| submitted | available | document details (if available) | source link |
|---|---|---|---|
| November 03 2010 | Microsoft Word - G_User_s manual.doc Tester Acrobat Distiller 7.0.5 (Windows) |
| various | Users Manual | Users Manual | 4.91 MiB | / November 03 2010 |
Order Number Test Report Number
: GETEC-C1-10-025
: GETEC-E3-10-006 FCC Part 15 subpart B Page 1 / 1 APPENDIX G
: USERS MANUAL EUT Type: Wireless Media Box FCC ID.: BEJANWL100W OWNERS MANUAL WIRELESS MEDIA BOX Please read this manual carefully before operating your set and retain it for future reference. www.lge.com WATChiNg TV / PrOgrAm CONTrOl Turning on the Wireless Media box ..................17 Input list .............................................................18 IR Blaster Setup ................................................18 APPENdix IR Code List ......................................................19 RF Specifications ..............................................20 Frequency Table ................................................21 Product Specifications .......................................22 Troubleshooting .................................................22 CONTENTS PrEPArATiON Accessories .........................................................3 Front panel controls ............................................4 BACK PANEL INFORMATION ............................5 Side panel INFORMATION .................................5 Wireless Ready Dongle ......................................6 Connecting to the TV. .........................................6 Attaching the Wireless Ready Dongle ................7 Back Cover for Wire Arrangement ......................8 Connection of 12 V AC/DC Adapter ....................8 Optimal Installation Location of Wireless Media Box ......................................................................9 Attaching the IR blaster .....................................10 Optimal location of external device with IR Blaster installed .................................................10 ExTErNAl EqUiPmENT SETUP Connecting with a Component cable ................11 Connecting with an HDMI cable .......................12 Connecting with an HDMI to DVI cable ............13 Connecting with RCA cable ..............................14 Digital Audio Out Setup .....................................15 Connecting with RGB ........................................15 Supported Display Resolution ...........................16 Except for USA Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D s of Dolby Laboratories. C O N T E N T S 2 PrEPArATiON ACCESSOriES Ensure that the following accessories are included with your Wireless Media Box. If an accessory is missing, please contact the dealer where you purchased the set. Image shown may differ slightly from your device. Owners Manual Power Cord Polishing Cloth
* Lightly wipe any stains or fingerprints on the surface of the Wireless Media Box with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration. 12V AC/DC Adapter Wireless Ready Dongle Velcro X 2EA Cable Holder Cable Management Clip X 2EA HDMI Cable 20 Pin Cable
(Power/Control) IR Blaster Cable P R E P A R A T O N I 3 PrEPArATiON FrONT PANEl CONTrOlS NOTE This product is only for home use. Do not use this product in medical institutions or near medical devices. It may cause some med-
Wireless device used to this instrument could be set up and used only to this instrument. When using the external device connected to the Wireless Media Box, some functions of the TV ical devices to malfunction. menu many not work. Image shown may differ slightly from your device. 1 2 3 4 AV1 AV2 COM1 COM2 RGB HDMI1 HDMI2 HDMI3 HDMI4 WIRELESS 1 2 3 4 input Source indicator & iNPUT touch button Select the input source by touching. Wireless Connection indicator It will flash when trying to connect to a wireless network and be turned on when connected. POWEr touch button Turn the Wireless Media Box on or off by touching. If the (Power) button of the Wireless Media Box is not turned on, the Wireless Media Box will not be turned on even when turn on the power of the TV. If the Wireless Media Box is not turned on even after turning the power of the TV on, check the (Power) button of the Wireless Media Box. COMPONENT / AV IN 1 COMPONENT / AV IN 2 R B L A S T E R RGB IN (PC) OPTICAL DIGITAL AUDIO IN SERVICE ONLY AUDIO OUT DC IN 12V L(MONO) AUDIO L(MONO) AUDIO SERVICE ONLY RGB/DVI A B
/ DVI IN A B VIDEO VIDEO L R L R 1 2 3 R R I Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the Wireless Media Box is switched on.
