. DTV Signal Strength DTV Signal Strength

- Shows how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation.

- DTV Signal: Only when the input signal is DTV or CADTV, this function is available. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select DTV Signal. 3. View the on-screen signal strength monitor to see the quality of the signal being received. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 24 Plasma TV Operation Channel Label Setup Channel Label Setup

- Choose preset labels for your channels.

If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel -

even if you didn't preset a label for the channel. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Channel Label. 3. Press the G button. You will now see a screen filled with Labels and a preview screen. 4. Use the CH D/E button to select a channel to Label. 5. Use D / E / F / G button to select the appropriate label for the channel, then press ENTER button to set the Label to the selected channel. If you press ENTER button in TV viewing mode, you will see the channel banner. For example:

Input Source Input Source

- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Input Source. 3. Press the G button and then use D / E button to select the source: Antenna, Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-PC), HDMI/DVI. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Note:

To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press G button. Input Label Input Label

- Sets a label to each input source or lets you skip the input source which is not in use when you press TV/VIDEO button. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Input Label. 3. Press the G button and then use D / E button to select the source: Video, Front Video, Component1, Component2, RGB, HDMI/DVI. 4. Press the F / G button to select the label. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Owners Manual 25 Operation VVideo Menu Options ideo Menu Options EZ Picture EZ Picture

- EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category.

- When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ Picture automatically changes to Custom.

- Daylight, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at the factory and are not adjustable. 1. Press the EZ PIC button repeatedly to select the picture appearance setup option as shown below:

Custom (your own settings), Daylight, Normal, Night Time, Movie, Video Game, and Sports. You can also use the VIDEO menu to adjust EZ Picture. 2. Press the EXIT button to save and return to TV viewing or press MENU button to return to the previous menu. Manual Picture Control (Custom option) option) Manual Picture Control (

- Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option

(Contrast, Brightness, Color, Sharpness, or Tint ). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Color TTemperature Control emperature Control Color

- Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Color Temperature . 3. Press the G button and then use D / E button to select either Cool, Medium or Warm. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. VVideo Reset ideo Reset

- Use to quickly reset all the Video menu options to their original factory preset values. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Video Reset . 3. Press the G button to reset the Video menu options to original values. 26 Plasma TV Operation Audio Menu Options Audio Menu Options Audio Language Audio Language

- Other languages may be available if a digital signal is provided by the broad-

casting station. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Audio Language. 3. Press the G button and then use D / E button to select: English, Spanish, or French. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. EZ SoundRite EZ SoundRite

- Scans for changes in sound level during commercials, then adjusts the sound to match the specified audio level. EZ SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select EZ SoundRite. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. EZ Sound EZ Sound

- EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content.

- When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches to Custom.

- Normal, Stadium, News, Music, and Theater are preset for good sound quality at the factory and are not adjustable. 1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below:

Custom (your own settings), Normal, Stadium, News, Music, and Theater. You can also adjust EZ Sound in the AUDIO menu. 2. Press EXIT button to save and return to TV viewing or press MENU button to return to the previous menu. Manual Sound Control (Custom option) option) Manual Sound Control (

- Adjust the sound to suit your taste and room situations. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select the desired sound option

(Balance, Treble, or Bass). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Owners Manual 27 Operation Audio Menu Options Audio Menu Options Front Surround Front Surround

is a trademark of SRS Labs, Inc.

- TruSurround XT technology is incorporated under license from SRS Labs, Inc.

- Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Front Surround. 3. Press the G button and then use D / E button to select Off, 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT.. 3D EchoSound System Creates a stunning simulated stereo effects from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage into stereo sound. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement that produces an immersive sound experience from standard stereo material. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. TV Speakers On/Off Setup f Setup TV Speakers On/Of

- Turn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select TV Speaker. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 28 Plasma TV Operation BBEBBE

- BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select BBE. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Manufactured under license from BBE Sound, Inc. Treble, Bass or BBE arent suitable for SRS TSXT mode. Stereo/SAP Broadcasts Setup Broadcasts Setup Stereo/SAP

- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program;

if the station transmits an additional sound signal as well as the original one.

- When having selected Stereo or SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals.

- Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.

- Select Mono if you want to listen to mono sound during stereo/SAP broadcasting.

- Stereo or SAP can be received in a Analog channel. 1. Use the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn. If other languages are available on the digital signal, select them with the SAP button. 2. Press EXIT button to save and return to TV viewing. Owners Manual 29 Operation TTime Menu Options ime Menu Options Auto Clock Setup Auto Clock Setup

- The time is set automatically from a digital channel signal.

- The digital channel signal includes information for the current time provided by the broadcasting station.

- Set the clock manually, if the current time is set incorrectly by the auto clock function. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Clock. 3. Press the G button and then use D / E button to select On or Off. 4. Press the G button and then use D / E button to select your viewing area time zone: Eastern, Central, Mountain, Pacific, Alaska, or Hawaii. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Manual Clock Setup Manual Clock Setup If current time setting is wrong, reset the clock manually.

- When you set up TV guide on screen system, Manual Clock menu is not selected. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Manual Clock. 3. Press the G button and then use F / G button to select either the year, date, or time option. Once selected, use the D / E button to set the year, date, and time options. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. On/Off f TTimer Setup imer Setup On/Of

- Timer function operates only if the current time has been set.

