47LD450UA LCD TV MONITOR Users Manual

 

Order Number Test Report Number

: GETEC-C1-09-253

: GETEC-E3-09-148 FCC Class B Certification Page 1 / 1 APPENDIX G

: USERS MANUAL EUT Type: LCD TV/Monitor FCC ID.: BEJ47LD450UA LED LCD TV OWNERS MANUAL LED LCD TV MODELS 19LE5300 22LE5300 26LE5300 32LE5300 37LE5300 42LE5300 47LE5300 55LE5300 42LE7300 47LE7300 55LE7300 LCD TV OWNERS MANUAL LCD TV MODELS 32LD320 32LD420 42LD420 47LD420 32LD450 37LD450 42LD450 47LD450 32LD520 42LD520 47LD520 55LD520 42LD630 47LD630 55LD630 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. Model:

Serial:

For 29/22/26/32/37/42/47/55LE5300, 42/47/55LE7300 This product qualifies for ENERGY STAR in the fac-

tory default (Home Use) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA LG Customer Information Center P/NO : SAC34134204 (0911-REV00) www.lge.com WARNING / CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral trian-

gle, is intended to alert the user to the presence of uninsulated dan-

gerous voltage within the products enclo-

sure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equi-

lateral triangle is intended to alert the user to the presence of important oper-

ating and maintenance (servicing) instruc-

tions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guide-

lines for proper grounding and, in particular, speci-

fies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. 2 WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC Notice Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-

tection against harmful interference in a residen-

tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equip-

ment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is con-

nected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-

tions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device). Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product. SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, conve-

nience receptacles, and the point where they exit from the apparatus. 1 Do not use this apparatus near water. 2 Clean only with dry cloth. 7 Only use attachments/accessories speci-

fied by the manufacturer. 3 Do not block any ventilation openings. Install in accordance with the ma nufacturers instruc-

tions. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other appa-

ratus (including amplifiers) that produce heat. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. 5 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-

trician for replacement of the obsolete outlet. 10 Refer all servicing to qualified service per-

sonnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam-

aged, liquid has been spilled or objects have fallen into the apparatus, the appara-

tus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 SAFETY INSTRUCTIONS 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. 14 CAUTION concerning the Power Cord:

It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appli-

ance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, exten-

sion cords, frayed power cords, or damaged or cracked wire insulation are dangerous . Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discon-

tinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 4 15 WARNING - To reduce the risk of fire or elec-

trical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the appara-

tus (e.g. on shelves above the unit). 17 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong ground-

ed AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker 18 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. 19 As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. 23 Ventilation Install your TV where there is proper ventila-

tion. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in exces-

sively dusty places. 24 Take care not to touch the ventilation open-

ings. When watching the TV for a long period, the ventilation openings may become hot. 25 If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. 26 Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it. 27 Keep the product away from direct sunlight. 28 For LCD TV If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some tempo-

rary distortion effects on the screen. 20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna sys-

tem should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code

(NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding elec-

trodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp Electric Service Equipment Antenna Lead in Wire Antenna Discharge Unit

(NEC Section 810-20) Grounding Conductor

(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) NEC: National Electrical Code 21 Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. 22 Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. 5 CONTENTS WARNING / CAUTION. 2 SAFETY INSTRUCTIONS . 3 FEATURE OF THIS TV . 8 PREPARATION Accessories . 9 Front Panel Information . 10 Back Panel Information . 12 Stand Instructions . 14 VESA Wall Mounting. 18 Cable Management . 19 Desktop Pedestal Installation . 21 Swivel Stand . 21 Attaching the TV to a Desk . 22 Kensington Security System . 22 Securing the TV to the wall to prevent falling when the TV is used on a stand . 23 Antenna or Cable Connection . 24 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 25 DVD Setup . 29 VCR Setup . 33 Other A/V Source Setup . 36 USB Connection . 36 PC Setup . 37 Audio out Connection . 44 Network Setup. 45 WATCHING TV / CHANNEL CONTROL Remote Control Functions. 48 Turning On the TV . 50 Channel Selection . 50 Volume Adjustment . 50 Initial Setting . 51 On-Screen Menus Selection . 53 Quick Menu . 54 Channel Setup

- Auto Scan (Auto Tuning) . 55

- Add / Delete Channel (Manual Tuning) . 56

- Channel Editing. 57 Channel List . 58 Favorite Channel Setup / Favorite Channel List 59 Brief Information. 60 Simple Manual . 61 Input List . 62 Input Label. 63 AV Mode. 64 Key Lock . 65 SIMPLINK. 66 NETWORK Software Update. 68 Netflix ESN (Electronic Serial Number) . 69 NETCAST Yahoo! TV Widgets . 70 Netflix. 78 My Media . 90 YouTube. 108 NETCAST Time-Out Setting. 111 Vudu . 112 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 128 Picture Wizard . 130 Preset Picture Settings (Picture Mode) . 132 Manual Picture Adjustment - User Mode . 133 Picture Improvement Technology . 134 Expert Picture Control . 135 Energy Saving . 138 Picture Reset . 139 Image Sticking Minimization (ISM) Method. 140 Power Indicator . 141 Demo Mode. 142 6 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 170 Maintenance . 174 Product Specifications . 175 IR Codes . 176 Open Source License . 178 Legal Notice. 192 Auto Volume Leveler (Auto Volume) . 143 Clear Voice II . 144 Preset Sound Setting (Sound Mode) . 145 Sound Setting Adjustment - User Mode . 146 SRS Trusurround XT . 147 Balance . 148 TV Speakers On/Off Setup . 149 Audio Reset . 150 Stereo/SAP Broadcasts Setup . 151 Audio Language . 152 On-Screen Menus Language Selection . 153 Caption Mode

- Analog Broadcasting System Captions 154

- Digital Broadcasting System Captions 155

- Caption Option . 156 TIME SETTING Clock Setting

- Auto Clock Setup . 157

- Manual Clock Setup . 158 Auto On/Off Time Setting . 159 Sleep Timer Setting . 160 PARENTAL CONTROL / RATINGS Set Password & Lock System. 161 Channel Blocking . 164 Movie & TV Rating . 165 Downloadable Rating. 168 External Input Blocking . 169 7 FEATURE OF THIS TV

Some of these features are not available on all models. High-definition television. High-

resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. AV Mode is three preset picture and audio settings. It allows the viewer to quickly switch between common set-

tings. It includes Cinema, Sports, and Game Modes. A unique invisible speaker system tuned by renowned audio expert, Mr. Mark Levinson. Speakers are embed-

ded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system. The result s a clean, polished look, and enhanced audio by increasing the sweet spot, giving a wider and richer sound field. Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells. Unlike other sensors which can only sense brightness of ambient light, LGs Intelligent Sensor uses 4,096 sens-

ing steps to evaluate its surroundings. Using a sophisticated algorithm, the LG processes picture quality elements including brightness, contrast, color, sharpness and white balance. The result is a picture optimized for its surround-

ings, more pleasing to watch and which can also save up to 50% in power con-

sumption. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-

Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

Displays HDTV programs in full 1920 x 1080p resolution for a more detailed picture. Advance 120Hz panel provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture. View videos and photos and listen to music on your TV through USB 2.0

(videos dependent on model). ABOUT DIVX VIDEO: DivX is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified device must be registered in order to play DivX Video-

on-Demand (VOD) content. To gener-

ate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration pro-

cess and learn more about DivX VOD. DivX Certified to play DivX video up to HD 1080p, including premium con-

tent Pat. 7,295,673; 7,460,688;7,519,274 IMPORTANT INFORMATION TO PREVENT IMAGE BURN / BURN-IN ON YOUR TV SCREEN

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as image burn or burn-in. Image burn is not covered under the man-

ufacturers warranty.

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Image burn can also occur on the letter-

boxed areas of your TV if you use the 4:3 aspect ratio setting for an extended period. 8 ON DISPOSAL

(Only Hg lamp used LCD TV) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please con-

tact the dealer where you purchased the TV. The accessories included may differ from the images below. ENER GY SAVIN G 1 AV M O DE INPUT LIG HT TV 4 G 2 A B C3 D EF HI5 JK 7 PQ RS8 T U V0 9 WXYZ L6 M N O FLASHBK LIS T V O L M A R K H C FA V A R/N U ATIO M R D ELETE MUTE C H P A G E Q.M EN U M E N U E N T E R B A C K Owners Manual CD Manual IN F O E XIT FREEZE 1.5V 1.5V Remote Control, Batteries (AAA) Not included with all models Option Extras

* Wipe spots on the exterior only with the polishing cloth.

* Do not wipe roughly when remov-

ing stain. Excessive pressure may cause scratch or discoloration. Polishing Cloth When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compli-

ance. D-sub 15 pin Cable 32LD320, 32/42/47LD420

(Except 47LD420) x 4

(M4 x 20)???

Screws for stand assembly

(Refer to P.16) Screw for stand fixing

(Refer to P.22) Protection Cover

(Refer to P.17) Power Cord 32/42/47/55LD520

(Except 55LD520)

(Except 47/55LD520) x 4

(M4 x 20)???

Screws for stand assembly

(Refer to P.16) Screw for stand fixing

(Refer to P.22) Protection Cover

(Refer to P.17) Power Cord P R E P A R A T O N I 9 PREPARATION 19/22/26LE5300

(For 26LE5300) x 4 x 4

(M4 x 14)

(M4 x 20) x 4 Screws for stand assembly

(Refer to P.16) Cable Holder

(Refer to p.19) Ring spacers AC Adaptor P R E P A R A T O N I 32/37/42/47/55LE5300, 42/47/55LE7300

(Except 55LE5300, 55LE7300) x 8

(M4 x 20) x 2 Screws for stand assembly

(Refer to P.16) Screw for stand fixing

(Refer to P.22) Cable Holder

(Refer to p.19) Component/Audio Cable

(Refer to p.19) 32/37/42/47LD450, 42/47/55LD630

(For 32/37/42LD450, 42LD630) x 8

(M4 x 20) Screws for stand assembly

(Refer to P.16) Screw for stand fixing

(Refer to P.22) Protection Cover

(Refer to P.17) Power Cord OPTIONAL EXTRAS (For 42/47/55LE7300) Optional extras can be changed or modified for quality improvement without any notification new optioal extras can be added. Contact your dealer for buying these items. Wireless Media Box

(AN-WL100W) 10 PREPARATION

Image shown may differ from your TV. 32/37/42/47LD450 SPEAKER CH VOL ENTER MENU INPUT CHANNEL

(,) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.