* ID Label of Wireless Media Box is located at the bottom of Wireless Media Box. P R E P A R A T O N I 4 BACK PANEl iNFOrmATiON Image shown may differ slightly from your device. 1 A AV1 VIDEO AV2 L R COM1 COM2 RGB L(MONO) AUDIO B HDMI1 HDMI2 HDMI3 HDMI4 R VIDEO L R WIRELESS L(MONO) AUDIO R A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY 3 2
/ DVI IN 1 RGB IN (PC) RGB/DVI SERVICE ONLY 3 4 5 6 7 8 5 2 I R B L A S T E R 5 SErViCE ONlY POrT hdmi/dVi iN input 6 Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). I R B L A S T E R rgB iN (PC) input 7 Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUdiO iN (rgB/dVi) input 8 Connect the audio from an external device. Component input 1 Connect a component video/audio device to these jacks. Audio/Video input(AV1/2) Connect audio/video output from an external device to these jacks. A B A B L R L R L(MONO) AUDIO R VIDEO L(MONO) AUDIO R VIDEO COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN 2 DC IN 12V OPTICAL DIGITAL ir Blaster Controls external equipment. SERVICE ONLY AUDIO OUT
/ DVI IN 2 3 1 RGB IN (PC) RGB/DVI SERVICE ONLY DC IN 12 V Power Cord Socket 3 This Wireless Media Box operates on 12 V DC power. Only use a power converter that the device was designed to use. 4 Optical digital Audio Out Optical digital audio output for use with amps. Note: In standby mode, this port doesnt work. SidE PANEl iNFOrmATiON Image shown may differ slightly from your device. IN 4 HDMI IN 4 Digital Connection. Supports HD video and Digital audio. Doesnt support 480i and 576i. IN 4 P R E P A R A T O N I 5 PrEPArATiON WirElESS rEAdY dONglE Image shown may differ slightly from your device. 1 2 WIRELESS CONTROL OUT Wireless Control Port 1 This port is used to send and receive commands between the TV and the Wireless Media Box. HDMI Out Port 2 This port sends the audio and video received from the Wireless Media Box to the TV. CONNECTiNg TO ThE TV. Image shown may differ slightly from your device. 1 2 WIRELESS CONTROL OUT IN WIRELESS CONTROL 1 2 Use the provided 20 pin cable (power/control) to connect to the wireless control port of the Wireless Ready Dongle and the wireless control port on the TV. Now connect the HDMI to both the TV and the Wireless Ready Dongle. NOTE Install the Wireless Ready Dongle with the power of the TV turned off. Use the wireless control jack and 20 pin cable only for connecting the Wireless Ready TV and Wireless Ready Dongle. When used for other purposes, it can cause an error or damage to the product. P R E P A R A T O N I 6 ATTAChiNg ThE WirElESS rEAdY dONglE The Wireless Ready Dongle can be attached to the back of the TV with the included materials. 1 Remove the protective paper from the included Velcro pad and attach it to the TV as shown. It does not have to be in same position, but should be close to the TV's inputs. The TV will have a recommended location engraved on the TV. Velcro 2 Now place the Wireless Ready Dongle onto the Velcro pad. or or NOTE The attaching location on the Wireless Ready Dongle can differ by model. Check the engraving on the back cover and attach the cable according to the engraving. Clean the part where the magic tape (Velcro) is attached using the supplied brush and attach the part by pressing the area evenly for 1 minute. After about 10 minutes attach the wireless dongle firmly. Engraving or P R E P A R A T O N I 7 CONNECTiON OF 12 V AC/
dC AdAPTEr Image shown may differ slightly from your device. A 1 L R VIDEO L(MONO) AUDIO R B 3 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R VIDEO L(MONO) AUDIO R A B RGB IN (PC) 2
/ DVI IN 1 3 2 12V AC/DC Adapter 1 2 Connect the 12 V AC/DC adapter plug to the DC IN 12V input jack on the Wireless Media Box. Connect the power cord to the 12 V AC/DC adapter first, then plug the power cord into the wall power outlet. 3 Use only power supplies listed in the user instuction. CAUTiON Please be sure to connect the TV to the AC/
DC power adapter before connecting the TV's power plug to a wall power outlet. PrEPArATiON BACK COVEr FOr WirE ArrANgEmENT Image shown may differ slightly from your device. 1 Connect the cables as necessary.
(Refer to the p.6 to 7.) 2 After connecting the cables, bundle the cables and install the Cable holder as shown. Cable holder 3 Now install the Cable Management Clip which will attach to the back of the TV. NOTE: The Cable Management Clip attach-
ment location on the TV can differ by model. Cable management Clip NOTE Do not use the Cable management Clip to lift the TV. If the TV is dropped, you may be injured or the TV may be damaged. P R E P A R A T O N I 8 OPTimAl iNSTAllATiON lOCATiON OF WirElESS mEdiA BOx 0.3 m to 15 m
(1 feet to 49 feet) minimum 5 m
(16 feet) Wireless media Box Wireless units of 5 GHz band Keep the media box near the wireless ready don-
gle (TV) within 15 m (49 feet).