- Off-Timer function overrides On-Timer function if they are both set to the same time.

- The TV must be in standby mode for the On-Timer to work.

If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Off Timer or On Timer. 3. Press the G button and then use D / E button to select On. To cancel On/Off timer function, select Off. 4. Press the G button and then use D / E button to set the hour. 5. Press the G button and then use D / E button to set the minutes. 6. For only On timer function Press the G button and then use D / E button to select the channel at turn-on. Press the G button and then use D / E button to set the sound level at turn-on. 7. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 30 Plasma TV Operation Sleep TTimer imer Sleep

- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.

- You can also set up the Sleep Timer in the TIME menu. 1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected. 3. To check the remaining minutes before the TV turns off, press the TIMER button once. 4. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off. Auto Offf Auto Of

If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Owners Manual 31 Operation Option Menu Features Option Menu Features Aspect Ratio Control Aspect Ratio Control

- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-

played. If you are viewing a picture with a 16:9 aspect ratio, you cant use the Horizon aspect ratio option.

- Horizon aspect ratio is not available for Component 1-2(480p/720p/1080i)/RGB-DTV (480p/720p/1080i)/HDMI/DVI-DTV (720p/1080i)

/DTV(720p/1080i) input source. In RGB-PC/DVI-PC input source, only use 4:3 or 16:9 aspect ratio are available.

- Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visi-

ble. 1. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the OPTION menu. Set By Program Select the proper picture proportion to match the sources image. (4:3 4:3, 16:9 16:9) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. 16:9 Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Horizon Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view. Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture tak-

ing a halfway trade off between alteration and screen coverage. Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture size, the image may become distorted. You can adjust the enlarge proportion of Cinema Zoom using D / E button. The adjustment range is 1~16. Cinema 3:2 Mode Setup

- Most movies are 24 frames/sec, but TV signal is 30 frames/sec. This option lets the TV do 3:2 pull-down operation for you to watch movies at the best motion appearance. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Cinema 3:2 Mode. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Note: This feature operates only in Component 480i, S-Video, Video mode. 32 Plasma TV Operation Caption Caption 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Caption/Textext Caption/T Analog Broadcasting System Captions

- Select a caption mode for displaying captioning information if provided on a program.

- Analog caption displays information at any position on the screen.

- Text displays information, usually at the bottom position and is used for a data service.

- Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.

- This TV is programmed to memorize the caption/text mode which was last set to, when you turn the power off. 1. Use the CC button repeatedly to select Caption CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. EZ Mute shows the selected captions option (if available on program) when the TV sound is muted 2. Press EXIT button to save and return to TV viewing. You can also use the OPTION menu to select Caption/Text. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption/Text. 3. Press the G button and then use D / E button to select caption: CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Digital Broadcasting System Captions

- Choose the language you want the DTV/CADTV Captions to appear in.

- Languages can be chosen for digital sources only if they are included on the program. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption/Text. 3. Press the G button and then use D / E button to select available caption lan-

guages: English, Spanish, or French. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio VIDEO AUDIO Cinema 3:2 Mode Caption Caption / Text G Caption Option TIME Language OPTION ISM Method Low Power LOCK MENU Previous English Spanish French Owners Manual 33 Operation Option Menu Features Option Menu Features Caption Option Caption Option

- Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Option. 3. Press the G button and then use F / G button to select Custom. 4. Use D / E button to customize the Style, Font, etc., to your preference. A pre-

view icon is provided at the bottom of the screen, use it to see the caption language. Size: Set the size of the words. Font: Select a typeface for the words. Text Color: Choose a color for the text. Text Opacity: Specify the opacity for the text color. Bg (Background) Color: Select a background color. Bg (Background) Opacity: Select the opacity for the background color. Edge Type: Select an edge type. Edge Color: Select a color for the edges. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. ISM (Image Sticking Minimization) Method ISM (Image Sticking Minimization) Method

- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining; even though the image is changed. Use our unique method to minimize any fixed image on the screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select ISM Method. 3. Press the G button and then use D / E button to select either Normal, White Wash, Orbiter or Inversion. Normal If image sticking is never a problem, ISM is not necessary - set to Normal. White wash White Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move once per 2 minutes: Left Right Upside Downside Right Left Downside Upside. Inversion Inversion will automatically invert the plasma display panel color every 30 minutes. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 34 Plasma TV Low Power Low Power

- Low power reduces the plasma display power consumption. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Low Power. 3. Press the G button and then use D / E button to select On or Off. When you select On, the screen darkens. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Operation Owners Manual 35 Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the cat-

egories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :

1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Movies previously shown in theaters:

Movie Ratings :

Blocking Off G PG PG-13 R NC-17 X If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.

(Permits all programs)

(General audience)

(Parental guidance suggested)

(Parents strongly cautioned)

(Restricted)

(No one 17 and under admitted)

(Adult only) Ratings for Television programs including made-for-TV movies :

(General audience)

(Parental guidance suggested)

(Parents strongly cautioned)

(Mature audience only)

(All children)

(Children 7 years older) TV-G TV-PG TV-14 TV-MA TV-Y TV-Y7 TV Rating Children:

Age Fantasy Violence TV Rating General:

Age Dialogue - sexual dialogue Language - adult language Sex - sexual situations Violence Input Block Video, Front Video Component 1, 2 RGB, HDMI/DVI

(On, Off)

(On, Off)

(On, Off)

(applies to TV-Y, TV-Y7)

(applies to TV-Y7)

(applies to TV-G, TV-PG, TV-14, TV-MA)

(applies to TV-PG, TV-14)

(applies to TV-PG, TV-14, TV-MA)

(applies to TV-PG, TV-14, TV-MA)

(applies to TV-PG, TV-14, TV-MA) 36 Plasma TV Parental Lock Setup Parental Lock Setup

- Set up blocking schemes to block specific channels, ratings, and external viewing sources.