! NOTE

Do not drag the TV. The floor or the TV may be damaged. P R E P A R A T O N I 12 PREPARATION 32/37/42/47LD450, 42/47/55LD630 32LD320, 32/42/47LD420, 32/42/47/55LD520 P R E P A R A T O N I 10 1 2 3 4 OPTICAL DIGITAL AUDIO OUT RGB IN (PC) RS-232C IN

(CONTROL & SERVICE) AV IN 1 L(MONO) AUDIO R VIDEO 5 1

/DVI IN AUDIO IN

(RGB/DVI) Y PB VIDEO PR L AUDIO R COMPONENT IN ANTENNA/

CABLE IN 7 6 18 8 1 9 5 N I B S U 2 N I

P H I R O D U A

) O N O M

L O E D V I AV IN 2 1 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). 2 RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUDIO IN (RGB/DVI) 1/8 (0.32 cm) headphone jack for analog PC audio input. 7 COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video &

red and white for audio. 8 USB INPUT Used for viewing photos and listening to MP3s. 9 HEADPHONE INPUT Plug the headphone into the headphone socket. 3 OPTICAL DIGITAL AUDIO OUT Digital optical audio output for use with amps and home theater systems. Note: In standby mode, this port doesnt work. 10 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 4 RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. This port is used for service or Hotel mode. 11 DC-IN 5 AV (Audio/Video) IN Analog composite connection. Supports stan-

dard definition video only (480i). 6 ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. P R E P A R A T O N I 19 PREPARATION STAND INSTRUCTIONS (For 19/22LE5300)

Image shown may differ from your TV. INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. P R E P A R A T O N I 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. 3 Assemble the TV as shown. 4 Fix the 4 screws securely using the holes in the back of the TV.

! NOTE

When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. 20 STAND BODY STAND BASE M4 x 14 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the screws from the TV. 3 Detach the stand from TV. 4 Grip the knob in your fingers and push it. P R E P A R A T O N I 21 STAND BASE PREPARATION STAND INSTRUCTIONS (For 26/32/37/42/47/55LE5300, 42/47/55LE7300)

Image shown may differ from your TV. INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. P R E P A R A T O N I 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. STAND BODY M4 x 20 STAND BASE 3 Assemble the TV as shown. 4 Assemble the part of the STAND REAR COVER with the TV. STAND REAR COVER 5 Fix the 4 screws securely using the holes in the back of the TV.

! NOTE

When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. M4 x 20 22 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the screws from the TV. 3 Detach the STAND REAR COVER from TV. 4 Detach the stand from TV. P R E P A R A T O N I 23 PREPARATION STAND INSTRUCTIONS (For 32/37/42/47LD450, 42/47/55LD630)

Image shown may differ from your TV. INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. P R E P A R A T O N I AC IN CABLE MANAGEMENT 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. STAND BODY M4 x 20 STAND BASE 3 Assemble the TV as shown. AC IN CABLE MANAGEMENT 4 Fix the 4 screws securely using the holes in the back of the TV. AC IN CABLE MANAGEMENT M4 x 20

! NOTE

When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. 24 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the screws from the TV. AC IN CABLE MANAGEMENT AC IN CABLE MANAGEMENT 3 Detach the stand from TV. AC IN CABLE MANAGEMENT PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. P R E P A R A T O N I 25 PREPARATION STAND INSTRUCTIONS

(For, 32LD320, 32/42/47LD420, 32/42/47/55LD520)

Image shown may differ from your TV. INSTALLATION (Except 55LD520) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. P R E P A R A T O N I 2 Assemble the TV as shown. 3 Fix the 4 screws securely using the holes in the back of the TV.

! NOTE

When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. M4 x 20 26 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the screws from the TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. P R E P A R A T O N I 27 PREPARATION VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building mate-

rials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. Model B VESA (A * B) A Standar Screw Quantity Wall Mounting Bracket

(sold separately) RW230 19LE5300, 22LE5300, 26LE5300 32LE5300, 32LD320, 32LD420, 32LD450, 32LD520 47LE5300, 37LD450, 37LE5300, 42LE5300, 42LE7300, 47LE7300 42LD450, 47LD450, 42LD420, 47LD420, 42LD520, 47LD520, 42LD630, 47LD630 200 * 100 M4 200 * 200 M6 55LE7300, 55LD520 400 * 400 M6 RW230 , AW-47LG30M AW-47LG30M AW-55LH40M 4 4 4 P R E P A R A T O N I 28

! NOTE

Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.

Standard dimensions for wall mount kits are shown in the table.

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

Do not use screws longer then the standard dimension, as they may cause damage to the inside to the TV.

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications.

Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents.

LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions. P R E P A R A T O N I CAUTION

Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock. For 19/22/26LE5300 4-RING SPACERS Place the ring spacers on the set before installing the wall mounting bracket so that the inclination of the backside of the set can be adjusted perpendicularly. 29 PREPARATION CABLE MANAGEMENT

Image shown may differ from your TV. 32/37/42/47LD450, 32LD320, 32/42/47LD420, 32/42/47/55LD520, 42/47/55LD630 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Open the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. P R E P A R A T O N I 30 19/22/26LE5300 1 After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. AC-IN K 32/37/42/47/55LE5300, 42/47/55LE7300 1 Secure the power cord with the CABLE HOLDER on the TV back cover. It will help prevent the power cable from being removed by accident. 2 After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. CABLE HOLDER CABLE HOLDER CABLE HOLDER P R E P A R A T O N I 31 PREPARATION DESKTOP PEDESTAL INSTALLATION

Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION

Ensure adequate ventilation by following the clearance recommendations.

Do not mount near or above any type of heat source. SWIVEL STAND (Except 19/22/26LE5300) After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. P R E P A R A T O N I 32 ATTACHING THE TV TO A DESK

(For 32LD320, 32/42LD420, 32/37/42LD450, 32/42LD520, 42LD630, 32/37/42/47LE5300, 42/47LE7500)

Image shown may differ from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten-

tially causing injury or damaging the product. Stand Desk 1-Screw

( provided as parts of the product) WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installa-

tion instructions. Tipping, shaking, or rocking the machine may cause injury. KENSINGTON SECURITY SYSTEM

This feature is not available for all models.

- The TV is equipped with a Kensington Security System con-

nector on the back panel. Connect the Kensington Security System cable as shown below.

- For the detailed installation and use of the Kensington Security System, refer to the users guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors. NOTE: The Kensington Security System is an optional accessory. P R E P A R A T O N I 33 PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. P R E P A R A T O N I

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.

Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

Use a platform or cabinet strong enough and large enough to support the size and weight of

To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the TV. the same. 34

To prevent damage do not connect to the power outlet until all connections are made between the devices.

Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Wall Antenna Socket Outdoor Antenna

(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments

(Connect to wall antenna socket) ANTENNA/

CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the copper wire when connecting the antenna. ANTENNA/

CABLE IN RF Coaxial Wire (75 ohm)

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter.

If the antenna is not installed properly, contact your dealer for assistance.

Refer to http://AntennaWeb.org for more information about antennas and Digital TV. P R E P A R A T O N I 35 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. E X T E R N A L E Q U I P M E N T S E T U P Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y

= green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV. 2. How to use

Turn on the digital set-top box.

(Refer to the owners manual for the digital set-top box operation.)

Select the Component input source on the TV using the INPUT button on the remote control. Y PB PR L R 1 VI) 2 1 2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO GB IN (PC) Y PB VIDEO PR L AUDIO COMPONENT IN R ANTENNA/

CABLE IN Supported Resolutions Y, CB/PB, CR/PR Signal 480i 480p 720p 1080i 1080p 36 Component HDMI Resolution Horizontal Frequency(KHz) Vertical Frequency(KHz) Yes Yes Yes Yes Yes No Yes Yes Yes Yes 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 HDMI Connection 1. How to connect 1 Connect the digital set-top box to HDMI/DVI IN 1, 2, or 3* jack on the TV. DC-IN N 1

(DVI) I I V D

2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO 1 2 No separate audio connection is necessary. HDMI supports both audio and video. RGB IN (PC) Y PB VIDEO PR L AUDIO COMPONENT IN 2. How to use

Turn on the digital set-top box.

(Refer to the owners manual for the digital set-

top box.)

Select the HDMI1, HDMI2, or HDMI3* input source on the TV using the INPUT button on the remote control.

* HDMI 3: For 26LE5300 HDMI OUTPUT

! NOTE

Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

HDMI Audio Supported Format: AC3

(32KHz, 44.1KHz,48KHz), Linear PCM (32KHz, 44.1KHz,48KHz) HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(KHz) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 R E X T E R N A L E Q U I P M E N T S E T U P 37 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect 1 Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1 jack on the TV. DC-IN N 1

(DVI) I I V D

2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) 1 VIDEO AUDIO R 2 Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV. RGB IN (PC) Y PB VIDEO PR L AUDIO R COMPONENT IN 2. How to use

Turn on the digital set-top box.

(Refer to the owners manual for the digital set-

top box.)

Select the HDMI1 input source on the TV using the INPUT button on the remote control.

! NOTE

A DVI to HDMI cable or adapter is required for this con-

nection. DVI doesn't support audio, so a separate audio connection is necessary. 2 R L AUDIO DVI OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 38 DVD SETUP Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV. 2. How to use

Turn on the DVD player, insert a DVD.

Select the Component input source on the TV using the INPUT button on the remote control.

Refer to the DVD players manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr Y PB PR L R 1

(DVI) 2 1 2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO RGB IN (PC) Y PB VIDEO PR L AUDIO COMPONENT IN R ANTENNA/

CABLE IN E X T E R N A L E Q U I P M E N T S E T U P 39 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 1 DVI) 2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO 2. How to use GB IN (PC) Y

Turn on the DVD player, insert a DVD.

Select the AV or AV1/2* input source on the TV using the INPUT button on the remote control.