* Maximum receiving distance may differ depend-
ing on the building structure. Do not locate the media box and wireless ready dongle between walls. If there is a large metallic object between the media box and wireless ready dongle, the trans-
mission performance may be decreased. Avoid to putting the media box on the top of the hot objects (such as heater, set-top box or blueray player). Make sure that the distance between the media box and wireless ready dongle is more than 0.3 m
(1 feet). If there are more than four devices using the 5 GHz band in your house, you may experience poor picture quality or a long connection time.
* There are three kinds of 5 GHz products.
- 5.8 GHz codeless phone
- Dual band(2.4 GHz / 5 GHz) wireless LAN
- Wireless AV transmitter using Amimon chipset. In this case, proceed as follows. Move the 5 GHz products away at least 5 m (16 feet) from the wireless ready dongle. Please set your wireless LAN to 2.4 GHz band-
width (channel 1~11).
- Please refer the manual of your router for detail information.
- If it is not possible to change the channel, please move the router away from the wireless ready dongle. P R E P A R A T O N I 9 PrEPArATiON A VIDEO L R L(MONO) AUDIO R B 3 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R VIDEO L(MONO) AUDIO R 2
/ DVI IN 1 A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN RS-232C IN I R B L A S T E R RGB IN(PC) RGB/DVI SERVICE ONLY ATTAChiNg ThE ir BlASTEr The IR blaster allows the LG TV to control external equipment, like a cable box. 1 Connect the provided IR Blaster cable to the IR Blaster terminal on the Wireless Media Box. 2 After removing the protection paper from the IR Blaster cable, adhere it to the external equipment as shown. P R E P A R A T O N I A VIDEO L R L(MONO) AUDIO R B 3 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R VIDEO L(MONO) AUDIO R 2
/ DVI IN 1 A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN RS-232C IN I R B L A S T E R RGB IN(PC) RGB/DVI SERVICE ONLY IR Receiver NOTE When you attach the IR Blaster sensor near the remote control sensor of the external device, the signal can be detected more efficiently. OPTimAl lOCATiON OF ExTErNAl dEViCE WiTh ir BlASTEr iNSTAllEd Install the external device with the IR Blaster installed at a location it is not affected by the sig-
nal from the remote controller to the TV. When the external device with the IR Blaster installed receives the signal from the remote con-
troller simultaneously with the TV, it may not operate. Body of external device with IR Blaster installed NOTE For some external devices, the IR Blaster may not operate depending on the performance of the IR receiver. The operation may be delayed due to the sensitivity of the wireless signal. 10 ExTErNAl EqUiPmENT SETUP To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. Image shown may differ slightly from your device. CONNECTiNg WiTh A COmPONENT CABlE Connect the video outputs (Y, PB, PR) of the external equipment (digital set-top box, DVD, etc.) to the COmPONENT iN VidEO jacks labeled A or B on the Wireless Media Box. Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the COmPONENT iN AUdiO jacks on the Wireless Media Box. Turn on the external equipment.
