55LW9800UA LED LCD TV Monitor Users Manual

 

Order Number

: GETEC-C1-11-127 Test Report Number

: GETEC-E3-11-049 FCC Part 15 subpart B Page 1 / 1 APPENDIX G

: USERS MANUAL EUT Type: LED LCD TV/Monitor FCC ID.: BEJ55LW9800UA OWNERS MANUAL LED LCD TV / LCD TV /

PLASMA TV Please read this manual carefully before operating the set and retain it for future reference. LED LCD TV MODELS 42LV3700 47LV3700 55LV3700 42LV5400 47LV5400 55LV5400 LCD TV MODELS 42LK530 47LK530 55LK530 42LK550 47LK550 47LW6500 55LW6500 65LW6500 47LW9800 55LW9800 55LV9500 42LV5500 47LV5500 55LV5500 42LW5600 47LW5600 55LW5600 32LW5700 42LW5700 47LW5700 55LW5700 PLASMA TV MODELS 50PZ750 60PZ750 50PZ950 60PZ950 50PZ950U 60PZ950U P/NO : SAC34134226 (1106-REV04) www.lg.com 2 LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX and DivX Plus HD (H.264/MKV) video up to 1080p HD including premium content. DivX, DivX Certified and associated logos are trademarks of DivX, Inc. and are used under license. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668;

7,515,710; 7,519,274 NOTE

: Plasma TV

: LED LCD TV, LCD TV Image shown may differ from your TV. Your TVs OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. E N G L I S H IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. E N G L I S H Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country). It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owners manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. 4 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. E N G L I S H Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Never touch this apparatus or antenna during a thunder or lightning storm. When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen. CAUTION concerning the Power Cord (Can differ by country):

IMPORTANT SAFETY INSTRUCTIONS 5 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Grounding Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. DISCONNECTING DEVICE FROM THE MAIN POWER The power outlet must remain readily accessed in the event the device needs to be unplugged. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product. ANTENNAS Outdoor antenna grounding (Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding conductors, location of antenna Cleaning When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odours coming from the TV, unplug the power cord contact an authorized service center. Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight. E N G L I S H when exposed to certain factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV. Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or light-

headedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV. Risk of photosensitization seizure can be reduced with the following actions.

- Take frequent breaks from watching 3D TV.

- For those who have vision that is different in each eye, they should watch the TV after taking vision correction measures.

- Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the TV.

- Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time.

- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.

- Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to regain awareness of your situation before moving. 6 IMPORTANT SAFETY INSTRUCTIONS Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while youre viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. Generated Sound

"Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. E N G L I S H Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. Viewing 3D Imaging (For 3D TV)

- If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.

- Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and have a rest.

- Pregnant woman, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.

- Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.

- Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development.

- Warning for photosensitization seizure: Some viewers may experience a seizure or epilepsy IMPORTANT SAFETY INSTRUCTIONS 7 E N G L I S H If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TVs performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. For USA NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. 8 TABLE OF CONTENTS TABLE OF CONTENTS 2 LICENSES 3 IMPORTANT SAFETY INSTRUCTIONS 8 TABLE OF CONTENTS 10 ASSEMBLING AND PREPARING 10 Unpacking 13 Optional Extras 14 Parts and buttons 22 Lifting and moving the TV 22 Setting up the TV 22 - Attaching the stand 28 - Mounting on a table 30 - Mounting on a wall 31 - Tidying cables 32 REMOTE CONTROL E N G L I S H 36 Magic Motion Remote Control Functions 37 - Registering Magic Motion Remote Control 37 - How to use Magic Motion Remote Control 37 - Precautions to Take when Using the Magic Motion Remote Control 38 WATCHING TV 38 Connecting to an antenna or cable 38 - Connecting an antenna or basic cable 38 - Connecting a cable box 39 Turning the TV on for the first time 40 Watching TV 41 Accessing Home Menu 42 Managing channels 42 - Setting up channels 43 - Using favorite channels 44 - Checking current program info 45 Using additional options 45 - Adjusting aspect ratio 46 - Changing AV modes 46 - Using the input list 47 Using the quick menu 48 ENTERTAINMENT 48 Network Connection 48 - Connecting to a wired network 49 - Connecting to a wireless network 50 - When a security code is already set 53 - Network Status 54 Premium Account Function 54 - Notice 56 LG Apps function 56 - Registration LG Apps 57 - Sign in with LG Apps account 58 - Using LG Apps 59 - Using My Apps 60 Search 61 Web Browser Function 61 - Using Web Browser 62 - Browsing Favorite Websites 62 - Browsing Websites by Directly Entering Address 63 - Viewing Visited Website List 64 Smart Share Function 64 - Connecting USB storage devices 65 - Connecting DLNA DMP (Digital Living Network Alliance, Digital Media Player) 68 - Connecting DLNA DMR (Digital Living Network Alliance, Digital Media Render) 69 - Browsing files 70 - Viewing Videos 73 - DivX registration code 74 - Viewing Photos 75 - Listening to music 77 Media Link Function 77 - Media Link Connection 78 - Using Media Link 78 - Viewing Movies 79 - Using Music Section 79 - Using TV Program Section 80 - Installing Plug-Ins 81 3D IMAGING (FOR 3D TV) 81 3D Technology 81 - When watching 3D imaging 82 - When using 3D Glasses 82 - 3D Imaging Viewing Range (

82 Viewing 3D Imaging 83 - Setting 3D Imaging

) 84 CUSTOMIZING TV SETTINGS 84 The SETUP Menu 85 Customizing Settings 85 - CHANNEL Settings 86 - PICTURE Settings 91 - AUDIO Settings TABLE OF CONTENTS 9 130EXTERNAL CONTROL DEVICE SETUP 130 RS-232C Setup 130 Type of connector: D-Sub 9-Pin Male 131 RS-232C configurations 132 Communication Parameters 132 Command reference list 133 Transmission / Receiving protocol 139OPEN SOURCE LICENSE 140 GNU GENERAL PUBLIC LICENSE 144 GNU Lesser General Public License 150 Mozilla Public License 1.1 (MPL 1.1) 157 Apache License Version 2.0 159 MIT license 161 Expat license 162 The FreeType Project LICENSE 163 JPEG license 164 OpenSSL License 165 zlib/libpng License 166 Portmap license 166 Pixman license 167 X.net license 168 BSD license 170 RSA Data Security license 170 JSON license 171 MS92 license E N G L I S H 93 - TIME Settings 94 - LOCK Settings 96 - OPTION Settings 99 - NETWORK Settings 100 - SUPPORT Settings 101 MAKING CONNECTIONS 102 Connection Overview 103 Connecting to a HD receiver, DVD, or VCR player 103 - HDMI Connection 104 - DVI to HDMI Connection 105 - Component Connection 106 - Composite Connection 108 Connecting to a PC 108 - HDMI Connection 109 - DVI to HDMI Connection 110 - RGB Connection 111 Connecting to an Audio System 111 - Digital Optical Audio Connection 113 Connecting to a USB 113 Connecting to a Headphone (

114 Connecting the Wireless Media Box 115 SIMPLINK Connection 115 - Activating and Using the SIMPLINK menus

) 116 MAINTENANCE 116 Updating the TV Firmware 117 Cleaning Your TV 117 - Screen and frame 117 - Cabinet and stand 117 - Power cord 117 Preventing Image burn or Burn-in on your TV screen 118 TROUBLESHOOTING 120SPECIFICATIONS 128IR CODES 128 How to Connect 128 Remote Control IR Codes 128 - Output waveform 128 - Frame configuration 128 - Lead code 128 - Repeat code 128 - Bit description 128 - Frame interval: Tf 10 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION Do not use any unapproved items to ensure the safety and product life span. Any damages or injuries by using unapproved items are not covered by the warranty. In case of some model, the thin film on screen is a part of TV, So dont take it off. NOTE The items supplied with your product may vary depending on the model. Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. New features may be added to this TV in the future. E N G L I S H Remote control, Batteries (AAA) Owners manual, CD manual Nero MediaHome 4 Essentials CD Magic Motion Remote Control3, Strap, Batteries (AA)

(Except LV3700, LV5400, LW5700, LK530, LK550 series) Polishing cloth1

(Depending on model) Cleansing Cloths (Mitt)2

(Depending on model) 1 Gently wipe the spots on the cabinet with the polishing cloth. 2 Wipe spots on the exterior only with the cleansing cloths. Do not wipe roughly when removing stains. Excessive pressure may cause scratches or discoloration. For cleaning front frame, please slowly wipe in one direction after spraying water 1-2 times on cleansing cloths. Please remove excessive moisture after cleaning. Excessive moisture may cause water stains on the frame. 3 Sold separately for LV3700, LV5400, LW5700, LK530, LK550 series. ASSEMBLING AND PREPARING 11 Cable holder Power cord holder Ferrite Core

(Depending on model) Protection cover, Tape PZ750, PZ950, PZ950U series x 4 x 3 x 4 x 4 M4 x 26 M5 x 14.5 M4 x 28 M5 x 14.5 Screw for assembly

(50PZ750/950/950U) Screw for assembly

(60PZ750/950/950U) Power cord Wireless LAN for Broadband/DLNA Adaptor

(AN-WF100)

(PZ950, PZ950U series) 3D Glasses1 (AG-S250)

(PZ950U series) LV3700, LV5400, LV5500, LV9500, LW5600, LW5700, LW6500, LW9800 series x 8 x 8 x 8 M4 x 12 M4 x 16 M4 x 16 E N G L I S H Screw for assembly

(LV3700, LV5400, LV5500, LW5600, LW5700 series, 47/55LW6500) Screw for assembly

(65LW6500) Screw for assembly

(LV9500, LW9800 series) Screw for fixing

(32LW5700) Composite gender cable Component gender cable Cable holder

(Depending on model) FPR 3D Glasses1

(LW5600, LW5700, LW6500, LW9800 series) 1 The number of 3D glasses may differ depending on the model or country. Wireless LAN for Broadband/DLNA Adaptor

(AN-WF100)

(Except LV9500, LW9800 series) 12 ASSEMBLING AND PREPARING LK530, LK550 series x 8 M4 x 20 Screw for assembly Protection cover Power cord Screw for fixing (42LK530, 42LK550) Composite gender cable Component gender cable NOTE

) How to use the ferrite core

Wireless LAN for Broadband/DLNA Adaptor

(AN-WF100) E N G L I S H 1 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable on the ferrite core once. Place the ferrite core close to the TV.

[to an External device]

[Figure 1]

[to the TV]

[Cross Section of Ferrite Core]

2 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

[to an External device]

[Figure 2]

[to the TV]

[Cross Section of Ferrite Core]

3 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug]

[Figure 3]

[to the TV]

[Cross Section of Ferrite Core]

If there is one ferrite core, follow as shown in Figure 1. If there are two ferrite cores, follow as shown in Figures 1 and 2. If there are three ferrite cores, follow as shown in Figures 1 and 3. If there are four ferrite cores, follow as shown in Figures 1, 2 and 3.

) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

(0.39 inch) thick and 18 mm (0.7 inch) width.