Refer to the DVD player's manual for operating instructions. PB VIDEO PR L AUDIO COMPONENT IN R ANTENNA/

CABLE IN 1 VIDEO L R AUDIO 2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO RGB IN (PC) Y 1 PR PB VIDEO L AUDIO R COMPONENT IN HDMI OUTPUT N 1

(DVI) I I V D

* AV2: Except 19/22/26LE5300 HDMI Connection 1. How to connect 1 Connect the HDMI output of the DVD to the HDMI/DVI IN 1, 2 or 3* jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. DC-IN 2. How to use

Select the HDMI1, HDMI2, or HDMI3* input source on the TV using the INPUT button on the remote control.

Refer to the DVD player's manual for operating instructions.

* HDMI 3: For 26LE5300

! NOTE

Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

HDMI Audio Supported Format: AC3

(32KHz, 44.1KHz,48KHz), Linear PCM (32KHz, 44.1KHz,48KHz) E X T E R N A L E Q U I P M E N T S E T U P 40 VCR SETUP Antenna Connection 1. How to connect 1 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the TV. 2 Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use

Set VCR output switch to 3 or 4 and then tune TV to the same channel num-

ber.

Insert a video tape into the VCR and press PLAY on the VCR (Refer to the VCR owners manual). Composite (RCA) Connection 1. How to connect N O) AUDIO R R L AUDIO N ANTENNA/

CABLE IN 1 ANT OUT S-VIDEO VIDEO L R AUDIO ANT IN OUTPUT SWITCH Wall Jack 2 Antenna 1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use 2 VI) RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)

Select the AV or AV1/2* input source on the TV using the INPUT button on the remote control. B IN (PC) Y PB VIDEO PR L AUDIO COMPONENT IN R ANTENNA/

CABLE IN

* AV2: Except 19/22/26LE5300

! NOTE

If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. 1 ANT IN S-VIDEO VIDEO L R AUDIO ANT OUT OUTPUT SWITCH E X T E R N A L E Q U I P M E N T S E T U P 41 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors.

(Video = yellow, Audio Left = white, and Audio Right = red) DC-IN 2. How to use

Select the AV or AV1/2* input source on the TV using the INPUT button on the remote control.

Operate the corresponding external equipment. N I I V D

1

(DVI) 2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO RGB IN (PC) Y PB VIDEO PR L AUDIO COMPONENT IN R ANTENNA/

CABLE IN 1

* AV2: Except 19/22/26LE5300 VIDEO L R Video Game Set Camcorder E X T E R N A L E Q U I P M E N T S E T U P 42 USB CONNECTION 1. How to connect 1 Connect the USB device to the USB IN jack on the side of TV. 2. How to use

After connecting the USB IN jack, you use the USB function. (p.90) HEADPHONE SETUP You can listen to the sound through the headphone. 1. How to connect 1 Plug the headphone into the head-

phone socket. 2 To adjust the headphone volume, press the VOL +/- button. If you press the MUTE button, the sound from the headphone is switched off.

! NOTE

AUDIO menu options are disabled when connecting a head-

phone.

When changing AV MODE with a headphone connected, the change is applied to video but not to audio.

Optical Digital Audio Out is not available when connecting a headphone. N I B S U or Memory Key 3 N I

P H

P H E X T E R N A L E Q U I P M E N T S E T U P 43 EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION Send the TVs audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). N I I V D

1

(DVI) 2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO RGB IN (PC) Y 1 PR PB VIDEO COMPONENT IN L AUDIO R ANTENNA/

CABLE IN 2 E X T E R N A L E Q U I P M E N T S E T U P 1. How to connect 1 Connect one end of the optical cable to the TV port of OPTICAL DIGITAL AUDIO OUT. 2 Connect the other end of the optical cable to the digital audio input on the audio equip-

ment. 3 Set the TV Speaker option - Off in the AUDIO menu. (p.149). See the external audio equipment instruction manual for operation.

! NOTE

When connecting with external audio equipment, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (p.149) CAUTION

Do not look into the optical output port. Looking at the laser beam may damage your vision.

Audio with ACP (Audio Copy Protection) function may block digital audio output. 44 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set-

tings. VGA (D-Sub 15 Pin) Connection DC-IN V D

(DVI) RS 232C IN

(CONTROL&SERVICE) 1. How to connect AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO PB VIDEO PR L AUDIO COMPONENT IN 1 Connect the VGA output of the PC to the RGB IN (PC) jack on the TV. RGB IN (PC) Y 2 Connect PC audio output to the AUDIO IN

(RGB/DVI) jack on the TV. 2. How to use

Turn on the PC and the TV.

Select the RGB-PC input source on the TV using the INPUT button on the remote control. 1 2 RGB OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 45 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect 1 Connect the DVI output of the PC to the HDMI/

DVI IN 1 jack on the TV. 2 Connect the PC audio output to the AUDIO IN

(RGB/DVI) jack on the TV. DC-IN N 1

(DVI) I I V D

2 RS-232C IN

(CONTROL&SERVICE) AUDIO IN RGB/DVI OPTICAL DIGITAL AUDIO OUT AV IN L(MONO) AUDIO R VIDEO 2. How to use

Turn on the PC and the TV.

Select the HDMI1 input source on the TV using the INPUT button on the remote control. RGB IN (PC) Y 2 PB VIDEO PR L AUDIO R COMPONENT IN 1

! NOTE

Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. AUDIO DVI OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 46

! NOTE

To get the the best picture quality, adjust the PC graphics card to 1920x1080.

Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.

In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-

ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen.

The synchronization input form for Horizontal and Vertical frequencies is separate.

Depending on the graphics card, some resolution settings may not allow the image to be posi-

tioned on the screen properly.

If there are overscan in HDMI-PC 1920x1080, change aspect ratio to Just scan.

When selecting HDMI-PC, set the Input Label - PC in the OPTION menu. Supported Display Specifications (RGB-PC, HDMI-PC) Resolution Horizontal Frequency(KHz) Vertical Frequency(KHz) 640x350 31.468 720x400 640x480 800x600 31.469 31.469 37.879 1024x768 48.363 1280x768 1360x768 47.776 47.712 1280x1024 63.981 1600x1200 75.00 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 67.50 70.09 70.08 59.94 60.31 60.00 59.87 60.015 60.02 60.00 59.934 60.00 E X T E R N A L E Q U I P M E N T S E T U P 47 WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns the TV on from standby or off to standby. ENERGY SAVING Adjusts the Energy Saving setting. p.138 ENERGY AV MODE INPUT AV MODE Toggles through preset Video and Audio modes.

p.64 INPUT Rotates through inputs. Also switches the TV on from standby. p.62 TV Returns to the last TV channel. NUMBER button

(DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. LIST Displays the channel table. p. FLASHBK Tunes to the last channel viewed. MENU Displays the main menu or clears all on-screen displays and return to TV viewing. SAVING 1 4 7 TV 3 6 9 FLASHBK 2 5 8 0 LIST MARK FAV VOL RATIO CH P A G E MUTE MENU INFO Q.MENU INFO Displays channel information at the top of the screen. ENTER Q.MENU Opens the list of Quick Menu options. p. THUMBSTICK

(Up/Down/Left Right/ENTER) Navigates the on-screen menus and adjusts the system settings to your preference. BACK EXIT BACK Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. p.66-67 EXIT Clears all on-screen displays and return to TV viewing. W A T C H I N G T V

C H A N N E L C O N T R O L 52 VOLUME UP/DOWN Adjusts the volume. FAV Scroll through the programmed Favorite channels. p.59 MARK Select the input to apply the Picture Wizard settings. p.131 Use to mark or unmark a photo/music/movie. p.94, 99, 103 RATIO Changes the aspect ratio. p.59 MUTE Switches the sound on or off. p.50 CHANNEL UP/DOWN PAGE UP/DOWN COLOR BUTTON USB, SIMPLINK Control buttons Changes the channel. Moves from one full set of screen information to the next one. Access special functions in some menus. Controls MY MEDIA menu (Photo List, Music List, Movie List) Controls the SIMPLINK compatible devices. Installing Batteries

Open the battery compartment cover on the back side and install the batteries matching correct polar-

ity.

Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones.

Close cover. W A T C H I N G T V

C H A N N E L C O N T R O L 53 WATCHING TV / CHANNEL CONTROL TURNING ON THE TV 1 2 3 First, connect power cord correctly. At this moment, the TV switches to standby mode.

In standby mode to turn TV on, press the press the POWER, INPUT, CH (or ), Number (0~9) button on the remote control.

/ I, INPUT, CH CH (or ) button on the TV or Select the viewing source by using the INPUT button on the remote control. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.

! NOTE

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

If you do not complete the Initial setting, it will appear whenever the TV is switched on until the Initial setting procedure is completed. CHANNEL SELECTION 1 Press the CH (or ) or NUMBER buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 2 3 Press the VOL (+ or -) button to adjust the volume. If you want to switch the sound off, press the MUTE button. You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button. W A T C H I N G T V

C H A N N E L C O N T R O L 54 SIMPLINK Functions

Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.

Select AV device: Enables you to select one of the AV devices connected to the TV.

Disc playback: Control connected AV devices by pressing the , ENTER, , , , and but-

tons.

Power off all devices: When you power off the TV, all connected devices are turned off.

Switch audio-out: Offers an easy way to switch audio-out.

Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play, The TV will automatically turn on. Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC:

Consumer Electronics Control).

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function)

! NOTE

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop.

When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers and the TV speakers are turned off.

If a connected SIMPLINK home theater system doesnt play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an OPTICAL cable. W A T C H I N G T V

C H A N N E L C O N T R O L 77 MY MEDIA MY MEDIA ENTRY MODE When you connect a USB device, the pop up menu is displayed, automatically. When the Pop Up menu does not appear, you can select Movie List, Photo List or Music List in the USB menu. On USB device, you can not add a new folder or delete the existing folder.

MENU ENTER ENTER Select MY MEDIA. Select Movie List, Photo List or Music List.