(Refer to the external equipment's manual for operating instructions.) Select the Wireless Component1 input source using the iNPUT button on the remote control of TV. If connected to COmPONENT iN2, select Wireless Component2 input source. Refer to the user manual of the connected TV for the format of component input. 1 2 3 4 A L R VIDEO L(MONO) AUDIO R B L R VIDEO L(MONO) AUDIO R DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY 3 2
/ DVI IN 1 1 2 RGB IN(PC) E X T E R N A L E q U I P M E N T S E T U P Component input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below. L(MONO) AUDIO VIDEO VIDEO R A L R B 3 2 L R L(MONO) AUDIO R 1 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY
/ DVI IN RGB IN(PC) Component ports on the Wireless Media Box Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr 11 ExTErNAl EqUiPmENT SETUP CONNECTiNg WiTh AN hdmi CABlE Connect the HDMI output of the external equip-
ment (digital set-top box, DVD, etc.) to hdmi/
VIDEO dVi iN 1, hdmi/dVi iN 2, hdmi/dVi iN 3 or hdmi iN 4 jack on the Wireless Media Box. A L R L(MONO) AUDIO R B 3 Turn on the external equipment. DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R VIDEO L(MONO) AUDIO R A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN 2
/ DVI IN 1 RGB IN(PC) RGB/DVI Select Wireless hdmi1, Wireless hdmi2, Wireless hdmi3 or Wireless hdmi4 input source using the iNPUT button on the remote control of TV. Refer to the user manual of the connected TV for the format of HDMI input. 1 1 2 3 NOTE The Wireless Media Box can receive video and audio signals simultaneously when using an HDMI cable. If the DVD does not support Auto HDMI, you must set the output resolution appropriately. Check that your HDMI cable is version 1.3 or higher. If the HDMI cables dont support HDMI version 1.3, flick-
ering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3. A VIDEO L R L(MONO) AUDIO R B 3 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 VIDEO L(MONO) AUDIO R 2
/ DVI IN 1 RGB IN(PC) E X T E R N A L E q U I P M E N T S E T U P 12 CONNECTiNg WiTh AN hdmi TO dVi CABlE A VIDEO L R L(MONO) AUDIO R B 3 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R VIDEO L(MONO) AUDIO R 2
/ DVI IN 1 A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN I R B L A S T E R RGB IN(PC) RGB/DVI SERVICE ONLY 1 2 or Connect the digital set-top box or the DVI output of the PC to hdmi/dVi iN 1, hdmi/dVi iN 2, hdmi/dVi iN 3 or hdmi iN 4 jack on the Wireless Media Box. Connect the audio output of the digital set-top box or the PC audio output to the AUdiO iN (rgB/dVi) jack on the Wireless Media Box. Turn on the digital set-top box or the PC and the Wireless Media Box.
(Refer to the digital set-top box or the PC manual for operating instructions.) Select Wireless hdmi1, Wireless hdmi2, Wireless hdmi3 or Wireless hdmi4 input source using the iNPUT button on the remote control of TV. 1 2 3 4 E X T E R N A L E q U I P M E N T S E T U P 13 ExTErNAl EqUiPmENT SETUP CONNECTiNg WiTh rCA CABlE A L R VIDEO L(MONO) AUDIO R B L R VIDEO L(MONO) AUDIO R A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN I R B L A S T E R RGB IN(PC) RGB/DVI SERVICE ONLY DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY 3 2
/ DVI IN 1 1 or Camcorder Video Game Set Connect the AUdiO/VidEO jacks between Wireless Media Box and VCR or external equip-
A ment. COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN L(MONO) AUDIO L(MONO) AUDIO B A B VIDEO VIDEO L R L R R R I 3 2
/ DVI IN 1 OPTICAL DIGITAL SERVICE ONLY AUDIO OUT Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Or, Operate the corresponding external equipment.
(Refer to external equipment operating guide.) RGB IN (PC) RGB/DVI SERVICE ONLY R B L A S T E R Select Wireless AV2 input source using the iNPUT button on the remote control of TV. If connected to AV1 input, select Wireless AV2 input source. 1 DC IN 12V 2 3 NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUdiO l/mONO jack of the media box. E X T E R N A L E q U I P M E N T S E T U P 14 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY
/ DVI IN RGB IN(PC) RGB/DVI digiTAl AUdiO OUT SETUP You can output the Wireless Media Boxs audio signal to external audio equipment via the Optical Digital Audio Output port. This port uses a standard optical cable. L R L(MONO) AUDIO R A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN RGB IN(PC) RGB/DVI 1 SERVICE ONLY I R B L A S T E R Connect one end of an optical cable to the OPTICAL DIGITAL AUDIO OUT port on the Wireless Media Box. A VIDEO L R L(MONO) AUDIO R B 3 DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY L R VIDEO L(MONO) AUDIO R 2