*A 10 mm (0.39 inch)

*B 18 mm (0.7 inch) ASSEMBLING AND PREPARING 13 Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV. Wireless Media Box1

(AN-WL100W) 3D Glasses2

(AG-S230, AG-S250, AG-S270) Wireless LAN for Broadband /DLNA Adaptor3

(AN-WF100) Magic Motion Remote

(AN-MR200) D-sub 15 pin signal cable4 FPR 3D Glasses5

(AG-F2**) 1 Supports for LV3700, LV5400, LV5500, LV9500, LW5600, LW5700, LW6500, LW9800, PZ750, PZ950, PZ950U series 2 Supports for PZ750, PZ950, PZ950U series 3 Unnecessary for LV9500, LW9800 series 4 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable with a ferrite core to maintain standards compliance for the product. 5 Supports for LW5600, LW5700, LW6500, LW9800 series The model name or design may be changed depending on the upgrade of product functions, manufacturers circumstances or policies. E N G L I S H 18 ASSEMBLING AND PREPARING LV9500, LW9800 series E N G L I S H Rear Connection panel (see p.101) Touch button2 Description

/ I Turns the power on or off. Changes the input source. Accesses the Home menu, or saves your input and exits the menus. Selects the highlighted menu option or confirms an input. Adjusts the volume level. Scrolls through the saved channels. INPUT HOME ENTER VOL +

v CH ^

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 All of the buttons are touch sensitive and can be operated through simple touch with your finger. NOTE You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP. ASSEMBLING AND PREPARING 25 LV9500, LW9800 series 4 Secure the TV and the stand with the 4 screws. 1 Lay the TV with the screen side down on a flat Screw for assembly Number of screws surface. M4 x 16 4 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the parts of the stand body with the stand base of the TV. Screw for assembly Number of screws M4 x 16 4 3 Assemble the parts of the stand rear cover with the TV. CAUTION Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. To detach the stand, 1 Lay the TV with the screen side down on a flat surface. 2 Remove the 4 screws and pull the stand away from the TV. E N G L I S H 28 ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a table 1 Lift and tilt the TV into its upright position on a table.

- Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation.

(For 32LW5700, 42LK530, 42LK550) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. 2 Connect the power cord to a wall outlet. CAUTION Do not place the TV near or on sources of heat, as this may result in fire or other damage. E N G L I S H NOTE Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. WARNING To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ASSEMBLING AND PREPARING 29 Securing the TV to a wall (optional) Using the Kensington security system (optional) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. NOTE The Kensington security system is optional. You can obtain additional accessories from your local dealer. E N G L I S H Make sure that children do not climb on or CAUTION hang on the TV. NOTE Use a platform or cabinet that is strong and large enough to support the TV securely. Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer. 30 ASSEMBLING AND PREPARING Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 42/47/55LV3700 42/47/55LV5400 42/47/55LV5500 55LV9500 42/47/55LW5600 42/47/55LW5700 47/55LW6500 47/55LW9800 55LK530 400 x 400 M6 4 LSW400B, LSW400BG, DSW400BG 65LW6500 600 x 400 M8 4 LSW600B Model VESA Standard screw Number of screws Wall mount bracket

(optional) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. E N G L I S H Model 50PZ750 50PZ950 50PZ950U 400 x 400 VESA Standard screw M6 Number of screws Wall mount bracket

(optional) 4 PSW400B, PSW400BG, DSW400BG Model VESA 32LW5700 200 x 100 Standard screw M4 4 Number of screws Wall mount bracket

(optional) 60PZ750 60PZ950 60PZ950U 600 x 400 M8 4 PSW600B, PSW600BG 42/47LK550 42/47LK530 200 x 200 M6 4 LSW100B, LSW100BG LSW200B, LSW200BG CAUTION Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount bracket and contact the local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the TV and void your warranty. Use the screws and wall mount bracket that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE Use the screws that are listed on the VESA standard screw specifications. The wall mount kit includes an installation manual and necessary parts. The wall mount bracket is optional. You can obtain additional accessories from your local dealer. The length of screws may differ depending on the wall mount. Make sure to use the proper length. For more information, refer to the manual supplied with the wall mount bracket. Connecting a cable box Connect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 ). 38 WATCHING TV WATCHING TV Connecting to an antenna or cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Connecting an antenna or basic cable Connect the TV to a wall antenna socket with an RF cable (75 ). E N G L I S H Make sure not to bend the copper wire of CAUTION the RF cable. NOTE Use a signal splitter to use more than 2 TVs. Visit http://lgknowledgebase.com for more information about the antenna and cable connection. Search for antenna. Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. WATCHING TV 39 NOTE To display images in the best quality for your home environment, select Home Use. Store Demo is suitable for the retail environment. If you select Store Demo, the any customized settings will switch back to the default settings of Store Demo in 5 minutes. Power Indicator feature is disabled in Store Demo mode. 4 When the basic settings are complete, press ENTER. NOTE If you do not complete the Initial setting, it will appear whenever the TV turns on. Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press the power button on the remote control. E N G L I S H Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE You can also access Initial Setting by accessing OPTION in the Home menu -

SETUP. 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Language Mode Setting Power Indicator Time Zone Network Setting Auto Tuning Selects a language to display. Selects Home Use for the home environment. Sets the standby light.

(For LED LCD TV) Selects the time zone and daylight saving. Sets your network to enable network-related feature on the TV. (For LV9500, LW9800 series) Scans and saves available channels automatically. 40 WATCHING TV Watching TV 1 In Standby mode, press the power button on the remote control to turn the TV on. 2 Press INPUT and select TV. 3 Control the TV using the following buttons while you are watching TV. Button CH (^, v) LIST 0 9 Description Scrolls through saved channels. Selects a channel on the saved or recent watched channel list. Selects a channel by entering numbers. VOL (+, -) Adjusts the volume level. MUTE Mutes all sounds. AV MODE1 Selects an AV mode (See p.46). Q.MENU FLASHBK RATIO FREEZE

) Accesses the quick menus (See p.47). Alternates between the last two channels selected. Resizes an image (See p.45). Freezes the current frame while you are watching TV 1 Each AV mode has the optimized image and sound settings. If you select Off, the image and sound settings will be restored to the previously customized settings. 4 To turn the TV off, press the power button on the remote control. The TV switches to Standby mode. E N G L I S H 48 ENTERTAINMENT ENTERTAINMENT Network Connection Connecting to a wired network Connect the TV to a local area network (LAN) via the LAN port as shown in the following illustration and set up the network settings. If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual. To set up the network settings: (Even if your TV has already connected automatically, running setup again will not harm anything) 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to NETWORK and press ENTER. 4 Press the Navigation buttons to select Network Setting and press ENTER. 5 If wired and wireless are simultaneously connected, press the Navigation buttons to select Wired and press ENTER. 6 If you have already set the Network Setting, select Resetting. The new connection settings will reset the current network settings. E N G L I S H Do not connect a modular phone cable to CAUTION the LAN port. Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider. After connecting the LAN port, use the Premium or LG Apps menu.

7 Select IP Auto Setting or IP Manual Setting. If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually. IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network

(LAN) via wired connection, the TV will automatically be allocated an IP address. If youre using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined. IP Manual Setting: Select if there is no DHCP server on the network or you want to set the IP address manually.

8 When you are finished, press EXIT. NOTE Connecting to a wireless network ENTERTAINMENT 49 If you want to access the Internet directly on your TV, the broadband internet connection should always be on. If you cannot access the Internet, check the network conditions from a PC on your network. When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. If you do not complete the network settings, the network may not work properly. The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect to a wireless LAN network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings. Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. The easiest method is the WPS button method (Third method in this section).

(LV9500, LW9800 series: Built-in the Wi-Fi Module, Unnecessary Wireless LAN for Broadband/DLNA adaptor setup) E N G L I S H NOTE For enjoying pictures, music, or video stored on a PC using the router, a wired connection is recommended. When the wireless port of the router is used, there may be restrictions on some functions. It is recommended that an Access Point

(AP) be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference. 50 ENTERTAINMENT To set up the network settings, 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to NETWORK and press ENTER. 4 Press the Navigation buttons to select Network Setting and press ENTER. 5 Press the Navigation buttons to select Wireless and press ENTER. 6 If you already set Network Setting, select Resetting and press ENTER. The new connection settings resets the current network settings. 7 Press the Navigation buttons to select Setting from the AP list and press ENTER.

- Scan the all available AP (Access Point) or wireless routers within range and display them as a list. When a security code is already set PIN (Personal Identification Number) If your router is set to use a PIN, use the following instructions. 1 Repeat step 1-7 on Connecting to a wireless network. 2 Press the Red button to connect the access point with PIN mode. 3 You can see the Network ID and Security Key on your TV screen. Enter the PIN number to your device. PIN number is the unique 8 digit number of the dongle. 4 Press ENTER to select Connect. E N G L I S H 5 Repeat step 6-7 on Connecting to a wired network. 8 Press the Navigation buttons to select an AP

(Access Point) or wireless router on the list. (If your AP is secured, you will prompted for the key. And press ENTER. 9 Press the Number buttons to Input the security key of AP and press ENTER. WPS (Wi-Fi Protected Setup) If your router or AP has a WPS button, it is the easiest connection method. You simply press the button on the router and then select the WPS on the TV within 120 seconds. 1 Repeat step 1-7 on Connecting to a wireless network. 2 Press the Navigation buttons to select the Simple setting (WPS-button mode). 3 Press the WPS button on your router. 4 Go back to the TV and select Connect. 5 Repeat step 6-7 on Connecting to a wired network. Ad-hoc Mode Ad-hoc mode allows the TV to use a wireless to connect to a computer without using a router or access point. ENTERTAINMENT 51 5 Press the Navigation buttons to type in an IP address and press ENTER. Option Description PC Setting TV Setting Internet Protocol(TCP/IP) of PC needs to be set manually. IP address, Subnet Mask, and default Gateway can be set with your own discretion.

- e.g.) IP address: 192.168.0.1 /

Subnet Mask: 255.255.255.0 /

default Gateway:

192.168.0.10 Verify IP address and gateway of PC. Input Gateway address of PC to IP Address, and IP Address of PC to Gateway, and select Enter.

- e.g.) IP address: 192.168.0.10

/ Subnet Mask: 255.255.255.0

/ default Gateway:

192.168.0.1 6 Press the Navigation buttons to select Close after Network setting is completed. 1 Repeat step 1-5 on Connecting to a wireless 7 Press the ENTER. network. 2 Press the Navigation buttons to select Setting Ad-hoc network and press ENTER. 3 Press the Navigation buttons to select Enter and press ENTER. 4 Press ENTER to select Connect to connect Adhoc network.

- You can see the Network ID and Security Key on your TV screen.

- Enter this Network ID and Security Key to your device.