- A password is required to gain access to this menu. 1. Press the MENU button and then use D / E button to select the LOCK menu. Then, press the G button The TV is set up with the initial password 0-0-0-0. 2. Use the D / E button to choose from the following Lock Menu options. Once the option is selected, change the settings to your preference. Lock System: Enables or disables the blocking scheme you set up previ-

ously. Set Password: Change the password by inputting a new password twice. Block Channel: Blocks any channels that you do not want to watch or that you do not want your children to watch. Movie Rating (MPAA): Blocks movies according to the movie ratings lim-

its specified, so children cannot view certain movies. You can set the rat-

ings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. TV Rating-Children: Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intend-

ed for mature audiences in the TV Rating - sub menu, your children can view those programs. TV Rating-General: Based on the ratings, blocks certain TV programs that you and your family do not want to view. Input Block: Enables you to select a source to block from the external source devices you have hooked up. 3. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Note:

If you ever forget your password, key in 7, 7, 7, 7 on the remote control. Operation Owners Manual 37 Operation Remote Control Remote Control EPG (Electronic Program Guide)

(In DTV mode)

- This system has an Electronic Program Guide (EPG) to help your navigation through all the possible viewing options.

- The EPG supplies information such as program listings, start and end times for all available services.

- This function can be used only when the EPG information is broadcasted by broadcasting companies.

- The EPG displays the program description for next 7 days.

- This function is only supported in DTV mode. 1. Press the GUIDE button to switch on EPG. 2. Press the D / E / F / G button to select desired program, then press the ENTER button to display the selected program. 3. Press the GUIDE or EXIT button again to switch off EPG and return to TV viewing. 38 Plasma TV Operation Brief Info.

- Brief Info shows the present screen information.

- Press the INFO button to show the Brief Info on the screen.

- INFO button does not work in Component1, Component2, RGB, and HDMI/DVI modes.

- Press the INFO button or EXIT button to exit. Operation: Watching TV/DTV/CATV/CADTV Watching Video, Front Video In Component1, Component2, RGB, HDMI/DVI modes, INFO button is not working. Function: Show the present screen information. On Watching with the upper Input signal, press the INFO button. Press the INFO button or EXIT button to exit. A: Banner information B: Program title C: Day of week, Month, Year D: Program start time E: Program progress bar F: Program finish time G: Present time H: Additional information. Refer to the icon explanation on the right. 4 : 3 16 : 9 The original aspect ratio of the video is 4:3 The original aspect ratio of the video is 16:9(wide) 480i 480p 720p 1080i The video resolution is 720x480i The video resolution is 720x480p The video resolution is 1280x720p The video resolution is 1920x1080i Multilingual : The program contains two or more audio services. Press the SAP button to select wanted Audio. Caption: => The program contains one or more cap-

tion services. Press the CC button to select wanted Closed caption. CC The program contains V-Chip information. Refer to the

<LOCK Menu>. D (Dialogue), L (Language), S (Sex), V (Violence), FV

(Fantasy Violence) B C D E F G A H Owners Manual 39 Operation EZ Mute

- Nothing to do with Caption on/Off using MUTE button, the mode selected Caption/Text is to be displayed.

- When you repeatedly press the MUTE button, the sound mode is changed in turn. (Refer to the picture below) Mute EZ Mute Mute : Sound is muted. EZ Mute : a special mute mode to activate the closed caption, auto-

matically. 24 Mute Off : Sound is enabled. Note: EZ Mute does not operate in Component/RGB/HDMI/DVI modes. Freeze & Magnify (DTV/CADTV 720p, or 1080i mode only)

- Enlarges the picture with correct proportions.

- When enlarging the picture, the image may become distorted. 1. Press the FREEZE button in 720p or 1080i mode. 2. Use the D / E / F / G buttons to select the screen section to be magnified. 3. To return to normal viewing, press the FREEZE button again. Note : The Magnify feature is available only in 720p or 1080i mode, but the FREEZE button works in all video formats. F F F F 40 Plasma TV Screen Setup for PC mode Operation Operation When RGB connect to PC input and select the RGB-PC, this function is used. When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used. In RGB-DTV mode, SIZE and PHASE is not available. Adjustment for screen Position, Size, Phase, Reset Adjustment for screen Position, Size, Phase, Reset After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.

- Display PC Adjust Menu using ADJUST button.

- Position : Adjust the screen position. After displaying the Adjust, select the screen position.

- Size : Adjust the screen size.

- Phase : Adjust the phase of Pixel clock. In HDMI/DVI-PC mode, PHASE is not available.