This TV can view JPG image files and HD DivX files and play MP3 audio files. Select the desired device. When removing the USB device BACK Return to the previous menu. BLUE Search other network device. Select the USB Device menu before removing the USB device. 1 Select USB Device. Q.MENU 2 ENTER Select Eject. M Y M E D I A 1 2 3 4 78 CONNECTION METHOD USB Connection 1 Connect the USB device to the USB IN jack on the TV. 2 N I B S U 1 N I B S U 4 N I Memory Key USB memory stick Precautions when using the USB device

Only a USB storage device is recognizable.

Connecting a USB storage device through a USB hub is not supported.

A USB storage device which uses its own driver may not be recognized.

The recognition speed of a USB storage device may depend on each device.

Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

Only use a USB storage device which has normal music files or image files.

Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system pro-

vided with the Windows operating system. Others may not be recognized.

Some USB storage devices require a power adapter. The power adapter must be connected in order to be seen by the TV.

If a device is not recognized by the TV, try a different cable. Excessively long cables are not sup-

ported.

Some USB storage devices may not be supported or operate properly.

Please backup important files because data on USB device could be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.

If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.

In case of USB storage devices formatted as NTFS, deletion is not supported.

File alignment method of USB storage device is similar to Window XP and file names can be up to 100 English characters.

The recommended capacity is 1TB or less for a USB external hard disk and 32 GB or less for USB memory.

If a USB external hard disk with a Energy Saving function doesnt work, turn the hard disk off and on again to make it work properly. Refer to the user manual of the USB external hard disk. M Y M E D I A 79 MY MEDIA MOVIE LIST It displays all of the video files it recognizes. The On-Screen Display on your model may be slightly different. Precautions when playing the video files

Some user-created subtitles may not work properly.

Some special characters are not supported in subtitles.

HTML tags are not supported in subtitles.

Subtitles in languages other than the supported languages are not available.

Time information in an external subtitle file should be arranged in ascending order to be played.

The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.

A damaged video file may not be played correctly, or some player functions may not be usable.

Video files produced with some encoders may not be played correctly.

If the video and audio structure of recorded file is not interleaved, either video or audio is output-

Video with resolution higher than maximum resolution supported for each frame, cannot be guar-

anteed for smooth playback.

Movie files other than the specified types and formats may not work properly.

The movie file encoded by the GMC (Global Motion Compensation) is not supported.

Only the files saved in ASCII Code is supported in subtitles.

Only 250 Korean characters, 500 alphabets and 500 numbers are supported for each line of the

Only 10,000 of sync blocks can be supported within the subtitle file.

We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264.

DTS Audio codec is not supported.

A video file more than 30GB in file size is not supported for playback.

Playing a video via a USB connection that doesnt support high speed may not work properly.

USB storage devices below USB 2.0 are supported as well. But they may not work properly in the ted. subtitle. movie list.

The video file and its subtitle file must be located in the same folder. At this time, a video file name and its subtitle file name must be identical for it to be displayed.

When you are watching the movie by Movie List function, you can adjust the picture by ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode does not operate. M Y M E D I A 80 Supported DivX file File Extensions Audio/

Video Codec Profile/Level Support Explanation VC-1 Advanced Profile Advanced Profile@Level 3

(e.g. 720p60, 1080i60, 1080p30) VC-1 Simple and Main Profiles Simple Profile@Medium Level (e.g. CIF, QVGA) Main Profile@High Level (e.g. 1080p30) Only streams compliant to SMPTE 421M VC-1 standard are supported. asf

.wmv

.wma

.divx

.avi

.mp4

.m4a

.m4v

.mkv

.ts

.trp

.tp

.vob

.mpg Video Audio Video Video Audio Video Audio Video Audio Video Audio Video Audio WMA Standard WMA 9 Professional DivX3.11 DivX4 DivX5 DivX6 XViD H.264 / AVC MPEG-1 Layer I, II Audio MPEG-1 Layer III (MP3) AC-3 H.264 / AVC Advanced Simple Profile

(e.g. 720p/1080i) Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) Global motion compen-

sation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. Global motion compen-

sation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. Most of the MKV con-

tent available is encod-

ed by the open source x264 codec. MPEG-4 Part 2 Advanced Simple Profile (e.g. 720p/1080i) AAC H.264 / AVC AAC AC-3 H.264 / AVC AAC-LC and AAC-HE Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) AAC-LC and AAC-HE Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) MPEG-2 Main Profile@High Level(e.g. 720p60, 1080i60) VC-1 MPEG-1Layer I, II MPEG-1 Layer III (MP3) AC-3 AAC MPEG-1 MPEG-2 AC-3 MPEG-1Layer I, II DVD-LPCM MPEG-1 MPEG-2 MPEG-1Layer I, II Simple Profile@Medium Level

(e.g. CIF, QVGA) Main Profile@High Level

(e.g. 1080p30) Advanced Profile@Level3

(e.g. 720p60, 1080i60, 1080p30) Only streams compliant to SMPTE 421M VC-1 standard are supported. AAC-LC and AAC-HE Main Profile@High Level (e.g. 720p60, 1080i60) Main Profile@High Level (e.g. 720p60, 1080i60) Only streams compliant configured properly for TS, PS or ES M Y M E D I A 81 MY MEDIA Screen Components You can also adjust USB in the INPUT menu. 1 MENU Select MY MEDIA. 2 ENTER ENTER Select Movie List. 1 Moves to upper level folder 2 Current page/Total pages 3 Corresponding buttons on the remote control 4 Contents under the folder focused on 1 1 5 Current page/ total pages of contents under the folder focused on 1

1 2

5 4

3 RED Changed device. GREEN Converted to Photo List. YELLOW Change Numbers: A method to view in 5 large photos or simple list. BLUE Enter to Mark Mode. EXIT Return to TV viewing. ENERGY SAVING Press the ENERGY SAVING button repeatedly to increase the brightness of your screen (Refer to p. ?). M Y M E D I A 82 PHOTO LIST The On-Screen Display on your model may be slightly different. Supported photo file: *.JPG

You can play JPG files only.

Only baseline scan is supported among JPG (not progressive).

Available JPG size: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height) Screen Components 1 MENU Select MY MEDIA. 2 ENTER ENTER Select Photo List. 1 Moves to upper level folder 2 Current page/Total pages 3 Corresponding buttons on the remote control 4 Contents under the folder focused on 1 1 5 Current page/total pages of contents under the folder focused on 1

2

1

3 M Y M E D I A 5 4 RED Changed device. GREEN Converted to Music List. YELLOW Change Numbers: A method to view in 5 large photos or simple list. BLUE Enter to Mark Mode. EXIT Return to TV viewing. ENERGY SAVING Press the ENERGY SAVING button repeatedly to increase the brightness of your screen (Refer to p. ?). 87 MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 ~ 320 Sampling rate MPEG1 Layer3 : 32kHz, 44.1kHz, 48kHz Sampling rate MPEG2 Layer3 : 16kHz, 22.05kHz, 24kHz Sampling rate MPEG2.5 Layer3 : 8kHz, 11.025kHz, 12kHz Screen Components 1 MENU Select MY MEDIA. 2 ENTER ENTER Select Music List. 1 Preview: If any album jacket for the file (Album Art Image) exists, this jacket is displayed. 2 Moves to upper level folder 3 Current page/Total pages 4 Corresponding buttons on the remote control 5 Contents under the folder focused on 1 6 Current page/total pages of contents under the folder focused on 1 RED Changed device. GREEN Converted to Movie List. 1 2

3 YELLOW Change Numbers: A method to view in 5 large photos or simple list. BLUE Enter to Mark Mode. EXIT ENERGY SAVING Return to TV viewing. Press the ENERGY SAVING button repeatedly to increase the brightness of your screen (Refer to p. ?). M Y M E D I A 5 4 93

If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver.

The Screen Saver?

Screen saver is to prevent screen pixel damage due to an fixed mage remaining on the screen for a extended period of time

! NOTE

When a music file is played, is displayed in front of the music play time.

A damaged or corrupted music file that does not play displays 00:00 as the play time.

Music files with copy-protection will not play.

Press ENTER, or BACK button to stop the screen saver. M Y M E D I A 97 MY MEDIA DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.

(Only DivX files matched with the registration code of the purchased TV are playable.)

M Y M E D I A 1 2 3 4 MENU Select MY MEDIA. ENTER BLUE Select DivX Option. Select DivX Reg. Code. ENTER Display Divx Reg. Code.

! NOTE

When loading, some buttons may not work.

If you use the DivX registration code of another device, the rented or purchased DivX file cannot be played. Therefore always use the DivX registration code assigned to this product.

The video or audio of a file converted based on a standard other than the DivX codec standard may be corrupted or unable to be played. 98 DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web server and are blocked from activating more devices. DivX VOD allows the consumer to activate up to 6 devices under one account. Delete the existing authentication information to receive a new DivX user authentication for TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files.

1 2 3 4 5 MENU Select MY MEDIA. ENTER BLUE Select DivX Option. Select Deactivation. ENTER Select Yes. ENTER Display Deactivation. M Y M E D I A 99 Dynamic Contrast

Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Color Skin Color

(For LCD TV)

Adjusts screen colors so that they look livelier, richer and clearer. This fea-

ture enhances hue, saturation and luminance so that red, blue, green and white look more vivid.

Expresses natural skin by detecting skin area of the video. Noise Reduction

Reduces screen noise without compromising video quality. Digital Noise Reduction Gamma Black Level

Removes noise regarding MPEG compressed video.

You can adjust brightness of dark area and middle gray level area of the picture. Low or 1.9 : Make brighter and middle gray level area of the picture brighter. Medium or 2.2 : Express original picture levels. High or 2.4: Make dark and middle gray level area of the picture darker. Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter.

Set black level of the screen to proper level.

This function is available in the following modes: AV (NTSC-M), HDMI or Component. P I C T U R E C O N T R O L Clear White

Make brighter and clear the white area of screen. Eye Care

(For LCD TV) Real Cinema or Film Mode Color Gamut

Adjust the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures.

This feature is disabled in Picture Mode-Vivid, Cinema, Intelligent Sensor

(For LCD TV).

Makes video clips recorded in film look more natural by eliminating judder effect.

DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect. Advanced Control Standard: Displays standard set of colors. Wide: Increase number of colors used.