- When needed, you can change the setting information using the Red button. NOTE When searching for wireless networks on your PC using ad-hoc, the TV is named LGTV10. LGTV10 that appears in the list. (Select the same name as the network ID that appears on your TV screen.) E N G L I S H 52 ENTERTAINMENT Tips for Network setting Use a standard LAN cable with this TV. Cat5 or better with a RJ45 connector. Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. LG is not responsible for any malfunction of the TV and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment. LG is not responsible for problems within your internet connection. Some content available through the network connection may not be compatible with the TV. If you have questions about such content, please contact the producer of the content. You may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. Any fees charged by an ISP including, without limitation, connection charges are your responsibility. A 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this TV. If your internet service does not allow for such a connection, you will not be able to connect the TV. A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this TV or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-

scription to one device, this TV may not be E N G L I S H allowed to connect when a PC is already connected.) The use of a Router may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. The wireless network operates at 2.4 GHz radio frequencies that are also used by other household devices such as cordless telephone, Bluetooth devices, microwave oven, and can be affected by interference from them. It can be interrupted by the device using 5 Ghz radio frequencies. It is same device with LG wireless media box, cordless telephone, other Wi-Fi device. It may decrease the service speed using Wireless network by surrounding wireless condition. Turn off all unused network equipment in your local home network. Some devices may generate network traffic. In some instances, placing the access point or wireless router higher up away from the floor may improve the reception. The reception quality over wireless depends on many factors such as type of the access point, distance between the TV and access point, and the location of the TV. To connect wireless AP, an AP that supports the wireless connection is necessary, and the wireless connection function of the AP needs to be activated. Please enquire to the AP supplier for the possibility of AP wireless connections. Please verify the security settings of AP SSID for wireless AP connection, and enquire to the AP supplier for the AP SSID security settings. The TV can become slower or malfunction with wrong settings of network equipments (wired/

wireless router, hub, etc). Please install correctly by referring to the manual of the equipment, and set the network. When AP is set to include 802.11 n, and if Encryption is designated as WEP(64/128bit) or WPA(TKIP/AES), the connection may not be possible. There may be different connection methods according to the AP manufacturers. Network Status 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to NETWORK and press ENTER. 4 Press the Navigation buttons to select Network Status. 5 Press ENTER to check the network status. Option Setting Test Close Description Return to the network setting menu or wireless network setting type menu. Test the current network status after setting the network. Return to the previous menu. ENTERTAINMENT 53 E N G L I S H 64 ENTERTAINMENT Smart Share Function Tips for using USB storage devices Connecting USB storage devices Connect USB storage devices such as a USB flash drive or external hard drive to the TV and use multimedia features (See Browsing files on page 69). Connect a USB flash drive or USB memory card reader to the TV as shown in the following illustration. E N G L I S H To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files. 1 Press Q.MENU to access the quick menus. 2 Press the Navigation buttons to scroll to USB Device and press ENTER. 3 Disconnect the USB storage device only when the message says that it is safe to remove. CAUTION Do not turn the TV off or remove a USB storage device while the USB storage device is connected to the TV, as this could result in loss of files or damage to the USB storage device. Back up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty. The TV recognizes only a USB storage device. If you connect a USB storage device to the TV through a USB hub, your TV may not recognize the USB storage device. The TV may not recognize a USB storage device that requires a special driver. The recognition speed of a USB storage device may differ depending on the device. Only use a USB storage device which has normal music or image files. Use only USB storage devices that are formatted as a FAT 32 or NTFS file system. You may need to connect a USB storage device to an external power supply with a power adapter. If the TV does not recognize a connected USB storage device, replace the cable and try again. Do not use an excessively long cable. The TV does not support some USB storage devices properly. You can use a multi-partition (up to 4) USB storage device. You can use up to 4 USB storage devices at a time by using a USB multi-card reader. The file alignment method of a USB storage device is similar to the one of Window XP. You cannot create or delete a folder saved in a USB storage device directly on the TV. The number of characters for a file name is up to 100 English characters. Up to 1000 including folders and files can be recognized. If there are too many folders and files in one folder, it may not operate properly. The recommended capacity for a USB external hard disk is 1 TB or less and for a USB storage device is 32 GB or less. If a USB external hard disk with the Energy Saving feature does not work, turn the USB external hard disk off and on again to make it work properly. For more information, refer to the user manual of the USB external hard disk. USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list. The electrostatic can cause USB devices malfunction. In this case, USB Device has to be plugged again. Connecting DLNA DMP (Digital Living Network Alliance, Digital Media Player) This TV can display and play many types of movie, photo and music files from your DLNA server and has been certified by DLNA. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through a wired or wireless network in the home. The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA server software or other DLNA compatible device is connected to this TV, some setting changes of software or other devices may be required. Please refer to the operating instructions for the software or device for more information. Please refer to Smart Share Function for additional information on supported file types and other instructions. ENTERTAINMENT 65 NOTE The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for sharing files and folders to this TV. The supplied Nero MediaHome 4 Essentials software does not support following functions: Transcoding, Remote UI, TV control, Internet services and Apple iTunes This manual explains operations with the English version of Nero MediaHome 4 Essentials as examples. Follow the explanation referring to the actual operations of your language version. If there are too many folders and files in one folder, it may not operate properly. For the DLNA option, use the Nero MediaHome program that is provided with the TV. However, we cannot guarantee that third party program will work perfectly. You can select a channel while viewing the small preview channel list on your TV screen. Check your network settings when the DLNA option does not work properly. If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may not work properly. In this case, exit Nero Media Home and restart the program. You can download the latest version of Nero Media Home by clicking the question mark at the bottom-left of the program. When the network is unstable, the device may be slower or may need to load during playback. When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported. When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from the original. When more than one TV is connected to a single server in DLNA mode, a file may not play properly, depending on the server performance. If the play time information is not provided by the server, it is displayed as - -."

E N G L I S H 7 Click Typical and click Next. The installation process is started. 8 If you want to take part in the anonymous collection of data, select the check box and click the Next button. 9 Click the Exit button to complete the installation. Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. 2 Click Network icon on the left and define your network name in the Network name field. The Network name you enter will be recognized by your TV. 3 Click Shares icon on the left. 4 Click Local Folders tab on the Shared screen. 5 Click Add icon to open the Browse Folder window. 6 Select the folder containing the files you want to share. The selected folder is added to the list of shared folders. 7 Click Start Server icon to start the server. NOTE If the shared folders or files are not displayed on the TV, click the folder on the Local Folders tab and click Rescan Folder at the More button. Visit http://www.nero.com for more information and software tools. 66 ENTERTAINMENT Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is an easy to use DLNA server software for Windows. Computer requirements for Nero MediaHome 4 Essentials Windows XP (Service Pack 2 or higher), Windows Vista (no Service Pack required), Windows XP Media Center Edition 2005

(Service Pack 2 or higher), Windows Server 2003 (Service Pack 1 or higher) Windows 7 Home Premium, Professional, Enterprise or Ultimate (32 and 64-bit) Windows Vista 64-bit edition (application runs in 32-bit mode) Windows 7 64-bit edition (application runs in 32-bit mode) Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome stand-

alone 1.2 GHz Intel Pentium III or AMD Sempron 2200+ processors Memory: 256 MB RAM Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16-bit color settings Windows Internet Explorer 6.0 or higher DirectX 9.0c revision 30 (August 2006) or higher Network environment: 100 Mb Ethernet, WLAN

(IEEE 802.11g), or faster 1 Start up your computer. 2 Close all Microsoft Windows programs and exit any anti-virus software that may be running. 3 Insert the Nero MediaHome 4 Essentials CDROM into your computers CD-ROM drive. 4 Click Nero MediaHome 4 Essentials. The installation wizard will appear. 5 Click the Next button to display the serial number input screen. Click Next to go to the next step. 6 If you accept all conditions, click I accept the License Conditions check box and click Next. Installation is not possible without this agreement. E N G L I S H ENTERTAINMENT 67 The playback and operating quality of the Smart Share function may be affected by your home network condition. The files from removable media such as USB drive, DVD-drive etc. on your media server may not share properly. When playing the Media through DLNA connection, it does not support files protected by DRM. Up to 1000 including folders and files can be recognized. If there are too many folders and files in one folder, it may not operate properly. The DLNA function is not available in some routers which do not support multicasting. For more information, refer to your router manual or contact the manufacturer. E N G L I S H Playing Shared Media You can display and play movie, photo and music content stored on your computer or other DLNA media servers. 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to Smart Share and press ENTER. 3 Press the Navigation buttons to scroll to the device you want and press ENTER. 4 Press the Navigation buttons to select DLNA. Depending on the media server, this TV may need to get the permission from the server. Tips for using DLNA DMP To play the file on the media server, the TV and the media server must be connected to the same access point. File requirements and playback functions on the Smart Share may differ depending on the media server used. There may be some restrictions by file features and the media server that restrict playback. Movie thumbnail is only supported when DLNA server supports a Movie thumbnail. If there is an unplayable music file in the Smart Share menu, the TV will skip the file and play next file. Files in a folder can be played only when they are of the same type. The file information indicated on the screen may not always correct for music and movie files in Smart Share menu. This TV only supports movie subtitle files supplied by Nero MediaHome 4. The subtitle file name and movie file name have to be the same and located in the same folder. If subtitle files have been added after a directory has been indexed already, the user has to remove and re-add the folder to the list of shares. The DRM/*.tp/*.trp file in DLNA server is not played while Movie List is in operation. MPO files are not played when Photo List is in operation. 68 ENTERTAINMENT Connecting DLNA DMR (Digital Living Network Alliance, Digital Media Render) This supports remote playing of media files. Media from a compatible device (Windows 7, Mobile Phone with PlayTo, or other compatible DLNA-

DMC device) can be pushed to the TV. The DMR function only works properly when the TV and PC are on the same local network. 1 To play a file, select the file by using the Remote Play feature in Windows 7. To do this, right-click on the file you want to play. 2 You can play a file only on a single TV set or device even though multiple devices are connected. The playback speed depends on the network status. E N G L I S H NOTE devices. Subtitle is supported only on some DMC The DMR function may not work properly in a wireless network. The seek function of the DMC only works on video files. The DMR is not available when another function is operating (recording, playback or Smart Share work etc.). Refer to the owners manual of the mobile phone or other device to find out how to use it to play a file. You can change the name of a connected TV by double-clicking the item you want to change in Control Panel>Network and Internet>View network computers and devices (For Windows 7). You cannot change the name of a TV while DMR media is playing. Change it when playback is stopped. 3D IMAGING (FOR 3D TV) 81 3D IMAGING (FOR 3D TV) 3D Technology

) This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format. When watching 3D imaging To watch the TV in 3D, you must put on your 3D glasses. For best results, you should wear LG Brand 3D glasses. The 3D imaging may not display properly when using another brand of 3D glasses. Please see the 3D glasses manual for instructions on how to use the 3D glasses. When watching 2D images, it is recommended to take off the 3D glasses. If you watch 2D images with the 3D glasses on, you may see distorted images.