- Reset : Initializating Position, Size, Phase adjustment . Operation Owners Manual 41 Operation APM (Adaptive Picture Mode)

- Allows a viewer to select their preferred picture mode after compairing the four different picture (Daylight, Normal, Night Time

-and Custom) settings. 1. Press the APM button at once. As shown below, the screen is divided to 4-split. 2. Use the D / E / F / G button to navigate 4 EZ Pictures. 3. By pressing the ENTER button, you can select the desired mode. 4. Press EXIT button to return to TV viewing. Notes:

While operating the 4-split, any button except APM, ENTER, EXIT, VOLUME D / E , MUTE button on the remote control are not available. If you don't press any button for 30 seconds, APM screen is disappeared, automatically. 42 Plasma TV External Control Device Setup External Control Device Setup External Control Device Setup

- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitors functions externally.

- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.

- RS-232C connection cables are not supplied with the Monitor. RS-232C Setup RS-232C Setup RS-232C INPUT

(CONTROL/SERVICE) Cable HDMI /DVI OUTPUT COMPONENT2 INPUT DVI INPUT VIDEO AUDIO VIDEO AUDIO L R L R COMPONENT INPUT 2 MONITOR OUTPUT DIGITAL AUDIO (OPTICAL) RGB INPUT AUDIO INPUT DVD

/DTV INPUT COMPONENT INPUT 1

(MONO) A/V INPUT S-VIDEO REMOTE CONTROL CABL PC TType of Connector; D-Sub 9-Pin Male ype of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection RS-232C Configurations RS-232C Configurations 1 5 9 6 7-Wire Configurations

(Standard RS-232C cable) 3-Wire Configurations

(Not standard) PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 4 6 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Owners Manual 43 External Control Device Setup Set ID Set ID Use this function to specify a monitor ID number. Refer to Real Data Mapping. See page 45. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select SET ID. 3. Press the G button and then use D / E button to adjust SET ID to choose the desired monitor ID number. The adjustment range of SET ID is 1 ~ 99. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Communication Parameters Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None

* Use a crossed (reverse) cable. Stop bit : 1 bit Communication code : ASCII code Command Reference List Command Reference List COMMAND 1 COMMAND 2 DATA

(Hexadecimal) k 01. Power k 02. Input Select k 03. Aspect Ratio k 04. Screen Mute k 05. Volume Mute k 06. Volume Control k 07. Contrast k 08. Brightness k 09. Color k 10. Tint k 11. Sharpness k 12. OSD Select 13. Remote Control Lock Mode k k 14. Treble k 15. Bass k 16. Balance 17. Color Temperature k j 18. ISM Method j 19. Low Power j 20. Orbiter Time Setting 21. Orbiter Pixel Setting j a b c d e f g h i j k l m r s t u p q r s 0 ~ 1 0 ~ 8

0 ~ 1 0 ~ 2 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 2

0 ~ 1 1 ~ FE 1 ~3 TTransmission / Receiving Protocol ransmission / Receiving Protocol Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

* [Command 1]: First command to control the set.(j,k,m or x)

* [Command 2]: Second command to control the set.

* [Set ID]: You can adjust the set ID to choose desired monitor ID number in Setup menu. Adjustment range is 1

~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal

(1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol.

* [DATA]: To transmit command data. Transmit FF data to read status of command.

* [Cr]: Carriage Return ASCII code 0x0D

* [ ]: ASCII code space (0x20) OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

* The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

* The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: Not supported function 3: Wait more time COM-

MAND 1 COM-

MAND 2 DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5

(Hexadecimal)

(Hexadecimal)

(Hexadecimal) a physical/program high major/program low major low minor high minor low attribute b 00 ~ 01 c key code

(Hexadecimal)

(Hexadecimal)

(Hexadecimal) 22. Channel Tuning m 23. Channel Add/Del m 24. Key m 25. Input Select x b

44 Plasma TV 01. Power (Command2:a) G To control Power On/Off of the Monitor. Transmission

[k][a][ ][Set ID][ ][Data][Cr]

Data 0 : Power Off Acknowledgement

[a][ ][Set ID][ ][OK][Data][x]

1 : Power On

* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function. 02. Input Select (Command2:b) (Main Picture Input) G To select input source for the Monitor. Transmission

[k][b][ ][Set ID][ ][Data][Cr]

Data 0: DTV 1: Analog 2: Video 3: Front Video 4: Component 1 Acknowledgement

[b][ ][Set ID][ ][OK][Data][x]

5: Component 2 6: RGB-DTV 7: RGB-PC 8: HDMI/DVI 03. Aspect Ratio (Command2:c) (Main picture format) G To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Option menu. Transmission

[k][c][ ][Set ID][ ][Data][Cr]

Date 1: 4:3 2: 16:9 3: Horizon 4: Zoom 1 5: Zoom 2 Acknowledgement

[c][ ][Set ID][ ][OK][Data][x]

6: Set by program 10: Cinema Zoom (1) 1F: Cinema Zoom (16) 04. Screen Mute (Command2:d) G To select screen mute on/off. Transmission

[k][d][ ][Set ID][ ][Data][Cr]

Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement

[d][ ][Set ID][ ][OK][Data][x]

External Control Device Setup 05. Volume Mute (Command2:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission

[k][e][ ][Set ID][ ][Data][Cr]

Data 0 : Volume mute off (Volume on) 1 : Volume mute on (Volume off) 2 : EZ Mute Acknowledgement

[e][ ][Set ID][ ][OK][Data][x]

06. Volume Control (Command2:f) G To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission

[k][f][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement

[f][ ][Set ID][ ][OK][Data][x]