Maximize the utilization of color to increase color quality. Expert Control

Displays color domain of signal in Expert Control. 109 PICTURE CONTROL Edge Enhancer

Show clearer and distinctive yet natural edges in of the video. xvYCC

*This feature is not available for all models.

This is the function to express richer color.

This feature represents rich color as much as conventional video signal.

This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted through HDMI. Color Filter

This is the function to filter the specific colors of the video. You can use the RGB filter to set color saturation and hue accurately. Expert Pattern

This is the pattern necessary for expert adjustment.

This function is enabled in "Picture mode - Expert" when you watch DTV. Color Temperature

Adjusts the overall color of the screen by changing the color of white. a. Method : 2 Points

- Pattern: Inner, Outer

- Red/Green/Blue Contrast, Red/Green/Blue Brightness:

The adjustment range is -50 - +50. LCD TV b. Method : 10 Point IRE

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting.

- Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.

- Red/Green/Blue: The adjustment range is -50 - +50. Plasma TV b. Method : 20 Point IRE

- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue according to each setting.

- Red/Green/Blue: The adjustment range is -50 - +50. Color Management System

As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow). Color difference may not be distinctive even when you make the adjust-

ments for the general video. Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.

- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is

-30 - +30.

- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30

- +30.

- This feature is disable in RGB-PC and HDMI-PC mode. OPC

*This feature is not available for all models.

As the technology to reduce the power consumption while keeping the same brightness, this has the effect of reducing power consumption, improvement in contrast. P I C T U R E C O N T R O L 110 APPENDIX PARENTAL CONTROL / RATINGS TROUBLESHOOTING Abnormal Operation The remote control doesnt work

Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

Ensure that the correct remote operating mode is set: TV, VCR etc.

Install new batteries.

*This feature is not available for all models. Power is suddenly turned off

Is the sleep timer set?

Check the power control settings. Power interrupted.

If there is no signal, the TV turns off automatically in 15 minutes. Video Problems No picture &No sound

Check whether the product is turned on.

Try another channel. The problem may be with the broadcast.

Is the power cord inserted into wall power outlet?

Check your antenna direction and/or location.

Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on

This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. No or poor color or poor picture

Adjust Color in menu option.

Keep a sufficient distance between the product and the VCR.

Try another channel. The problem may be with the broadcast.

Are the video cables installed properly?

Activate any function to restore the brightness of the picture. Horizontal/vertical bars

Check for local interference such as an electrical appliance or power or picture shaking tool. Poor reception on some channels Lines or streaks in pic-

tures No picture when con-

necting HDMI

Station or cable product experiencing problems, tune to another station.

Station signal is weak, reorient antenna to receive weaker station.

Check for sources of possible interference.

Check antenna (Change the direction of the antenna).

Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI ver-

sion 1.3. P A R E N T A L C O N T R O L

R A T I N G 142

Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with correct polarity (+ to +, - to

Ensure that the correct remote operating mode is set: TV, VCR etc.

Install new batteries.

Adjust Balance in menu option.

A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.

Check HDMI cable over version 1.3.

Check USB cable over version 2.0.

Use normal MP3 file.

*This feature is not available for all models. Audio Problems Picture OK & No sound No output from one of the speakers Unusual sound from inside the product No sound when connecting HDMI/USB PC Mode Problems The signal is out of range

Adjust resolution, horizontal frequency, or vertical frequency on the PC.

Check the input source. Vertical bar or stripe on background &

Horizontal Noise &

Incorrect position

Activate the Auto configure feature or adjust size, phase, or H/V position.

(Option) Screen color is unsta-

ble or single color

Check the signal cable.

Reinstall the PC video card. When connecting the HDMI cable to the PC, there is no audio.

Check the manual for the video card in the PC to see if it supports HDMI audio and how to set it up properly. P A R E N T A L C O N T R O L

R A T I N G 143 APPENDIX Movie List Problems The file does not appear on the Movie

Check whether the extension is supported. List. Message is displayed saying This file is invalid or the audio is working normally but the video is not work-

ing normally. Message is displayed saying Unsupported Audio or the video is working normally but the audio is not work-

ing normally. Subtitle is not working.

Check whether the file is playing normally on a PC. (Check whether the file is damaged.)

Check whether the resolution is supported.

Check whether the video/audio codec is supported.

Check whether the frame rate is supported.

Check whether the file is playing normally on a PC. (Check whether the file is damaged.)

Check whether the audio codec is supported.

Check whether the bit rate is supported.

Check whether the sample rate is supported.

Check whether the file is playing normally on a PC. (Check whether the file is damaged.)

Check whether the video file and subtitle file name are the same.

Check whether the video file and subtitle file are located in the same folder.

Check whether the subtitle file is supported.

Check whether the language is supported. (When you open the subtitle file in Memo Pad, you can check the language of the subtitle file.) A P P E N D I X 144 MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

Please be sure not to use a wet cloth. Extended Absence CAUTION

If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 145 APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand 19LE5300

(19LE5300-UE) 18.6 x 14.4 x 6.1 inches 471.2 x 365.9 x 155.4 mm 18.6 x 12.4 x 1.4 inches 471.2 x 315.5 x 34.4 mm 7.5 lbs / 3.4 kg 7.1 lbs / 3.2 kg 26LE5300

(26LE5300-UE) 25.7 x 18.9 x 7.5 inches 652.0 x 480.8 x 191.4 mm 25.7 x 16.5 x 1.4 inches 652.0 x 420.3 x 34.4 mm 13.4 lbs / 6.1 kg 11.2 lbs / 5.1 kg 22LE5300

(22LE5300-UE) 21.4 x 16.0 x 6.1 inches 542.9 x 407.1 x 155.4 mm 21.4 x 14.1 x 1.4 inches 542.9 x 357.6 x 34.4 mm 9.3 lbs / 4.2 kg 8.6 lbs / 3.9 kg 32LE5300

(32LE5300-UA) 30.9 x 22.0 x 8.7 inches 784.6 x 558.1 x 221.0 mm 30.9 x 19.7 x 1.6 inches 784.6 x 499.5 x 39.9 mm 27.9 lbs / 12.6 kg 23.1 lbs / 10.5 kg 37LE5300

(37LE5300-UA) 35.6 x 24.8 x 10.6 inches 905.0 x 630.0 x 270.0 mm 35.6 x 24.8 x 1.6 inches 905.0 x 630.0 x 39.9 mm 33.7 lbs / 15.3 kg 26.0 lbs / 11.8 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 146 MODELS Dimensions

(Width x Height x Depth) With stand Without stand 42LE7300

(42LE7300-UA) 40.0 x 27.2 x 10.6 inches 1018.2 x 693.5 x 269.8 mm 40.0 x 24.8 x 1.1 inches 1018.2 x 630.7 x 29.3 mm Weight With stand 48.2 lbs / 21.9 kg Without stand 42.1 lbs / 19.1 kg 47LE7300

(47LE7300-UA) 44.4 x 29.8 x 11.1 inches 1128.6 x 758.9 x 284.4 mm 44.4 x 27.2 x 1.1 inches 1128.6 x 693.3 x 29.8 mm 57.7 lbs / 26.2 kg 50.7 lbs / 23.0 kg MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity 55LE7300

(55LE7300-UA) 51.4 x 34.1 x 12.9 inches 1306.0 x 867.7 x 328.0 mm 51.4 x 31.3 x 1.2 inches 1306.0 x 797.4 x 31.2 mm 84.6 lbs / 38.4 kg 72.3 lbs / 32.8 kg AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 147 APPENDIX MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS 32LD320

(32LD320-UA) 31.6 x 22.9 x 8.8 inches 805.0 x 583.0 x 224.0 mm 31.6 x 20.7 x 3.1 inches 805.0 x 528.0 x 79.9 mm 25.3 lbs / 11.5 kg 22.7 lbs / 10.3 kg 42LD420

(42LD420-UA) 40.4 x 28.1 x 11.6 inches 1028.0 x 715.4 x 297.0 mm 40.4 x 25.9 x 3.4 inches 1028.0 x 658.6 x 88.7 mm 39.6 lbs / 18.0 kg 35.7 lbs / 16.2 kg 32LD450

(32LD450-UA) 31.5 x 21.9 x 8.1 inches 799.0 x 555.0 x 207.0 mm 31.5 x 19.9 x 2.9 inches 799.0 x 506.0 x 73.5 mm 20.1 lbs / 9.1 kg 17.9 lbs / 8.1 kg 42LD450

(42LD450-UA) A P P E N D I X Dimensions

(Width x Height x Depth) With stand Without stand 40.3 x 27.0 x 10.3 inches 1023.0 x 685.0 x 261.0 mm 40.3 x 25.0 x 3.0 inches 1023.0 x 635.0 x 76.6 mm Weight With stand 33.1 lbs / 15.0 kg Without stand 29.8 lbs / 13.5 kg 32LD420

(32LD420-UA) 31.6 x 22.9 x 8.8 inches 805.0 x 583.0 x 224.0 mm 31.6 x 20.9 x 3.1 inches 805.0 x 531.0 x 79.9 mm 26.6 lbs / 12.1 kg 24.2 lbs / 11.0 kg 47LD420

(47LD420-UA) 44.9 x 30.8 x 13.2 inches 1140.6 x 784.8 x 337.4 mm 44.9 x 28.4 x 3.8 inches 1140.6 x 722.9 x 99.0 mm 49.6 lbs / 22.5 kg 43.8 lbs / 19.9 kg 37LD450

(37LD450-UA) 36.1 x 24.6 x 10.3 inches 916.0 x 625.0 x 261.0 mm 36.1 x 22.6 x 3.0 inches 916.0 x 575.0 x 77.4 mm 27.6 lbs / 12.5 kg 23.8 lbs / 10.8 kg 47LD450

(47LD450-UA) 44.7 x 29.8 x 10.6 inches 1136.0 x 757.0 x 270.0 mm 44.7 x 27.5 x 3.0 inches 1136.0 x 698.0 x 76.5 mm 43.0 lbs / 19.5 kg 38.6 lbs / 17.5 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

The specifications shown above may be changed without prior notice for quality improvement. 148 MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand 42LD520

(42LD520-UA) 41.4 x 28.3 x 11.6 inches 1052.2 x 719.1 x 296.2 mm 41.5 x 25.8 x 3.5 inches 1052.2 x 657.3 x 90.8 mm 41.8 lbs / 19.0 kg 37.9 lbs / 17.2 kg 47LD520