) We recommend that you maintain a distance of at least twice the screen diagonal length when watching 3D videos. After powering on the TV, a few seconds may be needed for your TV to calibrate. The TV may flicker slightly if the 3D imaging is displayed under 3 wavelength fluorescent light

(50 Hz - 60 Hz) or magnetic fluorescent lamp

(50Hz - 60 Hz). In such instances, it is recommended to turn the lights off. If there is an obstacle between the TV and the 3D glasses, the 3D imaging may not display properly. Do not use the TV in close proximity to other electronic equipments and RF equipments. The 3D imaging may not display if it is viewed while you are lying down. It may take a moment for you to see the 3D imaging if you look away from the TV and then revert your eyes back to the 3D program. E N G L I S H 82 3D IMAGING (FOR 3D TV) When using 3D Glasses Viewing 3D Imaging Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles. Do not store the 3D glasses in hot or cold locations. Do not drop objects onto the 3D glasses. Do not drop or bend the glasses. Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth. Shake off any dust before using the cloth since the glasses are easily scratched. A communication failure may occur if the glasses are near electronic devices that use the same bandwidth (2.4 GHz), such as a microwave oven or wireless LAN product. 3D Imaging Viewing Range (

) TV size, viewing angle & other circumstances may change the viewing distance and the angle of view. Viewing Distance Maximum Viewing Distance 2 m - 7 m

(6.5 ft - 22.9 ft) 10 m

(32.8 ft) E N G L I S H 1 Play the video produced in 3D. 2 Press 3D to watch 3D imaging. 3 Wear the 3D glasses. 4 Press the Navigation buttons to scroll the OK and press ENTER. 5 Press the Navigation buttons to select the shape Description Changed from 2D imaging to 3D imaging. 2D-to-3D converted videos may appear less realistic than titles originally produced as 3D videos. and press ENTER. Mode 2D 3D Side by Side Top & Bottom Checker Board Frame Sequential 6 Press 3D button to 2D Off or 3D Off. Option Description 3D 2D 3D Off 2D 3D Cancel Displays images in 2D without any 3D effects. Displays images in original format. Displays images in 3D. Close the pop-up window. 3D IMAGING (FOR 3D TV) 83 Setting 3D Imaging 1 Press the 3D OPTION while viewing 3D imaging. A pop-up window will appear. 2 Press the Navigation buttons to scroll to one of the following options and press ENTER. Set Video. Allows you to change Video settings (Refer to PICTURE Settings on page 86). Set Audio. Allows you to change Audio settings (Refer to AUDIO Settings on page 91). Some menus may not work while viewing CAUTION 3D imaging. The 3D imaging is disabled automatically when switching input source or DTV channel. The screen may not be displayed properly if you view 2D images in 3D imaging mode. 3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to the TV. For *mpo files (3D camera files), the 3D imaging mode is enabled automatically. NOTE

If viewing 3D imaging, Power indicator is turned off automatically. You can only choose Off or Cinema with the AV MODE button on the remote control. Energy Saving is disabled while playing in Home menu is not available while playing in 3D. 3D. You cannot enter the Home menu while watching 3D imaging. E N G L I S H 3D Mode Setting

(Depending on Option model) Description 3D Picture Size 3D Picture Correction 3D Depth Cuts off the outer edges of the picture and stretch it to fit the full screen in 3D mode. Select Left/Right or Right/Left. Select the screen with 3D video with better visibility. Adjusts the stereoscopic effect of the 3D image converted from 2D image. 3D Viewpoint Moves the 3D image to front and back to adjust the 3D perspective view. 3D Picture Balance Adjusts the color and brightness difference between the right and left sides of the picture in 3D mode. 3D Optimization Optimizes the 3D image screen for the viewing environment. CUSTOMIZING TV SETTINGS 99 NETWORK Settings 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to NETWORK and press ENTER. 4 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.

- To return to the previous level, press BACK. 5 When you are finished, press EXIT. The available network settings are described in the following. Setting Description Network Setting Configure the network settings (See p.48). Network Status Display the network status (See p.53). Smart TV Setting Set the region for which weather forecast is provided and manage the IDs added to the TV. Setting Country Setting Weather Effect Set the country for premium services. Different premium services are provided depending on the country you set. Sets the region for the weather to be displayed on the background of the premium service. Select your region. Premium Version Display the version of the premium service. ID Management Manage the login history of the IDs added to the TV. Reset Delete all IDs added and applications installed on the TV. Please be aware that all your paid applications may be deleted. E N G L I S H Legal Notice Display the Legal notice (See p.55). ESN (Depending on model) View the supplied Netfilx Electronic Serial Number (ESN) 100 CUSTOMIZING TV SETTINGS SUPPORT Settings 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to SUPPORT and press ENTER. 4 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.

- To return to the previous level, press BACK. 5 When you are finished, press EXIT. The available support settings are described in the following. Setting Description Software Update Update the TV with the latest firmware. Picture Test Sound Test Executes picture or built-in melody sound tests. If this test has an error, select Yes. You will see product or service information. If this test has no errors, check the connection status of external devices and refer to the manual of external devices. Product/Service Info. Shows the product or service information. Customer Service Center can differ by country. Initialization of Premium Initialize the premium menu if an error occurs while updating the premium menu. Then, the TV automatically switches off and then back on. E N G L I S H MAKING CONNECTIONS 101 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information on external devices connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. The external device connection may differ from the model. Connect external devices to the TV regardless of the order of the TV port. E N G L I S H 102 MAKING CONNECTIONS Connection Overview Connect various external devices to the ports on the TV back panel. 1 Find an external device you want to connect to your TV as shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. E N G L I S H HDMI See p.103, p.108 DVI See p.104, p.109 Component See p.105 Composite See p.106 RGB See p.110 Memory storage See p.113 Memory card reader See p.113 Digital See p.111 NOTE If you connect a gaming device to the TV, use the cable supplied with the gaming device. Refer to the external equipments manual for operating instructions. MAKING CONNECTIONS 115 No. Description HDD recordings playback: Controls the recording stored in HDD. Audio out to home theater speaker or Audio out to TV: Changes the audio output between Home theater speaker and TV speaker.

- A check mark appears in front of the selected device.

- Available devices display in a bright color.

- Unavailable devices display in grey. 4 Control the selected AV device. Function Direct Play Select AV device Disc playback Description After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Enables you to select one of the AV devices connected to the TV. Control connected AV devices by pressing the Navigation buttons, ENTER, , , , and . Power off all devices When you power off the TV, all connected devices are turned off. Sync Power on When the equipment with SIMPLINK function connected HDMI terminal starts to play, the TV will automatically turn on. Switch audio-

out Offers an easy way to switch audioout. NOTE E N G L I S H If you change the input source by pressing INPUT, the progressing function of the SIMPLINK device will stop. If you select a device that has the home theater feature, the sound output automatically switches to the home theater speaker and the TV speaker turns off. If a connected SIMPLINK home theater system does not play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the rear of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an optical cable. SIMPLINK Connection Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. This TV may work with the devices that support HDMI-CEC, but only devices with the logo are fully supported. Connect one end of the HDMI cable to the HDMI/

DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. NOTE If the connected device does not support HDMI-CEC, the SIMPLINK feature is unavailable. To operate SIMPLINK, you should use an High Speed HDMI cable with the CEC

(Consumer Electronics Control) function. SIMPLINK may not work properly if you a third-party device that has an HDMI-CEC function. Activating and Using the SIMPLINK menus 1 Press SIMPINK to access the SIMPLINK menus. 2 Press the Navigation buttons to select to On. 3 Press the Navigation buttons to scroll to one of the devices and press ENTER. 1 2 3 4 5 No. Description Displays the previously viewed TV channel. Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen. Controls the connected VCR. 116 MAINTENANCE MAINTENANCE Update and clean your TV regularly to keep the best performance and to extend the product lifespan. Updating the TV Firmware Download and install the latest firmware by connecting to the firmware update server to enhance or change the product function, or add new features. The firmware update may not work properly depending on the Internet environment. If so, you may obtain the latest firmware update from the authorized LG Electronics service center. To check the current firmware version or update the firmware, 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to SUPPORT and press ENTER. 4 Press the Navigation buttons to scroll to Software Update and press ENTER. The current firmware version displays. 5 Select Check Update Version to check a new firmware version manually. E N G L I S H NSU (Network Software Update):

When software update is on, the TV will automatically check for software updates. A pop-up window will appear on the screen when an update is available. NOTE While updating the firmware, do not disconnect the LAN cable, turn the TV off, or unplug the power cord. Premium service is disabled while the software is being updated through NSU. 6 When the update is complete, the TV will automatically restart in 5 seconds. You may need to reset some CHANNEL, PICTURE, or AUDIO menus. NOTE You cannot downgrade back to an older firmware version. The period of time for the firmware update may be different depending on the firmware size or network condition. If the firmware update download fails when using wireless, temporarily connect a cable directly to your router. If it still does not download, contact customer service. Cleaning Your TV Power cord MAINTENANCE 117 Remove the accumulated dust or dirt on the power cord regularly. Preventing Image burn or Burn-in on your TV screen If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn. E N G L I S H CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions. Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screens finish and cause discoloration. Cabinet and stand To remove dust or light dirt, wipe the cabinet with a dry, clean, and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. Then wipe immediately with a dry cloth. CAUTION Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Do not use any chemicals as this may deteriorate the surface. 118 TROUBLESHOOTING TROUBLESHOOTING General Problem Cannot control the TV with the remote control. No image display and no sound is produced. Image appears slowly when the TV turns on. Cannot connect external devices. The TV turns off suddenly. Resolution Check the remote control sensor on the product and try again. Check if there is any obstacle between the product and the remote control. to Check if the batteries are still working and properly installed (

to

, Check if the appropriate input mode such as TV or VCR is set for using the

). remote control. Check if the product is turned on. Check if the power cord is connected to a wall outlet. Check if there is a problem in the wall outlet by connecting other products. The image is muted during the product startup process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If the image still does not appear, contact the authorized service center in your local area. Refer to the Connection overview and connect an external device. Check the power control settings. The power supply may be interrupted. Check if the Auto sleep feature is activated in the Time settings. Refer to the If there is no signal while the TV is on, the TV will turn off automatically after Sleep Timer. 15 minutes of inactivity. E N G L I S H Audio Problem No sound is produced while images are displaying. Resolution Press VOL + or - button. Check if the sound is muted by pressing MUTE. Scroll to other channels. There may a problem with the broadcast. Check if the audio cables are connected properly. Check if the TV Speaker feature is activated in the menu option. No output from one of the speakers Adjust Balance in the menu option. Unusual sound from inside the TV is produced. A change in ambient humidity or temperature may result in an unusual noise when the product turns on or off. There is no problem with your product. TROUBLESHOOTING 119 Video Problem An image displays in black and white or the color quality is poor. Horizontal or vertical bars appears or images blur Lines or streaks appear on images. Resolution Adjust the color setting in the menu option. Keep a sufficient distance between this product and other electronic products. Scroll to other channels. There may a problem with the broadcast. Check if there are local interferences such as an electrical appliance or power tool. Check the antenna or aim the antenna to the proper direction. Afterimages (ghosts) appear when the product turns off Pixels may have been damaged from a fixed image displayed for a long time

(image burn). Use a screen saver to prevent the pixel damage on the screen. The power is on but the screen appears extremely dark. No Signal appears on the screen. Black spots appear on the screen. The display offset is wrong. Thin lines appear in the background of the screen. Horizontal noises appear or characters blur. The reception on some channels is poor. Adjust the brightness and contrast in the menu option. Check if the signal cable is connected between the TV and products properly. Check the selected input source by pressing INPUT. Several pixels in red, green, white, or black may appear on the screen that can attribute to the characteristics of the LCD panel. This is normal. Adjust the position setting in the Picture menu. Check if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution using the display settings on the external device. Check the video cable connections. Adjust the Phase setting in the menu option. Refer to the SCREEN (RGB-PC). Scroll to other channels. There may a problem with the broadcast. The station signal may be weak. Aim the antenna to the proper direction. Check if there is local interference such as an electrical appliance or power tool. E N G L I S H Movie Problem The file does not appear on the Movie List. Message is displayed saying This file is invalid or the audio is working normally but the video is not working normally. Message is displayed saying Unsupported Audio or the video is working normally but the audio is not working normally. Check whether the extension is supported. Resolution Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the resolution is supported. Check whether the video/audio codec is supported. Check whether the frame rate is supported. Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the audio codec is supported. Check whether the bit rate is supported. Check whether the sample rate is supported. Subtitle is not working. Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the video file and subtitle file name are the same. Check whether the video file and subtitle file are located in the same folder. Check whether the subtitle file is supported. Check whether the language is supported. (When you open the subtitle file in Memo Pad, you can check the language of the subtitle file.) 120 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 0 - 40C Less than 80%