07. Contrast (Command2:g) G To adjust screen contrast. You can also adjust contrast in the Video menu. Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement

[g][ ][Set ID][ ][OK][Data][x]

08. Brightness (Command2:h) G To adjust screen brightness. You can also adjust brightness in the Video menu. Transmission

[k][h][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement

[h][ ][Set ID][ ][OK][Data][x]

* Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 Owners Manual 45 External Control Device Setup 09. Color (Command2:i) G To adjust the screen color. You can also adjust color in the Video menu. Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64 Refer to Real data mapping. See page 45. Acknowledgement

[i][ ][Set ID][ ][OK][Data][x]

10. Tint (Command2:j) G To adjust the screen tint. You can also adjust tint in the Video menu. Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Red : 0 ~ Green : 64 Refer to Real data mapping. See page 45. Acknowledgement

[ j ][ ][Set ID][ ][OK][Data][x]

13. Remote Control Lock Mode (Command2:m) G To lock the remote control and the front panel controls on the set. Transmission

[k][m][ ][Set ID][ ][Data][Cr]

Data 0: Lock off Acknowledgement

[m][ ][Set ID][ ][OK][Data][x]

1: Lock on 14. Treble (Command2:r) G To adjust treble. You can also adjust treble in the Audio menu. Transmission

[k][r][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 45. Acknowledgement

[r][ ][Set ID][ ][OK][Data][x]

11. Sharpness (Command2:k) G To adjust the screen sharpness. You can also adjust sharpness in the Video menu. Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 45. Acknowledgement

[k][ ][Set ID][ ][OK][Data][x]

15. Bass (Command2:s) G To adjust bass. You can also adjust bass in the Audio menu. Transmission

[k][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 45. Acknowledgement

[s][ ][Set ID][ ][OK][Data][x]

12. OSD Select (Command2:l) G To select OSD (On Screen Display) on/off. Transmission

[k][l][ ][Set ID][ ][Data][Cr]

Data 0: OSD off 1: OSD on Acknowledgement

[l][ ][Set ID][ ][OK][Data][x]

16. Balance (Command2:t) G To adjust balance. You can also adjust balance in the Audio menu. Transmission

[k][t][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 45. Acknowledgement

[t][ ][Set ID][ ][OK][Data][x]

46 Plasma TV External Control Device Setup 17. Color Temperature (Command2:u) G To adjust color temperature. You can also adjust color temperature in the Video menu. Transmission

[k][u][ ][Set ID][ ][Data][Cr]

Data 0: Medium 1: Cool 2: Warm Acknowledgement

[u][ ][Set ID][ ][OK][Data][x]

21. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission

[ j ][s][ ][Set ID][ ][Data][Cr]

Data Min: 1 ~ Max: 3 Acknowledgement

[s][ ][Set ID][ ][OK][Data][x]

18. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission

[ j ][p][ ][Set ID][ ][Data][Cr]

Data 1: Inversion 2: Orbiter 4: White Wash 8: Normal Acknowledgement

[p][ ][Set ID][ ][OK][Data][x]

19. Low Power (Command2:q) G To control the Low Power function on/off. You can also adjust Low Power in Option menu. Transmission

[ j ][q][ ][Set ID][ ][Data][Cr]

Data 0: Low Power off 1: Low Power on Acknowledgement

[q][ ][Set ID][ ][OK][Data][x]

20. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission

[ j ][r][ ][Set ID][ ][Data][Cr]

Data Min: 1 ~ Max: FE Acknowledgement

[r][ ][Set ID][ ][OK][Data][x]

22. Tune Command (Command: m a) G To tune channel to following physical/major/minor number Transmission

[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]

Data 0: Physical Channel Number(Transmit by Hexadecimal code) NTSC air:02~45 NTSC cable: 01, 0E~7D ATSC air:01~45 ATSC cable:01~87 Data 1,Data 2: Major Channel Number (two part)/ Channel Number (One part) Data1: High byte Data2: Low byte Two part channel number: Major number-Minor number One part channel number: If the channel band is ATSC digital cable, it can be used. In case of using one part chan nel number, minor channel does not need. Data 3, Data 4: Minor Channel Number(Data 3: High byte)(Data 4: Low byte) Data 5:

Main/Sub Picture Main Sub 6 0 1 7 0 1 Two/One Part Channel Two One Using Physical Channel Use No Use 5 0 1 Reserv 4 ed x x x x x x x x x x 3 2 1 0 Step 0 0 0 0 0 0 0 0 x 1 0 0 0 0 1 1 1 1 x 1 0 0 1 1 0 0 1 1 x 1 0 1 0 1 0 1 0 1 x 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved

... Reserved Owners Manual 47 25. Input select(Command: x b) (Main Picture Input) G To select input source for TV. Transmission

[x][b][][Set ID][][Data][Cr]

Data Structure DATA(Hex) INPUT 00 01 10 11 20 21 40 41 50 60 90 DTV (Antenna) DTV (Cable) Analog (Antenna) Analog (Cable) Video Front Video Component 1 Component 2 RGB DTV RGB PC HDMI/DVI Acknowledgement

[b][ ][Set ID][ ][OK/NG][Data][x]

External Control Device Setup

* All data are transmitted by Hexadecimal code

*Two/One part Channel: 6th bit This bit is used in a cable-ready system.