/ DVI IN 1 RGB IN(PC) 2 Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment. CAUTiON Do not look into the optical output port. Looking at the laser beam may damage your vision. 1 2 L R A B L(MONO) AUDIO R COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN RGB IN (PC) RGB/DVI CONNECTiNg WiTh rgB You can also connect devices using the RGB input. This connection uses a standard VGA cable
(D-Sub 15 pin cable). This Wireless Media Box supports Plug and Play capability, meaning that the PC adjusts automatically to the Wireless Media Box's settings. R B L A S T E R SERVICE ONLY I Connect the RGB output of the PC to the rgB iN (PC) jack on the Wireless Media Box. OPTICAL DIGITAL DC IN 12V VIDEO AUDIO OUT SERVICE ONLY A L R L(MONO) AUDIO R B 3 L R VIDEO L(MONO) AUDIO R 2
/ DVI IN 1 A B COMPONENT / AV IN 1 COMPONENT / AV IN 2 AUDIO IN I R B L A S T E R 1 2 3 4 Connect the PC audio output to the AUdiO iN
(rgB/dVi) jack on the Wireless Media Box. Turn on the PC and the Wireless Media Box. Select Wireless rgB input source using the INPUT button on the remote control of TV. RGB IN(PC) RGB/DVI SERVICE ONLY 1 2 E X T E R N A L E q U I P M E N T S E T U P 15 ExTErNAl EqUiPmENT SETUP SUPPOrTEd diSPlAY rESOlUTiON RGB-PC, HDMI/DVI-PC mode Resolution 720x400 640x480 800x600 1024x768 1280x768 1360x768 1280x1024 1920x1080
(RGB-PC) 1920x1080
(HDMI-PC) Horizontal Frequency(kHz) Vertical Frequency(Hz) 31.468 31.469 37.879 48.363 47.78 47.72 63.595 66.587 67.5 70.08 59.94 60.31 60.00 59.87 59.80 60.00 59.93 60.00 NOTE There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. The synchronization input waveform for Horizontal and Vertical frequencies are separate. Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the Wireless Media Box or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the Wireless Media Box. Connect the audio cable from the PC to the Audio input on the Wireless Media Box. (Audio cables are not included with the Wireless Media Box). DOS mode may not work depending on the video card if you use an HDMI to DVI cable. If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. When an unsupported resolution or graphic card is used on the PC, it may cause some errors. E X T E R N A L E q U I P M E N T S E T U P 16 WATChiNg TV / PrOgrAm CONTrOl TUrNiNg ON ThE WirElESS mEdiA BOx Firstly, connect the power cord correctly on the Wireless Media Box. 1 At this stage, the Wireless Media Box switches to standby mode. When installing for the first time, the press the turn on the power.)
(Power) button of the Wireless Media Box to 2 3 Use the remote controller of the TV to turn on the power. The power of the Wireless Media Box will automatically be turned on. Point the remote controller toward the TV. When the power of the TV is turned on, the picture will be displayed as follows by stage accord-
ing to the wireless connecting procedure. Connecting wireless TV. If you turn on the power of the TV when the external input of the Wireless Media Box is selected, it will be displayed when the external input of the Wireless Media Box is trying to connect to the wireless network. This is the screen displayed when trying to connect wireless after connect-
ing the Wireless Ready Dongle while the TV is turned off. The screen becomes dark briefly right before the connection process is complete. Wireless Connection Wireless Connection Established. Now you can use wireless to an external input. Wireless Signal See the connection device Close When the connection is successful, the above dis-
play will disappear and the screen on the left will be displayed. This is the screen shown once the wireless connec-
tion is connected. When the connection fails, check the power of the Wireless Media Box. Left icon is to distinguish the external input of TV and the wireless external input of Wireless Media Box. After the Wireless Ready Dongle is successfully installed, wireless external input will be shown additionally in the TV menu related to external input. (Input List, Input Label, Timer, Input Block and Picture Wizard) Wireless Signal Operate the external input of Wireless Media Box using the remote controller of the TV. When you press the OK button while viewing the external input of Wireless Media Box, the information of the current input and the strength of the wireless signal will be displayed on the bottom left side.