-20 - 60C Less than 85%

MODELS 50PZ750

(50PZ750-UG) 60PZ750

(60PZ750-UG) Dimensions

(W x H x D) Weight With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 1185.2 mm x 782.6 mm x 317.2 mm

(46.6 inch x 30.8 inch x 12.4 inch) 1185.2 mm x 714.0 mm x 49.6 mm

(46.6 inch x 28.1 inch x 1.9 inch) 31.5 kg (69.4 lb) 27.9 kg (61.5 lb) 3.7 A / 370 W AC 100 - 240V ~ 50 / 60 Hz 1404.0 mm x 911.4 mm x 364.4 mm 55.2 inch x 35.8 inch x 14.3 inch) 1404.0 mm x 837.8 mm x 49.6 mm

(55.2 inch x 32.9 inch x 1.9 inch) 46.3 kg (102.0 lb) 40.3 kg (88.8 lb) 5.3 A / 530 W MODELS Dimensions

(W x H x D) Weight With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 50PZ950

(50PZ950-UA) 50PZ950U

(50PZ950U-UA) 1175.2 x 787.6 x 317.2 mm

(46.2 inch x 31.0 inch x 12.4 inch) 1175.2 x 720.6 x 49.6 mm

(46.2 inch x 28.3 inch x 1.9 inch) 32.5 kg (71.6 lb) 28.9 kg (63.7 lb) 3.7 A / 370 W AC 100 - 240V ~ 50 / 60 Hz 60PZ950

(60PZ950-UA) 60PZ950U

(60PZ950U-UA) 1393.4 mm x 916.4 mm x 364.4 mm

(54.8 inch x 36.0 inch x 14.3 inch) 1393.4 mm x 843.8 mm x 49.6 mm

(54.8 inch x 33.2 inch x 1.9 inch) 46.3 kg (102.0 lb) 40.3 kg (88.8 lb) 5.3 A / 530 W E N G L I S H MODELS With stand Dimensions

(W x H x D) Weight Without stand With stand Without stand Current Value / Power consumption Power requirement MODELS Dimensions

(W x H x D) With stand Weight Without stand With stand Without stand Current Value / Power consumption Power requirement MODELS With stand Dimensions

(W x H x D) Weight Without stand With stand Without stand Current Value / Power consumption Power requirement SPECIFICATIONS 121 42LV3700

(42LV3700-UD) 47LV3700

(47LV3700-UD) 55LV3700

(55LV3700-UD) 1108.0 mm x 746.0 mm x 256.0 mm

(43.6 inch x 29.3 inch x 10.0 inch) 1108.0 mm x 677.0 mm x 30.4 mm

(43.6 inch x 26.6 inch x 1.1 inch) 20.9 kg (46.0 lb) 18.7 kg (41.2 lb) 1.4 A / 140 W 998.0 mm x 684.0 mm x 256.0 mm

(39.2 inch x 26.9 inch x 10.0 inch) 998.0 mm x 615.0 mm x 30.4 mm

(39.2 inch x 24.2 inch x 1.1 inch) 15.5 kg (34.1 lb) 13.3 kg (29.3 lb) Philippines : 1.3 A / 130 W Other Country : 1.1 A /

110 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 1286.0 mm x 847.0 mm x 338.0 mm

(50.6 inch x 33.3 inch x 13.3 inch) 1286.0 mm x 778.0 mm x 30.4 mm

(50.6 inch x 30.6 inch x 1.1 inch) 25.5 kg (56.2 lb) 21.4 kg (47.1 lb) 1.6 A / 160 W 42LV5400

(42LV5400-UB) 42LV5500

(42LV5500-UA)

(42LV5500-UG) 47LV5400

(47LV5400-UB) 47LV5500

(47LV5500-UA) 55LV5400

(55LV5400-UB) 55LV5500

(55LV5500-UA) 1012.0 mm x 683.0 mm x 256.0 mm

(39.8 inch x 26.8 inch x 10.0 inch) 1012.0 mm x 617.0 mm x 29.9 mm

(39.8 inch x 24.2 inch x 1.1 inch) 15.5 kg (34.1 lb) 13.2 kg (29.1 lb) 1.4 A / 140 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 1121.0 mm x 746.0 mm x 256.0 mm

(44.1 inch x 29.3 inch x 10.0 inch) 1121.0 mm x 678.0 mm x 29.9 mm

(44.1 inch x 26.6 inch x 1.1 inch) 20.7 kg (45.6 lb) 18.4 kg (40.5 lb) 1.5 A / 150 W 1298.0 mm x 849.0 mm x 338.0 mm

(51.1 inch x 33.4 inch x 13.3 inch) 1298.0 mm x 778.0 mm x 29.9 mm

(51.1 inch x 30.6 inch x 1.1 inch) 25.8 kg (56.8 lb) 21.7 kg (47.8 lb) 1.7 A / 170 W 42LW5600

(42LW5600-UA) 47LW5600

(47LW5600-UA) 55LW5600

(55LW5600-UA) 1005.0 mm x 688.0 mm x 256.0 mm

(39.5 inch x 27.0 inch x 10.0 inch) 1005.0 mm x 621.0 mm x 29.9 mm

(39.5 inch x 24.4 inch x 1.1 inch) 15.2 kg (33.5 lb) 13.0 kg (28.6 lb) 1.4 A / 140 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 1115.0 mm x 750.0 mm x 256.0 mm

(43.8 inch x 29.5 inch x 10.0 inch) 1115.0 mm x 683.0 mm x 29.9 mm

(43.8 inch x 26.8 inch x 1.1 inch) 20.7 kg (45.6 lb) 18.5 kg (40.7 lb) 1.5 A / 150W 1293.0 mm x 851.0 mm x 338.0 mm

(50.9 inch x 33.5 inch x 13.3 inch) 1293.0 mm x 785.0 mm x 29.9 mm

(50.9 inch x 30.9 inch x 1.1 inch) 26.2 kg (57.7 lb) 22.0 kg (48.5 lb) 1.7 A / 170 W E N G L I S H 122 SPECIFICATIONS Dimensions

(W x H x D) Weight MODELS With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 32LW5700

(32LW5700-UE) 42LW5700

(42LW5700-UE) 766.0 mm x 545.0 mm x 240.0 mm

(30.1 inch x 21.4 inch x 9.4 inch) 766.0 mm x 491.0 mm x 41.0 mm

(30.1 inch x 19.3 inch x 1.6 inch) 10.7 kg (23.5 lb) 8.9 kg (19.6 lb) 1.2A / 120 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 999.0 mm x 681.0 mm x 255.0 mm

(39.3 inch x 26.8 inch x 10.0 inch) 999.0 mm x 623.0 mm x 30.9 mm

(39.3 inch x 24.5 inch x 1.2 inch) 15.7 kg (34.6 lb) 13.4 kg (29.5 lb) 1.4 A / 140 W MODELS 47LW5700

(47LW5700-UE) 55LW5700

(55LW5700-UE) Dimensions

(W x H x D) Weight With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 1109.0 mm x 744.0 mm x 255.0 mm

(43.6 inch x 29.2 inch x 10.0 inch) 1109.0 mm x 684.0 mm x 30.9 mm

(43.6 inch x 26.9 inch x 1.2 inch) 20.2 kg (44.5 lb) 17.9 kg (39.4 lb) 1.5 A / 150 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 1286.0 mm x 848.0 mm x 338.0 mm

(50.6 inch x 33.3 inch x 13.3 inch) 1286.0 mm x 784.0 mm x 30.9 mm

(50.6 inch x 30.8 inch x 1.2 inch) 26.2 kg (57.7 lb) 22.1 kg (48.7 lb) 1.7 A / 170 W E N G L I S H MODELS With stand Dimensions

(W x H x D) Weight Without stand With stand Without stand Current Value / Power consumption Power requirement 47LW6500

(47LW6500-UA) 55LW6500

(55LW6500-UA) 1119.0 mm x 749.0 mm x 255.0 mm

(44.0 inch x 29.4 inch x 10.0 inch) 1119.0 mm x 684.0 mm x 29.9 mm

(44.0 inch x 26.9 inch x 1.1 inch) 21.0 kg (46.2 lb) 18.2 kg (40.1 lb) 1.5 A / 150 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 1297.0 mm x 851.0 mm x 341.0 mm

(51.0 inch x 33.5 inch x 13.4 inch) 1297.0 mm x 785.0 mm x 29.9 mm

(51.0 inch x 30.9 inch x 1.1 inch) 27.0 kg (59.5 lb) 22.0 kg (48.5 lb) 1.7 A / 170W 65LW6500

(65LW6500-UA) 1555.0 mm x 1012.0 mm x 341.0 mm

(61.2 inch x 39.8 inch x 13.4 inch) 1555.0 mm x 940.0 mm x 38.1 mm

(61.2 inch x 37.0 inch x 1.5 inch) 49.0 kg (108.0 lb) 42.0 kg (92.5 lb) 2.4 A / 240 W MODELS 47LW9800

(47LW9800-UA) SPECIFICATIONS 123 55LW9800

(55LW9800-UA) 55LV9500

(55LV9500-UA) Dimensions

(W x H x D) Weight With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 1095.0 mm x 735.0 mm x 235.0 mm

(43.1 inch x 28.9 inch x 9.2 inch) 1095.0 mm x 665.0 mm x 27.5 mm

(43.1 inch x 26.1 inch x 1.0 inch) 22.5 kg (49.6 lb) 18.2 kg (40.1 lb) 2.1 A / 210 W USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz Other Country: AC 100 - 240 V ~ 50 / 60 Hz 1265.0 mm x 831.0 mm x 285.0 mm

(49.8 inch x 32.7 inch x 11.2 inch) 1265.0 mm x 760.0 mm x 27.5 mm

(49.8 inch x 29.9 inch x 1.0 inch) 29.0 kg (63.9 lb) 23.8 kg (52.4 lb) 2.5 A / 250 W MODELS With stand Dimensions

(W x H x D) Weight Without stand With stand Without stand Current Value / Power consumption Power requirement Dimensions

(W x H x D) Weight MODELS With stand Without stand With stand Without stand Current Value / Power consumption Power requirement 42LK530

(42LK530-UC) 47LK530

(47LK530-UC) 55LK530

(55LK530-UC) 1024.0 mm x 685.0 mm x 261.0 mm

(40.3 inch x 26.9 inch x 10.2 inch) 1024.0 mm x 621.0 mm x 76.8 mm

(40.3 inch x 24.4 inch x 3.0 inch) 15.5 kg (34.1 lb) 13.9 kg (30.6 lb) 2.0 A / 200 W AC 100 - 240V ~ 50 / 60 Hz 1137.0 mm x 758.0 mm x 270.0 mm