*Using physical channel: 5th bit If the channel band is NTSC air or NTSC cable, channel tun-

ing can be done by only physical channel. In this case, using physical channel bit must be low(0). But if the channel band is ATSC air or ATSC cable, there are two cases that physical channel enable or disable. If the physical channel sending is meaningful, you should set this bit low(0). If the physical channel sending is meaningless, you should set this bit high(1). Example) 1. Analog channel: NTSC cable, channel number(35), main picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01):

main picture, two part(its not mandatory), using physical chan-

nel, NTSC cable xx data: dont care major and minor channel number in case analog channel tuning. 2. Digital channel: ATSC air, channel number(dont know phys-

ical channel, major(30), minor(3)), sub picture Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub pic-

ture, two part, not using physical channel, ATSC air xx data:

dont care analog channel number in case digital channel tun-

ing. 3. Digital channel: ATSC air, channel number(physical(20),major(20), minor(3)), sub picture Command: ma 00 14 00 14 00 03 82 attribute(0x82): sub pic-

ture, two part, using physical channel, ATSC air. Acknowledgement

[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][Data5][x]

[a][ ][Set ID][ ][NG][Data0][x]

23. Channel Add/Del (Command: m b) G To add and delete the channels Transmission

[m][b][ ][Set ID][ ][Data][Cr]

Data 0: Channel Delete 1: Channel Add Acknowledgement

[b][ ][Set ID][ ][OK][Data][x]

[b][ ][Set ID][ ][NG][Data][x]

24. Key (Command: m c) G To send IR remote key code Transmission

[m][c][ ][Set ID][ ][Data][ ][Cr]

Data Key code: Refer to page 50. Acknowledgement

[c][ ][Set ID][ ][OK][Data][x]

48 Plasma TV IR Codes IR Codes IR Codes How to Connect How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Remote Control IR Codes G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz TC T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 G Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame G Lead code Repeat code Tf 9 ms 4.5 ms G Repeat code 0.55 ms G Bit description Bit 0 9 ms 0.56 ms 1.12 ms 2.25 ms Bit 1 G Frame interval : Tf The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz 0.56 ms 2.24 ms Owners Manual 49 Code (Hexa) Function Note 0B 0F 08 C4 C5 79 0E 10 ~ 19 4C 1A 09 65 02 03 00 01 1E AA 39 40 41 07 06 44 43 52 4D 5B 65 0A CB D6 5A D0 BF D4 D5 D7 C6 76 77 AF 92 TV/VIDEO TV INPUT POWER POWER ON POWER OFF RATIO TIMER Number Key 0~ 9

- (Dash) FLASHBK MUTE FREEZE VOL D VOLE CH D CH E FAV INFO CC D E F G ENTER MENU EZ SOUND EZ PIC EXIT FREEZE SAP ADJUST TV VIDEO Front Video COMPONENT 1 COMPONENT 2 RGB-PC RGB-DTV HDMI/DVI Ratio 4:3 Ratio 16:9 Ratio Zoom APM R/C Button R/C Button R/C Button (Power On/Off) Discrete IR Code (Only Power On) Discrete IR Code (Only Power Off) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code (TV Input Selection) Discrete IR Code (Video Input Selection) Discrete IR Code (Front Video Input Selection) Discrete IR Code (Component1 Input Selection) Discrete IR Code (Component2 Input Selection) Discrete IR Code (RGB-PC Input Selection) Discrete IR Code (RGB-DTV Input Selection) Discrete IR Code (HDMI/DVI Input Selection) Discrete IR Code (Only 4:3 Mode) Discrete IR Code (Only 16:9 Mode) Discrete IR Code (Only Zoom1 Mode) R/C Button IR Codes 50 Plasma TV Programming the Remote Programming the Remote Programming the Remote G The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode 1. To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the corresponding mode button on the remote. After that, press the POWER button. If the device is turned off then it responds properly and the remote need not to be pro-

grammed. If not, the remote should be programmed to operate the device. The programming procedures are explained below. 2. Press the MENU and MUTE button continuously at the same time for 2 seconds, the current selected device button will be illu-