(When you press the BACK/EXIT key, the information will disappear.) If you press the
(Power) button of the Wireless Media Box manually to turn it off when both the TV and Wireless Media Box are turned on, you will not be able to turn on the power using the remote controller of the TV. At this time, press the
(Power) button of the Wireless Media Box to turn on the power. W A T C H I N G T V
/
P R O G R A M M E C O N T R O L 17 WATChiNg TV / PrOgrAm CONTrOl iNPUT liST Only input signals which are connected to a TV or Wireless Media Box can be activated and selected. When you select the "See the connection device", you can see the connected device. Wireless Connection Wireless Connection Established. Now you can use wireless to an external input. Wireless Signal See the connection device Close Input List Move OK Antenna USB AV1 AV2 Component1 Component2 RGB HDMI2 HDMI3 HDMI4 AV1 AV2 Input Label Exit Wireless input source AV1 AV2
* This is the screen when the Wireless Ready Dongle is connected to HDMI/DVI IN 1. HDMI terminal connected to Wireless Ready Dongle is not displayed on the list of external inputs. Select your desired Source. When you change the input source, it can take up to 10 seconds depending on the wireless environment. ir BlASTEr SETUP You can control the external device (VCR, DVD player etc.) connected to the Media box from the TV using the infrared controller called IR-Blaster. Set up the TV menu as shown below. 1 2 3 Select OPTiON. Select ir Blaster. or Select On. 1 2 ENTER 3 ENTER Select OPTiON. Select ir Blaster. Select On. Press the mENU/ExiT button to return to normal TV viewing. Press the BACK button to move to the previous menu screen. W A T C H I N G T V
/
P R O G R A M M E C O N T R O L 18 APPENdix ir COdE liST DVD AUDIO BRAND PHILIPS SAMSUNG TOSHIBA PANASONIC LG DENON PIONEER HITACHI GPX CODE RC6 LC7461 NEC AV162 TC9012 LRC3715 NEC NEC SAA3004 DVR-VCR BRAND TIVO S2 SAMSUNG TOSHIBA PANASONIC PHILIPS HITACHI LG MITSUBISHI HITACHI GO VIDEO CODE uPD6121 TC9012 NEC AV162 SAA3010 NEC NEC JVC M50110 SAA3004 BRAND DENON YAMAHA MARANTZ INTEGRA, ONKYO H/K PIONEER BOSE LEXICON ROTEL CODE LRC3715 NEC SAA3010 NEC NEC NEC NEC uPD6121 uPD6121 uPD6121 SHERWOOD SAA3010 XM REALISTIC TC9148 PARASOUND TC9132P SAA3004 INSIGNIA CBL-SAT BRAND S/A,PIONEER MOTOROLA DIRECTV MOXI VOOM SAMSUNG LG PIONEER CODE D6108 MOTOROLA DIRECTV MOXI BU5962 uPD6121 NEC M50110 A P P E N D I X 19 APPENdix rF SPECiFiCATiONS Wireless Media Box Items Frequency range [GHz]
Transmission RF Output Power (Max.) [dBm]
Antenna Gain (Max.) [dBi]
Channel Table [MHz]
(Center frequency) Channel units U-NII-I 5.15~5.25 OFDM U-NII-II 5.25~5.35 OFDM U-NII-II extended 5.47~5.725 OFDM U-NII-III 5.725~5.825 OFDM 15 3.5 15 3.5 15 3.5 15 3.5 Depends on the country region (Please see the Frequency Table) Depends on the country region (Please see the Frequency Table) 2 ~ 11 Band channel used by the country could be different. Wireless Ready Dongle Items Frequency range [GHz]
Transmission RF Output Power (Max.) [dBm]
Antenna Gain (Max.) [dBi]
Channel Table [MHz]
(Center frequency) Channel units U-NII-I 5.15~5.25 OFDM U-NII-II 5.25~5.35 OFDM U-NII-II extended 5.47~5.725 OFDM U-NII-III 5.725~5.825 OFDM 16 3.5 16 3.5 16 3.5 16 3.5 Depends on the country region (Please see the Frequency Table) Depends on the country region (Please see the Frequency Table) 2 ~ 11 A P P E N D I X 20 FrEqUENCY TABlE Hongkong / Thailand Oman / Jordan / Peru / qatar South Africa / Uganda / Honduras UAE / Nicaragua / Argentina /
Brazil Australia / New Zealand US / CANADA Turkey / Saudi Arabia Algeria /Philippines Mexico / Malaysia Chile / Egypt / Bahrain India / Singapore / Venezuela Vietnam / Israel
/ Kuwait Taiwan Kenya Yemen 5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 20MHz
5.47~5.725 GHz 5.725~5.850GHz 40MHz
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 5.47~5.725 GHz 5.725~5.850GHz 20MHz 40MHz
BW\CH #36
#40
#44
#48
#52
#56
#60
#64
#100
#104
#108
#112
#116
#120
#124
#128
#132
#136
#140 5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 5.47~5.725 GHz 20MHz 40MHz
#149
#157
#153 5.725~5.850GHz
#161
#165
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 5.47~5.725 GHz 5.725~5.850GHz 20MHz 40MHz
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 5.47~5.725 GHz 20MHz 40MHz
5.725~5.850GHz