(44.7 inch x 29.8 inch x 10.6 inch) 1137.0 mm x 685.0 mm x 76.8 mm

(44.7 inch x 26.9 inch x 3.0 inch) 20.3 kg (44.7 lb) 18.3 kg (40.3 lb) 2.5 A / 250 W 1329.0 mm x 872.0 mm x 330.0 mm

(52.3 inch x 34.3 inch x 12.9 inch) 1329.0 mm x 796.0 mm x 96.5 mm

(52.3 inch x 31.3 inch x 3.7 inch) 33.0 kg (72.7 lb) 29.8 kg (65.6 lb) 3.2 A / 320 W 42LK550

(42LK550-UA)

(42LK550-UG) 1019.0 mm x 698.0 mm x 265.0 mm

(40.1 inch x 27.4 inch x 10.4 inch) 1019.0 mm x 631.0 mm x 76.5 mm

(40.1 inch x 24.8 inch x 3.0 inch) 16.2 kg (35.7 lb) 14.5 kg (31.9 lb) 1.9 A / 190 W AC 100 - 240V ~ 50 / 60 Hz 47LK550

(47LK550-UA) 1132.0 mm x 762.0 mm x 265.0 mm

(44.5 inch x 30.0 inch x 10.4 inch) 1132.0 mm x 695.0 mm x 76.5 mm

(44.5 inch x 27.3 inch x 3.0 inch) 19.0 kg (41.8 lb) 17.3 kg (38.1 lb) 2.5 A / 250 W E N G L I S H 124 SPECIFICATIONS RGB (PC), HDMI (PC), supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640x350 720x400 640x480 800x600 1024x768 1360x768 1280x1024

(HDMI-PC) 1920x1080

(RGB-PC) 1920x1080

(HDMI-PC) 31.468 31.469 31.469 37.879 48.363 47.712 63.981 66.587 67.50 70.09 70.08 59.94 60.31 60.00 60.015 60.02 59.934 60.00 HDMI (DTV) supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x480p 1280x720p 1920x1080i 1920x1080p E N G L I S H 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 Component supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.500 Component port connecting information Component ports on the TV Video output ports on DVD player Y Y Y Y Y 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 PB PB B-Y Cb Pb PR PR R-Y Cr Pr SPECIFICATIONS 125 DivX supported mode File Extensions Audio/Video Codec Profile/Level Support Explanation

.asf

.wmv

.divx

.avi

.mp4

.m4v

.mov

.mkv

.ts

.trp

.tp

.vob

.mpg Video Audio Video Audio Video VC-1 Advanced Profile VC-1 Simple and Main Profiles WMA Standard WMA 9 Professional DivX 3.11 DivX4 DivX5 DivX6 XViD H.264 / AVC MPEG-1 Layer I, II MPEG-1 Layer III (MP3) Dolby Digital H.264 / AVC MPEG-4 Part 2 Audio AAC Video H.264 / AVC Audio Video Audio Video Audio Video Audio HE-AAC Dolby Digital H.264 / AVC MPEG-2 VC-1 MPEG-1 Layer I, II MPEG-1 Layer III (MP3) Dolby Digital Dolby Digital Plus AAC MPEG-1 MPEG-2 Dolby Digital MPEG-1 Layer I, II DVD-LPCM MPEG-1 MPEG-1 Layer I, II Advanced Profile@Level 3

(e.g. 720p60, 1080i60, 1080p30) Simple Profile@Medium Level (e.g. CIF, QVGA) Main Profile@High Level (e.g. 1080p30) Only streams compliant to SMPTE 421M VC-1 standard are supported. Advanced Simple Profile

(e.g. 720p/1080i) Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) Global motion compensation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30 Advanced Simple Profile (e.g. 720p/

1080i) AAC-LC and HE-AAC Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) HE-AAC-LC and HE-AAC Global motion compensation or quarterpel motion estimation does not supported. Streams using this syntax are not supported. Most of the MKV content available is encoded by the open source x264 codec. E N G L I S H Main Profile@ Level 4.1 High Profile@ Level 4.1

(e.g. 720p60, 1080i60, 1080p30) Main Profile@High Level

(e.g. 720p60, 1080i60) Simple Profile@Medium Level

(e.g. CIF, QVGA) Main Profile@High Level

(e.g. 1080p30) Advanced Profile@Level3

(e.g. 720p60, 1080i60, 1080p30) AAC-LC and HE-AAC Main Profile@High Level

(e.g. 720p60, 1080i60) Only streams compliant to SMPTE 421M VC-1 standard are supported. Main Profile@High Level

(e.g. 720p60, 1080i60) Only streams compliant configured properly for TS, PS or ES 126 SPECIFICATIONS 3D supported formats Input Signal Resolution 720p 1280x720 Horizontal Frequency

(kHz) 45.00 90.00 1080i 1920x1080 33.75 HDMI 1080p 1920x1080 E N G L I S H Component

) 720p 1280x720 1080i 1920x1080 67.50 27.00 54.00 67.50 (

) 33.75 44.96 45.00 33.72 33.75 Vertical Frequency

(Hz) 60 60 60 60 24 24 30 30 59.94 60.00 59.94 60.00 RGB-PC 1080p 1920x1080 66.587 59.934 USB 1080p 1920x1080 33.75 DLNA 1080p 1920x1080 33.75 30 30 Playable 3D video format Side by Side Top & Bottom HDMI 3D Top & Bottom HDMI 3D Frame Packing Side by Side Top & Bottom HDMI 3D Side by Side (Half) Side by Side Top & Bottom Checker Board Single Frame Sequential Side by Side Top & Bottom Checker Board HDMI 3D Top & Bottom HDMI 3D Frame Packing HDMI 3D Frame Packing Side by Side Top & Bottom Checker Board Side by Side Top & Bottom Side by Side Top & Bottom Side by Side Top & Bottom Side by Side Top & Bottom Checker Board MPO (Photo) Side by Side Top & Bottom Checker Board DTV 720p, 1080i Side by Side Top & Bottom Signal Playable 3D video format Media contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom to play in 3D. Video, which is input as HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom format, is switched into the 3D screen automatically. SPECIFICATIONS 127 Wireless LAN for Broadband/DLNA Adaptor SPEC (For LV9500, LW9800 series) This device only works with compatible LG TV. Standard Frequency Range Modulation Output Power (Typical) Data rate Antenna Gain (Typical) Occupied bandwidth IEEE802.11a/b/g/n 2402 to 2483 MHz 5150 to 5250 MHz 5725 to 5850 MHz CCK / OFDM / MIMO 802.11a: 14 dBm 802.11b: 17 dBm 802.11g: 14 dBm 802.11n: 13 dBm 802.11a/g: 54 Mbps 802.11b: 11 Mbps 802.11n: 300 Mbps 2402 to 2483 MHz: 1.17 dBi 5150 to 5250 MHz: 4.67 dBi 5725 to 5850 MHz: 3.30 dBi 802.11a/b/g: HT20 802.11n: HT20/40 Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. FCC ID of Wi-Fi module inside TV FCC ID: BEJWN8522D1 E N G L I S H RF module (BM-LDS201) specification For TV By using a 2.4 GHz bandwidth radio frequency(RF). Output: 1 dBm or lower Maximum Communication Distance: 10 m (30 ft) in an open space Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz) Transfer Rate: 250 kbps FCC ID of RF module inside TV FCC ID: BEJLDS201 128 IR CODES IR CODES

(Depending on model) How to Connect Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Output waveform Single pulse, modulated with 37.917kHz signal at 455kHz Frame configuration E N G L I S H 1st frame Repeat frame Lead code Repeat code Bit description Frame interval: Tf The waveform is transmitted as long as a key is depressed. Code

(Hexa) Function Note Code

(Hexa) Function Note IR CODES 129 08 Power Remote control Button

(Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Q.Menu Home INPUT Number Key 0-9

- (Dash)/LIST FLASHBK MUTE/DELETE VOL +

VOL -

CH ^

CH v FAV/MARK

v

ENTER BACK RATIO FREEZE ENERGY SAVING Remote control Button Remote control Button SIMPLINK Remote control Button INFO AV MODE Remote control Button Remote control Button RED Remote control Button GREEN Remote control Button YELLOW BLUE Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button 45 43 0B 10 19 4C 1A 09 02 03 00 01 1E 40 41 07 06 44 28 79 BA (

) 95 7E AA 30 72 71 63 61 B1 B0 BA 8E 8F Use the feature depending on your model. 0F DC 5B D6 C4 C5 5A D0 BF D4 D5 CE CC E9 DA 76 77 AF TV 3D EXIT TV POWER ON POWER OFF AV1 AV2 COMPONENT1 COMPONENT2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 Ratio 4:3 Ratio 16:9 Ratio Cinema Zoom Remote control Button Remote control Button Remote control Button Discrete IR Code

(TV Input Selection) Discrete IR Code

(Only Power Off) Discrete IR Code

(Only Power Off) Discrete IR Code

(AV1 Input Selection) Discrete IR Code

(AV2 Input Selection) Discrete IR Code

(Component1 Input Selection) Discrete IR Code

(Component2 Input Selection) Discrete IR Code

(RGB-PC Input Selection) Discrete IR Code

(HDMI1 Input Selection) Discrete IR Code

(HDMI2 Input Selection) Discrete IR Code

(HDMI3 Input Selection) Discrete IR Code

(HDMI4 Input Selection) Discrete IR Code

(Only 4:3 Mode) Discrete IR Code

(Only 16:9 Mode) Discrete IR Code

(Only Cinema Zoom Mode) E N G L I S H 130 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the products functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE RS-232C on this TV is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C connection cables are not supplied with the product. E N G L I S H Type of connector: D-Sub 9-

Pin Male RS-232C IN

(CONTROL & SERVICE) Pin name No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection No. EXTERNAL CONTROL DEVICE SETUP 131 RS-232C configurations 7-Wire Configuration

(Serial female-female NULL modem cable) Set ID Set ID number. 3-Wire Configuration (Not standard) 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press ENTER. 3 Press the Navigation buttons to scroll to OPTION and press ENTER. 4 Press the Navigation buttons to scroll to Set ID and press ENTER. 5 Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99. 6 When you are finished, press EXIT. E N G L I S H

*Real data mapping 0: Step 0 A: Step 10 (SET ID 10) F: Step 15 (SET ID 15) 10: Step 16 (SET ID 16) 63: Step 99 (SET ID 99) 64: Step 100 132 EXTERNAL CONTROL DEVICE SETUP Communication Parameters Baud rate: 9600 bps (UART) Data length: 8 bits Parity : None Stop bit: 1 bit Communication code: ASCII code Use a crossed (reverse) cable Command reference list COMMAND1 COMMAND2 DATA COMMAND1 COMMAND2 DATA 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k k E N G L I S H a b c d e f g h i j k l m

(Hexadeci-

mal) 00 01

(See p.133.)

(See p.133.) 00 - 01 00 - 01 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 01 00 - 01 14. Treble 15. Bass 16. Balance 17. 3D (For 3D TV) 18. Color Temperature 19. Extended 3D

(For 3D TV) 20. ISM Method (

) 21. Energy Saving 22. Auto Configuration k k k x x x j j j 24. Channel Add/Del m 25. Key 26. Backlight (

m

) m r s t t u v p q u b c g

(Hexadeci-

mal) 00 - 64 00 - 64 00 - 64

(See p.133.) 00 - 64

(See p.133.)