(47LD520-UA) 46.1 x 31.0 x 13.2 inches 1173.4 x 789.7 x 337.4 mm 46.1 x 28.4 x 3.9 inches 1173.4 x 723.4 x 100.8 mm 51.5 lbs / 23.4 kg 45.8 lbs / 20.8 kg 55LD520

(55LD520-UA) 53.4 x 35.4 x 16.6 inches 1357.0 x 901.0 x 423.0 mm 53.4 x 32.8 x 4.3 inches 1357.0 x 835.4 x 109.6 mm 80.2 lbs / 36.4 kg 72.5 lbs / 32.9 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 149 APPENDIX MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand MODELS Dimensions

(Width x Height x Depth) With stand Without stand Weight With stand Without stand Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity 42LD630

(42LD630-UA) 41.4 x 28.3 x 11.6 inches 1052.2 x 719.1 x 296.2 mm 41.5 x 25.8 x 3.5 inches 1052.2 x 657.3 x 90.8 mm 41.8 lbs / 19.0 kg 37.9 lbs / 17.2 kg 47LD630

(47LD630-UA) 44.7 x 29.8 x 10.6 inches 1137.0 x 758.0 x 270.0 mm 44.7 x 26.9 x 3.0 inches 1137.0 x 685.0 x 76.8 mm 44.7 lbs / 20.3 kg 40.3 lbs / 18.3 kg 55LD630

(55LD630-UA) 52.3 x 34.3 x 12.9 inches 1329.0 x 872.0 x 330.0 mm 52.3 x 31.3 x 3.7 inches 1329.0 x 796.0 x 96.5 mm 70.7 lbs / 32.1 kg 63.7 lbs / 28.9 kg AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%

-4 ~ 140F (-20 ~ 60C) Less than 85%

The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 150 Code

(Hexa) 00 01 02 03 06 07 08 09 0B 0F 10-19 1A 1E 28 30 40 41 43 44 45 4C 5B 58 59 61 63 71 72 79 7E 8E 8F 95 AA Function Note CH CH VOL +

VOL -

Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button

(Power On/Off) MUTE/DELETE Remote control Button INPUT Remote control Button Remote control Button TV Number Key Remote control Button 0-9 FLASHBK FAV/MARK BACK Remote control Button Remote control Button Remote control Button AV MODE

MENU ENTER Q.MENU

- (Dash)/LIST EXIT WIDGETS NETCAST BLUE YELLOW GREEN RED RATIO/ CHAR/

NUM SIMPLINK

Remote control Button Remote control Button Remote control Button Remote control Button Remote c ontrol Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button

ENERGY SAVING Remote control Button Remote control Button INFO Remote control Button Function Note

TV Remote control Button Remote control Button Remote control Button Discrete IR Code

(TV Input Selection) POWER ON Discrete IR Code POWER OFF AV1 AV2

(Only Power On) Discrete IR Code

(Only Power Off) Discrete IR Code

(AV1 Input Selection) Discrete IR Code

(AV2 Input Selection) COMPONENT1 Discrete IR Code

(Component1 Input Selection) COMPONENT2 Discrete IR Code

(Component2 Input Selection) RGB-PC Discrete IR Code Code

(Hexa) B0 B1 BA D6 C4 C5 5A D0 BF D4 D5 CE CC E9 DA 76 77 HDMI1 HDMI2 HDMI3 HDMI4 Ratio 4:3 Ratio 16:9 AF Ratio Zoom

(RGB-PC Input Selection) Discrete IR Code

(HDMI1 Input Selection) Discrete IR Code

(HDMI2 Input Selection) Discrete IR Code

(HDMI3 Input Selection) Discrete IR Code

(HDMI4 Input Selection) Discrete IR Code

(Only 4:3 Mode) Discrete IR Code

(Only 16:9 Mode) Discrete IR Code

(Only Zoom Mode) A P P E N D I X 151 APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally.

Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup Working Working Type of Connector; D-Sub 9-Pin Male Communication Parameters

Baud rate : 9600 bps (UART)

Data length : 8 bits

Parity : None

Stop bit : 1 bit

Communication code : ASCII code

Use a crossed (reverse) cable.

! NOTE

This product has command echo back in the RS-232C Command. No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 A P P E N D I X 152 RS-232C Configurations 7-Wire Configuration

(Serial female-female NULL modem cable) 3-Wire Configurations

(Not standard) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping.

1 2 3 4 MENU ENTER ENTER Select OPTION. Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1~

99. BACK Return to the previous menu. EXIT Return to TV viewing.

Real data mapping 0 A F 10 63 64 Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) Step 16 (Set ID 16) Step 99 (Set ID 99) Step 100 A P P E N D I X 153 APPENDIX Command Reference List COMMAND1 COMMAND2 DATA k 01. Power x 02. Input Select k 03. Aspect Ratio k 04. Screen Mute 05. Volume Mute k 06. Volume k Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode 14. Treble 15. Bass 16. Balance 17. Color Temperature k k k k k k k k k k x 18. Energy Saving j 19. Auto Configuration 21. Channel Add/

Del 22. Key 23. Backlight j m m

a b c d e f g h i j k l m r s t u q u b c g

(Hexadecimal) 00 - 01

P.119

P.119 00 - 01 00 - 01 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 01 00 - 01 00 - 64 00 - 64 00 - 64 00 - 64

P.119

P.119 00 - 01

P.119 00 - 64 COMMAND1 COMMAND2 DATA00 DATA01 20. Channel Tuning m a DATA02 DATA03

(Hexadecimal) major low minor

(Hexadecimal) high

(Hexadecimal)

(Hexadecimal) physical program high DATA04 major program low DATA05

(Hexadecimal)

(Hexadecimal) minor low attribute A P P E N D I X 154 Transmission / Receiving Protocol Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the set. (j, k, m or x)

[Command 2] : Second command to control the set.

[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1-99. When selecting Set ID 0, every connected the TV is con-

trolled. Set ID is indicated as decimal

(1-99) on menu and as Hexa decimal (0x0

- 0x63) on transmission /receiving proto-

col.

[DATA] : To transmit the command data. T ransmit the FF data to read status of command.

[Cr] : Carriage Return ASCII code 0x0D

[ ] : ASCII code space (0x20)

* In this model, TV will not send the status during the standby mode. OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates pres-

ent status data. If the data is data write mode, it returns the data of the PC computer.

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[OK] : Use the large character. Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[NG] : Use the large character 01. Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feed-

back presents status about each function.

* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Input Select (Command: x b) To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV1 Data 40: Component1 Data 41: Component 2 Data 60: RGB-PC Data 91: HDMI2 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

* Use the feature depending on your model. Data 90: HDMI1 Data 92: HDMI3 Data 21: AV 2 03. Aspect Ratio (Command: k c) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3 Data 02: 16:9 Data 04: Zoom Data 05: Zoom2 Data 09: Just scan Data 10: Cinema Zoom1 Data 1F: Cinema Zoom16 Data 06: Set by program Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on), Video-out Mute off Data 01: Screen mute on (Picture off) Data 10: Video-out Mute on Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD). 05. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

06. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. You can also adjust contrast in the PICTURE menu. 07. Contrast (Command: k g) To adjust screen contrast. Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. You can also adjust brightness in the PICTURE menu. 08. Brightness (Command: k h) To adjust screen brightness. Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. 09. Color (Command: k i) To adjust screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. You can also adjust tint in the PICTURE menu. 10. Tint (Command: k j) To adjust screen tint. Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 - Green: 64 (*transmit by Hexadecimal code) Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. A P P E N D I X 155 APPENDIX You can also adjust sharpness in the Picture menu. 11. Sharpness (Command: k k) To adjust screen sharpness. Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 01: OSD on Data 00: OSD off Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel con-

trols on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 01: Lock on Data 00: Lock off Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV. 14. Treble (Command: k r) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

15. Bass (Command: k s) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

16. Balance (Command: k t) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. A P P E N D I X 156 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

17. Color Temperature (Command: x u) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

*Refer to Real data mapping. 18. Energy Saving (Command: j q) To control the energy saving function. Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: Energy saving - off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

01: Energy saving - Minimum 02: Energy saving - Medium 03: Energy saving - Maximum 05: Energy saving - Screen off 19. Auto Configuration (Command: j u) To adjust picture position and minimize image shak-

ing automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

20. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. NTSC air: 02 - 45, NTSC cable: 01, 0E - 7D ATSC air: 01 - 45, ATSC cable: 01 - 87 Data 00: Physical Channel Number Data 01 & 02: Major Channel Number Data 01: High byte Data 02: Low byte Two bytes are available for the Major and Minor, normally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. Data5:

7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 0 Main 1 Sub 0 Two 1 One 0 Use 1 No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 1 2 Acknowledgement[a][ ][Set ID][ ][OK][Data00]

[Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ]

[NG][Data00][x]

Step 0 0 0 0 0 1 1 1 1 x 1 0 0 1 1 0 0 1 1 x 1 0 1 0 1 0 1 0 1 x 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved

... Reserved The table above lists the binary code which must be converted to Hexadecimal before sending. For exam-

ple: The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.

* 7th bit : For which source do you want to change the channel.

* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.

* 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type. 1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01

* Tune Command Examples:

2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 21. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

22. Key (Command: m c) To send IR remote control code. See page 155. Transmission [m][c][ ][Set ID][ ][Data][Cr]

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

When TV is in the standby mode, TV will turn on by POWER button of remote control only. 23. Backlight (Command: m g) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

A P P E N D I X 157 APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim cop-

ies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your free-

dom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other free software foundation software is cov-

ered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to free-

dom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute cop-

ies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to sur-

render the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the soft-

ware, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the origi-

nal authors' reputations. Finally, any free program is threatened constantly by soft-

ware patents. We wish to avoid the danger that redistribu-

tors of a free program will individually obtain patent licens-

es, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program"

means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modi-

fications and/or translated into another language.