minated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. 3. Enter code numbers using the number button on the remote by refering the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. 4. Press the MENU button to store the code. After blinking twice, this code is stored. 5. Test the remote functions to see if the device responds properly. If not, repeat from step 2. Owners Manual 51 Programming Codes Programming Codes Programming Codes VCRs VCRs Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO Codes 034 016 043 046 124 125 146 072 031 033 103 012 023 039 043 035 037 129 028 031 033 108 003 040 135 031 033 041 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE 004 018 026 034 043 063 137 150 031 033 031 033 012 013 015 033 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 Brand TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Codes 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 040 012 048 012 034 046 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 Brand KENWOOD LG (GOLDSTAR) LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER Codes 014 034 039 043 047 048 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 Brand PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY Codes 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 Codes 003 004 039 042 046 052 053 112 014 005 007 014 024 026 092 007 007 065 090 080 081 019 030 023 020 030 040 057 062 066 032 072 008 022 025 054 052 074 Brand GOLDEN CHANNEL HAMLIN HITACHI HOSPITALITY JERROLD LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC OAK PANASONIC PARAGON PHILIPS Codes 030 049 050 055 052 055 070 077 002 003 004 008 009 010 052 069 074 001 106 101 005 037 033 010 012 064 079 100 028 032 015 028 038 071 073 016 031 037 053 044 047 100 006 012 013 020 Brand PIONEER Codes 065 085 090 034 051 052 063 076 POST NEWS WEEK 016 059 PRUCER 011 048 071 072 PTS 073 074 100 047 049 050 057 025 102 107 030 068 003 011 041 042 043 045 046 022 030 052 030 PULSAR RCA REGAL REGENCY REMBRANT SAMSUNG SCIENTIFIC ATLANTA SHERITECH SIGNAL SIGNATURE SL MARX Brand SPRUCER STARCOM STARGATE TADIRAN TAEKWANG TAIHAN TANDY TEXSCAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH Codes 047 078 002 004 008 009 008 030 030 110 105 017 029 039 040 056 100 007 014 024 004 053 005 007 014 024 026 027 032 035 012 015 018 086 087 088 089 100 114 060 093 INSTANTREPLAY JCL JCPENNY JENSEN JVC CACATVTV Brand ABC AJIN ANTRONIK ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD GE GEMINI GI 52 Plasma TV HDSTB HDSTB Brand Codes Brand ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER 013 014 015 018 123 050 051 126 129 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME EUROPLUS FUJITSU 036 055 008 009 012 077 054 050 145 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 089 114 017 021 022 027 Codes 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI HOUSTON TRACKER HUGHES JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM MEMOREX NEXTWAVE NORSAT 031 059 101 139 140 033 037 039 051 057 104 068 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 Programming Codes Brand Codes Brand Codes TOSHIBA UNIDEN VIEWSTAR WINEGARD ZENITH 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 PACE SKY SATELLITE 143 060 142 PANASONIC 121 PANSAT PERSONAL CABLE 117 071 PHILIPS 105 PICO 019 102 PRESIDENT 030 110 111 PRIMESTAR 072 PROSAT RCA 066 106 043 074 REALISTIC SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057 SCIENTIFIC ATLANTA SONY STARCAST SUPER GUIDE TEECOM 085 032 138 103 041 020 124 125 023 026 075 087 Audio Audio Brand AIWA AKAI ANAM BURMECTER CARVER CLARION DAEWOO DENON FANTASIA FINEARTS FISHER LG(GOLDSTAR) HAITAI HARMAN/KARDON 068 INKEL Codes 014 028 070 096 125 129 139 229 230 163 003 014 017 023 059 106 189 216 217 235 236 252 086 199 027 053 060 084 102 148 198 221 015 075 130 143 071 022 089 099 001 021 024 029 087 107 108 110 190 191 192 210 211 212 239 034 035 188 222 037 058 062 069 078 079 095 121 122 149 150 151 152 153 154 155 157 158 159 160 189 207 222 224 225 226 227 243 247 Brand JVC KEC KENWOOD KOHEL NAD LOTTE LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX NAD ONKYO OPTIMUS PANASONIC PENNEY Codes 004 013 141 185 186 187 038 050 067 089 170 171 197 206 215 222 030 045 046 014 016 036 098 100 172 173 174 175 176 177 178 179 180 181 183 201 202 208 213 214 219 223 232 238 240 103 111 002 018 020 025 034 041 081 090 097 112 049 104 107 046 013 040 041 047 048 056 057 132 133 140 158 007 033 064 113 142 220 241 251 104 Brand PHILIPS PIONEER QUASAR RCA RCX REALISTIC SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SONY TAEKWANG TEAC TECHNICS Codes Brand Codes TOSHIBA THE VICTOR WARDS YAMAHA 147 218 137 061 088 131 089 054 055 066 092 199 026 112 143 039 042 043 063 065 091 093 094 115 123 127 250 113 080 092 103 106 124 145 146 182 193 194 195 203 204 244 245 246 011 135 138 144 019 083 234 106 186 031 032 051 052 072 082 117 119 156 184 199 200 206 209 005 006 158 044 045 109 114 118 126 248 249 012 020 073 074 076 077 105 161 162 163 164 165 166 167 168 169 205 231 233 242 010 085 106 136 185 187 237 101 113 128 134 DVDDVD Brand Codes 022 020 014 005 006 APEX DIGITAL DENON GE HARMAN KARDON 027 012 JVC LG 001 010 016 025 Brand MAGNAVOX MARANTZ MITSUBISHI NAD ONKYO PANASONIC Codes 013 024 002 023 008 017 003 009 Brand PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG Codes 013 004 026 021 005 006 005 006 011 015 Brand SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 007 005 006 019 008 009 018 010 016 025 Owners Manual 53 Troubleshooting Checklist TTroubleshooting Checklist roubleshooting Checklist Check whether the TV is turned on. Is the power cord inserted into wall power outlet?

No picture &

No sound Test the wall power outlet, plug another products power cord into the outlet where the TVs power cord was plugged in. Picture OK &

No sound Press the VOLUME (D / E) button. Sound muted? Press MUTE button. Check to see if there is any object between the TV and the remote control causing obstruction. The remote control doesnt work Are batteries installed with correct polarity (+ to +, - to -)?

(Refer to p.9) Correct remote operating mode set: TV, VCR etc.?

Install new batteries. (Refer to p.9) Picture appears slowly after switching on This is normal, the image is muted during the TV startup process. Please contact your service center, if the picture has not appeared after five minutes. Select Color in the Video menu and press the G button.

