COGD14FGA01 CID (Central Information Display) system User manual

 

ICS User Manual GM V2 ICS CONFIDENTIAL NOT FOR DISTRIBUTION 1. Product overview and Specifications

(1) Product overview 1) ICS(Integrated Center Stack)can not be used by itself. ICS is connected to Head Unit(CSM) in the vehicle, and it displays status and information of vehicle. 2) User can use the function of Head Unit by operating ICS. 3) ICS can not be connected to any other devices except for the Head Unit. 4) ICS has below additional function to help User interface for CSM

.NFC

.IR Proximity 5) ICS is part of the body with IPC(Cluster).

(2) Specification Spec. Item Product Model Display Detail CAR Center Information Display COGD14FGA01 16.9inch is ICS Screen Operating Voltage DC 12V (9V ~ 16V) Operating Temperature

-40 ~ +85 7.2inch 14.2 inch

(Cluster) 16.9 inch

(CID) 16.9 inch 14.2 inch 7.2inch CONFIDENTIAL NOT FOR DISTRIBUTION 2. Feature list Items Screen Size Resolution Active Area Luminance Display Contrast Touch Method MCU CAN Connector Uniformity White Color Gamut Dimming Range Resolution CPU Clock Standard Data rate Frame Rate Color Depth Data Rate Interface Cable Length HSD

(12pin) Main Connector

(20pin) Specification 16.9 2940x 816 414.54x115.056mm Min. 500 cd/m2 60%

32%

Typ 10,000

>=14:1

>=10:1 80%

100%

0 ~ 100%

1024 x 540 24 MHz HS-CAN I/F up to 2 Mbit/s 60Hz 24bit 3 [Gb/s]

FPD Link III 10[M] STP 0.141(H) x 0.141(V) mm Remark H x V H x V

@Center

@+/-30degress(H)

@+/-45degress(H)

@center ambient@5,000lux ambient@45,000lux Area scan Video Interface

(2-Lane)

.Battery Power

.CAN

.Telltale Output Video Interface 2-Lane CONFIDENTIAL NOT FOR DISTRIBUTION 3. External Connector

-HSD Connector (Video Interface) Pin CN301_1 CN301_2 CN301_3 CN301_4 CN301_5 CN301_6 CN301_7 CN301_8 CN301_9 CN301_10 CN301_11 CN301_12 Signal Name Pair Drain (A) DOUT +/RIN+ (A) DOUT -/RIN- (A) Pair Drain (B) DOUT +/RIN+ (B) DOUT -/RIN- (B) NC NC NC NC NC NC Function From CSM From CSM From CSM NC (Reserved for LVM) NC (Reserved for LVM) NC (Reserved for LVM) From CSM From CSM From CSM NC (Reserved for LVM) NC (Reserved for LVM) NC (Reserved for LVM)

-Main Connector Pin Assignment Signal Name Function Pin No CN101_1 CN101_2 CN101_3 CN101_4 CN101_5 CN101_6 CN101_7 CN101_8 CN101_9 CN101_10 CN101_11 CN101_12 CN101_13 CN101_14 CN101_15 CN101_16 CN101_17 CN101_18 CN101_19 CN102_20 BATTERY HSCAN+

HSCAN+

UART_RX GND HSCAN-

HSCAN-

UART_TX OUT 01 OUT 02 OUT 03 OUT 04 OUT 05 OUT 06 OUT 07 OUT 08 OUT 09 OUT 10 LED DIM+

GND Secondary Fused Battery Positive Voltage AUTOSAR CAN Serial Data (+) AUTOSAR CAN Serial Data (+) NC GND AUTOSAR CAN Serial Data (-) AUTOSAR CAN Serial Data (-) NC Air_Bag_RED (From IPC) ABS_AMBER (From IPC) Brake_USA_RED (From IPC) Brake_RED(From IPC) Preheat_AMBER(From IPC) Seatbelt_RED(From IPC) MIL_AMBER(From IPC) Pressure_AMBER(From IPC) ESC_OFF_AMBER(From IPC) ESC_AMBER(From IPC) LED_PWR(From IPC) NC CONFIDENTIAL NOT FOR DISTRIBUTION 3. Cautions 1) Do not use the product while driving. Please operate the product after stopping the car in a safe and legal manner. 2) Do not stare at the screen(monitor) while driving. While driving, staring at the screen (monitor) can be the cause of the accident. 3) Do not open the back cover in order to prevent the risk of electric shock. There is no user-serviceable part inside the product. Please request a repair to qualified service personnel. 4) Do not expose the product to water, rain, moisture in order to reduce the risk of fire or electric shock. 5) Please maintain a low enough volume that allow signal (such as emergency sirens) outside the vehicle to be easily heard. 6) Please be careful dropped or impact. CONFIDENTIAL NOT FOR DISTRIBUTION FCC Information following two conditions :

This device complies with part 15 of the FCC Results. Operation is subject to the

(1) This Device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.

"ATTENTION: L'exposition aux rayonnements frquence radiolectrique. Antenne doit tre monte de telle manire minimiser le risque de contact humain pendant l'utilisation normale. L'antenne ne doit pas tre contact pendant le fonctionnement pour viter la possibilit de dpasser la limite de l'exposition aux frquences radio de la FCC. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) lappareil ne doit pas produire de brouillage;

2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.