(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as

"you". Activities other than copying, distribution and modifica-

tion are not covered by this license; they are outside its scope. The act of running the Program is not restricted, and the output from the program is covered only if its contents constitute a work based on the program (inde-

pendent of having been made by running the program). Whether that is true depends on what the program does. 1. You may copy and distribute verbatim copies of the program's source code as you receive it, in any medium, provided that you conspicuously and appropriately pub-

lish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty;

and give any other recipients of the program a copy of this license along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty pro-

tection in exchange for a fee. 2. You may modify your copy or copies of the program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. A P P E N D I X 158 b) You must cause any work that you distribute or pub-

lish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license. c) If the modified program normally reads commands interactively when run, you must cause it, when start-

ed running for such interactive use in the most ordi-

nary way, to print or display an announcement includ-

ing an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the pro-

gram under these conditions, and telling the user how to view a copy of this license. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably con-

sidered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distri-

bution of the whole must be on the terms of this license, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribu-

tion of derivative or collective works based on the pro-

gram. In addition, mere aggregation of another work not based on the program with the Program (or with a work based on the program) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. 3. You may copy and distribute the program (or a work based on it, under section 2) in object code or execut-

able form under the terms of sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be dis-

tributed under the terms of sections 1 and 2 above on a medium customarily used for software inter-

change; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange;

or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.

(This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an execut-

able work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major compo-

nents (compiler, kernel, and so on) of the operating system on which the executable runs, unless that com-

ponent itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this license. However, par-

ties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the program (or any work based on the program), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distributing or modifying the program or works based on it. 6. Each time you redistribute the program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restric-

tions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this license. A P P E N D I X 159 APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not lim-

ited to patent issues), conditions are imposed on you

(whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute so as to satisfy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distrib-

ute the program at all. For example, if a patent license would not permit royalty-free redistribution of the pro-

gram by all those who receive copies directly or indi-

rectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the program. If any portion of this section is held invalid or unenforce-

able under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free soft-

ware distribution system, which is implemented by pub-

lic license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent applica-

tion of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 8. If the distribution and/or use of the program is restrict-

ed in certain countries either by patents or by copy-

righted interfaces, the original copyright holder who places the program under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 9. The Free Software Foundation may publish revised and/

or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the program specifies a version number of this license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the program does not specify a version number of this license, you may choose any ver-

sion ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM

"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT IMPLIED WARRANTIES OF LIMITED TO, THE MERCHANTABILITY AND FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. FITNESS 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. A P P E N D I X 160 END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redis-

tribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and a brief idea of what it does. Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/

or modify it under the terms of the GNU General Public License as published by the Free Software Foundation;

either version 2 of the license, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY;

for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details. The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called some-

thing other than show w and show c; they could even be mouse-clicks or menu items-whatever suits your program. You should also get your employer (if you work as a pro-

grammer) or your school, if any, to sign a copyright dis-

claimer for the program, if necessary. Here is a sample;

alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program Gnomovision (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this license. A P P E N D I X 161 APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim cop-

ies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strat-

egy to use in any particular case, based on the explana-

tions below. When we speak of free software, we are referring to free-

dom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to dis-

tribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copy-

right the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or mod-

ify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the exis-

tence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free pro-

gram by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain des-

ignated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-

free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the origi-

nal library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over com-

peting non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advan-

tages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-

free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. A P P E N D I X 162 Although the Lesser General Public License is Less protec-

tive of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver-

sion of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the differ-

ence between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this license). Each license is addressed as "you". A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the library or a portion of it, either verba-

tim or with modifications and/or translated straightfor-

wardly into another language. (Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface defi-

nition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modifica-

tion are not covered by this license; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the library does and what the program that uses the library does. 1. You may copy and distribute verbatim copies of the library's complete source code as you receive it, in any medium, provided that you conspicuously and appropri-

ately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty pro-

tection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this license. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argu-

ment passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs what-

ever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined indepen-

dent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the library, and can be reasonably consid-

ered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the library, the distribu-

tion of the whole must be on the terms of this license, whose permissions for other licenses extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribu-

tion of derivative or collective works based on the library. In addition, mere aggregation of another work not based on the library with the library (or with a work based on the library) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. A P P E N D I X 163 APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irrevers-

ible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the library into a program that is not a library. 4. You may copy and distribute the library (or a portion or derivative of it, under Section 2) in object code or exe-

cutable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete cor-

responding machine-readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software inter-

change. If distribution of object code is made by offering access to copy from a designated place, then offering equiva-

lent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this license. However, linking a work that uses the library with the Library creates an executable that is a derivative of the Library (because it contains portions of the library), rather than a work that uses the library. The executable is therefore covered by this license. Section 6 states terms for distribution of such executable. When a work that uses the library uses material from a header file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if the work can be linked without the library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessories, and small mac-

ros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.

(Executable containing this object code plus portions of A P P E N D I X 164 the library will still fall under Section 6.) Otherwise, if the work is a derivative of the library, you may distribute the object code for the work under the terms of Section 6. Any executable containing that work also fall under Section 6, whether or not they are linked directly with the library itself. 6. As an exception to the sections above, you may also combine or link a "work that uses the library" with the library to produce a work containing portions of the library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engi-

neering for debugging such modifications. You must give prominent notice with each copy of the work that the library is used in it and that the Library and its use are covered by this license. You must supply a copy of this license. If the work during execution dis-

plays copyright notices, you must include the copyright notice for the library among them, as well as a reference directing the user to the copy of this license. Also, you must do one of these things:

a) Accompany the work with the complete correspond-

ing machine-readable source code for the library including whatever changes were used in the work

(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/or source code, so that the user can modify the library and then relink to produce a modified executable containing the modified library. (It is understood that the user who changes the contents of definitions files in the library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the executable, and (2) will oper-

ate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the library" must include any data and utility pro-

grams needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the library together in an executable that you distribute. 7. You may place library facilities that are a work based on the library side-by-side in a single library together with other library facilities not covered by this license, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or dis-

tribute the library except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the library is void, and will automatically terminate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the library or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the library (or any work based on the library), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distribut-

ing or modifying the library or works based on it. 10. Each time you redistribute the library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this license. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not lim-

ited to patent issues), conditions are imposed on you

(whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license. If you cannot distribute so as to satisfy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distrib-

ute the library at all. For example, if a patent license would not permit royalty-free redistribution of the library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distri-

bution of the library. If any portion of this section is held invalid or unenforce-

able under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free soft-

ware distribution system which is implemented by pub-

lic license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent applica-

tion of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a license cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 12. If the distribution and/or use of the library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the library under this license may add an explicit geograph-

ical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 13. The Free Software Foundation may publish revised and/

or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the library specifies a version number of this license which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. A P P E N D I X 165 APPENDIX it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of war-

ranty; and each file should have at least the copyright line and a pointer to where the full notice is found. one line to give the library's name and a brief idea of what it does. Copyright (C) <year> <name of author>

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the license, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a pro-

grammer) or your school, if any, to sign a copyright dis-

claimer for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the library into other free programs whose distribution conditions are incom-

patible with these, write to the author to ask for permis-

sion. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserv-

ing the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making A P P E N D I X 166 MOZILLA PUBLIC LICENSE Version 1.1

1.Definitions. 1.0.1. Commercial use means distribution or otherwise making the covered code available to a third party. Contributor means each entity that creates or con-

tributes to the creation of modifications. which, at the time of its release under this license is not already covered code governed by this license. 1.10.1. Patent claims means any patent claim(s), now owned or hereafter acquired, including without limi-

tation, method, process, and apparatus claims, in any patent licensable by grantor. Contributor version means the combination of the original code, prior modifications used by a contribu-

tor, and the modifications made by that particular contributor. 1.11. Covered code means the original code or modifi-

cations or the combination of the original code and modifications, in each case including portions there-

of. Electronic distribution mechanism means a mech-

anism generally accepted in the software develop-

ment community for the electronic transfer of data. Executable means covered code in any form other than source code. Initial developer means the individual or entity identified as the initial Developer in the Source Code notice required by exhibit A. Larger work means a work which combines covered code or portions thereof with code not governed by the terms of this License. Source code means the preferred form of the cov-

ered code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable, or source code dif-

ferential comparisons against either the original code or another well known, available covered code of the contributor's choice. The source code can be in a compressed or archival form, provided the appropri-

ate decompression or de-archiving software is wide-

ly available for no charge. 1.12. You (or Your) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this license or a future version of this license issued under section 6.1. For legal entities, You includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, control means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or ben-

eficial ownership of such entity. 1.1. 1.2. 1.3. 1.4. 1.5. 1.6. 1.7. 1.8. License means this document. 2. Source Code License. 1.8.1. Licensable means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 2.1. The initial developer grant. The initial developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:

1.9. Modifications means any addition to or deletion from the substance or structure of either the original code or any previous modifications. When covered code is released as a series of files, a modification is:

A. Any addition to or deletion from the contents of a file containing original code or previous modifica-

tions. B. Any new file that contains any part of the original code or previous modifications. 1.10. Original code means source code of computer software code which is described in the source code notice required by exhibit as original code, and a) under intellectual property rights (other than pat-

ent or trademark) licensable by initial developer to use, reproduce, modify, display, perform, subli-

cense and distribute the original code (or portions thereof) with or without modifications, and/or as part of a larger work; and

(b) under patents claims infringed by the making, using or selling of original code, to make, have made, use, practice, sell, and offer for sale, and/

or otherwise dispose of the original code (or por-

tions there of). A P P E N D I X 167 APPENDIX

(c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license.

(d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by:

i) the modification of the original code or ii) the combination of the original code with other soft-

ware or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each contributor hereby grants You a world-wide, royalty-free, non-exclusive license

(a) under intellectual property rights (other than pat-

ent or trademark) licensable by contributor, to use, reproduce, modify, display, perform, subli-

cense and distribute the modifications created by such contributor (or portions thereof) either on an unmodified basis, with other modifications, as covered code and/or as part of a larger work; and

(b) under patent claims infringed by the making, using, or selling of modifications made by that contributor either alone and/or in combination with its contributor version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) modi-

fications made by that contributor (or portions thereof); and 2) the combination of modifications made by that contributor with its contributor ver-

sion (or portions of such combination).

(c) the licenses granted in sections 2.2(a) and 2.2(b) are effective on the date contributor first makes commercial use of the covered code.