(Refer to p.26) Keep a sufficient distance between the TV and the VCR. No or poor color or poor picture Activate any function to restore the brightness of the picture.

(If still picture is on the screen for more than 5 minutes, the screen gets dark.) Horizontal/vertical bars or picture shaking Check for local interference such as an electrical appliance or power tool. No output from one of the speakers Adjust Balance in the AUDIO menu. (Refer to p.27) Unusual sound from inside the TV A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does not indicate a fault with the TV. 54 Plasma TV Maintenance Maintenance Maintenance

- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1. Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence Absence Extended If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Owners Manual 55 Specification Product Specifications Product Specifications MODELS Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Resolution Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Range Operating Humidity Range 42PX3DCV-UC 47.6 / 1210 27.6 / 701 11.6 / 295 79 / 35.9 852 x 480 (Dot) AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69 75 32 ~ 104F (0 ~ 40C) Less than 80%

The specifications shown above may be changed without prior notice for quality improvement. 56 Plasma TV Notes Notes Owners Manual 57 Notes Notes 58 Plasma TV LG ELECTRONICS, INC. PLASMA TV U.S. LIMITED WARRANTY Your LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty, at LGEs option, if it proves to be defective in material or workmanship under normal use, during the warranty period (Warranty Period) listed below, effective from the date (Date of Purchase) of original consumer purchase of the product. This war-

ranty is good only to the original purchaser of the product and effective only when used in the United States, includ-

ing Alaska, Hawaii, and U.S. Territories. WARRANTY PERIOD:

HOW SERVICE IS HANDLED:

LABOR and PARTS: 2 YEARS from the Date of Purchase. Your unit will be repaired or replaced with a new, substitute model or factory reconditioned unit, at LGEs option. If repaired, parts used in the repair may be new or remanufac-

tured. Replacement Units and Repair Parts are warranted for the remaining portion of the original units warranty period. EFFECTIVE DATE OF WARRANTY: Your warranty period begins on the date of sale to the original consumer/end user. KEEP THE DEALERS DATED BILL OF SALE OR PROOF OF DELIVERY as evidence of the purchase date. You will be required to submit a legible copy of your bill of sale or proof of delivery when requesting warranty service. In-Home Service: Please retain dealers dated bill of sale or delivery ticket as evidence of the Date of Purchase for proof of warranty, and submit a copy of the bill of sale to the ser-

vice person at the time warranty service is pro-

vided. Please call 1-800-243-0000 to locate your nearest LGE Authorized Service Center. Visit our website at:

http://www.lgservice.com THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. CONCERNING PIXEL FUNCTIONALITY: Your Plasma TV contains about one million individual pixels. Plasma TV typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with manufacturers specifications, indicating that any pixel defects do not effect the operation or use of your display. IMPORTANT: Please fill out and mail in your Product Registration Card or go to www.lgservice.com to register your product online. This information will allow us to reach you promptly should we discover a safety or reliability prob-

lem that could affect you. THIS LIMITED WARRANTY DOES NOT APPLY TO:

G damage caused in shipping or transit G service required as a result of improper installation, including incorrect or insufficient AC supply (please consult the owners manual for power supply requirements) G installation or repair of antenna systems, cable con-

verters, cable company supplied equipment, or other components in a video system gence, improper maintenance or storage, or to acts of nature or other causes beyond our control.

(Causes beyond our control include but are not lim-

ited to lightning strike, power surges, power out-

ages and water damage.) G image burn-in G repair or replacement of warranted parts by other than LGE authorized service centers. G set-up or adjustment on consumer controls, or G units purchased or serviced outside of the coverage damage caused by improper adjustments area. G damage caused by other system components G any panel that has been modified or incorporated into any other product G replacement of batteries on the remote control. G damage (including cosmetic damage), failure, loss or personal injury due to misuse, abuse, negli-

G product where the original factory serial numbers have been removed, defaced or changed in any way. G product sold and labeled as as is, where is or sim-

ilar disclaimer. The cost of repair or replacement under these excluded circumstances shall be borne by the consumer. CUSTOMER INTERACTIVE CENTER NUMBERS:

To obtain customer assistance, product information or Dealer or Service locations Call 1-800-243-0000 24 hours a day, 365 days per year FOR SERVICE:

Before you call for warranty service, check your operating guide you may avoid a service call. For warranty service information, please contact the LGE Customer Interactive Center telephone number. When calling for service, please have your product model number, serial number and the date of pur-

chase or the date of original installation available. If a replacement unit is required, under some circumstances you may be asked to provide a reserve deposit to the LGE Service Center against a credit card number as surety for advanced shipment. Your credit card will not be charged if you return the defective unit within 10 working days. If a replacement unit is received, please use the carton and packaging from that unit in returning the defective unit to the LGBrand Service Center. Parts and service in accordance with the LGE warranty are LGEs responsibility and will be provided without charge. Other service requirements will be at the owners expense. If you have problems in obtaining satisfactory warranty service, write or call the LGE Customer Interactive Center. Service may be provided by independently owned and operated service organizations. To assure proper credit and avoid unnecessary charges, you must obtain an LGE Return Authorization before returning any product to the LGE Service Center. Contact the Customer Interactive Center for details. TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL:

LGE Customer Interactive Center P.O. Box 240007 201 James Record Road Huntsville, Alabama 35824 http://www.lgservice.com P/N : 3828VA0528K