(See p.133.)

(See p.133.)

(See p.133.) 00 01

(See p.133.) 00 - 64 COM-

MAND1 COM-

MAND2 23. Channel Tuning m a DATA00

(Hexadeci-

mal) physical program high DATA01

(Hexadeci-

mal) major program low DATA02

(Hexadeci-

mal) major low DATA03

(Hexadeci-

mal) minor high DATA04

(Hexadeci-

mal) minor low DATA05

(Hexadeci-

mal) attribute EXTERNAL CONTROL DEVICE SETUP 133 Transmission / Receiving protocol Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the set.(j, k, m or x)

[Command 2] : Second command to control the set.

[Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~

99. When selecting Set ID 0, every connected the set is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.

[DATA] : To transmit the command data. Transmit the FF data to read status of command.

[Cr] : Carriage Return ASCII code 0x0D

[ ] : ASCII code space (0x20)

*In this model, set will not send the status during the standby mode. OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

*In this model, set will not send the status during the standby mode.

*Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[OK] : Use the large character. E N G L I S H Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time

*In this model, set will not send the status during the standby mode.

*Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.

[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.

[NG] : Use the large character E N G L I S H 134 EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit Data 01: Power On FF data based on this format, Acknowledgement data feedback presents status about each function.

* Note: In this model, set will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. Data 11: Analog (Cable) 02. Input Select (Command: x b) To select input source for set. Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog

(Antenna) Data 20: AV or AV1 Data 40: Component1 Data 41: Component2 Data 42: Component3 Data 60: RGB-PC Data 91: HDMI2 Data 90: HDMI1 Data 92: HDMI3 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

* Use the feature depending on your model. Data 21: AV2 03. Aspect Ratio (Command: k c) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3 Data 02: 16:9 Data 06: Set by program Data 09: Just scan Data 10: Cinema Zoom 1 Data 1F: Cinema Zoom16 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on), Video-

out Mute off Data 01: Screen mute on (Picture off) Data 10: Video-out Mute on Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD). 05. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

06. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

07. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

08. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

09. Color (Command: k i) To adjust screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

10. Tint (Command: k j) To adjust screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

11. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00: OSD off Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

Data 01: OSD on 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If youre not using the remote control and front panel controls on the Monitor set, use this mode. When main power is on/off, remote control lock is released. If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV. 14. Treble (Command: k r) To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

15. Bass (Command: k s) To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

16. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

17. 3D (Command: x t) (For 3D TV) To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data01] [ ][Data02][ ]

[Data03][ ][Data04][Cr]

Data1 00: 3D On 02: 3D to 2D 01: 3D Off 03: 2D to 3D Data2 00: Top and Bottom 01: Side by Side 02: Check Board 03: Frame Sequential Data3 00: Right to Left 01: Left to Right Data4 3D Depth: Min : 00 ~ Max : 14

(*transmit by Hexadecimal code)

* If data1 is 00 (3D On), data4 has no meaning.

* If data1 is 01 (3D off) or 02 (3D to 2D), data2, data3 and data4 have no meaning.

* If data1 is 03 (2D to 3D), data2 and data3 have no meaning. Data 3 x x x Data 2 Data 1 00 x 01 x 02 03 x x : Dont care Acknowledgement [t][ ][OK][Data01][Data02]

[Data03][Data04][x][t][ ][NG][Data01][x]

Data 4 x x x EXTERNAL CONTROL DEVICE SETUP 135 18. Color Temperature (Command: x u) To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

19. Extended 3D (Command: x v) (For 3D TV) To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr]

Data1: 3D option 00: 3D Picture Correction 01: 3D Depth (2D to 3D Only) 02: 3D Viewpoint 03: 3D Picture Size 04: 3D Picture Balance 05: 3D Optimization E N G L I S H Data2: It has own range for each 3D option determined by Data1. 1)When Data1 is 00 00: Right to Left 01: Left to Right 2)When Data1 is 01 Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code) 3)When Data1 is 02 Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code) 4)When Data1 is 03 00: Just Scan 01: 16:9 5)When Data1 is 04 00: Off 01: On 6)When Data1 is 05 Data Min: 00 ~ Max: 02 (*transmit by Hexadecimal code) Acknowledgement [v][ ][OK][Data01][Data02][x] [v][ ]

[NG][Data01][x]

* Use the feature depending on your model. 20. ISM Method (Command: j p)(

) To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data 02: Orbiter 04: White Wash 08: Normal 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

21. Energy Saving (Command: j q) To control the energy saving function. Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: off 01: Minimum 02: Medium 03: Maximum 04: Auto (Depending on model) 05: Screen off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

22. Auto Configuration (Command: j u) Total = ma 00 00 00 1E 00 03 22 24. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG]

[Data][x]

25. Key (Command: m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]

See p.128. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

When TV is in the standby mode, TV will turn on by POWER button of remote control only.

) 26. Backlight (Command: m g) (

To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)

*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

136 EXTERNAL CONTROL DEVICE SETUP To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

23. Channel Tuning (Command: m a) To tune channel to following physical/major/

minor number.

(This feature is not available for all models.) Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01] [ ]

[Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data 01 & 02: Major Channel Number Data 02: Low byte Data 01: High byte Two bytes are available for the Major and Minor, normally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. The table lists the binary code which must be converted to Hexadecimal before sending. For example:

The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.

* 7th bit : For which source do you want to change the channel.

* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.

* 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type.

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 E N G L I S H EXTERNAL CONTROL DEVICE SETUP 137 E N G L I S H 138 EXTERNAL CONTROL DEVICE SETUP

* Table List (Channel Tuning) 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 0 Main 1 Sub 0 Two 1 One 0 Use 1 No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 Step 0 NTSC Air 1 NTSC Cable 0 ATSC Air 1 ATSC Cable_std 0 ATSC Cable_hrc 1 ATSC Cable_irc 0 ATSC Cable_auto 1 Reserved x 1 Reserved

... E N G L I S H OPEN SOURCE LICENSE Please be informed that LG Electronics products may contain open source software listed in the tables below. License Apache license MIT license Component bonjour cares curl fontconfig libcurl libxml2 libxslt lua interpreter expat license expat Freetype license freetype JPEG license libjpeg OpenSSL license Zlib/libpng license portmap license pixman license openssl libmng libpng zlib portmap pixman X.net license libicu BSD license RSA Data security license netBSD Simple XML Parser xySSL MD5 JSON license MS92 license JSON snacc OPEN SOURCE LICENSE 139 LG Electronics products may also contain open source software listed as Components in the table below, and you may download the complete source code thereof free of charge, from LG Electronics website (http://opensource.lge. com) for a period of three (3) years from our last shipment of this product. Please be informed that the open source software is subject to the terms and conditions of the applicable open source licenses, which are provided to you herein below. License Component GNU GPL v2.0 Linux kernel 2.6 alsa busybox e2fsprogs gdbserver jfsutils Izo msdl 1.1 mtd-utils ntpclient procps GNU LGPL v2.1 MPL 1.1 atk directFB ffmpeg glib gnuTLS gail GTK+

iconv libintl libgcrypt libgpg-error libgphoto2 libsoup pango pyenchant qt uClibc webkit cairo nanox mozilla firefox zzipib E N G L I S H E N G L I S H 140 OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE source code. And you must show them these terms so they know their rights. Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-

1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free softwareto make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundations software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/

or modify the software. Also, for each authors protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyones free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/

or translated into another language. (Hereinafter, translation is included without limitation in the term modification.) Each licensee is addressed as you. Activities other than copying, distribution and modification are not covered by this License;

they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program

(independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;

and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. bYou must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and OPEN SOURCE LICENSE 141 separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

a Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, bAccompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code E N G L I S H 142 OPEN SOURCE LICENSE means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. E N G L I S H OPEN SOURCE LICENSE 143 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/

OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM

(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 10.If you wish to incorporate parts of the Program END OF TERMS AND CONDITIONS into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN E N G L I S H 144 OPEN SOURCE LICENSE GNU Lesser General Public License Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free softwareto make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packagestypically librariesof the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software

(and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original authors reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. E N G L I S H We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a work based on the library and a work that uses the library. The former contains code derived from the library, whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public OPEN SOURCE LICENSE 145 License (also called this License). Each licensee is addressed as you. A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs

(which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/ or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License;

they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library

(independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work E N G L I S H 146 OPEN SOURCE LICENSE based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. E N G L I S H However, linking a work that uses the Library with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a work that uses the library. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a work that uses the Library uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.

(Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customers own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:

OPEN SOURCE LICENSE 147 a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above);

and, if the work is an executable linked with the Library, with the complete machine-

readable work that uses the Library, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interfacecompatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed

(in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary E N G L I S H 148 OPEN SOURCE LICENSE libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under E N G L I S H this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS OPEN SOURCE LICENSE 149 TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/

OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found.

<one line to give the librarys name and an idea of what it does.> Copyright (C) <year>

<name of author>

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public E N G L I S H 150 OPEN SOURCE LICENSE License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:

E N G L I S H Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice Mozilla Public License 1.1 (MPL 1.1) 1. Definitions. 1.0.1. Commercial Use means distribution or otherwise making the Covered Code available to a third party. 1.1. Contributor means each entity that creates or contributes to the creation of Modifications. 1.2. Contributor Version means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3. Covered Code means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof. 1.4. Electronic Distribution Mechanism means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.5. Executable means Covered Code in any form other than Source Code. 1.6. Initial Developer means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A. Thats all there is to it!

1.7. Larger Work means a work which combines Covered Code or portions thereof with code not governed by the terms of this License. 1.8. License means this document. 1.8.1. Licensable means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.9. Modifications means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is:

(a) Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.

(b) Any new file that contains any part of the Original Code or previous Modifications. 1.10. Original Code means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License. 1.10.1. Patent Claims means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor. 1.11. Source Code means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributors choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge. 1.12. You (or Your) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1. For legal entities, You includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, control means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more OPEN SOURCE LICENSE 151 than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity. 2. Source Code License. 2.1. The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:

(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications, and/or as part of a Larger Work; and

(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).

(c) the licenses granted in this Section 2.1(a) and

(b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.

(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the combination of the Original Code with other software or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license

(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor

(or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and

(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in E N G L I S H E N G L I S H 152 OPEN SOURCE LICENSE combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version

(or portions of such combination).

(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of the Covered Code.

(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software

(except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor. to whom you made an Executable version available; and if made available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party. 3.3. Description of Modifications. You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code. 3. Distribution Obligations. 3.1. Application of License. 3.4. Intellectual Property Matters

(a) Third Party Claims. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5. 3.2. Availability of Source Code. Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone If Contributor has knowledge that a license under a third partys intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled LEGAL which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps

(such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained.

(b) Contributor APIs. If Contributors Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.

(c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributors Modifications are Contributors original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License. 3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer. 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which OPEN SOURCE LICENSE 153 You describe recipients rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipients rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer. 3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code. E N G L I S H 4. Inability to Comply Due to Statute or Regulation. If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. Versions of the License. 154 OPEN SOURCE LICENSE 6.1. New Versions. Netscape Communications Corporation

(Netscape) may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number. 6.2. Effect of New Versions. Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License. 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases Mozilla, MOZILLAPL, MOZPL, Netscape, MPL, NPL or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License.

(Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.) 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU

(NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive. 8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as Participant) alleging that:

(a) such Participants Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.

(b) any software, hardware, or device, other than such Participants Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant E N G L I S H under Sections 2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant. 8.3. If You assert a patent infringement claim against Participant alleging that such Participants Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT

(INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTYS NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10.U.S. GOVERNMENT END USERS. OPEN SOURCE LICENSE 155 The Covered Code is a commercial item, as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of commercial computer software and commercial computer software documentation, as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11.MISCELLANEOUS. This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-oflaw provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12.RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13.MULTIPLE-LICENSED CODE. E N G L I S H of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]

156 OPEN SOURCE LICENSE Initial Developer may designate portions of the Covered Code as Multiple-Licensed. Multiple-

Licensed means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A. EXHIBIT A -Mozilla Public License. The contents of this file are subject to the Mozilla Public License Version 1.1 (the License); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/

Software distributed under the License is distributed on an AS ISbasis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. The Original Code is _______________________. The Initial Developer of the Original Code is ________________________. Portions created by ______________________ are Copyright (C) _______________________. All Rights Reserved. Contributor(s): ________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the [___]

License), in which case the provisions of [______]

License are applicable instead of those above.If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] License.

[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text E N G L I S H Apache License Version 2.0 Apache License Version 2.0, January 2004 http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. License shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. Licensor shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. Legal Entity shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, control means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. You (or Your) shall mean an individual or Legal Entity exercising permissions granted by this License. Source form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. Object form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. Work shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). Derivative Works shall mean any work, whether in Source or Object form, that is based OPEN SOURCE LICENSE 157 on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link

(or bind by name) to the interfaces of, the Work and Derivative Works thereof. Contribution shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, submitted means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as Not a Contribution. Contributor shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royaltyfree, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those E N G L I S H 158 OPEN SOURCE LICENSE patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a)You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b)You must cause any modified files to carry prominent notices stating that You changed the files; and

(c)You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

(d)If the Work includes a NOTICE text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works;

within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an AS IS BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NONINFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for E N G L I S H damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work

(including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS OPEN SOURCE LICENSE 159 MIT license

- cares Copyright 1998 by the Massachusetts Institute of Technology. Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided as is without express or implied warranty.

- curl Copyright (C) 1998 - 2005, Daniel Stenberg,

<daniel@haxx.se>, et al. This software is licensed as described in the file COPYING, which you should have received as part of this distribution. The terms are also available at http://curl.haxx.se/docs/copyright. html. You may opt to use, copy, modify, merge, publish, distribute and/or sell copies of the Software, and permit persons to whom the Software is furnished to do so, under the terms of the COPYING file. This software is distributed on an AS IS basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.

- fontconfig Copyright (c) 2000 Keith Packard Copyright (c) 2005 Patrick Lam Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Keith Packard not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Keith Packard E N G L I S H E N G L I S H 160 OPEN SOURCE LICENSE makes no representations about the suitability of this software for any purpose. It is provided as is without express or implied warranty. KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

- libcurl Copyright (c) 1996 - 2010, Daniel Stenberg,

<daniel@haxx.se>. All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

- libxml2 Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him

- libxslt Copyright (C) 2001-2002 Daniel Veillard. Copyright (C) 2001-2002 Thomas Broyer, Charlie Bozeman and Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. OPEN SOURCE LICENSE 161 Expat license The source package was downloaded from <URL:

http://expat.sourceforge.net>. The original packager is Adam Di Carlo

<aph@debian.org>. The current maintainer is Ardo van Rangelrooij

<ardo@debian.org>. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. E N G L I S H THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him.

- lua interpreter Copyright 19942010 Lua.org, PUC-Rio. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. E N G L I S H 162 OPEN SOURCE LICENSE The FreeType Project LICENSE Legal Terms Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least. This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are that:

- We dont promise that this software works. However, we will be interested in any kind of bug reports. (as is distribution)

- You can use this software for whatever you want, in parts or full form, without having to pay us. (royalty-free usage)

- You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (credits) We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project. Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text:

Portions of this software are copyright

<year> The FreeType Project (www.freetype. org). All rights reserved. Please replace <year> with the value from the FreeType version you actually use. 0. Definitions Throughout this license, the terms package, FreeType Project and FreeType archive refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the FreeType Project, be they named as alpha, beta or final release. You refers to the licensee, or person using the project, where using is a generic term including compiling the projects source code as well as linking it to form a program or executable. This program is referred to as a program using the FreeType engine. This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. The FreeType Project is copyright (C) 1996-

2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty THE FREETYPE PROJECT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT. 2. Redistribution This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the OPEN SOURCE LICENSE 163 havent found anything to help you in the documentation. freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www. freetype.org JPEG license This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions:

(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.

(2) If only executable code is distributed, then the accompanying documentation must state that this software is based in part on the work of the Independent JPEG Group.

(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. E N G L I S H rights granted herein, subject to the following conditions:

- Redistribution of source code must retain this license file (FTL.TXT) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.

- Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isnt mandatory. These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials:

FreeType Project, FreeType Engine, FreeType library, or FreeType Distribution. As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license. 4. Contacts There are two mailing lists related to FreeType:

freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you 164 OPEN SOURCE LICENSE OpenSSL License Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www. openssl.org/) 4. The names OpenSSL Toolkit and OpenSSL Project must not be udsed to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-

core@openssl.org. 5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment:

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF E N G L I S H USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young

(eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-

commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

OPEN SOURCE LICENSE 165 zlib/libpng License This product may contain open source software licensed under zlib/libpng License. Libmng : Copyright 2000-2008 Gerard Juyn

(gerard@libmng.com) Libpng : Copyright (c) 1998-2008 Glenn Randers-

Pehrson

(Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

(Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) Zlib : Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler This software is provided as-is, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler E N G L I S H 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) The word cryptographic can be left out if the rouines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory

(application code) you must include an acknowledgement:

This product includes software written by Tim Hudson (tjh@cryptsoft.com) THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

166 OPEN SOURCE LICENSE Portmap license Pixman license Most of the files, fall under the following copyright, and are distributable under the terms of the BSD license. Copyright (c) 1983,1991 The Regents of the University of California. All rights reserved. Some of the RPC code, is copyrighted by Sun Microsystems, and is provided under the following terms:

Sun RPC is a product of Sun Microsystems, Inc. and is provided for unrestricted use provided that this legend is included on all tape media and as a part of the software program in whole or part. Users may copy or modify Sun RPC without charge, but are not authorized to license or distribute it to anyone else except as part of a product or program developed by the user or with the express written consent of Sun Microsystems, Inc. SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. Sun RPC is provided with no support and without any obligation on the part of Sun Microsystems, Inc. to assist in its use, correction, modification or enhancement. SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC OR ANY PART THEREOF. In no event will Sun Microsystems, Inc. be liable for any lost revenue or profits or other special, indirect and consequential damages, even if Sun has been advised of the possibility of such damages. Sun Microsystems, Inc. 2550 Garcia Avenue Copyright 1987, 1988, 1989, 1998 The Open Group Copyright 1987, 1988, 1989 Digital Equipment Corporation Copyright 1999, 2004, 2008 Keith Packard Copyright 2000 SuSE, Inc. Copyright 2000 Keith Packard, member of The XFree86 Project, Inc. Copyright 2004, 2005, 2007, 2008 Red Hat, Inc. Copyright 2004 Nicholas Miell Copyright 2005 Lars Knoll & Zack Rusin, Trolltech Copyright 2005 Trolltech AS Copyright 2007 Luca Barbato Copyright 2008 Aaron Plattner, NVIDIA Corporation Copyright 2008 Rodrigo Kumpera Copyright 2008 Andr Tupinamb Copyright 2008 Mozilla Corporation Copyright 2008 Frederic Plourde Copyright 2009 Sun Microsystems, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice (including the next paragraph) shall be E N G L I S H OPEN SOURCE LICENSE 167 included in all copies or substantial portions of the Software. X.net license THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Copyright (c) 1995-2001 International Business Machines Corporation and others All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. E N G L I S H 168 OPEN SOURCE LICENSE BSD license

- netBSD Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. This code is derived from software contributed to The NetBSD Foundation by Lennart Augustsson

(lennart@augustsson.net) at Carlstedt Research &

Technology. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the NetBSD Foundation, Inc. and its contributors. 4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

- Simple XML Parser Copyright (c) 2001-2002 Bruno Essmann

<essmann@users.sourceforge.net>

All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, E N G L I S H OPEN SOURCE LICENSE 169 WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

- xyssl Copyright (C) 2006-2008 Christophe Devine Copyright (C) 2009 Paul Bakker

<polarssl_maintainer at polarssl dot org>

All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN E N G L I S H 170 OPEN SOURCE LICENSE RSA Data Security license JSON license Copyright (C) 1991-2, RSA Data Security, Inc. Copyright (c) 2005 JSON.org Created 1991. All rights reserved. License to copy and use this software is granted provided that it is identified as the RSA Data Security, Inc. MD5 Message-Digest Algorithm in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm in all material mentioning or referencing the derived work. RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided as is without express or implied warranty of any kind. These notices must be retained in any copies of any part of this documentation and/or software. E N G L I S H Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. The Software shall be used for Good, not Evil. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. MS92 license Copyright (C) 1992 Michael Sample and the University of British Columbia This library is free software; you can redistribute it and/or modify it provided that this copyright/license information is retained in original form. If you modify this file, you must clearly indicate your changes. This source code is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;

without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. OPEN SOURCE LICENSE 171 E N G L I S H The model and serial numbers of the TV is located on the back of the TV Record it below should you ever need service. MODEL SERIAL Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive

(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :

EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950-1

; Radio Frequency Interference

; Electromagnetic Immunity

; Power Line Harmonics

; Voltage Fluctuations

; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO'99 (TCO'99 applied model only) Congratulations!

You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 01 Regulatory Information cont. Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?

The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen

(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues:

ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:

TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%

by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-

eating birds and mammals, due to the bio-accumulative*

processes when not disposed of in accordance with strict standards for disposal. TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**

Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one 02 Regulatory Information cont. exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**

Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________

* Bio-accumulative is defined as substances which accumulate in living organisms.

**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO03 (TCO03 applied model only) Congratulations!

The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:

Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields 03 Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/about/environment/html/Recycling.jsp Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-

Hndler oder einen Unternehmensvertreter von LG. 04 Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp Franais Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :

http://www.lge.com/about/environment/html/Recycling.jsp Regulatory Information cont. Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/about/environment/html/Recycling.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que 05 respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/about/environment/html/Recycling.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar Regulatory Information cont. especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-

vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian 1994 LGE

' LG ',

. 06 Regulatory Information cont. K LGE

. LG.

http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne 2002/96/EC. 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-

ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques ventuels pour l'environnement et la sant humaine. 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce produit. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di 08 un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 2.Kaikki elektroniset laitteet ovat ongelmajtett, 1. joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten

, E O 2002/96/EOK. 2.H

. 3.H

. 4.

. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 09 Regulatory Information cont. Portuguese Hungarian Polish 10 Slovak Czech Croatian Regulatory Information cont. Estonian Latvian Lithuanian 11