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 5.47~5.725 GHz 5.725~5.850GHz 20MHz 40MHz
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 5.47~5.65 GHz 20MHz 40MHz
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 20MHz 40MHz
5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz 20MHz 40MHz
5.47~5.57 GHz
5.47~5.725 GHz
5.47~5.65 GHz
China / Pakistan / Iran 5.15GHz ~ 5.25GHz 5.25GHz ~ 5.35GHz
20MHz 40MHz
5.725~5.850GHz
5.725~5.850GHz
5.725~5.850GHz 5.725~5.850GHz
A P P E N D I X 21 APPENdix PrOdUCT SPECiFiCATiONS MODELS Dimensions
(Width x Height x Depth) Weight Power requirement Adapter MODELS Dimensions
(Width x Height x Depth) Weight Power Consumption Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity Wireless Media Box
(AN-WL100W) 326.0 mm x 42.8 mm x 226.0 mm
(12.8 inch x 1.7 inch x 8.9 inch) 1.5 kg (3.3 lb) DC 12 V 1.1 A In : AC 100-240 V~ 50 / 60 Hz Out : DC 12 V 2.5A
(Adaptor model No. : PA-1031-1 ( LITE-ON) , EADP-30PB B (DELTA) ) Wireless Ready Dongle 148.0 mm x 23.0 mm x 78.0 mm
(5.8 inch x 0.9 inch x 3.1 inch) 0.2 kg (0.4 lb) 9 W 0 C ~ 40 C (32 F ~ 104 F) Less than 80 %
-20 C ~ 60 C (-4 F ~ 140 F) Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement. TrOUBlEShOOTiNg The video function does not work. No picture & No sound No or poor colour or poor picture Horizontal/vertical bars or picture shaking No picture when connecting HDMI Check whether the TV and the Wireless Media Box are turned on. Is the power cord inserted correctly into the adapter?
Is the adapter plug inserted correctly into the Wireless Media Box?
Adjust Colour in menu option. Are the video cables installed properly?
Activate any function to restore the brightness of the picture. Check for local interference such as an electrical appliance or power tool. Check that your HDMI cable is version 1.3 or higher. If the HDMI cables dont support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3. A P P E N D I X 22 The audio function does not work. Picture OK & No sound No output from one of the speakers No sound when con-
necting HDMI
+ or - button. Press the Sound muted? Press MUTE button. Are the audio cables installed properly?
Adjust Balance in menu option. Check HDMI cable over version 1.3. There is a problem in PC mode. (Only PC mode applied) The signal is out of range
(Invalid format) Vertical bar or stripe on Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. background &
Horizontal Noise &
Incorrect position Screen colour is unstable or single colour Use Auto configure or adjust clock, phase, or H/V position. (Option) Check the signal cable. Reinstall the PC video card. This is when there is an issue with the wireless connection. Connecting Wireless TV screen is not displayed.
" "
"Connecting wireless"
screen is displayed but the wireless input is not activated. It reconnects after wire-
less connection is estab-
lished Screen is distorted after the wireless connection. After wireless connection is established, horizontal line patterns are instantly shown on the screen. Check the connection of the 20 pin cable (Power/Control) between the Wireless Ready TV and Wireless Ready Dongle. (Refer to the p. 6) Set up the external input of TV to wireless input. Check the connection of the HDMI cable between the Wireless Ready TV and Wireless Ready Dongle. (Refer to the p. 6) Check whether the power of the Wireless Media Box is turned on. (Refer to the p. 17) Check whether an external device is connected to Wireless Media Box. Only the wireless input with the external device connected will be activated. This happens when there is wireless interference from surrounding devices or when the wireless signal is weak. Check the installation range of the Wireless Media Box. (Refer to the p. 9) This can happen when the wireless signal is weak. Check the installation range of the Wireless Media Box. (Refer to the p. 9) This can happen when there are wireless devices using 5 GHz bandwidth. Keep products that interfere with wireless reception with Wireless Media Box at least 5m away. (Refer to the p. 9) A P P E N D I X 23 APPENdix A P P E N D I X 24 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model :
Serial No. :
This device only works with compatible Wireless Ready LG LCD, LED LCD, and Plasma TVs.
This product uses the FCC Data API but is not endorsed or certified by the FCC