(d) Notwithstanding section 2.2(b) above, no patent license is granted: 1) for any code that contributor has deleted from the contributor version; 2) separate from the contributor version; 3) for infringements caused by: i) third party modifica-

tions of contributor version or ii) the combination of modifications made by that contributor with other software (except as part of the contributor version) or other devices; or 4) under patent claims infringed by covered code in the absence of modifications made by that contributor. 3. Distribution Obligations. 3.1. Application of license. The modifications which You create or to which you contribute are governed by the terms of this license, including without limitation section 2.2. The source code version of covered code may be distributed only under the terms of this license or a future ver-

sion of this license released under section 6.1, and you must include a copy of this license with every copy of the source code you distribute. You may not A P P E N D I X 168 offer or impose any terms on any source code ver-

sion that alters or restricts the applicable version of this license or the recipients' rights hereunder. However, you may include an additional document offering the additional rights described in section 3.5. 3.2. Availability of source code. Any modification which you create or to which you contribute must be made available in source code form under the terms of this license either on the same media as an executable version or via an accepted electronic distribution mechanism to any-

one to whom you made an executable version avail-

able; and if made available via electronic distribution mechanism, must remain available for at least twelve

(12) months after the date it initially became avail-

able, or at least six (6) months after a subsequent version of that particular modification has been made available to such recipients. You are responsi-

ble for ensuring that the source code version remains available even if the electronic distribution mecha-

nism is maintained by a third party. 3.3. Description of modifications. You must cause all covered code to which you contrib-

ute to contain a file documenting the changes You made to create that covered code and the date of any change. You must include a prominent statement that the modification is derived, directly or indirectly, from original code provided by the initial developer and including the name of the initial developer in (a) the source code, and (b) in any notice in an executable version or related documentation in which you describe the origin or ownership of the covered code. 3.4. Intellectual property matters

(a) Third party claims. If contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such contributor under sections 2.1 or 2.2, contributor must include a text file with the source code distribution titled "LEGAL"

which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If contributor obtains such knowl-

edge after the modification is made available as described in section 3.2, contributor shall promptly modify the LEGAL file in all copies contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the covered code that new knowledge has been obtained.

(b) Contributor APIs. If contributor's modifications include an application programming interface and contributor has knowl-

edge of patent licenses which are reasonably neces-

sary to implement that API, contributor must also include this information in the LEGAL file.

(c) Representations. contributor represents that, except as disclosed pur-

suant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.5. Required notices. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its struc-

ture, then You must include such notice in a location

(such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A. you must also duplicate this license in any documenta-

tion for the source code where You describe recipi-

ents' rights or ownership rights relating to covered code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obliga-

tions to one or more recipients of covered code. However, you may do so only on your own behalf, and not on behalf of the Initial developer or any contribu-

tor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by you alone, and You hereby agree to indemnify the Initial developer and every contributor for any liability incurred by the Initial developer or such contributor as a result of warranty, support, indemnity or liability terms you offer. 3.6. Distribution of executable versions. You may distribute covered code in executable form only if the requirements of section 3.1-3.5 have been met for that covered code, and if you include a notice stating that the source code version of the covered code is available under the terms of this license, including a description of how and where you have fulfilled the obligations of section 3.2. The notice must be conspicuously included in any notice in an executable version, related documentation or collat-

eral in which you describe recipients' rights relating to the covered code. You may distribute the execut-

able version of covered code or ownership rights under a license of your choice, which may contain terms different from this license, provided that you are in compliance with the terms of this license and that the license for the executable version does not attempt to limit or alter the recipient's rights in the source code version from the rights set forth in this license. If you distribute the executable version under a different license you must make it absolutely clear that any terms which differ from this license are offered by you alone, not by the Initial developer or any contributor. You hereby agree to indemnify the initial developer and every contributor for any liability incurred by the initial developer or such contributor as a result of any such terms You offer. 3.7. Larger works. You may create a larger work by combining covered code with other code not governed by the terms of this license and distribute the larger work as a single product. In such a case, you must make sure the requirements of this license are fulfilled for the cov-

ered code. 4. Inability to comply due to statute or regulation. If it is impossible for you to comply with any of the terms of this license with respect to some or all of the covered code due to statute, judicial order, or regulation then you must: (a) comply with the terms of this license to the maximum extent possible; and

(b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in section 3.4 and must be included with all distributions of the source code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipi-

ent of ordinary skill to be able to understand it. 5. Application of this license. This license applies to code to which the initial devel-

oper has attached the notice in exhibit A and to related covered code. 6. Versions of the license. 6.1. New versions. Netscape communications corporation (Netscape) may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. 6.2. Effect of new versions. Once covered code has been published under a particular version of the license, you may always con-

tinue to use it under the terms of that version. You may also choose to use such covered code under the terms of any subsequent version of the license published by netscape. No one other than netscape has the right to modify the terms applicable to cov-

ered code created under this license. 6.3. Derivative works.

"Mozilla",

"MOZILLAPL", If You create or use a modified version of this license

(which you may only do in order to apply it to code which is not already covered code governed by this license), You must (a) rename Your license so that the phrases

"MOZPL",

"Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this license) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public license and netscape Public License. (Filling in the name of the initial developer, original code or contributor in the notice described in exhibit A shall not of themselves be deemed to be modifications of this license.) A P P E N D I X 169 APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This license and the rights granted hereunder will terminate automatically if you fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All subli-

censes to the covered code which are properly granted shall survive any termination of this license. Provisions which, by their nature, must remain in effect beyond the termination of this license shall survive. 8.2. If you initiate litigation by asserting a patent infringe-

ment claim (excluding declatory judgment actions) against initial developer or a contributor (the initial developer or contributor against whom you file such action is referred to as Participant) alleging that:

(a) such participant's contributor version directly or indirectly infringes any patent, then any and all rights granted by such participant to you under sections 2.1 and/or 2.2 of this license shall, upon 60 days notice from Participant terminate pro-

spectively, unless if within 60 days after receipt of notice you either: (i) agree in writing to pay par-

ticipant a mutually agreeable reasonable royalty for your past and future use of modifications made by such participant, or (ii) withdraw your litigation claim with respect to the contributor version against such participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by participant to you under sec-

tions 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.

(b) any software, hardware, or device, other than such participant's contributor Version, directly or indi-

rectly infringes any patent, then any rights grant-

A P P E N D I X 170 ed to You by such participant under sections 2.1(b) and 2.2(b) are revoked effective as of the date you first made, used, sold, distributed, or had made, modifications made by that partici-

pant. 8.3. If you assert a patent infringement claim against participant alleging that such participant's contribu-

tor version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringe-

ment litigation, then the reasonable value of the licenses granted by such participant under sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under sections 8.1 or 8.2 above, all end user license agreements (excluding dis-

tributors and resellers) which have been validly granted by you or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. INDIRECT, SPECIAL, UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The covered code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), con-

sisting of "commercial computer software" and "com-

mercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government end users acquire covered code with only those rights set forth herein. 11. MISCELLANEOUS. This license represents the complete agreement con-

cerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to dis-

putes in which at least one party is a citizen of, or an entity chartered or registered to do business in the united states of america, any litigation relating to this License shall be subject to the jurisdiction of the federal courts of the northern district of california, with venue lying in santa clara county, california, with the losing party responsible for costs, including with-

out limitation, court costs and reasonable attorneys'

fees and expenses. The application of the united nations convention on contracts for the International sale of goods is expressly excluded. Any law or regu-

lation which provides that the language of a contract shall be construed against the drafter shall not apply to this license. 12. RESPONSIBILITY FOR CLAIMS. As between initial developer and the contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this license and you agree to work with initial developer and contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial developer may designate portions of the cov-

ered code as "Multiple-Licensed". "Multiple-

Licensed" means that the initial developer permits you to utilize portions of the covered code under your choice of the NPL or the alternative licenses, if any, specified by the initial developer in the file described in exhibit A. EXHIBIT A -Mozilla Public License. The contents of this file are subject to the Mozilla Public License Version 1.1 (the license); you may not use this file except in compliance with the License. You may obtain a copy of the license at http://www.mozilla.org/MPL/

Software distributed under the license is distributed on an

"AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the license for the specific lan-

guage governing rights and limitations under the License. The Original Code is ______________________________________

. Initial Developer of The is___________________. Portions created by ______________________ are Copyright

(C) _______________________. All Rights Reserved. the Original Code Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] license are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] license and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provi-

sions required by the [___] license. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] license."

NOTE: The text of this exhibit A may differ slightly from the text of the notices in the source code files of the original code. You should use the text of this exhibit A rather than the text found in the original code/source code for Your modifications. A P P E N D I X 171 Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive

(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :

EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950-1

; Radio Frequency Interference

; Electromagnetic Immunity

; Power Line Harmonics

; Voltage Fluctuations

; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO'99 (TCO'99 applied model only) Congratulations!

You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 01 Regulatory Information cont. Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?

The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen

(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues:

ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:

TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%

by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-

eating birds and mammals, due to the bio-accumulative*

processes when not disposed of in accordance with strict standards for disposal. TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**

Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one 02 Regulatory Information cont. exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**

Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________

* Bio-accumulative is defined as substances which accumulate in living organisms.

**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO03 (TCO03 applied model only) Congratulations!

The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:

Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields 03 Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/about/environment/html/Recycling.jsp Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-

Hndler oder einen Unternehmensvertreter von LG. 04 Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp Franais Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :

http://www.lge.com/about/environment/html/Recycling.jsp Regulatory Information cont. Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/about/environment/html/Recycling.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que 05 respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/about/environment/html/Recycling.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar Regulatory Information cont. especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-

vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian 1994 LGE

' LG ',

. 06 Regulatory Information cont. K LGE

. LG.

http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne 2002/96/EC. 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-

ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques ventuels pour l'environnement et la sant humaine. 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce produit. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di 08 un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 2.Kaikki elektroniset laitteet ovat ongelmajtett, 1. joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten

, E O 2002/96/EOK. 2.H

. 3.H

. 4.

. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 09 Regulatory Information cont. Portuguese Hungarian Polish 10 Slovak Czech Croatian Regulatory Information cont. Estonian Latvian Lithuanian 11